DOCSLIB.ORG

Anax-Star Turboexpander Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Anax-Star Turboexpander Guide Anax-Star Turboexpander Guide The Anax-Star Turboexpander® “A clean energy solution from Anax Power” Broadway Plaza, 350 Broadway, Suite 350, Santa Monica California 90401 Clean Energy from Pressure Reduction There are streams of energy all around us, embedded in everyday functions and utilities that we taKe for granted. For all the good that solar panels and wind turbines provide, these technologies have two significant drawbacKs: they are intermittent and expensive. Energy from waste also comes in many forms, such as biomass burning, or high temperature heat reclaim for thermal generators. These technologies, too, have downsides. Biomass requires huge quantities of combustible material, generating high carbon emissions. Thermal generators, such as the Organic RanKine Cycle, require the waste heat at relatively high temperatures, and have a low heat to electricity conversion ratio. Now there is a new approach to renewable energy that neatly steps past all of these downsides, drawbacKs and disadvantages. It provides a way to recover energy with a high conversion ratio, improving the efficiency of our natural gas supply pipelines. The Anax-Star Turboexpander®(ASTE) is a proprietary technology that is based on well- established scientific principles, integrating world-leading expertise in several fields to deliver clean energy from waste. The ASTE combines natural gas pressure reduction with low-grade waste heat to convert the enthalpy reduction in the pressure let-down to grid-ready electricity. The gas is delivered to the downstream users at the right pressure and temperature, while the waste heat is absorbed bacK into the gas stream. The electricity output is available for use locally or for export to the distribution grid at renewable energy rates. Clean Each ASTE pacKage configured for waste heat recovery will generate up to 6 MWh per day with zero carbon emissions. This level of electrical generation could be worth over $250,000 per year if sold to the grid or could be used to offset site electrical consumption to avoid the need for a larger electrical service equipment when processes are being expanded. Putting waste heat bacK into the gas supply also reduces heat emissions from the site and can reduce site water consumption by up to a ton (2,000 pounds) per hour. Cool The ASTE system does not need the waste heat to be any warmer than 150°F – a much lower temperature than most ORC systems which, which need the heat to be available at a minimum of 300°F, if the system is to be cost effective. Using low-grade waste heat allows the ASTE to be used in more systems than if it were to require warmer heat. The ASTE’s heat transfer system for cooling the inverter’s power electronics also allows the efficiency losses from the electronics to be recovered and fed bacK into the gas networK. Compact At the core of the ASTE is a two-stage turboexpander running at speeds up to 25,000 revs per minute. This high speed enables the turbine wheels to be smaller than normal, with a diameter of less than 6” each. The turbines use patented active magnetic bearings which are oil-free and are smaller than any comparable load-bearing technology. To capitalize on wheel’s size the generator uses world-leading permanent magnet technology, pacKing a 350hp generator into a module no bigger than a squeezebox. The system uses bacK-to-bacK plate-shell heat exchangers to feed the waste heat into the gas stream in two stages. Finally, the entire 250 KW sKid is only seven feet wide, seven feet high, and thirteen feet long, capable of fitting into a standard intermodal shipping container. Variable The combination of a permanent magnet generator and ultra-high frequency inverter enables the ASTE to operate across a wide range of inlet pressures without losing stability. This stability solves a major obstacle to turbines achieving widespread acceptance in gas pressure reduction applications; the need for stable inlet and outlet conditions in order to deliver at the correct frequency. The gas distribution system uses a wide pressure variation to buffer stocKs of gas within the system, so the inlet pressure to the gas regulating system can be highly variable. The ASTE rides these variations with ease. Versatile The ASTE is sealed within a hermetic pressure casing and can stand inlet pressures up to 975psig, enabling it to be used in the main bacKbone of the gas distribution networK. The high pressure variant is optimised for an outlet pressure of 450psig with a nominal inlet pressure of 750psig (but capable of varying between 900psig and 600psig). There are also two medium pressure variants of the ASTE. The high ratio version is optimised for an inlet pressure of 350psig and outlet pressure of 80psig and the low ratio version is optimised for 300psig inlet and 180psig outlet. Adaptable One of the unique benefits of the ASTE package is that it has been designed to suit a wide variety of applications by adding one of the auxiliary heat pacKages alongside the basic unit. If waste heat at 150°F is not available to power the energy conversion process, then a gas engine can be deployed to provide a suitable source of heating together with some auxiliary power generation. The gas engine can be a recip engine or a microturbine CHP unit. Alternatively, if the ASTE is used on a gas regulating station, for example in a citygate application, then a gas-fired reheater can be used to provide the necessary reheat in the expansion process. Heat is applied to the ASTE before the first stage of expansion, heating the incoming gas to 130°F and between the two stages, reheating the gas to the same level to ensure that the outlet from the pacKage is never lower than 50°F. Strong The ASTE pacKage is assembled on a single steel skid, maKing it easy to transport. The frame is epoxy painted for long-life corrosion resistance. All of the unit gas and water pipes are welded steel, also epoxy painted and the wetted parts of the heat exchangers are corrosion-resistant 316L stainless steel. The ASTE casing and the heat exchangers are designed in accordance with ASME VIII, with all welding to ASME IX. The pacKage unit is designed to be installed outdoors and can even be placed in hazardous locations (Class 1 Division 2 Group D Temperature Class T3). All sKid mounted equipment meets this requirement as a minimum, including the control panel. Electricity generated is metered via a revenue grade meter. The control panel is manufactured in type 304 stainless steel and conforms to NFPA 496: Control Panels for use in Hazardous Locations, Class 1 Division 2 for Purged and Pressurised Enclosures. The frame and pipeworK are designed to be suitable for installation in seismic zones 1 – 4. Safety valves and control valves meet the requirements of the American Petroleum Institute’s standard API617, including the safety valves in the water cooling circuit. The complete pacKage is certified to UL1741 and is suitable for grid connection. Secure The ASTE incorporates a sequence of safety devices to protect the unit from off-design conditions. The expander has a bypass valve to handle excess gas flow and to equalise pressures in the event of an emergency stop. Each heat exchanger is fitted with a pressure relief valve, piped to atmosphere. The electrical circuits are protected against power isolation with an anti-islanding relay and the inverter includes an integral speed regulator to monitor the turbine speed and ensure that it does not exceed safe limits. In the event of an inverter fault, the system will shut down using dynamic braKing resistors and a bypass valve to bring the turbine to rest quicKly and safely. The bearings are designed to bring the shaft to rest safely in the event of a sudden loss of power to the magnetic bearings. Smart The unit control system incorporates a full diagnostic suite which monitors Key parameters such as temperature, pressure, shaft speed, electrical output and bearing function and posts warning, alarm and shutdown alerts. The unit records electrical output and can provide a metered record of performance by remote connection. The control panel is equipped with a touch screen interface panel which provides access to real-time operating parameters, performance trends, control setpoints and instrument calibration. Capacity Power Inlet Outlet Inlet Outlet Preheat Reheat Gas Gas Heat PR Output Pressure Pressure Temp Temp Input Input Flow Flow Conv kW psig psig °F °F MMB/h* MMB/h* scfm lb/min % - High Pressure Range 250 750 200 60 59 0.71 0.76 6711 294.5 58.0% 3.56 250 750 325 60 82 1.09 0.81 10274 450.7 44.9% 2.25 250 750 450 60 108 1.73 1.11 16330 716.4 30.0% 1.65 Medium Pressure Range 250 350 80 60 58 0.60 0.67 6162 270.3 67.2% 3.86 250 325 130 60 83 0.92 0.71 9463 415.1 52.4% 2.35 250 300 180 60 100 1.59 0.74 16489 716.4 36.5% 1.62 Low Pressure Range 250 180 40 60 62 0.61 0.63 6433 282.2 68.7% 3.57 250 150 60 60 85 0.94 0.66 10047 440.8 53.4% 2.21 250 120 80 60 110 2.05 0.82 21917 961.5 29.8% 1.42 *MMB/h is one million BTU/h. 1MMB/h = 293KW of heat The table shows typical performance criteria for three pressure ratings of the ASTE, with three pressure ratio bands for each range.
Load more

Recommended publications
  • Olefins Recovery CRYO–PLUS ™ TECHNOLOGY 02
    Olefins Recovery CRYO–PLUS ™ TECHNOLOGY 02 Refining & petrochemical experience. Linde Engineering North America Inc. (LENA) has constructed more than twenty (20) CRYO-PLUS™ units since 1984. Proprietary technology. Higher recovery with less energy. Refinery configuration. Designed to be used in low-pressure hydrogen-bearing Some of the principal crude oil conversion processes are off-gas applications, the patented CRYO-PLUS™ process fluid catalytic cracking and catalytic reforming. Both recovers approximately 98% of the propylene and heavier processes convert crude products (naphtha and gas oils) components with less energy required than traditional into high-octane unleaded gasoline blending components liquid recovery processes. (reformate and FCC gasoline). Cracking and reforming processes produce large quantities of both saturated and Higher product yields. unsaturated gases. The resulting incremental recovery of the olefins such as propylene and butylene by the CRYO-PLUS™ process means Excess fuel gas in refineries. that more feedstock is available for alkylation and polym- The additional gas that is produced overloads refinery erization. The result is an overall increase in production of gas recovery processes. As a result, large quantities of high-octane, zero sulfur, gasoline. propylene and propane (C3’s), and butylenes and butanes (C4’s) are being lost to the fuel system. Many refineries Our advanced design for ethylene recovery. produce more fuel gas than they use and flaring of the ™ The CRYO-PLUS C2= technology was specifically excess gas is all too frequently the result. designed to recover ethylene and heavier hydrocarbons from low-pressure hydrogen-bearing refinery off-gas streams. Our patented design has eliminated many of the problems associated with technologies that predate the CRYO-PLUS C2=™ technology.
    [Show full text]
  • Advanced Multivariable Control of a Turboexpander Plant
    Bryan Research and Engineering, Inc. - Technical Papers Advanced Multivariable Control of a Turboexpander Plant DAN ALTENA, MICHAEL HOWARD, Union Pacific Resources Group, Inc. KEITH BULLIN, JOEL CANTRELL, Bryan Research & Engineering, Inc., Bryan, Texas ABSTRACT This paper describes an application of advanced multivariable control on a natural gas plant and compares its performance to the previous conventional feed-back control. This control algorithm utilizes simple models from existing plant data and/or plant tests to hold the process at the desired operating point in the presence of disturbances and changes in operating conditions. The control software is able to accomplish this due to effective handling of process variable interaction, constraint avoidance, and feed- forward of measured disturbances. The economic benefit of improved control lies in operating closer to the process constraints while avoiding significant violations. The South Texas facility where this controller was implemented experienced reduced variability in process conditions which increased liquids recovery because the plant was able to operate much closer to the customer specified impurity constraint. An additional benefit of this implementation of multivariable control is the ability to set performance criteria beyond simple setpoints, including process variable constraints, relative variable merit, and optimizing use of manipulated variables. The paper also details the control scheme applied to the complex turboexpander process and some of the safety features included to improve reliability. Proceedings of the Seventy-Seventh GPA Annual Convention. Tulsa, OK: Gas Processors Association, 1998. Bryan Research & Engineering, Inc. Visit our Engineering Resources page for more articles. INTRODUCTION The UPR Gulf Plains Plant located 13 miles northwest of Bishop, Texas has been processing gas from the nearby Stratton gas field for more than 50 years.
    [Show full text]
  • Computational Fluid Flow Analysis of Cryogenic Turboexpander
    Computational Fluid Flow Analysis of Cryogenic Turboexpander A Thesis Submitted in Partial Fulfilment of the Requirements for the Award of the Degree of Master of Technology in Thermal Engineering by Hitesh Dimri Department of Mechanical Engineering National Institute of Technology, Rourkela Rourkela-769008, Odisha, INDIA May 2013 Computational Fluid Flow Analysis of Cryogenic Turboexpander A Thesis Submitted in Partial Fulfilment of the Requirements for the Award of the Degree of Master of Technology in Thermal Engineering by Hitesh Dimri (Roll – 211ME3188) Under the Guidance of Prof. Ranjit Kumar Sahoo Department of Mechanical Engineering National Institute of Technology, Rourkela Rourkela-769008, Odisha, INDIA 2011-2013 DEPARTMENT OF MECHANICAL ENGINEERING NATIONAL INSTITUTE OF TECHNOLOGY ROURKELA, ODISHA-769008 CERTIFICATE This is to certify that the thesis entitled “Computational Fluid Flow Analysis of Cryogenic Turboexpander” by Hitesh Dimri, submitted to the National Institute of Technology (NIT), Rourkela for the award of Master of Technology in Thermal Engineering, is a record of bona fide research work carried out by him in the Department of Mechanical Engineering, under my supervision and guidance. I believe that this thesis fulfills part of the requirements for the award of degree of Master of Technology. The results embodied in the thesis have not been submitted for the award of any other degree elsewhere. Place: Rourkela Prof. Ranjit Kumar Sahoo Date: Department of Mechanical Engineering National Institute of Technology Rourkela Odisha-769008 i ACKNOWLEDGEMENT I am extremely fortunate to be involved in an exciting and challenging research project like “Computational Fluid Flow Analysis of Cryogenic Turboexpander”. It has enriched my life, giving me an opportunity to work in a new environment of ANSYS CFX.
    [Show full text]
  • Turbo Expander Technology Contribution in Development of Ethylene Plant Process
    Turbo Expander Technology Contribution in Development of Ethylene Plant Process Agahi, Reza Atlas Copco Gas and Process Irvine, CA, USA Ershaghi, Behrooz Atlas Copco Gas and Process Reza Agahi is Marketing Manager and responsible for Irvine, CA, USA worldwide business development of geothermal and waste heat energy recovery for Atlas Copco, Gas and Process Division. Behrooz Ershaghi is presently VP R&D at Atlas Copco Gas He has more than 30 years’ experience in turbo expander and Process. He has held several positions over his 40 years design, its applications in cryogenic plants and energy career in Gas processing, Turboexpander and Rotating recovery. He has taught in universities in Southern California equipment industries with Atlas Copco and GE Oil & Gas. and has authored more than 40 articles and papers in system Behrooz has authored several papers in Turboexpander design engineering, expander applications and energy recovery. Dr. and applications and co-inventor of several GE Rotoflow and Agahi is the inventor or co-inventor of several Rotoflow Atlas Copco Rotoflow patents. He received his B. S. in expander patents. Chemical Engineering from Tehran Polytechnic, M. S. in Petroleum Engineering, and PhD in Chemical Engineering, from the University of Southern California. Al Halaki, Saleh Chief Project & Engineering Officer (CPEO) Major projects Dept. Qatar Petrochemical Company (QAPCO) Doha, Qatar Mayne, Trevor Lead Machinery Engineer Saleh Al Halaki has vast experience in petrochemical industry. Qenos Altona Olefins For the past 27 years associated with QAPCO from Trainee Melbourne, Victoria, Australia Engineer to current position as CPEO. Joined QAPCO in 1988 as Trainee Engineer and held several Trevor Mayne is the Lead Machinery Engineer for the Qenos positions in Plant Operation & Projects Management during Altona Olefins refinery.
    [Show full text]
  • How to Choose the Best Expansion Turbine ?
    Kalina & Organic Rankine Cycles: How to Choose the Best Expansion Turbine ? Dr Frédéric Marcuccilli, Senior Process Engineer Hervé Mathiasin, Sales Engineer Electricity generation from Enhanced Geothermal Systems Strasbourg 14-16th of September, 2006 www.cryostar.com [email protected] 1 Contents 1. General Presentation 1.1 Cryostar in figures 1.2 Cryostar in the market place 1.3 Cryostar new markets 2. Radial Turbines for Binary Cycles 2.1 Radial inflow turbine 2.2 Expander wheel design 2.3 Designing for best efficiency 2.4 Sealing system 3. ORC Cycle Optimisation 4. Conclusion 2 1. General Presentation Who is Cryostar ? 350 employees 1.1 Cryostar in figures 145 Million € turnover in FY 2006 90% export 15 Million € investments in 2005-07 Part of the new Skid mounted HC turboexpanders Boil-Off gas reliquefaction unit High pressure reciprocating pump 3 1. General Presentation 1.2 Cryostar in the market place Recognised as worldwide experts in the following areas: Industrial gases No.1 in the application of cryogenic and industrial gas pump sectors Oil & Gas One major supplier of turbo-expander/compressors in oil & gas treatment (HC dewpointing, ethylene plants) LNG carriers Oil & Gas LNG No.1 in « boil-off » gas handling and recovery (90% market Clean energy share) Energy recovery Industrial gas Principal supplier of energy recovery expanders for « geo- pressure » application on natural gas grids (30 MW installed in Europe in the last 20 years plus North America ongoing) 4 1. General Presentation 1.3 Cryostar new markets Geothermal and heat recovery expansion turbines TG: Turboexpander generator type In construction: one TG500 delivering ca 3.3 MWelec for Siemens Kalina cycle in Unterhaching (Bavaria/Germany) Ongoing project: other TG500 for Siemens Kalina cycle in Offenbach/Bellheim Pre-selected for Soultz Hot Dry Rock ORC Project Pre-selected for Innamincka Kalina Project 5 2.
    [Show full text]
  • Capital Cost Study
    Capital Cost and Performance Characteristic Estimates for Utility Scale Electric Power Generating Technologies February 2020 Independent Statistics & Analysis U.S. Department of Energy www.eia.gov Washington, DC 20585 This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA’s data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this report therefore should not be construed as representing those of the U.S. Department of Energy or other federal agencies. U.S. Energy Information Administration | Capital Costs and Performance Characteristics for Utility Scale Power Generating Technologies i February 2020 Capital Cost and Performance Characteristic Estimates for Utility Scale Electric Power Generating Technologies To accurately reflect the changing cost of new electric power generators for AEO2020, EIA commissioned Sargent & Lundy (S&L) to evaluate the overnight capital cost and performance characteristics for 25 electric generator types. The following report represents S&L’s findings. A separate EIA report, “Addendum: Updated Capital Cost and Performance Characteristic Estimates for Utility Scale Electricity Generating Plants in the Electricity Market Module (EMM) of the National Energy Modeling System (NEMS),” details subsequent updates to the EMM module. The following report was accepted by EIA in fulfillment of contract number 89303019-CEI00022. All views expressed in this report are solely those of the contractor and acceptance of the report in fulfillment of contractual obligations does not imply agreement with nor endorsement of the findings contained therein. Responsibility for accuracy of the information contained in this report lies with the contractor.
    [Show full text]
  • 500Kw Anax Turboexpander (ATE) Reducing Natural Gas Pressure: Wasted Energy, Wasted Opportunity!
    500kW Anax Turboexpander (ATE) Reducing Natural Gas Pressure: Wasted Energy, Wasted Opportunity! Natural Gas Pressure Regulating Stations maintain acceptable operating pressure in hundreds of thousands of miles of pipelines across the U.S. These stations make up an integral part of the country’s natural gas infrastructure, but are inefficient and waste easily accessible, lucrative energy. Gas Letdown Generators (GLGs) generate renewable energy from the flow of natural gas through pressure regulating stations. By employing an inline turboexpander, these systems generate electricity by expanding natural gas to an appropriate outlet pressure and temperature. Despite the benefits, this technology has yet to achieve widespread adoption due to high cost, safety risks, and an inability to handle fluctuating inlet pressures. By harnessing wasted energy in pressure regulating stations, the ATE improves overall efficiency in the natural gas supply chain. The renewable electricity from the ATE can be fed directly into the power grid or can be used to offset the captive load of large natural gas and electricity customers, making it an integral part of corporate sustainability goals. The ATE can unlock new business models that boost profitability through cost savings and increased revenue. By converting the flow of natural gas to electricity, gas companies, pipeline operators, and end-users of natural gas can maximize the return on their natural gas assets, without increasing risk. ATE A 250kW Anax-Star prototype systems can increase a company’s bottom line by anywhere from $100k to Turboexpander (ASTE) was field +$1M per year by generating 400kW to 5+ MW of electricity. Possible evaluated by GTI at the DNV GL arrangements to achieve this benefit include power purchase agreements, Flow Centre in the UK, and was revenue sharing, electricity cost savings, renewable energy credits, and other found to overcome obstacles financial models.
    [Show full text]
  • Full Load, Full Speed Test of Turboexpander-Compressor with Active Magnetic Bearings
    FULL LOAD, FULL SPEED TEST OF TURBOEXPANDER-COMPRESSOR WITH ACTIVE MAGNETIC BEARINGS by Frank Davis Engineering Consultant Doha, Qatar Reza Agahi Consultant Irvine, California and Randy Wu Senior Engineer GE Oil & Gas Rancho Dominguez, California Frank Davis is an Engineering Consultant with ExxonMobil, Randy Chih-Chien Wu is a Senior Engineer with GE Oil & Gas assigned to Ras Laffan LNG Company Ltd., in Doha, Qatar. He has Operations LLC-North America, in Rancho Dominguez, California. more than 30 years of experience in the field of rotating machinery. He began his career with Rotoflow Corporation (now part of GE Oil Mr. Davis specializes in project engineering for machinery & Gas) as Thermodynamic Design and Test Engineer for expander applications, bid reviews, and machinery acceptance testing. After and compressor products. In his 19 years of working experience, he 20 years machinery engineering experience with Exxon and Mobil has been involved in various disciplines in designing and developing Corporations, he was a member of the Project Task Force managing of expander and compressor products. His current responsibilities the engineering and construction of four LNG plants in the State of are focusing on risk review and NPI activities as well as test and Qatar over the past 10 years. He has developed specifications, commission operation of expander and compressor product. completed bid reviews, and followed manufacturing, testing, and Mr. Wu received a B.S. degree (Physics and Mechanical participated in the startup of more than 40 machinery trains including Engineering, 1976) from Chung Yuan University and an M.S. degree 65 MW gas turbine driven refrigeration compressors and gas (Mechanical Engineering, 1983) from the University of Nebraska at expander/compressor units.
    [Show full text]
  • Fundamentals of Turboexpanders “Basic Theory and Design”
    Fundamentals of Turboexpanders “Basic Theory and Design” Edited Date: September 16, 2015 Presented By: Mr. James Simms Simms Machinery International, Inc. 2357 “A” Street Santa Maria, CA 93455 U.S.A. About the Author In a Gas Processing Plant, the purpose of the James (Jim) Simms has been involved with the Turboexpander is to efficiently perform two (2) design, manufacture, and service of Turboexpanders distinctly different, but complimentary, functions in and other Cryogenic Rotating Machinery since 1969. a single machine. The primary function is to He worked in the Engineering Department of various efficiently generate refrigeration in the process gas Turboexpander manufacturing companies until he stream. This is done by the Expansion Turbine end founded Simms Machinery International, Inc. in efficiently extracting the potential heat energy from 1988. The company primarily focuses on LNG Boil-off the gas stream, causing it to cool dramatically. This Gas Compressors aboard LNG Tankers (Ships). In extracted energy is converted to mechanical energy 1994 he, along with others, founded Gas Technology to rotate the Shaft to the Booster Compressor end of Turbomachinery Services, Inc. to service the Turboexpander, which partially recompresses Turboexpanders, primarily used in Gas Processing the residue gas stream. The Turboexpander Plants. operates according to the thermodynamic and aerodynamic laws of physics. When designed Introduction/Description properly, the Turboexpander can yield very high efficiencies at the "Design Point" and reasonable The term "Turboexpander", Figure 1, is normally efficiencies at other, or "Off-Design", Points. used to define an Expander/Compressor machine as a single unit. It consists of two (2) primary Application components; the Radial Inflow Expansion Turbine and a Centrifugal (Booster) Compressor combined as The typical Turboexpander process installation is an assembly.
    [Show full text]
  • On the Possibility of Using CHP from a 1.4 MW Direct Fuel Cell At
    International Conference on Renewable Energies and Power Quality (ICREPQ’13) Bilbao (Spain), 20th to 22th March, 2013 Renewable Energy and Power Quality Journal (RE&PQJ) ISSN 2172-038 X, No.11, March 2013 On the Possibility of Using CHP From a 1.4MW Direct Fuel Cell at Kettering University Engineering Building – A Demonstration Study 1Etim U. Ubong, 2Uwem Ubong, 1Vipul Laddha, 1Pouyan Pourmovahed 1 Mechanical Engineering Department Center for Fuel Cell Research & Powertrain Integration 1700 University Ave, Flint, MI USA. Phone: +1-810- 762-7436, e-mail: [email protected]; [email protected]; [email protected] 2 Department of Environmental Chemistry, Akwa Ibom University of Technology, A’Ibom State Uyo, Nigeria e-mail: [email protected] Abstract. The concept of using a distributed power system in terms of efficiency, economics and generation and a combined heat and power principle – CHP in environmental benefits. Combined heat and power public buildings, commercial facilities is widely gaining public implies the use of waste heat from a high temperature fuel acceptance as a result of reduced energy cost, reliable power cell – in this case, to generate additional power and the supply and environmental and health issues. By using the recovered heat is used for various heating and cooling o exhaust heat from a high temperature fuel cell at 400 C for purposes. The bottoming cycle is the use of the exhaust cogeneration, space heating, to provide warm water for facility heat from the primary power plant to generate power in a use - (swimming pool and sporting locker room) and cooling in secondary power unit.
    [Show full text]
  • An Evaluation of the Possibilities of Using Turboexpanders at Pressure Regulator Stations
    Open Access Journal Journal of Power Technologies 97 (4) (2017) 289–294 journal homepage:papers.itc.pw.edu.pl An evaluation of the possibilities of using turboexpanders at pressure regulator stations Andrzej J. Osiadacz, Maciej Chaczykowski∗, Małgorzata Kwestarz aWarsaw University of Technology, District Heating and Natural Gas Systems Division, Nowowiejska 20, 00-653 Warszawa, Poland Abstract Natural gas in Poland is transported by onshore pipelines with a maximum operating pressure of up to 8.4 MPa. The gas pressure is then reduced to 1.6 MPa or 0.4 MPa for delivery to regional/local distribution networks or to end-user installations. The pressure reduction is usually performed by a pressure regulator. Pressure reduction can also be achieved through expansion of the gas at the turboexpander, which can be harnessed to produce electricity from the recovered mechanical energy of the gas. The main objective of this study is to investigate the factors influencing the efficiency of the gas expansion process and to carry out a feasibility study involving the application of turboexpanders at selected natural gas pressure regulator stations belonging to the Polish transmission system operator Gaz System S.A. Keywords: pressure regulator, turboexpander, waste energy recovery, city-gate station, pressure let-down station 1. Introduction of the pressure regulator. These phenomena have a very adverse influence on pipelines and station equipment, there- A gas pressure regulating and metering station (city gate fore it is common practice in high pressure regulator stations station) consists of technical equipment and process control to preheat the gas before it enters the pressure regulator.
    [Show full text]
  • Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup and Oxygen Separation Equipment”
    A national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy National Renewable Energy Laboratory Innovation for Our Energy Future Equipment Design and Cost Subcontract Report NREL/SR-510-39943 Estimation for Small Modular May 2006 Biomass Systems, Synthesis Gas Cleanup, and Oxygen Separation Equipment Task 1: Cost Estimates of Small Modular Systems Nexant Inc. San Francisco, California NREL is operated by Midwest Research Institute ● Battelle Contract No. DE-AC36-99-GO10337 Equipment Design and Cost Subcontract Report NREL/SR-510-39943 Estimation for Small Modular May 2006 Biomass Systems, Synthesis Gas Cleanup, and Oxygen Separation Equipment Task 1: Cost Estimates of Small Modular Systems Nexant Inc. San Francisco, California NREL Technical Monitor: Kelly Ibsen Prepared under Subcontract No. ACO-5-44027 National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 • www.nrel.gov Operated for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy by Midwest Research Institute • Battelle Contract No. DE-AC36-99-GO10337 This publication was reproduced from the best available copy Submitted by the subcontractor and received no editorial review at NREL NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.
    [Show full text]