DOCSLIB.ORG

758-919, Wireless Access Point

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
758-919, Wireless Access Point 758-919 Wireless Access Point 41 X (0.5 … 9.5) 73.8 RESET 48 8 Ø 6.6 11.5 The Wireless Access Point enables wireless access to a machine or system. This wireless The Wireless Access Point is designed for through-panel mounting (cut-out = 50.5 mm) in transmission can be performed via WLAN (IEEE802.11a/b/g/d/n/r), Bluetooth® or Blue- the control cabinet. The Wireless Access Point is inserted through the panel cut-out and tooth® Low Energy in different operating modes. For example, a tablet or smartphone can screwed from the opposite side via M50 nut. Wiring is performed inside the control cabi- be used to access the control system of a machine via a radio connection. The device can net. The external side of the housing meets the IP67 protection class. also be configured to integrate a machine or system into an existing wireless network (e.g., WLAN network) as a client. In the third main operating mode, a wireless transmission Note: link for ETHERNET protocols (e.g., PROFINET, Modbus/TCP, EtherNet/IPTM) can be estab- The Wireless Access Point is compatible with the Wireless ETHERNET Gateway. These lished between two devices. In this gateway mode, the device is used as a cable substi- devices can be used jointly in a network. tute to create a robust, industry-proven Bluetooth® or WLAN link between two automation devices. Description Item No. PU Technical Data 758-919 1 Wireless Access Point Wireless technology Bluetooth® 2.1; Bluetooth® 4.0 (Low Energy); WLAN: IEEE 802.11 a, b, g, n, d, r Frequency band ISM band, 2.4 GHz (Bluetooth®, WLAN); ISM band, 5 GHz (WLAN) ETHERNET protocols IP; TCP; UDP; HTTP; LLDP; ARP; DHCP Client/Server; Approvals DNS support; Transparent transmission of PROF- 1 Conformity marking INET IO; EtherNet/IPTM; Modbus-TCP or another UL 61010 E198726 TCP/UDP-based protocol FCC Antenna Internal broadband antenna for 2.4 GHz and 5 GHz IC: 5325A-0965, for indoor use only (5 GHz) Transmission range Up to 200 m in open air* Power supply 19 ... 36 VDC Power consumption (max.) 1.7 W Configuration Web-Based Management Technical Data WLAN Connectors RJ-45; 10/100BASE-T (Auto MDI/MDIX & Transmitter power 15 dBm EIRP cross-over detection); PoE supply: Operating modes Wireless Access Point, Wireless Client or 44 ... 57 VDC; DTE type 1 per IEEE 802.3af Gateway Mode Dimensions Height: 75 mm (91 mm with connector) Communication standards IEEE 802.11 a, b, g, n, d, r Outside height: 41 mm; Diameter: 68 mm Maximum number of clients 7 Weight 84 g Data rate (net) (max.) 65 Mbit/s Surrounding air temperature (oper- Security WEP 64/128; WPA; WPA-PSK and WPA2; TKIP and ation) -40 … +65 °C AES/CCMP; LEAP; PEAP including MS-CHAP Surrounding air temperature (storage) −40 … +85 °C Bluetooth® 2.1 Protection type Top (outside of unit): IP66/IP67/UL NEMA 4X ; Transmitter power 11 dBm EIRP Base (inside of unit): IP21 Supported profiles PAN (PANU & NAP) Mounting M50 through-panel installation (cut-out = Operating modes Access Point, Client or Gateway Mode 50.5 mm) Maximum number of clients 7 Data rate (net) 1 Mbit/s Security NIST-Compliant; FIPS-Approved (authentication and authorization, encryption and data security, privacy and discretion) Bluetooth® 4.0 (Low Energy) Transmitter power 7 dBm EIRP Supported profiles GAT T *The maximum range in the field decreases within buildings and varies depending on Operating modes Central device building materials and spatial geometry. Therefore, range specifications within build- Maximum number of clients 7 ings can only represent a typical value that can normally be achieved. More detailed Data rate (net) 200 Kbit/s information is available in the manual. Security AES-CCM encryption WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Phone: +49(0)571/887-0 Email: [email protected] Subject to changes 13.11.20 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago.com.
Load more

Recommended publications
  • RUCKUS® R550 Indoor Wi-Fi 6 (802.11Ax) Access Point for Dense Environments
    DATA SHEET RUCKUS® R550 Indoor Wi-Fi 6 (802.11ax) Access Point for Dense Environments Wi-Fi capacity requirements in classrooms, office spaces, and medium-size venues are rising due to the increase in the number of Wi-Fi connected devices. An increase in bandwidth requirements for applications and an ever-growing assortment of IoT devices puts further strain on already stretched Wi-Fi Benefits networks. Stunning Wi-Fi performance The RUCKUS® R550 access point (AP) with the latest Wi-Fi 6 (802.11 ax) technology delivers the Mitigate interference and extend coverage with patented BeamFlex®+ adaptive antenna technology ideal combination of increased capacity, improved coverage and affordability in dense utilizing several directional antenna patterns. environments. The R550 is our mid- range dual-band, dual-concurrent AP that supports four spatial streams (2x2:2 in 2.4GHz/5GHz). The R550 supports peak data rates of up to 1774 Mbps and Serve more devices efficiently manages up to 512 clients connections. Connect more devices simultaneously with four MU- MIMO spatial streams and concurrent dual-band Also, wireless requirements within enterprises are expanding beyond Wi-Fi with BLE, Zigbee and 2.4/5GHz radios while enhancing device performance. many other non-Wi-Fi wireless technologies resulting in creation of network silos. Enterprises need a unified platform to eliminate network silos. The RUCKUS AP portfolio is equipped to solve these Converged Access Point challenges. Allows customers to eliminate siloed networks and unify WiFi and non-WiFi wireless technologies into one single The R550 has built-in IoT radios with onboard BLE and Zigbee capabilities.
    [Show full text]
  • IEEE 802.11 Standard Has Been Around Since 1997, Work Continues to Make It More Adaptable to the Demand for Higher Data Rates and True Wireless flexibility
    Although the IEEE 802.11 standard has been around since 1997, work continues to make it more adaptable to the demand for higher data rates and true wireless flexibility. William Stallings IEEE 802.11: Moving Closer to Practical Wireless LANs ireless LANs have quickly be- began relying more on inexpensive twisted-pair come a significant niche in the cabling for LANs—in particular Category 3 and LAN market. As adjuncts to Category 5 unshielded twisted pair. Category 3 traditional wired LANs, they sat- wiring is the traditional telephone wiring found Wisfy mobility, relocation, and ad hoc networking in every office building; category 5 wiring is requirements and provide a way to cover loca- higher-performance wiring able to carry higher tions that are difficult to wire. data rates. Many older buildings are prewired As the name suggests, a wireless LAN uses a with an abundance of Category 3 cable, and many wireless transmission medium. Until relatively newer buildings are prewired with Category 5. recently, few organizations used wireless LANs Thus, there was little motivation to replace wired because they cost too much, their data rates were LANs with wireless. too low,they posed occupational safety problems This is not true of all environments, how- because of concerns about the health effects of ever. For some, the motivation to use wireless electromagnetic radiation, and the spectrum used LANs is much higher. Buildings with large open required a license. Today, however, these prob- areas, such as manufacturing plants, stock lems have largely diminished, and wireless LAN exchange trading floors, and warehouses, make popularity is skyrocketing.
    [Show full text]
  • Wireless Networking Best Practices Guide
    Oracle® MICROS Hardware Wireless Networking Best Practices Guide E80342-07 October 2020 Oracle MICROS Hardware Wireless Networking Best Practices Guide, E80342-07 Copyright © 2011, 2020, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable: U.S. GOVERNMENT END USERS: Oracle programs (including any operating system, integrated software, any programs embedded, installed or activated on delivered hardware, and modifications of such programs) and Oracle computer documentation or other Oracle data delivered to or accessed by U.S. Government end users are "commercial computer software" or “commercial computer software documentation” pursuant to the applicable
    [Show full text]
  • Wireless Networking Summary 11-4 Bluetooth, Wimax, and RFID Questions and Problems
    11_0131358383_ch11s.qxd 8/1/08 1:04 PM Page 412 Wireless 11 Networking CHAPTER 11_0131358383_ch11s.qxd 8/1/08 1:04 PM Page 413 CHAPTER OUTLINE 11-1 Introduction 11-5 Securing Wireless LANs 11-2 The IEEE 802.11 Wireless LAN 11-6 Configuring a Point-to-Multipoint Standard Wireless LAN: A Case Study 11-3 802.11 Wireless Networking Summary 11-4 Bluetooth, WiMAX, and RFID Questions and Problems OBJECTIVES ● Define the features of the 802.11 wireless ● Examine how site surveys are done for wire- LAN standard less LANs ● Understand the components of the wireless ● Investigate the issues of securing a wireless LAN LAN ● Explore how wireless LANs are configured ● Explore how to configure a point-to-multi- point wireless LAN KEY TERMS WLAN pseudorandom WiMAX Basic Service Set (BSS) hopping sequence BWA ad hoc OFDM NLOS access point U-NII last mile transceiver MIMO Radio Frequency Extended Service Set Wi-Fi Identification (RFID) (ESS) SSID backscatter hand-off site survey Slotted Aloha roaming inquiry procedure beacon CSMA/CA paging procedure WPA DSSS piconet EAP ISM pairing RADIUS FHSS Passkey 413 11_0131358383_ch11s.qxd 8/1/08 1:04 PM Page 414 11-1 INTRODUCTION WLAN This chapter examines the features and technologies used in the wireless local area Wireless local area network network (WLAN). Wireless networking is an extension of computer networks into the RF (radio frequency) world. The WLAN provides increased flexibility and mo- bility for connecting to a network. A properly designed WLAN for a building pro- vides mobile access for a user from virtually any location in the building.
    [Show full text]
  • The Evolution of Wimax – Features and Applications
    International Journal of Emerging Technologies in Engineering Research (IJETER) Volume 4, Issue 5, May (2016) www.ijeter.everscience.org The Evolution of Wimax – Features and Applications Sukhdeep Kaur, Jaipreet Kaur, Manjit Sandhu Assistant professor, Department of Electronics and Communication Engineering, GNDU Regional Campus, Sathiala (Amritsar) Punjab, India. Abstract – Wimax is used for providing broadband using wireless 1. 802.16-2004 is often called 802.16d, since that was medium mainly at 2.5GHz, 3.5GHz and 5.8GHz radio the working party that developed the standard. It is frequencies. It is also known as 4G technology. It delivers about 4 also frequently referred to as "fixed Wimax" since it times fast internet compared to its 3G counterpart. OFDM has no support for mobility. technique has increased the speed as it carries multiple carriers, each carrying more than one data bits based on modulation 2. 802.16e-2005 is an amendment to 802.16-2004 and is techniques (QPSK, 16QAM). The carriers are concisely packed often referred as 802.16e. It introduced support for together to save bandwidth. Intel is behind the development and mobility, amongst other things and is therefore also proliferation of Wimax throughout the world. This paper reviews known as "mobile Wimax". the basic architecture, features, advantages, limitations and some of the applications also. The comparison of Wimax with edge 2. ARCHITECTURE technologies is also discussed. Wimax is a term coined to describe standard, interoperable Index Terms – fixed Wimax, mobile Wimax, IEEE 802.16, implementations of IEEE 802.16 wireless networks. Wimax MIMO, CPE, QoS. architecture is described as: 1.
    [Show full text]
  • Pakedge Introduces Its W5N Wireless Access Point with Dual-Band Radio for Seamless Wi-Fi Roaming in Larger Wireless Networks
    pakedgedevice&software inc. Press Release for Pakedge W5N2 For Immediate Release Date: November 15, 2012 Contact: Nick Phillips, 650-385-8712, [email protected] Frank Doris / Media Relations, 631-645-5668, [email protected] Pakedge Introduces Its W5N2 Wireless Access Point With Dual-Band Radio for Seamless Wi-Fi Roaming In Larger Wireless Networks Foster City, CA – Pakedge Device & Software today announced the introduction of its W5N2 Wireless Access Point With Dual-Band Radio, which incorporates the company’s exclusive Residential Virtual Cell Technology to enable multiple wireless access points in a large network to function as a single “virtual” wireless access point (WAP). This enables seamless Wi-Fi roaming without handoffs for any Wi-Fi device, whether a laptop, touch panel, iPad®, touch VoIP Wi-Fi phone or other portable device. Here’s how non-virtualized or traditional Wi-Fi works: wireless networks that cover a large area require multiple WAPs to achieve adequate coverage. However, when a person moves from the coverage area of one WAP to another, there is typically an interruption in service as one WAP "hands off" to another. The result is an interrupted video stream, phone call or data stream, or lost commands from a touch panel. In contrast to traditional Wi-Fi, the Pakedge W5N2 and its companion CTL-W5N Wireless Virtualization Management Controller provide an extremely reliable Wi-Fi roaming solution. The W5N2 and CTL-W5N use Residential Virtual Cell Technology to link the operation of all the wireless access points in a network together so that they all appear as a single wireless access point to a device (client), even though many wireless access points are installed.
    [Show full text]
  • Ethernet (IEEE 802.3)
    Computer Networking MAC Addresses, Ethernet & Wi-Fi Lecturers: Antonio Carzaniga Silvia Santini Assistants: Ali Fattaholmanan Theodore Jepsen USI Lugano, December 7, 2018 Changelog ▪ V1: December 7, 2018 ▪ V2: March 1, 2017 ▪ Changes to the «tentative schedule» of the lecture 2 Last time, on December 5, 2018… 3 What about today? ▪Link-layer addresses ▪Ethernet (IEEE 802.3) ▪Wi-Fi (IEEE 802.11) 4 Link-layer addresses 5 Image source: https://divansm.co/letter-to-santa-north-pole-address/letter-to-santa-north-pole-address-fresh-day-18-santa-s-letters/ Network adapters (aka: Network interfaces) ▪A network adapter is a piece of hardware that connects a computer to a network ▪Hosts often have multiple network adapters ▪ Type ipconfig /all on a command window to see your computer’s adapters 6 Image source: [Kurose 2013 Network adapters: Examples “A 1990s Ethernet network interface controller that connects to the motherboard via the now-obsolete ISA bus. This combination card features both a BNC connector (left) for use in (now obsolete) 10BASE2 networks and an 8P8C connector (right) for use in 10BASE-T networks.” https://en.wikipedia.org/wiki/Network_interface_controller TL-WN851ND - WLAN PCI card 802.11n/g/b 300Mbps - TP-Link https://tinyurl.com/yamo62z9 7 Network adapters: Addresses ▪Each adapter has an own link-layer address ▪ Usually burned into ROM ▪Hosts with multiple adapters have thus multiple link- layer addresses ▪A link-layer address is often referred to also as physical address, LAN address or, more commonly, MAC address 8 Format of a MAC address ▪There exist different MAC address formats, the one we consider here is the EUI-48, used in Ethernet and Wi-Fi ▪6 bytes, thus 248 possible addresses ▪ i.e., 281’474’976’710’656 ▪ i.e., 281* 1012 (trillions) Image source: By Inductiveload, modified/corrected by Kju - SVG drawing based on PNG uploaded by User:Vtraveller.
    [Show full text]
  • Enabling Carrier® Infinity® Networks in Large Applications Rev
    Enabling Carrier® Infinity® Networks in Large Applications rev. 20140418 rwp Wireless Access Point Range Extension Applications and locations that require a large number of Carrier® Infinity® systems in a large physical space may benefit from repeaters or Wi-Fi® range extenders to provide or improve wireless coverage across the entire space. This general guideline is designed to help extend the range of coverage of the Infinity® wireless network for locations and applications that cover more than 50-80 feet (15-25 meters) of lateral distance between the Infinity wireless access point (WAP) and any of the wall controls to be connected to that access point. Extended coverage is accomplished using Wi-Fi range extenders, also known as bridges or repeaters. This information may be useful if you are having trouble with signal strength due to obstructions between the WAP and a wall control. A repeater may be placed in a way that allows the wireless signal to be directed around an obstruction. See the figure, below. 1 Copyright © United Technologies Corporation 2014 | Carrier is part of UTC Building & Industrial Systems All trademarks are the property of the respective trademark owners. Enabling Carrier® Infinity® Networks in Large Applications rev. 20140418 rwp Range Extending Options There are a number of Wi-Fi® range extenders on the market. We have tried several of these devices to assess their interoperability with Infinity systems. These assessments are not extensive nor exhaustive, and Carrier Corporation makes no claims as to the suitability
    [Show full text]
  • Public Wireless Access Security Assessment Tool
    WiFiCue: Public Wireless Access Security Assessment Tool GIAC (GCIA) Gold Certification and RES 5500 Author: Jonathan K Adams, [email protected] Advisor: Sally Vandeven Accepted: September 30th 2019 Abstract Public wireless access points are commonly provided by governments, businesses, schools and other organizations and provide access to the Internet for numerous use cases and can present varying degrees of risk to users. While there are steps that can be taken to mitigate public Wi-Fi risks, ranging from avoidance to the application of end-to-end encryption, application specific encryption, and other technologies and tools, these options are not always viable. This paper examines risks associated with Wi-Fi from on a network-by-network perspective. Recommender Systems are presented as part of a proposed mechanism for informing users of the risks of connecting to a specific access point. Implementing prototype architecture for this purpose is examined. WiFiCue: Public Wireless Access Security Assessment Tool 2 1. Introduction Public wireless access points present an untrusted computing environment for users, whether they are witting of the threat or not. One of the remedies often suggested is to utilize a Virtual Private Network [VPN]. On some wireless networks, VPNs may be disallowed. Even if allowed, Virtual Private Networks vary greatly in their security, and depending upon the vendor, may introduce additional risks and reasons for concern. Additionally, depending upon the application to be used, VPNs can inject network latency that makes some uses suffer, resulting in a poor user experience. Some key factors in assessing the security of a public wireless network are what version of 802.11 is implemented, whether the wireless access point provides the option for encryption, and if so, what the level of encryption is and what mechanism is used for key exchange.
    [Show full text]
  • Wireless Security: an Overview
    Communications of the Association for Information Systems (Volume 9, 2002) 269-282 269 WIRELESS SECURITY: AN OVERVIEW Robert J. Boncella Washburn University [email protected] ABSTRACT The physical transport methods used in wireless communication differ from wired communication. These differences affect how a secure channel can be established in a wireless environment. The purpose of this tutorial is to provide an overview of how a secure channel is set up in a wireless environment that uses the 802.11 or WAP standards. KEYWORDS: WLAN Security, WTLS, WAP, WEP, 802.11b I. INTRODUCTION Wireless and mobile networks are rapidly extending their capabilities. In addition to their increasing bandwidth and because of their flexibility and freedom they are becoming the communication infrastructure of choice. Wireless communication provides a user the capability of conducting commerce at anytime, with nearly anyone, from anywhere, using a mobile communication channel. This mobile communication channel can also be used as an access method to the Internet. As wireless communication and the Internet become truly interoperable, users will want this communication channel to be secure and available when needed. For a message sent using this communication channel, the user expects assurance of: • authentication (the sender and receiver are who they say they are); • confidentiality (the message cannot be understood except by the receiver); and • integrity (the message was not altered). The goal of this tutorial is to provide an overview of what is required to provide a secure communication channel in a wireless environment. The focus is on the security techniques available for Wireless Local Area Networks (WLAN) and for wireless devices (e.g.
    [Show full text]
  • Quickspecs HP V10ag Wireless Access Point Overview
    RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models. QuickSpecs HP V10ag Wireless Access Point Overview Models HP V10ag Wireless Access Point (NA) J9140A HP V10ag Wireless Access Point (WW) J9141A Key features Wireless AP with IEEE 802.11a/b/g support Powerable by PoE or AC Secure connectivity, dual radio, up to eight SSIDs Industry-leading warranty Product overview The HP V10ag Wireless Access Point is ideal for small business networks that need to deploy wireless connectivity quickly and easily with minimal investment. The HP V10ag Wireless Access Point can be configured in just minutes using the intuitive Web-managed interface. The HP V10ag Wireless Access Point also supports IEEE 802.11a, 802.11b, and 802.11g clients simultaneously via its dual IEEE 802.11a and 802.11b/g radios. The Wireless Access Point 10ag can be wall mounted or placed on a flat surface and has the option to be powered by Power over Ethernet (PoE), allowing for increased location flexibility. DA - 12915 Worldwide — Version 5 — November 12, 2010 Page 1 RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models. QuickSpecs HP V10ag Wireless Access Point Overview Features and Benefits Connectivity Simultaneous IEEE 802.11a
    [Show full text]
  • Wireless Network Access Point User Manual
    Wireless Network Access Point User Manual F5D6130 Table of Contents Introduction . 1–2 Product Specifications . 3 Knowing your Belkin Wireless Access Point . 4–5 Quick Setup . 6–7 Installation . 8–10 Installing the Wireless Access Point Manager Software . 11–12 Using the Belkin Wireless Access Point Manager . 13–21 Wireless Networking Using 802.11b . 22–25 Glossary of Wireless Networking Terms . 26–27 Glossary of Wired Networking Terms . 28–29 Troubleshooting . 30 Notes . 31 Information . 32–33 Introduction Thank you for purchasing the Belkin 11Mbps Wireless Access Point (WAP) and welcome to the world of wireless networking. Now you can take advantage of this great new technology and gain the freedom you need around the home or office without using cables. The WAP acts as a bridge between your existing wired network and your wireless equipped computers. The easy installation and setup will have you networking wirelessly in minutes. Please be sure to read through this manual completely to be sure that you are getting the most out of your WAP. Key Features Wide Area Coverage at High Speeds The Belkin WAP provides coverage over an indoor area up to 300 feet in radius and an outdoor area over 1,800 feet in radius. Up to 128-bit Security Encryption Your Belkin WAP is capable of encrypting (scrambling) the transmitted radio waves so you can be sure that your data is secure. The optional encryption feature allows you to encrypt at 64-bits or 128-bits using a key that you enter yourself. MAC Address Filtering For added security, you can set up a list of MAC addresses (unique client identifiers) that are allowed access to your wireless network.
    [Show full text]