Carlson Simplicity Works with AutoCAD®, IntelliCAD® & MicroStation® A Windows-based coordinate geometry program, Simplicity Sight Survey provides simplified methods for solving common coordinate Sight geometry and construction surveying problems. Be guided from be- ginning to end with screen prompts moving users seamlessly through routines with all entries checked for possible errors. Survey Get the Ease of Simplicity Combined with the Power of Carlson Familiar commands work within Simplicity as they do within Carl- son Survey: ■ Field-to-Finish ■ Contouring ■ Edit-Process Raw Data ■ Network Least Squares

Versatile - Use with DWF or DGN files  Works on six different versions of MicroStation® V8 (all current versions)  Offers Field-to-Finish routines that are identical whether work- ing in Carlson Survey or MicroStation  Updated to work with current releases of AutoCAD® and IntelliCAD®

Field-To-Finish and Contour output in Microstation V8i

Find Out More NOW! For more info or to locate a dealer near you- call - +31 (0) 36 750 1781 www.carlsonsw.com www.carlsonEMEA.com Markerkant 1338 | 1314 AN Almere | The Netherlands Carlson Simplicity Routines andRoutine Codes CARLSON EMEA|Markerkant 1338|1314 ANAlmere| TheNetherlands |+31(0)36 7501781|www.carlsonsw.com Side Shots(SS) Radial Stake Out(RS) Deflection inverse(DI) Radial Inverse(RI) Slope Inverse(SI) Field DataInverse(FI) Inverse (IN) Lines Menu 2 LinesThroughaPoint Radial Sides Line ThroughaPoint 2 SidesParallel Pre-determined Area (PD) Point toPoint Area (PA) Area Print Out(AR) Area Menu Compare Points Delete Field toFinish (XF) Draw Field toFinish (FF) Grid to Coordinates toLat/Lon toCoordinates Lat/Lon International Feet toUSSurveyFeet International Feet toMeters Meters toInternationalFeet Meters toUSSurveyFeet US SurveyFeet toInternationalFeet US SurveyFeet toMeters Two Points inEachSystemKnown Rotation Point andAngleKnown Coordinate Transformation (CT) Offset (OD) Define Figures (Point Groups)(DF) Edit DefaultDescriptions(AP) Clear Point Stations(CS) Clear Point Names(CN) Clear Coordinates (CC) Copy BlockofPoints (CB) Renumber Points (RP) Blank Point Scan(BP) List Coordinates (PM) Draw AllPoints (DL) Point Plot(PP) Point Manager(PM) Show Current Setup Enter BacksightBearing(EB) Enter BacksightPoint (EP) Go To (GT) Start At(ST) Enter Station(ES) Identify Point (ID) Enter Elevation(EZ) Enter andAssign(EA) Points Menu Exit (SY) Raw File Recorder On/Off(RR) Project File Manager(FM) Delete Job Export Import Page Setup Print Preview Print Save JobAs Save Job(SJ) Open Job(LO) New Job(NJ) File Menu © Copyright2014Carlson Software, Inc.Allrightsreserved. CarlsonSoftware isaregistered trademarkof CarlsonSoftware, Inc.Allotherproductnamesortrademarks belongtotheirrespective holders. Coordinate File ASCII File Coordinate File ASCII Files Query Entity(QE) Show /HidePaper (SP) paper(LP) Locate Elements Trim Edit Drawing Zooms Insert Draw Menu Switch Interface Edit UserToolbar Commands Auto BackupSettings(BU) Point Configuration(PC) Drawing Properties (PR) File Path Configuration(FP) Bearings Format Configuration(FC) Configuration(LC) Local COGO Configuration(KC) CAD Configuration(CM) Slope EntryConfiguration(KS) Text OutputConfiguration(KT) Config Menu Remove Polyline Segment Best Fit Line(BF) Traverse RightofWay (RW) Inverse withStations(IS) Traverse withStations(TS) Traverse withOffsets(TO) Traverse Closure (TC) Traverse (TR) Offset (OS) Measure (Label)anAngle(MA) Hatch orFill Line(LE) Draw Leader Draw Chamfer Draw Fillet Draw Ellipse(EL) Draw Three Point Arc(AC) Draw Parallel Line(DP) Draw Line(LI) Draw Rectangle(DR) Draw Circle(DC) Draw B-Spline(RC) Draw Polyline (PL) Selection Filter (SF) Explode Group Explode Block(XB) Create Block Group intoObject Default ArrowProperties (XA) Default Text Properties (XT) Default LineProperties (XL) Move SelectedtoNewLayer(XY) Extend Line Break Line(BL) Layer Erase Drawing Erase(DX) Zoom toPoint (ZP) Zoom Last(ZL) Zoom Sheet(ZS) Zoom Window (ZW) Zoom All(orExtents)(AZorZE) Demagnify (DM) Magnify (MG) Auto ZoomExtents(AZ) Component Place(CPorPS) Raster Image(IM) Title Block(TB) Text Line(TL) ASCII Text File (TF) Short LineTable (SL) Reset CurveTable (VX) Curve Table (CL) Scale Bar(SB) North Arrow(NA) Write DescriptionFile aLegal (LForLE) Squares Network Least Edit Process RawFiles Data Transfer Surface Tools Menu Spiral CurvefromthePI(SR) Best Fit Curve(BC) Curve Offset(CO) Traverse ArcwithOffsets(AO) Traverse Arc(TA) Non-Tangent fromthePCwithOffsets Tangent from thePIwithOffsets Tangent from thePCwithOffsets Non-Tangent fromthePC Tangent from thePI Tangent from thePC Inscribe Arc(IA) Three Point Curve(TP) Inverse ObtuseCurve(OC) Inverse Curve(IC) Curves Menu 3 Point Resection(RN) Arc Station&Offset(AS) Line Station&Offset(LS) Offset Intersection(OI) Perpendicular Offset(PO) Distance-Distance Intersection(DD) Distance-Bearing Intersection(DB) Distance-Arc Intersection(DA) Bearing-Distance Intersection(BD) Bearing-Bearing Intersection(BB) Bearing-Arc Intersection(BA) Arc-Distance Intersection(AD) Arc-Bearing Intersection(AB) Arc-Arc Intersection(AA) Intersections Menu Measure betweenCADPoints (MD) Select Distance(SD) Select Bearing(SB) Refresh LayerList Edit Layers(EL) Pick Points inCAD Close CAD Open CAD Open DrawinginCAD CAD Menu Plot Drawing Refresh Drawing(RD) Snaps Carlson RawEditor C&G RawEditor SurvCom Transfer C&G Transfer Delete Contours(XC) Calculate Volumes (CV) Edit TIN(ET) Hide Triangles (HT) View Triangles (VT) Contour (CI) Surface Manager(SM)

410-290-3