DOCSLIB.ORG

Line Thermal Printer STAR Line Mode Command Specifications

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Line Thermal Printer STAR Line Mode Command Specifications Line Thermal Printer STAR Line Mode Command Specifications Rev 1.15 Star Micronics Co., Ltd. Special Products Division Table of Contents 1. INTERFACE CONFIGURATION .........................................................................................................................1-1 1.1. RS-232 Serial Interface ..............................................................................................................................1-1 1.1.1. Specifications (Conforming to RS-232) ..............................................................................................1-1 1.1.2. Signal array and explanations according to interface connector pin ..................................................1-1 1.1.3. Communication Protocol ....................................................................................................................1-2 1.2. Parallel Interfaces (Amphenol 36 pins).......................................................................................................1-4 1.2.1. Specifications (Conforming to IEEE1284) ..........................................................................................1-4 1.2.2. Signal array and explanations according to interface connector pin ..................................................1-4 1.2.3. Signal Output Timing ..........................................................................................................................1-5 1.2.4. Status Specification ............................................................................................................................1-5 1.3. USB Interface .............................................................................................................................................1-6 1.4. Ethernet Interface .......................................................................................................................................1-6 1.5. Wireless LAN Interface ...............................................................................................................................1-6 1.6. Powered USB Interface ..............................................................................................................................1-6 2. COMMAND FUNCTION LIST .............................................................................................................................2-1 3. COMMAND DETAILS .........................................................................................................................................3-1 3.1. Explanation of Terms ..................................................................................................................................3-1 3.2. Exception Processing .................................................................................................................................3-2 3.3. Standard Command Details .......................................................................................................................3-3 3.3.1. Font style and Character Set .............................................................................................................3-3 ........................................................................................................................... 3.3.2. Character Expansion Settings ..........................................................................................................3-13 3.3.3. Print Mode .......................................................................................................................................3-17 3.3.4. Line Spacing ....................................................................................................................................3-21 3.3.5. Page Control Commands .................................................................................................................3-24 3.3.6. Horizontal Direction Printing Position ...............................................................................................3-28 3.3.7. Download .........................................................................................................................................3-33 3.3.8. Bit Image Graphics ..........................................................................................................................3-35 3.3.9. Logo .................................................................................................................................................3-39 3.3.10. Bar Code ..........................................................................................................................................3-43 3.3.11. Cutter Control...................................................................................................................................3-45 3.3.12. External Device Drive ......................................................................................................................3-46 3.3.13. Print Settings....................................................................................................................................3-52 3.3.14. Status ...............................................................................................................................................3-54 3.3.15. Kanji characters ...............................................................................................................................3-60 3.3.16. Others ..............................................................................................................................................3-64 3.4. Raster Graphics Command Details ..........................................................................................................3-68 3.5. Black Mark Related Command Details .....................................................................................................3-86 3.6. USB Related Command Details ...............................................................................................................3-90 3.7. 2 Color Printing Command Details ...........................................................................................................3-91 3.8. Presenter Related Command Details .......................................................................................................3-98 3.9. Mark Command Details ..........................................................................................................................3-103 3.10. AUTO LOGO Function Command Details ..............................................................................................3-108 3.11. Two-dimensional Bar Code PDF417 Command Details ......................................................................... 3-117 3.12. Details of the Print Starting Trigger Control Command ...........................................................................3-122 3.13. Two-Dimensional Bar Code QR Code Command Details ......................................................................3-123 3.14. Page Function Command Details ...........................................................................................................3-130 3.15. Reduced Printing Function Command Details ........................................................................................3-132 3.16. Page Mode Command Details................................................................................................................3-133 3.17. Text Search Command Details ...............................................................................................................3-140 3.18. Audio Command Details .........................................................................................................................3-146 3.19. Graphics data Command Details ............................................................................................................3-152 3.20. Individual Logo Commands ....................................................................................................................3-163 3.21. Printer Information Transmission Commands ........................................................................................3-168 ――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――― STAR Line Mode Command Specifications 1 4. CHARACTER CODE TABLES............................................................................................................................4-1 5. APPENDIX .........................................................................................................................................................5-1 5.1. Appendix 1: Bar Code Specification Details ...............................................................................................5-1 5.1.1. Code 39 .............................................................................................................................................5-1 5.1.2. Interleaved 2 of 5 ...............................................................................................................................5-1 5.1.3. JAN/EAN/UPC ...................................................................................................................................5-2 5.1.4. Code 128 ...........................................................................................................................................5-3 5.1.5. Code 93 .............................................................................................................................................5-5
Load more

Recommended publications
  • 7843 Directory Management
    7843 Directory Management Tired of using existing badly written operating systems, Hieu decided to write his new one. Of course, his new operating system will be awesome, bug-free, fast and easy to use. He has finished most of the work, and now he is asking you to do one lasttask: Implement a directory manager. Initially, Hieu’s computer directory is empty. The current directory is the root directory. The directory manager keeps the directory in a rooted-tree structure. In each directory, the children are sorted in lexicographical order. He can do one of the following actions: • MKDIR s: create a child directory named s inside the current directory where s is a string. – If the current directory already contains a child directory named s, print “ERR” and do nothing. – Otherwise, print “OK” • RM s: remove a child directory named s inside the current directory where s is a string. Figure 1 – If there is no child directory named s, print “ERR”. Otherwise, print “OK”. • CD s: change the current directory to a child directory named s where s is a string. – If s is equal to the string “..” and the current directory is the root directory, print “ERR” and do nothing. – If s is equal to the string “..” and the current directory is not the root direc- tory, then you need to change the current directory to the parent directory Figure 2 and print “OK”. – If there is no child directory named s, print “ERR” and do nothing. – If there is a child directory named s then you need to change the current directory to s and print “OK”.
    [Show full text]
  • Print Wizard 3 Manual
    Print Wizard User Guide and Technical Manual Version 3.0 and later Rasmussen Software, Inc. 10240 SW Nimbus Ave., Suite L9, Portland, Oregon 97223 (503) 624-0360 www.anzio.com [email protected] Copyright © 2004-2005 by Rasmussen Software, Inc., All Rights Reserved Rasmussen Software, Inc. Page 1 Print Wizard Manual Table of Contents Table of Contents PRINT WIZARD USER GUIDE.......................................................................................................................................... 7 1 PRINT WIZARD INTRODUCTION ......................................................................................................................................... 7 1.1 What is Print Wizard?............................................................................................................................................... 7 1.2 Concept..................................................................................................................................................................... 7 1.3 Profiles and Services .............................................................................................................................................. 10 1.3.1 Introduction to print profiles................................................................................................................................................11 1.3.2 Introduction to services .......................................................................................................................................................12
    [Show full text]
  • Disk Clone Industrial
    Disk Clone Industrial USER MANUAL Ver. 1.0.0 Updated: 9 June 2020 | Contents | ii Contents Legal Statement............................................................................... 4 Introduction......................................................................................4 Cloning Data.................................................................................................................................... 4 Erasing Confidential Data..................................................................................................................5 Disk Clone Overview.......................................................................6 System Requirements....................................................................................................................... 7 Software Licensing........................................................................................................................... 7 Software Updates............................................................................................................................. 8 Getting Started.................................................................................9 Disk Clone Installation and Distribution.......................................................................................... 12 Launching and initial Configuration..................................................................................................12 Navigating Disk Clone.....................................................................................................................14
    [Show full text]
  • Mac Keyboard Shortcuts Cut, Copy, Paste, and Other Common Shortcuts
    Mac keyboard shortcuts By pressing a combination of keys, you can do things that normally need a mouse, trackpad, or other input device. To use a keyboard shortcut, hold down one or more modifier keys while pressing the last key of the shortcut. For example, to use the shortcut Command-C (copy), hold down Command, press C, then release both keys. Mac menus and keyboards often use symbols for certain keys, including the modifier keys: Command ⌘ Option ⌥ Caps Lock ⇪ Shift ⇧ Control ⌃ Fn If you're using a keyboard made for Windows PCs, use the Alt key instead of Option, and the Windows logo key instead of Command. Some Mac keyboards and shortcuts use special keys in the top row, which include icons for volume, display brightness, and other functions. Press the icon key to perform that function, or combine it with the Fn key to use it as an F1, F2, F3, or other standard function key. To learn more shortcuts, check the menus of the app you're using. Every app can have its own shortcuts, and shortcuts that work in one app may not work in another. Cut, copy, paste, and other common shortcuts Shortcut Description Command-X Cut: Remove the selected item and copy it to the Clipboard. Command-C Copy the selected item to the Clipboard. This also works for files in the Finder. Command-V Paste the contents of the Clipboard into the current document or app. This also works for files in the Finder. Command-Z Undo the previous command. You can then press Command-Shift-Z to Redo, reversing the undo command.
    [Show full text]
  • Powerview Command Reference
    PowerView Command Reference TRACE32 Online Help TRACE32 Directory TRACE32 Index TRACE32 Documents ...................................................................................................................... PowerView User Interface ............................................................................................................ PowerView Command Reference .............................................................................................1 History ...................................................................................................................................... 12 ABORT ...................................................................................................................................... 13 ABORT Abort driver program 13 AREA ........................................................................................................................................ 14 AREA Message windows 14 AREA.CLEAR Clear area 15 AREA.CLOSE Close output file 15 AREA.Create Create or modify message area 16 AREA.Delete Delete message area 17 AREA.List Display a detailed list off all message areas 18 AREA.OPEN Open output file 20 AREA.PIPE Redirect area to stdout 21 AREA.RESet Reset areas 21 AREA.SAVE Save AREA window contents to file 21 AREA.Select Select area 22 AREA.STDERR Redirect area to stderr 23 AREA.STDOUT Redirect area to stdout 23 AREA.view Display message area in AREA window 24 AutoSTOre ..............................................................................................................................
    [Show full text]
  • Command-Line IP Utilities This Document Lists Windows Command-Line Utilities That You Can Use to Obtain TCP/IP Configuration Information and Test IP Connectivity
    Guide to TCP/IP: IPv6 and IPv4, 5th Edition, ISBN 978-13059-4695-8 Command-Line IP Utilities This document lists Windows command-line utilities that you can use to obtain TCP/IP configuration information and test IP connectivity. Command parameters and uses are listed for the following utilities in Tables 1 through 9: ■ Arp ■ Ipconfig ■ Netsh ■ Netstat ■ Pathping ■ Ping ■ Route ■ Tracert ARP The Arp utility reads and manipulates local ARP tables (data link address-to-IP address tables). Syntax arp -s inet_addr eth_addr [if_addr] arp -d inet_addr [if_addr] arp -a [inet_address] [-N if_addr] [-v] Table 1 ARP command parameters and uses Parameter Description -a or -g Displays current entries in the ARP cache. If inet_addr is specified, the IP and data link address of the specified computer appear. If more than one network interface uses ARP, entries for each ARP table appear. inet_addr Specifies an Internet address. -N if_addr Displays the ARP entries for the network interface specified by if_addr. -v Displays the ARP entries in verbose mode. -d Deletes the host specified by inet_addr. -s Adds the host and associates the Internet address inet_addr with the data link address eth_addr. The physical address is given as six hexadecimal bytes separated by hyphens. The entry is permanent. eth_addr Specifies physical address. if_addr If present, this specifies the Internet address of the interface whose address translation table should be modified. If not present, the first applicable interface will be used. Pyles, Carrell, and Tittel 1 Guide to TCP/IP: IPv6 and IPv4, 5th Edition, ISBN 978-13059-4695-8 IPCONFIG The Ipconfig utility displays and modifies IP address configuration information.
    [Show full text]
  • Introduction to Computer Networking
    www.PDHcenter.com PDH Course E175 www.PDHonline.org Introduction to Computer Networking Dale Callahan, Ph.D., P.E. MODULE 7: Fun Experiments 7.1 Introduction This chapter will introduce you to some networking experiments that will help you improve your understanding and concepts of networks. (The experiments assume you are using Windows, but Apple, Unix, and Linux systems will have similar commands.) These experiments can be performed on any computer that has Internet connectivity. The commands can be used from the command line using the command prompt window. The commands that can be used are ping, tracert, netstat, nslookup, ipconfig, route, ARP etc. 7.2 PING PING is a network tool that is used on TCP/IP based networks. It stands for Packet INternet Groper. The idea is to verify if a network host is reachable from the site where the PING command issued. The ping command uses the ICMP to verify if the network connections are intact. When a PING command is issued, a packet of 64 bytes is sent to the destination computer. The packet is composed of 8 bytes of ICMP header and 56 bytes of data. The computer then waits for a reply from the destination computer. The source computer receives a reply if the connection between the two computers is good. Apart from testing the connection, it also gives the round trip time for a packet to return to the source computer and the amount of packet loss [19]. In order to run the PING command, go to Start ! Run and in the box type “cmd”.
    [Show full text]
  • CP/M Commands
    CP/M Commands Built-in commands DIR Lists the names of all files on the currently logged in drive. DIR dr: Lists the names of all files on the specified drive. DIR dr:afn Lists the names of all files satisfying the specified ambignous file name (afn) on the display screen. ERA dr:ufn or ERA dr:afn Erases a specific file or all files that satisfy a specific ambiguous file name from the specified disk device REN dr:ufn1=ufn2 Changes the name of a file which is on the specified drive from ufn2 to ufn1. SAVE n draln Saves the contents of the specified number of pages of the transient program area to a disk device under the speci- fied file name (Each page consists of 256 bytes of memory). TYPE dr:ufn Displays the contents of the specified ASCII file (a file stored in ASCII codes) in the specified disk device. USER n Allows different users to specify their own logical direc- tories on the same disk device. n is the user nurnber (an integer from 0 to 15) which spécifies a logical diretory. Transient commands CONFIG The CONFIG command sets the system environment of the PX-8 and determines various default settings. FILINK The FILINK program transfers files between PX-8 and another computer (such as another PX-8, QX-10, etc.) through the RS-232C communication line. 1 PIP [I] (Ignore null) Activates the PIP commande When specified, PIP ignores null records (00H) and checks to confirm that data transferred is Intel HEX PIP d:=s: afn format.
    [Show full text]
  • Partition-Rescue
    Partition-Rescue Revision History Revision 1 2008-11-24 09:27:50 Revised by: jdd mainly title change in the wiki Partition-Rescue Table of Contents 1. Revision History..............................................................................................................................................1 2. Beginning.........................................................................................................................................................2 2.1. What's in...........................................................................................................................................2 2.2. What to do right now?.......................................................................................................................2 2.3. Legal stuff.........................................................................................................................................2 2.4. What do I need to know right now?..................................................................................................3 3. Technical info..................................................................................................................................................4 3.1. Disks.................................................................................................................................................4 3.2. Partitions...........................................................................................................................................4 3.3. Why is
    [Show full text]
  • Partition.Pdf
    Linux Partition HOWTO Anthony Lissot Revision History Revision 3.5 26 Dec 2005 reorganized document page ordering. added page on setting up swap space. added page of partition labels. updated max swap size values in section 4. added instructions on making ext2/3 file systems. broken links identified by Richard Calmbach are fixed. created an XML version. Revision 3.4.4 08 March 2004 synchronized SGML version with HTML version. Updated lilo placement and swap size discussion. Revision 3.3 04 April 2003 synchronized SGML and HTML versions Revision 3.3 10 July 2001 Corrected Section 6, calculation of cylinder numbers Revision 3.2 1 September 2000 Dan Scott provides sgml conversion 2 Oct. 2000. Rewrote Introduction. Rewrote discussion on device names in Logical Devices. Reorganized Partition Types. Edited Partition Requirements. Added Recovering a deleted partition table. Revision 3.1 12 June 2000 Corrected swap size limitation in Partition Requirements, updated various links in Introduction, added submitted example in How to Partition with fdisk, added file system discussion in Partition Requirements. Revision 3.0 1 May 2000 First revision by Anthony Lissot based on Linux Partition HOWTO by Kristian Koehntopp. Revision 2.4 3 November 1997 Last revision by Kristian Koehntopp. This Linux Mini−HOWTO teaches you how to plan and create partitions on IDE and SCSI hard drives. It discusses partitioning terminology and considers size and location issues. Use of the fdisk partitioning utility for creating and recovering of partition tables is covered. The most recent version of this document is here. The Turkish translation is here. Linux Partition HOWTO Table of Contents 1.
    [Show full text]
  • Chapter 8: Disks and Filesystems
    8 D I S K S A N D F I L ESYSTEMS Oh, my head hurts bad. Rings of ones and zeros, ouch! Filesystems hide them. Proper data management is perhaps a sys- tems administrator’s most vital duty. You can replace almost every computer compo- nent, but the data on your disk is irreplace- able. Perhaps that data isn’t important or it’s backed up, but losing files will ruin your day. As a sysadmin, you must protect important data by carefully manag- ing your disks and filesystems. We covered the basics of disklabels and MBR partitions in Chapter 2, but OpenBSD lets you use and abuse disks and filesystems in any number of ways. You’ll learn how in this chapter. !"#$%&'()*+(,-./0)1,2)(23'3$,) 415670)839:;(%)<=)>&9;# Device Nodes A device node is a file that provides a logical interface to a piece of hardware. By reading from a device node, sending data to it, or using a command on it, you’re telling the operating system to perform an action on a piece of hardware or, in some cases, a logical device. Different devices behave differently when data is sent to them. For example, writing to the console makes text appear on the screen or termi- nal, while writing to a disk device puts data on that disk. (OpenBSD puts device nodes in /dev and disallows device nodes on other filesystems.) Many disk management programs expect to be given a device name as an argument. Unfortunately, device node names are frequently cryptic and vary widely among operating systems—even on closely related operat- ing systems that run on the same hardware.
    [Show full text]
  • Fiery Command Workstation © 2017 Electronics for Imaging, Inc
    Fiery Command WorkStation © 2017 Electronics For Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 20 June 2017 Fiery Command WorkStation 3 Contents Contents Overview ...................................................................................11 Fiery Command WorkStation .....................................................................11 The Command WorkStation workspace ...........................................................12 Job Center ...................................................................................12 Device Center ................................................................................15 Adding and connecting a Fiery server .....................................................16 Access levels ...................................................................................16 Connecting to a Fiery server ......................................................................16 Add and connect to a Fiery server ................................................................16 Log off the Fiery server ........................................................................17 View another Fiery server ......................................................................17 The Servers list ...............................................................................17 Customizing Command WorkStation ......................................................20 Set Command WorkStation preferences .............................................................20
    [Show full text]