Printer controller command summary Copy Virtual Printer (A), (O) Install Feature License Print Billing Report (A), (O) Creates a new virtual printer by copying the attributes of an existing (A) Prints a billing meters report. Not available for the DC 2060. virtual printer. Installs Feature License using command line parameters. These commands are available to you in the DocuPrint Print Service Print CDROM Font List (A) window at the indicated levels as follows: User (U), Operator (O), and Create Profile ... (A) Install FlexLicense from Floppy (A) Prints CDROM font list. Creates the profile for the optional output device (or input Installs Flex License from floppy. Administrator (A). Print Color Calibration Target devices for models 96, 4635, or 180). Backup Site Files (A) Install Fonts From CDROM (A) (A) Stores a copy of files customized for your local site on diskette or Create Virtual Printer (A), (O) Allows you to install PostScript fonts from a CD-ROM. Prints one or more color calibration targets of the selected type to the Allows you to create a virtual printer. default media; targets are scanned to create calibration. tape. Install Fonts From Floppy (A) Backup Virtual Printers List (A) Delete Accounting (A) Allows you to install PostScript fonts from a series of diskettes. Print Documents from CDROM Deletes accounting log files (A) Stores list of virtual printers on diskette or tape. Install License (A) Submits a print job for the document or documents in the specified Delete Color Calibration (A) No longer used. Backup Xerox Files (A) file or files stored on the CDROM, using the specified job attributes. Deletes a specified color calibration. Stores a copy of Xerox files on diskette or tape. Install PCLFonts From Floppy (A) Print Documents from Floppy Delete Fonts (A) Allows you to install PCL fonts from a series of diskettes. Broadcast message to all execs (A) (A) Allows you to delete fonts installed on the printer controller. Sends message to all executives logged on locally and remotely. Install Remote Update (A) Prints PostScript, PCL 5, or ASCII files from a DOS-formatted Cancel Documents (A), (O) Delete Forms (A) Allows you to install an update that has been stored, from a remote diskette. Allows you to delete forms installed on the printer controller location. Cancels printing of specified documents. Print Font List (A), (O) Change Administrator Password (A) Delete Input|Output Profile (A) Install Update From CDROM (A) Prints a list of fonts installed on the printer controller. Deletes the specified input or output profile. Allows you to install a software upgrade from CDROM. Allows you to create or change the password you use to Print Font Sample access the Administrator level of commands. Delete IPDS Trace File (A) Install Update From Floppy (A) (A), (O) Change Document Attributes (A), (O) Deletes the trace files whose names match Allows you to install a software upgrade from a series of Prints a sample of the PostScript font you specify. the specified pattern diskettes. Allows you to change the attributes of specified documents. Print Form List (A), (O) Change Imager Parameters (A) Delete Logs (A) List CDROM Fonts (A) Prints a list of forms stored on the printer controller. Deletes the contents of one or all of the logs in the system Lists the fonts on a CD in the CD-ROM drive. Allows you to change the current values of the imager Print Form Sample (A), (O) directory. parameters for PostScript and IPDS jobs. The system prompts you List Color Calibrations (A) Prints a copy of the specified form(s). for the lineThicken, fontThicken, tint, sampleBlackSnap, Delete Virtual Printer (A), (O) Displays all color calibrations whose name matches the specified Print Log (A), (O) and fatScanConversion values. Allows you to delete a virtual printer. pattern. Prints one of the logs in the system directory. Change Operator Password (A) Disable Modem (A) List Documents Print Options (A) Allows you to create or change the password you use to Disables modem. (A), (O), (U) Prints a copy of the local printing options. access the Operator level of commands. Lists documents that have the specified status or attribute. Disable Remote Shell (A) Lists all pending documents if no arguments are provided. Print PCLFont Sample Change PCL Imager Parameters (A) Disables access to UNIX shell during a remote service session. (A), (O) Allows you to change the current values of the imager List Executives (A), (O) Display Billing Meters (A), (O) Prints PCL font sample. parameters for PCL only. The system prompts you Lists current local and remote print service sessions. Displays Billing Meter A if no argument is entered with the for the values. Print Sample Document command. Displays all Billing Meters if “all” is entered with List Files on CDROM (A) (A), (O) Change PCL Parameters the command. Not available for DC 2060. Lists files on the CDROM in the CDROM drive whose names match Prints the specified sample document. (A) the specified pattern. Dump Accounting (A) Allows you to change parameters for PCL printing. Print Virtual Printers List (A) Copies all print job data to the system directory List Floppy Fonts (A) Prints a list of all or selected virtual printers and their attributes. Change Virtual Printer (A), (O) (/var/log/docuprint_accounting) and purges it from the Job Lists the fonts on a diskette in the diskette drive. Allows you to assign or change the default attributes of a Pool Manager database. Privilege (A), (O), (U) List Fonts (A), (O), (U) virtual printer. Changes the access level of commands for User, Operator, Eject CDROM (A) Lists the fonts installed on the printer controller. and Administrator. The Operator and Administrator Configure (A) Ejects a CDROM from the CDROM drive. Allows you to configure the DocuPrint NPS printer controller. List Forms (A), (O), (U) commands may require a password. Eject Floppy (A) List the forms installed on the printer controller. Promote Document (A), (O) Copy Accounting To Floppy (A) Ejects a diskette from the diskette drive. Allows you to copy accounting data to a diskette. You must List IPDS Trace Files (A) Allows you to promote a document to be printed before all enter the Dump Accounting command before you use this Enable Modem (A) Lists all available trace files. others in the job pool. Enables modem. command. List Logs (A), (O) Quit Connection (A), (O), (U) Copy Documents to DOS Floppy (A) Enable Remote Shell (A) Lists the size and last update of the logs in the system Allows you to log off a remote session. Entered at the client Copies the specified documents to a DOS-formatted floppy disk in Enable access to UNIX shell during a remote service session. directory. when logged on as a remote operator. zip format. Examine Document (A) List Options (A) Release Documents (A), (O) Copy Documents to Disk (A) Allows viewing of the PDL code of the specified number. (Does not Lists current and valid settings for all available printing Releases documents in the job pool that have specified Copies documents to the disk directory /var/tmp in zip format. show binary data.) options. document ID numbers or attributes. Copy Documents to Floppy (A) Format Floppy (A) List Sample Documents (A), (O), (U) Rename Color Calibration (A), (O) Allows you to copy documents to a diskette for evaluation. Formats a diskette in the diskette drive. Lists sample documents that can be printed using the Print Sample Renames a color calibration file. Documents command. (Documents cannot be printed with the Print Documents from Floppy Forward Document (A), (O) List Virtual Printers (A), (O), (U) Resets the starting point for new job identifiers to the lowest available Copy Documents to Tape (A) Transfers pending, held, or ineligible documents from one Lists all currently defined virtual printers. number. DocuPrint to another DocuPrint with the same version of Copies documents to tape in bar format. List Volumes (A), (O) Restart IPDS Parser (A), (O) software (not used for XDOD clients or IPDS jobs). Copy Logs To Floppy (A) Lists the amount of disk space available for each partition of Restarts the IPDS parser so that new option settings can take effect. Halt System (A), (O) the disk. Allows you to copy one or all of the logs from the system log Restart Sequencer (A), (O) Halts the system. directories to a diskette. PQA (A), (O) Restarts the system Sequencer. Hold Documents (A), (O) Runs a manual Print Quality Adjustment on a DocuPrint Restart System (A), (O) Holds specified documents in the job pool. Model 4850, 4890, or 92C NPS. Reboots the operating system and controller. Restore Default Imager Parameters (A) Set Tray Tray (A), (O) Stop IPDS Tracing (A) Resets the imager parameters to the default values. Sets Tray to the same media specifications as Tray . Stops tracing for IPDS jobs, showing the most recent output file name. Restore Default PCL Imager Parameters (A) Set Tray From Virtual Printer Media (A), (O) Resets the PCL imager parameters to the default values. Matches the media list for the specified virtual printer against paper Stop Virtual Printer (A), (O) Xerox DocuPrint NPS/IPS sizes in trays, then prompts the user to assign the needed media to Allows you to stop a virtual printer. Restore Default PCL Parameters (A) specific trays using Set Tray. Restores default PCL parameters. Unset Stacker (A), (O) Set Virtual Printer Flags (A) (O) Removes stacker from use. Available for systems with two Restore IPDS Input Groups (A), (O) Sets ExportToAppletalk flag of virtual printer. stackers plus top tray. Reads a floppy created in IPS 7.2 and creates virtual printers for the input groups. Show Default Color Calibration (A) Unset Tray (A), (O) Printer Controller Commands Displays the default color calibration. Removes media information from the specified tray. Restore Site Files (A) Restores site files from the diskette or tape you created Show Default Media (A), (O), (U) Wizard Mode (A) Quick Reference Card using the Backup Site Files command. Lists the default media for the printer. Provides access to a UNIX shell. Enter exit to return to the Administrator level of commands. Restore Virtual Printers List (A) Show Document Attributes (A), (O), (U) Refer to this card for quick reference when using the Xerox Restores virtual printer list from the diskette or tape you created using Lists the attribute values of the specified document. DocuPrint NPS/IPS printer controller command line Backup Virtual Printers List. Show HostID (A) interface or telnet remote access. Restore Xerox Files (A) Shows the host ID in hex for licensing. Restores Xerox files from the diskette or tape you created This reference card supplements the Xerox DocuPrint NPS/ Show Imager Parameters (A) using the Backup Xerox Files command. Allows you to display the current imager parameter values. IPS Guide to Managing Print Jobs and Guide to Configuring Set Channel Online | Offline (A) (O) Show Profile (A) and Managing the System and should not be considered a Switches the IPDS channel between the online and offline states. Lists profiles set for optional input or output device (input replacement for other DocuPrint NPS/IPS documentation. Set ColorTRC (A) Show IPDS Status (A), (O) Corrects an existing calibration for printer color drift. Replaces your DocuPrint NPS/IPS printer controller software. Shows status information for IPDS, including whether the IPDS the TRC specified with another TRC. channel is online or offline, and the current IPDS virtual printer. Set Default Color Calibration (A) Show IPDS Tracing (A) Makes the specified color calibration the default. Shows whether IPDS tracing is on or off, and the name of the current Set Default Media (A), (O) or most recent trace output file. Sets the default media for the printer. Accessing printer controller Show IPDS Virtual Printer (A), (O) Set Default Virtual Printer (A), (O) Shows the virtual printer in use for IPDS jobs. IPDS uses the media list commands Sets the system default virtual printer. for this virtual printer. Set Profile (A) Show License Status (A) You use the DocuPrint Print Service window to enter the commands Sets the profile for the optional input or output device after Displays license status of software. that allow you to control most functions of the printer controller. You can creating it (input device available for 96, 4635, or 180 NPS only). also enter many of the commands using telnet remote access. Show Log (A), (O) Set IPDS Virtual Printer (A), (O) Displays all or part of the log specified. There are four levels of printer controller commands: User, Operator, Sets the virtual printer to which to submit IPDS jobs. IPDS uses the Administrator, and Service. Operator and Administrator commands Show Option (A) media list for this virtual printer. Restarts the IPDS Parser and makes may require a password. Displays the current setting for the specified option. sure that the specified virtual printer is enabled. To access the Operator or Administrator commands, enter privilege Show PCL Imager Parameters (A) Set Option (A) at the PS> prompt. Then enter the Allows you to display the current values of the parameters. Sets the specified option to the indicated value. password if required. Show PCL Parameters (A) Set Option Help (A) You can enter ? at the command prompt to display all available User, Displays PCL parameters. Displays a list of the available printing options and a description of Operator, or Administrator commands. each option. Show Scheduling Policy (A), (O) You do not need to enter commands in full, only enter enough to Displays the site scheduling policy specified with the Set Set Scheduling Policy (A), (O) distinguish them from the other commands. For example, you can Scheduling Policy command. Sets the policy by which the system determines the next job to print. enter li doc for the List Documents Command. Show Status (A), (O), (U) Set Stacker To Group (A) You can abort most commands by pressing . Displays the status of the printer. Adds the specified stacker to the specified group. Before you leave the system unattended, return to the User level of Show Time (A), (O), (U) Set Status Message (A), (O), (U) commands by entering privilege user at the prompt. Displays the time. Allows you to set a message that will display when the Show Status command is entered. Start (A), (O) Starts printing, queueing, or both. Set Time
