DOCSLIB.ORG

Color Chart Mirrored (Color & Clear)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Color Chart Mirrored (Color & Clear) Transparent Fluorescent Delvie’s Plastics Translucent ColorFrost Plastiblurs Color Chart Mirrored (Color & Clear) Ideal for Laser Ideal for Laser Transparent Vibrant Colors Cell-Cast Sheet Cutting & Engraving Translucent Sign-Grade Cell-Cast Sheet Cutting & Engraving Material Transparent Acrylic sheet Translucent Acrylic sheet is sheeting that is colored is sheet that is colored but but is easily seen through; is not seen through but 2423 Red 2424 Blue 2069 Blue 2422 Amber i.e. 2423 Red will look like 2283 Red 2119 Orange 2037 Yellow 2050 Blue allows light transmission; red tinted glass. i.e. 2283 Red will have a red glow (when lit) but Transparent acrylic sheet you will not be able to see is a great fit for any objects on other side of 2208 Yellow 2074 Dk Grey 2064 Lt Grey 2412 Lt Bronze application that requires 2146 Ivory 2025 Black 2447 White 3199 Pink sheet. color sheet that is still able to maintain sight lines. Translucent Acrylic is sometimes referred to as 2370 Dk Bronze 1020 Purple 1450 Pink 2120 Teal 2051 Blue 2108 Green 2308 Turquoise 2287 Violet “Sign Grade” material as it *1020, 1450, and 2120 are Extruded Acrylic Sheet is typically used for back lighting applications. 7328 White Ideal for Laser Light Diffusing Ideal for Laser Fluorescent Edges Glow Cell-Cast Sheet Cutting & Engraving Color Frost Frost Cell-Cast Sheet Cutting & Engraving Fluorescent Acrylic sheet The Color Frost acrylic is a speciality sheet that is sheets are specialized soft colored like Transparent hue colors that feature P95 2154 Green 2085 Red 2086 Orange 9092 Blue Acrylic, but have edges Carribean Cherry Blossom Citrus Daffodil frost on one side and that glow. The sheet standard gloss finish on transmits lighting (whether the other side of the sheet. sunlight or room light) to These are unique colors create a edge glowing that allow for flexibility 9097 Yellow effect. This sheeting is a Glacier Kiwi Passion Fruit Poppy when it comes to color favorite among laser offering and functionality cutting& engraving shops with lighting applications. Storm Grey Wedgewood Wisteria Identical to glass mirror Extruded Acrylic Sheet Ideal for large Light Diffusing Ideal for Laser Color & Clear Mirror coverage areas Plastiblurs Frost Cell-Cast Sheet Cutting & Engraving Mirrored Acrylic sheet is The Plastiblurs are highly manufactured to be specialized Cell Cast identical in appearance to Acrylic sheet colors that Blue Mirror Green Mirror Yellow Mirror Red Mirror regular glass mirror. Soft Red Soft Blue Soft Lime Green Soft Green have pastel hued Mirrored Acrylic has the appearances and have advantage of far less frost on both sides of the weight than glass mirror, sheet. Plastiblurs are the making it ideal for large Soft Fuchsia Soft Yellow perfect option for unique Gold Mirror Bronze Mirror Purple Mirror Clear Mirror coverage areas and any colors with the advantage application a very unique of double sided frost type of sheet is required. (PP95) Stock Sheet Sizes: 1/16”* 1/8” 3/16” 1/4” 3/8”* 1/2”* 12” x 12” 12” x 12” 12” x 12” 12” x 12” 12” x 12” 12” x 12” 12” x 24” 12” x 24” 12” x 24” 12” x 24” 12” x 24” 12” x 24” 24” x 24” 24” x 24” 24” x 24” 24” x 24” 24” x 24” 24” x 24” 24” x 48” 24” x 48” 24” x 48” 24” x 48” 24” x 48” 24” x 48” *Available in select colors only In most cases, we are able to cut any of our Acrylic sheet types to custom sizing. Additional 1.800.533.5843 - www.delviesplastics.com - [email protected] shipping charges and cut fees may apply on Delvie’s Plastics larger sheets and larger cutting jobs. Quick Facts Double Sided Frost Cell-Cast Sheet Ideal for Laser Cutting & Engraving.
Load more

Recommended publications
  • Engraving Blanks Suppliers Uk
    Engraving Blanks Suppliers Uk Pestilential and appointed Herbert never togs his jake! Sacramental Gino acierated declaratively. Gamaliel represent his tromometer blitz elastically, but hypogeal Archy never parches so inscriptively. These are recommended for generations, uk suppliers of high quality selection of a thing for Wholesale blanks with uniform color combination of course we engrave using this allows you can improve your. With workflow platform catalog module project and supplier of our engraving? Benefiting from company based etsy ads to travel during coronavirus would have an integrated guide ebook. The blanks suppliers of blanks wholesale star lighters and. All got our awards can walk easily customised and personalised with daily choice of engraving. Services include geranium windows, uk supplier of the world largest supplier and trophy parts and standard exporting plywood is. Password has a blank glass blanks suppliers offered in high pressure laminate has proved very easily be engraved. Cantania medallic specialty engraving blank glass blanks suppliers. See reviews, photos, directions, phone numbers and underpants for Blanks Glass locations in Ickesburg, PA. It allows you can find blanks blank. Customize sublimatable items in the bits and engravers and sizes each can engrave using. Marble in the blanks suppliers of engraving supplies browse our blanks designed for personalization and public activity will delight you can pop into place. Please verify that my are coming a robot. Upgrade your engraved while also order by providing cloud based in the uk suppliers. Full engraving blank. Our extensive range of unexplored markets. This engraving blank is changing are. Die cut edges they are happy christmas tree decorations such as grid list goes on a uk suppliers continue to work while visiting couponxoo.
    [Show full text]
  • Repoussé Work for Amateurs
    rf Bi oN? ^ ^ iTION av op OCT i 3 f943 2 MAY 8 1933 DEC 3 1938 MAY 6 id i 28 dec j o m? Digitized by the Internet Archive in 2011 with funding from Boston Public Library http://www.archive.org/details/repoussworkforamOOhasl GROUP OF LEAVES. Repousse Work for Amateurs. : REPOUSSE WORK FOR AMATEURS: BEING THE ART OF ORNAMENTING THIN METAL WITH RAISED FIGURES. tfjLd*- 6 By L. L. HASLOPE. ILLUSTRATED. LONDON L. UPCOTT GILL, 170, STRAND, W.C, 1887. PRINTED BY A. BRADLEY, 170, STRAND, LONDON. 3W PREFACE. " JjJjtfN these days, when of making books there is no end," ^*^ and every description of work, whether professional or amateur, has a literature of its own, it is strange that scarcely anything should have been written on the fascinating arts of Chasing and Repousse Work. It is true that a few articles have appeared in various periodicals on the subject, but with scarcely an exception they treated only of Working on Wood, and the directions given were generally crude and imperfect. This is the more surprising when we consider how fashionable Repousse Work has become of late years, both here and in America; indeed, in the latter country, "Do you pound brass ? " is said to be a very common question. I have written the following pages in the hope that they might, in some measure, supply a want, and prove of service to my brother amateurs. It has been hinted to me that some of my chapters are rather "advanced;" in other words, that I have gone farther than amateurs are likely to follow me.
    [Show full text]
  • Download Course Outline for This Program
    Program Outline 434- Jewellery and Metalwork NUNAVUT INUIT LANGUAGES AND CULTURES Jewelry and Metalwork (and all fine arts) PROGRAM REPORT 434 Jewellery and Metalwork Start Term: No Specified End Date End Term: No Specified End Date Program Status: Approved Action Type: N/A Change Type: N/A Discontinued: No Latest Version: Yes Printed: 03/30/2015 1 Program Outline 434- Jewellery and Metalwork Program Details 434 - Jewellery and Metalwork Start Term: No Specified End Date End Term: No Specified End Date Program Details Code 434 Title Jewellery and Metalwork Start Term No Specified End Date End Term No Specified End Date Total Credits Institution Nunavut Faculty Inuit Languages and Cultures Department Jewelry and Metalwork (and all fine arts) General Information Eligible for RPL No Description The Program in Jewellery and Metalwork will enable students to develop their knowledge and skills of jewellery and metalwork production in a professional studio atmosphere. To this end the program stresses high standards of craftship and creativity, all the time encouraging and exposing students to a wide range of materials, techniques and concepts. This program is designed to allow the individual student to specialize in an area of study of particular interest. There is an emphasis on creative thinking and problem-solving throughout the program.The first year of the program provides an environment for the students to acquire the necessary skills that will enable them to translate their ideas into two and three dimensional jewellery and metalwork. This first year includes courses in: Drawing and Design, Inuit Art and Jewellery History, Lapidary and also Business and Communications.
    [Show full text]
  • Material Settings
    APPENDIX B: MATERIAL SETTINGS Fusion Series Suggested Material Settings (CO2) Fusion Series Suggested Material Settings (CO2) Material DPI/Freq. 30 watt 40 watt 50 watt 60 watt 75 watt 120 watt Acrylic Photo Engraving 300 DPI 90s 60p 90s 55p 90s 50p 90s 45p 90s 40p 90s 30p Text/Clipart Engraving 300 DPI 90s 80p 90s 75p 90s 70p 90s 65p 90s 60p 90s 55p Text/Clipart Engraving 600 DPI 90s 75p 90s 70p 90s 65p 90s 60p 90s 55p 90s 50p Cutting 1/8” (3 mm) 100 f 5s 100p 6s 100p 7s 100p 8s 100p 10s 100p 12s 100p Cutting 1/4” (6 mm) 100 f 2s* 100p 3s* 100p 1s 100p 2s 100p 3s 100p 7s 100p Cutting 3/8” (9.5 mm) 100 f 2s* 100p 3s* 100p 1s 100p 3s 100p Cutting 1/2” (13 mm) 100 f 1s 100p Cutting Note: Adjusting the standard focus distance so it is closer to the lens by about .080” (2 mm) will produce better edge quality when cutting 1/4” (3mm) acrylic and thicker. Two passes can be used for cutting thicker materials. There are two types of acrylic: cast is better for engraving (it creates a frosted look when engraved) and extruded acrylic produces a much better flame polished edge. * The Fusion has two sets of Speed control for vector cutting applications. Checking the Speed Comp selection box in the print driver will reduce the speed setting you have selected by one half. Speed Comp is most useful for speeds of 1 to 10. Example: Cut a square at 5% speed.
    [Show full text]
  • Corporate-Govement-Organization
    2010/2011 JWXb[E\9edj[dji FW][i)#/ FW][(* FW][**#*, Optical Crystal Light colored Plaques Lapel pins: Corporate, & Glass Trophies & Frames laser Years of Service, medical, & awards engraved directly into Patriot & Military, Custom Pins the wood FW][i'&#'* FW][(+#(, FW][i*-#*. Executive & Multiple Plate Italian & Corporate Sales Perpetual Plaques American Awards: clocks, pen Trophy Cups sets gavels, coasters mounted & boxes on Wood bases FW][i'+#'- FW][i(-#)' FW][*/ Plaques with 2” medallion insert High Polished Medallion inserts & Subjects: High relief Stainless Steel Bowls, Screened plates Stamped in gold, silver & Wine Coolers & Trays bronze, Embossed litho printed aluminum inserts & Etched enamel brass inserts FW][i'.#'/ FW][i)(#)+ FW][+& Plaques with Cast & Die Struck & Die cast Beer Mugs, Coffee Stamped high relief Solid medals: Corporate, Mugs, wine cooler, frames & trim General Achievement, Military, & Coasters & Government Agencies. FW][i(& FW][i),#). FW][+' Certificate & Pin back drape Golf Trophies Photo plaques ribbons & neck ribbons FW][i(' FW][)/ FW][i+(#+* American Eagle Presentation Boxes The American Eagle Patriot Plaque & Display Stands Patriot Trophy series series FW][(( FW][i*&#*( FW][i++#+, Judicial, Key rings & Key Cast Stone Trophies Government, Chains for engraving for Corporate & & Military or Silk-screening FOR Government LASER 3-Dimensional ENGRAVING Recognition Plaques FW][() FW][*) FW][i+-#+. FW][+/ Clock Plaques & Genuine Pewter Engraving Product Index Contemporary Key Chains Information Plaque Frames & pricing All glass awards are delivered in attractive gift boxes. All items can be laser engraved, and we have given the engraving Area for each item. Engraving charges for text and logos appear separately on the price sheet. @WZ[9ebeh=bWiiJhef^_[i9beYa Please refer to pages 57 & 58 for engraving information and pricing.
    [Show full text]
  • A Review: Effect of Different Laser Types on Material Engraving Process
    Research & Reviews: Journal of Material Sciences e-ISSN: 2321-6212 p-ISSN: 2347-2278 DOI: 10.4172/2321-6212.1000235 A Review: Effect of Different Laser Types on Material Engraving Process Kadhim A Hubeatir1*, Mohanned M AL-Kafaji2 and Hadeel J Omran2 1Department of Laser and Optoelectronics Engineering, University of Technology, Iraq 2Department of Production Engineering and Metallurgy, University of Technology, Iraq Research Article Received: 27/08/2018 ABSTRACT Accepted: 29/10/2018 The laser is a non-traditional device used in many applications Published: 06/11/2018 because it is a versatile flexibility and cost-effective. In this paper, different laser types of engraving different material were discussed for different fundamental researchers on laser engraving. Laser engraving *For Correspondence is very practical to engrave hard and various material by removing part of layer from the surface to a specific depth. The effect of laser Kadhim A Hubeatir, Department of Laser and parameters such as wavelength, pulse duration, repetition-rate and Optoelectronics Engineering, University of mode of operation has studied various types of material. Also, the Technology, Iraq. effect of material properties such as optical and physical properties with respect to incident laser radiation was studied. There are many kinds of Tel: +964 790 144 9044 industrial laser which are used for engraving like, carbon dioxide (CO2) laser, Neodymium-doped Yttrium Aluminum Garnet (Nd: YAG) laser, fiber E-mail: [email protected] laser and others. This review discussed the effect of three types of laser engraving on different material. With a sample comparison explains a Keywords: Laser engraving, Process parameter, summary of each author and the type of laser, material with the result Surface roughness, Engraving depth, Engraving.
    [Show full text]
  • Cremation Jewelry Selections
    & · Exquisite Quality · Lowest Prices · 100% Satisfaction Guaranteed & Amazing Hi-Resolution Impression Cut Deep into Precious Metal. Shown in 3-D. R316L Stainless Steel R 925 Sterling R14K White Gold* R 14K Yellow Gold* RPT950 Platinum* * Allow 4-5 Weeks For Delivery. Honor Your Loved One Forever In Precious Metal Memorial Jewelry · Cremation Jewelry · Photo Jewelry · Fingerprint Jewelry · Footprint Jewelry · Handprint Jewelry · Handwriting Jewelry · Graphic Jewelry · Personalized Jewelry Mother’s Print Father’s Print Cremation Jewelry We Offer 200+ Unique Designs Your Favorite Photo Letter Engraving Your Loved One’s Actual Handwriting Compartment Holds a Pinch of Your Loved One’s Ashes or Dried Flowers From a Available in Funeral Service Single or Double Compartment Holds Small Amount of Ashes Inside Two Fingerprints Handwriting Photo Cremation Jewelry photos are not actual size. 2 1-877-995-8767 | 253-649-0568 | www.NewMemorialsDirect.com | New Memorials Direct is a Bailey & Bailey Family-Owned Company. ©2019 Bailey & Bailey All Rights Reserved. 3 Allow 1 business day lead time for sterling silver & stainless steel, 4-5 weeks for 14K gold & platinum and additional time for large orders. Print Jewelry Photo Jewelry Graphic Jewelry 7 Easy Steps 1 Choose your print or graphic: 5 Choose back options: The possibilities are endless. Here are a few ideas... & Fingerprint Handprint Footprints Photo Custom Writing Symbol Line Drawing Logo (Extra Charge Handwriting for 2nd print) or Signature Front Back Front Back Front Back Front Back Choose your jewelry style: Photo Script Text Babyfeet Inside Script Text Photo Military Emblem 3D Baby Block Text 2 Jewelry photos are smaller than actual size.
    [Show full text]
  • Engraving 41314 Brass, Trophy; 12” X 24” X .020”
    Part Number Description Engraving 41314 Brass, Trophy; 12” x 24” x .020” 41316 Brass, Black Enamel; 12” x 24” x .020” 4160131 Brass Black Enamel Gloss Laserable 12” x 24” x .016” 41314 Part Number Description 415266 Alumamark, Satin Silver, 12” x 20” x .020” *Box of 5 Sheets* 41316 415252 Alumamark, Satin Brass, 12” x 20” x .020” * Box of 5 Sheets* 415285 Alumamark, Mirrored Gold, 12” x 20” x .020” *Box of 5 Sheets* 4105974 DuraBlack, Matte, Aluminum, 12” x 20” x .020” *Box of 5 Sheets* 4131711 415266 Part Number Description Part Number Description 41PLEX14 Plexiglass, Laserable, Clear 24” x 48” x 1/4” 4131711 Combo Shear, 12in, Plastic & Metal 41PLEX18 Plexiglass, Laserable Clear 24” x 48” x 1/8” 4131716 Upper Replacement Blade for Shear Part Number Description 4131733 Lower Replacement Blade for Shear Blank Solid Wood Plaques, Special Sizes, Types, Varies and Edges Available Roman Cove Bevel Radius Cove Rectangle Shield Don’t see what you are looking for..... Contact your Rayco Rep for more information regarding the products in this category!! State TO ORDER Contract Availability call: 1-757-431-0698 FEDMALL email: [email protected] 63 visit our website: RAYCOSUPPLY.COM GSA ADVANTAGE Red/White Red/YellowOrange/White Blue/ White Blue/Yellow Green/White White/Red White/GreenWhite/Black White/Blue Black/White Yellow/Black Black/Yellow Black/Gold Black/Silver Brushed Copper/Black Deep Bronze/Black Brushed Gold/Black European Gold/Black Smooth Gold/Black Brushed Aluminum/Black Brushed Silver/Black Smooth Silver/Black *** Note For All Engraving Sheets *** The SECOND color listed will show once engraved ex: ‘Black/ White’ or ‘Black on White’ will look like a plain black sheet until engraved.
    [Show full text]
  • Laser Processes: Marking, Engraving and Etching
    MAKE YOUR TECHNICAL INNOVATION A COMMERCIAL REALITY LASER PROCESSES: MARKING, ENGRAVING AND ETCHING Identifying the key differences and clarifying your options Talk to us today nexus-ie.co.uk [email protected] Connect With Us @Nexus_IE linkedin.com/company/nexus-ie/ INTRODUCTION The process of using lasers for marking is widely used in manufacturing. The highly efficient, flexible and cost-effective nature of the process allows it to be utilised by various different industry sectors for many different purposes, for example marking serial numbers on components for traceability and for personalised engraving. The process is especially common in automotive, aerospace and the medical device industries, but this is by no means an exclusive list. Schools, hobbyists and small businesses recognise the technique as a viable option to mark and customise their products and parts. For a broad range of materials including metal leather, glass wood etc. The purpose of this eBook is to help you understand the available options, for laser marking providing you with more clarity going forward with your own marking project. LASER MARKING WHAT IS LASER MARKING? There are 4 different types of laser marking each of which essentially use heat to create markings with a smooth finish. Manufacturers in a wide range of industries using various materials opt for laser marking but their individual needs dictate the type of laser marking they use. WHAT MATERIALS CAN BE LASER MARKED? What makes laser marking so flexible is that by using lasers with different wavelengths and processes you can mark a whole range of materials. Wood and glass are the hardest but there are long wavelength lasers that are even able to mark those too.
    [Show full text]
  • Product Focus on Booksbooks
    Cookson BIG Catalogue Product Focus on BooksBooks The widest choice of products, materials & equipment for the jewellery trade, all from one convenient source. ThereThere isis nothing like aa goodgood read...read... particularly if its about a subject which is new to you, or about which, you need to brush up on. Having a good book is important because it gives you the resource to troubleshoot and solve problems, it explains the hows and whys, and it puts you back on track when youve experimented with the tried and true. Learn a new skill or find comprehensive information and technical details that will help you perfect your technique! Jewellery: Fundametals of Handbook of Jewellery Metalsmithing Techniques By Tim McCreight NEW! By Carles Codina NEW! This introduction to basic techniques such as This book shows in step-by-step sequences, piercing, setting and soldering are explained how to accomplish various techniques with colour photographs. Also included are including enamelling, fusing, and soldering. examples of exciting work by a diverse range It also explains the pros and cons of of artists, a helpful glossary and valuable tables. Hardbound, 144 different materials and finishes and how to pages with 250 colour photographs. achieve them. Hardbound, 160 pages. Code No: 999 A19 £25.00 Code No: 999 A20 £20.00 Enamelling on Precious Metals Gemstones By Jeanne Werge-Hartley By Cally Hall NEW! NEW! Topics covered: An introduction to the Packed with detailed information on enamels and precious metals used for gemstone properties, varieties, chief enamelling. Details alternative approaches to characteristics and distinguishing champleve, cloisonne, and plique a jour.
    [Show full text]
  • Material Settings
    APPENDIX B: MATERIAL SETTINGS FiberMark Suggested Material Settings FiberMark Suggested Material Settings Material DPI/Freq. 20 watt 30 watt 50 watt Aluminum (Anodized) Etching/Marking 600 DPI Speed: 30 - 40% Speed: 40 - 50% Speed: 50 - 60% Power: 100% Power: 100% Power: 100% Frequency: 1% Frequency: 1% Frequency: 1% Focus: +.06 to +07 Focus: +.06 to +07 Focus: +.06 to +07 The contrast / brightness of marks achievable on the fiber laser are excellent and can often be much brighter than marks from a C02 laser. Taking the fiber laser out of focus by +.06” - .09” broadens the beam and produces a very bright mark on anodized coating. Lower frequency and higher power settings help offset the change in focal point. Different grades of anodized & core aluminum alloy will affect how the final marks look. Aluminum (Bare) Etching/Marking 600 DPI Speed: 20 - 30% Speed: 30 - 40% Speed: 40 - 50% Power: 100% Power: 100% Power: 100% Frequency: 50 - 60% Frequency: 50 - 60% Frequency: 50 - 60% Focus: -.01 to +.01 Focus: -.01 to +.01 Focus: -.01 to +.01 Engraving aluminum will result in various shades of gray, not black. Fine tuning the settings can provide a bit more contrast but the range of applicable marks is very narrow. If the application calls for a black etch, consider using an oxidizer after engraving. Oxidizers are used most commonly if the aluminum has a protective coating (urethane, clear coat, clear anodized) covering the area that is not engraved. Deep metal engraving on aluminum can be done using multiple passes. Consider deep engraving and using a black epoxy/color fill.
    [Show full text]
  • Directmark Tutorial 6 Marking Processes of Steel
    DirectMark Tutorial 6 Marking processes of steel DirectMark Tutorial 6 for ProMarker Series | V001_DM-Tutorial (06/2015) ENGLISH www.troteclaser.com DirectMark Tutorial 6 Content Content 1 Objectives of this tutorial ................................................................................................................ 3 2 Marking processes for stainless steel and corresponding laser parameters ........................... 4 2.1 Engraving ..................................................................................................................................... 4 2.2 Polishing ....................................................................................................................................... 5 2.3 Annealing...................................................................................................................................... 5 3 Creation of a job in Corel Draw and DirectMark ............................................................................ 6 3.1 Open logo in Corel Draw .............................................................................................................. 6 3.2 Definition of laser parameters in material database ..................................................................... 6 4 Mark the job in steel with different processes .............................................................................. 8 4.1 Set parameters and mark the image with engraving process ...................................................... 8 4.2 Set parameters and mark
    [Show full text]