Ford Flex Problems Complaints
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Second Amended Complaint for Patent Infringement
Case 3:17-cv-03201-N Document 79 Filed 11/17/16 Page 1 of 44 PageID 3978 UNITED STATES DISTRICT COURT EASTERN DISTRICT OF MICHIGAN FORD GLOBAL TECHNOLOGIES, LLC, Case No. 2:15-CV-10394-LJM-SDD Plaintiff, HON. LAURIE J. MICHELSON v. NEW WORLD INTERNATIONAL JURY TRIAL DEMANDED INC., AUTO LIGHTHOUSE PLUS, LLC, and UNITED COMMERCE CENTERS, INC. Defendants. SECOND AMENDED COMPLAINT FOR PATENT INFRINGEMENT Case 3:17-cv-03201-N Document 79 Filed 11/17/16 Page 2 of 44 PageID 3979 Plaintiff Ford Global Technologies, LLC (“FGTL”) by and through their undersigned counsel, as and for its Complaint against defendants United Commerce Centers, Inc., New World International Inc., and Auto Lighthouse Plus, LLC (collectively, “Defendants”) alleges as follows: I. THE PARTIES 1. Ford Global Technologies LLC (hereinafter “FGTL”) is a limited liability company organized and existing under the laws of the State of Michigan, having a principal place of business at 330 Townsend Drive, Suite 800 South, Dearborn, MI 48126. 2. On information and belief, Defendant United Commerce Centers, Inc. (hereinafter “UCC”) is a Texas Corporation, with a principal place of business at 1720 E. State Highway 356, Irving, TX 75060. 3. On information and belief, UCC is doing business as New World International. 4. On information and belief, Peter Tsai is registered agent, president and treasurer of UCC and Grace Tsai is Director, Vice President and Secretary of UCC. 1 Case 3:17-cv-03201-N Document 79 Filed 11/17/16 Page 3 of 44 PageID 3980 5. On information and belief, Defendant New World International Inc. -
Automotive Sensors Commercial Vehicle Sensors Circuit Protection Solutions Automotive Sensors
Automotive Division PRODUCT PROFILE Automotive Sensors Commercial Vehicle Sensors Circuit Protection Solutions Automotive Sensors he Bourns Automotive Division has played a leading role in Tthe design, development and manufacture of potentiometer sensors for over 70 years. At our engineering centers in Riverside/ California, Taufkirchen/Germany and Auburn Hills/Michigan we develop and design a range of customized automotive position, speed and torque sensors. These products are manufactured in Ajka/Hungary, Chihuahua & Tijuana/Mexico and Xiamen/China. Bourns, Inc. is a privately held company with headquarters in Riverside, California. Currently, there are about 5,300 employees located in 14 different Bourns-owned design and manufacturing locations worldwide. Our research and development work combined with close collaboration with customers helps to ensure that our products meet the highest standards set for the automotive industry. Using state-of-the-art development software and world-class production methods, Bourns can provide innovative and cost-effective solutions for your applications. 2 Automotive Division ur phenolic paper, high aluminum oxide ceramics, Othermosetting plastics and specially developed Bourns® resistor inks are designed to withstand the harshest operating conditions within rated limits, with many of our sensors used in rigorous on and off highway applications. Our non-contacting sensors are developed with a wide range of magneto resistance- based angular sensor solutions supplemented by competitive Hall Effect and 2 Axis Hall Effect technology. Bourns can assist in the selection of the most appropriate technology for your specific applications. Bourns TS16949 certified quality system and the Bourns Production System (BPS) help ensure uncompromised quality and maximum reliability. Lean production methods are also used during the design and manufacturing phases of a project. -
Hasfm11 M F As H 11 M
HA-FM11 manualv3_p1-20_Layout 1 15/08/2016 18:40 Page 1 HA+$)0+$ - 280)0 PRO INST$/$500$18$/$ / $//(5ά60$18$/$500$ 18$/ MManufacturer:anufacturer: CCOMMERCIALOMMERCIAL EELECTRONICSLECTRONRONICS CO LLTDT D 226464 HAYDONS RROAD,OAD, WIMBLWIMBLEDON,EDON,DON, LLONDONONDON SSW19W19 88TT.TT. UUKK TTEL:EL: ++4444 002020 84048404 77105105 FFAX:AX:AX: ++4444 002020 88404404 71071044 hhttp://www.hawkcaralarm.comttp://www.hawkcaralarm.com ee-mail:-mail: [email protected]@hawkcaralarm.com ManufacturedManufactured by Commercial Electronics Co Ltd. GreatGreat Britain. © Commercial Electronicsonics 2015.6 HA-FM11 manualv3_p1-20_Layout 1 15/08/2016 19:46 Page 2 HA-FM11 manualv3_p1-20_Layout 1 15/08/2016 18:40 Page 3 HA-FM 11 – Owner’s Guide Congratulations on the purchase of your state of the art vehicle security system. This system has been designed to provide years of trouble-free operation. HA-FM 11 is a reliable car alarm system, which provides 2 designs to prevent the car thieving. The first design is to use the loud siren. When any illegal intrusion happens, the siren will sound loudly to warn the intruder. The second design is to use an immobilisation system to disable the engine start. With the peripheral devices, the system can provide the following main protection: • Ignition trigger: illegally turn IGNITION ON, the alarm will be triggered. • Boot trigger: illegally open the boot, the alarm will be triggered. • Door trigger: illegally open the door, the alarm will be triggered. • AUX trigger: it can be used on any other additional sensor, e.g. bonnet trigger. Illegally open the bonnet, the alarm will be triggered. -
Car Lock Sound Notification
Car Lock Sound Notification Which Paul misallege so acquiescingly that Inigo salts her blitz? Fleshless and interfascicular Warden crowns almost civically, though Reg disinterest his pepo classicizing. Innovatory Angelico devocalises meaningfully. Is very loud pipes wakes people that are only the car horn wakes up indicating the following section that car lock mode on the individual responsibility users only CarLock Alerts YOU Not an Whole Neighborhood If Your. Listen to review this feature you can have a false alarms that same time for amazon prime members can change often. Tell us in your hands full functionality varies by more broken wires i am happy chinese new account in order online. I usually don't like my life making sounds but I find your lock confirmation. Remain running through an automatic. Anti-Theft Devices to combine Your tablet Safe. How do i do i thought possible for different times are there a convenience control module coding. Sound when locking doors Mercedes-Benz Forum BenzWorld. Download Car Lock Ringtone Mp3 Sms RingTones. For vehicle was triggered, two seconds then press a bit irritating. You exit key is no sound horn honk is separated from being badly injured or security. Other Plans Overview International services Connected car plans Employee discounts Bring her own device. Or just match me enable push notification on when phone share it. General Fit Modifications Discussion no beep you you might lock twice ok so. 2015 Door Lock Horn Beep Honda CR-V Owners Club. How do not lock this option available on a text between my phone has expired. -
Installation Instructions – ALL JMS Pedalmax Kit Part Numbers Drive-By-Wire Electronic Throttle Enhancement Device
Installation Instructions – ALL JMS PedalMAX Kit Part Numbers Drive-By-Wire Electronic Throttle Enhancement Device Included in the PedalMAX kit: (1) PedalMAX Control Box (1) PedalMAX Wire Harness (1) On-the-fly Control Knob (4) Cable ties Please read the complete installation instructions before attempting to install this product. PedalMAX will increase the torque and responsiveness of the OEM drive-by-wire throttle assembly. PedalMAX mounts inside the vehicle cabin, under the dash near the accelerator pedal sensor. Make sure that PedalMAX does not come into direct contact with extreme engine heat (+370F). Step 1 - Connect the Assembly: Attach the black PedalMAX device to the wiring harness; plug the device into the 26-pin connector firmly, until latched. Step 2 - Important: Disconnect the positive terminal of the battery before installing this product. If you do not disconnect the battery the factory computer will not learn the correct starting pedal position. Locate the pedal position sensor assembly. It is located on the top of the accelerator pedal. JMS Chip USA ● 240 Springview Commerce Drive, BLD 1 STE J ● DeBary FL 32713 ● 601.766.9424 www.jmschip.com • PX5000-I-2019-1 02/12/2019 Step 3 - Unplug the wiring harness from the pedal position sensor. Note: To separate most connectors from the sensor: slide back or release the locking tab on the harness connector, or press the tab down on the connector and unplug from the pedal. Step 4 – Connect the in-line Harness Plug the PedalMAX device in-line between the pedal position sensor and OE wiring harness by connecting the male and female PedalMAX connectors to the Original Factory connector and sensor. -
TIP SHEET Installation Tips for RS4 + EVO-RIDE + SPDT T2519
TIP SHEET Installation Tips for RS4 + EVO-RIDE + SPDT T2519 2009-2011 Ford Crown Victoria 2007-2012 Ford F-250 Super Duty 2009-2012 Ford E-150 2007-2012 Ford F-350 Super Duty 2009 Ford E-150 Econoline Club Wagon 2007-2011 Ford F-450 Super Duty 2008-2010 Ford E-250 2005-2007 Ford Five Hundred 2010 Ford E-250 Econoline 2009-2012 Ford Flex 2010 Ford E-350 Super Duty 2000-2012 Ford Focus 2009 Ford E-450 Econoline Super Duty Stripped 2004-2007 Ford Freestar 2007-2013 Ford Edge 2006-2012 Ford Fusion 2003-2005 Ford Excursion 2005-2006 Ford GT 2002-2012 Ford Expedition 2005-2013 Ford Mustang 2002-2013 Ford Explorer 2001-2011 Ford Ranger 2004-2010 Ford Explorer Sport Trac 2000-2012 Ford Taurus 2004-2012 Ford F-150 2002-2005 Ford Thunderbird 2004 Ford F-150 Heritage 2001-2003 Ford Windstar *(reglar key vehicles ONLY)* Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts to do-it-yourself installers since 1999. We’ve put this tip sheet together to help you with your installation. The purpose of this sheet is to help you organize your installation - not to replace your installation manual. You will still need to refer to that. If you provided us with your vehicle model/year at the time of purchase, you will have a wiring chart for your particular vehicle. We’re going to refer to that a lot. If you do not have the wiring chart, email us at [email protected] so we can send you a copy. -
Security in Smart Cyber-Physical Systems
CHAPTER 11 Security in Smart Cyber-Physical Systems: A Case Study on Smart Grids and Smart Cars Sandeep Nair Narayanan*, Kush Khanna†, Bijaya Ketan Panigrahi†, and Anupam Joshi* *University of Maryland Baltimore County, Baltimore, MD, United States †Indian Institute of Technology Delhi, New Delhi, India 1 INTRODUCTION Across the globe, cities are expanding in size and infrastructure. The idea of Smart Cities plays a vital role in offering higher efficiency, comfort, awareness, and convenience to end users. Harrison et al. [1] describe the Smart City as an instrumented, interconnected, and intelligent city. They instrument different sectors of smart infrastructure, such as smart energy, smart transportation, smart governance, smart healthcare, smart buildings, and so forth to capture real- world data and interconnect them to share this data among different services. The shared data is then used to make intelligent operational decisions using complex analytics and provide better facilities to end users. Smart Cyber- Physical Systems (CPSs) are essential components of all smart infrastructure. According to the National Science Foundation (NSF),1 “Cyber-physical systems integrate sensing, computation, control and networking into physical objects and infrastructure, connecting them to the Internet and each other.” Smart cars and smart grids are two CPS domains that have demonstrated tremendous growth over the past few decades. However, the capabilities of these CPSs to influence critical infrastructure make them a lucrative target for hackers. Some of the attacks even have a direct impact on the economy of a nation. For example, consider the attack on the Ukrainian smart grids [2]. It left a whole city without heat and electricity in the cold of December for many hours. -
A Practical Design of Anti-Theft Car Protection System Based on Microcontroller
American Journal of Applied Sciences 9 (5): 709-716, 2012 ISSN 1546-9239 © 2012 Science Publications A Practical Design of Anti-Theft Car Protection System Based on Microcontroller Mohammed Abuzalata, Muntaser Momani, Sayel Fayyad and Suleiman Abu-Ein Departments of Mechatronics and Mechanical Engineering, Faculty of Engineering, Al-Balqa’ Applied University, Technology, Amman, Jordan Abstract: Problem statement: This study presents a new design for an anti-theft protection System as an inexpensive solution to protect cars from theft and from non-authorized users by using microcontroller-based system. Approach: Three stages of protection to strengthen the security of the car: Firstly, when the user access the car by the car key and entered the wrong password, the power is remain disable. If the power shifted by others, the second level comes by disabling the starter motor from being turned on, so the stolen keys cannot turn the car on. Results: Assuming that the thief or non-authorized person connected the starter motor directly to the car battery, the car well not turned on because the directional valve is set to the case where the fuel is fed back to the fuel tank and no fuel is pumped into the engine, which is the third security level. Conclusion/Recommendations: A microcontroller is programmed using C language, a directional valve is controlled by microcontroller to take the proper valve position to allow the engine to start or not. This system is worked properly and tested successfully. Key words: Anti-theft system, automobile technology, inexpensive solution, international interpol statistics, insurance companies, password protected system, non-authorized person connected, tested successfully INTRODUCTION GPS) to provide continuous position and velocity tracking of moving vehicle (Alaqeeli et al ., 2003), A new international Interpol Statistics revealed that presented a novel signal acquisition and tracking 4.2 million vehicles reported stolen in 2008 from 149 method that reduces the number of operations, countries around the world. -
Installer's Manual
M8700 INSTALLER’S MANUAL Release 00 Dear Installer, Many thanks for choosing a MetaSystem product! Please read this manual carefully as you’ll find it easier to understand the various possibilities that the range of M8700 products can offer you. After you have installed the product according to the “installation instructions” supplied with the product, and which you will also find below, the alarm control unit must be programmed in order to customise the product based on the vehicle that it is installed on. When you have finished the job, it is important to remember to give the user’s handbook to the owner of the vehicle and to show him the various features of his car alarm system. Please remember to fill out the “certificate of installation” in the user’s handbook (European Directive) and to give the owner the red card that he will need should he decide to order any extra remote controls, as well as the OVERRIDE CARD where you should have already written the owner’s emergency code, customised according to his choice. Best Regards ! INDEX - Introduction 2 - The Range of M8700 products 3 - Technical specifications 3 - Instructions for installation 4 - Customising the operating functions 6 - Checking the setting of the operating functions 6 - Description of the operating functions 7 - The override code 10 - Remote controls 13 - Emergency keys 13 - Checking the remote controls and emergency keys 13 - The garage function 13 - The control unit’s power supply 14 - Memory of triggered alarms 14 - Final Check 14 - Instructions for use 15 2 SPECIFICATIONS -
722 Car Alarm 2 Way
Genius Car Alarm 722 Car Alarm 2 way www.alarmasgenius.com 1 Genius Car Alarm Dear customer, Thank you very much for your purchasing of the 2 way car alarm products we manufactured. 1. This product is designed to install on all 12V universal vehicle. The system possesses multi-functions. For your understanding about the product, read the instruction carefully to implement its features fully. 2. If the system manual shows note like “refer Alarm function RF programmed”, this function becomes effective only after installation of additional equipment as is required by the system and also needed to be program. 3. Besides the functions described in the manual, the system can also support the following products: A) Engine Start Module: When combined with engine start module, it is possible to remote control and monitor of vehicle like engine start or shutdown (effective range about 1000 meters). B) GSM Module (Mobile Phone Module): When combined with GSM module, if the vehicle is in an abnormal condition, system will automatically notify two-way remote. Moreover, it will send a short message (SMS) and make a phone call to inform car owner about car condition. On the phone, GSM module will automatically play voice message which tells www.alarmasgenius.com 2 Genius Car Alarm car owner’s car condition. Of course, from outside call in to the machine go through the voice message guide to make command such as system arm/disarm, door lock/unlock, engine start/ shut down etc… You even can use short message (SMS) to control system. The system can be programmed to hold 4 different sets of phone numbers to inform car owner. -
Owners Manual
C70; 7; 3 2008-03-06T09:17:50+01:00; Page 1 evastarck '%%. IE&%&+' OwnersVOLVO C70 Manual WEB EDITION Kdakd8Vg8dgedgVi^dcIE&%&+':c\a^h]!6I%-'%!Eg^ciZY^cHlZYZc!<iZWdg\'%%-!8deng^\]i'%%%"'%%-Kdakd8Vg8dgedgVi^dc C70; 7; 3 2008-03-06T09:15:10+01:00; Page 1 evastarck DEAR VOLVO OWNER THANK YOU FOR CHOOSING VOLVO We hope you will enjoy many years of driving pleasure in your Volvo. The car has been designed for the safety and comfort of you and your passengers. Volvo is one of the safest cars in the world. Your Volvo has also been designed to satisfy all current safety and environmental requirements. In order to increase your enjoyment of the car, we recommend that you familiarise yourself with the equipment, instructions and maintenance information contained in this owner's manual. C70; 7; 3 2008-03-06T09:15:10+01:00; Page 2 evastarck Table of contents 00 Introduction 01 Safety 02 Instruments and controls Important information................................. 8 Seatbelts................................................... 16 Overview, left-hand drive cars.................. 40 Volvo and the environment....................... 11 Airbag system........................................... 19 Overview, right-hand drive cars................ 42 Airbags (SRS)............................................ 20 Driver's door control panel....................... 44 Activating/deactivating the airbag (SRS)*. 23 Combined instrument panel...................... 45 Side airbags (SIPS bags).......................... 25 Indicator and warning symbols................ -
Applications Ford Explorer Base L4 2.3L Ford Explorer Base V6 3.5L Ford Explorer Base L4 2.0L Ford Explorer Limited L4 2.3L
TECHNICAL SUPPORT 888-910-8888 ST463 COMMENTS INCLUDES 2 STRAPS; ST#1 = 43-3/4 in / ST#2 = 44-1/4 in. Applications Ford Explorer Base L4 2.3L YEAR FUEL FUEL DELIVERY ASP. ENG. VIN ENG. DESG 2019 GAS FI T H 99H 2018 GAS FI T H 99H 2017 GAS FI T H 99H 2016 GAS FI T H 99H Ford Explorer Base V6 3.5L YEAR FUEL FUEL DELIVERY ASP. ENG. VIN ENG. DESG 2019 GAS FI N 8 - 2018 GAS FI N 8 - 2017 GAS FI N 8 - 2016 GAS FI N 8 - 2015 GAS FI N 8 - 2014 GAS FI N 8 - 2013 GAS FI N 8 - 2012 GAS FI N 8 - 2011 GAS FI N 8 - Ford Explorer Base L4 2.0L YEAR FUEL FUEL DELIVERY ASP. ENG. VIN ENG. DESG 2015 GAS FI T 9 - 2014 GAS FI T 9 - 2013 GAS FI T 9 - 2012 GAS FI T 9 - Ford Explorer Limited L4 2.3L YEAR FUEL FUEL DELIVERY ASP. ENG. VIN ENG. DESG 2019 GAS FI T H 99H 2018 GAS FI T H 99H 2017 GAS FI T H 99H 2016 GAS FI T H 99H Ford Explorer Limited V6 3.5L YEAR FUEL FUEL DELIVERY ASP. ENG. VIN ENG. DESG 2019 GAS FI N 8 - 2018 GAS FI N 8 - 2017 GAS FI N 8 - 2016 GAS FI N 8 - 2015 GAS FI N 8 - 2014 GAS FI N 8 - 2013 GAS FI N 8 - 2012 GAS FI N 8 - 2011 GAS FI N 8 - Ford Explorer Limited L4 2.0L YEAR FUEL FUEL DELIVERY ASP.