DOCSLIB.ORG

Training Event Classes Details List

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Training Event Classes Details List TRAINING EVENT CLASSES DETAILS LIST Sponsor Classes with Bullets Instructor(s) Session 1 Category WTI BMW Fuel Trim Eric Scharping 1 BMW Short Term Fuel Trim (OBDII) Long Term Fuel Trim (OBDII) Relationship between Oxygen Sensor and Fuel Trim Fuel Trim fault and Control Limits European Fuel Trim (additive/multiplicative) Additive and Multiplicative Fuel Trim Relationship BMW Fuel Trim Fault Specs Fuel Trim Diagnosis - Where to start Case Studies - Different Failure Scenarios (OBDII) Review Test Techniques and Apply What Was Discussed Earlier Case Studies - Different Failure Scenarios (BMW specific) Review Test Techniques and Apply What was Discussed Earlier WTI BMW Motorsports 4 Luke Murray 1 BMW Covering all “F” Chassis Motorsports Vehicles including M3, M4, M5, and M6 A look at What BMW Learned From the E70 MX5 Functional Understanding of Engine Mechanical Features From: S63 S63TU S55 Engine Management Electrical System Overview Design Overview of "M" Specific Chassis System Features Description of Changes to Body Electronics Used on Motorsports Vehicles Autologic/WTI BMW Diesel Technology Brian Chaffe 1 BMW Covering M57, N57, and N47 Mechanical Design Overview Air Management Page 1 of 49 *Classes may be subject to changes Rev 03102016 TRAINING EVENT CLASSES DETAILS LIST Swirl Flaps EGR Turbo Systems Crankcase Ventilation Common Rail Fuel Systems Glowplug System Diagnostic and Service Advice WTI Mini Drivetrain Drew Wolfe 1 Mini 5 and 6 speed Manual Transmissions Clutch and Flywheel Designs CVT Diagnostics and Service Automatic Transmission Diagnostic Techniques All Wheel Drive Systems Overview Service and Repair Procedures That Will Save You Time Autologic/WTI Mini N16/18 Engine Mechanical Hands On Tom Morgan 1 Mini Engine Design Overview Turbocharging- Dual Scroll Valvetronic - Operation, Diagnostics and Common Issues MAP Controlled Oiling System Operation Cooling System Operation, Common Issues and Fixes Service and Repair Procedures and Bulletins WTI Understanding & Diagnosing Mercedes-Benz Ian Lebby 1 Mercedes Automotive Electronics, on-board bus systems Protons and Electrons: The Principals Electrical Circuits: Identification and Diagnosis Ohm's Law - Voltage Drop Calculations Diagnosing Series and Parallel Circuits Wire Repair Processes - Correct and Incorrect Procedures Dual Battery Systems - SAM’s Intelligent Battery Sensor (IBS) (B95) - How to Analyze the Data CAN & Networking, Data Frames, D2B, MOST, LIN, Flex Ray, Ethernet. Page 2 of 49 *Classes may be subject to changes Rev 03102016 TRAINING EVENT CLASSES DETAILS LIST On-Board Electrical System and Bus System Diagnostic Procedures Current Draw Testing, Calculation Spreadsheets Parasitic Current Draw Procedures WTI Mercedes M270 M274 M276 & M278 Johann Chua 1 Mercedes Introduction Engines 276, 278 & M270 Refresher M270, M274, M276 & M278 Introduction Stratified and Homogeneous Combustion Chain Drive, Tensioners and Replacement Checking and Setting Engine Timing Direct Injection, Injector Replacement Procedure High Pressure Fuel System Regulated Engine Oil Pump ECO Start/Stop Function High & Low Pressure Fuel Systems and Safety Concerns Charge Air System M278 Diagnosis and Troubleshooting Autologic/WTI Navigating STAR TekInfo Dennis Woll 1 Mercedes Star Wiring Workshop Resources DTB and LI Document Search Workshop Information With Workshop Resources and Diagnostics Workshop Information System (WIS) Electronic Parts Catalogue (EPC) Coding and Programming WTI VW & Audi - ODIS J2534 Factory Scan Tool John Thornton 1 VW/Audi Purchasing and Installing ODIS - This is a Challenge - Scan Tool Functions: Navigating the ODIS Window Guided Fault Finding Control Modules Tab Launching Test Plans Page 3 of 49 *Classes may be subject to changes Rev 03102016 TRAINING EVENT CLASSES DETAILS LIST Guided Functions Performing Adaptations Measuring Value Blocks Module Programming WTI VW / Audi - New Technology Don Bonelli 1 VW/Audi Nightvision System Overview ACC Adaptive Cruise Control Dynamic Steering Operation and Diagnostics Audi Select- Drive Select Systems Lane Change Assist Driver Information Systems Sport Differential Operational Overview Innovations in HVAC Stop Start Technology Innovative Thermal Management Networking & Overview Battery Energy Management WTI Toyota Engine Repair Dave Macholz 1 Toyota Factory Level Course Based on the Toyota 151 Engine Mechanical Repair Engine Components and Operation Engine Lubricants, Filtration, Coolant, and Sealers Precision Engine Measurements Engine Classifications, Serial Numbers and Identification Timing Chain and VVT-I Actuator Service and Installation Mechanical Valve Lash Adjustment and Shim Selection Top Mechanical Problems in Toyota and Lexus Engines Autologic/WTI LR2 3.2L DOHC Engine Tear Down - Live Demo David Meseck 1 Land Rover Engine Removal Technique Engine Teardown Live Demonstration Identifying Engine Controls Timing Gear Set up and Procedures Rear End Ancillary Drive Replacement Page 4 of 49 *Classes may be subject to changes Rev 03102016 TRAINING EVENT CLASSES DETAILS LIST Autologic/WTI Exploring Jaguar X351 New Technologies Steven White 1 Jaguar CAN Networks Electronic Tailgate Security System including Key Programming Auto High Beam Assist Air Suspension Adaptive Damping Common Faults to Look For Infotainment System Overview and Common Issues WTI Volvo - New E-drive Engine Allen Osborne 1 Volvo Overview of the All New Design Done in House at Volvo Component Operation and Diagnostics Including Oil pressure, Coolant flow, Variable cam control, Direct injection Systems XC90 and S90 Platform Enhancements Volvo Hybrid technology Overview WTI Engine Mechanical & Vacuum Waveforms Ken Zanders 1 Diagnostic Vacuum Waveform Analysis Scope Set up PCV System Pressure Analysis Diagnosing Specific Engine Mechanical Issues Cranking Vacuum Waveform Analysis WTI Understanding & Diagnosing Electric Hybrid G Truglia 1 Diagnostic Vehicles Safety Training on Honda, Toyota, Ford DVOM Usage (CAT III Certified) Megaohm Meter Usage Hybrid Diagnosis: Using Scan Tools Labscope Measurements on Hybrids Testing High Voltage Batteries Regenerative Braking System Operational Overview AC to DC inverters and DC to DC converters Electric Assist Steering Page 5 of 49 *Classes may be subject to changes Rev 03102016 TRAINING EVENT CLASSES DETAILS LIST Common Service Procedures; Oil Changes, Cooling Systems, Tires, Brakes etc. Real World Testing Procedures WTI Waveform Analysis - How to Understand Any Jorge Menchu 1 Diagnostic Waveform Gain a Deeper Understanding of Circuit Analysis and Performance Diodes, Transistors and Capacitors Effects on Waveforms Coils, Pintles and Magnetic Fields Effects on Waveforms Understanding How Electronics Affect a Waveform and How it Can Show the Circuit Elements Case Studies in Waveform Analysis WTI Essential Electrical Checks You Should Know Dan Marinucci 1 Diagnostic Series Circuit Theory, Troubleshooting Tips Measuring Amps and Volts Correctly Vital Amps Tests such as Key-Off Battery Drain Performing Voltage Drop Tests Correctly Applying Voltage Drop to Computer and Sensor Circuits Dealing with "Open-Load" Conditions WTI EVAP Diagnostics & Techniques Bernie 1 Diagnostic Thompson Tools and techniques for EVAP failures Finding the small leaks The importance and use of the flow gauge Using CO2 for leak detection Foam detection for leaks WTI/ ZF ZF 6HP Transmission Operation & Diagnostics Mickey Figuroa 1 Diagnostic / Francisco Moreno ZF 6HP 6 speed Operation and Diagnostics Torque Converter Operation and Page 6 of 49 *Classes may be subject to changes Rev 03102016 TRAINING EVENT CLASSES DETAILS LIST Diagnostics Oil Change Service, Different Methods Diagnostics and Servicing of a Mechatronic unit Mechatronic Programming and Software Updates (Autologic) Common Problems and Solutions 6HP Applications: Audi, BMW, Jaguar, Ford, Land Rover, Lincoln, Kia, Hyundai, Bentley and Maserati WTI/ ZF Suspension & Powertrain Performance Dirk Fuchs 1 Diagnostic Suspension: Adjustable shock absorber Suspension settings and adjustment Driving behaviors Different settings in high and low speed Powertrain: Clutch and release performance systems in operation Clutch release system operation and diagnosis Different friction surfaces Race applications Denso Ford Hybrid Diagnostics Rick Kelly 1 Diagnostic Identifying module responsibility by model (PCM, TCM, TBCM, BECM, BPSM & BEC) Disabling, interlock circuits, inertia switches, and other power-up/power- down information Traction battery air & HVAC cooling systems Transaxle cooling and controls (MECS) Various combinations of electro- hydraulic braking systems Electric power steering & HVAC compressors Hybrid drive diagnostics, including high voltage isolation faults, battery performance, transaxle performance, battery cooling, and transaxle cooling Page 7 of 49 *Classes may be subject to changes Rev 03102016 TRAINING EVENT CLASSES DETAILS LIST Denso Chrysler Air Induction & Emissions Systems Dean Parsons 1 Diagnostic Crazy Fuel Trim & O2 sensor issues Great methods for finding elusive Rear Fuel Trim faults Diagnosing with O2 sensor “goal voltage” Variable Camshaft Timing (VCT) systems Partial throttle-by-camshaft engines with low idle vacuum New poorly-explained air injection systems The new GPEC PCM Definitively identifying failed PCMs vs. other faults Best tests for LCP, NVLD & ESIM EVAP systems Denso Hyundai
Load more

Recommended publications
  • High Accuracy Glow Plug-Integrated Cylinder Pressure Sensor for Closed Loop Engine Control
    High Accuracy Glow Plug-Integrated Cylinder Pressure Sensor for Closed Loop Engine Control Marek T. Wlodarczyk Optrand, Inc. ABSTRACT as Homogenous Charge Compression Ignition or Premixed Charge Compression Ignition [4]-[5]. The PressureSense Glow Plug combines a miniature cylinder pressure sensor with the automotive glow plug. In diesel passenger cars and light duty trucks a The 1.7mm diameter fiber optic-based sensor is welded preferred way of introducing a cylinder pressure sensor into the glow plug heater and the signal conditioner is into a combustion chamber is through a glow plug so no encapsulated into a “smart connector” located on the top engine head modifications are required. During the of the glow plug body. The sensor offers accuracy better recent few years a number of different concepts of glow than +/-2% of reading between 220 bar and 5 bar and plugs with pressure measuring capability has been +/-0.2 to +/-0.5 bar error for pressures below 5 bar. The proposed, including designs based on piezoelectric performance of “dummy” as well as glowing and washers mounted in various glow plug places [6]-[8] or a pressure sensing devices was evaluated on various glow plug heater acting as a transfer pin in conjunction engines and over a wide range of engine operating with a piezoresistive transducer [9]. It is to be noted, conditions. however, that all these devices, which in effect measure cylinder pressure “indirectly”, share some significant INTRODUCTION performance and durability-reliability drawbacks due such factors as valve and injection actuation, engine Cylinder pressure is the fundamental engine parameter vibrations, glow plug torque effect, engine head that provides the most direct and valuable information temperature changes, vibration damage and wear of for advanced control and monitoring systems of internal moving device components, and glow plug heater combustion engines [1].
    [Show full text]
  • Large Specalog for D6K2 Track-Type Tractor, AEHQ7228-01
    D6K2 Track-Type Tractor Engine Weights Engine Model Cat® C7.1 ACERT™ Operating Weight – XL (VPAT) 13 311 kg 29,346 lb Net Power (Maximum) Operating Weight – LGP (VPAT) 13 948 kg 30,750 lb SAE J1349 95 kW 128 hp ISO 9249 and EU 80/1269/EEC 97 kW 130 hp ISO 9249 (DIN) 132 hp D6K2 Features Powerful Productivity Boost your productivity with the new Stable Blade Control feature, dozer and undercarriage. Eco Modes and Auto Engine Speed Control help reduce overall fuel use. Experience maneuverability, precision and response, from the hydrostatic power train, power turn capability and standard electro-hydraulic controls. Comfortable Operator Station Work longer with less fatigue in the spacious and comfortable cab. The D6K2 is easy to handle and includes features that help your operators be more productive. Integrated Technologies Maximize utilization and control costs with the Cat Product Link™. AccuGrade™ Ready Option means easy installation of the performance enhancing Cat AccuGrade system. Serviceability and Customer Support Easy service, reliability and Cat dealer expertise keep you working and help to reduce overall costs. Contents Operator Station..................................................4 Ergonomic Controls ............................................5 Stable Blade Control...........................................5 Power Train ..........................................................6 Fuel Economy.......................................................6 Undercarriage .....................................................7 Integrated
    [Show full text]
  • Manual for the 46LA Engine
    It is of vital importance, before attempting to operate your engine, to read the general 'SAFETY INSTRUCTIONS AND WARNINGS' section on pages 2-6 of this booklet and to strictly adhere to the advice contained therein. ● Also, please study the entire contents of this instruction manual, so as to familiarize yourself with the controls and other features of the engine. ● Keep these instructions in a safe place so that you may readily refer to them whenever necessary. ● It is suggested that any instructions supplied with the aircraft, radio control equipment, etc., are accessible for checking at the same time. CONTENTS SAFETY INSTRUCTIONS AND WARNINGS CARBURETTOR 23~24 ABOUT YOUR O.S. ENGINE 2~6 CARBURETTOR AIR-BLEED INTRODUCTION 7 ADJUSTMENT 25 INSTALLATION OF THE ENGINE 8 TROUBLE SHOOTING WHEN THE ENGINE FAILS TO START 26~27 INSTALLATION OF SILENCER 9 CARE AND MAINTENANCE 28 NEEDLE-VALVE LOCATION 10 OPTIONAL PARTS & ACCESSORIES 29 BEFORE STARTING 10~12 ENGINE EXPLODED VIEW & PARTS LIST ADVICE ON SELECTION OF FUEL, 30~35 GLOW PLUG & PROPELLER 12~14 CARBURETTOR EXPLODED VIEW & PARTS LIST 36 STARTING THE ENGINE 14~22 THREE VIEW DRAWING 37~38 RUNNING-IN (Breaking-in) 23 1 SAFETY INSTRUCTIONS AND WARNINGS ABOUT YOUR O.S. ENGINE Remember that your engine is not a "toy", but a highly efficient internal- combustion machine whose power is capable of harming you, or others, if it is misused. As owner, you, alone, are responsible for the safe operation of your engine, so act with discretion and care at all times. If at some future date, your O.S.
    [Show full text]
  • CORVETTE C7/C6/C5/C4 the World's Fastest C7s and C6s Are Powered by Procharger
    ProCharger® Intercooled Supercharger Systems for CORVETTE C7/C6/C5/C4 The World's Fastest C7s and C6s are Powered by ProCharger “ When you blast past a Lamborghini like it was standing still, there is great satisfaction to be had in knowing that you did it effortlessly and for significantly less money.”–Vette CORVETTE CONTENTS Proven Performance, Reliability and Drivability .........................4 Street/Strip Systems C7 (LT1) .......................................................8 C7 Z06 (LT4) ...................................................10 C6 (LS3) ......................................................12 C6 Z06 (LS7) ..................................................14 C6 (LS2) ......................................................16 C5 (LS1) ......................................................18 C5 Z06 (LS6) ..................................................19 C4 (LT1/LT4) ...................................................20 C4 (TPI L98) ...................................................21 Thermal Advantage/Intercooling Leadership ..........................22 Centrifugal Innovation ..............................................28 P-1X/D-1X Superchargers ...........................................34 Race Systems Bypass Valves ................................................35 Racing Domination ............................................36 F-Series ......................................................37 Building the Power. 40 Leadership Through Innovation ......................................42 Word on the Street .................................................44
    [Show full text]
  • Compression & Fuel Pressure Testing Tools
    COMPRESSION & FUEL PRESSURE TESTING TOOLS 01543 679900 Tel: FOR THE LATEST PRODUCT INFORMATION VISIT OUR NEW WEBSITE: www.sykes-pickavant.com Petrol Compression Diesel Compression Diagnostic Pressure Testing Fuel Injection COMPRESSION & FUEL PRESSURE TESTING TOOLS TESTING & FUEL PRESSURE COMPRESSION Email: [email protected] www.sykes-pickavant.com 83 PETROL COMPRESSION Petrol Engine Compression Tester 31400000 • Checks cylinder compression to assist in the diagnosis of faulty valves, piston rings, cylinder heads & gaskets • 300mm flexible rubber hose with large, shock protected, easy to read dual scale gauge, for quick and accurate checks • Pressure relief valve allows repeated cylinder tests, without removing the gauge • Dual threads (M14 & M18) for quick and easy connection to spark plug ports Specification: • M14 / M18 dual thread coupling • Gauge Scale: 0 - 20bar, 0 - 190psi • Gauge Diameter: 83mm • Gauge to DIN16005, DIN16063, BS1780 standards Optional Extra - Petrol Engine Compression Tester - Extra Long Hose 31402000 • Fitted with extra-long 460mm flexible rubber hose for easy access to restricted plug ports Spare Parts: • 31400500 - Service Kit for Compression Tester Petrol Engine Compression Tester Kit 31400300 • Comprehensive kit, based on 31400000 Petrol Compression Tester - above • Suitable for vehicles with M10, M12, M14 and M18 Spark plug threads • Contents: - Petrol Compression Tester Gauge - Thread Chasers: M10 / M12, M14 / M18 - Spark Plug Port Extensions: M10, M12, M14 (x2), M18 - Service Kit of non-return valves
    [Show full text]
  • Fs30 40S.Pdf
    It is of vital importance, before attempting to operate your engine, to read the general 'SAFETY INSTRUCTIONS AND WARNINGS' section on pages 2-6 of this booklet and to strictly adhere to the advice contained therein. Also, please study the entire contents of this instruction manual, so as to familiarize yourself with the controls and other features of the engine. Keep these instructions in a safe place so that you may readily refer to them whenever necessary. It is suggested that any instructions supplied with the aircraft, radio control equipment, etc., are accessible for checking at the same time. CONTENTS SAFETY INSTRUCTIONS AND WARNINGS 2-6 RUNNING -IN 21 ABOUT YOUR O.S. ENGINE CARBURETOR 22-23 INTRODUCTION,BASIC ENGINE PARTS 7 CARBURETOR AIR-BLEED ADJUSTMENT 24 INSTALLATION 8 TROUBLE SHOOTING WHEN THE INSTALLATION OF CHOKE ROD, NEEDLE VALVE ENGINE FAILS TO START 25-26 EXTENSION 9 VALVE ADJUSTING 27-29 SILENCER, LINKAGE OF THROTTLE LEVER 10 CARE AND MAINTENANCE 30 BEFORE STARTING 10-12 GENUINE PARTS & ACCESSORIES 31 FUEL AND PRESSURE LINES 12 ENGINE EXPLODED VIEWS & PARTS LIST 32-35 CARBURETOR EXPLODED VIEWS ADVICE ON SELECTION OF FUEL, & PARTS LIST 36-37 GLOEPLUG & PROPELLER 13-14 THREE VIEW DRAWING 38-39 STARTING THE ENGINE 15-21 MEMO 40 1 SAFETY INSTRUCTIONS AND WARNINGS ABOUT YOUR O.S. ENGINE Remember that your engine is not a "toy", but a highly efficient internal- combustion machine whose power is capable of harming you, or others, if it is misused. As owner, you, alone, are responsible for the safe operation of your engine, so act with discretion and care at all times.
    [Show full text]
  • 15Cv Series.Pdf
    It is of vital importance, before attempting to operate your engine, to read the general 'SAFETY INSTRUCTIONS AND WARNINGS' section on pages 2-5 of this booklet and to strictly adhere to the advice contained therein. • Also, please study the entire contents of this instruction manual, so as to familiarize yourself with the controls and other features of the engine. • Keep these instructions in a safe place so that you may readily refer to them whenever necessary. • It is suggested that any instructions supplied with the vehicle, radio control equipment, etc., are accessible for checking at the same time. CONTENTS SAFETY INSTRUCTIONS AND WARNINGS ABOUT YOUR O.S. ENGINE 2~5 IF THE ENGINE FAILS TO START 16 INTRODUCTION, BASIC ENGINE PARTS 6 FINAL ADJUSTMENT 16~17 INSTALLATION 7~8 CARBURETTOR CLEANLINESS 17~18 AIR CLEANER TYPE102 8~9 CARE AND MAINTENANCE 19 NOTES CONCERNING EXPLODED VIEW & THE RECOIL STARTER 9~10 ENGINE PARTS LIST 20~23 GLOWPLUG 10~11 CARBURETOR EXPLODED VIEW & PARTS LIST 24~25 TOOLS, ACCESSORIES, etc. 11~12 O.S. GENUINE PARTS & CARBURETTOR CONTROLS 12~13 ACCESSORIES 26 PRESSURIZED FUEL SYSTEM 13 THREE VIEW DRAWING 27 STARTING THE ENGINE & RUNNING-IN('Breaking-in) 14~15 1 SAFETY INSTRUCTIONS AND WARNINGS ABOUT YOUR O.S. ENGINE Remember that your engine is not a "toy", but a highly efficient internal- combustion machine whose power is capable of harming you, or others, if it is misused. As owner, you, alone, are responsible for the safe operation of your engine, so act with discretion and care at all times. If at some future date, your O.S.
    [Show full text]
  • INTERNAL COMBUSTION ENGINE COOLING STRATEGIES: THEORY and TEST John Chastain Clemson University, [email protected]
    Clemson University TigerPrints All Theses Theses 12-2006 INTERNAL COMBUSTION ENGINE COOLING STRATEGIES: THEORY AND TEST John Chastain Clemson University, [email protected] Follow this and additional works at: https://tigerprints.clemson.edu/all_theses Part of the Engineering Mechanics Commons Recommended Citation Chastain, John, "INTERNAL COMBUSTION ENGINE COOLING STRATEGIES: THEORY AND TEST" (2006). All Theses. 23. https://tigerprints.clemson.edu/all_theses/23 This Thesis is brought to you for free and open access by the Theses at TigerPrints. It has been accepted for inclusion in All Theses by an authorized administrator of TigerPrints. For more information, please contact [email protected]. INTERNAL COMBUSTION ENGINE COOLING STRATEGIES: THEORY AND TEST A Thesis Presented to the Graduate School of Clemson University In Partial Fulfillment of the Requirements for the Degree Master of Science Mechanical Engineering by John Howard Chastain, Jr. December 2006 Accepted by: Dr. John Wagner, Committee Chair Dr. Richard Figliola Dr. Darren Dawson ABSTRACT Advanced automotive thermal management systems integrate electro-mechanical components for improved fluid flow and thermodynamic control action. Progressively, the design of ground vehicle heating and cooling management systems require analytical and empirical models to establish a basis for real time control algorithms. One of the key elements in this computer controlled system is the smart thermostat valve which replaces the traditional wax-based unit. The thermostat regulates the coolant flow through the radiator and/or engine bypass to control the heat exchange between the radiator’s coolant fluid and the ambient air. The electric water pump improves upon this concept by prescribing the coolant flow rate based on the engine’s overall operation and the driver commands rather than solely on the crankshaft speed.
    [Show full text]
  • Importance of Glow Plugs in Automotive Diesel Engines: a Review
    www.ijemr.net ISSN (ONLINE): 2250-0758, ISSN (PRINT): 2394-6962 Volume-6, Issue-1, January-February-2016 International Journal of Engineering and Management Research Page Number: 221-224 Importance of Glow Plugs in Automotive Diesel Engines: A Review Dr. Nagaraj Parisara1, Dr. B.R. Kiran2 1Department of Environmental Science, Sahyadri Science College (Autonomous) , Shivamogga, Karnataka, INDIA 2Research & Teaching Assistant in Environmental Science, DDE, Kuvempu University, Shankaraghatta, Karnataka, INDIA ABSTRACT engines can be difficult to start because the mass of the The importance of glow plugs used in automotive cylinder block and cylinder head absorb the heat of diesel engines is reviewed based on published literature. A compression, preventing ignition (which relies on that glow plug resembles a short metal pencil. The heating heat). Pre-chambered engines make use of small electric filament is fitted into its tip. Glow plug filaments made of heaters inside the pre-chambers glow plugs while, the certain materials, like platinum and iridium, that are direct-injected engines have these glow plugs in the resistant to high temperature. Glow plugs have high resistance to chemical, mechanical, and thermal loads and combustion chamber. The glow plug is a pencil-shaped provide long life for diesel engines. piece of metal with a heating element at the tip ( Figure 1). This heating element, when electrified, heats due to Keywords--- Automotive, Glow Plug, Diesel Engines, its electrical resistance and begins to emit light in the High temperature visible spectrum, hence the term "glow"-plug. The visual effect is very similar to that of a toaster. The fuel injector spray pattern then impinges directly upon the hot tip of the I.
    [Show full text]
  • Performance and Economics of Catalytic Glowplugs And
    August 2003 • NREL/SR-540-34286 Performance and Economics of Catalytic Glow Plugs and Shields in Direct Injection Natural Gas Engines for the Next Generation Natural Gas Vehicle Program Final Report J.P. Mello, D. Bezaire, S. Sriramulu, and R. Weber TIAX, LLC Cambridge, Massachusetts National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401-3393 NREL is a U.S. Department of Energy Laboratory Operated by Midwest Research Institute • Battelle • Bechtel Contract No. DE-AC36-99-GO10337 August 2003 • NREL/SR-540-34286 Performance and Economics of Catalytic Glow Plugs and Shields in Direct Injection Natural Gas Engines for the Next Generation Natural Gas Vehicle Program Final Report J.P. Mello, D. Bezaire, S. Sriramulu, and R. Weber TIAX, LLC Cambridge, Massachusetts NREL Technical Monitor: R. Rehn Prepared under Subcontract No. NDX-2-31070-02 National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401-3393 NREL is a U.S. Department of Energy Laboratory Operated by Midwest Research Institute • Battelle • Bechtel Contract No. DE-AC36-99-GO10337 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or any agency thereof.
    [Show full text]
  • 18Tm-Tmaxx-Manual.Pdf
    CONTENTS SAFETY INSTRUCTIONS AND FINAL ADJUSTMENT-------------------20-22 WARNINGS ABOUT YOUR O.S. ENGINE ---- 2-5 CARBURETORCLEANLINESS--------------22 ENGINE CONSTRUCTION ---------------- 6 CARE AND MAINTENANCE------------ 23-24 NOTES WHEN APPLYING AN ELECTRIC STARTER ----------------------------- 7 CHECKING THE ENGINE-----------------25 ABOUTTHE ENGINE -------------------- 8 TROUBLE SHOOTING----------------- 26-29 BEFORE STARTING-------------------8-10 ENGINE EXPLODED VIEW & PARTS LIST--- 30-31 CARBURETOR EXPLODED VIEW & BASIC ENGINE PARTS ----------------- 10 PARTSLIST----------------------------------------------32-33 CARBURETOR CONTROLS---------------11 O.S. GENUINE PARTS & ACCESSORIES-----------34 FACTS ABOUT GLOWPLUG--------------12 THREE VIEW DRAWING --------------------35 INSTALLATION OF THE CARBURETOR ----- 13 GUARANTEED TO KEEP YOUR INSTALLATION---------------------- 13-16 R/C CAR RUNNING WELL------------------36-39 STARTING THE ENGINE & RUNNING-IN------17-19 LIMITED WARRANTY---— --------------- 41 1 SAFETY INSTRUCTIONS AND WARNINGS ABOUTYOUR O.S. ENGINE Remember that your engine is not a "toy", but a highly efficient internal- combustion machine whose power is capable of harming you, or others, if it is misused. As owner, you, alone, are responsible for the safe operation of your engine, so act with discretion and care at all times. If at some future date, your O.S. engine is acquired by another person, we would respectfully request that these instructions are also passed on to its new owner. The advice which follows applies basically to ALL MODEL ENGINES and is grouped under two headings according to the degree of damage or danger which might arise through misuse or neglect. WARNINGS NOTES These cover events which These cover the many other might involve serious (in possibilities, generally less obvious extreme circumstances, even sources of danger, but which, under fatal) injury.
    [Show full text]
  • Contents of This Instruction Manual, So As to Familiarize Yourself with the Controls and Other Features of the Engine
    It is of vital importance, before attempting to operate your engine, to read the general 'SAFETY INSTRUCTIONS AND WARNINGS' section on pages 2-5 of this booklet and to strictly adhere to the advice contained therein. Also, please study the entire contents of this instruction manual, so as to familiarize yourself with the controls and other features of the engine. Keep these instructions in a safe place so that you may readily refer to them whenever necessary. It is suggested that any instructions supplied with the vehicle, radio control equipment, etc., are accessible for checking at the same time. CONTENTS SAFETY INSTRUCTIONS AND STARTING THE ENGINE & RUNNING-IN WARNINGS ABOUT YOUR O.S. ENGINE 2-5 ('Breaking-in) 18-22 ENGINE CONSTRUCTION, NOTES WHEN FINAL ADJUSTMENT 23-25 APPLYING AN ELECTRIC STARTER 6-7 CARE AND MAINTENANCE 26-27 ABOUT THE WARRANTY ABOUT THE ENGINE 8-9 TROUBLE SHOOTING 28-31 TOOLS, ACCESSORIES, etc. ENGINE EXPLODED VIEW &PARTS LIST 32-33 BASIC ENGINE PARTS 10-12 CARBURETOR EXPLODED VIEW &PARTS LIST 34-35 INSTALLATION OF THE STANDARD ACCESSORIES, GLOWPLUG 13-14 O.S. GENUINE PARTS & ACCESSORIES 36-37 THREE VIEW DRAWING 38 INSTALLATION , CARBURETOR CONTROLS 12F 15-17 1 SAFETY INSTRUCTIONS AND WARNINGS ABOUT YOUR O.S. ENGINE Remember that your engine is not a "toy", but a highly efficient internal- combustion machine whose power is capable of harming you, or others, if it is misused. As owner, you, alone, are responsible for the safe operation of your engine, so act with discretion and care at all times. If at some future date, your O.S.
    [Show full text]