LENS PROTECTION FIXTURE PRESERVATION Paint Booth ● Powder Booth ● Blast Booth

Total Page：16

File Type：pdf, Size：1020Kb

LENS PROTECTION FIXTURE PRESERVATION Paint Booth ● Powder Booth ● Blast Booth CLING-ON PLASTIC LENS ROLL FILM Transparent roll film protects windows and light fixtures from over-spray in paint booths. Application and removal is quick and easy making this product a clear choice for your cleanup solution. • 3 Mil plastic film with custom acrylic adhesive • Protects lens coverings from overspray • Applies easily to clean lens • Available In 12in., 18in., and 25in. widths • 100 Ft. per roll Part # Description 3312 Dispenser Handle (For 12” and 18” wide rolls only) 3263 12in. wide film roll. 3188 18in. wide film roll. 4348 25in. wide film roll. Single roll. PRE-CUT LENS SHEETS (CLEAR) Part # Description Transparent, self-adhesive sheets protect windows and light fixtures from over-spray in paint booths. 3800 13in. x 51in. (20 sheets/pad) Case Qty: 6 Pads Each pad unit consists of 20 individual sheets that are tabbed and peel off for easy removal after use. 4855 24in. x 50in. (20 sheets/pad) Case Qty: 6 Pads With easy installation and quick changeover this product is a clear 5303 18in. x 46in. (20 sheets/pad) Case Qty: 6 Pads choice for your cleanup solution. BLAST BOOTH LENS COVER KITS (For use with the Slim Light and 400 Series) 2.8" (70mm) PANEL • Helps protect fixture from FASTENERS high pressure blast media • 1/16” clear polycarbonate lens 29.0" • Lenses are easily interchangeable (736.6mm) • Perfect for rear access fixtures • For front access, lens cover needs to be removed for relamping. Part Number Description 29.0" 3318 Lens Kit (4 lamp fixture) (736.6mm) 3316 Lens Only (4 lamp fixture) 7668 Lens Kit (6 lamp fixture) 7682 Lens Only (6 lamp fixture) 1-800-854-0021 www.ldpi-inc.com Product design and specifications subject to change without notice. LDPI® is a registered trademark of LDPI, Inc. © LDPI, Inc. Visit www.ldpi-inc.com for the most current version and photometric data. v01.31.20 LENS PROTECTION FIXTURE PRESERVATION Paint Booth ● Powder Booth ● Blast Booth BLAST BOOTH LENS COVER KIT (For use with the LE484 Series) • Helps protect fixture from high pressure blast media • 1/8” clear polycarbonate lens • Lenses are easily interchangeable Part Number Description 17650 Lens Kit 17649 Lens Only 14.00" (355.6mm) 14.00" (355.6mm) 24.75" (628.7mm) 1-800-854-0021 www.ldpi-inc.com Product design and specifications subject to change without notice. LDPI® is a registered trademark of LDPI, Inc. © LDPI, Inc. Visit www.ldpi-inc.com for the most current version and photometric data. v01.06.20.

Copy Link

Recommended publications

Determination of Focal Length of a Converging Lens and Mirror
Physics 41- Lab 5 Determination of Focal Length of A Converging Lens and Mirror Objective: Apply the thin-lens equation and the mirror equation to determine the focal length of a converging (biconvex) lens and mirror. Apparatus: Biconvex glass lens, spherical concave mirror, meter ruler, optical bench, lens holder, self-illuminated object (generally a vertical arrow), screen. Background In class you have studied the physics of thin lenses and spherical mirrors. In today's lab, we will analyze several physical configurations using both biconvex lenses and concave mirrors. The components of the experiment, that is, the optics device (lens or mirror), object and image screen, will be placed on a meter stick and may be repositioned easily. The meter stick is used to determine the position of each component. For our object, we will make use of a light source with some distinguishing marking, such as an arrow or visible filament. Light from the object passes through the lens and the resulting image is focused onto a white screen. One characteristic feature of all thin lenses and concave mirrors is the focal length, f, and is defined as the image distance of an object that is positioned infinitely far way. The focal lengths of a biconvex lens and a concave mirror are shown in Figures 1 and 2, respectively. Notice the incoming light rays from the object are parallel, indicating the object is very far away. The point, C, in Figure 2 marks the center of curvature of the mirror. The distance from C to any point on the mirror is known as the radius of curvature, R.
[Show full text]
How Does the Light Adjustable Lens Work? What Should I Expect in The
How does the Light Adjustable Lens work? The unique feature of the Light Adjustable Lens is that the shape and focusing characteristics can be changed after implantation in the eye using an office-based UV light source called a Light Delivery Device or LDD. The Light Adjustable Lens itself has special particles (called macromers), which are distributed throughout the lens. When ultraviolet (UV) light from the LDD is directed to a specific area of the lens, the particles in the path of the light connect with other particles (forming polymers). The remaining unconnected particles then move to the exposed area. This movement causes a highly predictable change in the curvature of the lens. The new shape of the lens will match the prescription you selected during your eye exam. What should I expect in the period after cataract surgery? Please follow all instructions provided to you by your eye doctor and staff, including wearing of the UV-blocking glasses that will be provided to you. As with any cataract surgery, your vision may not be perfect after surgery. While your eye doctor selected the lens he or she anticipated would give you the best possible vision, it was only an estimate. Fortunately, you have selected the Light Adjustable Lens! In the next weeks, you and your eye doctor will work together to optimize your vision. Please make sure to pay close attention to your vision and be prepared to discuss preferences with your eye doctor. Why do I have to wear UV-blocking glasses? The UV-blocking glasses you are provided with protect the Light Adjustable Lens from UV light sources other than the LDD that your doctor will use to optimize your vision.
[Show full text]
Holographic Optics for Thin and Lightweight Virtual Reality
Holographic Optics for Thin and Lightweight Virtual Reality ANDREW MAIMONE, Facebook Reality Labs JUNREN WANG, Facebook Reality Labs Fig. 1. Left: Photo of full color holographic display in benchtop form factor. Center: Prototype VR display in sunglasses-like form factor with display thickness of 8.9 mm. Driving electronics and light sources are external. Right: Photo of content displayed on prototype in center image. Car scenes by komba/Shutterstock. We present a class of display designs combining holographic optics, direc- small text near the limit of human visual acuity. This use case also tional backlighting, laser illumination, and polarization-based optical folding brings VR out of the home and in to work and public spaces where to achieve thin, lightweight, and high performance near-eye displays for socially acceptable sunglasses and eyeglasses form factors prevail. virtual reality. Several design alternatives are proposed, compared, and ex- VR has made good progress in the past few years, and entirely perimentally validated as prototypes. Using only thin, flat films as optical self-contained head-worn systems are now commercially available. components, we demonstrate VR displays with thicknesses of less than 9 However, current headsets still have box-like form factors and pro- mm, fields of view of over 90◦ horizontally, and form factors approach- ing sunglasses. In a benchtop form factor, we also demonstrate a full color vide only a fraction of the resolution of the human eye. Emerging display using wavelength-multiplexed holographic lenses that uses laser optical design techniques, such as polarization-based optical folding, illumination to provide a large gamut and highly saturated color.
[Show full text]
Davis Vision's Contact Lens Benefits FAQ's
Davis Vision’s Contact Lens Benefits FAQ’s for Council of Independent Colleges in Virginia Benefits Consortium, Inc. How your contact lens benefit works when you visit a Davis Vision network provider. As a Davis Vision member, you are entitled to receive contact lenses in lieu of eyeglasses during your benefit period. When you visit a Davis Vision network provider, you will first receive a comprehensive eye exam (which requires a $15 copayment) to determine the health of your eyes and the vision correction needed. If you choose to use your eyewear benefit for contacts, your eye care provider or their staff will need to further evaluate your vision care needs to prescribe the best lens options. Below is a summary of how your contact lens benefit works in the Davis Vision plan. What is the Davis Vision Contact you will have a $60 allowance after a $15 copay plus Lens Collection? 15% discount off of the balance over that amount. You will also receive a $130 allowance toward the cost of As with eyeglass frames, Davis Vision offers a special your contact lenses, plus 15% discount/1 off of the balance Collection of contact lenses to members, which over that amount. You will pay the balance remaining after greatly minimizes out-of-pocket costs. The Collection your allowance and discounts have been applied. is available only at independent network providers that also carry the Davis Vision Collection frames. Members may also choose to utilize their $130 allowance You can confirm which providers carry Davis Vision’s towards Non-Collection contacts through a provider’s own Collection by logging into the member website at supply.
[Show full text]
Lecture 37: Lenses and Mirrors
Lecture 37: Lenses and mirrors • Spherical lenses: converging, diverging • Plane mirrors • Spherical mirrors: concave, convex The animated ray diagrams were created by Dr. Alan Pringle. Terms and sign conventions for lenses and mirrors • object distance s, positive • image distance s’ , • positive if image is on side of outgoing light, i.e. same side of mirror, opposite side of lens: real image • s’ negative if image is on same side of lens/behind mirror: virtual image • focal length f positive for concave mirror and converging lens negative for convex mirror and diverging lens • object height h, positive • image height h’ positive if the image is upright negative if image is inverted • magnification m= h’/h , positive if upright, negative if inverted Lens equation 1 1 1 푠′ ℎ′ + = 푚 = − = magnification 푠 푠′ 푓 푠 ℎ 푓푠 푠′ = 푠 − 푓 Converging and diverging lenses f f F F Rays refract towards optical axis Rays refract away from optical axis thicker in the thinner in the center center • there are focal points on both sides of each lens • focal length f on both sides is the same Ray diagram for converging lens Ray 1 is parallel to the axis and refracts through F. Ray 2 passes through F’ before refracting parallel to the axis. Ray 3 passes straight through the center of the lens. F I O F’ object between f and 2f: image is real, inverted, enlarged object outside of 2f: image is real, inverted, reduced object inside of f: image is virtual, upright, enlarged Ray diagram for diverging lens Ray 1 is parallel to the axis and refracts as if from F.
[Show full text]
Super-Resolution Imaging by Dielectric Superlenses: Tio2 Metamaterial Superlens Versus Batio3 Superlens
hv photonics Article Super-Resolution Imaging by Dielectric Superlenses: TiO2 Metamaterial Superlens versus BaTiO3 Superlens Rakesh Dhama, Bing Yan, Cristiano Palego and Zengbo Wang * School of Computer Science and Electronic Engineering, Bangor University, Bangor LL57 1UT, UK; [email protected] (R.D.); [email protected] (B.Y.); [email protected] (C.P.) * Correspondence: [email protected] Abstract: All-dielectric superlens made from micro and nano particles has emerged as a simple yet effective solution to label-free, super-resolution imaging. High-index BaTiO3 Glass (BTG) mi- crospheres are among the most widely used dielectric superlenses today but could potentially be replaced by a new class of TiO2 metamaterial (meta-TiO2) superlens made of TiO2 nanoparticles. In this work, we designed and fabricated TiO2 metamaterial superlens in full-sphere shape for the first time, which resembles BTG microsphere in terms of the physical shape, size, and effective refractive index. Super-resolution imaging performances were compared using the same sample, lighting, and imaging settings. The results show that TiO2 meta-superlens performs consistently better over BTG superlens in terms of imaging contrast, clarity, field of view, and resolution, which was further supported by theoretical simulation. This opens new possibilities in developing more powerful, robust, and reliable super-resolution lens and imaging systems. Keywords: super-resolution imaging; dielectric superlens; label-free imaging; titanium dioxide Citation: Dhama, R.; Yan, B.; Palego, 1. Introduction C.; Wang, Z. Super-Resolution The optical microscope is the most common imaging tool known for its simple de- Imaging by Dielectric Superlenses: sign, low cost, and great flexibility.
[Show full text]
Full-Color See-Through Three-Dimensional Display Method Based on Volume Holography
sensors Article Full-Color See-Through Three-Dimensional Display Method Based on Volume Holography Taihui Wu 1,2 , Jianshe Ma 2, Chengchen Wang 1,2, Haibei Wang 2 and Ping Su 2,* 1 Department of Precision Instrument, Tsinghua University, Beijing 100084, China; [email protected] (T.W.); [email protected] (C.W.) 2 Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China; [email protected] (J.M.); [email protected] (H.W.) * Correspondence: [email protected] Abstract: We propose a full-color see-through three-dimensional (3D) display method based on volume holography. This method is based on real object interference, avoiding the device limitation of spatial light modulator (SLM). The volume holography has a slim and compact structure, which realizes 3D display through one single layer of photopolymer. We analyzed the recording mechanism of volume holographic gratings, diffraction characteristics, and influencing factors of refractive index modulation through Kogelnik’s coupled-wave theory and the monomer diffusion model of photopolymer. We built a multiplexing full-color reflective volume holographic recording optical system and conducted simultaneous exposure experiment. Under the illumination of white light, full-color 3D image can be reconstructed. Experimental results show that the average diffraction efficiency is about 53%, and the grating fringe pitch is less than 0.3 µm. The reconstructed image of volume holography has high diffraction efficiency, high resolution, strong stereo perception, and large observing angle, which provides a technical reference for augmented reality. Citation: Wu, T.; Ma, J.; Wang, C.; Keywords: holographic display; volume holography; photopolymer; augmented reality Wang, H.; Su, P.
[Show full text]
Sunglasses for Pilots: Beyond the Image • Protecting a Pilots Most Important Sensory Asset • Selecting the Right Lenses • Radiation • Glare • New Materials • Frames
Sunglasses for Pilots: Beyond the Image • Protecting a pilots most important sensory asset • Selecting the right lenses • Radiation • Glare • New materials • Frames OK-13-0170 unglasses help safeguard a pilot’s most important sensory asset – vision. A quality pair of sunglasses is essential in the cockpit environment to optimize Svisual performance. Sunglasses reduce the effects of harsh sunlight, decrease eye fatigue, and protect ocular tissues from exposure to harmful solar radiation. Additionally, they protect the pilot’s eyes from impact with objects (i.e., flying debris from a bird strike, sudden decompression, or aerobatic maneuvers). Sunglasses can also aid the dark adaptation process, which is delayed by prolonged exposure to bright sunlight. RADIATION. Radiation from the sun can damage skin and eyes when exposure is excessive or too intense. Fortunately, the Earth’s atmosphere shelters us from the more hazardous solar radiation (i.e., gamma and X-ray); however, both infrared (IR) and ultraviolet (UV) radiation are present in our environment in varying amounts. This is dependent upon factors such as the time of day and year, latitude, altitude, weather conditions, and the reflectivity of surrounding surfaces. For example, exposure Atmospheric IR energy consists of long- to UV radiation increases by approximately 5 wavelength radiation (780 – 1400 nanometers percent for every 1,000 feet of altitude. [nm], see Figure 1). The warmth felt from the sun is provided by IR radiation and is thought to be harmless to the skin and eyes at normal atmospheric exposure levels. More hazardous to human tissues is short-wavelength UV radiation. UV is divided into three bandwidths: UVA (400 – 315 nm), UVB (315 – 280 nm), and UVC (< 280 nm).1 Excessive or chronic exposure to UVA and, to a greater extent, UVB can cause sunburn, skin cancers, and is implicated in the formation of cataracts, macular degeneration, and other eye maladies.
[Show full text]
Longitudinal Chromatic Aberration
Longitudinal Chromatic Aberration Red focus Blue focus LCA Transverse Chromatic Aberration Decentered pupil Transverse Chromatic Aberration Chromatic Difference of Refraction Atchison and Smith, JOSA A, 2005 Why is LCA not really a problem? Chromatic Aberration Halos (LCA) Fringes (TCA) www.starizona.com digitaldailydose.wordpress.com Red-Green Duochrome test • If the letters on the red side stand out more, add minus power; if the letters on the green side stand out more, add plus power. • Neutrality is reached when the letters on both backgrounds appear equally distinct. Colligon-Bradley P. J Ophthalmic Nurs Technol. 1992 11(5):220-2. Transverse Chromatic Aberration Lab #7 April 15th Look at a red and blue target through a 1 mm pinhole. Move the pinhole from one edge of the pupil to the other. What happens to the red and blue images? Chromatic Difference of Magnification Chief ray Aperture stop Off axis source Abbe Number • Also known as – Refractive efficiency – nu-value –V-value –constringence Refractive efficiencies for common materials water 55.6 alcohol 60.6 ophthalmic crown glass 58.6 polycarbonate 30.0 dense flint glass 36.6 Highlite glass 31.0 BK7 64.9 Example • Given the following indices of refraction for BK7 glass (nD = 1.519; nF = 1.522; nC = 1.514) what is the refractive efficiency? • What is the chromatic aberration of a 20D thin lens made of BK7 glass? Problem • Design a 10.00 D achromatic doublet using ophthalmic crown glass and dense flint glass Carl Friedrich Gauss 1777-1855 Heinrich Seidel 1842-1906 Approximations to
[Show full text]
Molecular Scale Imaging with a Smooth Superlens
Molecular Scale Imaging with a Smooth Superlens Pratik Chaturvedi1, Wei Wu2, VJ Logeeswaran3, Zhaoning Yu2, M. Saif Islam3, S.Y. Wang2, R. Stanley Williams2, & Nicholas Fang1* 1Department of Mechanical Science & Engineering, University of Illinois at Urbana- Champaign, 1206 W. Green St., Urbana, IL 61801, USA. 2Information & Quantum Systems Lab, Hewlett-Packard Laboratories, 1501 Page Mill Rd, MS 1123, Palo Alto, CA 94304, USA. 3Department of Electrical & Computer Engineering, Kemper Hall, University of California at Davis, One Shields Ave, Davis, CA 95616, USA. * Corresponding author Email: [email protected] RECEIVED DATE Abstract We demonstrate a smooth and low loss silver (Ag) optical superlens capable of resolving features at 1/12th of the illumination wavelength with high fidelity. This is made possible by utilizing state-of-the-art nanoimprint technology and intermediate 1 wetting layer of germanium (Ge) for the growth of flat silver films with surface roughness at sub-nanometer scales. Our measurement of the resolved lines of 30nm half-pitch shows a full-width at half-maximum better than 37nm, in excellent agreement with theoretical predictions. The development of this unique optical superlens lead promise to parallel imaging and nanofabrication in a single snapshot, a feat that are not yet available with other nanoscale imaging techniques such as atomic force microscope or scanning electron microscope. λ = 380nm 250nm The resolution of optical images has historically been constrained by the wavelength of light, a well known physical law which is termed as the diffraction limit. Conventional optical imaging is only capable of focusing the propagating components from the source. The evanescent components which carry the subwavelength information exponentially decay in a medium with positive permittivity (ε), and positive permeability (µ) and hence, are lost before making it to the image plane.
[Show full text]
Astronomical Optics 2. Fundamentals of Telescopes Designs 2.1
Astronomical Optics 2. Fundamentals of Telescopes designs 2.1. Telescope types: refracting, reflecting OUTLINE: Shaping light into an image: first principles Telescope elements: lenses and mirrors Telescope types – refracting (lenses) – reflecting (mirrors) Keeping the image sharp on large telescopes: challenges Optical principle and notations (shown here with lenses) Diameter = D Focal length = F F ratio = F/D δ Focal plane Pupil plane = aperture stop (usually) F gives the plate scale at the focal plane (ratio between physical dimension in focal plane and angle on the sky): δ = angle x F F/D gives physical size of diffraction limit at the focal plane = (F/D) λ Afocal telescope (= beam reducer) Instrument Pupil plane Focal plane Pupil plane (exit pupil) Shaping light into an image: first principles A telescope must bend or reflect light rays to make them converge to a small (ideally smaller that the atmospheric seeing size for ground telescopes) zone in the focal plane At optical/nearIR wavelengths, this is done with mirrors or lenses • choice of materials is important for lenses and mirrors • coatings (especially for mirrors) are essential to the telescope performance • optical surfaces of mirrors and lenses must be accurately controlled At longer wavelength (radio), metal panels or grid can be used At shorter wavelength (X ray, Gamma ray), materials are poorly reflecive (see next slide) The telescope must satisfy the previous requirement over a finite field of view with high throughput Field of view + good image quality → telescope designs
[Show full text]
1 Laboratory 11 Geometrical Optics Ii: Lenses and Images
LABORATORY 11 GEOMETRICAL OPTICS II: LENSES AND IMAGES Objectives To be able to explain the concepts of focal point and focal length To be able to explain image formation by a thin lens To be able to explain image formation by a pinhole To be able to determine the focal length by measurement and by calculation To be able to explain the concept of parallel rays To be able to explain the concepts of real image and virtual image To be able to explain the concept of magnification To be able to calculate the magnification To be able to explain the differences between different types of lenses To be able to draw and use ray diagrams To be able to discuss how the object distance, image distance and focal length are related To be able to use the thin lens equation to solve problems Overview: In this lab we will explore image formation by lenses. We will examine real and virtual images, upright and inverted images, the concepts of focal point and focal length for both converging and diverging lenses, discuss ray diagrams and verify the thin lens equation. Equipment: 1 optical bench 1 20cm lens 1 Pasco Light source 1 screen Exploration 1: Image Formation Exploraton 1.1 Take the pre-test for this lab. 1 Exploration 1.2 a. On the optical bench, start with the light source approximately 90cm away from the screen. Place the lens in between the light source and the screen, so that a clear image of the source appears on the screen. Remove the lens.
[Show full text]