DOCSLIB.ORG

Ethernet Extenders

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ethernet Extenders Ethernet Extenders » Power over Link™ Ethernet Extenders » Ethernet Extenders over Copper Wire » Ethernet Extenders over Coaxial Cable » Ethernet Extenders with Management Features » Ethernet Extenders with PoE — Break the 100-meter Ethernet barrier. Ethernet Extenders 1 www.EtherWAN.com Table of Contents Ethernet Extender Glossary 3 Ethernet Extender Connection Guide 5 Power over Link™ Ethernet Extenders 9 ED3638 Hardened 10/100BASE-TX PoL™/PoE Ethernet Extender over Coaxial Cable ��������������������������������������������������������������������������������� 9 ED3538 Hardened 10/100BASE-TX PoL/PoE Ethernet Extender over Copper Wires �������������������������������������������������������������������������������� 13 ED3238 10/100BASE-TX IEEE802�3af PoE Ethernet Extender over Coaxial Cable ������������������������������������������������������������������������������������� 17 Ethernet Extenders over Copper Pair 21 ED3541 Series Hardened 10/100BASE-TX Ethernet Extender ���������������������������������������������������������������������������������������������������������������������������� 21 ED3501 Series Industrial 10/100BASE-TX Ethernet Extender ����������������������������������������������������������������������������������������������������������������������������� 25 Ethernet Extenders over Coaxial Cable 29 ED3341 Series Hardened 10/100BASE-TX Ethernet Extender over Coaxial Cable ����������������������������������������������������������������������������������������������� 29 ED3344 Series Hardened 10/100/BASE-TX M12 Ethernet Extender over Coaxial Cable ������������������������������������������������������������������������������������� 33 ED3331 Series Industrial 10/100BASE-TX Ethernet Extender over Coaxial Cable ����������������������������������������������������������������������������������������������� 37 Ethernet Extenders 2 www.EtherWAN.com Ethernet Extender Glossary Ethernet Extender Glossary Ethernet Extender EtherWAN's Ethernet Extenders allow the extension of IP services beyond normal Ethernet distance limitations without changing cables, breaking the 100-meter Ethernet barrier. Upgrading an access control and/or surveillance system with new systems that communicate using IP technology can be a monumental task, especially when changing the wiring infrastructure, which can be more costly and time-consuming than upgrading the entire system. EtherWAN offers a solution to this dilemma. EtherWAN has developed a line of Ethernet Extenders that provide Ethernet connectivity over existing coaxial cables or regular telephone/communications cables. Ethernet Extenders are significantly more cost-effective compared to the cost of replacing cables, and they extend the life of existing installed infrastructure. Cat. 5 Only up to 100m ED3141 ED3101 IP Camera Copper Wires Up to 1.9 km ED3341 ED3331 IP Camera Coaxial Cable Up to 2.6 km Control Center Motion Detector ED3011 ED3011 Copper Wires Up to 6.2 km EL9100 EM1100 IP Camera Fiber Optics Up to120-160 km Ethernet Extender Glossary 3 www.EtherWAN.com Power over Link™ Power over Link™ (PoL™) technology allows data and power transmission over existing RJ11 telephone wires or coaxial cables. Like Power over Ethernet (PoE) technology, remote devices can be powered up by electricity in the transmission line without additional power adaptor. The remote device can also provides IEEE802.3af/ at PoE/PSE power up the end device. PoL technology facilitates IP camera installation. In the PoE/PD IP camera application, overall distance can reach 1000 meters and power plug position will not limit IP camera installation position. The benefits of using EtherWAN's Ethernet Extenders allow the addition of long-distance Ethernet connectivity to existing infrastructures without needing to install new cables; a. They minimize effort and cost, as there is no need to replace any existing cables. b. They work over longer distances - up to 1.9km (6,232ft) over copper wire or 2.6km (8,530ft) over coaxial cable. c. They have a hardened design for critical environments – models are rated for either -20°C to 60°C or -40°C to 75°C. d. They have Plug & Play capabilities. Simply connect a unit to one end of the wire and set the DIP switch to “local”, then connect another unit to the other end of the wire and set it to “remote”. When power is applied, all devices will be synchronized in just a few seconds to create an Ethernet link. e. PoL™ technology provides data and power transmission over one existing cable to reduce infrastructure construction cost. ED3238R ED3238T IP Camera Coaxial Cable Up to 180 m with power and data transmission Control IP Camera ED3538R ED3538T Center Copper Wires Up to 1.2 km Up to 2.2 km with data transmission ED3638R ED3638T IP Camera Copper Wires Up to1.8 km with power and data transmission Up to 2.2 km with data transmission Ethernet Extender Glossary 4 www.EtherWAN.com Ethernet Extender Connection Guide Ethernet Extender Connection Guide Power over Link >> Model Name ED3638 ED3538 ED3238 Interface 10/100 BASE-TX 1 1 1 Max. PoE Ports 1 (30W) 1 (30W) 1 (15.4W) Extension Interface RJ-11 - 1 - RJ-48 - - - Terminal Block - 1 - BNC 1 - 1 Mode of Operations Auto-negotiation, Auto-MDI/MDI-X √ √ √ Store & Forward √ √ √ Mechanical Casing aluminum aluminum aluminum Installation* D D C Dimensions (mm) (W x D x H) 50 x 110 x 135 50 x 110 x 135 46 x 98 x 25 Power Input No. of Power Inputs 3 3 1 Terminal Block 46 - 57VDC 46 - 57VDC - DC Jack 48VDC 48VDC 57VDC AC to DC Adapter - - √ Operating Temperature -10˚C to 50˚C - - √ -40˚C to 75˚C √ √ - Management Function RS-232 console Port - - - Web Management - - - α-Ring / α-Chain - - - Layer 2 Features** - - - Regulatory Approvals CE / FCC √ √ √ VCCI √ √ √ UL508 - - - ISA12.12.01 / UL1604 - - - IEC61850-3 / IEEE1613 - - - UL/cUL 60950-1 √ √ √ EN50121-4 - - - EN50155 - - - * C: Chassis, D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting ** Layer 2 Features include STP/RSTP/MSTP, VLAN, QoS, IGMP, GMRP, Bandwidth Rate Control, LACP, Port Trunking, Port Mirroring, Packet Filtering, IEEE802.1xSecurity, RMON 5 Copper >> NEW Model Name ED3575 Interface 10/100 BASE-TX 6 Max. 10/100/1000BASE-T 2 Max. 100/1000BASE-SFP 2 Extension Interface RJ-11 2 RJ-48 - Terminal Block 2 BNC - Mode of Operations Auto-negotiation, Auto-MDI/MDI-X √ Store & Forward √ Mechanical Casing aluminum Installation* D Dimensions (mm) (W x D x H) 60 x 125 x 145 Power Input No. of Power Inputs 2 Terminal Block 12 - 48VDC DC Jack - AC to DC Adapter - Operating Temperature -10˚C to 60˚C - -40˚C to 70˚C - -40˚C to 75˚C √ Management Function RS-232 console Port √ Web Management √ α-Ring / α-Chain √ Layer 2 Features** √ Regulatory Approvals CE / FCC √ VCCI √ UL508 - ISA12.12.01 / UL1604 - IEC61850-3 / IEEE1613 - UL/cUL 60950-1 √ EN50121-4 - EN50155 - * C: Chassis, D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting ** Layer 2 Features include STP/RSTP/MSTP, VLAN, QoS, IGMP, GMRP, Bandwidth Rate Control, LACP, Port Trunking, Port Mirroring, Packet Filtering, IEEE802.1xSecurity, RMON 6 Copper >> Model Name ED3541 NEW ED3501 NEW Interface 10/100 BASE-TX 1 1 Max. PoE Ports - - Extension Interface RJ-11 1 1 RJ-48 - - Terminal Block 1 1 BNC - - Mode of Operations Auto-negotiation, Auto-MDI/MDI-X √ √ Store & Forward √ √ Mechanical Casing aluminum aluminum Installation* D C, D, W Dimensions (mm) (W x D x H) 42 x 190 x 100 80.3 x 109.2 x 23.8 Power Input No. of Power Inputs 2 1 Terminal Block 12 - 48VDC - DC Jack - 12VDC AC to DC Adapter - √ Operating Temperature -10˚C to 60˚C - √ -40˚C to 70˚C - - -40˚C to 75˚C √ - Management Function RS-232 console Port - - Web Management - - α-Ring / α-Chain - - Layer 2 Features** - - Regulatory Approvals CE / FCC √ √ VCCI √ √ UL508 - - ISA12.12.01 / UL1604 √ (pending) - IEC61850-3 / IEEE1613 - - UL/cUL 60950-1 √ √ EN50121-4 - - EN50155 - - * C: Chassis, D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting ** Layer 2 Features include STP/RSTP/MSTP, VLAN, QoS, IGMP, GMRP, Bandwidth Rate Control, LACP, Port Trunking, Port Mirroring, Packet Filtering, IEEE802.1xSecurity, RMON 7 Coaxial >> Model Name ED3341 ED3344 ED3331 Interface 10/100 BASE-TX 1 1 (M12) 1 Max. PoE Ports - - - Extension Interface RJ-11 - - - RJ-48 - - - Terminal Block - - - BNC 1 1 1 Mode of Operations Auto-negotiation, Auto-MDI/MDI-X √ √ √ Store & Forward √ √ √ Mechanical Casing aluminum aluminum aluminum Installation* D, P, R D, P, R C, D, W Dimensions (mm) (W x D x H) 50 x 110 x 135 50 x 110 x 135 80.3 x 109.2 x 23.8 Power Input No. of Power Inputs 3 3 1 Terminal Block 12 - 48VDC 12 - 48VDC - DC Jack 12VDC 12 - 48VDC 12VDC AC to DC Adapter - - √ Operating Temperature -10˚C to 60˚C - - √ -40˚C to 70˚C √ - - -40˚C to 75˚C - √ - Management Function RS-232 console Port - - - Web Management - - - α-Ring / α-Chain - - - Layer 2 Features** - - - Regulatory Approvals CE / FCC √ √ √ VCCI √ √ √ UL508 √ √ √ ISA12.12.01 / UL1604 - - - IEC61850-3 / IEEE1613 - - - UL/cUL 60950-1 - - - EN50121-4 √ √ - EN50155 √ √ - * C: Chassis, D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting ** Layer 2 Features include STP/RSTP/MSTP, VLAN, QoS, IGMP, GMRP, Bandwidth Rate Control, LACP, Port Trunking, Port Mirroring, Packet Filtering, IEEE802.1xSecurity, RMON 8 Power over Link™ Ethernet Extenders ED3638 Hardened 10/100BASE-TX PoL™/PoE Ethernet Extender over Coaxial Cable UL 60950 ™ Overview The ED3638 Hardened Ethernet Extender utilizes EtherWAN’s exclusive Power over Link™ (PoL™) technology to deliver both PoE
Load more

Recommended publications
  • Black Box Multi-Rate Ethernet Extender User Manual
    ® ® BLACKNETWORK SERVICES BOX DECEMBER 2005 LB200A Multi-Rate Ethernet Extender Multi-Rate Ethernet Extender TX RX FDx 100M Link COL Link QOL Power Ethernet LINK CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX SUPPORT FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: [email protected] MULTI-RATE ETHERNET EXTENDER CE NOTICE The CE symbol on your Black Box equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). A Certificate of Compliance is available by contacting Technical Support. RADIO AND TV INTERFERENCE The Multi-Rate Ethernet Extender generates and uses radio frequency energy, and if not installed and used properly-that is, in strict accordance with the manu- facturer’s instructions-may cause interference to radio and television reception. The Multi-Rate Ethernet Extender has been tested and found to comply with the limits for a Class A computing device in accordance with specifications in Sub- part B of Part 15 of FCC rules, which are designed to provide reasonable protec- tion from such interference in a commercial installation. However, there is no guarantee that interference will not occur in a particular installation. If the Ether- net Extender does cause interference to radio or television reception, which can be determined by disconnecting the unit, the user is encouraged to try to correct the interference by one or more of the following measures: moving the comput- ing equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet (such that the com- puting equipment and receiver are on different branches).
    [Show full text]
  • VDSL2 Ethernet Extender Kit Over Single-Pair Wire - 10/100Mbps - 1.5Km
    VDSL2 Ethernet Extender Kit Over Single-Pair Wire - 10/100Mbps - 1.5km Product ID: 110VDSLEX2EU The StarTech.com VDSL2 Ethernet extender kit lets you connect a remote network segment or device to your network, using RJ11 phone cable. The network extender is a simple, reliable, and cost-effective solution for spanning your network across long distances. While maintaining high speeds, the extender also safeguards your investments by providing surge and ESD protection to your connected device. The VDSL2 extender reduces the hassle of networking your devices or workstations by overcoming the 330ft (100m) distance limitations of common CATx Ethernet cable. Now you can connect equipment at longer distances using existing RJ11 cable while still retaining 10/100Mbps fast-Ethernet speeds. Perfect for connecting isolated terminals, kiosks, or server rooms using single pair copper wire such as telephone cable, the extender kit lets you transmit and receive data at distances up to 5000ft (1500m) at 17Mbps, or 1000ft (300m) at 100Mbps throughput. This handy extender helps you network separate buildings at the same location, and saves you money. Using legacy plain old telephone service (POTS), you can deliver network access across an existing phone line infrastructure, which is perfect for older buildings. Alternatively, you can couple the extender with a single point-to-point RJ11 cable, giving you more options for providing network connections in situations where standard CATx wired or wireless access is unavailable or unreliable. A true out-of-the-box solution, the extender kit includes interchangeable transmitter and receiver units that are completely customizable using the integrated DIP switches.
    [Show full text]
  • VDSL2 Ethernet Extender Kit Over Single-Pair Wire - 10/100Mbps - 1.5Km
    VDSL2 Ethernet Extender Kit Over Single-Pair Wire - 10/100Mbps - 1.5km Product ID: 110VDSLEXT2 The StarTech.com VDSL2 Ethernet extender kit lets you connect a remote network segment or device to your network, using RJ11 phone cable. The network extender is a simple, reliable, and cost-effective solution for spanning your network across long distances. While maintaining high speeds, the extender also safeguards your investments by providing surge and ESD protection to your connected device. www.startech.com 1 800 265 1844 Connects equipment over longer distances The VDSL2 extender reduces the hassle of networking your devices or workstations by overcoming the 330ft (100m) distance limitations of common CATx Ethernet cable. Now you can connect equipment at longer distances using existing RJ11 cable while still retaining 10/100Mbps fast-Ethernet speeds. Perfect for connecting isolated terminals, kiosks, or server rooms using single pair copper wire such as telephone cable, the extender kit lets you transmit and receive data at distances up to 5000ft (1500m) at 17Mbps, or 1000ft (300m) at 100Mbps throughput. Cost-effective, reliable, and convenient This handy extender helps you network separate buildings at the same location, and saves you money. Using legacy plain old telephone service (POTS), you can deliver network access across an existing phone line infrastructure, which is perfect for older buildings. Alternatively, you can couple the extender with a single point-to-point RJ11 cable, giving you more options for providing network connections in situations where standard CATx wired or wireless access is unavailable or unreliable. All-in-one solution that’s easy to use A true out-of-the-box solution, the extender kit includes interchangeable transmitter and receiver units that are completely customizable using the integrated DIP switches.
    [Show full text]
  • 10/100/1000 Ethernet Extender | Ethernet Copper Extender | Perle
    10/100/1000 Ethernet Extender | Ethernet Copper Extender | Perle eX-S1110 Gigabit Ethernet Extenders 10/100/1000 Ethernet Copper Extender Extends 10/100/1000Base-T Ethernet up to 10,000 feet ( 3 KM ) over 2-wire 24 AWG twisted pair Hi-Speed – up to 200+ mbps aggregate line rate Transparent operation for all Ethernet protocols including 802.1Q VLAN packets and IP video compression schemes One or four 10/100/1000 Ethernet ports Advanced features: Link Pass-Through*, Interlink Fault Feedback*, Plug and Plan, Auto-MDIX and Loopback When you need to extend Ethernet services beyond the general IEEE 802.3 limits of 328ft / 100m, and new fiber cabling is cost prohibitive, Ethernet Extenders are the perfect solution. Perle Ethernet Extenders transparently extend up to four 10/100/1000 Ethernet connections across copper wiring. Use single twisted pair ( CAT5/6/7 ) or any existing copper wiring previously used in alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV applications. These simple and effective point to point Ethernet Copper Extenders are perfect for commercial buildings, residential units, hospitality environments, connecting a remote office or private-network backbone to a corporate LAN … anywhere you need Ethernet communication links between separated LANs or LAN devices (i.e. PCs, digital sensors, VoIP phones, WiFi APs, IP cameras and more). Perle’s advanced features such as Link Pass-Through*, Interlink Fault Feedback*, and Loopback allow Network administrators to “see everything” for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle Ethernet Extenders the smart choice for IT professionals.
    [Show full text]
  • Multiservice Ethernet Digital Distributed Antenna Systems
    Multiservice Ethernet Digital Distributed Antenna Systems Lu Bai Department of Engineering University of Cambridge This dissertation is submitted for the degree of Doctor of Philosophy Darwin College September 27th, 2018 Multiservice Ethernet Digital Distributed Antenna Systems Abstract Lu Bai Over 90% of wireless communications traffic occurs indoors and in-building wireless coverage is still one of the biggest obstacles for wireless users. As the growing demands on wireless capacity, coverage and connectivity have led to 4G and 5G standards, it has also become increasingly important to design and implement future-proof indoor wireless services in a cost effective manner. This thesis introduces a novel multi-service digital distributed antenna systems (DDAS) for indoor wireless coverage, which not only is able to transport multiple wireless carriers from different vendors and mobile operators, but also allows a converged architecture to integrate indoor wireless system with existing Ethernet infrastructures. The Cloud Radio Access Networks (C-RAN) has been suggested by major telecom vendors as the main architecture for last-mile coverage in 5G. However, the digital fronthaul interface defined in common public radio interface (CPRI), which is most widely adopted standard for C-RAN, requires very expensive infrastructures to be built due to the high data rate generated after digitisation. A solution has been introduced at the University of Cambridge previously to remove the digital redundancy by using a data compression technique which has shown 3-times higher transmission efficiency than CPRI. This thesis extends the concept to a more robust architecture allowing multiple wireless services to be transmitted simultaneously as well as being carried over standard Ethernet without losing the Quality of End-user Experience (QoE) and the Quality of Service (QoS) of in-building mobile network.
    [Show full text]
  • Introduction 100M VDSL2 Ethernet Extender
    100M VDSL2 Ethernet Extender Introduction 100M VDSL2 Ethernet Extender is a high-speed, Long Reach Ethernet Extender with one RJ45 Ethernet port and one RJ45 VDSL port. It is a bridge mode modem, well accommodating VDSL2 (Very-high-data-rate Digital Subscriber Loop) technology to extend Ethernet service over single-pair phone line. Supporting up to VDSL2 30a profile, 100M VDSL2 Ethernet Extender features 100 Mbps of symmetric data rate over the existing copper wires. It also supports both symmetric and asymmetric transmission, and can reach up to 100/100 Mbps bandwidth (line rate) within 300M or 10/10 Mbps (line rate) for 1 Km long range connections. The 100M VDSL2 Ethernet Extender also supports selectable CPE and CO mode. By selecting operation modes: one with CO mode and the other with CPE mode, users can connect two 100M VDSL2 Ethernet Extenders to establish a point-to-point connection. With its high performance and plug-n-play design, 100M VDSL2 Ethernet Extender is the ideal Long Reach Ethernet solution for ISPs and carriers to quickly deploy a high-speed IP-based network for triple play (video, voice and data) services. Features ▪ Cost effective bridge function to connect two Ethernet LAN ▪ Supports flow control on Fast Ethernet port via PAUSE frame or Back Pressure ▪ IEEE 802.1Q VLAN tag transparent ▪ Easy installation via simple plug-and-play ▪ Selectable CPE and CO mode via DIP switch: Two working modes are built in the same unit, which keep the flexibility of installation and easy provision of service but lower inventory of
    [Show full text]
  • ED3331 Series Industrial 10/100BASE-TX Ethernet Extender Over Coaxial Cable
    ED3331 Series Industrial 10/100BASE-TX Ethernet Extender over Coaxial Cable UL508 Overview The ED3331 Series Ethernet Extender enables the extension of Ethernet connectivity over existing coaxial cable allowing legacy infrastructure to be leveraged for IP networks and extending the Ethernet distance limitations of 100-meters. Upgrading an existing legacy control or surveillance system to a new IP-based system is a complicated task, especially when existing cable infrastructure is old coaxial cable. EtherWAN’s ED3331 Series provides Ethernet connection and extension over these existing copper wire cables minimizing the expense of pulling new cable infrastructure. The ED3331 Series is built with industrial grade specifications, providing wide temperature operation range from -10 to 60°C to overcome industrial environments. Incorporating VDSL technology, the ED3331’s BNC extender ports provide long distance transmission with 75Mbps rate at 200 meters, or 1Mbps at 2600 meters; 5 speed LED Indicators in the front panel provide easy lookup for the connection speed. Spotlight • UL508 Certification ◦ Specific design for industrial communication applications with UL508 safety certification • Transmission Speed LED Indication ◦ Supports ten speed LED Indicators • Industrial Operating Temperature Range ◦ From -10 to 60°C, wide operating temperature is suitable for outdoor cabinet installation • Optional Chassis System ◦ Supports wall mounting or EtherWAN's EMC1600 chassis system for easy group installation with power redundancy ED3331 1 www.EtherWAN.com
    [Show full text]
  • Exp-S1110PE Poe+ Gigabit Ethernet Extenders
    eXP-S1110PE PoE+ Gigabit Ethernet Extenders perle.com/products/10-100-1000-poe+-ethernet-extender.shtml 10/100/1000 PoE+ Ethernet Copper Extenders Extends 10/100/1000Base-T up to 10,000 feet ( 3 KM ) Power remote PoE+ devices across 2-wire twisted pair or coaxial cable On-board PoE power controller for true compatibility with IEEE 802.3af standard High-Speed – up to 200 mbps aggregate line rate Transparent operation for all Ethernet protocols including 802.1Q VLAN packets and IP video compression schemes Unique PD Reset feature enables a central site to reset the remote PoE device without a truck roll Advanced features: Link Pass-Through*, Interlink Fault Feedback*, Auto-MDIX and Loopback, Plug and Play - Auto configuration of VDSL Perle eXP-S1110PE PoE+ Gigabit Ethernet Extenders transparently extend Ethernet beyond the general IEEE 802.3at limits of 328ft / 100m while providing Power over Ethernet ( PoE+ ) to standards-based compliant devices such as IP cameras, VoIP phones and wireless access points. This technology enables users to transparently extend up to four 10/100/1000 Power over Ethernet connections across copper wiring. Use single twisted pair ( CAT5/6/7 ), coax or any existing copper wiring previously used in alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV applications. These PoE+ Ethernet Extenders are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle eXP-S1110PE PoE Ethernet Extenders provide up to 30 watts of power to Powered Devices (PDs). Learn more about PoE. These simple and effective point to point Ethernet Copper Extenders are perfect for commercial buildings, residential units, hospitality environments, and connecting a remote office or private- network backbone to a corporate LAN … anywhere you need 10/100/1000 Ethernet communication links for PoE+ devices up to 10,000ft (3KM) in distance.
    [Show full text]
  • VDSL2 LAN Extender User Manual
    VDSL2 LAN Extender User Manual Version 2.00 March 2014 Table of Contents Chapter 1 Introduction ........................................................................................................................... 3 1.1 Features ........................................................................................................................................................ 3 1.2 Specification .................................................................................................................................................. 4 1.3 Applications ................................................................................................................................................... 5 Chapter 2 Hardware Installation ............................................................................................................... 6 2.1 Front Panel .................................................................................................................................................... 6 2.2 Rear Panel ................................................................................................................................................... 10 2.3 Installation................................................................................................................................................... 10 Appendix I ................................................................................................................................................ 10 Appendix II ..............................................................................................................................................
    [Show full text]
  • 10/100 VDSL2 Ethernet Extender Kit Over Single Pair Wire – 1Km Startech ID: 110VDSLEXT
    10/100 VDSL2 Ethernet Extender Kit over Single Pair Wire – 1km StarTech ID: 110VDSLEXT The 110VDSLEXT VDSL Ethernet extender kit lets you span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity, allowing you to run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install and provides an out-of-the-box solution as both the Ethernet-VDSL extender and receiver units are included. A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles and distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming and data to share the same telephone pair without interference. Solution Diagrams: Backed by a StarTech.com 2-year warranty and free lifetime technical support. Applications Provide ethernet over copper connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether Extend network connectivity to remote areas of stadiums, auditoriums or other venues Industrial applications include controlling CNC machinery, polling bar code scanner data, administering process control equipment, and other harsh environment applications Monitor and control medical equipment, security keypads/card
    [Show full text]
  • NV-202MS User's Manual Ver A3
    NNVV--220022MM//SS PPoowweerr oovveerr LLAANN eexxtteennddeerr UUsseerr’’ss MMaannuuaall NV-202M/S Power over LAN extender USER’S MANUAL Ver. A.3 Copyright Copyright © 2016 by National Enhance Technology Corp. All rights reserved. Trademarks NETSYS is a trademark of National Enhance Technology Corp. Other brand and product names are registered trademarks or trademarks of their respective holders. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, National Enhance Technology Corp. hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETSYS reserves the right to make changes to the products described in this document without notice. NETSYS does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Maximum signal rate derived form IEEE Standard specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. Netsys does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
    [Show full text]
  • Perfection Solutions 2008
    perfection SolutionS 2008 KEEPING YOUR WORLD CONNECTED Signamax LLC, a US based company, is uniquely focused on providing high-performance networks and complex distribution solutions for customers worldwide. We provide complete unified products for copper and fiber based network connections designed for increased performance, reliability and easy installation. Signamax components are also popular for their valued performance/price ratio. Signamax worldwide support Our knowledgeable sales, technical support and engineering staff is dedicated to understand the requirements of our customers. With company headquarters in Washington DC and contracted distributors in 14 European countries and production in US, Europe and Asia, Signamax Connectivity Systems is uniquely positioned to deliver complete network solutions to our customers worldwide. Moreover, with our new central warehouse and sales center for Europe in Czech Republic we can now provide better service and support to all European partners and customers. Product solutions With Signamax Connectivity Systems you can get the right solution for comprehensive complete infrastructure. Signamax Network Connectivity Systems line represents one of the industry's best products for high performance Ethernet, Fast Ethernet and Gigabit Ethernet components including interface cards, switches and media converters supporting both copper and fiber optic based networks. Signamax Media Converters allow mixed media and speeds in networks for optimum performance. Signamax managed and unmanaged Switches range from 5 to 24 ports with support for 10/100Base to 1000Base speeds with both copper and fiber terminations. Signamax Wireless Products are perfectly suitable for mobile users and allow building of high-performance wireless networks and links. Signamax wireless networks are interactively compatible and allow high speeds of 11/22/54/108 Mbps.
    [Show full text]