DOCSLIB.ORG

Ultrasonic Metal Welding

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ultrasonic Metal Welding Ultrasonic metal welding Citation for published version (APA): Harthoorn, J. L. (1978). Ultrasonic metal welding. Technische Hogeschool Eindhoven. https://doi.org/10.6100/IR161561 DOI: 10.6100/IR161561 Document status and date: Published: 01/01/1978 Document Version: Publisher’s PDF, also known as Version of Record (includes final page, issue and volume numbers) Please check the document version of this publication: • A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal. If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the “Taverne” license above, please follow below link for the End User Agreement: www.tue.nl/taverne Take down policy If you believe that this document breaches copyright please contact us at: [email protected] providing details and we will investigate your claim. Download date: 29. Sep. 2021 ULTRASONIC METAL WELDING PROEFSCHRIFT TER VERKRIJGING VAN DE GRAAD VAN DOCTOR IN DE TECHNISCHE WETENSCHAPPEN AAN DE TECHNISCHE HOGESCHOOL EINDHOVEN OP GEZAG VAN DE RECTOR MAGNIFICUS, PROF. DR. P. VANDER LEEDEN, VOOR EEN COMMISSIE AANGEWEZEN DOOR HET COLLEGE VAN DEKANEN IN HET OPENBAAR TE VERDEDIGEN OP VRIJDAG 14 APRIL 1978 TE 16.00 UUR DOOR JOHANNES LEENDERT HARTHOORN GEBOREN TE 'S-HEERENHOEK DIT PROEFSCHRIFT IS GOEDGEKEURD DOOR DE PROMOTOREN PROF. DR. P.C. VEENSTRA EN PROF. IR. B.L. TEN HORN CONTENTS Contents List of symbols 1. INTRODUCTION 1 1.1. Ultrasonic metal welding ................................. 1 1.2. Historical background ................................... 3 1.3. Aim and contents ofthe present study ........................ 4 2. A REVIEW OF LITERATURE ON THE PHENOMENA ASSOCIATED WITH ULTRASONIC WELDS AND MECHANISMS OF WELD FOR· MATION . 7 2.1. Mechanical properties of ultrasonic welds . 7 2 .1.1. Tensile shear strength . 7 2.1.2. Cross-tension strength . 8 2 .1.3. Fatigue strength . 8 2.1.4. Leak tightness . 8 2 .1 .5. Reproducibility . 8 2.2. The influence of machine settings on tensile shear strength . 9 2.3. Metallographic studies . 10 2.3.1. Thermal effects .................................. 10 2.3.2. Plastic deformation and hardness measurements in the weld zone; cracks . 10 2.3.3. Contaminating surface layers . 11 2.4. Quantities measured during welding . 12 2.4.1. Temperature .................................... 12 2.4.2. Acoustic power and vibrational amplitude . 13 2.5. Weldingmechanism ..................................... 13 2.5 .1. Welding mechanism and possible welding operations . 13 2.5.2. Mechanism of ultrasonic welding ...................... 14 2.5 .3. Metallic adhesion . 15 2.5 .3 .1. The area of real contact . 15 2.5 .3 .2. Surface contaminants . 17 2.5 .3 .3. Formation of metal to metal bonds . 17 2.5 .3.4. Residual stresses . 19 2.5 .3 .5. Conclusions . 20 3. WELDING AND MEASURING EQUIPMENT .................... 21 3.1. Ultrasonic welding equipment . .. 21 3.1.1. The generator and power amplifier ..................... 21 3.1.2. The vibrating system . 21 3 .1.3. The anvil and the clamping mechanism . 22 3.2. Theoretical description of the vibrating system . 2: 3.2.1. The mechanical transformer . 2· 3.2.1.1. The cylindrical rod as a transformer ............. ·2· 3.2.1.2. The hi-cylindrical transformer ................. 2: 3.2.1.3. Series connection of a transformer and a waveguide . 2: 3.2.2. Mechanical losses in the transformer and waveguide . 2l 3.2.3. The complete vibrator . 2• 3.2.3.1. The ultrasonic transducer . 2• 3.2.3.2. The frequency adjustment system . 3 3.2 .3 .3. The real part of the load . 3: 3.2 .3 .4. The imaginary part of the load . 3. 3.2 .3 .5. The force and velocity at the load . 3: 3.3. Measuring equipment . 3· 3.3.1. The 'Fotonic sensor' ............................... 3· 3.3.2. The frequency deviation meter . 3· 3.4. Quality of a weld and the test method . 3· 3.5. Subsonic welding equipment . 3: 4. ULTRASONIC WELDING EXPERIMENTS AND RESULTS . 3' 4.1. The specimens . 3' 4.2. The development of a weld . 3' 4.2 .1. The breaking force in a tensile shear test as a function of welding time and vibrational amplitude ........... ; . 3: 4.2.1.1. The clamping force . 3: 4.2.1.2. Observations . 41 4.2.1.3. The breaking stress . 4: 4.2.1.4. Discussion . 4• 4.2 .2. The appearance of the welded interface . 4: 4.2.3. The microwelds .................................. 6: 4.2.3.1. Length of the microwelds as a function of vibrational amplitude and welding time . 6 4.2 .3 .2. Influence of surface conditions on weld formation . 7 4.3. The alternating force exerted on the workpieces . 7 4.3.1. Esperiments ...............·. .. 7 4.3.2. The area of real contact ............................ 7 4.4. The relative displacement between the welded surfaces . 7 4.4.1. Equipment and experiments . 8 4.4.2. Results and discussion . 8 4.4.3. Further experiments, results and conclusion . 8 5. SUBSONIC WELDING, EXPERIMENTS AND RESULTS .. 8 5.1. Parameters in subsonic welding .............................. 8 5 .2. Properties of subsonic welds . 9 5.3. The alternating tangential force during subsonic welding and the energy dissipation . 94 5 .4. Conclusions . 97 6. THE ULTRASONIC METAL WELDING PROCESS A MODEL, DIS- CUSSIONS AND CONCLUSIONS . 98 6.1. Outline of the model . 98 6.2. The model . 99 6.2.1. The area of real contact . 99 6.2.2. The microwelds .................................. 99 6.2.3. The number ofmicrowelds .......................... 101 6.2.4. The growth of the welded area ........................ 102 6.2.5. Determination of the fmal value of the tensile shear force Fb(oo) 103 6.2.6. Evaluation of the constant of the model K ................ 104 6.3. Verification of the model and discussion ....................... 105 6.3.1. The values of Fh(oo) and K .......................... 105 6.3.2. Agreement between the model and the experiments .......... 110 6.3.3. Discussion ..................................... 112 7. SUMMARY .......................................... 116 SAMENVATTING ...................................... 119 Appendices . ......... 122 Al. Acoustic softening and diffusion under the influence of ultrasound ...... 122 A2. Relation between adhesion and physical or chemical properties of metals .. 124 A3. Numerical data for calculation of the alternating force .............. 127 A4. Estimate of the inertial forces acting on the workpiece contacting the welding tip ........................................... 127 AS. Calculation of the energy dissipation in subsonic and ultrasonic welding ... 128 A6. Temperature in the welding zone .............. ,, ............. 129 A6.1. Temperature rise caused by a circular heat source in an infmite medium ....................................... 129 A6.2. Temperature flashes in ultrasonic aild subsonic welding ...· ..... 132 A6.3. Estimate of the temperature in the welding zone during ultrasonic welding ....................................... 133 REFERENCES ............................................ 137 LIST OF SYMBOLS a ratio ~/~s ......................................... (-) 2 a acceleration . (m s· ) 2 A area (cross section) . (m ) 2 An nominal area of contact . (m ) 2 Am area of a microweld . (m ) 2 Ar area of real contact . (m ) 2 A(t) welded area after welding timet . (m ) 2 A(oo) final value of the welded area . (m ) B weighted sum of characteristic impedance (see eq. 3.21) . (kg s -I) 1 c propagation velocity oflongitudinal waves . (m s· ) 1 1 c thermal capacity ............................... (J kg" °K" ) c capacitance of the transducer . (F) 2 c effective stress at 8 = 1 . (Nm " ) D diameter . (m) 3 E energy dissipation per unit volume per oscillation ............. (Jm- ) 2 E Young's modulus . (Nm" ) F force . (N) Fa alternating tangential force in subsonic welding . (N) Fa adhesion force . t'N) Fb(t) breaking force in the tensile-shear test, of a weld produced in t sec. (N) Fb(oo) final value of the breaking force . t'N) Fe clamping force . (N) Fl alternating force exerted on the load by the welding tip . (N) Fn force, normal to the plane of contact . (N) Fs force, tangential to the plane of contact . t'N) Fw alternating tangential force in the welded interface . (N) F(ft) error function . ( - ) 2 Hv Vickers hardness.
Load more

Recommended publications
  • SP-TRS-3278 Ultrasonic Welding Eastman Polymers
    Ultrasonic welding Eastman polymers Ultrasonic welding Ultrasonic welding is a common method for joining plastic parts without using adhesives, solvents, or mechanical fasteners. Ultrasonic welding equipment operates on the principle of converting electrical energy to mechanical vibratory energy. This vibratory energy is transmitted to plastic parts by a specially designed horn that also applies pressure to force the parts together. The high-frequency vibration generated by the welding apparatus creates frictional heat that softens the plastic to create a bond at contact points between plastic parts. Ultrasonic welding offers several advantages, including: Figure 1. Typical joint design* • Environmentally safe; no chemicals used • Aesthetically pleasing joints • Excellent product uniformity • Rapid bonding; higher productivity • Process adaptable to multiple tasks (inserting, swaging, etc.) • Low energy consumption • Computer-controlled process; suitable for statistical Textured Groove process control surface • Provides hermetic seals Some plastics soften and bond more easily than others, but by selecting the appropriate welding equipment and parameters, strong bonds can be obtained with most amorphous plastics. Parameters that significantly affect weld strength and appearance include vibration frequency and amplitude, horn pressure, weld time, and joint design. Step joint Joint designs Figure 2. Additional weld joint designs* There are multiple joint designs commonly used in the plastics industry, and the appropriate joint design should be utilized based on the application and product end use. A simple energy-director joint provides a small raised ridge of polymer between two flat surfaces to be joined. As the parts are pressed together by the vibrating welder horn, the ridge softens and flows over the width of the joint to create a bond.
    [Show full text]
  • Laser Beam Welding 37
    ORNL-TM-4133 Contract No. W-7405-eng-26 Information Division UNCONVENTIONAL WELDING PROCESSES: A BIBLIOGRAPHY Compiled by Ruth M. Stemple Y-12 Technical Library Oak Ridge National Laboratory -NOTICE This report was prepared as an account of work sponsored by the United States Government. Neither the United States nor the United States Atomic Energy Commission, nor any of their employees, nor any of their contractors, subcontractors, or their employees, MARCH 1973 makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, com- pleteness or usefulness of any information, apparatus, product or process disclosed, or represents that its use would not infringe privately owned rights. NOTICE This document contains information of a preliminary nature and was prepared primarily for internal use at the Oak Ridge National Laboratory, it is subject to revision or correction and therefore does not represent a final report". OAK RIDGE NATIONAL LABORATORY Oak Ridge, Tennessee 37830 operated by UNION CARBIDE CORPORATION for the U.S. ATOMIC ENERGY COMMISSION CONTENTS Introduction v Electron beam welding 1 Index 34 Laser beam welding 37 Index 44 Ultrasonic welding 46 Index 56 Friction welding 57 Index 62 iii INTRODUCTION The newer methods for welding have been termed "unconventional" to differentiate them from the older ones, and include electron beam, ultrasonic, laser beam, and friction welding. This bibliography brings together the world literature on these processes through 1971. A separate section is devoted to each process, and the arrangement is by author with an introduction and key-word index. When an article or paper is authored by more than three individuals, only the first is cited.
    [Show full text]
  • Ultrasonic Horns
    Principles and Applications of High Power Ultrasonics Karl Graff Ultrasonics Group 614.688.5269 [email protected] The Field of Ultrasonics High frequency ultrasonics High power ultrasonics What is High-Power Ultrasonics? HPU … application of intense, • Power supply high-frequency acoustic Ultrasonic energy to change materials, Transducer processes. 60 ~ Ultrasonic energy Transmission causes change in Material or Process Material/Process Outline … Ultrasonic vibrations and waves Vibrations Transducers and systems Physical effects of HPU x Applications of HPU Transducers Effects Applications US Vibrations & Waves HPU … application of • Power supply intense (i.e., high- Transducer power), high-frequency (i.e., ultrasonic) 60 ~ acoustic energy to create change in Transmission materials and processes. • Vibrations & Waves enter at every stage of HPU Material/Process Ultrasonic energy causes change in Material or Process Oscillator iωt Foe k x m Λm c x k ω = n m Teaches … • Natural frequency Timoshenko, S., Young, D.H. and Weaver, W. Jr., “Vibration Problems in Engineering,” • Resonance Fourth Edition, John Wiley & Sons, New York, 1974, Fig. 1.33. • High Q Equivalent Circuits F eiωt LR o I k m iωt C Voe c x (a) (b) F - force on the mass V - voltage applied to the circuit v - velocity of mass I - current in the circuit k - spring stiffness L - inductance m - mass R - resistance Longitudinal Vibrations Basic Vibration Concepts • Expansion/contraction nature of longitudinal vibrations Stress • Natural frequency • Nodes and antinodes • Amplitude, stress distribution • Wavelength - λ x c E cylinder-20khz.avi Node Antinode f = , c = (1 MB) 2l ρ Amplitude Steel, Al: c ≅5.1×103 m/ s λ/2 at 20 ×103Hz (20kHz) c 5.1×103 →l = = 2 f 2 ×20×103 =0.128 m =12.8cm ≅5in.
    [Show full text]
  • Welding Methods for Electrical Connections in Battery Systems
    TVE-Q; 19004/TVE-K; 19005 Examensarbete 15 hp Juni 2019 Welding methods for electrical connections in battery systems Harald Larsson, Alec Chamberlain, Sally Walin, Samir Schouri, Louise Nilsson, Elin Myrsell, Daniel Vasquez Abstract Welding methods for electrical connections in battery systems Harald Larsson, Alec Chamberlain, Sally Walin, Samir Schouri, Louise Nilsson, Elin Myrsell, Daniel Vasquez Teknisk- naturvetenskaplig fakultet UTH-enheten The demand for high energy battery assemblies is growing in sectors such as transportation. Along with it is the need for reliable, efficient and cost-effective ways Besöksadress: to electrically connect the batteries to ensure their performance. Battery cells are Ångströmlaboratoriet Lägerhyddsvägen 1 most often put into modules or packs when produced for electrically driven vehicles. Hus 4, Plan 0 The variable of greatest influence when welding battery packs is the contact resistance between the cell and the connection tab. It is crucial to minimize this Postadress: variable as much as possible to prevent energy loss in the form of heat generation. Box 536 751 21 Uppsala The purpose of this project is to conduct a comparative literature study of different Telefon: welding techniques for welding batteries. The compared techniques are resistance 018 – 471 30 03 spot welding, laser beam welding and ultrasonic welding. The performance was Telefax: evaluated in terms of numerous factors such as production cost, degree of 018 – 471 30 00 automation and weld quality. Hemsida: All three methods are tried and proven to function in the production of battery http://www.teknat.uu.se/student applications. Each method has separate strengths and limitations which makes them complement each other.
    [Show full text]
  • General Guidelines for Ultrasonic, Vibration and Spin Welding
    DUPONT PERFORMANCE POLYMERS Joint Design: A Critical Factor in Strong Bonds GENERAL GUIDELINES FOR ULTRASONIC, VIBRATION AND SPIN WELDING Introduction Welding techniques for assembling parts molded with DuPont thermoplastic resins conventionally require an input of energy that results in heat. This heat causes a brief melting of material at the interface of two parts to be joined. Simultaneous application of pressure produces a strong, homogenous bond. Techniques range from simple processes such as hot plate welding to electromagnetic/induction heating and laser welding. These techniques are used to join large or complex parts. Hot plate welding is seldom used with engineering plastics because of their higher melt temperatures and rapid solidification when heat is removed. Electromagnetic welding utilizes a magnetically “activated” thermoplastic in the joint interface which is heated by electromagnetic coils while under clamping pressure. (An induction welding variation uses metal inserts which are heated by the magnetic field.) Laser welding relies on the transmissive and absorptive characteristics of the materials to be welded. Because of the specialized nature of these methods, designers should contact their DuPont representative for specific application assistance. The methods covered in this overview, ultrasonic, vibration and spin welding, offer quick, precise and economical means of assembly. Each method requires close attention to joint design, holding and alignment fixtures, and material moisture. Safety Considerations Read the
    [Show full text]
  • Manufacturing Technology I Unit I Metal Casting
    MANUFACTURING TECHNOLOGY I UNIT I METAL CASTING PROCESSES Sand casting – Sand moulds - Type of patterns – Pattern materials – Pattern allowances – Types of Moulding sand – Properties – Core making – Methods of Sand testing – Moulding machines – Types of moulding machines - Melting furnaces – Working principle of Special casting processes – Shell – investment casting – Ceramic mould – Lost Wax process – Pressure die casting – Centrifugal casting – CO2 process – Sand Casting defects. UNIT II JOINING PROCESSES Fusion welding processes – Types of Gas welding – Equipments used – Flame characteristics – Filler and Flux materials - Arc welding equipments - Electrodes – Coating and specifications – Principles of Resistance welding – Spot/butt – Seam – Projection welding – Percusion welding – GS metal arc welding – Flux cored – Submerged arc welding – Electro slag welding – TIG welding – Principle and application of special welding processes – Plasma arc welding – Thermit welding – Electron beam welding – Friction welding – Diffusion welding – Weld defects – Brazing – Soldering process – Methods and process capabilities – Filler materials and fluxes – Types of Adhesive bonding. UNIT III BULK DEFORMATION PROCESSES Hot working and cold working of metals – Forging processes – Open impression and closed die forging – Characteristics of the process – Types of Forging Machines – Typical forging operations – Rolling of metals – Types of Rolling mills – Flat strip rolling – Shape rolling operations – Defects in rolled parts – Principle of rod and wire drawing – Tube drawing – Principles of Extrusion – Types of Extrusion – Hot and Cold extrusion – Equipments used. UNIT IV SHEET METAL PROCESSES Sheet metal characteristics – Typical shearing operations – Bending – Drawing operations – Stretch forming operations –– Formability of sheet metal – Test methods – Working principle and application of special forming processes – Hydro forming – Rubber pad forming – Metal spinning – Introduction to Explosive forming – Magnetic pulse forming – Peen forming – Super plastic forming.
    [Show full text]
  • Very High Power Ultrasonic Additive Manufacturing (Vhp Uam) for Advanced Materials K
    VERY HIGH POWER ULTRASONIC ADDITIVE MANUFACTURING (VHP UAM) FOR ADVANCED MATERIALS K. F. Graff, M. Short and M. Norfolk Edison Welding Institute, Columbus, OH 43221 Abstract To extend current ultrasonic additive manufacturing (UAM) to advanced materials, higher speeds and larger parts, it was essential to greatly increase the process ultrasonic power. EWI, with Solidica™, several industry, agency and academic partners, and support of Ohio’s Wright Program, have developed a “Very High Power Ultrasonic Additive Manufacturing System” that greatly extends current technology. A key part was the design of a 9.0 kW “push-pull” ultrasonic system able to produce sound welds in materials such as Ti 6-4, 316SS, 1100 Cu and Al7075. The VHP system can fabricate parts of up to 1.5m x 1.5m x 0.6m, with process and software developments that enable forming contoured surfaces. Introduction The process of ultrasonic additive manufacturing (UAM), introduced by Solidica™ in 2000, has shown significant promise for a wide range of applications, such as rapid prototyping, low volume tooling, direct parts manufacture, tailored materials, embedded fibers, smart materials, cladding and thermal management. Specific examples include injection mold dies, embedded channels for thermal management or chemical processing, and the embedding of materials, e.g. wires, tapes or meshes, within a metal matrix. In order to greatly extend the current technology to advanced materials, higher speeds and larger parts, it was essential to greatly increase the ultrasonic power applied to the process. Accordingly, EWI, with Solidica™, several industry, agency and academic partners, and the support of Ohio’s Wright Program, have developed a “Very High Power Ultrasonic Additive Manufacturing System” that will greatly extend current technology.
    [Show full text]
  • Introduction to Non-Arc Welding Processes
    Introduction to Non-Arc Welding Processes Module 2B Module 2 – Welding and Cutting Processes Introduction to Non-Arc Welding Processes Non-Arc Welding processes refer to a wide range of processes which produce a weld without the use of an electrical arc z High Energy Density Welding processes Main advantage – low heat input Main disadvantage – expensive equipment z Solid-State Welding processes Main advantage – good for dissimilar metal joints Main disadvantage – usually not ideal for high production z Resistance Welding processes Main advantage – fast welding times Main disadvantage – difficult to inspect 2-2 Module 2 – Welding and Cutting Processes Non-Arc Welding Introduction Introduction to Non-Arc Welding Processes Brazing and Soldering z Main advantage – minimal degradation to base metal properties z Main disadvantage – requirement for significant joint preparation Thermite Welding z Main advantage – extremely portable z Main disadvantage – significant set-up time Oxyfuel Gas Welding z Main advantage - portable, versatile, low cost equipment z Main disadvantage - very slow In general, most non-arc welding processes are conducive to original fabrication only, and not ideal choices for repair welding (with one exception being Thermite Welding) 2-3 High Energy Density (HED) Welding Module 2B.1 Module 2 – Welding and Cutting Processes High Energy Density Welding Types of HED Welding Electron Beam Welding z Process details z Equipment z Safety Laser Welding z Process details z Different types of lasers and equipment z Comparison
    [Show full text]
  • M Odeling and Process Control of Ultrasonic W Elding of Plastics
    Order Number 9307773 Modeling and process control of ultrasonic welding of plastics He, Fugui, Ph.D. The Ohio State University, 1992 U M I 300 N. Zeeb Rd. Ann Arbor, MI 48106 MODELING AND PROCESS CONTROL OF ULTRASONIC WELDING OF PLASTICS DISSERTATION Presented in Partial Fulfillment of Requirement for the Degree Doctor of Philosophy in the Graduate School of The Ohio state University By Fugui He, B.S., M.S. ***** The Ohio State University 1992 Dissertation Committee: Approved by Avraham Bern tar Chon-Liang Tsai fafaJuwn Adviser Ming J Liou Department of Welding Engineering To My mother-in-law Yude ACKNOWLEDGMENTS I wish to express my sincere appreciation to Dr. Avraham Benatar for his guidance as an advisor and his help as a friend. He is one of those who has played a key role in ray life. I once said to him: "I have to thank you, because it is you who has forced me to enter the new fields of electronic circuit, data processing, and automatic control which I wasn't previously familiar with but which have proven to be more them useful in ray engineering career." My thanks goes to professor Chon-Liang Tsai and professor Ming Liou who have served as committee members of both ray qualifying and general examinations. Professor Tsai especially provided me with advice of a wide range both academically and personally during the last five years. My thanks also goes to professor L. Adler who was ray advisor of the master program in the NDE field. I thank Branson Ultrasonics Corporation that sponsored the project.
    [Show full text]
  • Introduction to Welding Process
    Introduction to welding process Introduction Welding is a process in which two or more parts are joined permanently at their touching surfaces by a suitable application of heat and/or pressure. Often a filler material is added to facilitate coalescence. The assembled parts that are joined by welding are called a weldment. Welding is primarily used in metal parts and their alloys. Welding processes are classified into two major groups: 1. Fusion welding: In this process, base metal is melted by means of heat. Often, in fusion welding operations, a filler metal is added to the molten pool to facilitate the process and provide bulk and strength to the joint. Commonly used fusion welding processes are: arc welding, resistance welding, oxyfuel welding, electron beam welding and laser beam welding. 2. Solid-state welding: In this process, joining of parts takes place by application of pressure alone or a combination of heat and pressure. No filler metal is used. Commonly used solid-state welding processes are: diffusion welding, friction welding, ultrasonic welding. Arc welding and similar processes Arc welding is a method of permanently joining two or more metal parts. It consists of combination of different welding processes wherein coalescence is produced by heating with an electric arc, (mostly without the application of pressure) and with or without the use of filler metals depending upon the base plate thickness. A homogeneous joint is achieved by melting and fusing the adjacent portions of the separate parts. The final welded joint has unit strength approximately equal to that of the base material. The arc temperature is maintained approximately 4400°C.
    [Show full text]
  • Ultrasonic Welding
    Ultrasonic Assembly Process In Ultrasonic welding, high frequency sound energy is used to bring the joining surfaces of two thermoplastic parts to a molten state where they can be permanently welded together. 1. The horn, under pressure from the assembly stand, contacts one of the two mated plastic parts. 2. Vibrational energy from the horn causes the contacted plastic part to vibrate against its mate. 3. The mechanical vibration of one part against the second causes frictional heat, which melts the plastic parts at their interface and allows the two surfaces to molecularly fuse together. 4. After a short cooling time, a permanent, homogeneous weld results. Ultrasonic Weld Types Near Field Weld (Direct): Refers to a weld where the contact surface of the horn is 1/4" or less away from the joint surface. It is important that the horn fits exactly the contour of the part to be welded. Far Field Weld (Indirect): The distance between the contact surface of the horn and weld between the contact surface of the horn and weld joint is more the 1/4". Ultrasonic energy is transmitted through the upper portion of the part to the joint surface. Weldability in Ultrasonics Factors Influencing Weldability in Ultrasonics • Amorphous vs. Semi-crystalline resins • Moisture content • Pigments • Resin grade • Mold release agents • Lubricants • Plasticizers • Fillers Ultrasonic Weldability of Plastics EASE OF EASY MEDIUM COMPLEX DIFFICULT WELDING PPO Polyamide/Nylon 6 Polystyrene/PS Polycarbonate/PC PC-PBT Blends Polyamide/Nylon 6/6 Acrylic PC-ABS Blends Polyester
    [Show full text]
  • Fabrication of Multi-Material Structures Using Ultrasonic Consolidation and Laser-Engineered Net Shaping
    Utah State University DigitalCommons@USU All Graduate Theses and Dissertations Graduate Studies 12-2010 Fabrication of Multi-Material Structures Using Ultrasonic Consolidation and Laser-Engineered Net Shaping John Olorunshola Obielodan Utah State University Follow this and additional works at: https://digitalcommons.usu.edu/etd Part of the Mechanical Engineering Commons Recommended Citation Obielodan, John Olorunshola, "Fabrication of Multi-Material Structures Using Ultrasonic Consolidation and Laser-Engineered Net Shaping" (2010). All Graduate Theses and Dissertations. 776. https://digitalcommons.usu.edu/etd/776 This Dissertation is brought to you for free and open access by the Graduate Studies at DigitalCommons@USU. It has been accepted for inclusion in All Graduate Theses and Dissertations by an authorized administrator of DigitalCommons@USU. For more information, please contact [email protected]. FABRICATION OF MULTI-MATERIAL STRUCTURES USING ULTRASONIC CONSOLIDATION AND LASER-ENGINEERED NET SHAPING by John Olorunshola Obielodan A dissertation submitted in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY in Mechanical Engineering Approved: _____________________ _____________________ Dr. Brent Stucker Dr. Thomas Fronk Major Professor Committee Member _____________________ _____________________ Dr. Leijun Li Dr. Yibin Xue Committee Member Committee Member _____________________ _____________________ Dr. Randy Jost Dr. Byron R. Burnham Committee Member Dean of Graduate Studies UTAH STATE UNIVERSITY Logan, Utah 2010 ii Copyright © John Olorunshola Obielodan 2010 All Rights Reserved iii ABSTRACT Fabrication of Multi-material Structures Using Ultrasonic Consolidation and Laser-Engineered Net Shaping by John Olorunshola Obielodan, Doctor of Philosophy Utah State University, 2010 Major Professor: Dr. Brent E. Stucker Department: Mechanical and Aerospace Engineering This research explores the use of two additive manufacturing processes for the fabrication of multi-material structures.
    [Show full text]