Brief Product Description Book 17Th Edition — USA
Total Page:16
File Type:pdf, Size:1020Kb
Brief product description book 17th Edition — USA Brief product description book 17th Edition — USA 22777 Springwoods Village Pkwy. Spring, TX 77389 www.exxonmobil.com © 2017 Exxon Mobil Corporation Due to continual product research and development, the information contained herein is subject to change without notification. INTRODUCTION The primary intent of this publication is to provide a field reference for our core branded product offering of lubricating oils, greases and coolants. This guide provides specific product information in a format that is intended to assist in the selection of the right product for your application. The BRIEF PRODUCT DESCRIPTION BOOK is organized into six sections— Industrial, Commercial Vehicle, Passenger Vehicle, Marine, Aviation and Grease. Within each of these six sections, products are divided into application groups. An outline of these groups and their respective products is provided at the beginning of each of the six sections. An alphabetical list of applications is provided up front and an alphabetical index of products is located at the end. An appendix also provides other reference information. All products may NOT be available locally. Due to continual product research and development, the information contained herein is subject to change without notification. “Typical Properties” may vary and are typical of those obtained with normal product tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. For additional and/or more current information about our products, refer to the online product data sheets at mobil.com/pds. The Technical Support Center at 1-800-662- 4525 or your local ExxonMobil representative can also provide assistance. Many petroleum products pose potential human health, safety, and environmental hazards. We strongly urge you to read the following general precautions thoroughly and reference the appropriate Safety Data Sheets. All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries. 1 Please refer to mobil.com/pds for latest product information TABLE OF CONTENTS INTRODUCTION ...........................................................................................................................................................................1 HEALTH AND SAFETY PRECAUTIONS ............................................................................................................................ 3-5 SAFETY DATA SHEETS (SDS) ...................................................................................................................................................6 SUSTAINABILITY IN MOTION .................................................................................................................................................7 APPLICATION INDEX OF PRODUCTS .............................................................................................................................. 8-9 ENERGY EFFICIENCY ............................................................................................................................................................... 10 MOBIL SHC™ GENERAL RECOMMENDATIONS ..............................................................................................................11 BRIEF PRODUCT DESCRIPTIONS .................................................................................................................................. 12-95 APPENDICES ......................................................................................................................................................................96-104 ANSI-AGMA Industrial Gear Lubricants 9005-D94 ..................................................................................................... 96 Viscosity Conversion Table ................................................................................................................................................. 97 Degrees API Corresponding to Specific Gravities......................................................................................................... 97 ISO Viscosity Classification System .................................................................................................................................. 98 Grease Consistency Classification .................................................................................................................................... 98 ISO 4406 – Oil Cleanliness by Particle Counting .......................................................................................................... 99 SAE Viscosity Grades For Engine Oils ...........................................................................................................................100 SAE Viscosity Grades For Gear Oils ...............................................................................................................................100 Temperature Conversion Table ...............................................................................................................................101-102 Mobil Serv Lubricant Analysis .........................................................................................................................................103 Manufacture Interpretation Key ......................................................................................................................................104 ALPHABETICAL INDEX OF PRODUCTS ................................................................................................................. 105-109 VISCOSITY CLASSIFICATION EQUIVALENTS ................................................................................................................111 QUESTIONS? CALL THE EXXONMOBIL TECHNICAL SUPPORT CENTER AT 1-800-662-4525 mobil.com/industrial | mobildelvac.com | mobil.com Please refer to mobil.com/pds for latest product information 2 HEALTH AND SAFETY PRECAUTIONS The health and safety of people who handle and use our products are of vital interest and concern to us. Most ExxonMobil products are regarded as generally safe. As with all petroleum products, however, excessive and prolonged contact or improper handling may result in adverse effects. Below are general health and safety precautions for handling petroleum products. For more details and product-specific information, we urge you to obtain and read carefully the Material Safety Data Sheet (SDS) for each product handled to ensure that employees and users fully understand appropriate precautionary information relating to safe use. Safety Data Sheets are available on the web at www.sds.exxonmobil.com, by calling Fax-on-Demand at 1 -713-613-3661, or by contacting your local representative. ExxonMobil 24-Hour Emergency Line (Call Collect): 1-609-737-4411 in the U.S. FIRE HAZARDS Many petroleum products are highly volatile and flammable and must be handled with extreme caution to prevent fire or explosion. These include a few extra light viscosity lubricants and many solvents. The federal Occupational Safety and Health Administration (OSHA) has classified products with flash points below 37.8°C (100°F) as “flammable,” and products with flash points at or above 37.8°C and below 93.3°C (200°F) “combustible.” Products with flash points above 93.3°C (200°F), when used for their intended purposes, are not classified as fire hazards in accordance with OSHA (29 CFR 1910.1200). Petroleum products should not be stored or handled near sources of ignition, such as heat, sparks, open flame, sources of static elec tricity, or near strong oxidants such as chlorine (including swimming pool chemicals) and concentrated oxygen. WARNING: “Empty” containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition which may cause them to explode. Do not attempt to clean since residue is difficult to remove, and even a trace of remaining material constitutes an explo sive hazard. “Empty” drums should be completely drained, properly bunged, and promptly returned to a drum reconditioner. All other con tainers should be disposed of in an environmentally safe manner and in accordance with governmental regulations. 3 Please refer to mobil.com/pds for latest product information HEALTH AND SAFETY PRECAUTIONS CONTINUED Health studies have shown that many petroleum hydrocarbons pose potential human health risks that may vary from person to person. As a precaution, exposure to liquids, vapors, and mists of petroleum prod ucts should be minimized. Inhalation—Health specialists have established maximum concen tration levels for hydrocarbon vapors in air to which nearly all workers may be safely exposed. Where applicable, the levels established for ExxonMobil products are indicated in Safety Data Sheets. Prolonged breathing of hydrocarbon vapor concentrations in excess of prescribed limits may result in light-headedness, dizziness, and nausea. Inhala tion of higher vapor concentrations may produce dizziness, headache, respiratory tract irritation, and unconsciousness. If a person is overcome by vapor, remove the individual from expo sure at once and call a physician. If breathing is irregular or has stopped, start resuscitation and administer oxygen, if available. To avoid inhalation of excessive concentrations