DA329 USB 3.0 to Dual HDMI Display Adapter
Total Page:16
File Type:pdf, Size:1020Kb
Features Windows 10 Setup Important Note 1. Click the icon in the lower left corner of the desktop • Please install DisplayLink® driver prior to use this product • Turns one USB port into two extended mode HDMI outputs • Latest drive download from product page at • Significantly increase productivity by adding two extended screens 2. Click "Settings " in the pop-up menu. www.simplecom.com.au or www.displaylink.com/downloads • USB 3.0 interface, backwards compatible with USB 2.0 3. Click "System " in the pop-up menu and the DA329 USB 3.0 to Dual HDMI • Two HDMI ports support Full HD resolutions up to 1080p@60Hz following menu will pop up: Display Adapter • The DisplayLink® software driver is inboxed in Chrome OS • With 3.5mm stereo output for easy connection to headphones from build R51 (released in June 2016). All Chromebooks using • Built-in discrete graphic processor and works for most computers Chrome OS build R51 or later will work with DisplayLink docks • Powered by USB, no external power required and adapters without additional driver installation. • Compatible with Windows, MacOS and Chrome OS • This product does not support Windows XP and Windows Vista • After connected 3.5mm stereo output port, there will be no Specications sound output from two HDMI ports. • The output HDMI cable cannot exceed 5 meters, please use • Interface: USB 3.0 Type A high-quality HDMI cable for stable connection. • Compatible USB version: USB2.0, USB3.0 (USB3.1 Gen 1) • Output resolution: Up to 1920x1080 @60Hz • Output cable distance: < 5m (AWG26 HDMI cable) 4. You can use the mouse to drag the three monitor icons in the red frame to adjust their position. • Material: ABS Connection Chart 5. You can select the options in “Multiple Displays” to set mirror • Operation Temperature: - 15 to + 55°C or extended modes. And you can also select any one of them as • Dimension: 83mm x 59mm x 24mm the main display. • Cable length: 50 cm • Weight: 60g Desktop HDMI A • System support: Windows 7 and above, MacOS 10.6 and above, Chrome OS Laptop Speaker/Headphones HDMI B 6. Right-click the DisplayLink Manager icon on the bottom 5. Click the "System Preferences "icon at the bottom of the right of the desktop, and select "Audio Settings" in the pop-up Warranty tab. Select "aoeyoo USB audio" in the pop-up tab, and click OK. desktop. 1 Year limited Warranty. Our goods come with guarantees that 6. Click the "Sound "icon in the pop-up tab. cannot be excluded under the Australian Consumer Law. You are 7. Select "aoeyoo USB audio" in the pop-up tab entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For our assistance with regards to warranty please email to [email protected] or create a support ticket at http://www.simplecom.com.au MacOS Setup 1. Click the "System Preferences "icon at the bottom of the desktop. 2. Click the" Display " icon in the pop-up menu. © Simplecom Australia All Rights Reserved. Simplecom is a registered trademark of Simplecom Australia Pty Ltd. 3. In the pop-up menu, select "Arrangement". DisplayLink® is the registered trademark of DisplayLink Corp. in the EU, the US, and other countries. All other trademarks are property of their respective owner. Note: If this tab does not appear, please check whether the driver Specifications and external appearance are subject to change without version matches your system and ensure that the installation is notice. Warranty and technical support covering this product are only complete; please check whether the adapter is properly 4. You can use the mouse to drag the three monitor icons in the red valid in the country or region of purchase. connected to the computer and TV. frame to adjust their arrangement. And you can also select the mirror mode here..