DOCSLIB.ORG

Thermoplastic Rod Manufacturer

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Thermoplastic Rod Manufacturer ABCD EFGH 1 2 Thermoplastic Rod Manufacturer New Image Plastics Mfg is a leading global producer of advanced specialty welding rod and welding profiles. 3 We offer Virgin high performance polymers, formulations & chemical additives to serve a broad range of applications. Our products are used in major markets, including consumer specialties, industrial, commercial, construction, food, medical and more. Customers rely on our technical expertise to improve their products, lower their cost 4 and provide real-time solutions. On time deliveries and top notch void free products you can always rely on. Real time quality control charts, Required ISO paperwork, manufacturer certifications are available. Let our capable export team handle all of your overseas requirements. 5 TimeTime TT ested ested ExperienceExperience TimeTime TT ested ested WeldsWelds 6 7 • 5 lb. Coils 8 • 10 lb. Coils • 10 lb. Spools • 30 lb. Spools NN Thermoplastic Types Extruded Or any length you require (PA) Polyamides Nylon (6)(6.6)(11) II 9 (CA) Cellulose Acetate (LDPE) Low Density Polyethylene (CAB) Cellulose Acetate Butyrate (LLDPE) Linerar Low Density Polyethylene (PETG) Polyethylene Terephthalate- PP (PVC) Polyvinyl Chloride (ULLDPE) Ultra low Density Polyethylene Glycol Modified (HDPE) High Density Polyethylene (MDPE) Medium Density Polyethylene (ABS) Acrylonitrile Butadiene Styrene MM (HMW) High Molecular Weight Polyethylene (HPP) Homopolypropylene (HIPS) High Impact Polystyrene (UHMW) Ultra High Molecular Weight (CPP) Copolypropylene (FPVC) Flexible PVC (PVDF) Polyvinylidene Fluoride 10 Polyethylene (TPU) Thermoplastic Urethane New Image Plastics Contact us at: www.newimageplastics.com Voice: (330) 854-3010 2411 South Locust St. Fax: (330) 854-6770 Canal Fulton, OH 44614 Email: [email protected] 11 Thermoplastic Extrusion 6.00 1506 .25 Products & Services 1.50 .25 Embedment .25 TYP Channel Thermoplastic Extrusion Products and Services .38 * Custom Grinding 6.13 * Blanket Ordering 1/4 3/16 5/32 1/8 .235 * Welding Triangle Shapes .245 .175 Triangle .187 .145 .157 .110 * .020 Micro Rod Rod .125 1 *1/2 Extruded Rod .365 - .375 .250 - .260 .215 - .225 .175 - .185 * Custom Profiles .160 * Bar Stock Shapes Custom Dies Available .170 .110 Dual #10 .125 #9 Electrode * Double-Bar Rod * Cap Strip / Ribbon Strip .226 - .236 .165 - .175 Mouldings .110 * Custom Colors / Color Matching Starting Round Half Round Strip at 2mm .125 * Hot Plate/Extrusion/Hand Welding .550 - .600 * In-Line Embossing * Drilling, Punching, Cutting ABS acrylonitrile-butadiene-styrene PBT polybutylene terephthalate = PTMT * Part Assembly ASA acrylate-styrene-acrylonitrile PC polycarbonate ATH aluminium trihydrate PE polyethylene * Post Extrusion Operations BDS butadiene-styrene block copolymer PEBA polyether block amide BMC bulk moulding compound PEEK polyetheretherketone * Game Pieces & Specialty Rods BOPP biaxially oriented polypropylene PEEL polyester elastomer * Specialty Compound Extrusions BR butadiene rubber PEI polyester imide CA cellulose acetate PEK polyetherketone * Engineered Resin Extrusions CAB cellulose acetate-butyrate PES polyether sulphone CAP celluse acetate propionate PETP polyethylene terephthalate * New Product Development CE cellulose PETG PET copolymer CMC carboxymethyl celluse PF phenol formaldehyde * Member Society of Plastics Engineers CN cellulose nitrate PFA perfluoro alkoxyl alkane * Statistical Process Control Certified CP cellulose propionate PHB polyhydroxybutyrate CSM chopped strand mat (or) PI polyimide * Over 32 Years of Combined Experience chlorosulphonated polyethylene (rubber) PIR polyisocyanurate rigid (foam) DMC dough moulding compound PMMA polymethyl methacrylate * Prototypes / Tooling Development TPX polymethyl pentene copolymer PMP polymethyl pentene * Design & Production UHMWPE ultra high molecular weight PE POM polyoxymethylene VCM vinyl chloride monomer = VC PP polypropylene * Process Development & Material Selection ECTFE ethylene chlorotrifluoro ethylene copolymer PPE polyphenylene ether EPDM ethylene-propylene-diene monomer (elastomer) PPO polyphenylene oxide EPM ethylene-propylene rubber = EPR PPS polyphenylene sulphide Extrusion Welding Rods and Strips EPR ethylene-propylene rubber = EPM PPSS polyphenylene sulphide sulphone EPS expanded polystyrene PS polystyrene * Thermoplastic Rod Stock Shapes EVA ethylene vinyl acetate PSU polysulphone EVOH ethylene vinyle achol PTFE polytetrafluoroethylene * On Time Deliveries FEP fluorinated ethylene-propylene PTMT polytetramethylene terephthalate = PBT FRP fibre reinforced polyester/plastics PUR polyurethane * Mouldings GMT glass mat thermoplastic PVA polyvinyl acetate * Flexible Extrusions GPPS general purpose polystyrene PVB polyvinyl butytral (butyrate) GRP glass reinforced plastic PVC polyvinyl chloride * Industrial /Commercial Floor Seaming Rod HDPE high density polyethylene PVCC chlorinated polyvinyl chloride HEMA hydroxyethyl methacrylate polymer PVCP polyvinyl chloride plasticised HIPS high impact polystyrene = TPS PVCU polyvinyl chloride unplasticised LCP liquid crystal polymer = SRP PVDC polyvinylidene chloride LDPE low density polyethylene PVDF polyvinylidene flouride Estimated Yield Guide LLDPE linear low density polyethylene PVF polyvinylflouride Choose from MBS methacrylate-butadiene-styrene terpolymer PVOH polyvinyl alcohol 1/8 5/32 3/16 • 5 lb Coils MDPE medium density polyethylene SAN styrene acrylonitrile (copolymer) PVC 135 90 62 • 10 lb Coils MF melamine formaldehyde SBR styrene butadiene rubber CPVC 115 75 52 • 10 lb Spools NBR nitrile rubber = acrylonitrile butadiene rubber SBS styrene-butadiene-styrene (block copolymer) HDPE 200 130 88 NR natural rubber SEBS styrene-ethylene-butadiene-styrene • 30 lb Spools OPP oriented polypropylene SIS styrene-isoprene-styrene LDPE 200 130 88 Or any length you require PA polyamide = nylon SMA styrene maleic anhydride LLDPE 200 130 88 PAA polaryl amide SMC sheet moulding compond HPP 210 135 90 PA 6 nylon 6 SRP self reinforcing polymer = LCP CPP 210 135 90 PA 66 nylon 66 TPE thermoplastic elastomer PA 46 nylon 46 TPO thermoplastic olefin (rubber) PVDF 100 66 45 PA 610 nylon 610 TPR thermoplatic rubber PETG 140 92 62 PA 66/610 nylon 66/610 copolymer TPS toughened polystyrene = HIPS PU 165 110 77 PA 11 nylon 11 TPU thermoplastic polyurethane (rubber) = TPUR ABS 180 115 80 PA 12 nylon 12 TPUR thermoplastic polyurethane (rubber) = TPU PAI polyamide imide UF urea formaldehyde Nylon 150 PAN polyacrylonitrile VC vinyl chloride = VCM PB polybutylene XLPE cross-linked polyethylene Contact Us At: www.newimageplastics.com Voice: (330) 854-3010 Fax: (330) 854-6770 2411 South Locust St. • Canal Fulton, OH 44614 Email: [email protected] 5/05.
Load more

Recommended publications
  • A Review of Restrictions and PVC Free Policies Worldwide
    PVC-Free Future: A Review of Restrictions and PVC free Policies Worldwide A list compiled by Greenpeace International 9th edition, June 2003 © Greenpeace International, June 2003 Keizersgracht 176 1016 DW Amsterdam The Netherlands Tel: +31 20 523 6222 Fax: +31 20 523 6200 Web site: www.greenpeace.org/~toxics If your organisation has restricted the use of Chlorine/PVC or has a Chlorine/PVC-free policy and you would like to be included on this list, please send details to the Greenpeace International Toxics Campaign 1 Contents 1. Political......................................................................................................................... 4 1.1 International Agreements on Hazardous Substances............................. 4 Mediterranean........................................................................................................... 4 North-East Atlantic (OSPAR & North Sea Conference)..................................... 4 International Joint Commission - USA/Canada................................................... 6 United Nations Council on Environment and Development (UNCED)............ 7 United Nations Environment Programme (UNEP).............................................. 7 UNEP – global action on Persistent Organic Pollutants..................................... 7 UNIDO........................................................................................................................ 8 1.2 National PVC & Chlorine Restrictions and Other Initiatives: A-Z.......10 Argentina..................................................................................................................10
    [Show full text]
  • Additives for Polyolefins: Getting the Most out of Polypropylene
    ADDITIVES FOR POLYOLEFINS PLASTICS DESIGN LIBRARY (PDL) PDL HANDBOOK SERIES Series Editor: Sina Ebnesajjad, PhD ([email protected]) President, FluoroConsultants Group, LLC Chadds Ford, PA, USA www.FluoroConsultants.com The PDL Handbook Series is aimed at a wide range of engineers and other professionals working in the plastics indus- try, and related sectors using plastics and adhesives. PDL is a series of data books, reference works, and practical guides covering plastics engineering, applications, proces- sing, and manufacturing, and applied aspects of polymer science, elastomers, and adhesives. Recent titles in the series Biopolymers: Processing and Products, Michael Niaounakis (ISBN: 9780323266987) Biopolymers: Reuse, Recycling, and Disposal, Michael Niaounakis (ISBN: 9781455731459) Carbon Nanotube Reinforced Composites, Marcio Loos (ISBN: 9781455731954) Extrusion, 2e, John Wagner and Eldridge Mount (ISBN: 9781437734812) Fluoroplastics, Volume 1, 2e, Sina Ebnesajjad (ISBN: 9781455731992) Handbook of Biopolymers and Biodegradable Plastics, Sina Ebnesajjad (ISBN: 9781455728343) Handbook of Molded Part Shrinkage and Warpage, Jerry Fischer (ISBN: 9781455725977) Handbook of Polymer Applications in Medicine and Medical Devices, Kayvon Modjarrad and Sina Ebnesajjad (ISBN: 9780323228053) Handbook of Thermoplastic Elastomers, Jiri G. Drobny (ISBN: 9780323221368) Handbook of Thermoset Plastics, 2e, Hanna Dodiuk and Sidney Goodman (ISBN: 9781455731077) High Performance Polymers, 2e, Johannes Karl Fink (ISBN: 9780323312226) Introduction
    [Show full text]
  • Elastomeric Materials
    ELASTOMERIC MATERIALS TAMPERE UNIVERSITY OF TECHNOLOGY THE LABORATORY OF PLASTICS AND ELASTOMER TECHNOLOGY Kalle Hanhi, Minna Poikelispää, Hanna-Mari Tirilä Summary On this course the students will get the basic information on different grades of rubber and thermoelasts. The chapters focus on the following subjects: - Introduction - Rubber types - Rubber blends - Thermoplastic elastomers - Processing - Design of elastomeric products - Recycling and reuse of elastomeric materials The first chapter introduces shortly the history of rubbers. In addition, it cover definitions, manufacturing of rubbers and general properties of elastomers. In this chapter students get grounds to continue the studying. The second chapter focus on different grades of elastomers. It describes the structure, properties and application of the most common used rubbers. Some special rubbers are also covered. The most important rubber type is natural rubber; other generally used rubbers are polyisoprene rubber, which is synthetic version of NR, and styrene-butadiene rubber, which is the most important sort of synthetic rubber. Rubbers always contain some additives. The following chapter introduces the additives used in rubbers and some common receipts of rubber. The important chapter is Thermoplastic elastomers. Thermoplastic elastomers are a polymer group whose main properties are elasticity and easy processability. This chapter introduces the groups of thermoplastic elastomers and their properties. It also compares the properties of different thermoplastic elastomers. The chapter Processing give a short survey to a processing of rubbers and thermoplastic elastomers. The following chapter covers design of elastomeric products. It gives the most important criteria in choosing an elastomer. In addition, dimensioning and shaping of elastomeric product are discussed The last chapter Recycling and reuse of elastomeric materials introduces recycling methods.
    [Show full text]
  • Thermoplastic Olefin Copolymers and Blends Thereof
    iiililiili^ @ EuroPean Patent Office ^-S Office europeen des brevets (fi) Publication number : 0 661 333 A2 @ EUROPEAN PATENT APPLICATION @ Application number : 94308461.6 © Int. CI.6: C08G 81/02, C08L 71/12, C08L 53/00, C08L 81/02 (22) Date of filing : 16.11.94 © Priority : 02.12.93 US 160133 @ Inventor : Khouri, Farid Fouad 6 Tamarack Lane Drive Clifton Park, New York 12065 (US) @ Date of publication of application : Inventor : Stoddard, Gregory James 05.07.95 Bulletin 95/27 10 N Helderbeg PKY Slingerlands, NJ 12159-9258 (US) @ Designated Contracting States : DE ES FR GB IT NL © Representative : Pratt, Richard Wilson et al London Patent Operation G.E. Technical Services Co. Inc. foM^c"0"8^* © Applicant : GENERAL ELECTRIC COMPANY * 1 River Road 12/13 Essex Street Schenectady, NY 12345 (US) London WC2R 3AA <GB> © Thermoplastic olefin copolymers and blends thereof. (57) Novel thermoplastic olefin copolymers and blends comprising the same are prepared from precursor fu notional ized olefin polymers and functional ized addition polymers. Additionally, the thermoplastic olefin copolymers comprise ester linkages and sulfide linkages. CM < CO CO CO <o CO LU Jouve, 18, rue Saint-Denis, 75001 PARIS EP 0 661 333 A2 Field of the Invention This invention relates to novel thermoplastic olefin copolymers and blends comprising the same. Partic- ularly, said thermoplastic olefin copolymers are prepared from precursor functionalized olefin polymers and 5 functionalized addition polymers under reactive conditions. Background of the Invention Plastics are conventionally divided into two distinct and important groups: thermoplastics and thermoset- 10 ting materials. Thermoplastics are those which melt to become viscous liquids when heated and solids when cooled.
    [Show full text]
  • THERMOPLASTIC ELASTOMER BLENDS (October 1993)
    Abstract Process Economics Program Report No. 175C THERMOPLASTIC ELASTOMER BLENDS (October 1993) Thermoplastic elastomers are polymers that combine the flexibility and impact resistance of thermoset rubbers with the strength and convenient processibility of thermoplastics. This unique combination of properties is a result of the two-phase morphology of these materials. One means of preparing thermoplastic elastomers is to blend a thermoplastic with an elastomer. In this report SRI examines the technology of thermoplastic/elastomer blends, particularly blends derived from polypropylene, polyvinyl chloride, or thermoplastic polyurethane. This report contains an evaluation of a process known as dynamic vulcanization, which is one method of preparing thermoplastic elastomers with a preferred two-phase morphology. We also compare the economics for preparing thermoplastic polyolefin elastomers (TPOs) using dynamic vulcanization with the economics for preparing TPOs by the new in-reactor polymerization process. For those in the thermoplastic elastomers business, this report will be useful for its extensive review of recently published literature and the comparative economics. Users of thermoplastic elastomers will also find it useful for understanding the underlying principles of the product technology. We summarize and evaluate over 200 pertinent patents. PEP’92 GMB CONTENTS GLOSSARY xiii 1 INTRODUCTION 1-1 2 SUMMARY 2-1 GENERAL ASPECTS OF TPE BLENDS 2-1 Polypropylene Blends 2-1 Polyvinyl Chloride Compounds and Blends 2-2 Thermoplastic Polyurethane
    [Show full text]
  • 20. Choosing Additives for Sustainability
    20 Choosing Additives for Sustainability The conclusion of this book relates to a topic about 20.1 Factors That Make which the entire plastics industry and all end users of Polyolefins Sustainable plastic resins and products are being challenged to confront and address: the sustainability of plastic In a broad view of sustainability, polyolefins materials. could be credited with sustainable characteristics of With the polyolefins, polyethylene (PE) and various kinds, in comparison to those of alternative polypropylene (PP), being by far the most visible materials that might be used for similar products. polymers in everyday life, and especially because Although associated with waste and littering in the they are used so often for “single use” packaging, public discourse, their production, use, and end of readers who use polyolefins cannot avoid ques- life do have some positive “green” aspects: tions about the “green’” nature of the materials— whether the arguments emphasize the materials’ 1. PE and PP are based on relatively simple recyclability (as opposed to their being often lit- molecules, and the energy used in their tered) or their efficient production and uses (when production is relatively low compared to compared with alternative materials such as paper, other polymers. And when considering a metal, or glass). common application like shopping bags, their Considering their property changing roles, addi- production energy is low in comparison with tives are important factors in arguments about what alternatives like paper bags. makes a polyolefin material or application sustain- 2. Polyolefins, especially when compounded to able.Theargumentshavetodowiththeireffectson be durable using additives, offer energy and the materials’ production, use, recycling, and disposal material savings in use.
    [Show full text]
  • Ethylene-Propylene Copolymers: Some Aspects of Thermal- and Photo-Degradation and Stabiiization R
    REVIEWS Ethylene-Propylene Copolymers: Some Aspects of Thermal- and Photo-degradation and StabiIization R. Mani, R.P. Singh and S. Sivaram ____________ Ethylene-propylene (EP) copolymers exhibit diverse ber-like elasticity and high elongation upon deformation, degradation behaviour under the influence of heat and with an ethylene content typically in the range of light. This paper briefly reviews some aspects ofthermal­ 55-65 mol %. and photo-degradation and stabilization of EP copoly­ Thermoplastic olefin elastomers (TPO) are a class of mers. The chemical and mechanistic aspects of degra­ polyolefins that possess the processing advantages of dation are emphasized. This understanding is especially thermoplastics combined with the physical properties critical in multiphase polymers such as high-impact of chemically vulcanized elastomers. One of the heterophasic copolymers, thermoplastic elastomers and most important commercial TPO is the blend of blends. Aspects of stabilization relevant to EP copoly­ ethylene-propylene-diene monomer rubber (EPDM) mers, with special reference to hindered-amine light with polypropylene (PP) under conditions where EPDM stabilizers, are discussed. undergoes crosslinking through the diene moietl. These materials have an interpenetrating network (IPN) The diversity of structural variants in polyolefins that one morphology (dual phase continuity)5. can obtain by the use of two inexpensive monomers, Typical physical and mechanical properties of differ­ namely, ethylene and propylene, through the use of ent types of olefin copolymers based on ethylene and Ziegler-Natta catalysts and polymerization processes has propylene are given in Table 2. Random EP copolymers considerably expanded in recent years. These materials containing less than 6 mol % ethylene, are relatively soft span the full range of polymeric properties, from soft materials with low melting points.
    [Show full text]
  • A Guide to Polyolefin Extrusion Coating 6664.Pdf
    A GUIDE TO POLYOLEFIN EXTRUSION COATING Table of Contents Page What Are Polyolefins?.............................................................................................. 2 Effect of Molecular Structure and Composition on Properties and Processability .... 2 How Polyolefins Are Made ....................................................................................... 6 Polyolefins for Extrusion Coating ............................................................................. 7 LyondellBasell Works Closely with Processors ................................................................. 8 Shipping and Handling Polyolefin Extrusion Coating Resins .................................... 8 The Extrusion Coating Process .............................................................................. 8 Resin Handling/Conditioning ................................................................................ 8 Blending with Colorants and Additives ................................................................... 10 Substrate Handling and Surface Preparation ......................................................... 10 The Extrusion Coating Machine ............................................................................. 15 Start-Up of An Extrusion Coating Line ................................................................... 34 Guidelines for Start-Up ....................................................................................... 35 Shut-Down Procedures for Extrusion Coating Line ..............................................
    [Show full text]
  • The Effect of Injection Molding Conditions on The
    THE EFFECT OF INJECTION MOLDING CONDITIONS ON THE NEAR- SURFACE RUBBER MORPHOLOGY, SURFACE CHEMISTRY, AND ADHESION PERFORMANCE OF SEMI-CRYSTALLINE AND AMORPHOUS POLYMERS by Shannon Christine Weakley-Bollin A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy (Materials Science and Engineering) in the University of Michigan 2010 Doctoral Committee: Professor J. Wayne Jones, Co-Chair Professor David C. Martin, Co-Chair Professor Ronald G. Larson Deborah F. Mielewski, Ford Motor Company “Anyone who stops learning is old, whether at twenty or eighty. Anyone who keeps learning stays young. The greatest thing in life is to keep your mind young." Henry Ford © Shannon Christine Weakley-Bollin 2010 Acknowledgments I'd like to thank all of the people in the Materials and Processes department at Ford Motor Company's Research and Innovation Lab for their help and support, especially: Debbie Mielewski for volunteering to be on my committee and guiding me the entire way of my thesis; Patti Tibbenham for teaching me from her vast knowledge of polymer processing and helping me with just about every part of this thesis including designing and running the DOE in Chapter 4; Matt Zaluzec and James Boileau, my manager and supervisor who supported my pursuit of this degree; Ann Straccia and Larry Haack for teaching me how to use the XPS and helping me interpret the data; Mark Nichols for some helpful (and not so helpful) discussions about polymers and graduate school in general; Kevin Ellwood for insight in to the foreign world of modeling for this experimentalist; Tony Godlewski for conducting the impact testing in Chapter 2.
    [Show full text]
  • Standard Requirements for Thermoplastic Olefin Elastomer Based Sheet Used in Single-Ply Roof Membrane
    TESTING APPLICATION STANDARD (TAS) 131–95 STANDARD REQUIREMENTS FOR THERMOPLASTIC OLEFIN ELASTOMER BASED SHEET USED IN SINGLE-PLY ROOF MEMBRANE 1. Scope D 1149 Test Method for Rubber Deterioration - Surface Ozone 1.1 This Protocol covers unreinforced and rein­ Cracking in a Chamber (Flat forced thermoplastic olefin elastomer sheet Specimens) made from blends of polypropylene and eth­ D 1204 Test Method for Linear ylene-propylene rubber (TPO), intended for Dimensional Changes of Non- use as a roof membrane exposed to the weath­ rigid Thermoplastic Sheeting or er. Film at Elevated Temperature D 2137 Test Method for Rubber 1.2 The test and property limits are used to char­ Property - Brittleness Point of acterize the membrane and are minimum val­ Flexible Polymers and Coated ues. In-place roof system design criteria, such Fabrics as fire resistance, field seaming strength, G 26 Practice for Operating Light- material compatibility, and up-lift resistance, Exposure of Nonmetallic insitu shrinkage, among others, are factors Materials G 53 Practice for Operating which must be considered but are beyond the scope of this specification. Fluorescent UV – Condensation 1.3 The following precautionary caveat pertains (QUV) to the test methods portion only, Section 8, of D 1822 Tensile Impact Testing this specification: This Standard may involve E 96 Water Vapor Permeability, hazardous materials, operations, and equip­ Method BW ment. This standard does not purport to E 380 Excerpts from Use of the address all of the safety problems associated International System of Units with its use. It is the responsibility of the user (SI) (The Modernized Metric of this standard to establish appropriate safety System) and health practices and determine the applic­ ability of regulatory limitations prior to use.
    [Show full text]
  • Design, Development and Characterization of Polypropylene Clay Nanocomposites
    Design, Development and Characterization of Polypropylene Clay Nanocomposites A thesis submitted in fulfillment of the requirements for the degree of Doctor of Philosophy Muthukumaraswamy Pannirselvam M.E., M.S. School of Civil, Environmental and Chemical Engineering RMIT University March, 2008 DECLARATION I, Muthukumaraswamy Pannirselvam certify that except where due acknowledgement has been made, the work is that of author alone; the work has not been submitted previously, in whole or in part, to qualify for any other academic award. The contents of the thesis are the result of work which has been carried out since the official commencement date of the approved research program, at the School of Civil, Environmental, and Chemical Engineering, RMIT University, Melbourne, Australia. Muthukumaraswamy Pannirselvam 27 – 03 – 2008 II DEDICATION To my mother Vimala, may your roses always bloom fragrance from the heavens. To my wife Sangeeta, my best friend, for your love, appreciation, encouragement and emotional support, and To my daughter Rohitaa (Chaaru), for your ever green cherubic smile which energizes me instantly. III ACKNOWLEDGEMENTS Firstly, I would like to thank Prof. Sati Bhattacharya for his belief in me and his patience, most valuable guidance, assistance, suggestions and time during the course of this research project. Secondly, I would like to extend my thanks to Prof. Bob Shanks for sharing his vast knowledge and for his helpful instructions, supervision, advice, comments, enthusiasm, and for his open door policy to all students. My verbal appreciation can hardly express my gratitude to Dr. Rahul Gupta, whose suggestions and comments were invaluable. My thanks to Ms. Sharon Taylor who is always there to guide, support and assist all post graduate students.
    [Show full text]
  • A Review on EPDM / Polyolefinic Blends and Composites
    id2101734 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com Volume 5 Issue 3 Research &ISSN :R 2249e - v88i77ews In Polymer Review RRPL, 5(3), 2014 [102-114] A review on EPDM / polyolefinic blends and composites V.K.Abitha1,*, A.V.Rane2 1Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology, Kerala (INDIA) 2Centre for Green Technology, Institute of Chemical Technology, Mumbai, Matunga (INDIA) E-mail : [email protected] ABSTRACT KEYWORDS EPDM polymers are the fastest growing general purpose elastomers on the Ethylene propylene diene market today. Blends of EPDM and other polyolefinic polymers are most monomer; commonly used ones. There has been a large improvement in the produc- Polyolefenic; tion of EPDM and PP blends and composites. The composite industry is Compatibility; now being improved from the micro level to the nano level. Biocomposites Blends; based on EPDM and polypropylenes are now becoming more popular than Composites; the organic based composites. EPDM and Polypropylene are not compat- Grafting. ible with each other. Compatibilizers such as MA-g-EPDM are added in order to improve the compatibility of each other. In this review a study on various EPDM/PP blends and composites is carried out. 2014 Trade Science Inc. - INDIA INTRODUCTION (fibers, sheets or particles) and the other is matrix phase (polymer, metal or ceramic)[1-3]. Blending of EPDM The scientific and commercial progress in the area within the family of Polyolefin (PO) has, however, been of polymer blends and composites during the past two more common.
    [Show full text]