ANVIL-STRUT™ METAL FRAMING CONDENSED ENGINEERING CATALOG and PRICE SHEET AS - 8.08 • EFFECTIVE August 4, 2008 Cancels Price List AS - 6.08

Total Page:16

File Type:pdf, Size:1020Kb

ANVIL-STRUT™ METAL FRAMING CONDENSED ENGINEERING CATALOG and PRICE SHEET AS - 8.08 • EFFECTIVE August 4, 2008 Cancels Price List AS - 6.08 ANVIL-STRUT™ METAL FRAMING CONDENSED ENGINEERING CATALOG AND PRICE SHEET AS - 8.08 • EFFECTIVE August 4, 2008 Cancels Price List AS - 6.08 CHANNEL SPRING NUTS PIPE AND CONDUIT SUPPORTS FITTINGS & ACCESSORIES SUBJECT TO CHANGE WITHOUT NOTICE. GO TO WEB SITE FOR MOST CURRENT LIST PRICE INFORMATION/CHANGES OR CONTACT AN ANVIL REPRESENTATIVE. www.anvilintl.com Today Anvil International is the largest and most complete fitting and hanger manufacturer in the world. 2004 Anvil International acquires Star Pipe Products, Building and Construction Divisions (SPF) and forms Anvil Star Fire Products Division. 2001 Anvil International acquires Merit Manufacturing and Beck Manufacturing. 2000 The industry’s trusted manufacturer of pipe fittings, hangers and grooved fittings is renamed Anvil International, Inc. TRUSTED 1999 Tyco sells the distribution and manufacturing operations known up to this point as Grinnell FOR 150 YEARS Supply Sales, but keeps the “Grinnell” name. We built our reputation from the ground up. Anvil’s history stretches back to the mid 1800s, when a company named Grinnell® began providing its customers with the finest quality pipe products. 1994 J.B. Smith and Catawissa join the Grinnell Since 2000, those quality products and services— Supply Sales and Manufacturing division. and the people who provide them—have been known as Anvil International. Anvil customers receive the quality and integrity that have been building strong connections in both products and business relationships for over 150 years. Focused Product Line: 1969 Grinnell Co. acquired by International Telephone Anvil ® Malleable and Cast Gruvlok ® Couplings, and Telegraph. Two years later, ITT divests the Fire Iron Fittings Fittings and Valves Protection Division, but keeps the manufacturing Anvil ® Hangers, Supports SPF TM Imported Cast Iron and sales divisions that will become known as Anvil International. and Struts and Ductile Iron Fittings Beck Welded Pipe Nipples SPF TM Grooved Fittings and O’Lets Anvil ® Seamless Pipe Nipples J.B. Smith Swage Nipples 1960 Gruvlok line of grooved fittings is introduced. and Bull Plugs Anvil ® Steel Pipe Couplings and Small Steel Fittings Catawissa ® Wing Unions and Check Valves Merit ® O’Lets and Drop 1919 General Fire Extinguisher Co. becomes Grinnell Co. Nipples 1909 Frederick Grinnell opens a foundry in Cranston, RI. Companies express interest in buying its piping products, laying the groundwork for what would become the Grinnell Supply Sales Division. It would be these manufacturing and sales operations that eventually become Anvil International. 1850 Providence Steam & Gas Pipe Co. is formed, and Frederick Grinnell purchases a controlling interest. Grinnel is a registered trademark of Grinnell Corporation, a Tyco International LTD. company. BUILDING CONNECTIONS THAT LAST ANVIL BRANDS: TABLE OF CONTENTS Section Description Page – Pictorial Index . .4 – 13 1 Channel . 14 – 35 2 Channel Nuts and Hardware . 36 – 40 3 Fittings and Accessories . 41 – 69 4 Pipe and Conduit Supports . 70 – 76 5 Klo-Shure® . 77 6 Concrete Inserts . .78 – 80 7 Specialty Strut . .81 – 97 8Technical Information . 98 – 109 —Product Index . 110 – 113 —Terms and Conditions . 114 PRODUCT CODES Code Product Category AA Channels A1100, 1100AS, 1200, 619, Cushion Clamps, ASNS, ASRS BOther Pipe Clamps C Channel Nuts D General Fittings Hardware E Concrete Inserts F Klo-Shure® TO OUR VALUED CUSTOMERS Anvil-Strut™ products are carefully designed and manufactured to the listed standards, as applicable. However, Anvil-Strut™ reserves the right to revise product design without notification. Anvil-Strut™ products included in this catalog are intended for installation and service only as described or specified herein. Care should be exercised by installers and end-users to install, use and maintain these products prop- erly to avoid any possible on-the-job accidents. Prices subject to change without notice. Rev. 7/31/08 ANVIL-STRUT™ 3 PICTORIAL INDEX CHANNELS AS 100 AS 100EH AS 100KO AS 100H AS 100S AS 100BTB Channel Channel w/ Elongated Holes Channel w/ Knock Outs Channel w/ Holes Channel w/ Long Slots Welded Channel 5 1 5 1 5 1 5 1 5 1 5 1 Size: 1 /8"x 3/4"x 12 GA. Size: 1 /8"x 3/4"x 12 GA. Size: 1 /8"x 3/4"x 12 GA. Size: 1 /8"x 3/4"x 12 GA. Size: 1 /8"x 3/4"x 12 GA. Size: 1 /8"x 6/2"x 12 GA. 9 1 7 9 7 13 Page 26 /16"x 1/8" Elongated Holes /8" Knock Outs on 6" Centers /16" Holes on 1 /8" Centers /32"x 3" Slots on 4" Centers Two Pcs. AS 100 Welded on 2" Centers Page 26 Page 26 Page 26 Back-to-Back Page 26 Page 26 AS 150 AS 150EH AS 150KO AS 150H AS 150S AS 150BTB Channel Channel w/ Elongated Holes Channel w/ Knock Outs Channel w/ Holes Channel w/ Long Slots Welded Channel 5 7 5 7 5 7 5 7 5 7 5 7 Size: 1 /8"x 2/16"x 12 GA. Size: 1 /8"x 2/16"x 12 GA. Size: 1 /8"x 2/16"x 12 GA. Size: 1 /8"x 2/16"x 12 GA. Size: 1 /8"x 2/16"x 12 GA. Size: 1 /8"x 4/8"x 12 GA. 9 1 7 9 7 13 Page 27 /16"x 1/8" Elongated Holes /8" Knock Outs on 6" Centers /16" Holes on 1 /8" Centers /32"x 3" Slots on 4" Centers Two Pcs. AS 150 Welded on 2" Centers Page 27 Page 27 Page 27 Back-to-Back Page 27 Page 27 AS 200 AS 200EH AS 200KO AS 200H AS 200S AS 200BTB Channel Channel w/ Elongated Holes Channel w/ Knock Outs Channel w/ Holes Channel w/ Long Slots Welded Channel 5 5 5 5 5 5 5 5 5 5 5 1 Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 3/4"x 12 GA. 9 1 7 9 7 13 Page 28 /16"x 1/8" Elongated Holes /8" Knock Outs on 6" Centers /16" Holes on 1 /8" Centers /32"x 3" Slots on 4" Centers Two Pcs. AS 200 Welded on 2" Centers Page 28 Page 28 Page 28 Back-to-Back Page 28 Page 28 Discontinued Discontinued AS 200STS AS 200BTS AS 200STSR AS 200BTBS AS 200BTBF3 Welded Channel Welded Channel Welded Channel Welded Channel Welded Channel 5 1 5 1 5 1 5 1 5 1 Size: 1 /8"x 3/4"x 12 GA. Size: 1 /8"x 3/4"x 12 GA. Size: 1 /8"x 3/4"x 12 GA. Size: 1 /8"x 3/4"x 12 GA. Size: 1 /8"x 3/4"x 12 GA. Two Pcs. AS 200 Welded Two Pcs. AS 200 Welded Two Pcs. AS 200 Welded Three Pcs. AS 200 Welded Page 29 Side-to-Side Side-to-Back Side-to-Opposite Side Side-to-Side Page 29 Page 29 Page 29 Page 29 AS 210 AS 210EH AS 210KO AS 210H AS 210S AS 210BTB Channel Channel w/ Elongated Holes Channel w/ Knock Outs Channel w/ Holes Channel w/ Long Slots Welded Channel 5 5 5 5 5 5 5 5 5 5 5 1 Size: 1 /8"x 1/8"x 14 GA. Size: 1 /8"x 1/8"x 14 GA. Size: 1 /8"x 1/8"x 14 GA. Size: 1 /8"x 1/8"x 14 GA. Size: 1 /8"x 1/8"x 14 GA. Size: 1 /8"x 3/4"x 14 GA. 9 1 7 9 7 13 Page 30 /16"x 1/8" Elongated Holes /8" Knock Outs on 6" Centers /16" Holes on 1 /8" Centers /32"x 3" Slots on 4" Centers Two Pcs. AS 200 Welded on 2" Centers Page 30 Page 30 Page 30 Back-to-Back Page 30 Page 30 4 ANVIL-STRUT™ Rev. 7/31/08 PICTORIAL INDEX CHANNELS (Continued) AS 300 AS 300EH AS 300KO AS 300H AS 300S AS 300BTB Channel Channel w/ Elongated Holes Channel w/ Knock Outs Channel w/ Holes Channel w/ Long Slots Welded Channel 5 3 5 3 5 3 5 3 5 3 5 3 Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 1/8"x 12 GA. Size: 1 /8"x 2/4"x 12 GA. 9 1 7 9 7 13 Page 31 /16"x 1/8" Elongated Holes on /8" Knock Outs on 6" Centers /16" Holes on 1 /8" Centers /32"x 3" Slots on 4" Centers Two Pcs. AS 300 Welded 2" Centers Page 31 Page 31 Page 31 Back-to-Back Page 31 Page 31 AS 400 AS 400EH AS 400KO AS 400H AS 400S AS 400BTB Channel Channel w/ Elongated Holes Channel w/ Knock Outs Channel w/ Holes Channel w/ Long Slots Welded Channel 5 5 5 5 5 5 Size: 1 /8"x 1"x 12 GA. Size: 1 /8"x 1"x 12 GA. Size: 1 /8"x 1"x 12 GA. Size: 1 /8"x 1"x 12 GA. Size: 1 /8"x 1"x 12 GA. Size: 1 /8"x 2"x 12 GA. 9 1 7 9 7 13 Page 32 /16"x 1/8" Elongated Holes on /8" Knock Outs on 6" Centers /16" Holes on 1 /8" Centers /32"x 3" Slots on 4" Centers Two Pcs.
Recommended publications
  • Treatise on Combined Metalworking Techniques: Forged Elements and Chased Raised Shapes Bonnie Gallagher
    Rochester Institute of Technology RIT Scholar Works Theses Thesis/Dissertation Collections 1972 Treatise on combined metalworking techniques: forged elements and chased raised shapes Bonnie Gallagher Follow this and additional works at: http://scholarworks.rit.edu/theses Recommended Citation Gallagher, Bonnie, "Treatise on combined metalworking techniques: forged elements and chased raised shapes" (1972). Thesis. Rochester Institute of Technology. Accessed from This Thesis is brought to you for free and open access by the Thesis/Dissertation Collections at RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For more information, please contact [email protected]. TREATISE ON COMBINED METALWORKING TECHNIQUES i FORGED ELEMENTS AND CHASED RAISED SHAPES TREATISE ON. COMBINED METALWORKING TECHNIQUES t FORGED ELEMENTS AND CHASED RAISED SHAPES BONNIE JEANNE GALLAGHER CANDIDATE FOR THE MASTER OF FINE ARTS IN THE COLLEGE OF FINE AND APPLIED ARTS OF THE ROCHESTER INSTITUTE OF TECHNOLOGY AUGUST ( 1972 ADVISOR: HANS CHRISTENSEN t " ^ <bV DEDICATION FORM MUST GIVE FORTH THE SPIRIT FORM IS THE MANNER IN WHICH THE SPIRIT IS EXPRESSED ELIEL SAARINAN IN MEMORY OF MY FATHER, WHO LONGED FOR HIS CHILDREN TO HAVE THE OPPORTUNITY TO HAVE THE EDUCATION HE NEVER HAD THE FORTUNE TO OBTAIN. vi PREFACE Although the processes of raising, forging, and chasing of metal have been covered in most technical books, to date there is no major source which deals with the functional and aesthetic requirements
    [Show full text]
  • FIG. 7001 Flexible Coupling
    COUPLINGS FIG. 7001 Flexible Coupling The Gruvlok® Fig. 7001 Coupling forms a flexible grooved end pipe joint connection with the versatility for a wide range of applications. Services include mechanical and plumbing, process piping, mining and oil field piping, and many others. The coupling design supplies optimum strength for working pressures to 1000 PSl (69 bar) without excessive casting weight. The flexible design eases pipe and equipment installation while providing the designed-in benefit of reducing pipeline noise and vibration transmission without the addition of special components. To ease coupling handling and assembly and to assure consistent quality, sizes 1" through 14" couplings have two 180° segment housings, 16" have three 120˚ segment housings, and 18" through 24" sizes have four 90° segment housings, while the 28" O.D. and 30" O.D. For Listings/Approval Details and Limitations, visit our website at www.anvilintl.com or couplings have six 60° segment housings. The 28" O.D. and 30" O.D. are weld-ring couplings. contact an Anvil® Sales Representative. MATERIAL SPECIFICATIONS BOLTS: q Grade “T” Nitrile (Orange color code) SAE J429, Grade 5, Zinc Electroplated -20°F to 180°F (Service Temperature Range)(-29°C to 82°C) ISO 898-1, Class 8.8, Zinc Electroplated followed by a Yellow Chromate Dip Recommended for petroleum applications. Air with oil vapors and HEAVY HEX NUTS: vegetable and mineral oils. ASTM A563, Grade A, Zinc Electroplated NOT FOR USE IN HOT WATER OR HOT AIR ISO 898-2, Class 8.8, Zinc Electroplated followed by a Yellow Chromate Dip q Grade “O” Fluoro-Elastomer (Blue color code) HARDWARE KITS: Size Range: 1" - 12" (C style only) 3 20°F to 300°F (Service Temperature Range)(-29°C to 149°C) q 304 Stainless Steel (available in sizes up to /4") Kit includes: (2) Bolts per ASTM A193, Grade B8 and Recommended for high temperature resistance to oxidizing acids, (2) Heavy Hex Nuts per ASTM A194, Grade 8.
    [Show full text]
  • Aluminum Alloy AA-6061 and RSA-6061 Heat Treatment for Large Mirror Applications
    Utah State University DigitalCommons@USU Space Dynamics Lab Publications Space Dynamics Lab 1-1-2013 Aluminum Alloy AA-6061 and RSA-6061 Heat Treatment for Large Mirror Applications T. Newsander B. Crowther G. Gubbels R. Senden Follow this and additional works at: https://digitalcommons.usu.edu/sdl_pubs Recommended Citation Newsander, T.; Crowther, B.; Gubbels, G.; and Senden, R., "Aluminum Alloy AA-6061 and RSA-6061 Heat Treatment for Large Mirror Applications" (2013). Space Dynamics Lab Publications. Paper 102. https://digitalcommons.usu.edu/sdl_pubs/102 This Article is brought to you for free and open access by the Space Dynamics Lab at DigitalCommons@USU. It has been accepted for inclusion in Space Dynamics Lab Publications by an authorized administrator of DigitalCommons@USU. For more information, please contact [email protected]. Aluminum alloy AA-6061 and RSA-6061 heat treatment for large mirror applications T. Newswandera, B. Crowthera, G. Gubbelsb, R. Sendenb aSpace Dynamics Laboratory, 1695 North Research Park Way, North Logan, UT 84341;bRSP Technology, Metaalpark 2, 9936 BV, Delfzijl, The Netherlands ABSTRACT Aluminum mirrors and telescopes can be built to perform well if the material is processed correctly and can be relatively low cost and short schedule. However, the difficulty of making high quality aluminum telescopes increases as the size increases, starting with uniform heat treatment through the thickness of large mirror substrates. A risk reduction effort was started to build and test a ½ meter diameter super polished aluminum mirror. Material selection, the heat treatment process and stabilization are the first critical steps to building a successful mirror. In this study, large aluminum blanks of both conventional AA-6061 per AMS-A-22771 and RSA AA-6061 were built, heat treated and stress relieved.
    [Show full text]
  • Discuss Ways for the Beginning Blacksmith to Start Forging Metal
    Digital Demo Outline Objective: Discuss ways for the beginning blacksmith to start forging metal. Talk about strategies for tooling up: Where and how to find an anvil and anvil alternatives, hammers, tongs and forges. Discuss other shop tools that are the most necessary to get started. Do a short demo on the basics for moving the metal. Blacksmithing has a long tradition with many ways to reach the same goal. The information I’m sharing here is based on my own journey into blacksmithing and watching many beginners get started and seeing their challenges and frustrations. How do you want to approach blacksmithing? Do you want to gain experience by making your own tools or would you rather get to forging metal? Something in between? It’s good to think about this and form a game plan. It’s super easy to get bogged down in the process of making tools when all you really want to do is move hot metal. On the other hand, tons of great experience can be gained by making one’s own tools. -Outline of the basic starter kit.- •First hammer, selecting for size and shape. Handle modifications, Head modifications. •Anvil alternatives. Finding a “real” anvil, new vs. used, a big block of steel, section of railroad track and mounting on a stand. Using a ball bearing to show rebound test and a hammer for ring test. •What size tongs to buy and where. 3/8” square, ½” square, ¾” square. Why square and not round. •Forge: Propane or coal? Build or buy? With this class we will focus on propane because it is the easiest to get started with.
    [Show full text]
  • Library BGOP ID Title Author B090 the Abcs of Blacksmithing Fridolin
    library BGOP ID Title Author B090 The ABCs of Blacksmithing Fridolin Wolf B095 Agricultural Engineering in Development J. B. Stokes Advanced Blacksmithing:A Training Manual B097 Albert Pauley : Sculptural Adornment Renwick Gallery B098 Alfred Habermann - Blacksmith and Designer Peter Elgass B100 American Blacksmithing Holstrom & Holford B105 The American Hearth Barons&Card B105.5 American Indian Tomahawks Harold L. Peterson B106 An Introduction to Ironwork Marian Campbell B107 Anvils in America Richard A. Postman B107.2 The Anvil's Ring - 10th Anniversary The Anvil's Ring Issue - Patternbook for Artsmiths B107.3 Architectural Ironwork Dona Z. Meilach B107.4 The Armoire and His Craft - From Charles Ffoulkes the XIth to the XVIth Century B107.5 Art Deco Decorative Ironwork Henri Clouzot B107.6 Art Deco Ornamental Ironwork Henri Martine B107.8 Art Nouveau Decorative Ironwork Theodore Menten B108 Art from the Fire Julius Hoffmann B110 The Art of Blacksmithing Alex Bealer B112 The Art of Wrought Metalwork Otto Schmirler for House and Garden B113 The Artist Blacksmith - Design and Techniques Peter Parkinson B114 The Backyard Blacksmith Lorelei Sims B115 Basic Blacksmithing: A Training Manual J. B. Stokes B115.3 Basic Blacksmithing - An introduction to Harries&Heer toolmaking. Companion of B118.3 B115.5 Beautiful Iron - The Pursuit of Excellence Francis Whitaker B116.1 Best of the Hammer - Volume 1 Brian D. Flax B116.2 Best of the Hammer - Volume 2 Brian D. Flax B116.3 Best of the Hammer - Volume 3 Brian D. Flax B116.4 Best of the Hammer - Volume 4 Brian D. Flax B117 The Blacksmith & His Art J.E.
    [Show full text]
  • Anvil-Strut Price Sheet AS-3.11 | Effective: March 7, 2011 | Cancels Price Sheet AS-7.10 of July 6, 2010
    Anvil-StrUT Price Sheet AS-3.11 | Effective: March 7, 2011 | Cancels Price Sheet AS-7.10 of July 6, 2010 FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight (or motor freight at the lowest published rate) is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • UPC numbers and SPIN commodity identification numbers are available upon request. • To obtain current ISO certifications, listings and other approvals, visit Anvil’s Web site at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s Web site for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.
    [Show full text]
  • Anvil® 260 (ISS)
    ® Anvil 260 (ISS) Insulation Saddle System BUILDING CONNECTIONS THAT LAST For over 150 years, Anvil has worked diligently to build a strong, vibrant tradition of making connections — pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior customer service at all levels. We provide expertise and product solutions for a wide range of applications, from plumbing, mechanical, HVAC, industrial and fire protection to mining, oil and gas. Our comprehensive line of products includes: grooved pipe couplings, grooved and plain-end fittings, valves, cast and malleable iron fittings, forged steel fittings, steel pipe nipples and couplings, pipe hangers and supports, channel and strut fittings, mining and oil field fittings, along with much more. As an additional benefit to our customers, Anvil offers a complete and comprehensive Design Services Analysis for mechanical equipment rooms, to help you determine the most effective and cost-efficient piping solutions for your pipe system. At Anvil, we believe that responsive and accessible customer support is what makes the difference between simply delivering products — and delivering solutions. 260 (ISS) Insulation Saddle System Benefits • Reduces overall installation time The Anvil 260 (ISS) Insulation Saddle System reduces your overall installation time and greatly simplifies the way you insulate your copper or steel pipe • More competitive quotes systems. The revolutionary design of the 260 ISS spreads the load evenly • Saves labor for plumbing, over the hanger’s wide base — eliminating the need for wood blocks, mechanical, and insulating contractors shields, or costly hanger adjustments. • Suited for chilled and hot water systems from 40°F to 200°F Fully tested and rated for a temperature range from 40°F to 200°F, the 260 ISS is ideal for use with both chilled and hot water systems.
    [Show full text]
  • HPDC Alloys for Structural Casts in Vehicle Construction RHEINFELDEN ALLOYS
    Primary aluminum HPDC Alloys for Structural Casts in Vehicle Construction RHEINFELDEN ALLOYS Table of contents RHEINFELDEN ALLOYS – Ductile HPDC Aluminum Alloys for Automotive Structural Applications General 2 RHEINFELDEN ALLOYS GmbH & Co. KG 3 Customer support and R & D 4 – 5 Aluminum casting alloys Alloys 6 – 11 Silafont ®-38 (Sf-38) – AlSi9MnMgZn 12 – 13 Castasil ®-37 (Ci-37) – AlSi9MnMoZr 14 – 17 Castasil ®-21 (Ci-21) – AlSi9SrE 18 – 19 Magsimal ®-59 ( Ma-59) – AlMg5Si2Mn 20 – 25 Magsimal ®-plus (Ma-plus) – AlMg6Si2MnZr 26 – 35 Castaduct ®-42 (Cc-42) – AlMg4Fe2 Technical information 36 – 37 Profile of the alloys for the die-casters 38 – 44 Technical Informations / Processing datasheets 45 – 52 Technical informations 52 Disclaimer and imprint 1 RHEINFELDEN ALLOYS GmbH & Co. KG “Progress by tradition” Products of RHEINFELDEN ALLOYS can be found wherever ALUMINIUM RHEINFELDEN Group: This history of aluminum steel designs or iron casts can be replaced by light aluminum in Germany started at Rheinfelden. In 1898 Europe’s first casts. RHEINFELDEN ALLOYS is a powerful partner, especially river power station brought about the establishment of the first to the automotive and mechanical engineering sectors in provid- aluminum smelter in Germany, at Rheinfelden, Baden. ing alloys designed to the process and cast part based on the The company has always operated in three business segments customer’s particular needs. We also offer papers like this hand- and in October 2008 restructuring turned ALUMINIUM book about favorable alloys for designers of structural die-casts. RHEINFELDEN GmbH into a holding company and independent www.rheinfelden-alloys.eu · Tel. +49 7623 93 490 GmbH & Co. KGs.
    [Show full text]
  • PUNCHES and CHISELS Punches and Chisels the Anvil End on Heads of Snap-On® Punches and Chisels Are Machined to a Modified Parabolic Curve
    PUNCHES AND CHISELS Punches and Chisels The anvil end on heads of Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. PPC250BK Punch and Chisel Set. PPC100AK Punch and Chisel Set. ncludes 24 pcs. in KB2179 kit bag: Includes 10 pcs. in KB2175 kit bag: PPC1A PPC106A PPC205A PPC820B PPC812B PPC828B PPC15B PPC3A PPC108A PPC206A PPC824B PPC816B PPC12B PPC19B PPC250BK PPC4A PPC110A PPC208A PPC12B PPC820B PPC13B PPC103A PPC112 PPC210A PPC14B PPC824B PPC14B PPC104A PPC203A PPC812B PPC15B PPC100AK PPC105A PPC204A PPC816B PPC19B PPCD70BK Punch and Chisel Set. PPC210BK Punch and Chisel Set. Includes 7 pcs. in KB2183 kit bag: Includes 22 pcs. in KB2178 kit bag: PPC103A PPC106A PPC110A PPC1A PPC105A PPC204A PPC816B PPC104A PPC107A PPC5A PPC106A PPC205A PPC820B PPC105A PPC108A PPC3A PPC108A PPC206A PPC824B PPC210BK PPC4A PPC110A PPC208A PPC828B PPC103A PPC112 PPC210A PPCD70BK PPC104A PPC203A PPC812B PPCS60BK Punch and Chisel Set. Includes 6 pcs. in KB2185 kit bag: PPC715BK Punch and Chisel Set. PPC203A PPC205A PPC208A Includes 16 pcs. in KB2182 kit bag: PPC204A PPC206A PPC210A PPC1A PPC104A PPC203A PPC208A PPC3A PPC105A PPC204A PPC812B PPC4A PPC106A PPC205A PPC816B PPC715BK PPC103A PPC108A PPC206A PPC820B PPCS60BK PPC50AK Punch and Chisel Set.
    [Show full text]
  • Crosscut Saw Manual
    UUnitednited SStatestates DepartmentDepartment ofof AAgriculturegriculture rosscutrosscut SSaaw FForestorest SServiceervice C TTeecchnologyhnology & DDevelopmentevelopment PProgramrogram ManualManual 77100100 EEngineeringngineering 22300300 RRecreationecreation JJuunnee 11977977 RRev.ev. DDecemberecember 22003003 77771-2508-MTDC771-2508-MTDC United States Department of Agriculture Forest Service United States Department of Agriculture Technology & rosscutrosscut SSaaw Forest Service C Development Technology & Program Development Program ManualManual 7100 Engineering 7100 Engineering 2300 Recreation 2300 Recreation June 1977 Rev. December 2003 June 1977 7771-2508-MTDC Rev. December 2003 7771-2508-MTDC Warren Miller (retired) Moose Creek Ranger District Nez Perce National Forest USDA Forest Service Technology and Development Program Missoula, MT June 1977 Revised December 2003 The Forest Service, United States Department of Agriculture (USDA), has developed this information for the guidance of its employees, its contractors, and its cooperating Federal and State agencies, and is not responsible for the interpretation or use of this information by anyone except its own employees. The use of trade, firm, or corporation names in this document is for the information and convenience of the reader, and does not constitute an endorsement by the Department of any product or service to the exclusion of others that may be suitable. The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, sex, religion, age, disability, political beliefs, sexual orientation, or marital or family status. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, etc.) should contact USDA’s TARGET Center at (202) 720-2600 (voice and TDD).
    [Show full text]
  • ANVIL the Video Annotation Research Tool
    ANVIL The Video Annotation Research Tool Michael Kipp, DFKI, Saarbrücken, Germany [email protected] Abstract: Empirical research often involves three activities: the systematic annotation of audiovisual media (coding), the management of the resulting data in a corpus and various forms of statistical analysis. This chapter presents ANVIL, a highly generic and theory-independent research tool that supports all three activities in conjunction with audio, video and 3D motion capture data. The tool allows to specify a formal coding scheme as a blueprint for project-specific coding. The process of coding is conducted on parallel time-aligned tracks. Instead of simple tags, ANVIL offers typed attributes for describing the basic annotation elements which can be used to hide away complexity and reduce visual clutter. Track types (interval vs. point) and logical track relationships (singleton, span, subdivision) further increase the clarity and consistency of the coding. Spatial mark-up on the video frame allows to annotate regions over time. For corpus management, ANVIL allows to group annotation files into projects for browsing, export and analysis across a corpus of data. For analysis, the tool supports simple descriptive analyses like transition diagrams or label frequency histograms and more complex operations like automatic inter-coder agreement computation (Cohen's kappa). 1 Introduction Empricial researchers from many diverse areas use video recordings are their primary media for the systematic investigation of, e.g., human communication, animal behavior or human-computer interaction (cf. Rohlfing et al. 2006, Kipp et al. 2009 for overviews). No matter whether the investigation is more of qualitative or more of quantitative nature, a differentiated visualization and a symbolic transcription are prerequisite in these efforts.
    [Show full text]
  • The Tools and Trade Techniques of the Blacksmith
    The Tools and Trade Techniques of the Blacksmith From Henry J. Kauffman, Metalworking Trades in Early America, 1995. From the Collections at Historic Bethlehem [PA] The tools of the blacksmith varied from time to time and from place to place. They were generally divided into three groups. The first is the hearth with its bellows, water trough, shovels, tongs, rake, poker, and a water container for damping down the fire and cooling objects. The second group consists of the anvil, sledges, tongs, swages, cutters, chisels, and hammers. The third group was made up of the shoeing box, which contains knives, rasps, and files for preparing the horse's hooves for shoes, an iron stand for supporting the horse's foot while working on it, and a special hammer and nails to fasten the shoe to the hoof. The blacksmith worked with charcoal iron, so named because charcoal was used for fuel in the furnace that produced the iron. It seems not only to have been suited to the various ways it had to be "worked;" but also because of its other desirable qualities, much of it has outlived iron of a later period that lacked these qualities. Blacksmiths of the 18th and 19th centuries had different qualities of iron available to them. Even if a high grade of iron were used, the metal frequently needed additional attention by the smith before he used it. The limitations of the refining and rolling processes caused much of the iron to have an imperfect texture, usually referred to as fibrous. The blacksmith could improve this condition by heating the iron and vigorously hammering it on his anvil.
    [Show full text]