DOCSLIB.ORG

Cleaning Equipment

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Cleaning Equipment Table of Contents Cleaning Equipment Fuel Injection Pump Cleaning ..................................................................................................................................... 9-3 Pressure Washers ......................................................................................................................................................... 9-4 Blasting Equipment ..................................................................................................................................................... 9-41 Cleaning Equipment Miscellaneous ............................................................................................................................................................. 9-49 9-1 Table of Contents Cleaning Equipment 9-2 Fuel Injection Pump Cleaning Fuel Injection Pump Cleaning 2632528 6V-6188 Cleaning Tray Warranty: Six Months Part Number Description • Made to hold specific parts of the 6V-6188 Cleaning Tray unit injectors in groups while the parts are cleaned in the ultrasonic Cleaning Equipment cleaner tank • Keeps plungers, bushings, tips, and needles in sequence so that parts which fit together and must be kept together can be cleaned but not mixed • Fits in the tank of either ultrasonic cleaner group 2632542 212-1503 Parts Washer Kit Warranty: Manufacturer’s One Year European Union compliant, CE marked • Designed for use with water or water-based cleaners • Lightweight, portable parts washer designed with many features not found in other products • Operates on compressed air • Comes with lid that can be secured to reduce contamination • Lid will not prevent spillage • Primary filter blanket is 25 micron rating • Two filters help extend solvent life • For cold weather conditions RV antifreeze can be used with an aqueous clean- ing solvent • Flo-thru brush and triggered sprayer aids in cleaning of parts and small compo- nents • Remove solvent before transporting Reference NEHS0849, Tool Operating Manual Repair and Solvent Information Clayton Associates Unit 213 575 Prospect Street Lakewood, NJ 08701-5040 Phone: (732) 363-2100 Fax: (732) 364-6084 Web site: www.jclayton.com E-mail: [email protected] Capacity 13 L (5 gal) Air pressure requirements 147 kPa (21 psi) Overall size 640 x 460 x 200 mm (2.25 x 18.1 x 7.9 in) Service/Repair Parts Part Number Description 212-1503 Parts Washer Kit 212-1504 Oil Absorbent Sock 212-1505 25 mu Primary Filter Blanket 212-1506 Air Pump 212-1508 Flo-Thru Brush 9-3 Pressure Washers Pressure Washers 2632571 Industrial Duty, Cold Water, Electric-Powered Pressure Washers (Portable) Warranty: Manufacturer’s One Year (various on components) European Union compliant, CE marked (237-9168, 237-9169) • Rugged roll cage and chassis made of 31.75 mm (1 1/4 in) steel powder-coated with an epoxy finish for all-weather protection • Totally enclosed, OSHA-compliant, high-impact polyethylene belt guard and easy-to-adjust belt tension device • Industrial-grade, tri-plunger, oil-bath Legacy high pressure pump with forged brass head and three ceramic pistons; backed by a 5-year Legacy warranty • Safety thermal pump saver valve protects against hot water damage by venting recirculated water • Easy-to-attach downstream detergent injector with brass soap nozzle Cleaning Equipment • Inlet strainer protects pump from debris in the water source • Insulated trigger gun for hours of fatigue-free cleaning • Durable wire braid hose rated for up to 345 bar (5000 psi) with swivel crimp fit- ting for tangle-free washing • Insulated, stainless steel wand with quick-couple connectors for easy attach- ment of high-pressure nozzles • 5 conveniently mounted, quick-couple, high-pressure spray nozzles for varying fan spray • 33 cm (13 in) tubed pneumatic tires with steel wheels for easy maneuvering on all terrains and vibration absorption • Rubber feet to absorb vibration and keep the unit from “walking” • Notched V-belts and cast iron pulleys reduce belt slippage and provide longer pump life • Warning and operating instructions visible on unit • Industrial-duty Baldor motor with 3 m (10 ft) electrical cord and Ground Fault Circuit Interrupter (GFCI) for operator protection • Heavy-duty lifting beam for ease in loading and transporting Repair Information International Resource Management 1310 South Main P.O. Box 571 Princeton, IL 61356 Phone: (815) 872-7400 or (800) 550-5019 Fax: (815) 872-7404 (Continued) 9-4 Pressure Washers 2632571 Industrial Duty, Cold Water, Electric-Powered Pressure Washers (Portable) (Continued) Warranty: Manufacturer’s One Year (various on components) Cat® Part 235-3047 235-3046 237-9169 235-3049 235-3048 237-9168 Number Pressure 138 bar 138 bar 138 bar 207 bar 207 bar 207 bar (2000 psi) (2000 psi) (2000 psi) (3000 psi) (3000 psi) (3000 psi) Volume 16 lpm (4.2 16 lpm (4.2 16 lpm (4.2 18 lpm (4.8 18 lpm (4.8 18 lpm (4.8 Cleaning Equipment gpm) gpm) gpm) gpm) gpm) gpm) Pump Belt Belt Belt Belt Belt Belt Horse- 6 Hp elec- 6 Hp elec- 6 Hp elec- 10 Hp 10 Hp 10 Hp power tric motor tric motor tric motor electric electric electric motor motor motor Volts/Hz/ 230/60/1 230/50/3 230/50/3 230/60/3 230/50/3 230/50/3 ph Amps 20 30 30 17 17 24 Soap Low pres- Low pres- Low pres- Low pres- Low pres- Low pres- Control sure sure sure sure sure sure Hose 15.25 m x 15.25 m x 15.25 m x 15.25 m x 15.25 m x 15.25 m x Length, 9.53 mm 9.53 mm 9.53 mm 9.53 mm 9.53 mm 9.53 mm Diameter (50 ft x (50 ft x (50 ft x (50 ft x (50 ft x (50 ft x 0.375 in) 0.375 in) 0.375 in) 0.375 in) 0.375 in) 0.375 in) Gun type Trigger Trigger Trigger Trigger Trigger Trigger shutoff shutoff shutoff shutoff shutoff shutoff Tip Type Multi-jet Multi-jet Multi-jet Multi-jet Multi-jet Multi-jet Adjustable Standard Standard Standard Standard Standard Standard Pressure Shipping 136 kg (300 136 kg (300 136 kg (300 145 kg (320 145 kg (320 104 kg (230 Weight lb) lb) lb) lb) lb) lb) Dimen- 1067 x 737 1067 x 737 965.2 x 762 1067 x 737 1067 x 737 965.2 x 762 sions (L x x 737 mm x 737 mm x 762 mm x 737 mm x 737 mm x 762 mm W x H) (42 x 29 x (42 x 29 x (38 x 30 x (42 x 29 x (42 x 29 x (38 x 30 x 29 in) 29 in) 30 in) 29 in) 29 in) 30 in) Part Number Description 235-3046 Portable Electric - Powered Pressure Washer (Cold Water) 235-3047 Portable Electric - Powered Pressure Washer (Cold Water) 235-3048 Portable Electric - Powered Pressure Washer (Cold Water) 235-3049 Portable Electric - Powered Pressure Washer (Cold Water) 237-9168 Portable Electric - Powered Pressure Washer (Cold Water) 237-9169 Portable Electric - Powered Pressure Washer (Cold Water) For 235-3047 235-3109 Replacement Tip Kit 235-3120 Replacement Hose 235-3126 Replacement Spray Gun 235-3129 Replacement Wand Group For 235-3046 235-3110 Replacement Tip Kit 235-3118 Replacement Hose 235-3126 Replacement Spray Gun 235-3129 Replacement Wand Group (Continued) 9-5 Pressure Washers 2632571 Industrial Duty, Cold Water, Electric-Powered Pressure Washers (Portable) (Continued) Warranty: Manufacturer’s One Year (various on components) Part Number Description For 237-9169 235-3110 Replacement Tip Kit 235-3118 Replacement Hose 235-3126 Replacement Spray Gun 235-3129 Replacement Wand Group For 235-3049 235-3109 Replacement Tip Kit 235-3120 Replacement Hose 235-3126 Replacement Spray Gun Cleaning Equipment 235-3129 Replacement Wand Group For 235-3048 235-3109 Replacement Tip Kit 235-3120 Replacement Hose 235-3126 Replacement Spray Gun 235-3129 Replacement Wand Group For 237-9168 235-3109 Replacement Tip Kit 235-3120 Replacement Hose 235-3126 Replacement Spray Gun 235-3129 Replacement Wand Group 2632595 Industrial Duty, Cold Water, Gasoline- or Diesel-Powered Pressure Washers Warranty: Manufacturer’s One Year • Cold water pressure washer with cleaning power of up to 345 bar (5000 psi) • Rugged roll cage and chassis made of 31.75 mm (1 1/4 in) steel and powder coated with an epoxy finish for all-weather protection • Totally enclosed, OSHA-compliant, high-impact polyethylene belt guard and easy-to-adjust belt tension device • Industrial-grade, tri-plunger, oil-bath Legacy high pressure pump with forged brass head, ceramic pistons and EZ start valve for resistance-free pull starting of engine • Safety thermal pump saver valve protects against hot water damage by venting recirculated water • Rubber feet to absorb vibration and keep the unit from “walking” • Inlet strainer protects pump from debris in the water source (not visible) • Insulated trigger gun for hours of fatigue-free cleaning • Durable wire braid hose rated for up to 345 bar (5000 psi); with swivel crimp fitting for tangle-free washing • Insulated, stainless steel wand with quick-couple connectors for easy attachment of high-pressure nozzles • 5 conveniently-mounted, quick-couple, high-pressure spray nozzles for varying fan spray (not visible) • Easy-to-attach downstream detergent injector with brass soap nozzle • 33 cm (13 in) tubed pneumatic tires with steel wheels for easy maneuvering on all terrains and to absorb vibration • Notched V-belts and cast-iron pulleys reduce belt slippage and provide longer pump life • Warning and operating instructions for owner liability protection • Reliable Honda or Vanguard engine with 2-year warranty; low-oil alert and silent-tone muffler • Heavy-duty lifting beam for ease in loading and transporting Repair Information International Resource Management 1310 South Main P.O. Box 571 Princeton, IL 61356 Phone: (815) 872-7400 or (800) 550-5019 Fax: (815) 872-7404 (Continued) 9-6 Pressure Washers 2632595 Industrial Duty, Cold Water, Gasoline- or Diesel-Powered
Load more

Recommended publications
  • Parts Cleaner Risk Assessment
    Tel: 1300 55 3001 | Fax: 07 3337 9981 | 14b Beachway Pde, Marcoola QLD 4564 [email protected] | www.haztek.com.au | ABN: 57 130 218 834 Company: Project: Parts Cleaner Risk Assessment Scope: Comparative Assessment for Selected Parts Cleaner Products Date of Review: 19th January 2012 HAZTEK Ref: 10674 Version: V2.2 Prepared by: Maurice Barnes Principal Consultant HAZTEK Pty Ltd Objective: To assess and compare the risks of exposure to selected parts cleaner products when cleaning materials. HAZTEK 10674 V2.2 i Parts Cleaner Risk Assessment TABLE OF CONTENTS PAGE Executive Summary .................................................................................................................. 1 1 Introduction ....................................................................................................................... 5 2 Methodology ..................................................................................................................... 5 3 References ......................................................................................................................... 7 4 Background ....................................................................................................................... 9 5 Hazardous Substance Risk Assessment ............................................................................ 9 5.1 Health Hazards .......................................................................................................... 9 5.2 Exposure Routes ......................................................................................................
    [Show full text]
  • Solvent Parts Cleaner Cm80
    INDUSTRIAL - SOLVENT PARTS CLEANER OPERATION & INSTRUCTION MANUAL CM80 ELECTRIC, AIR, AUTO LID I. Introduction A. Manufacturer’s Statement This manual will provide you with important information about the Solvent Parts Cleaners and will instruct you on how to use this equipment in a safe manner. The information contained in this manual is necessary for the safe, proper setup and operation of your Solvent Parts Cleaner. Keep this manual, along with the Material Safety Data Sheets (MSDS) for the solvent in use, within easy reach of the operator of this parts cleaner. The equipment described in this manual is subject to change. The manufacturer reserves the right to change equipment at any time as part of normal product improvement. Some improvements may have been made after this manual was printed. For the latest information on your equipment, contact the manufacturer. B. General Information CAUTION READ AND UNDERSTAND ALL LABELS, MSDS, AND THIS INSTRUCTION MANUAL BEFORE USE. The Industrial Solvent Parts Cleaner is an economical, safe, and innovative system designed to clean parts, using a mineral spirits based solvent. Solvents, when used to clean grease and oil, must be disposed of properly. Consult your local environmental management agency for additional guidance and other potentially hazardous materials compliance requirements. Install your parts cleaner on a flat, level surface in an area provided with adequate ventilation. Avoid repeated or prolonged breathing of vapors. Do NOT use compressed air to dry parts as this may cause a high concentration of vapors in the immediate area. Local exhaust ventilation should be used in areas of high vapor concentration.
    [Show full text]
  • Theory of Operation: How Parts Cleaning Works
    Theory of Operation: How Parts Cleaning Works MART defines the term to clean as to overpower the soils. The MART Parts Washer is a high-impact pressure, high-temperature, industrial water-based cleaning system that uses a combination of the following factors to achieve cleaning results: Power x Temperature x Chemical x Time = Clean The relationship of these variables can be varied in an infinite number of ways to achieve the same level of cleanliness. Your own needs determine the relative value of each variable. Keep in mind that the MART Parts Washer provides one of the highest blasting powers in the cleaning industry, allowing you to reduce the wash-cycle times for your parts to a minimum. Additionally, the high blasting power allows you to operate the washer at lower cleaning temperatures, thus saving energy, and using less chemical than spray washers The exact combination of the factors must be determined for your application, based on the types of soils to be removed, the degree of cleanliness required, the cycle time required, the types of parts to be cleaned, and so on. How the Parts Washer Works The parts washer operates on a timed cycle. The operator places the parts to be cleaned in the washer on the turntable, closes and latches the door, and then starts the timed cleaning cycle. During the cleaning cycle, a high-temperature, high-pressure, water-and-detergent cleaning solution blasts soils from the parts. After the cycle has stopped and the steam has exhausted, the operator removes the cleaned parts. The parts washer utilizes closed loop, waste minimization technology, continuously reusing its cleaning solution and effectively reducing pollution potential.
    [Show full text]
  • PWC (Parts Wash Cleaner)
    PWC (Parts Wash Cleaner) PWC is a clear blue liquid with a pleasant solvent odor. PWC is a blend of aliphatic solvents coupled with select oils and penetrants to provide rapid cleaning and excellent solvency. The flash point of PWC is 122°F (PMCC method). PWC is a 100% active blend designed to remove grease, oil and other common soils found on all automotive parts and industrial equipment. PWC is suited for a wide variety of parts cleaning systems and tanks. PWC is ready to use straight from the drum. Simply pour it into the fluid reservoir and you are ready to go. Although designed to use in parts washers, PWC works equally well in manual cleaning operations or it may be applied to spray or brush for cleaning larger parts. PWC has many advantages. Some of them are as follows: 1. Penetrates to provide fast cleaning of all types of petroleum soils. 2. Cleans faster than straight kerosene, naphtha or diesel fuel, leaving less residue. 3. Contains no emulsifiers to entrap incidental moisture and reduce solvency. 4. Select oils give maximum worker comfort by reducing drying effects of solvent on skin. 5. Requires no time consuming premixing, thus reducing cost. 6. Is safe on all metals as it contains no acids or alkalies. PWC can be used safely on aluminum, brass, copper and plated parts. Easy to Clean Low Maintenance As simple as 1 - 2 - 3! 1. Attach a hose to the spout of the parts washer and pump PWC from the parts washer into a bucket. 2. Empty dirty oily water and sludge into another container*.
    [Show full text]
  • The Biomatic® Parts Cleaning System Is…
    BIOMATIC® The Environmentally Friendly Bioremediation Parts Washer 1 The Biomatic® Parts Cleaning System Is… • A Bioremediation System. The Graymills Biomatic Parts Cleaning System uses the natural technology of microbial bioremediation to reduce oils, greases and other hydrocarbons introduced into the cleaning system to water and carbon dioxide (CO2). No oil and hydrocarbon buildup means the unit continues to clean parts indefinitely (we recommend cleaning the tank once a year, but the fluid can be put back in for continued use if desired.) • A Waste Minimization System. Talking to your customers about “waste minimization” will get their attention. With the Graymills Biomatic Parts Cleaning System, users will go from monthly dumping of fluid and unit cleanup…to once a year. That’s a “waste minimization” sales story few customers can resist. • A Tough Cleaner. Aqueous based Super Biotene® is pH neutral with a mild, pleasant odor. A mixture of emulsifiers and surfactants, they contain no VOCs, so they’re EPA and air quality friendly! Super Biotene cleans grease and grime off even the dirtiest parts, then the microbes go to work, reducing the hydrocarbon contaminants (oils, greases) to water and CO2. • A Good Investment. Recycling costs are slashed…parts cleaner waste is minimized…the dirtiest parts come clean…and the system is operator friendly. 2 How The Biomatic® Parts Cleaning System Works It is important to understand that the Biomatic® Parts Cleaning System is more than individual products - it is a total cleaning environment. The Biomatic Parts Cleaning System relies on the perfect balance between the Super Biotene® cleaning solution and the microbes introduced into the system.
    [Show full text]
  • Attachment 3 Preparedness and Prevention Plan
    AZ HWMA PERMIT ATTACHMENT 3 EPA ID NO. AZD981969504 PREPAREDNESS AND PREVENTION PLAN SAFETY-KLEEN CHANDLER FINAL PERMIT ATTACHMENT 3 PREPAREDNESS AND PREVENTION PLAN 3.0 Abstract 3.0.1 Security Measures The site is secured as follows: a. There is a barrier around the facility that includes a six-foot block wall topped with three strands of barbed wire around the back and sided of the facility. Along the front of the facility there is a six-block wall and two rolling steel gates topped with metal spikes instead of barbed wire. The gates are lockable. b. Warning signs are posted at all entrances. c. Locks are on all entrances to the warehouse. d. Controls for all tank operations are inside the office area. e. Site lighting is automatically controlled. 3.0.2 Inspection Procedures See Appendix E–4 (“Example Inspection Forms”). 3.0.3 Required Equipment The emergency equipment requirement is met with the following: a. Internal communications will be by voice and intercom. b. Telephones are available in the office return and fill area, and the warehouse. c. Fire extinguishers are available next to three exits in the warehouse. d. Water is available from the City of Chandler. There are four fire hydrants located on Frye Road between Beck Avenue and McKemy Avenue, in addition to a hydrant on the northwest corner of Frye Road and Beck Avenue. All of these hydrants are within 1000 feet of the service center and all meet City of Chandler requirements. The average flow rate is 1,200 – 1,400 gallons per minute, with a static pressure of 75 to 85 pounds per square inch gauge.
    [Show full text]
  • Clean Ozzyjuice Means Clean Parts
    ® OZZYMAT The SmartWasher® Bioremediating Parts Washing System is both self-cleaning and non-hazardous. Through the process of bioremediation the SMARTWASHER constantly maintains the cleanliness of the OZZYJUICE cleaning/degreasing solution without the need for hauling, skimming or evacuating the unit. WHAT IS OZZYJUICE®? OZZY ® OZZYJUICE is a powerful, aqueous based degreasing MICROBES Ozzy Ozzy ® Microbe solution that is pH-neutral, non-irritating, non-flammable, and non-toxic. Armed with superior cleaning capability, the OZZYJUICE solutions will match or surpass the performance of a premium solvent without all the associated risks. All HEATED OZZYJUICE OZZYJUICE solutions are certified by both NSF and AQMD. HEATING 300 GPH ELEMENT RECIRCULATING OZZY® MICROBES KEEP THE OZZYJUICE CLEAN AND STRONG. PUMP MODELS Microbes (OZZYS), introduced into the SMARTWASHER 14161 14145 14711 system through the OZZYMAT, eat the grease, oil and other contaminants, cleaning off the dirty parts, creating the harmless by-products of carbon dioxide and water. CLEAN OZZYJUICE MEANS CLEAN PARTS. SW-23 SW-25 SW-25C Mobile Parts/Brake Signature Parts Combo Brake/Parts Washer Washer Washer The OZZYJUICE cleaning/degreasing solution cleans the dirty 14144 14710 14162 parts and the OZZY microbes clean the OZZYJUICE leaving it strong and clean for every use. You should never need to haul away dirty parts cleaning fluid again, if the unit is maintained properly, and according to the operating instructions. Ozzy® SW-28 SW-28XE SW-37 ® Microbe Ozzy SuperSink Parts SuperSink XE Parts Mobile Heavyweight Washer Washer Parts Washer www.crcindustries.com/ei | 885 Louis Drive, Warminster, PA 18974, (PH) 800-272-4620 Copyright © 2015 ChemFree Corporation, a subsidiary of CRC Industries.
    [Show full text]
  • Hazardous Waste Self Audit
    Hazardous Waste Self Audit Section: Waste Parts Washer Solvent Section: Waste Parts Washer Solvent Self-Audit Refer to the tips, action steps and resources to help you complete the audit. Tips, Action Steps & Resources 1. Does your business have a petroleum-solvent-based and/or water-based (aqueous) parts washer? Yes, this business has a water-based (aqueous) parts washer. Stop here Identifying your parts washer — submit this form, and download, complete and submit the Section: If you are confused about what type of parts washer you have Water-Based (Aqueous) Parts Washer at www.hennepin.us/selfaudit. or have questions about how to Yes, this business has a petroleum-solvent-based parts washer. Go to complete the self audit, call 612 question 2. -348-3777 for assistance. Yes, this business has both a water-based (aqueous) parts washer and petroleum-solvent-based parts washer. Download and complete the For more information See Solvent-Based Parts Section: Water-Based (Aqueous) Parts Washer at www.hennepin.us/ Washer at selfaudit. Go to question 2. www.pca.state.mn.us/ No. Move on to the next section. publications/w-hw4-43.pdf. See Water-Based (Aqueous) 2. Do you only clean oily parts in your petroleum-solvent-based parts Parts Washer at washer? www.pca.state.mn.us/ Yes. Go to question 3. publications/w-hw4-44.pdf. No. List what is clean off of parts: ____________________________ ________________________________________________________ ________________________________________________________ 3. Does your solvent-based parts washer have a filter? Yes. Go to question 4. No. Go to question 5. 4. How do you manage used filters from your petroleum-solvent-based parts washer? I store and dispose of my used parts washer filters with my used oil filters (this is acceptable as long as you are only cleaning oil off of parts, are a Very Small Quantity Generator (VSQG) and have obtained permission from your used oil filter hauler to mix these wastes).
    [Show full text]
  • KLONDIKE Parts Washer Solvent
    SAFETY DATA SHEET KLONDIKE Parts Washer Solvent SECTION 1. IDENTIFICATION Product identifier used on the label KLONDIKE Parts Washer Solvent Product Code(s) : None reported. Recommended use of the chemical and restrictions on use : Industrial solvent. Use pattern:Professional Use Only Restriction on use: None known Chemical family : Petroleum distillates Name, address, and telephone number of the supplier: KLONDIKE Lubricants Corporation 3078 275th Street Langley, BC V4W 3L4 Canada General Information 1- 877-293-4691 www.klondikelubricants.com [email protected] SECTION 2. HAZARDS IDENTIFICATION Classification of the chemical Clear colourless liquid. Petroleum hydrocarbon odour. This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200) (Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015). Hazard classification: Flammable Liquids - Category 3 Skin Irritation - Category 2 Specific Target Organ Toxicity, Single Exposure - Category 3 narcotic effects Aspiration toxicity: Category 1 Label elements Hazard pictogram(s) Signal Word DANGER! Hazard statement(s) Flammable liquid and vapor. Causes skin irritation. May cause drowsiness and dizziness. May be fatal if swallowed and enters airways. Material name: KLONDIKE Parts Washer Solvent SDS US Version #: 01 Issue date: 02-18-2021 1 / 13 Precautionary statement(s) Keep away from heat, sparks and open flame. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical and ventilating equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing mist or vapours. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing.
    [Show full text]
  • Shop Guide for Dangerous Waste Management
    Shop Guide For Dangerous Waste Management Revised February 2010 Publication no. 09-04-015 Central Region Northwest Region 15 W Yakima Ave #200 3190 160th Ave SE Yakima WA 98902-3452 Bellevue WA 98008-5452 Eastern Region Southwest Region N 4601 Monroe PO Box 47775 Spokane WA 99205-1295 Olympia WA 98504-7775 Table of Contents Introduction .......................................................................................................... 1 Parts Washers ..................................................................................................... 1 Aerosol cans ....................................................................................................... 2 Shop Towels and Rags ........................................................................................ 3 Used Oil ............................................................................................................... 3 Spent Antifreeze .................................................................................................. 4 Light Bulbs and Ballasts ....................................................................................... 5 Batteries .............................................................................................................. 5 Paint Wastes ........................................................................................................ 6 Dangerous Waste Accumulation and Storage ...................................................... 8 Waste Containers ...............................................................................................
    [Show full text]
  • Shop Equipment
    SHOP EQUIPMENT OEMTOOLS™ Parts Washers are a New Generation of Water-Based Parts Washers Providing All the Cleaning Power of Solvent Parts Washers While Using Cleaning Solutions That are Safe and Biodegradable. Portable Bucket-Top Bench Top Gallon Parts Washer Mobile Parts Washer Parts Washer SKU 300128 99 SKU 546660 99 SKU 003759 99 24800 69 24804 129 24816 39 • Water-Based Parts Washer with • Solution Capacity (Gallons): • Fits Most Standard 325 Gallon per Hour Electric Pump Min. 2 - Max. 4 5 Gallon Buckets • Steel Work Basin is • Use with Water Works™ • Includes a Submersible 18"(L) x 13.5"(W) x 9"(H) Heavy-Duty Degreaser Pump, 40" Hose and Concentrate Flow-Through Brush Replacement • Not for Petroleum Based Solvents • Pumping Rate: 1 GPM Washer Pump • Weight: 11 Lbs. • For Degreasing Small Parts SKU 462484 99 • Dimensions: 26"(L) x and Tools 24800-12 39 18" (W) x 9.5"(H) • Fits OEMTOOLS™ 24800 and Does Not Include OEMTOOLS™ 24801 Lid has Positive Seal 5 Gallon Bucket Water-Based Parts Washer and Latches for Mobility 20 Gallon Parts Washer 40 Gallon Parts Washer 16 Gallon Solvent SKU 300117 99 SKU 300118 99 Parts Washer 24801 149 24803 279 SKU 479979 99 • Water-Based Parts Washer with • Use with Non-Flammable, Water-Based FOU62125-01 449 325 Gallon per Hour Electric Pump Degreaser or Cleaning Agent • Removable Screen Filter for Pump Protection • Steel Work Basin is 31"(L) x 21"(W) x 34.5"(H) • Fully Flexible Nozzle and • Flow Through Brush with Adjustable • Lid Includes Fusible Link for Fire Safety Fusible Link Which Automatically
    [Show full text]
  • Graymills Parts Washer Catalog
    PARTS WASHER CATALOG : solvent : solvent/aqueous : aqueous : bioremediation : ultrasonic : cleaning fluids : accessories : custom systems : Graymills.com 1.888.GRAYMILLS Selecting the right parts washer Both your Graymills distributor and our factory staff are prepared to offer any assistance in selecting your parts cleaner. The more of the following information you furnish, the quicker— and more precisely—the appropriate parts washer can be selected. O Soils to be removed. O Current cleaning method used. O Material(s) from which your parts are manufactured. O Size, weight, configuration and quantity of the parts to be cleaned per day. O Operations immediately before and after cleaning. (e.g., “machine before/paint after.”) O Preferred method of handling: manual or automatic. O Single or multi-step cleaning required. O Type of cleaning fluid: solvent or water-based. Choosing your cleaning action GA GB GC GD SOAK BRUSH DIRECTED HIGH STREAM PRESSURE SPRAY Soaking is the simplest, Manual brushing is used A flexible hose is used to Quick and effective cleaning least aggressive cleaning as a supplement to other direct a flushing stream of is accomplished by a action. It is more effective cleaning actions. This low pressure cleaning fluid powerful spray of heated, with longer immersion method is helpful in directly at the soiled part. water-based cleaning time. This cleaning action removing stubborn soils This cleaning action is solution. The high pressure is applicable where soils in hard to reach places. particularly effective for spray blasts away the are easily removed and An assortment of parts flushing parts when brushing. toughest deposits without where low equipment cleaning brushes is available For maximum results, the damaging precision parts.
    [Show full text]