DOCSLIB.ORG

Shop Equipment

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Shop Equipment SHOP EQUIPMENT OEMTOOLS™ Parts Washers are a New Generation of Water-Based Parts Washers Providing All the Cleaning Power of Solvent Parts Washers While Using Cleaning Solutions That are Safe and Biodegradable. Portable Bucket-Top Bench Top Gallon Parts Washer Mobile Parts Washer Parts Washer SKU 300128 99 SKU 546660 99 SKU 003759 99 24800 69 24804 129 24816 39 • Water-Based Parts Washer with • Solution Capacity (Gallons): • Fits Most Standard 325 Gallon per Hour Electric Pump Min. 2 - Max. 4 5 Gallon Buckets • Steel Work Basin is • Use with Water Works™ • Includes a Submersible 18"(L) x 13.5"(W) x 9"(H) Heavy-Duty Degreaser Pump, 40" Hose and Concentrate Flow-Through Brush Replacement • Not for Petroleum Based Solvents • Pumping Rate: 1 GPM Washer Pump • Weight: 11 Lbs. • For Degreasing Small Parts SKU 462484 99 • Dimensions: 26"(L) x and Tools 24800-12 39 18" (W) x 9.5"(H) • Fits OEMTOOLS™ 24800 and Does Not Include OEMTOOLS™ 24801 Lid has Positive Seal 5 Gallon Bucket Water-Based Parts Washer and Latches for Mobility 20 Gallon Parts Washer 40 Gallon Parts Washer 16 Gallon Solvent SKU 300117 99 SKU 300118 99 Parts Washer 24801 149 24803 279 SKU 479979 99 • Water-Based Parts Washer with • Use with Non-Flammable, Water-Based FOU62125-01 449 325 Gallon per Hour Electric Pump Degreaser or Cleaning Agent • Removable Screen Filter for Pump Protection • Steel Work Basin is 31"(L) x 21"(W) x 34.5"(H) • Fully Flexible Nozzle and • Flow Through Brush with Adjustable • Lid Includes Fusible Link for Fire Safety Fusible Link Which Automatically Fluid Control Closes the Lid in Case of Fire • Galvanized Drawn Sink Means No Leaks Replacement Washer Pump • Dimensions: • Inside Sink Dimensions: SKU 462484 99 44.75"(L) x 20.5"(W) x 35"(H) 31"(L) x 21"(W) x 9"(D) 24800-12 39 Replacement Washer Pump • Fits OEMTOOLS™ 24800 and 30 Gallon CleanMaster ™ SKU 462476 OEMTOOLS 24801 Water-Based 99 Solvent Parts Washer Parts Washer 24803-31 39 • Fits OEMTOOLS™ 24803 Water- SKU 479981 99 Based Parts Washer FOU54821-01 759 Includes Drum 12 Gallon CleanMaster RS500 Professional RS750 Truck Spray Low-Profile Solvent Brake Spray Wash Cabinet Wash Cabinet Parts Washer SKU 902189 SKU 902197 99 99 SKU 479982 RANRS500 RANRS750 99 3,689 4,599 Inside FOU57429-01 • Inside Height: 43" • Inside Height: 54" 749 Inside Height • Flow-Through Brush System • Heavy-Duty Steel Construction • Heavy-Duty for Efficient Cleaning Height Steel Construction 54" • Removable Parts Tree • Durable, Baked-On Powder • Brass Nozzles 43" • Removable Parts Tree Coated Epoxy Finish • Heavy-Duty Rubber Casters • Brass Nozzles • Easy-Roll Swivel Casters • Stainless Oil Skimmer • Heavy-Duty (2 Locking) • Removable Tank Screen Rubber Casters • Stainless Oil Skimmer • Removable Tank Screen Air Operated Sprayer SKU 222507 99 20 Lbs. Aluma-Klean Soap Bucket • Non-foaming • Powdered LIN5983 49 SKU OUTSIDE BUY/EPO 99 • Low pH • Removes Grease, Oil, • 1/4" NPT (F) Inlet RAN5155096 • Mild Alkali Stains, Carbon, Protein, Available via Outside Buy/EPO, • Max. Operating Pressure: 150 PSI 84 • Water Soluble Some Paints Call 1-877-298-6651 for Ordering • Can Be Used with Solvents or Detergent Solutions Atlasta™ Parts Oriflo Flow-Through Parts Brush Flow-Through Heavy Duty Degreaser Cleaning Brush SKU 342336 99 Brush with Hose Concentrate SKU 342339 99 PBC50001 24 SKU 459114 99 PBC50003 19 • Long Lasting, Stiff Trialoy® Polyester PBC50001H 26 5 Gallons (1) 5 Gallon Container • A Tough Brush That Will Last and Last Filament Can Be Used with Either Petroleum • Oriflo Flow-Through SKU 227558 99 or Water-Based Cleaning Solutions • Length: 9.75" (25 cm) Parts Washer Brush WWSHD-5G • Length: 10.25" (26 cm) 139 and High Quality Hose to Designed to Effectively Replace Connect to Your Parts Washer Hazardous Solvent in Water-Based Parts Washers • Concentrated to Be Powerful and to Save You Money EcoMaster Heated Aqueous EcoMaster Heated • Quickly Removes Grease, Oil, Carbon Portable Brake Washer Aqueous Parts Washer and Grime While Safe for the Technician SKU 479988 99 SKU 479983 99 FOU61840-02 999 FOU61330-02 1,449 • Heavy Duty Air Pump • Capacity: 45 Gallons Storm Ultra Spray • Heavy Duty Drum Dolly with Two Locking Casters • Heater Thermostatically Controlled Wash Solution and Two Regular Casters Preset to 110° F 5 Gallons (1) 5 Gallon Container • Prefilter Screen and Asbestos Sock Filter • Filter System Prolongs Fluid Life Designed to Ensure Clean Solution SKU 227559 99 • Heater: 1,000W - Thermostatically Molded Cart for EcoMaster WWSSU-5G 15 9 Controlled to Hold at 115° F Heated Aqueous Parts Washer • Professional Wash Solution for • Sink Dimensions: 24"(L) x 20"(W) x 7"(D) Heated Spray SKU 479985 99 Cabinet/Jet Cabinet Style Parts EcoMaster Aqueous FOU61332 249 Washing Equipment Portable Parts Washer • 500 Lbs. Capacity • Super Concentrated for Cost • High Density Polyethylene Effectiveness SKU 479987 99 Molded Tray • Quickly Blasts Away Grease, Oil, FOU61444-02 849 Carbon and Grime Glass Bead Coarse Glass Bead Medium Abrasive Blast Cabinet Media, 25 Lbs. Grit Media, 25 Lbs. (Bench Top) DID YOU SKU 010136 99 SKU 010139 99 SKU 300119 99 SHA13077 49 SHA13078 49 24815 159 • Ideal for Many Uses • Easily Remove Paint, Rust and KNOW? • Prevents Surface Rust Oxidation • Paint and Body Applications • Fits on Bench or Cabinet • For Use with OEM 24815 Abrasive • Dimensions: 19.3"(H) x ® Blast Cabinet 19.3"(W) AutoZone has instrument • Cubic Inches: 28.6" clusters available. Contact Your AutoZone Commercial Sales Manager for Details 60 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-298-6651. Contact Us: 1-877-AZTool1 Phone SHOP EQUIPMENT (1-877-298-6651) Hablamos Español Shop Press Shop Press Press Support 20 Ton Air/ Hydraulic 12 Ton Hydraulic Shop 20 Ton Shop Press Universal Press Support Shop Press with Gauge Press with Gauge SKU 300134 99 SKU 804487 99 BONUS SKU 544793 99 SKU 544790 99 24810 379 24809 229 • Includes Press Plates 24812 499 24811 349 • CNC Machined Anodized Aluminum Value: $99.99 • Includes Press Blocks • Remove and Install Bearings, • Includes Press Blocks Gears, U-Joints, Bushings, Ball Joints and Pulleys • Laser Etched Position Markings for Durability • Pressure Gauge • Pressure Gauge Provides • Multi-Position Bed for Work Height Adjustment • Black Oxide Coated Cr40 Steel Hardware Shop Press Pin Set Accurate Pressure Readings Provides Accurate • Max. Height: 31.5" SKU 544794 | PART# 24813 • Ram Moves Side to Side Pressure Readings for Versatility • Measurement Between • Max. Width: 21.75" • Measurement Between Uprights: 20” Uprights: 21 1/8” • Working Range Super Heavy Duty H-Frame Press Weighs Over 250 Lbs. • Working Range 0” - 36 1/8” 0” - 40 1/2” Stronger Compared to Similar Lighter Weight 21.75" Shop Presses on the Market DID YOU With Purchase of: 20 Ton Air/Hydraulic Shop Press w/ Gauge SKU 544793 | Part# 24812 KNOW? AutoZone® offers a full line of bulk replacement hose clamps Offer Good Through June 30, 2018 While Supplies Last Contact Your AutoZone Commercial Sales Manager for Details Vises Bearing Separators Bearing Splitter, 4-1/2" Light Duty Bench 4" Heavy Duty Bench Bearing Splitter, Vise with Swivel Base Vise with Swivel Base 1/2" to 4-5/8" 1/4" to 15/16" SAVE SKU 514006 SKU 751645 SKU 751643 99 99 24217 SKU 514005 99 27232 99 SAVE 49 27231 REG. $29.99 $10 59 19 • Razor Edges Wedge Between 29 • Machined Replaceable Steel Jaws • Thread of Tapped Holes in Parts and Securely Holds Tool 24216 $10 • Machined Anvil, Permanent Pipe Jaws Adapter: 5/16" - 18 • Thread of Tapped Holes in REG. $39.99 • Full 360º Swivel Base • Distance Between Adjusting Adapter: 5/8" - 18 Screws: 1-11/16" • Machined Replaceable • Clamping Strength: • Distance Between Adjusting Steel Jaws 200 Lbs. Screws: 4-3/8" • Machined Anvil, Permanent Pipe Jaws Offer Good Through June 30, 2018 - While Supplies Last • Full 360º Swivel Base • Clamping Strength: 100 Lbs. 5 Ton Bar-Type Puller/Bearing Bearing Splitter Combo Set Offer Good Through June 30, 2018 - While Supplies Last Separator Set SKU 087318 99 SKU 347218 99 OTC1183 349 6" Heavy Duty Bench Vise 27236 99 • Contains 4 of OTC's Most Popular with Swivel Base • Separator Tools are Used Splitters Plus a Pulley Pulling with Bar Puller Attachment in a Rugged Storage Case SKU 751654 99 and Legs for a Wide • Includes 1121,1122, 24218 89 Variety of Pulling Jobs 1123 and 1130 • Machined Replaceable Steel Jaws • Set Includes: 2" and 3" Bearing Splitters • Machined Anvil, Permanent Pipe Jaws Bearing Splitters, • Also Includes 679 (4) Sets of Hex Pulley Attachment • Full 360º Swivel Base Push-Puller Legs and a • Clamping Strength: 300 Lbs. Bar-Type Puller Head with a 9/16" Forcing Screw Vacuums Available via Outside Buy/EPO, Call 1-877-298-6651 for ordering instructions. Drill Presses 5 Gallon Stainless Steel Wet/Dry Kubota® 8 Gallon 5 Speed Bench Drill Press Wet/Dry Vacuum Vacuum Cleaner SKU 462480 99 SKU 912310 SKU OUTSIDE BUY/EPO 99 24825 99 KUB54102 129 BIG55274 69 99 • 1/2" Chuck Capacity • Wet & Dry Vacuum Cleaner • This 8 Gal Stainless Steel Vacuum is • 1/3 HP, 120V, 2.3 Amp Perfect for the Garage, House or Office • Provides Powerful Suction • 2" Stroke • Lock-On Hose System • Rugged Stainless Steel Construction • 620 - 3,100 RPM • Includes Accessories: 7 Ft. Flexible • Features (4) Casters for Easy Transport Hose, 2 Extensions Wands, Crevice • 8" Swing • Includes: (1) 5' Hose, (3) Extension Wands, (1) Nozzle, Sofa / Seat Brush, Floor
Load more

Recommended publications
  • Parts Cleaner Risk Assessment
    Tel: 1300 55 3001 | Fax: 07 3337 9981 | 14b Beachway Pde, Marcoola QLD 4564 [email protected] | www.haztek.com.au | ABN: 57 130 218 834 Company: Project: Parts Cleaner Risk Assessment Scope: Comparative Assessment for Selected Parts Cleaner Products Date of Review: 19th January 2012 HAZTEK Ref: 10674 Version: V2.2 Prepared by: Maurice Barnes Principal Consultant HAZTEK Pty Ltd Objective: To assess and compare the risks of exposure to selected parts cleaner products when cleaning materials. HAZTEK 10674 V2.2 i Parts Cleaner Risk Assessment TABLE OF CONTENTS PAGE Executive Summary .................................................................................................................. 1 1 Introduction ....................................................................................................................... 5 2 Methodology ..................................................................................................................... 5 3 References ......................................................................................................................... 7 4 Background ....................................................................................................................... 9 5 Hazardous Substance Risk Assessment ............................................................................ 9 5.1 Health Hazards .......................................................................................................... 9 5.2 Exposure Routes ......................................................................................................
    [Show full text]
  • Solvent Parts Cleaner Cm80
    INDUSTRIAL - SOLVENT PARTS CLEANER OPERATION & INSTRUCTION MANUAL CM80 ELECTRIC, AIR, AUTO LID I. Introduction A. Manufacturer’s Statement This manual will provide you with important information about the Solvent Parts Cleaners and will instruct you on how to use this equipment in a safe manner. The information contained in this manual is necessary for the safe, proper setup and operation of your Solvent Parts Cleaner. Keep this manual, along with the Material Safety Data Sheets (MSDS) for the solvent in use, within easy reach of the operator of this parts cleaner. The equipment described in this manual is subject to change. The manufacturer reserves the right to change equipment at any time as part of normal product improvement. Some improvements may have been made after this manual was printed. For the latest information on your equipment, contact the manufacturer. B. General Information CAUTION READ AND UNDERSTAND ALL LABELS, MSDS, AND THIS INSTRUCTION MANUAL BEFORE USE. The Industrial Solvent Parts Cleaner is an economical, safe, and innovative system designed to clean parts, using a mineral spirits based solvent. Solvents, when used to clean grease and oil, must be disposed of properly. Consult your local environmental management agency for additional guidance and other potentially hazardous materials compliance requirements. Install your parts cleaner on a flat, level surface in an area provided with adequate ventilation. Avoid repeated or prolonged breathing of vapors. Do NOT use compressed air to dry parts as this may cause a high concentration of vapors in the immediate area. Local exhaust ventilation should be used in areas of high vapor concentration.
    [Show full text]
  • Theory of Operation: How Parts Cleaning Works
    Theory of Operation: How Parts Cleaning Works MART defines the term to clean as to overpower the soils. The MART Parts Washer is a high-impact pressure, high-temperature, industrial water-based cleaning system that uses a combination of the following factors to achieve cleaning results: Power x Temperature x Chemical x Time = Clean The relationship of these variables can be varied in an infinite number of ways to achieve the same level of cleanliness. Your own needs determine the relative value of each variable. Keep in mind that the MART Parts Washer provides one of the highest blasting powers in the cleaning industry, allowing you to reduce the wash-cycle times for your parts to a minimum. Additionally, the high blasting power allows you to operate the washer at lower cleaning temperatures, thus saving energy, and using less chemical than spray washers The exact combination of the factors must be determined for your application, based on the types of soils to be removed, the degree of cleanliness required, the cycle time required, the types of parts to be cleaned, and so on. How the Parts Washer Works The parts washer operates on a timed cycle. The operator places the parts to be cleaned in the washer on the turntable, closes and latches the door, and then starts the timed cleaning cycle. During the cleaning cycle, a high-temperature, high-pressure, water-and-detergent cleaning solution blasts soils from the parts. After the cycle has stopped and the steam has exhausted, the operator removes the cleaned parts. The parts washer utilizes closed loop, waste minimization technology, continuously reusing its cleaning solution and effectively reducing pollution potential.
    [Show full text]
  • PWC (Parts Wash Cleaner)
    PWC (Parts Wash Cleaner) PWC is a clear blue liquid with a pleasant solvent odor. PWC is a blend of aliphatic solvents coupled with select oils and penetrants to provide rapid cleaning and excellent solvency. The flash point of PWC is 122°F (PMCC method). PWC is a 100% active blend designed to remove grease, oil and other common soils found on all automotive parts and industrial equipment. PWC is suited for a wide variety of parts cleaning systems and tanks. PWC is ready to use straight from the drum. Simply pour it into the fluid reservoir and you are ready to go. Although designed to use in parts washers, PWC works equally well in manual cleaning operations or it may be applied to spray or brush for cleaning larger parts. PWC has many advantages. Some of them are as follows: 1. Penetrates to provide fast cleaning of all types of petroleum soils. 2. Cleans faster than straight kerosene, naphtha or diesel fuel, leaving less residue. 3. Contains no emulsifiers to entrap incidental moisture and reduce solvency. 4. Select oils give maximum worker comfort by reducing drying effects of solvent on skin. 5. Requires no time consuming premixing, thus reducing cost. 6. Is safe on all metals as it contains no acids or alkalies. PWC can be used safely on aluminum, brass, copper and plated parts. Easy to Clean Low Maintenance As simple as 1 - 2 - 3! 1. Attach a hose to the spout of the parts washer and pump PWC from the parts washer into a bucket. 2. Empty dirty oily water and sludge into another container*.
    [Show full text]
  • The Biomatic® Parts Cleaning System Is…
    BIOMATIC® The Environmentally Friendly Bioremediation Parts Washer 1 The Biomatic® Parts Cleaning System Is… • A Bioremediation System. The Graymills Biomatic Parts Cleaning System uses the natural technology of microbial bioremediation to reduce oils, greases and other hydrocarbons introduced into the cleaning system to water and carbon dioxide (CO2). No oil and hydrocarbon buildup means the unit continues to clean parts indefinitely (we recommend cleaning the tank once a year, but the fluid can be put back in for continued use if desired.) • A Waste Minimization System. Talking to your customers about “waste minimization” will get their attention. With the Graymills Biomatic Parts Cleaning System, users will go from monthly dumping of fluid and unit cleanup…to once a year. That’s a “waste minimization” sales story few customers can resist. • A Tough Cleaner. Aqueous based Super Biotene® is pH neutral with a mild, pleasant odor. A mixture of emulsifiers and surfactants, they contain no VOCs, so they’re EPA and air quality friendly! Super Biotene cleans grease and grime off even the dirtiest parts, then the microbes go to work, reducing the hydrocarbon contaminants (oils, greases) to water and CO2. • A Good Investment. Recycling costs are slashed…parts cleaner waste is minimized…the dirtiest parts come clean…and the system is operator friendly. 2 How The Biomatic® Parts Cleaning System Works It is important to understand that the Biomatic® Parts Cleaning System is more than individual products - it is a total cleaning environment. The Biomatic Parts Cleaning System relies on the perfect balance between the Super Biotene® cleaning solution and the microbes introduced into the system.
    [Show full text]
  • Attachment 3 Preparedness and Prevention Plan
    AZ HWMA PERMIT ATTACHMENT 3 EPA ID NO. AZD981969504 PREPAREDNESS AND PREVENTION PLAN SAFETY-KLEEN CHANDLER FINAL PERMIT ATTACHMENT 3 PREPAREDNESS AND PREVENTION PLAN 3.0 Abstract 3.0.1 Security Measures The site is secured as follows: a. There is a barrier around the facility that includes a six-foot block wall topped with three strands of barbed wire around the back and sided of the facility. Along the front of the facility there is a six-block wall and two rolling steel gates topped with metal spikes instead of barbed wire. The gates are lockable. b. Warning signs are posted at all entrances. c. Locks are on all entrances to the warehouse. d. Controls for all tank operations are inside the office area. e. Site lighting is automatically controlled. 3.0.2 Inspection Procedures See Appendix E–4 (“Example Inspection Forms”). 3.0.3 Required Equipment The emergency equipment requirement is met with the following: a. Internal communications will be by voice and intercom. b. Telephones are available in the office return and fill area, and the warehouse. c. Fire extinguishers are available next to three exits in the warehouse. d. Water is available from the City of Chandler. There are four fire hydrants located on Frye Road between Beck Avenue and McKemy Avenue, in addition to a hydrant on the northwest corner of Frye Road and Beck Avenue. All of these hydrants are within 1000 feet of the service center and all meet City of Chandler requirements. The average flow rate is 1,200 – 1,400 gallons per minute, with a static pressure of 75 to 85 pounds per square inch gauge.
    [Show full text]
  • Clean Ozzyjuice Means Clean Parts
    ® OZZYMAT The SmartWasher® Bioremediating Parts Washing System is both self-cleaning and non-hazardous. Through the process of bioremediation the SMARTWASHER constantly maintains the cleanliness of the OZZYJUICE cleaning/degreasing solution without the need for hauling, skimming or evacuating the unit. WHAT IS OZZYJUICE®? OZZY ® OZZYJUICE is a powerful, aqueous based degreasing MICROBES Ozzy Ozzy ® Microbe solution that is pH-neutral, non-irritating, non-flammable, and non-toxic. Armed with superior cleaning capability, the OZZYJUICE solutions will match or surpass the performance of a premium solvent without all the associated risks. All HEATED OZZYJUICE OZZYJUICE solutions are certified by both NSF and AQMD. HEATING 300 GPH ELEMENT RECIRCULATING OZZY® MICROBES KEEP THE OZZYJUICE CLEAN AND STRONG. PUMP MODELS Microbes (OZZYS), introduced into the SMARTWASHER 14161 14145 14711 system through the OZZYMAT, eat the grease, oil and other contaminants, cleaning off the dirty parts, creating the harmless by-products of carbon dioxide and water. CLEAN OZZYJUICE MEANS CLEAN PARTS. SW-23 SW-25 SW-25C Mobile Parts/Brake Signature Parts Combo Brake/Parts Washer Washer Washer The OZZYJUICE cleaning/degreasing solution cleans the dirty 14144 14710 14162 parts and the OZZY microbes clean the OZZYJUICE leaving it strong and clean for every use. You should never need to haul away dirty parts cleaning fluid again, if the unit is maintained properly, and according to the operating instructions. Ozzy® SW-28 SW-28XE SW-37 ® Microbe Ozzy SuperSink Parts SuperSink XE Parts Mobile Heavyweight Washer Washer Parts Washer www.crcindustries.com/ei | 885 Louis Drive, Warminster, PA 18974, (PH) 800-272-4620 Copyright © 2015 ChemFree Corporation, a subsidiary of CRC Industries.
    [Show full text]
  • Hazardous Waste Self Audit
    Hazardous Waste Self Audit Section: Waste Parts Washer Solvent Section: Waste Parts Washer Solvent Self-Audit Refer to the tips, action steps and resources to help you complete the audit. Tips, Action Steps & Resources 1. Does your business have a petroleum-solvent-based and/or water-based (aqueous) parts washer? Yes, this business has a water-based (aqueous) parts washer. Stop here Identifying your parts washer — submit this form, and download, complete and submit the Section: If you are confused about what type of parts washer you have Water-Based (Aqueous) Parts Washer at www.hennepin.us/selfaudit. or have questions about how to Yes, this business has a petroleum-solvent-based parts washer. Go to complete the self audit, call 612 question 2. -348-3777 for assistance. Yes, this business has both a water-based (aqueous) parts washer and petroleum-solvent-based parts washer. Download and complete the For more information See Solvent-Based Parts Section: Water-Based (Aqueous) Parts Washer at www.hennepin.us/ Washer at selfaudit. Go to question 2. www.pca.state.mn.us/ No. Move on to the next section. publications/w-hw4-43.pdf. See Water-Based (Aqueous) 2. Do you only clean oily parts in your petroleum-solvent-based parts Parts Washer at washer? www.pca.state.mn.us/ Yes. Go to question 3. publications/w-hw4-44.pdf. No. List what is clean off of parts: ____________________________ ________________________________________________________ ________________________________________________________ 3. Does your solvent-based parts washer have a filter? Yes. Go to question 4. No. Go to question 5. 4. How do you manage used filters from your petroleum-solvent-based parts washer? I store and dispose of my used parts washer filters with my used oil filters (this is acceptable as long as you are only cleaning oil off of parts, are a Very Small Quantity Generator (VSQG) and have obtained permission from your used oil filter hauler to mix these wastes).
    [Show full text]
  • KLONDIKE Parts Washer Solvent
    SAFETY DATA SHEET KLONDIKE Parts Washer Solvent SECTION 1. IDENTIFICATION Product identifier used on the label KLONDIKE Parts Washer Solvent Product Code(s) : None reported. Recommended use of the chemical and restrictions on use : Industrial solvent. Use pattern:Professional Use Only Restriction on use: None known Chemical family : Petroleum distillates Name, address, and telephone number of the supplier: KLONDIKE Lubricants Corporation 3078 275th Street Langley, BC V4W 3L4 Canada General Information 1- 877-293-4691 www.klondikelubricants.com [email protected] SECTION 2. HAZARDS IDENTIFICATION Classification of the chemical Clear colourless liquid. Petroleum hydrocarbon odour. This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200) (Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015). Hazard classification: Flammable Liquids - Category 3 Skin Irritation - Category 2 Specific Target Organ Toxicity, Single Exposure - Category 3 narcotic effects Aspiration toxicity: Category 1 Label elements Hazard pictogram(s) Signal Word DANGER! Hazard statement(s) Flammable liquid and vapor. Causes skin irritation. May cause drowsiness and dizziness. May be fatal if swallowed and enters airways. Material name: KLONDIKE Parts Washer Solvent SDS US Version #: 01 Issue date: 02-18-2021 1 / 13 Precautionary statement(s) Keep away from heat, sparks and open flame. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical and ventilating equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing mist or vapours. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing.
    [Show full text]
  • Shop Guide for Dangerous Waste Management
    Shop Guide For Dangerous Waste Management Revised February 2010 Publication no. 09-04-015 Central Region Northwest Region 15 W Yakima Ave #200 3190 160th Ave SE Yakima WA 98902-3452 Bellevue WA 98008-5452 Eastern Region Southwest Region N 4601 Monroe PO Box 47775 Spokane WA 99205-1295 Olympia WA 98504-7775 Table of Contents Introduction .......................................................................................................... 1 Parts Washers ..................................................................................................... 1 Aerosol cans ....................................................................................................... 2 Shop Towels and Rags ........................................................................................ 3 Used Oil ............................................................................................................... 3 Spent Antifreeze .................................................................................................. 4 Light Bulbs and Ballasts ....................................................................................... 5 Batteries .............................................................................................................. 5 Paint Wastes ........................................................................................................ 6 Dangerous Waste Accumulation and Storage ...................................................... 8 Waste Containers ...............................................................................................
    [Show full text]
  • Graymills Parts Washer Catalog
    PARTS WASHER CATALOG : solvent : solvent/aqueous : aqueous : bioremediation : ultrasonic : cleaning fluids : accessories : custom systems : Graymills.com 1.888.GRAYMILLS Selecting the right parts washer Both your Graymills distributor and our factory staff are prepared to offer any assistance in selecting your parts cleaner. The more of the following information you furnish, the quicker— and more precisely—the appropriate parts washer can be selected. O Soils to be removed. O Current cleaning method used. O Material(s) from which your parts are manufactured. O Size, weight, configuration and quantity of the parts to be cleaned per day. O Operations immediately before and after cleaning. (e.g., “machine before/paint after.”) O Preferred method of handling: manual or automatic. O Single or multi-step cleaning required. O Type of cleaning fluid: solvent or water-based. Choosing your cleaning action GA GB GC GD SOAK BRUSH DIRECTED HIGH STREAM PRESSURE SPRAY Soaking is the simplest, Manual brushing is used A flexible hose is used to Quick and effective cleaning least aggressive cleaning as a supplement to other direct a flushing stream of is accomplished by a action. It is more effective cleaning actions. This low pressure cleaning fluid powerful spray of heated, with longer immersion method is helpful in directly at the soiled part. water-based cleaning time. This cleaning action removing stubborn soils This cleaning action is solution. The high pressure is applicable where soils in hard to reach places. particularly effective for spray blasts away the are easily removed and An assortment of parts flushing parts when brushing. toughest deposits without where low equipment cleaning brushes is available For maximum results, the damaging precision parts.
    [Show full text]
  • Reporting Emissions from Surface Coating and Solvent Cleaning
    Maricopa County Air Quality Department Phone: 602-506-6790 Email: [email protected] Maricopa.gov/AQ Reporting Emissions from Surface Coating and Solvent Cleaning Emissions Inventory Help Sheet Maricopa County Air Quality Department December 2020 Reporting Emissions from Surface Coating and Solvent Cleaning What to Report Facilities that perform surface coating or solvent cleaning must report volatile organic compound (VOC) emissions if 15 gallons or more of aggregate VOC containing materials were used during the reporting year. Report VOC containing materials, such as: • Paints, primers, sealers, coatings, thinners, reducing solvents • Paint gun cleaner (gun wash) • Body filling compound (such as Bondo) if it contains VOC • Cleaning solvents used on rags or in a device, such as a parts washer • Spray cleaners (16 oz equals one pound (lb) – reportable if you used 100 lb or more) • Spray lubricants, such as WD-40 • Gasoline storage tank emissions (See Help Sheet for Fuel Storage and Handling available at maricopa.gov/5628) Do not report: • Acetone • Paints and solvents that have no VOC content • Motor or transmission oils • Brake or windshield fluids Particulate matter (PM) emissions, including PM primary and PM10 primary from surface coating should be reported if there is a PM limit in the facility permit. PM primary refers to all particulate matter emissions (filterable and condensable) from an emissions process. PM10 primary refers to all PM primary that measures less than 10 microns in diameter. PM10 primary is a subset of PM primary. How to Report This help sheet shows emissions inventory preparers how to accurately report emissions from surface coating and solvent cleaning operations in the AQD Online Portal.
    [Show full text]