DOCSLIB.ORG

2.0L Turbo for Cadillac ATS Makes Best Engines List

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2.0L Turbo for Cadillac ATS Makes Best Engines List General Motors GM Communications Oshawa, Ontario of Canada Limited media.gm.ca For Immediate Release: Wednesday, Dec. 13, 2012 2.0L Turbo for Cadillac ATS Makes Best Engines List Four-cylinder recognized by WardsAuto World as industry leader DETROIT – The 2.0L turbo I-4 engine that powers the all-new Cadillac ATS is one of WardsAuto.com 2013 “10 Best Engines” for North America. The 2.0L turbo’s 272 horsepower is the highest specific output of any GM production engine, and at 136 hp per litre, is the most power-dense engine certified by the Society of Automotive Engineers. “The 2.0L turbo 4-cylinder is a stout performer that impressed all the WardsAuto editors,” said Tom Murphy, executive editor of WardsAuto.com. “It muscled its way back into the winners’ circle with remarkable horsepower per litre, and the engineers deserve kudos for reducing engine friction some 16 percent, which means it runs smoother and more efficiently.” Murphy added, “This engine gets four mpg better on the highway than the earlier version did a year ago in the Buick Regal GS, a former Ward’s 10 Best Engines honouree. That’s impressive. If the ATS can nibble into the market share of well-established German brands, the 2.0L turbo should get most of the credit.” ATS’s lightweight and aerodynamic design allows it to accelerate from 0-96 km/h in 5.9 seconds when equipped with the 2.0L turbo engine, while delivering fuel consumption rating of 9.9 L/100km City and 6.3 L/100km Highway. Ward’s reviewed 40 engines from 16 automakers in this year’s competition. Winners were chosen based on several factors, including power, fuel efficiency, new technology, refinement, and comparative data for similar engines. The 2.0L turbo engine includes the latest in technology combinations. “Benchmark efficiency and refinement were our top priorities when developing the all-new 2.0L turbo,” said Mike Anderson, global chief engineer for Ecotec engines. “The team was focused on using technology to reduce friction and engine noise and also managed to take specific output to a new level.” Among the 2.0L turbo engine’s highlights: a direct-injection twin-cam, four-valve-per-cylinder engine with continuously variable valve timing; twin-scroll turbocharger with air-to-air intercooler; forged-steel crankshaft with modular balance shaft system; and a two-stage variable-displacement oil pump with jet-spray piston cooling. The 2.0L turbo has a wide torque curve, delivering 90 percent of its peak 260 lb-ft. of torque (353 Nm) from 1,500 rpm to 5,800 rpm – giving the ATS the feeling of immediate power, whether from launch at a stop light or during higher-speed manoeuvres, such as passing. The new 2.0L turbo engine is also used on the Chevrolet Malibu and is built in Tonawanda, N.Y. The 2.0L turbo ATS is priced at $36,985, plus destination charges and offers automatic and manual transmissions, and rear- or all-wheel drive. ATS also is available with a standard 2.5L four-cylinder, and a 3.6L V-6 is available. About Cadillac in Canada Cadillac has been a luxury automotive manufacturer since 1902 and has a prestigious history of safety and technology innovation. This legacy continues today as Cadillac engineers and builds technologically advanced, dramatically styled vehicles with a reputation for luxury, performance and quality. More information on Cadillac can be found at www.cadillac.ca. .
Load more

Recommended publications
  • Commercial Medium- and Heavy-Duty Truck Fuel Efficiency Technology Study – Report #1 DISCLAIMER
    DOT HS 812 146 June 2015 Commercial Medium- and Heavy-Duty Truck Fuel Efficiency Technology Study – Report #1 DISCLAIMER This publication is distributed by the U.S. Department of Transportation, National Highway Traffic Safety Administration, in the interest of information exchange. The opinions, findings, and conclusions expressed in this publication are those of the authors and not necessarily those of the Department of Transportation or the National Highway Traffic Safety Administration. The content is not intended to be used for determination of federal grant programs. The United States Government assumes no liability for its contents or use thereof. If trade or manufacturers’ names or products are mentioned, it is because they are considered essential to the object of the publication and should not be construed as an endorsement. The United States Government does not endorse products or manufacturers. Suggested APA Format Citation: Reinhart, T. E. (2015, June). Commercial medium- and heavy-duty truck fuel efficiency technology study - Report #1. (Report No. DOT HS 812 146). Washington, DC: National Highway Traffic Safety Administration. TECHNICAL REPORT DOCUMENTATION PAGE 1. Report No. 2. Government Accession No. 3. Recipient's Catalog No. DOT HS 812 146 4. Title and Subtitle 5. Report Date Commercial Medium- and Heavy-Duty Truck Fuel Efficiency June 2015 Technology Study – Report #1 6. Performing Organization Code 7. Author(s) 8. Performing Organization Report No. Thomas E. Reinhart, Institute Engineer SwRI Project No. 03.17869 9. Performing Organization Name and Address 10. Work Unit No. (TRAIS) Southwest Research Institute 6220 Culebra Rd. 11. Contract or Grant No. San Antonio, TX 78238 GS-23F-0006M/DTNH22- 210.522.5876 12-F-00428 12.
    [Show full text]
  • Lotus and Eaton's Electrohydraulic Closed-Loop Fully Variable Valve Train System
    J.W.G. Turner and S.A. Kenchington Lotus Engineering, Norwich, UK D.A. Stretch Eaton Automotive, Southfield, Michigan, USA Production AVT Development: Lotus and Eaton's Electrohydraulic Closed-Loop Fully Variable Valve Train System Entwicklung eines Serien-AVT-Systems: Lotus’ und Eatons elektrohydraulischer voll variabler Ventiltrieb (AVT) 1. Introduction Lotus and Eaton are collaborating to bring a production closed loop control Fully Variable Valve Timing system, known as Active Valve Train (AVT), to market in the 2008-9 timeframe. The system uses electrohydraulic operation, movement of the engine poppet valves being initiated by oil flow into and out of a hydraulic chamber which is controlled by fast acting electrohydraulic servo valves developed by the two companies. This in turn allows infinitely variable timing, duration and lift. The system, which is currently being engineered in prototype form for an OEM, will allow ready application of many advanced engine control strategies, such as throttleless operation, Controlled Auto Ignition (or Homogeneous Charge Compression Ignition), fast start, variable firing order, differential cylinder loading and ultimately air hybridisation. However, to gain acceptance in the marketplace, the two partners understand that productionisation must not come at the expense of high Bill Of Materials cost, and in controlling that requirement, the performance of the system must not be allowed to suffer. This paper relates the present developmental status of the system from a valve control standpoint and describes some of the design features which have been adopted to fulfil the above requirements. An estimate of BOM costs for a typical light duty automotive application is also given.
    [Show full text]
  • For Immediate Release CADILLAC ATS SEDAN Vehicle Highlights
    For immediate release CADILLAC ATS SEDAN Vehicle Highlights: All-new, lightweight, rear-wheel-drive architecture with one of the lowest curb weights in the segment – less than 3,400 pounds (1,542 kg) Broad lineup of engines, including two four-cylinders and a V-6 for North America, capitalizes on lightweight structure for performance with efficiency Cadillac CUE, a comprehensive, in-vehicle experience that merges intuitive design with auto industry-first controls and commands for information and entertainment data 2013 CADILLAC ATS CHALLENGES THE WORLD’S BEST COMPACT LUXURY CARS The all-new 2013 Cadillac ATS compact luxury sports sedan is the brand’s entry into the world’s most significant luxury car segment and is designed to challenge the world’s best premium cars. Its sophisticated driving experience is enhanced with Cadillac CUE, a comprehensive, in-vehicle user experience that merges intuitive design with industry-first controls and commands for information and media data. Developed on an all-new, lightweight rear-drive architecture, the ATS reflects a new expression of Cadillac’s Art & Science execution philosophy, centered on a foundation of driving dynamics and mass efficiency. It is the most agile and lightweight Cadillac, with one of the lowest curb weights in the segment – less than 3,400 pounds (1,542 kg). All-wheel drive is available. Germany’s famed Nürburgring served as one of the key testing grounds, along with additional roads, race tracks and laboratories around the globe, where ATS engineers balanced performance with
    [Show full text]
  • CTS-V with Supercharged 6.2L V-8 Engine SAE-Certified at 640 Hp
    2016 CADILLAC CTS New for 2016: • CTS-V with supercharged 6.2L V-8 engine SAE-certified at 640 hp (see separate CTS-V release for complete details) • All-new 3.6L direct injection V-6 engine with Active Fuel Management (cylinder deactivation) and fuel-saving Stop/Start technology • Fuel-saving Stop/Start technology included on the 2.0L Turbo engine • New eight-speed automatic transmission (8L45) matched with the 3.6L V-6 and 2.0L Turbo engine • Surround Vision 360-degree camera system • New 18-inch wheel design • Cadillac CUE enhancements, including phone integration capability – with Apple CarPlay and Android Auto compatibility (Android Auto capability to be offered later in the 2016 model year) • New premium exterior colors: Cocoa Bronze Metallic, Moonstone Metallic, Stellar Black Metallic • Revised interior color and trim combinations 2016 CADILLAC CTS SEDAN OFFERS NEXT-GEN 3.6L V-6 ENGINE AND ALL- NEW EIGHT-SPEED PADDLE-SHIFT AUTOMATIC TRANSMISSION The centerpiece of Cadillac’s expanded and elevated portfolio, the midsize CTS is the fullest realization of the brand’s transformation and a compelling blend of performance and luxury. The 2016 edition of CTS features significant enhancements in performance, efficiency and connectivity. The CTS is lighter than its primary competitors, enabling the most agile driving dynamics in the class, and its range of power-dense powertrains underpins its performance. A roomy, driver- centric cockpit interior with integrated technology through Cadillac CUE and hand-crafted appointments complements the exterior and supports the CTS sedan’s driving experience. Eight interior environments are offered, each trimmed with authentic wood or carbon fiber.
    [Show full text]
  • Technological Improvements to Automobile Fuel
    -_ . _I I I. I*. -\ r -1 ’ ,, . f ._,. .. 1 REPORT NO. DOT-TSC-OST-74-39. IIA I I Ii ’i ‘ TECHNOLOGICAL IMPROVEMENTS I 1, r TO AUTOMOBILE FUEL CONSUMPTION ~ Volume II A: Sections 1 through 23 i- I -- - I’ r C. W, Coon et a1 \ ’ j *I DECEMBER 1974 -”= I 1 FINAL REPORT iI - I DOCUMENT IS AVAILABLE TO THE PUBLIC ~ This document is THROUGH THE NATIONAL TECHNICAL ~ PUBLICLY INFORMATION SERVICE, SPRINGFIELD, ,- I RELEASABLE VIRGINIA 22161 1 I ” <._ I I I .- - Prepared- for ! U I S I DEPARTMENT OF TRANSPORTAT 1014 OFFICE THE SECRETARY Office of the AssistantOF Secretary for Systems i i Development and Technology ’ Washington DC 20590 and U I SI EfJVI ROFJrlENTAL PROTECTIOM AGENCY I Ann Arbor MI 48105 1 ! I eflSl”RlBU”r0N OF THIS DOCUMENT IS CINC\MITED i ." i NOT I CE This document is disseminated under sponsorship of the Department of Transportation and Environmental Protection Agency in the interest of {nformation exchange. The United States Government assumes no for liability its contents or use thereof.I/ I ~ NOTICE The United States Government does not jlendorse products ' or manufacturers. Trade or manufactu5ers' names appear herein solely because they are /[considered essential to the object of this report. I ll > ': DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.
    [Show full text]
  • Unimog Implement Carrier Bluetec 6 Technical Manual
    Unimog Implement Carrier BlueTec 6 Technical Manual February 2014 issue Technical Manual Technical Manual for Unimog Implement Carrier BlueTec 6 This Technical Manual serves as an advisory reference document for Part A Unimog Sales. Besides the basic vehicle version, special equipment Concept and sales reasoning is also listed. Regarding the availability of standard and special equipment, please refer to the applicable price lists. Subject to technical modifications without notice. All rights reserved. Reprinting or reproduction in electronic form, including excerpts, is prohibited and requires the approval of Mercedes-Benz Special Trucks. Part B Technical data The latest changes and additions are available through our updates on the Extranet at: www.specialtrucks-extranet.com By the copy deadline only a few application pictures of the Unimog Implement Carrier BlueTec 6 were available. Therefore pictures of the BlueTec 5 generation were used. Pictures depicting the BlueTec 5 generation are designated '(BlueTec 5)' in the caption. All other pictures show the new Unimog Implement Carrier BlueTec 6. Daimler AG Mercedes-Benz Special Trucks Sales & Marketing February 2014 issue Mercedes-Benz Special Trucks 1 Contents Technical Manual Contents: Part A (Concept and sales reasoning) Overview of models and components ................................ 4 Axles ..................................................................................... 34 Portal axles ....................................................................... 34 Product concept
    [Show full text]
  • Minimization of Torque Deviation of Cylinder Deactivation Engine Through 48V Mild-Hybrid Starter-Generator Control
    sensors Article Minimization of Torque Deviation of Cylinder Deactivation Engine through 48V Mild-Hybrid Starter-Generator Control Hyunki Shin 1 , Donghyuk Jung 2 , Manbae Han 3,* , Seungwoo Hong 4 and Donghee Han 4 1 Eco-Vehicle Control Design Team, Hyundai KEFICO Corporation, Gunpo 15849, Korea; hyunki.shin@hyundai-kefico.com 2 Department of Automotive Engineering, Hanyang University, Seoul 04763, Korea; [email protected] 3 Department of Mechanical and Automotive Engineering, Keimyung University, Daegu 42601, Korea 4 Research & Development Division, Hyundai Motor Company, Hwaseong 18280, Korea; [email protected] (S.H.); [email protected] (D.H.) * Correspondence: [email protected] Abstract: Cylinder deactivation (CDA) is an effective technique to improve fuel economy in spark ignition (SI) engines. This technique enhances volumetric efficiency and reduces throttling loss. However, practical implementation is restricted due to torque fluctuations between individual cylinders that cause noise, vibration, and harshness (NVH) issues. To ease torque deviation of the CDA, we propose an in-cylinder pressure based 48V mild-hybrid starter-generator (MHSG) control strategy. The target engine realizes CDA with a specialized engine configuration of separated intake manifolds to independently control the airflow into the cylinders. To handle the complexity of the combined CDA and mild-hybrid system, GT-POWER simulation environment was integrated with a SI turbulent combustion model and 48V MHSG model with actual part specifications. The combustion model is essential for in-cylinder pressure-based control; thus, it is calibrated with actual Citation: Shin, H.; Jung, D.; Han, M.; engine experimental data. The modeling results demonstrate the precise accuracy of the engine Hong, S.; Han, D.
    [Show full text]
  • Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine with No Or Limited Degradation in Vehicle Level Metrics
    2013 DOE Vehicle Technologies Program Review Advanced Gasoline Turbocharged Direct “Advancing The Technology” Injection (GTDI) Engine Development Corey E. Weaver Ford Research and Advanced Engineering 05/17/2013 Project ID: ACE065 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Indemnification By submitting a presentation file to Alliance Technical Services, Inc. for use at the U.S. Department of Energy’s (DOE’s) Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review Meeting, and to be provided as hand-out materials, and posting on the DOE’s website, except for employees of the Federal Government and DOE laboratory managing and operating contractors, the presentation authors and the organizations they represent agree to defend, indemnify and hold harmless Alliance Technical Services, Inc., its officers, employees, consultants and subcontractors; the National Renewable Energy Laboratory; the Alliance for Sustainable Energy, LLC, Managing and Operating Contractor of the DOE’s National Renewable Energy Laboratory; and the DOE from and against any and all claims, losses, liabilities or expenses which may arise, in whole or in part, from the improper use, misuse, unauthorized use or disclosure, or misrepresentation of any intellectual property claimed by others. Such intellectual property includes copyrighted material, including documents, logos, photos, scripts, software, and videos or animations of any type; trademarks; service marks; patents; and proprietary, or confidential information. Employees of Federal Government agencies and DOE laboratory managing and operating contractors collectively represent and warrant that they have acquired the rights and/or permission for use of all intellectual property, as listed above and claimed by others, that is needed for developing and submitting a presentation file to Alliance Technical Services, Inc.
    [Show full text]
  • Gasoline Engines
    GASOLINE ENGINES HEVs, a higher compression ratio and other refinements 1 Introduction have achieved a maximum thermal efficiency of 41%. In In 2017, the movement to promote the electrification of engines for conventional vehicles higher efficiency natu- powertrains intensified in various countries. In Europe, rally aspirated (NA) engines and downsized turbo- France and the U.K. announced a policy to ban sales of charged engines are being introduced. Moreover, the in- gasoline and diesel vehicles in 2040. In the U.S., notwith- troduction of mass production for the variable standing the birth of the Trump administration led to a compression ratio and compression ignition combustion, withdrawal from the Paris Agreement and a revision of considered difficult to mass produce until now despite the fuel economy regulations, stricter zero emission vehi- the high degree of fuel consumption decrease effective- cle (ZEV) regulations were set for 2018 in California and ness these engines exhibit. other states, and demand for electric vehicles is rising. 2. 2. Trends of Each Manufacturer Even the emerging country of China has introduced reg- Table 1 presents a list of the new engine launched or ulations mandating that 10% of production and sales in announced by the various Japanese manufacturers in 2019 consist of new energy vehicles (NEVs). Under these 2017, and an overview of the engines is presented below circumstances, one automaker after another announced (including engines by Japanese manufacturers launched policies to advance electrification. Nevertheless,
    [Show full text]
  • Service Bulletin INFORMATION
    File in Section: - Bulletin No.: 16-NA-112 Service Bulletin Date: April, 2016 INFORMATION Subject: 2016 Cadillac CT6 New Model Features Attention: United States, Canada and Mexico. This Bulletin also applies to Export vehicles. Export Countries Include: Europe, Israel, Japan, South Korea, Russia, Saudi Arabia. Model Year: VIN: Brand: Model: Engine: Transmission: From: To: From: To: Gasoline, 4 CYL, L4, 2.0L, SIDI, DOHC, VVT, DCVCP, TURBO Hydra-Matic CHARGED — 8L45, Auto- RPO LTG matic 8-Speed Transmission Gasoline, 6 — RPO M5N Cadillac CT6 2016 2016 All All CYL, V6, 3.0L, DI, DOHC, VVT, Hydra- Matic TWIN TURBO 8L90, Auto- CHARGED — matic 8-Speed RPO LGW Transmission — RPO M5X Gasoline, 6 CYL, V6, 3.6L, DI, DOHC, VVT — RPO LGX Copyright 2016 General Motors LLC. All Rights Reserved. Page 2 April, 2016 Bulletin No.: 16-NA-112 Overview 4468967 Vehicle Highlights Bulletin Purpose Some of the vehicle highlights are: This is a special bulletin to introduce the 2016 Cadillac The CT6 base engine is a responsive 2.0L (1,998 cc), CT6. The purpose of this bulletin is to help the Service sending 265 horsepower (198 kW) @ 5,500 RPM Department Personnel become familiar with some of (Estimate) and 295 lb-ft (400 Nm) @ 3,000 - 4,300 RPM the vehicle’s new features and to describe some of the (Estimate) to the rear wheels with Engine Auto STOP/ action they will need to take to service this vehicle. START technology. The all-new V6 3.0L Twin Turbo is designed to achieve Trim Levels segment-leading thresholds of refinement and specific The 2016 CT6 is available in three trim levels, output.
    [Show full text]
  • Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine Development
    2014 DOE Vehicle Technologies Program Review Advanced Gasoline Turbocharged Direct “Advancing The Technology” Injection (GTDI) Engine Development Corey E. Weaver Ford Research and Advanced Engineering 06/19/2014 Project ID: ACE065 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Overview Timeline Barriers Project Start 10/01/2010 Gasoline Engine Thermal Efficiency Project End 12/31/2014 Gasoline Engine Emissions Completed 76% Gasoline Engine Systems Integration Total Project Funding Partners DOE Share $15,000,000. Lead Ford Motor Company Ford Share $15,000,000. Support Michigan Technological Funding in FY2013 $ 4,911,758. University (MTU) Funding in FY2014 $ 2,428,972. 2 Relevance Ford Motor Company has invested significantly in Gasoline Turbocharged Direct Injection (GTDI) engine technology in the near term as a cost effective, high volume, fuel economy solution, marketed globally as EcoBoost technology. Ford envisions further fuel economy improvements in the mid & long term by further advancing the EcoBoost technology. Advanced dilute combustion w/ cooled exhaust gas recycling & advanced ignition Advanced lean combustion w/ direct fuel injection & advanced ignition Advanced boosting systems w/ active & compounding components Advanced cooling & aftertreatment systems 3 Objectives Ford Motor Company Objectives: Demonstrate 25% fuel economy improvement in a mid-sized sedan using a downsized, advanced gasoline turbocharged direct injection (GTDI) engine with no
    [Show full text]
  • Geometric Parameter Design of a Multiple-Link Mechanism For
    Downloaded from SAE International by Shugang Jiang, Wednesday, March 19, 2014 07:57:45 PM Geometric Parameter Design of a Multiple-Link 2014-01-1627 Mechanism for Advantageous Compression Ratio and Published 04/01/2014 Displacement Characteristics Shugang Jiang and Michael H. Smith A&D Technology Inc. CITATION: Jiang, S. and Smith, M., "Geometric Parameter Design of a Multiple-Link Mechanism for Advantageous Compression Ratio and Displacement Characteristics," SAE Technical Paper 2014-01-1627, 2014, doi:10.4271/2014-01- 1627. Copyright © 2014 SAE International Abstract combustion efficiency at all engine speed and load conditions, realizing better engine performance, lower fuel consumption, Variable compression ratio and variable displacement and lower exhaust emissions. Variable stroke and technologies are adopted in internal combustion engines consequently variable displacement is also a desired feature because these features provide further degrees of freedom to [8, 9, 10, 11, 12, 13]. For fixed displacement engines, the load optimize engine performance for various operating conditions. variation is usually handled by throttling the intake air. For a This paper focuses on a multiple-link mechanism that realizes variable displacement engine, when engine load demand variable compression ratio and displacement by varying the decreases, the displacement is decreased to at least partially piston motion, specifically the Top Dead Center (TDC) and take care of the need. With less throttling and decreased Bottom Dead Center (BDC) positions relative to the crankshaft. stroke, the pumping loss and frictional loss are reduced, which It is determined that a major requirement for the design of this is advantageous for fuel economy. Variable displacement also mechanism is when the control action changes monotonically provides the potential for improved exhaust emissions.
    [Show full text]