DOCSLIB.ORG

Single, Dual & Quad PCI-X Host Adapter Product Brief

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Single, Dual & Quad PCI-X Host Adapter Product Brief LSI7002XP Fibre Channel: Single, Dual, & Quad PCI-X Host Adapters KEY APPLICATIONS •Storage Area Networks (SANs) • Server to storage interconnect • SAN clustering FEATURES •One, two, four independent, 2 Gbit/s channels (Up to MAXIMIZE YOUR THROUGHPUT WITH LSI LOGIC’S INDUSTRY 400 MBps, full duplex) LEADING PCI-X, 2 GBIT/S FIBRE CHANNEL ADAPTERS •Auto-negotiation for legacy Designed for data mining, video and media streaming, and high availability connect (1 or 2 Gbit/s) applications, LSI Logic’s family of PCI-X, 64-bit, 133 MHz Fibre Channel host adapters provides industry-leading 2 Gbit/s Fibre Channel perform- • 64 bit/133 MHz PCI-X bus ance for high band-width applications and offers total bus throughput. (backward compatible with 32-bit and 33/66 MHz buses) LSI Logic’s LSI7402XP quad port PCI-X host adapter incorporates two LSIFC929X dual channel 2Gbit/s Fibre Channel controller devices, and a • SFP, multi-mode optics, 133 MHz PCI-X bridge chip. LSI Logic’s LSIFC929X, the highest performance LC connector dual channel controller available, incorporates LSI Logic’s Fusion-MPT architecture for maximum performance with minimum host overhead. The • Supports target mode and LSI7402XP maximizes your only PCI-X slot and offers increased connectivity SCSI initiator concurrently by offering four independent fibre channels on one host bus adapter. •FC-Tape support LSI Logic also offers the LSI7202XP dual channel, 2Gbit/s PCI-X host • Software supports switch and adapter and the LSI7102XP single channel, 2Gbit/s PCI-X host adapter. loop (private and public) Both host bus adapters are designed in the Low Profile PCI form factor making topologies them the right choice for 1U and 2U rackmount and standard servers. LSI Logic’s PCI-X host adapter family supports switched fabric, arbitrated • SNIA HBA API compliant loop and point to point topologies. Drivers for all major operating systems •CIM based server management are available at http://www.storageio.lsilogic.com. • Supports all major LSI7002XP FAMILY ORDERING INFORMATION operating systems LSI7402XP-LC Quad port, LC, SFP, multi-mode optics LSI7202XP-LC Dual port, LC, SFP, multi-mode optics • Fusion-MPT™ architected LSI7102XP-LC Single port, LC SFP, multi-mode optics •5 year limited warranty LSI7002XP Fibre Channel: Single, Dual, & Quad PCI-X Host Adapters FUSION-MPT ARCHITECTURE For more information please visit Based on industry standard ARM® technology, the LSI Logic 2 Gbit product the LSI Logic web site at: family incorporates Fusion-MPT architecture, a single binary device driver for http://storageio.lsilogic.com Fibre Channel, SCSI and emerging interface technologies such as InfiniBand, LSI Logic Corporation Serial ATA and others. Thinner drivers allow for better and more versatile North American Headquarters performance while adding value at the firmware level. Fusion-MPT provides Milpitas, CA ™ the flexibility and rich feature set to make options like Integrated Mirroring Tel: 866 574 5741 possible for boot volume protection at no additional cost. Host Adapter Group Technical Specifications Southborough, MA Data Transfers 400 MBps per channel, full-duplex Tel: 888 429 0425 Protocols SCSI, IP FAX: 508 485 0303 Topology Point-to-point, arbitrated loop, switched fabric (FL-port, F-port) Class of Service Class 2, Class 3 LSI Logic Europe Ltd. OS Support Windows NT4.0, Windows 2000, Solaris X86, SPARC, Linux, Novell European Headquarters NetWare, UnixWare United Kingdom Compliance ANSI Fibre Channel Standards: FC-PH, FC-AL2, FC-FCP, FC-PLDA, Tel: 44 1344 426544 FC-FLA, FCA-IP, IETF-IPFC, FC-Tape, PCI-X 1.0, PCI 2.2, and 99 compliant Fax: 44 1344 481039 Size 6.875” x 4.2”: LSI7402XP 6.6” x 2.53”: LSI7102XP and LSI7202XP LSI Logic KK Headquarters PCI Form Factor Short card PCI 2.2: LSI7402XP Tokyo, Japan Low profile PCI2.2, MD2: LSI7102XP and LSI7202XP Tel: 81 3 5463 7165 PCI Bus 64-bit, 133 MHz max (backwards compatible with 32-bit, 66 MHz buses) Fax 81 3 5463 7820 PCI Modes Bus Master DMA PCI Card Type LSI7402XP: 3.3 V add in card (3.3 V signaling) ISO 9001 Certified LSI7102XP, LSI7202XP: Universal add in card (3.3 V and 5 V signaling) The LSI Logic logo design, Fusion-MPT and Integrated PCI Voltage 3.3 V ±5% Mirroring are trademarks or registered trademarks of PCI Power 15 W/7.5 W (depending on board type) LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies. Bracket Standard height External Connectors LC, multi-mode optics, SFP LSI Logic Corporation reserves the right to make changes to any products and services herein at Agency Approvals CE, VCCI, Canada, C-Tick, FCC class B, UL 94VO any time without notice. LSI Logic does not assume Environments Operating Storage any responsibility or liability arising out of the application or use of any product or service described Temperature 0°C to 55°C -40°C to +105°C herein, except as expressly agreed to in writing Relative Humidity 5 to 90% non-condensing 5 to 90% non-condensing by LSI Logic; nor does the purchase, lease, or use of a product or service from LSI Logic convey Max Dew Point +32°C a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or of third parties. Copyright ©2002 by LSI Logic Corporation. All rights reserved. Order No. S20099 12/02-1.5M – Printed in USA 2.
Load more

Recommended publications
  • Rocketraid 2224 SATAII Host Adapter User's Guide
    RocketRAID 2224 SATAII Host Adapter User’s Guide Revision: 1.0 Date: August 2005 HighPoint Technologies, Inc. HighPoint Technologies, Inc. Copyright Copyright © 2005 HighPoint Technologies, Inc. This document contains materials protected by International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted or transcribed in any form and for any purpose without the express written permission of HighPoint Technologies, Inc. Trademarks Companies and products mentioned in this manual are for identification purpose only. Product names or brand names appearing in this manual may or may not be registered trademarks or copyrights of their respective owners. Backup your important data before using HighPoint's products and use at your own risk. In no event shall HighPoint be liable for any loss of profits, or for direct, indirect, special, incidental or consequential damages arising from any defect or error in HighPoint's products or manuals. Information in this manual is subject to change without notice and does not represent a commitment on the part of HighPoint. Notice Reasonable effort has been made to ensure that the information in this manual is accurate. HighPoint assumes no liability for technical inaccuracies, typographical, or other errors contained herein. ii HighPoint Technologies, Inc. Table of Contents ABOUT THIS GUIDE ............................................................................................................ 1 INTRODUCING THE ROCKETRAID 2224 HOST ADAPTER...............................
    [Show full text]
  • HP A5150A PCI Dual Port Ultra2 SCSI Host Bus Adapter
    HP A5150A PCI Dual Port Ultra2 SCSI Host Bus Adapter Service and User Guide Edition 2 Customer Order Number: A5150-90001 Manufacturing Part Number: A5150-96002 E0201 U.S.A. © Copyright 2001, Hewlett-Packard Company. Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Warranty. A copy of the specific warranty terms applicable to your Hewlett-Packard product and replacement parts can be obtained from your local Sales and Service Office. Restricted Rights Legend. Use, duplication or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 for DOD agencies, and subparagraphs (c) (1) and (c) (2) of the Commercial Computer Software Restricted Rights clause at FAR 52.227-19 for other agencies. HEWLETT-PACKARD COMPANY 3000 Hanover Street Palo Alto, California 94304 U.S.A. Use of this manual and flexible disk(s) or tape cartridge(s) supplied for this pack is restricted to this product only. Additional copies of the programs may be made for security and back-up purposes only. Resale of the programs in their present form or with alterations, is expressly prohibited.
    [Show full text]
  • Sun Storedge PCI/PCI-X Dual Ultra320 SCSI Host Adapter Installation Guide • January 2007 Preface
    Sun StorEdge™ PCI/PCI-X Dual Ultra320 SCSI Host Adapter Installation Guide Sun Microsystems, Inc. www.sun.com Part No. 817-5827-13 January 2007, Revision A Submit comments about this document at: http://www.sun.com/hwdocs/feedback Copyright 2007 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Sun Microsystems, Inc. has intellectual property rights relating to technology that is described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. patents listed at http://www.sun.com/patents and one or more additional patents or pending patent applications in the U.S. and in other countries. This document and the product to which it pertains are distributed under licenses restricting their use, copying, distribution, and decompilation. No part of the product or of this document may be reproduced in any form by any means without prior written authorization of Sun and its licensors, if any. Third-party software, including font technology, is copyrighted and licensed from Sun suppliers. Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in the U.S. and in other countries, exclusively licensed through X/Open Company, Ltd. Sun, Sun Microsystems, the Sun logo, AnswerBook2, docs.sun.com, Sun StorEdge, SunVTS, and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and in other countries. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc.
    [Show full text]
  • Upgrading and Repairing Pcs, 21St Edition Editor-In-Chief Greg Wiegand Copyright © 2013 by Pearson Education, Inc
    Contents at a Glance Introduction 1 1 Development of the PC 5 2 PC Components, Features, and System Design 19 3 Processor Types and Specifications 29 4 Motherboards and Buses 155 5 BIOS 263 UPGRADING 6 Memory 325 7 The ATA/IDE Interface 377 AND 8 Magnetic Storage Principles 439 9 Hard Disk Storage 461 REPAIRING PCs 10 Flash and Removable Storage 507 21st Edition 11 Optical Storage 525 12 Video Hardware 609 13 Audio Hardware 679 14 External I/O Interfaces 703 15 Input Devices 739 16 Internet Connectivity 775 17 Local Area Networking 799 18 Power Supplies 845 19 Building or Upgrading Systems 929 20 PC Diagnostics, Testing, and Maintenance 975 Index 1035 Scott Mueller 800 East 96th Street, Indianapolis, Indiana 46240 Upgrading.indb i 2/15/13 10:33 AM Upgrading and Repairing PCs, 21st Edition Editor-in-Chief Greg Wiegand Copyright © 2013 by Pearson Education, Inc. Acquisitions Editor All rights reserved. No part of this book shall be reproduced, stored in a retrieval Rick Kughen system, or transmitted by any means, electronic, mechanical, photocopying, Development Editor recording, or otherwise, without written permission from the publisher. No patent Todd Brakke liability is assumed with respect to the use of the information contained herein. Managing Editor Although every precaution has been taken in the preparation of this book, the Sandra Schroeder publisher and author assume no responsibility for errors or omissions. Nor is any Project Editor liability assumed for damages resulting from the use of the information contained Mandie Frank herein. Copy Editor ISBN-13: 978-0-7897-5000-6 Sheri Cain ISBN-10: 0-7897-5000-7 Indexer Library of Congress Cataloging-in-Publication Data in on file.
    [Show full text]
  • 1394B Firewire 800 PCI Express Host Adapter Installation Guide
    1394b FireWire 800 PCI Express Host Adapter Installation Guide 1. Introduction Thank you for purchasing this IEEE 1394b FireWire 800 PCI Express Card. It is the next generation of FireWire technology, promises to spur the development of more innovative high-performance devices and applications. It doubles the throughput of the original 1394a technology, dramatically increases the maximum distance of FireWire connections, and supports many new types of cabling. Features: 9 Fully IEEE1394 OHCI compliance 9 PCI Express Base Specifications 1.0a Compliant, 2.5Gbps (250Mbytes/sec) Transfer Rate 9 Up to 800Mbits/sec IEEE 1394b FireWire 800 transfer rate 9 Two 9-pin (1394b) and one 6-pin (1394a legacy) external connectors 2. Layout J4: Internal 1394b J8: Internal 1394 TPA+ TPA- (Shares the same Port #1 (shared GND GND TPB+ TPB- 1394b port as J2) connector, to +12V +12V KEY GND J2, J6: 9-pin 1394b FireWire 800 J11: AUX Power Connectors Connector J9: JP1: 1394 Bus 6-pin 1394a Power Selector Legacy Connector 1 IEEE 1394b FireWire 800 PCI Host Adapter JP1: IEEE1394 Bus Power Selector Settings Use +12V from PCI Express Slot PCIE AUX (motherboard’s PCB) for 1394 Bus (default) Power Use Auxiliary Power from J5 (in this PCIE AUX setting, please connect a power split cable from power supply to J6 of the Card) 3. Installing the IEEE 1394b PCIe Host Adapter 1. Turn the system power OFF before installation! 2. Use static electricity discharge precautions. Remove possible static discharge potential from any objects that the host adapter may come in contact with before installation.
    [Show full text]
  • Pcie X8 Gen 2 Host to ELB Kit Pcie X8 Gen 2 Expansion Kit with Pcie X8 Gen 2 Host Cable Adapter, Pcie X8 Gen 2 Expansion Link Board, and Pcie X8 2M Cable
    PCIe x8 Gen 2 Host to ELB Kit PCIe x8 Gen 2 expansion kit with PCIe x8 Gen 2 host cable adapter, PCIe x8 Gen 2 expansion link board, and PCIe x8 2M cable. OSS-KIT-EXP-7500 The Gen 2 host adapter card inserts into any PCI Express x8, or x16 slot on the host motherboard. The high speed cable allows data transfers to and from the host at 40Gb/s. The PCIe x4/x8 expansion link board installs in the syste m host slot of a PCIe backplane seamlessly connecting a downstream I/O device to the host computer without software. TECHNICAL PCIe x4/x8 Gen 2 Expansion Link Board Form Factor PICMG 1.3 SHB Express system slot compliant SPECIFICATIONS Slot Type System slot for the expansion chassis Dimensions (H x L) 4.375 x 6.6 in (111 x 161 mm) 1 slot wide PCIe x8 Gen 2 Host Cable Adapter Switch PLX PEX8632 32 lane switch Form Factor PCIe half-card Upstream Interface PCIe x4 over cable, PCIe x8 over cable Operating Temperature 0˚C to +70˚C environment Downstream Interface 20 lanes of PCI Express can be auto-configured as: Storage Temperature -40˚C to 85˚C One x16 and one x4 PCIe links, Two x8 and one x4 Operating Humidity 10% to 90% relative humidity non- PCIe links, Five x4 PCIe links condensing Front Panel Connectors 1 PCIe x4 cable connector, 1 PCIe x8 cable connector Storage Humidity 5% to 95% relative humidity non- Front Panel Indicators 1 green LED for x4, 1 green LED for x8 condensing Internal Indicators Power In-range Indicators for +12V, +3.3V & VTT Power 3.3V (Red/Green) Power on indicator for +1V (Green) Connectors PCIe x8 cable connector Bank of 5 board status indicators (Red) PCIe x8 edge connector Optional Features Switch Control: 3 banks of DIP switches for PEX8632 Industry Specifications PCIe External Cabling Specification, configuration Rev.
    [Show full text]
  • ATTO Expresssas Host Adapter Installation and Operation Manual Expresssas R348 RAID Adapter Expresssas R380 RAID Adapter
    ATTO ExpressSAS Host Adapter Installation and Operation Manual ExpressSAS R348 RAID Adapter ExpressSAS R380 RAID Adapter © 2007 ATTO Technology, Inc. All rights reserved. All brand or product names are trademarks of their respective holders. No part of this manual may be reproduced in any form or by any means without the express written permission of ATTO Technology, Inc. 7/2007 Document Control Number: PRMA 0389-000 Contents 1 ATTO provides storage solutions .....................................................1 Primary benefits Technical highlights 2 Install drivers .......................................................................................3 Windows Windows XP and Server 2003 Windows Vista Create an installation disk from the CD Create an installation disk from a file Mac OS X drivers Linux Loading drivers 3 Install hardware ...................................................................................5 System requirements SAS address Installation Bracket details Adapter board details 4 Updating drivers and adapter configurations ..................................9 Upgrade ExpressSAS drivers in Windows Windows XP and Server 2003 Windows Vista Install a fresh copy of Windows Install a fresh copy of Windows Vista Mac OS X driver update Linux driver update 5 Troubleshooting ..................................................................................11 General suggestions If the RAID adapter is not accessible Appendix A Standards and compliances ............................................i FCC standards: radio and
    [Show full text]
  • USB 3.1 2-Port Pcie Host Adapter - Type-A Installation Guide
    USB 3.1 2-Port PCIe Host Adapter - Type-A Installation Guide Introduction The USB 3.1 2-Port PCIe Host Adapter - Type-A adds two USB 3.1 ports to your PCIe-enabled desktop PC, and the latest USB 3.1 technology supports data transfer rate up to 10Gb/s (Two times faster than USB 3.0). Key Features and Benefits • Simply add two USB 3.1 Type-A ports to your desktop computer via available PCI Express slot • Complies with PCI-Express 3.0 version standard with high performance Asmedia ASM1142 chipset • Supports plug-n-play, hot-swappable, and backward compatible with USB 3.0 / 2.0 / 1.1 devices 04-0991A 1 • Each USB port provides power output to 900mA to better support the power consumption of connected device • Built-in 4-pin power connector to connect with system power supply as needed to ensure sufficient power supplied through USB port • Dual-profile bracket design (Full and Low Profile) fits different system form factors with included low profile bracket • Each USB port features over-current protection to further protect your device Package Contents • USB 3.1 2-Port PCIe Host Adapter - Type-A • Low profile bracket • Installation guide System Requirements • Desktop PC with one available 4x or larger PCIe slot • Windows 8.1 / 8 • Various Linux Kernels 2 Layout 4-pin power connector (optional) PCIe 4x interface USB 3.1 Type-A ports Low profile bracket Easily fits your form factor system (Full or Low Profile) by replacing the bracket Figure 1: Layout *Note: The host adapter will work with or without the 4-pin power connected.
    [Show full text]
  • 9-Port Mil1394 Pcie OHCI Adapter Card Triple-Node IEEE-1394B Pcie OHCI Solution
    DATASHEET 9-Port Mil1394 PCIe OHCI Adapter Card Triple-Node IEEE-1394b PCIe OHCI Solution Applications Overview Vehicle software, hardware, and system emulation labs The FW-3x-PCIe-400T is a triple (3 independent nodes) Mil1394 OHCI host adapter with a 4 lane PCIe host interface. The FW-3x-PCIe-400T Transformer-coupled IEEE-1394b desktop computer host adapter integrates three IEEE-1394 nodes (channels) on to a single 4-lane PCIe Flight Control, Mission Systems emulation environments host adapter card. Each of the available nine ports are isolated using AS5643/1 defined active transformers that provide guaranteed minimum signal amplitude. Benefits The FW-3x-PCIe-400T provides Flight Control, Vehicle Management Systems, Mission Systems or Avionics simulation and test applications High density 3 PHY 9-port design with a highly integrated solution. Operating at data rates of up to Uses industry standard Texas Instruments TSB41BA3 Physical Layer 500Mb/s per channel the triple OHCI solution was designed for high and XIO2213B 1394 OHCI Link Layer Controller throughput applications. For applications requiring high node/port count and transformer Implemented with active transformer isolation to increase cable isolation such as Flight Control, Vehicle Management Systems, Mission length and robustness Systems or Avionics simulation laboratories that connect to a cross No power over 1394b I/O cable eliminates power and ground shift point switch, the FW-3x-PCIe-400T provides the ideal cost performance concerns solution. The IEEE-1394 connectivity is provided by three Texas Instruments XIO2213B Open Host Controller Interface (OHCI) Link Layer Controllers with three TSB41BA3 PHY devices. The XIO2213B implements PCIe 1.1 Features x1 host interface and the 1394 Beta PHY is capable of S100β (transformer option required), S200β and S400β operation.
    [Show full text]
  • ATTO Express PCI Host Adapters Installation And
    ATTO Express PCI Host Adapters Installation and Operation Manual ATTO ExpressPCI UL4D Dual channel Ultra320 SCSI, PCI-X host adapter ATTO ExpressPCI UL5D Dual channel Ultra320 SCSI, PCIe host adapter ATTO ExpressPCI UL5D LP Dual channel Ultra320 SCSI, low-profile PCIe host adapter ATTO Technology, Inc. 155 CrossPoint Parkway Amherst, New York 14068 USA www.attotech.com Tel (716) 691-1999 Fax (716) 691-9353 Sales support: [email protected] Technical support: Monday -- Friday, 8am-6pm EST [email protected] Tel (716) 691-1999 x242 © 2010 ATTO Technology, Inc. All rights reserved. All brand or product names are trademarks of their respective holders. No part of this manual may be reproduced in any form or by any means without the express written permission of ATTO Technology, Inc. 2/2010 .............................................................................................................................................PRMA-0325-000MD Contents 1 ATTO ExpressPCI Ultra320 SCSI Solutions 1 Ultra 320 SCSI features Common features ExpressPCI UL4D Host Adapter UL4D Host Adapter ExpressPCI UL5D, UL5D LP Host Adapter UL5D Host Adapter UL5D LP Host Adapter ExpressPCI Ultra 320 Host Adapter selection guide 2 Hardware Installation 3 System requirements Installation 3 Installing and Updating Drivers, Flash 5 Install from the Installation CD Windows OS X Linux Appendix A Glossary ............................................................................................i Appendix B Cabling and Termination .................................................................iii
    [Show full text]
  • Adaptec SCSI RAID
    Adaptec SCSI RAID 2100S Installation Guide R Copyright © 2000 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035. Trademarks Adaptec and the Adaptec logo are trademarks of Adaptec, Inc., which may be registered in some jurisdictions. Windows 95, Windows 98, Windows NT, and Windows 2000 are trademarks of Microsoft Corporation in the US and other countries, used under license. All other trademarks are the property of their respective owners. Changes The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Adaptec, Inc. assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. Adaptec reserves the right to make changes in the product design without reservation and without notification to its users. Disclaimer IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPYRIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR OTHER REMEDIES. ii Regulatory Compliance Statements Federal Communications Commission Radio Frequency Interference Statement WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
    [Show full text]
  • M2E4SFF8643 U.2 to M.2 Host Adapter Manual
    U.2 (SFF-8643) to M.2 PCI Express 3.0 x4 Host Adapter Card for 2.5” U.2 NVMe SSDs M2E4SFF8643 *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/M2E4SFF8643. Manual Revision: 03/23/2017 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules.
    [Show full text]