Alphabetical Listing of Waste Classification
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Studiopack Ukraine Limited Is the First and the Only National Manufacturer of Environmentally Friendly Disposable Aluminum Foil Containers in Ukraine
BusinessBusiness offeroffer NATIONALNATIONAL PRODUCERPRODUCER OFOF DISPOSABLEDISPOSABLE ALUMINIUMALUMINIUM FOILFOIL TRAYSTRAYS ININ UKRAINEUKRAINE Kiev, UKRAINE 2015 ABOUTABOUT COMPANYCOMPANY Company Studiopack Ukraine Limited is the first and the only national manufacturer of environmentally friendly disposable aluminum foil containers in Ukraine. Our production is equipped by up-to-date high-technology equipment that meets all European standards of food packaging production. Quality, safety and eco friendliness of disposable aluminum foil containers as well as raw material is confirmed by quality control certificates, sanitary-hygienic certificates and Technical Conditions 27.4-36756925-00162010 «Aluminum foil goods for a food industry and packaging application» and conforms to the highest requirements of the European standards. Aluminum foil containers produced by Studiopack Ukraine Limited are intended for use in bakery, meat and fish industry by industrial and private enterprises, in HORECA sector, in retail for its own production. Studiopack Ukraine Limited production is certified according to ISO standards as follows: •Quality management system ISO 9001:2008 •Alimentary products safety management system ISO 22000:2005 •Environmental management system ISO 14001:2004 QUALITYQUALITY CERTIFICATESCERTIFICATES PRODUCTIONPRODUCTION FACILITIESFACILITIES Production of Studiopack Ukraine Limited is equipped by up-to-date high- technology Italian equipment. All products meet global quality standards and have all necessary Ukrainian and European certificates. Our products correspond to the requirements of European standards EN 602 «Aluminium and aluminium alloys – Wrought products – Chemical composition of semi products used for the fabrication of articles for use in contact with food». Our products have Ukrainian quality control certificates and sanitary-hygienic certificates. The productions is certified by an international centralized management system ISO. -
Young Adult Smokersメ Perceptions of Cigarette Pack Innovation, Pack
Australasian Marketing Journal 19 (2011) 174–180 Contents lists available at ScienceDirect Australasian Marketing Journal journal homepage: www.elsevier.com/locate/amj Young adult smokers’ perceptions of cigarette pack innovation, pack colour and plain packaging ⇑ Crawford Moodie , Allison Ford Institute for Social Marketing, University of Stirling, Stirlingshire FK9 4LA, Scotland, UK article info abstract Article history: In jurisdictions where most forms of marketing tobacco are prohibited by law, such as the United King- Available online 8 June 2011 dom (UK), the tobacco industry is increasingly turning to innovative packaging to promote their products. Using focus group research we explored perceptions of packaging innovation (including cigarette packs Keywords: with novel shapes and method of opening), and also plain packaging (all branding removed), among 54 Cigarette packaging young adult smokers aged 18–35 years, recruited in Glasgow, Scotland. We also examined smokers’ per- Pack colour ceptions of pack and plain pack colour. It was found that packs with novel methods of opening, for Pack innovation instance, like a lighter or book, were considered to have a negligible impact upon brand selection, partic- Plain packaging ularly among males. However, a small, narrow ‘perfume’ type pack created enormous interest among females and was perceived very favourably, being considered a fashion accessory and indeed one that helped minimise the health risks of smoking. Coloured plain packs (white, green, light blue, red) without a brand name, any brand descriptors or tar or nicotine levels, were identified by almost all smokers as signalling product strength. Consistent with past research the removal of branding from packs reduced the attractiveness and promotional appeal of the pack, with dark brown ‘plain’ packs perceived as more unappealing than light brown and dark and light grey packs by all groups. -
Italy Trip Travel Tips
Italy Trip Travel Tips Baggage: You may take one large suitcase (a 26” or 28” size suitcase will probably be sufficient for your needs). The maximum weight for checked-in bags on flights to Europe is 50lbs. The maximum dimension of any bag is 62” (add the length + width + height). Try to stay under 50lbs, since you’ll want to bring back souvenirs! Any excess luggage weight will incur a charge to be paid at the airport when you are checking in. Place nametags on the handles of your luggage. Make sure you place a nametag inside your bag (in case the outside tag is lost in transfer) that includes your name, address, telephone number, and email address. You are also allowed to take along one carry-on bag and a personal item (small purse, for example). Please remember that this carry-on must be small enough to either fit under your seat or in the overhead compartment. You may carry limited quantities of liquids, gels and aerosols in your carry-on bag when going through security checkpoints. Each container must be 3oz or smaller and be enclosed in only one, quart-size, Ziploc, clear plastic bag. The rest of your toiletries etc. must go in your checked bag. We advise taking trial size toiletry articles, cosmetics, medicines, slippers, jacket/sweater, camera, jewelry/valuables, and a change of clothing in your carry-on bag so you can be prepared if your large bag is delayed. It is also beneficial to pack an extra change of underwear, socks and an outfit in your traveling companion’s (roommate) checked luggage as well, if possible. -
(1990): Plywood Tea-Chests: Part-1 General [CED 9: Timber and Timber Stores]
इंटरनेट मानक Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public. “जान का अधकार, जी का अधकार” “परा को छोड न 5 तरफ” Mazdoor Kisan Shakti Sangathan Jawaharlal Nehru “The Right to Information, The Right to Live” “Step Out From the Old to the New” IS 10-1 (1990): Plywood Tea-Chests: Part-1 General [CED 9: Timber and Timber Stores] “ान $ एक न भारत का नमण” Satyanarayan Gangaram Pitroda “Invent a New India Using Knowledge” “ान एक ऐसा खजाना > जो कभी चराया नह जा सकताह ै”ै Bhartṛhari—Nītiśatakam “Knowledge is such a treasure which cannot be stolen” ( : .- .-- 1 IS10 (Part1 ):1990 PLYWOOD TEA-CHESTS - SPECIFICATION ’ PART 1 GENERAL ( Fifth Revision) ’ UDC 621’788’1i3 [ 674 - 419’32 : 663’95 3 :. i, I> 1 ‘9 ,I.’ Q BIS 1991 // ,;. : I BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG . NEW DELHI llG002 Price Group 3 __dWmmy 199 1 Timber Stores Sectional Committee, CED 33 FOREWORD This Indian Standard ( Part 1 ) ( Fifth Revision ) was adopred by the Bureau of Indian Standards on 23 March 1990, after the draft finalized by the Timber Stores Sectional Committee had been approved by the Civil Engineering Division Council. -
Infoil 55 (English)
European Aluminium Foil Association NO. 55 | SPRING 2019 Winning entries focus on more convenience and a better environment The most important competition for innovation and new technological advances in aluminium foil, the Alufoil Trophy 2019, once again attracted a strong field of entries. In total nine awards were made across the five categories, including a dis- cretionary award for overall excellence for one outstanding product. The Alufoil Trophy is an an- nual event, organised each year by the European Aluminium Foil Association (EAFA). The judges, led this year by Laura Fernandez, se- nior packaging technologist at Marks & Spencer, noted strong social elements running through entries this time, particularly in terms of conve- nience for the consumer and social or environ- mental aspects of the product development. One example of these themes is an alufoil lid with the capability to emboss braille – offering infor- mation to shoppers with poor vision. Another en- cretionary award winner, an intelligent and ‘con- Speaking about the awards Guido Aufdemkamp, ables sensitive pharmaceuticals to be used safely nected’ aluminium wine closure which simply executive director of EAFA said, “Again we see in very humid and tropical areas of the world. takes this device and its functionality to a new aluminium foil manufacturers and converters level,” Ms Fernandez remarked. stepping up to, and meeting, the challenges of “We were very taken with many of the entries an increasingly socially aware and sustainable working effectively on more than one level. So “Another winner was not from the packaging sec- environment. At the same time they are address- while it was clever technically, or offered energy tor, but was an outstanding entry in the category ing the real needs of consumers for smarter and or material savings, there were also other as- of Resource Efficiency. -
Seatca Packaging Design (25Feb2020)Web
No logos, colours, Pictorial health brand images or warnings used in promotional conjunction with information standardised packaging SMOKING CAUSES LUNG CANCER Pack surfaces in a standard colour Brand and product names in a standard colour and font 2020 Southeast Asia Tobacco Control Alliance Packaging Design Analysis to Support Standardised Packaging in the ASEAN Authors: Tan Yen Lian and Yong Check Yoon Editorial Team: Southeast Asia Tobacco Control Alliance Suggested citation: Tan YL. and Yong CY. (2020). Packaging Design Analysis to Support Standardised Packaging in the ASEAN, January 2020. Southeast Asia Tobacco Control Alliance (SEATCA), Bangkok. Thailand. Published by: Southeast Asia Tobacco Control Alliance (SEATCA) Thakolsuk Place, Room 2B, 115 Thoddamri Road, Dusit, Bangkok 10300 Thailand Telefax: +66 2 241 0082 Acknowledgment We would like to express our sincere gratitude to our country partners for their help in purchasing the cigarette packs from each country for the purpose of the study, which contributed to the development of this report. Disclaimer The information, ndings, interpretations, and conclusions expressed herein are those of the author(s) and do not necessarily reect the views of the funding organization, its sta, or its Board of Directors. While reasonable eorts have been made to ensure the accuracy of the information presented at the time of publication, SEATCA does not guarantee the completeness and accuracy of the information in this document and shall not be liable for any damages incurred as a result of its use. Any factual errors or omissions are unintentional. For any corrections, please contact SEATCA at [email protected]. © Southeast Asia Tobacco Control Alliance 2020 This document is the intellectual property of SEATCA and its authors. -
Life Cycle Assessment (LCA) of Reusable and Single-Use Coffee Cups
Life cycle assessment (LCA) of reusable and single-use coffee cups CERAMIC MUG ? TRAVEL MUG ? PAPER CUP ? WHAT’S THE BEST CHOICE BASED ON THE SITUATION ? 1. Background of the study With over 1.6 billion cups of coffee consumed a day worldwide, 1 the choice of coffee cups can have an impact on our planet ! Striving to cut the amount of resources wasted through reduction at the source and eco-responsible consumption, RECYC-QUÉBEC began examining reusable and disposable products to establish a solid foundation for possible initiatives to promote reduction at the source in this area. 2. What did we want to measure ? The specific case of coffee consumed on site at Québec Containers Features restaurants, by comparing the use of disposable cups versus washable cups. Disposable cup Sent to landfill made of paper lined Specifically, our goal was to : with polyethylene (PE), and polystyrene (PS) lid § Compare the environmental profile ; § Compare the direct costs for the restaurant ; § Analyze the social acceptability issues at play Ceramic mug provided Number of reuses variable by the restaurant based on breakage, loss, for restaurants and consumers. and theft Washed in commercial dishwasher after each use Functional unit : Travel mugs with Number of reuses variable polypropylene (PP) based on breakage and loss lid and handle One “medium” (i.e., 16 oz. or 475 ml) cup of coffee per day served for consumption on site at a Québec restaurant for one year (2013). § stainless steel Hand-washed after each use § polypropylene § polycarbonate 1. International Coffee Organization 1 3. What is a life cycle analysis (LCA) according to ISO ? AcquisitionAcquisition Production A comprehensive impact assessment of a product desof resourcesressources AssemblyAssemblage Emballage Extraction Extraction Packaging or service throughout its life cycle, from extraction TransformationProcessing of raw materials to end of life. -
Adhesion of Aluminium Foil to Coatings – Stick with It
Adhesion of Aluminium Foil to Coatings – Stick With it Günter Schubert Hydro Aluminium Deutschland GmbH R&D, Georg von Boeselager-Strasse 21, 53117 Bonn, Germany ABSTRACT Aluminium foil is widely regarded as the most effective barrier material in flexible packaging, giving almost perfect protection against light and suppressing any transport of matter. Foil is usually converted to flexible packaging laminates by traditional converting processes, such as lacquering or 2-component-adhesive lamination, but more and more extrusion coating and extrusion lamination are being used. Almost all aluminium is put through an annealing process, to produce an appropriate surface, which is as good and homogeneous as possible with regard to unwinding properties (at high speed), wettability, adhesion and chemical resistance. The effects on adhesion performance as a result of replacement of traditional sealants and adhesives by extrusion coatings are described for selected types of packages and packaged goods. Aspects relating to the foil’s surface and coatings’ barrier will be discussed. 1. INTRODUCTION Looking at flexible packaging, there is a distinct trend towards the use of extrusion coating and extrusion lamination for converting aluminium foil. A number of substantial benefits can be gained from manufacturing without solvents, achieving high line-speed, saving space for drying channels, saving on investment for solvent recovery equipment or saving storage space for crosslinking adhesives and cutting lead times. Requirements on packaging machinability, especially seal performance are usually mastered, but major effects such as the interactions between package and the filled good are often forgotten. The main reason for using aluminium foil in flexible packaging lies in the need to completely suppress migration or permeation through the package and shield the packaged good from the environment in the most suitable way. -
Volume I of I
Volume I of I TYPE III DRUG MASTER FILE INDUCTION SEALING WADS [EXCEL PACK LTD, NEW DELHI, INDIA] 1 TYPE III DMF FOR INDUCTION SEALING WADS EXCEL PACK LIMITED ; NEW DELHI; INDIA FEBRUARY – 2007 (Version 1.0) INDICTION SEALING WADS EXCEL PACK LIMITED 1004-05-06, DEVIKA TOWER 6, NEHRU PLACE NEW DELHI – 110019 INDIA TEL: 0091 (11) 41655308 / 310 FAX: 0091 (11) 41656337 E-MAIL: [email protected] 2 TYPE III DMF FOR INDUCTION SEALING WADS EXCEL PACK LIMITED ; NEW DELHI; INDIA FEBRUARY – 2007 (Version 1.0) INDICTION SEALING WADS INDUCTION SEALING WADS TYPE III DMF COMPREHENSIVE TABLE OF CONTENTS SECTION CONTENTS PAGE NO. NUMBER INTRODUCTION 4 1. PRODUCT DESCRIPTION 4 2. PROCESS DESCRIPTION 8 3. STATEMENT OF CONFIDENTIALITY 9 A ADMINISTRATIVE INFORMATION 10 PERSONS AUTHORIZED TO INCORPORATE THE 13 B D.M.F. BY REFERENCE C DESCRIPTIVE INFORMATION 14 a COMPONENT DESCRIPTION 14 b MATERIALS OF CONSTRUCTION 15 c ALTERNATE, INTERCHANGEABLE MATERIALS OF 18 CONSTRUCTION D MANUFACTURING PROCESS DESCRIPTION 20 E SPECIFICATIONS 34 1.0 SPECIFICATIONS FOR MATERIAL OF CONSTRUCTION 34 2.0 IN PROCESS TESTS 39 3.0 SPECIFICATIONS FOR FINISHED PRODUCTS 50 F TEST METHODS 54 1 DETERMINATION OF GRAMMMAGE PER SQUARE 54 METER 2 MOISTURE CONTENT 55 3 BOND STRENGTH 56 4 SEAL STRENGTH 60 5 WINDING CHECK 61 6 MELTING POINT 62 7 VISCOSITY 63 8 CONGEALING POINT 64 G QUALITY SYSTEM 67 3 TYPE III DMF FOR INDUCTION SEALING WADS EXCEL PACK LIMITED ; NEW DELHI; INDIA FEBRUARY – 2007 (Version 1.0) INDICTION SEALING WADS INTRODUCTION 1. PRODUCT DESCRIPTION: The company is engaged in the manufacture of induction heat seals for sealing of all kinds of plastic and glass bottles. -
Creative Steps Christmas Projects Supplement 2018
ONLY ...each issue packed with dozens of inspiring ideas, encouraging learning through creative play. ■ ■ ■ ■ ■ ■ ■ Get your fi rst issue Subscribe today and receive 4 issues for the price of 3! Only £22.35 per year, including p&p (£29.80 full price) www.creativesteps.co.uk/subscribe and use promo code AUT18 Festive Fun for Little Ones! DESIGNED BY CLAIRE DRESCHER LEARNING ZONES: Moving & Handling H Mathematics H Exploring & Using Materials Cone Christmas Tree STORE CUPBOARD: n Coloured card – in 1 Take a sheet of green card and fold it into a cone shape. Staple green and brown the cone to hold it in position. Use scissors to neaten the bottom edge of the cone. This will become your Christmas tree. n Cardboard tube (e.g. kitchen roll) 2 Take a cardboard tube and cover it with a piece of brown card. This will become the trunk of your tree. n Paper cup n Plastic jewels 3 Glue the Christmas tree to the top of the trunk. Sit the Christmas tree in the paper cup. Glue it in position. n Glittery foam shapes 4 Decorate the Christmas tree by sticking on glittery foam shapes, n Sequin decorations sparkly sequins and colourful plastic jewels. Remember to glue a n Stapler star to the top of the tree to complete! n Scissors n Glue Christmas Post Box STORE CUPBOARD: n Cardboard box 2 Cover the box with red paper. n Red paper Use sticky tape to secure the edges of the paper. Neatly cut n Black card the paper around the letter box n Scissors slot. -
Referral to the Zero Waste Commission: Berkeley Single Use Foodware and Litter Reduction Ordinance
Page 1 of 14 Berkeley City Council 2180 Milvia Street, 5th Floor Berkeley, CA 94704 ACTION CALENDAR April 24, 2018 To: Honorable Mayor and Members of the City Council From: Councilmember Sophie Hahn and Mayor Jesse Arreguin, and Councilmembers Linda Maio and Susan Wengraf Subject: Referral to the Zero Waste Commission: Berkeley Single Use Foodware and Litter Reduction Ordinance RECOMMENDATION 1. Refer the proposed Berkeley Single Use Foodware and Litter Reduction Ordinance to the Zero Waste Commission to invite input from key stakeholders, including restaurants and other food retailers and zero waste, plastics, oceans and other environmental experts, and hold public meetings to obtain input on the proposed Ordinance. 2. Refer to the Zero Waste Commission to report back to the City Council results of the Commission’s community outreach and analysis, and provide recommendations for improvements to the proposed Berkeley Single Use Foodware and Litter Reduction Ordinance. FINANCIAL IMPLICATIONS The only added cost of the referral, beyond normal staff time to support the Zero Waste Commission’s review of the proposed ordinance, is potential staffing of one or more community meetings to obtain stakeholder and other public input. Reducing use and disposal of products that make up the majority of Berkeley’s street and storm-drain litter has the potential to significantly lower City expenses including costs related to collection of debris from over 400 city trash receptacles, from clearing of clogged stormwater intakes city-wide, and from daily street sweeping and litter management. BACKGROUND Single use disposable foodware and packaging (SUDs) - including plastic bottles, caps, lids, straws, cups, and containers - is a major contributor to street litter, ocean pollution, marine and other wildlife harm and greenhouse gas emissions. -
I Cannot Sing Enough Praise About SILVER SPINNAKER BOTTLE BAG [Sailorbags], and Believe Me, We’Ve Used 15” X 4” a Unique, Reusable (And a Lot of Bags on Our Boat
2016 SAILORBAGS.COM/WHOLESALE What makes a SailorBagTM? SailorBags are made of genuine sailcloth—just like the material that graces the masts of schooners and sloops—but without the stiff coatings found on working sails. We add the finest parts and trim, and combine it all with uncompromising craftsmanship to make bags with beautiful looks and enduring quality. BEAUTIFULLY TOUGH ON THE OUTSIDE Our signature sailcloth looks and feels great, yet it stands up to the elements and is tough as nails. WHAT’S INSIDE COUNTS SailorBags are lined with our Silver SpinnakerTM ripstop fabric. Tough and water-resistant to protect what’s inside, yet soft and lightweight to be “user-friendly.” THE LITTLE THINGS MATTER A lot. That’s why we use the best hardware, including top-of-the-line, marine-finish YKK® zippers. CARRY WITH CONFIDENCE REAL-DEAL DETAILS SailorBags straps are made of Every bag features our trademark super-tough webbing, with reinforced zigzag top stitching, just like the stitching at all load-bearing points. sail makers use. (Materials and features vary by product) UNIVERSAL APPEAL OPTIONAL PERSONALIZATION LIFETIME GUARANTEE Unlike trends that come and go, nautical Offer your customers truly “localized” bags We are so confident in the quality of everything design never goes out of style; it’s simple, with our custom embroidery service. Get we make that we back it up with a no-hassle, clean, and classic. And you don’t have to creative with a map outline of your special unconditional warranty: If you or your live by the shore to love this timeless part of the world, or an icon that represents customer ever encounter a defect in SailorBags’ look — SailorBags customers and fans hail the destination.