Let’s get started! SHOX BT Wired: Listen right away! SHOX BT Wireless 808 SHOX BT headphones give you two ways to enjoy your 1 own personal concert: wirelessly and wired. This guide shows 1 Plug in the The audio cord provides inline push-to-talk Charge up the headphones 2 Turn on the headphones you how to get both set up. and play/pause control for select mobile Before you start using your headphones wirelessly, you Unplug the USB charging cable when headphones phones and other electronics. need to charge their built-in battery. Carrier 12:00 PM the headphones are charged. Plug the included audio cable into Left Here’s how it works: Plug the included USB charging Right headphone Press and hold the button on the Unpack headphone the jack on the bottom of the left (bottom) bottom of the right headphone for 3 (bottom) To play/pause music: Single click. cable into the charging jack on the headphone. seconds to turn the headphones on. Make sure you have the following items in your 808 SHOX BT To skip to the next song: Quick double click. bottom of the right headphone. package: The headphones beep and the pairing/ To go back to the previous song: Quick triple click. Right Plug the other end of the charging • 808 SHOX BT headphones headphone charging indicator next to the charging To answer/end a call: Single click. (bottom) cable into a USB power source (like Right headphone port begins blinking rapidly. • Audio cable with inline mic and controls 2 a computer or a USB charger). (bottom) • USB charging cable Connect to your phone Please note that not all functions work with all brands IMPORTANT: If you’ve previously paired your phone or other Bluetooth Plug the other end into the headphone and models of phones. Each phone’s user interface works The charging/pairing indicator next device with these headphones, the headphones will automatically attempt to the charging jack turns red while to reconnect to that device when you turn them on. If you want to pair to a jack on your phone. differently—see the user manual that came with your new device, make sure the previously paired device is either out of range or phone for more information. Charging Charged the headphones are charging. It has Bluetooth turned off. Then turn the headphones off and on again to put turns off when the headphones the headphones in pairing mode. Once the pairing/charging indicator on the If you have any questions about this product, visit are fully charged. right headphone starts blinking, go to step 3 to pair and connect. 808Audio.com or call our toll-free help line at 1-800-732-6866. Instructions continue on the other side... SHOX BT Wireless (continued) Using SHOX BT Wirelessly 3 Pair + Connect Bluetooth Wireless Connection Tips Listening to music To go to the previous/next song: Press and hold the or • Make sure the Bluetooth capability of your device is turned on. Set your device’s volume for music to 50%. on the right headphone. 8:45PM Enable Bluetooth on your smartphone • Make sure there’s nothing plugged into the jack on the bottom of the left 8:45PM Now playing Note: This is to make sure the sound from the Wi-Fi headphone when you’re trying to use Bluetooth. or other device. Media volume headphones isn’t too loud when you start streaming. Answering/ending phone calls Wi-Fi Settings • The headphone’s Bluetooth wireless connection works up to a range Bluetooth Start playing music or other audio on your Bluetooth Settings of roughly 33 feet (10 meters). This range may vary, however, based on These headphones have a built-in microphone, so you can VPN Settings other factors, such as room layout, wall material, obstacles, your device’s device. Within seconds, the headphones start use them for phone calls. Your phone will ring through the Bluetooth performance, etc. If you’re having problems connecting to the 8:45PM streaming the audio wirelessly via Bluetooth. quick start Now playing headphones when you’re receiving a call. You can answer 8:45PM headphones, move closer to your phone. Bluetooth devices Choose 808 Shox from the pairing Note: Bluetooth playback is disabled when something Headset and end the call wirelessly from your headphones using the • Make sure your device supports audio transfer A2DP. is connected to the jack on the bottom of the left Computer options on your smartphone. (If it’s guide controls on the right headphone. SHOXBT 808 SHOX • If your device asks you for a password to connect, use “0000”. headphone. To use Bluetooth, make sure nothing’s not in the list, choose “Scan” from plugged in to this jack. your phone’s Bluetooth menu.) For best results during phone calls, use the cable with inline mic. In most Controlling playback and volume cases, this cable’s microphone will provide better performance than the The side of the right headphone has a control headphones’ built-in mic. The headphones beep when the process is complete. To pair the headphones again panel that lets you control music playback and The pairing indicator on the right headphone turns solid To answer or end a phone call: Press the 808 logo on the After turning your headphones back on, they automatically volume wirelessly. blue. right headphone. attempt to reconnect to the last connected device. If the last To play/pause music: Press the 808 logo on Note: The process of enabling Bluetooth and connecting varies connected device is not available, the headphones will enter the right headphone. IMPORTANT: Not all phones support playback control and phone answer/ from device to device. See your device’s owners manual for more pairing mode and be ready to pair to a new or different device. Press the (above the 808) end control. Check your phone’s user manual for more information if you’re information and specific instructions. Right headphone (side) To adjust volume: having trouble with these functions. or (below the 808) on the right headphone. HPA150 QSG 04