DOCSLIB.ORG

Ode Starflex Brochure

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ode Starflex Brochure ISO 27001 EN 13162 ISO 14001 EN 14303 ISO 50001 STARFLEX OHSAS 18001 Glasswool Product Brochure ODE COMPANY PROFILE ODE Insulation was founded in 1985 as a contractor in construction industry. In 1988, the company made a strategic decision to specialize in insulation industry. ODE started importing insulation products in 1990 and in 1996 the company became a manufacturer in insulation industry. Today, ODE manufactures insulation materials under 2 main categories; Building Insulation and HVAC Insulation. Its building insulation materials are Isıpan (Extruded Polystyrene Foam), Membran (Polymer Bitumen Based Waterproofing Membrane) and Starflex (Glass Wool). Its HVAC insulation materials are Starflex (Glass Wool) and R-flex (Flexible Elastomeric Foam). As of today, ODE is one of the biggest insulation manufacturers in the region. It manufactures and exports 4,000 varieties of insulation products to 75 countries. Over the years, ODE became a regional leader and recently in 2017 the company has completed the first phase of its new investment and started producing in its new factory in Eskişehir, Turkey. Once the second phase of this investment is completed and the production capacity in technical insulation (HVAC) is increased, ODE will be the biggest manufacturer in technical insulation between China and Germany. Besides, ODE Insulation has identified 15 target countries for its export under Turquality brand building program. Currently ODE is focusing on these countries in order to develop its distribution channels. In 2015, ODE became the first and the only company in insulation industry in the region that has Environmental Product Declaration (EPD) certificate for all of its product range, which means that ODE products are internationally approved and they are in accordance with the European standards. ODE insulates the future and it will keep investing in the future by transferring its 30 years of experience in insulation to create a sustainable environment for the next generations. ÇORLU PRODUCTION FACILITY ESKİŞEHİR PRODUCTION FACILITY STARFLEX GLASS WOOL STARFLEX GLASS WOOL FIRE SAFETY Glass wool is produced by heating silica sand at high temperature, melting it into fibers. It can be produced in different size and technical specifications according to their area and purpose of usage with different facing materials, as blanket, board, pipe. Selection of combustibility classification COMBUSTIBILITY CLASSIFICATION is important for knowing fire response of (according to TS EN 13501-1) materials. Combustibility Classification A1-A2-B-C-D-E-F BLANKET BOARD PIPE ODE STARFLEX is classified as a ‘’A1’’ Additional Classification According to s1-s2-s3 ‘’Non-Combustible’’ material as per the Smoke Generation TS EN 13501-1 standard. Additional Classification for d0-d1-d2 Flaming Droplets/Particles SERVICE TEMPERATURE THERMAL CONDUCTIVITY (λ) It should be known that the thermal insulation material is suitable to be used at what temperature range in order to be applied safety. ODE STARFLEX can be used with convenience without compromising their properties between -50°C and +250°C. Thermal conductivity is the amount of heat that is transferred through two 1 m2 surfaces of insulation material, that are 1 m apart and parallel to each other when the temperature difference between the two sides (Δt) equals 1°C. The unit of thermal conductivity is W/m.K. This value is the most important property of thermal insulation materials. The lower the thermal conductivity of an insulation material is, the higher its resistance, d, to heat transfer. SOUND INSULATION AND ACOUSTIC DESIGN ODE STARFLEX is manufactured in the λ = 0,031-0,044 W/m.K thermal conductivity range in accordance with EN 13162 and EN 14303 standards. Sound is defined as pressure waves which propagate in free environments. Efforts conducted to reduce the sound pressure level are classified as “insulation”, while efforts toward reducing the time THERMAL RESISTANCE ( ) R of reverberation are classified as “acoustic design”. In order to reduce unwanted sound and noise in buildings and installations, ODE STARFLEX offers effective solutions for acoustic design and sound insulation with its open pore fibrous nature and wide product range. Thermal resistance is the measure of the resistance Wall of the insulation material to the transfer of heat. It Indoor Air is calculated as the proportion of the thickness of Temperature a material (m) to thermal conductivity (W/m.K). Its Outside Air unit is m2.K/W. Temperature ENVIRONMENTALLY FRIENDLY It is calculated using the formula R=d/λ. As the material’s R value increases, the material shows greater resistance to the transfer of heat. In selected systems, the lower thermal conductivity ODE STARFLEX glass wool is certified as be user friendly, environmentally friendly, and not harmful (λ) or the higher the thickness of thermal insulation for human health by EUCEB, the European Certification Board for mineral wool products. With its material (d), the higher is the thermal insulation EPD (Environmental Product Declaration) Document, it furnishes additional scores between 2-18 for resistance achieved. buildings wishing to obtain LEED, BREEAM, DGNB, etc. certification. STARFLEX BLANKET STARFLEX BLANKET TECHNICAL SPECIFICATIONS High performance, long-lasting, environmentally friendly glass wool product manufactured in blanket form and used for thermal and sound insulation and for fire safety. The ODE STARFLEX Blanket Group is manufactured in the thermal conductivity range of λ = 0.032-0.044 W/m.K NAME OF PRODUCT ODE STARFLEX Technical Specification Unit ODE STARFLEX BLANKET STARFLEX STARFLEX STARFLEX STARFLEX STARFLEX STARFLEX Type - 044 042 040 037 035 032 Thickness mm 50-240 50-240 50-240 25-200 25-200 25-180 Reaction to fire* EuroClass A1 Thermal conductivity (λ) (10˚C) W/(m.K) 0,044 0,042 0,040 0,037 0,035 0,032 Thermal Resistance (R) (m2.K)/W 1,10-5,45 1,15-5,70 1,25-6,00 0,65-5,40 0,70-5,70 0,75-5,60 Maximum Service Temperature °C 250 AREAS OF USE LAMINATION TYPES The ODE STARFLEX Blanket can be manufactured with various facing. • All types of wooden free standing roofs and metal roofs, • Attic floors, YGT** Yellow Glass Tissue • Sandwich roof systems, • Solar energy systems, • Poultry farms and animal shelters, BGT Black Glass Tissue • Prefabricated structures, • HVAC systems Foil Scrim Kraft ADVANTAGES FSK • It is used for thermal insulation, sound insulation, acoustic design, and for the purposes of fire CLASS 0 Class 0 Alu Foil safety. Its classification as a class “A1’’ ‘’Non-Combustible” (TS EN 13501-1) material is a very significant advantage for fire safety.* • Since it is lightweight, it is very easy to lift up to the roof and to cut and install. WGF Woven Glass Fabric • Glass wool blankets covered on one side with aluminum foil provide high thermal and sound insulation in air conditioning and ventilation ducts. • Due to the properties of glass wool, it does not tear or produce wastage during installation. It Aluminum Glass Fabric does not degrade, decompose, become mouldy in time. Thanks to its natural content, it does not ALUGLASS degrade and is user friendly; It is EUCEB certified as not harmful to human health; • With its EPD Document, it furnishes additional scores for buildings wishing to obtain LEED, Kraft Paper BREEAM, DGNB, etc. certification. KRAFT *unfaced types *unfaced types **Facing can be applied to both sides as preferred. STARFLEX BOARD STARFLEX BOARD The ODE STARFLEX Board Group is manufactured in the thermal conductivity range of λ = 0.031-0.037 W/m.K TECHNICAL SPECIFICATIONS NAME OF PRODUCT ODE STARFLEX Technical Specification Unit ODE STARFLEX BOARD Type - STARFLEX 037 STARFLEX 035 STARFLEX 032 STARFLEX 031 Thickness mm 50-220 50-220 25-180 20-100 AREAS OF USE Reaction to fire* EuroClass A1 • Between two wall, W/(m.K) 0,037 0,035 0,032 0,031 • In double walled sandwich wall panels, Thermal conductivity (λ) (10˚C) • For acoustic applications, Thermal Resistance (R) (m2.K)/W 1,35-5,90 1,40-6,25 0,75-5,60 0,65-3,20 • Screens and partitions, and of elevators, stair enclosures, and skylights, • For internal insulation of wooden buildings, Maximum Service Temperature °C 250 • In flat and sloping terraced roofs, • For attics, below roof rafters, and under sloping concrete sections, • For thermal insulation of external walls, • Between floors, under floating screed, on slab girders, and under travelling elements LAMINATION TYPES • In flat and sloping terraced roofs, under floating screeds and plating, • HVAC systems The ODE STARFLEX Board can be manufactured with various facing. ADVANTAGES YGT** Yellow Glass Tissue • Thanks to its water-repellent nature, it does not allow water leaks to penetrate it and remains dry. • Its classification as a class “A1’’ ‘’Non-Combustible” (TS EN 13501-1) material is a very significant advantage for fire safety.* BGT Black Glass Tissue • It does not undergo any dimensional changes when exposed to varying temperatures and humidity. • It does not degrade, decompose, corrode or become mouldy in time. • It is indestructible by insects and microorganisms. FSK Foil Scrim Kraft • Thanks to its natural content, it does not degrade and is user friendly; • It is EUCEB certified as not harmful to human health; • With its EPD Document, it furnishes additional scores for buildings wishing to obtain LEED, BREEAM, Class 0 Alu Foil DGNB, etc. certification. CLASS 0 WGF Woven Glass Fabric ALUGLASS Aluminum Glass Fabric KRAFT Kraft Paper *unfaced types *unfaced types **Facing can be applied to both sides as preferred. ODE EVOMINERAL NEW ODE EVOMINERAL MINERAL WOOL MINERAL WOOL It is the new generation environmentally friendly mineralwool SOUND INSULATION PERFORMANCE partition board manufactured through ODE Insulation’s special production technology. Sound Absorption Coefficient It has high thermal-sound insulation and fire safety performance. The sound absorption coefficient is a measure of reduction of sound energy. The sound absorption With its low thermal conductivity of 0.037 W/(m.K), class coefficient defines the relationship between the sound energy that is absorbed and the sound energy “A1’’ ‘’Non-Combustible” classification, maximum sound that reaches the surface.
Load more

Recommended publications
  • Natural Materials for the Textile Industry Alain Stout
    English by Alain Stout For the Textile Industry Natural Materials for the Textile Industry Alain Stout Compiled and created by: Alain Stout in 2015 Official E-Book: 10-3-3016 Website: www.TakodaBrand.com Social Media: @TakodaBrand Location: Rotterdam, Holland Sources: www.wikipedia.com www.sensiseeds.nl Translated by: Microsoft Translator via http://www.bing.com/translator Natural Materials for the Textile Industry Alain Stout Table of Contents For Word .............................................................................................................................. 5 Textile in General ................................................................................................................. 7 Manufacture ....................................................................................................................... 8 History ................................................................................................................................ 9 Raw materials .................................................................................................................... 9 Techniques ......................................................................................................................... 9 Applications ...................................................................................................................... 10 Textile trade in Netherlands and Belgium .................................................................... 11 Textile industry ...................................................................................................................
    [Show full text]
  • Thermal and Acoustic Insulating Panels for Buildings
    THERMAL AND ACOUSTIC INSULATING PANELS FOR BUILDINGS RECYCLING TEXTILE WASTE BY ECOFIBRA IN CHILE Since 2018, the company Ecofibra created by the engineer Franklin Zepeda, operates in Chile recycling and transforming textile waste into ecological panels for thermal and acoustic insulation of buildings. Ecofibra's products are manufactured as mats, blankets, sheets and bulk, with different densities, thicknesses and insulating capacities, allowing an efficient shelter of all types of buildings, new houses or renovated. By mixing wood with the insulating mat, Ecofibra also commercializes finished ecological panels. These products have fireproof properties and the same insulation coefficient as the traditional panels available on the market in Chile, while being less expensive. The production process is totally circular: at the end of use, the thermal panels can be returned to the company, which recycles them without generating any waste. The Ecofibra company was created in the municipality of Alto Hospicio in the Tarapacá Region, to solve the problem of the huge quantities of textile waste generated from the import of used clothing in this Free Zone. According to estimates, 80% of the used clothing that arrives in the Region ends up in clandestine dumps near this city. The Ecofibra business project, which is inspired by the principles of circular economy, has been designed in 2016 to create an efficient and ecological alternative for the construction sector, taking advantage of textile waste as a recyclable resource. The 500 sqm plant of Ecofibra was established in 2018 in the municipality of Alto Hospicio, with a capacity to produce 800 panels a day, processing four tonnes a day of textile waste, most of which coming from the surrounding area.
    [Show full text]
  • How to Choose the Right Mineral Wool for Insulation How to Choose the Right Mineral Wool for Insulation
    ADVERTORIAL BUILDING INSULATION TECHNICAL INSULATION How to Choose the Right Mineral Wool for Insulation How to Choose the Right Mineral Wool for Insulation 3 20 How to Choose the Right The Manufacturing Process Mineral Wool for Insulation of ROCKWOOL Stone Wool 4 22 Fire Safety and Resistance Application of ROCKWOOL to High Temperatures Stone Wool Products 10 Usage and Maintenance of the Buildings 12 Efficiencies and Cost Savings 13 Mechanical Properties of Mineral Wool 15 Designed Occupancy Comfort Level 18 Green Product and Sustainability 2 How to Choose the Right Mineral Wool for Insulation How to choose the right mineral wool for insulation Mineral wool is commonly used as an insulation material in buildings and built structures. There are different types of mineral wool, produced from a variety of production methods and technologies and are generally available in a wide variety of forms. A key consideration for designers, consultants, builders and building owners when choosing the right type of mineral wool insulation is to ensure that it meets their requirements on application and design parameters. Based on industry practices and contemporary building design that focuses on values and benefits mineral wool is used within building elements to perform and complement these conditions: Fire safety and resistance to high temperatures Usage and maintenance of the buildings Efficiencies and cost savings Designed occupancy comfort level Green product and sustainability The samples that were studied in this document draw references to commonly available mineral wool and its applications within buildings, tabulated in the table below. ROCKWOOL stone wool 40-60kg/m3 Drywall partition and single skin roof Elaborations and data shown in this document are based on third party laboratory and ROCKWOOL internal tests where empirical 60kg/m3 and above Double skin roof estimation and calculations are made.
    [Show full text]
  • Project B-209 GLASS WOOL INSULATION A
    Project B-209 GLASS WOOL INSULATION A Manufacturing Opportunity in Georgia Prepared for The Georgia Department of Industry and Trade 100 State Capitol Atlanta, Georgia by Harvey Diamond Industrial Development: Division Engineering Experiment Station GEORGIA INSTITUTE OF TECHNOLOGY September 1964 Table of Contents Page Summary INTRODUCTION 1 THE MARKETS 3 National Market 3 Southeastern Market 3 RAW MATERIALS 8 ADVANTAGES OF A GEORGIA LOCATION 10 Freight Savings 10 Labor Cost Savings 11 Added Labor Advantages 13 Fuel Costs 13 CONCLUSION 17 APPENDICES 18 1. Correlation between the Value of Shipments of Mineral Wool and Residential and Nonresidential Construction 19 2. Carload Freight Rates for Fiber Glass Insulation Mate- rial and Average Rates to the Southeastern Market 20 Figure 1. Sales Trend of Mineral Wool 4 Tables 1. Total Value of Building Permits Authorized in the South- east as Percentage of Value in the U. S., 1954-1962 5 2. Annual Wholesale Sales of Construction and Lumber Mate- rials in Principal Southeastern Cities 6 3. Freight Costs for Shipping Glass Insulation Products to the Southeast 11 4. Labor Productivity of Selected Glass Industries in Georgia and Major Glass Wool Producing States 12 5. Comparative Natural Gas Rates for 23 U. S. Cities 15 6. Total Freight, Labor, and Gas Savings of Georgia Plant over Existing Glass WooL Insulation Plants 17 Page 1. Locations of Plants Manufacturing Glass Wool Insulation Products 2 2. Wholesale Sales of Construction and Lumber Materials in Standard Metropolitan Areas in the Southeast 7 3. Sources of Raw Materials for Glass Wool Manufacture 9 4. Natural Gas Facilities in Georgia 14 Summary A Georgia manufacturer of glass wool can supply $5 million worth of insu- 1/ lation products to the Southeast- at cost savings of between $348,000 and $819,000 over existing plants now competing for the same market.
    [Show full text]
  • Analysis of Mineral Fibers Used in the Vintage Speaker
    MedDocs Publishers ISSN: 2639-4391 Annals of Epidemiology & Public Health Open Access | Review Article Analysis of mineral fibers used in the vintage speaker Il Je Yu1*; Bruce Kelman2 1HCT CO. Icheon, Korea 2JS Held, Seattle *Corresponding Author(s): Il Je Yu Abstract HCTm CO., LTD. Seoicheon-ro 578 beon-gil, Risk of Exposure to asbestos from unknown consumer Majang-myeon, Icheon, 17383, Korea products always has been worrying to consumers. Especially, Tel: 031-645-6358, Fax: 031-645-6358; consumer products manufactured before the asbestos ban would contain asbestos in their products. Consumers wor- Email: u1670916@chollian.net ried about exposure to asbestos from the vintage speakers manufactured before the asbestos ban during use or repair- ing. In this study, we have analyzed mineral fibers sampled Received: Mar 02, 2020 from the AR-3a speakers which were manufactured in 1973. The mineral samples were collected when the speakers were Accepted: Apr 13, 2020 repaired and analyzed by Transmission Electron Microscope Published Online: Apr 15, 2020 (TEM) equipped with an Energy Dispersive X-Ray Analyzer Journal: Annals of Epidemiology and Public health (EDX) for their detained composition. The TEM-EDX analysis of the mineral fibers sampled from the speaker indicated Publisher: MedDocs Publishers LLC that the fibers were glass wool, not asbestos fiber. Online edition: http://meddocsonline.org/ Copyright: © Yu IJ (2020). This Article is distributed under the terms of Creative Commons Attribution 4.0 International License Keywords: Asbestos; AR-3a speaker; Mineral fiber; Glass wool; Transmission electron microscopy Introduction Asbestos exposure always has been a social issue in Korea propagated extensively into the living environment during the after banning of use, import and manufacturing more than Saemaol Woondong (New Town movement) period from the 0.1% asbestos-containing products on Jan 1, 2009, accord- early 1970s through the 1980s.
    [Show full text]
  • Flow of a Disperse Emulsion of Crude Oil in Water in Porous Media
    SOCIETY OF PETROLEUM ENGINEERS OF AIME 6200North Central Expressway =~~ SPE 2481 Dallas, Texas i’5206 THIS IS A PREPRINT --- SUBJECT TO CORRECTION Flow of a Disperse Emulsion of Crude Oil in Water in Porous Media By Downloaded from http://onepetro.org/speatce/proceedings-pdf/69fm/all-69fm/spe-2481-ms/2069416/spe-2481-ms.pdf by guest on 25 September 2021 John c. (!artmill,U.S. Geological Survey, and Parke A. Dickeyj u. of ~lsa~ Members Am @ Copyright 1969 . m ... IM?-!-- M..a-ll.. -Anm American msmute of Iumwg, 1.1CLC9.SUX~lua.,I -w.“A .P&A.~m.. .. .. l@@?ers9 h!. This paper was prepared for the khth Annual Fall Meeting of the Society of Petroleum Engineers of AIME, to be held in Denver, Colo., Sept. 28-Ott. 1, 1969. Permission to copy is restrictedto an abstract of not more than 300 words. Illustrationsmay not be copied. The abstract should contain conspicuousacknowledgmentof where and by whom the paper is presented. Publicationelsewhere after publication in the JOURNAL OF PETROLEUM TECHNOLOGY or the SOCIETY OF PETROLEUM ENGINEERS JCXJRNALis usually granted upon request to the Editor of the appropriate journalprovided agreement to give proper credit is made. Discussion of this paper is invited. Three copies of any discussion should be sent to the Society of Petroleum Engineers office. Such discussionmay be presented at the above meeting and, with the paper, may be consideredfor publication in one of the two S?E magazines. ABSTRACT disperse, oil-in-wateremulsions. Our current ideas on multiphase flow in porous media may It has been suggested that oil migrates not apply to disperse emulsions.
    [Show full text]
  • Background Report, AP-42, Vol. I, SECTION 11.18 Mineral Wool
    EMISSION FACTOR DOCUMENTATION FOR AP-42 SECTION 11.18 (Formerly 8.16) Mineral Wool Manufacturing 1. INTRODUCTION The document Compilation of Air Pollutant Emission Factors (AP-42) has been published by the U. S. Environmental Protection Agency (EPA) since 1972. Supplements to AP-42 have been routinely published to add new emission source categories and to update existing emission factors. AP-42 is routinely updated by EPA to respond to new emission factor needs of EPA, State and local air pollution control programs, and industry. An emission factor relates the quantity (weight) of pollutants emitted to a unit of activity of the source. The uses for the emission factors reported in AP-42 include: 1. Estimates of areawide emissions; 2. Estimates of emissions for a specific facility; and 3. Evaluation of emissions relative to ambient air quality. The purpose of this report is to provide background information from test reports and other information to support preparation of AP-42 Section 8.16, Mineral Wool Manufacturing. This background report consists of five sections. Section 1 includes the introduction to the report. Section 2 gives a description of the mineral wool industry. It includes a characterization of the industry, an overview of the different process types, a description of emissions, and a description of the technology used to control emissions resulting from mineral wool production operations. Section 3 is a review of emission data collection and laboratory analysis procedures. It describes the literature search, the screening of emission data reports, and the quality rating system for both emission data and emission factors.
    [Show full text]
  • F:\Land Use Codes\Land Use Codes
    Provo City Land Use Codes - Numerical Order (Note: NEC stands for Not Elsewhere Classified) Living Areas 1000 1100 Household Units .....................................................1100 Single Family Dwelling ...................................................1110 Boarding house with four or fewer boarders ....................................1111 Cabins, periodic use, non commercial .........................................1111 Farm homes.............................................................1111 Household units, single family, detached ......................................1111 Ranch or farm dwelling ....................................................1111 Rooming house with 4 or less roomers ........................................1111 Single family dwelling, detached, with or without garage on one parcel ..............1111 Single family housing unit, detached ..........................................1111 Single family dwelling, attached, one or more single family dwelling, each separate parcel .................................................1112 Single family dwelling attached to nonresidential use, commercial or industrial ........1113 Mobile home single family dwelling on parcel with other household units ............1114 Single family dwelling, mobile home on same parcel as residential use ..............1114 Mobile home single family dwelling on parcel with nonresidential structure or use .....1115 Single family dwelling, mobile home on same parcel as nonresidential unit ...........1115 Mobile home single family dwelling
    [Show full text]
  • Environmental Impacts of Petroleum Production: Initial Results from the Osage-Skiatook Petroleum Environmental Research Sites, Osage County, Oklahoma
    Environmental Impacts of Petroleum Production: Initial Results from the Osage-Skiatook Petroleum Environmental Research Sites, Osage County, Oklahoma Water-Resources Investigations Report 03-4260 U.S. Department of the Interior U.S. Geological Survey ENVIRONMENTAL IMPACTS OF PETROLEUM PRODUCTION: INITIAL RESULTS FROM THE OSAGE-SKIATOOK PETROLEUM ENVIRONMENTAL RESEARCH SITES, OSAGE COUNTY, OKLAHOMA U.S. GEOLOGICAL SURVEY WATER-RESOURCES INVESTIGATIONS REPORT 03-4260 Prepared in cooperation with the U.S. Environmental Protection Agency Department of Energy National Petroleum Technology Office Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government ENVIRONMENTAL IMPACTS OF PETROLEUM PRODUCTION: INITIAL RESULTS FROM THE OSAGE-SKIATOOK PETROLEUM ENVIRONMENTAL RESEARCH SITES, OSAGE COUNTY, OKLAHOMA Yousif K. Kharaka and James K. Otton, editors U.S. GEOLOGICAL SURVEY WATER-RESOURCES INVESTIGATIONS REPORT 03-4260 Prepared in cooperation with the U.S. Environmental Protection Agency Department of Energy National Petroleum Technology Office Menlo Park, California 2003 ii U.S. DEPARTMENT OF THE INTERIOR GALE A. NORTON, Secretary U.S. GEOLOGICAL SURVEY CHARLES G. GROAT, Director For Additional Information Copies of this report may be Write to: obtained from the authors or Yousif K. Kharaka U.S. Geological Survey U. S. Geological Survey, MS 427 Information Center 345 Middlefield Road Box 25286, MS 517 Menlo Park, California 94025, USA Denver Federal Center Mail: ykharaka@usgs.gov Denver, CO 80225 More current information about the OSPER "A" and "B" sites is available at: http://ok.water.usgs.gov/skiatook/ iii Contents Page Introduction and Summary By Yousif K. Kharaka and James K.
    [Show full text]
  • Degradation of Glass Mineral Wool Insulation After 25 Years in Masonry Cavity Walls
    International Journal of Chemical, Environmental & Biological Sciences (IJCEBS) Volume 1, Issue 5 (2013) ISSN 2320-4079; EISSN 2320–4087 Degradation of Glass Mineral Wool Insulation after 25 Years in Masonry Cavity Walls Francesca Tittarelli, Francesca Stazi, Giacomo Politi, Costanzo di Perna, and Placido Munafò isotherm of several insulation materials. In 2005, Achchaq et Abstract—An experimental study was carried out on glass wool al. [2] studied through several laboratory tests the, insulation extracted from the cavity of vertical envelope of buildings morphological and thermo-physical proprieties of two new constructed in the 1980s to evaluate the insulation conservation state panel of glass wool. In 2006, Jirickovaet al. [3] determined the after 25 years. Laboratory tests on insulation samples were carried hydro-thermal behavior of two new hydrophilic mineral wool. out to assess any changes of the morphological, chemical, physical and thermal properties of the material. The results show that in glass In 2007, the same research group [4] analyzed the hydro- mineral wool insulation, the glass fibers and the binder were affected thermal performances of two typologies of wall with an by a degradation process thus increasing both water absorption and interior thermal layer of hydrophilic mineral wool through thermal conductivity. laboratory measuring tools. In the same year, Björk et al. [5] compared the hydro-thermal characteristics of glass wool, Keywords—Glass wool, thermal insulation material, durability, melamine foam and corrugated sheets of cellulose plastic at hydro-thermal performance. different temperature and moisture conditions. Most recently, the moisture condensation in fibrous insulation materials with I. INTRODUCTION various densities under different levels of moisture content HE recent 2012/27/UE Directives for the promotion of the using appositely designed moisturizing devices has been T energy efficiency in Europe have underlined the analyzed [6, 7].
    [Show full text]
  • Decarbonisation Options for the Dutch Stone Wool Industry
    DECARBONISATION OPTIONS FOR THE DUTCH STONE WOOL INDUSTRY R. Krijgsman, M. Marsidi 12 December 2019 Manufacturing Industry Decarbonisation Data Exchange Network Decarbonisation options for the stone wool industry © PBL Netherlands Environmental Assessment Agency; © ECN part of TNO The Hague, 2019 PBL publication number: 3722 TNO project no. 060.33956 / TNO publication number: TNO 2019 P11127 Authors R. Krijgsman and M. Marsidi Acknowledgements We thank Kirstin Goossens (Rockwool B.V.) for her valuable help and comments. MIDDEN project coordination and responsibility The MIDDEN project (Manufacturing Industry Decarbonisation Data Exchange Network) was initiated and is also coordinated and funded by PBL and ECN part of TNO. The project aims to support industry, policymakers, analysts, and the energy sector in their common efforts to achieve deep decarbonisation. Correspondence regarding the project may be addressed to: K.M. Schure (PBL), Klara.Schure@pbl.nl, or A.W.N van Dril (TNO), Ton.vanDril@tno.nl. Production coordination PBL Publishers This publication is a joint publication by PBL and ECN part of TNO and can be downloaded from: www.pbl.nl/en. Parts of this publication may be reproduced, providing the source is stated, in the form: R. Krijgsman and M. Marsidi (2019), Decarbonisation options for the Dutch stone wool industry. PBL Netherlands Environmental Assessment Agency and ECN part of TNO, The Hague. PBL Netherlands Environmental Assessment Agency is the national institute for strategic policy analysis in the fields of the environment, nature and spatial planning. We contribute to improving the quality of political and administrative decision-making by conducting outlook studies, analyses and evaluations in which an integrated approach is considered paramount.
    [Show full text]
  • Chapter 8.2 Man-Made Vitreous Fibres
    Chapter 8.2 Man-made vitreous fibres General description Physical and chemical properties Fibres are divided into naturally occurring and man-made (synthetic) fibres. Each of these groups can be subdivided into organic and inorganic fibres. Man-made vitreous fibres (MMVF) are a large subgroup of inorganic fibres. Fibre dimensions established in the 1960s for the measurement of asbestos fibres are used to denote which fibres should be counted for occupational safety: these are fibre length (FL) > 5 µm, fibre diameter (FD) < 3 µm and aspect ratio (FL/FD) > 3. Vitreous fibres are currently the commercially most important group of fibres, although in future crystalline fibres (e.g. fibres from aluminium oxide, silicon carbide, silicon nitride and carbon) may become increasingly important. MMVF are made from glass, natural rock or any readily fusible slag, and are all amorphous silicates. The terms “glass”, “rock”, “slag” and “ceramic” fibres refer to the starting materials. These terms are used commercially and are now also used in the scientific literature. Consequently, they erroneously create the impression that they denote a biologically relevant delimitation. This is not the case, particularly with regard to their durability in the lung or similar biological milieu. They are also unsuitable terms for the assessment of carcinogenicity, as the properties of the main types currently produced cannot be generally applied to all of the manufactured types bearing the same trade name. To make the final product, manufacturers add a thin binder to the fibres. The composition and proportional quantity of the binder may differ considerably, both between manufacturers and according to requirements for the end product.
    [Show full text]