111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:17 PM Page 1
C USTOMER C ONVENIENCE /P ERSONALIZATION G UIDE 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:17 PM Page 2
STS
TABLE OF CONTENTS DRIVER INFORMATION CONVENIENCE ENTERTAINMENT Instrument Panel ...... 1 Pushbutton Start ...... 7 Radio and CD Controls ...... 13 Instrument Panel Cluster ...... 2 Adaptive Remote Start ...... 7 Multiple-Disc CD Player ...... 13 Driver Information Center ...... 3 Voice Recognition ...... 8 DVD/Navigation Head-Up Display ...... 4 IntelliBeam™ Automatic Radio System ...... 14 Headlamps ...... 9 Bluetooth® System ...... 16 SAFETY & SECURITY Adaptive Cruise Control ...... 9 Keyless Access System ...... 5 Tire Sealant and PERFORMANCE & MAINTENANCE Passenger Air Bag Status Compressor Kit ...... 10 StabiliTrak® – Stability Indicator ...... 6 Power Mirrors and Control System ...... 16 Side Blind Zone Alert ...... 6 Curb-View Assist ...... 11 Oil Life System ...... 16 Lane Departure Warning ...... 6 Premium Fuel ...... 16 VEHICLE PERSONALIZATION Vehicle Personalization OWNER PRIVILEGES™ Settings ...... 11 Roadside Service ...... 17 Memory Settings ...... 12 Customer Assistance ...... 17 Cadillac Online ...... 17 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 3
Driver 1 2 3 4 5 6 Information
7 8 9 10 11 12 13 INSTRUMENT PANEL 1. HUD/DIC Controls 6. Audio System 10. Start Button 2. Turn Signal/Multifunction Lever 7. Adaptive Cruise Control and (on instrument panel) 3. Instrument Panel Cluster Heated Steering Wheel Controls 11. Dual Zone Climate 4. Windshield Wiper/Washer Lever (if equipped) Control System 5. Navigation Radio System 8. Horn 12. Shift Lever (if equipped) 9. Audio Steering Wheel Controls 13. Glove Box
1 Refer to Owner Manual for further information. J Reviewed with Customer (Please Check Box) Driver Safety & Security Convenience Vehicle Entertainment Performance & Owner Information Personalization Maintenance Privileges™ 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 4
STS
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 INSTRUMENT PANEL CLUSTER The instrument panel cluster 8. Oil Pressure Warning Light Note: The instrument panel cluster is includes these key features: 9. Charging System Light designed to let you know about many 10. Odometer/Driver Information important aspects of your vehicle’s 1. Engine Coolant operation. It is important to read your Temperature Gage Center Display Owner Manual and become familiar with 2. Tachometer 11. Cruise Control Set Light the information being relayed to you by the 12. Air Bag Readiness Light lights, gages and indicators, as well as 3. Speedometer what action can be taken to ensure safety 4. Fuel Gage 13. Low Tire Pressure and to prevent damage. Some of the 5. Security Light Warning Light gages and indicators may differ from the 6. Safety Belt Reminder Light 14. Antilock Brake System illustration presented. 7. Malfunction Indicator Lamp Warning Light (Check Engine Light) 15. Traction Control Off Light 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 5
DRIVER INFORMATION CENTER (Trip Information): Press the top (Vehicle Information): Press The Driver Information Center (DIC) of this button to scroll through the this button to scroll through the provides information on many of odometer and trip odometers. Press vehicle information displays (see your vehicle’s systems and, when and hold the bottom of this button DIC Controls). necessary, displays various warnings to reset each trip odometer back (Up/Down Adjustment): and messages. All messages will to zero. Press this button to adjust the appear in the DIC display located (Reset): Press this button to reset up/down position of the HUD at the bottom of the instrument certain DIC features as well as to image on the windshield (see panel cluster. The DIC controls are acknowledge and clear DIC warning Head-Up Display). located on the left side of the messages from the display. instrument panel. (Reset): Press this button to reset EM: Press this button to change the certain DIC features as well as to DIC C ontrols display from English to Metric. acknowledge and clear DIC warning (Vehicle messages from the display. Information): DIC C ontrols (with HUD) Press this button Uplevel DIC systems include Head-Up (Trip Information): Press this to scroll through the Display (HUD) controls (see Head-Up button to scroll through the following vehicle Display) along with the following odometer and trip odometers. To information displays: DIC controls. reset the trip odometer being • Fuel range displayed, press and hold this • Fuel economy button or press the (Reset) button. • Fuel used Speed Alert • Average speed This display will allow you to • Timer customize the speed alert warning. • Battery voltage You can choose to have no warning display, or to have it display at the • Tire pressure limit, at 5 mph over the limit, or at • Engine oil life (if equipped) 10 mph over the limit. Press the • Digital speed display (if equipped) reset button to make your selection. 3 Refer to Owner Manual for further information. J Reviewed with Customer (Please Check Box) Driver Safety & Security Convenience Vehicle Entertainment Performance & Owner Information Personalization Maintenance Privileges™ 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 6
STS
Warnings and Messages A up arrow to move the HUD image If a problem is sensed in one of up and the down arrow to move the your vehicle’s systems, a warning HUD image down. or message will appear on the Brightness: Use this knob (B) to DIC display. adjust the brightness of the HUD B Note: Your vehicle’s warnings and messages image as well as the instrument provide critical information that can cluster and interior lighting. Press prevent damage to your vehicle. Review HEAD-UP DISPLAY (if equipped) and release the knob so that it pops your Owner Manual to become familiar The Head-Up Display (HUD) projects out, and then turn the knob to with the information displayed and the some important driver information action required. increase or decrease the brightness from the instrument panel cluster of the instrument cluster and Check Engine or other Warning onto the windshield, reducing the interior lighting. Pull out the knob Lights with OnStar® (if equipped) need to look away from the road. to the second detent in order to If your CHECK ENGINE light, or any The information appears as an image increase or decrease the brightness other warning message appears, toward the front of the vehicle. The of the HUD image. you can push the blue OnStar HUD displays the speedometer, Off: With the knob (B) pulled out to button and speak to a live advisor. turn signal indicators, high-beam the second detent, turn it all the way OnStar Advisors can access certain headlamps indicator symbol, to the left to turn off the HUD image. adaptive cruise control features/ diagnostic information and can tell The Speed Alert feature can be set you how serious the problem is, indicators, check gages icon, and some radio and navigation features. to display an alert when the vehicle what you should do about it, or can speed exceeds the posted or contract a dealer or Roadside service The HUD controls are located on the left side of the instrument panel. recommended set speed. This feature for you. Refer to the OnStar Owner is turned on or off, and the speed is Guide for details. (Up/Down Adjustment): set, through the Driver Information Press this button (A) to adjust the See Section 3 of your Owner Manual up/down position of the HUD Center (DIC). The speedometer in for detailed DIC system information. image on the windshield. (It cannot the HUD will display yellow or red be adjusted side-to-side.) Press the when a speed alert is present. 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 7
Adjust your seat to a comfortable Safety & Security (Unlock): Press this button to driving position before adjusting unlock the driver’s door. Press it the HUD image. If you change your KEYLESS ACCESS SYSTEM again within five seconds to unlock seat position, you may have to Your vehicle features a Keyless all remaining doors. Access System. You can keep the readjust the HUD image for proper (Remote Start): This feature can viewing. If the ignition is on and you Keyless Access transmitter in a pocket or purse and operate the be used to start the engine from cannot see the HUD image, check to outside the vehicle (see Adaptive see whether: doors, ignition and trunk. The transmitter communicates with Remote Start). • Something is covering the the vehicle’s computer system (Remote Alarm): Press this HUD unit via radio antennas. button to locate your vehicle in a • The brightness is parking lot. The horn will chirp three adjusted properly times and the headlamps and parking lamps will flash three times. • The HUD image is adjusted to To sound the panic alarm, press and the proper height hold the button for three seconds. • Ambient light in the direction The horn will chirp and the lamps your vehicle is facing is low will flash for 30 seconds. Press the • A fuse is blown (see Fuses and button again to cancel the panic Circuit Breakers in your alarm. The vehicle must be turned Owner Manual) off to use the alarm. (Remote Trunk Release): Press • You are wearing and hold this button to release the polarizing sunglasses (Lock): Press this button when trunk lid when the engine is off or • The windshield and HUD lens are all doors are closed to immediately the shift lever is in Park (P). clean (do not spray glass cleaner lock all the doors. Press and hold The trunk may also be opened using directly on the HUD lens) this button to express-close all of the Trunk Release button located on the driver’s door. the open windows in the vehicle. 5 Refer to Owner Manual for further information. J Reviewed with Customer (Please Check Box) Driver Safety & Security Convenience Vehicle Entertainment Performance & Owner Information Personalization Maintenance Privileges™ 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 8
STS
Note: If the vehicle has lost battery power, When a vehicle is detected in your LANE DEPARTURE WARNING access the trunk by unlocking and lowering blind zone, a display will illuminate (if equipped) the rear seat pass-through door and pulling the glow-in-the-dark emergency trunk in the corresponding outside mirror This feature uses release handle located inside the trunk near - right or left side. If you activate the a camera located the back of the rear seats. turn signal while a vehicle is between the detected in your blind zone, the rearview mirror display will flash. and the windshield to detect lane PASSENGER AIR BAG STATUS markings. It operates only at speeds INDICATOR The system is enabled at every greater than 35 mph (56 km/h). Your vehicle is equipped with a vehicle startup. It can be turned off through the Navigation system. The warning symbol, located in the Passenger Sensing System located in instrument panel cluster, will the front passenger seat for the If the system is not functioning appear green if a lane marking is front passenger frontal air bag, and correctly, you may see a “SIDE detected. It will change to amber, a passenger air bag status indicator BLIND ZONE SYSTEM UNAVAILABLE” flash and sound three chimes if you located on the overhead console. message in the DIC, and the mirror cross a detected lane marking Note: It is recommended that children not be displays will light continuously. The without your turn signal on. placed in the front passenger seat, even with sensors, located behind the rear The system is enabled at every the Passenger Sensing System. All children quarter panels, may be blocked by vehicle startup. You can turn it off should be secured in a rear seat, including an infant riding in a rear-facing infant seat, a mud, ice, snow or water. Clean the through the Navigation system. This child riding in a forward-facing child seat or rear quarter panel and/or the system may not function if the an older child riding in a booster seat. sensors with water spray. This camera is obstructed, the message may also appear while windshield is dirty or the camera driving in open areas with no cannot distinguish visible lane SIDE BLIND ZONE ALERT objects to detect. You may choose markings. Snow covered roads, (if equipped) to turn off the system in the bright reflections off pavement or This feature may Navigation system until you are no low sun angle into camera lens are alert you to vehicles longer in wide open areas. all conditions which may not allow located in your side the system to function. blind zone. 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 9
Convenience • With your foot on the brake Note: There must be a Keyless Access pedal, press the top of the Start System transmitter in the vehicle before the PUSHBUTTON START button. When the engine begins vehicle will turn off. If a transmitter is not Your STS features a pushbutton present, the vehicle will go into accessory cranking, release the button. Do mode. You may choose to turn off the start system that does not require a not hold the button for longer vehicle by pressing the Off/Accessory button traditional key to start the engine. than 15 seconds at a time. or go back to run by pressing the Start button. If the vehicle is turned off, it will not Starting Your Engine • If the engine does not start and be able to be started again without a • The Keyless Access System a Driver Information Center Keyless Access System transmitter. transmitter must be in the message is not displayed, wait vehicle. If no transmitter is 15 seconds and try again. detected, the Driver Information ADAPTIVE REMOTE START Note: Your engine will start only if the shift This feature allows you to start the Center will display NO FOBS lever is in Park (P) or Neutral (N). DETECTED . If the transmitter is engine from outside the vehicle by using the Keyless Access System in the vehicle and the NO FOBS Stopping Your Engine DETECTED message is displayed, transmitter. (Normal transmitter place the transmitter in the • Move the shift lever to Park (P). range is within approximately 200 pocket located in the back of • Press the bottom of the feet of the vehicle.) the center console, with the Off/Accessory button. You can also set the system to buttons facing the front of If the shift lever is not in Park (P), activate the automatic climate the vehicle. the engine will stop but the vehicle control, rear window defogger or will go into accessory mode and the seat temperature control (see Driver Information Center will Vehicle Personalization Settings). display SHIFT TO PARK . Once the The engine will run for about shift lever is moved to Park (P), the 10 minutes before turning itself off, vehicle will turn off. but can be extended 10 minutes more by performing another remote start sequence at any time.
7 Refer to Owner Manual for further information. J Reviewed with Customer (Please Check Box) Driver Safety & Security Convenience Vehicle Entertainment Performance & Owner Information Personalization Maintenance Privileges™ 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 10
STS
After two consecutive remote starts, Note: If the Check Engine light is This feature allows for hands-free no additional remote starts are illuminated on the instrument panel cluster, operation of your navigation and Adaptive Remote Start cannot be used. See allowed until the vehicle has your dealer for the proper repairs. audio system. It can be used when been started. the ignition is in the On or The remote start system will Canceling a Remote Start Accessory position. The system is not operate if the hood or a door If you wish to turn off the engine programmed for the English is open. instead of driving after a remote language only. start, perform one of the Using Voice Recognition Starting the Vehicle following functions: 1. Aim the transmitter at • Press and hold the Remote Start 1. Press the (Talk) button on the the vehicle. button until the parking lamps steering wheel until a beep turn off. sounds. Voice recognition is 2. Press and release the (Lock) active when the microphone button on the transmitter. • Press and release the Hazard symbol is displayed on the 3. Immediately press and hold the Warning Flashers button inside navigation screen. (Remote Start) button for at the vehicle. Press the button again to turn off the flashers. 2. Clearly speak one of the least three seconds. available commands listed in 4. When the parking lamps flash, • Press the Off/Accessory button on your Navigation manual. The release the button. The engine and then off. system will repeat and implement will start and the parking lamps • The engine will automatically stop the command. when time expires. will remain on. The engine will If the system does not recognize continue to run for 10 minutes. a spoken command, try again. If a 5. Repeat these steps for a VOICE RECOGNITION spoken command is not available, 10-minute time extension. (if equipped) the system will inform you of its When you enter the vehicle after a status. For optimum functionality, remote start, press the brake pedal keep interior noise levels to a and press the Start button to minimum; otherwise, the transition to normal vehicle system may not understand operation before driving. the command. 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 11
3. To end voice recognition, low-beam intensity when the • Push or pull the multifunction remain silent. After approximately headlamps or taillamps of other lever when IntelliBeam has five seconds of silence, the vehicles are detected. The system turned on the high-beam system automatically cancels uses a digital light sensor on the headlights to turn off the system. Voice Recognition. rearview mirror to monitor The indicator light on the inside See your Navigation manual for surrounding traffic conditions. It rearview mirror will turn off. additional operating instructions. operates only when driving over 20 mph (32 km/h). ADAPTIVE CRUISE CONTROL INTELLI BEAM™ AUTOMATIC Turning On IntelliBeam (if equipped) HEADLAMPS (if equipped) 1. Press and release the On/Off Adaptive Cruise Control allows button on the inside rearview cruise control to be engaged in mirror. The indicator light on the moderate traffic conditions without mirror will illuminate. continually adjusting the set speed. 2. Enable the system by rotating The system uses radar to detect a the exterior lamp control switch vehicle directly in your path and to AUTO, with the turn signal/ applies limited braking or multifunction lever in its acceleration to maintain a selected neutral position. distance to the vehicle ahead. The High-Beam On light will illuminate on the instrument panel cluster when the high-beam IntelliBeam™ maximizes forward headlights are on. night vision by automatically Turning Off IntelliBeam turning on the high-beam • Press the On/Off button on the headlamps when no other vehicle inside rearview mirror. The traffic is present, and switches to indicator light will turn off.
9 Refer to Owner Manual for further information. J Reviewed with Customer (Please Check Box) Driver Safety & Security Convenience Vehicle Entertainment Performance & Owner Information Personalization Maintenance Privileges™ 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 12
STS
The cruise control switch and Selecting a Follow Distance (GAP) Adaptive Cruise Control Alert buttons are located on the If driver action is required when multifunction lever on the left side using Adaptive Cruise Control, the of the steering column and on the (Adaptive Cruise Control Alert) steering wheel. Adaptive Cruise symbol on the Head-Up Display Control system information is flashes and a warning beep sounds. displayed in the Head-Up Display. This may occur when approaching a (Off): Move the cruise control vehicle too rapidly and the system switch to this position to turn off cannot apply sufficient braking. the system (or apply your brake to Use the GAP button on the steering Note: Adaptive Cruise Control will not apply deactivate the set speed). hard braking or bring the vehicle to a wheel to adjust the distance complete stop, nor will it respond to (On): Move the switch to this between you and the vehicle ahead stopped vehicles. See Sections 3 and 4 of position to turn on the system. of you. your Owner Manual for more information. (Set/Decrease): Press this button, + (Increase Follow Distance): Press located at the end of the the top of the GAP button to multifunction lever, to set the increase the follow distance. TIRE SEALANT AND COMPRESSOR KIT (if equipped) speed, or to decrease the set speed – (Decrease Follow Distance): Press when the system is active. the bottom of the GAP button to The Tire Sealant and Compressor decrease the follow distance. Kit is located in the trunk. The kit +(Resume/Increase): Move the can be used to temporarily fill a flat switch to this position to resume The (Vehicle Ahead) symbol tire so you can safely drive to a a previously set speed, or to on the Head-Up Display will repair facility. increase the set speed when the illuminate when a vehicle is system is active. detected in your path. Adaptive See your Owner Manual for Cruise Control will adjust your complete operating instructions. speed to follow the vehicle at the selected follow distance. 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 13
POWER MIRRORS AND Vehicle Personalization enter the menu. A list of CURB-VIEW ASSIST personalization features The power mirrors control is located VEHICLE PERSONALIZATION will appear. on the driver’s door and controls SETTINGS 7. Use the Tune/Select knob to scroll both outside rearview mirrors as A variety of your vehicle’s to the feature you would like to well as the outside parallel park features can be programmed to set, and then press the knob to a preferred setting for up to two (curb-view) assist function. turn the feature on or off. If the people. On vehicles without the feature is turned on, a check mark navigation audio system, use will appear. the Personal Settings Menu to Some features have submenus that set feature preferences. show additional features that can be Personal Settings Menu set. After entering a submenu, use the 1. Turn the ignition to the On or Tune/Select knob to scroll through Accessory position. the features, and then press the knob 2. Press any button on the Keyless to turn the feature on or off. Access System transmitter to To exit the Personal Settings Menu, identify yourself as Driver 1 press the F6 (Back) button on the or Driver 2. Activating Curb-View Assist radio, or wait 15 seconds to 3. Turn on the radio. automatically return to the main Curb-view assist tilts down the audio screen. driver or passenger mirror when the 4. Press the CNFG (Configure) button or the Tune/Select knob vehicle is shifted into Reverse (R). Depending on equipment, the on the radio to enter the radio’s Personal Settings Menu may include: The mirror will return to its original main menu. position when the vehicle is shifted • Driver Greeting 5. Use the Tune/Select knob to scroll out of Reverse (R) and a five-second • Key Fob Reminder to SETUP, and then press the knob • Remote Start delay has occurred. If the outside to enter the menu. mirror selector switch is in the • Remote Recall Memory 6. Use the Tune/Select knob to • Start Button Recall middle position, neither outside scroll to PERSONAL SETTINGS mirror will move. • Auto Exit Seat MENU, and then press the knob to 11 Refer to Owner Manual for further information. J Reviewed with Customer (Please Check Box) Driver Safety & Security Convenience Vehicle Entertainment Performance & Owner Information Personalization Maintenance Privileges™ 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 14
STS
• Auto Exit Column MEMORY SETTINGS (if equipped) column to a comfortable position. • Lights Flash at Unlock This feature allows up to two drivers 8. Set the climate control • Lights Flash at Lock to program and recall memory temperature, fan speed and mode • Exterior Lights at Unlock settings for the driver’s seat position, settings, radio presets, tone • Horn Chirps at Lock outside rearview mirrors position, volume, playback mode (AM/FM or telescopic steering column position, CD) and CD position. • Twilight Delay some radio and CD settings, last 9. Use the Tune/Select knob to scroll • Driver Unlock at Off climate control setting, HUD to STORE DRIVER SETTINGS, and • Doors Unlock at Off position (if equipped) and other then press the knob. Two beeps • Driver Unlock in Park personalization settings. will sound and your settings will • Doors Unlock in Park Storing Driver Settings be saved. • Keyless Front Door Unlock 1. Turn the ignition to the On or Your memory settings are now • Keyless Doors Unlock Accessory position. programmed. Any changes made • Lock Delay 2. Press the Driver 1 or Driver 2 to the audio system and climate • Keyless Lock Delay button on the Keyless Access controls while driving will be automatically stored when the • Front Passenger Window Lock System transmitter to identify yourself. ignition is turned off. If desired, • Chime Volume High program the other driver number • Suspension Mode 3. Turn on the radio. by repeating the procedure. Recalling Personalization Settings 4. Press the CNFG (Configure) button Recalling Driver Settings Your preferences are recalled by to enter the radio’s main menu. Your preferences are recalled by pressing any button on the Keyless 5. Use the Tune/Select knob to scroll pressing any button on the Keyless Access System transmitter (must be to SETUP, and then press the knob Access System transmitter (must be activated through the DIC) or by to enter the menu. activated through the DIC) or by selecting the desired choice on the 6. Use the Tune/Select knob to scroll selecting the desired choice on the Driver Selection submenu. to DRIVER SELECTION, and then Driver Selection submenu. For vehicles with the navigation audio press the knob to enter the menu. For vehicles with the navigation audio system, see the Navigation manual 7. Adjust the driver’s seat, outside system, see the Navigation manual for additional operating instructions. rearview mirrors and steering for additional operating instructions. 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 15
Entertainment CNFG (Configure): Press this button RDS features are available for use to enter the radio’s main menu. only on FM stations that broadcast RADIO AND CD CONTROLS (Scan): Press this button to scan RDS information. RDS relies on radio stations or, when a CD is receiving specific information from playing, to scan each track or MP3 these stations and will work only file. Each station, track or file will when the information is available. play for several seconds and then advance to the next station, track MULTIPLE-DISC CD PLAYER or file. Press the button again to (if equipped) stop scanning. With the in-dash 6-Disc CD Player, To scan preset radio stations, press note that you cannot directly load a and hold the button for two CD as in single-play systems. CDs While most of the features on your seconds until a beep sounds and can be loaded or ejected with the radio will look familiar, following are PSCAN is displayed. Press the button audio system on or off. some that may be new: again to stop scanning. (Power/Volume): Press the left (Seek): Press the right or left knob to turn the system on or off. arrow button to go to the next or Turn the knob to adjust the volume. previous radio station or, when a CD (Tune/Select): Turn the right is playing, to the next or previous knob to select radio stations. track or MP3 file. Press the knob to enter the radio’s Radio Data System main menu. When you tune to a Radio Data BAND: Press this button to switch System (RDS) station, the station to FM1, FM2, AM, or XM1 and XM2 name and call letters will appear Loading CD(s) (if equipped). on the display. RDS stations may • To load a single CD, press and SRCE (Source): With a CD loaded, also provide the time of day, a release the Load button. Wait press this button to switch between program type for current for the display prompt to load radio and CD operation. programming and the name of the CD. the program being broadcast. 13 Refer to Owner Manual for further information. J Reviewed with Customer (Please Check Box) Driver Safety & Security Convenience Vehicle Entertainment Performance & Owner Information Personalization Maintenance Privileges™ 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 16
STS
• To load multiple CDs, press and Ejecting a CD hold the Load button for two (Eject): Press this button to seconds. Follow the display eject the CD that is currently prompts to load each CD. playing. Press and hold the button If the audio system is on, the to eject all CDs. N last CD loaded will begin A playing automatically. Note: If you add any label to a CD, insert more than one CD into the slot at a time, or O Playing a CD attempt to play scratched or damaged CDs, F1 DISC (Down): Press this button you could damage the CD player. When B P using the CD player, use only CDs in good C to go to the previous CD. condition without any labels, load one CD at Q a time, and keep the CD player and the D F2 DISC (Up): Press this button to loading slot free of foreign materials, liquids E R go to the next CD. or debris. F F3 CD REV << (Reverse): Press this button to go to the previous track. G DVD/NAVIGATION RADIO Press and hold the button to reverse H I J K L M quickly within a track. SYSTEM (if equipped) With the 6-disc CD/DVD changer/ Navigation Radio System Controls F4 CD FWD >> (Forward): Press this Navigation Radio System, you can button to go to the next track. Press play up to six audio CDs, MP3s, A. Display screen and hold the button to advance quickly within a track. DTS discs, audio DVDs or video B. Map DVD Eject key DVDs continuously. F5 MODE: Press this button to select C. Map DVD loading slot When a disc is inserted into the from Normal, Repeat Track, Repeat D. CD/DVD Load key CD, Random Track, and Random changer, the control functions will All CDs. appear on the display. E. CD/DVD Eject key F6 DISPLAY: Press this button to F. CD/DVD loading slot display the time of the track. 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 17
G. Power/Volume knob 3. Wait for the display prompt to To eject all discs at once, press and H. Navigation Screen Tilt key load the disc. hold the CD/DVD Eject hard key. Playing Auxiliary Devices I. SRCE (Source) key Playing a Disc You can select one of the numbered Connect an auxiliary device, such as J. Audio key touch screen keys at the bottom of a video camera, using standard RCA K. CONFIG (Configure) key the CD/DVD display screen to go cables to the color-coded audio/ from one disc to another. video jacks in the center console. A L. Navigation Voice Prompt video image will be available only Repeat key • Press one of the available touch when the vehicle is in Park (P). screen keys, 1–6, to begin M. Seek/Scan key playing that disc automatically. To play other audio sources using N. BAND key the connected auxiliary device, press • When playing a DVD, press the the AUX hard key and then the O. AUX (Auxiliary) key Display touch screen key to access Video In/Out touch screen key. further DVD options. P. ROUTE key Navigation System • From the Display screen, press Q. Map key Your vehicle’s Navigation System the DVD Menu touch screen key provides you with detailed maps of R. Tuner knob to access the video DVD menu. all major highways and roads Loading a Disc Ejecting a Disc throughout the United States. After you enter a destination, the system 1. Press the CD/DVD Load hard 1. Press and release the CD/DVD provides turn-by-turn instructions key (D). Eject hard key (E). for reaching your destination. In 2. Press the numbered touch screen 2. Press the numbered touch screen addition, the system can help you key of the slot you will be loading key of the slot you will be ejecting locate banks, airports, restaurants the disc into, 1–6, at the bottom the disc from, 1–6, at the bottom and more. of the CD/DVD display screen. of the CD/DVD display screen. See your Navigation manual for 3. The system will eject the disc. additional operating instructions. 15 Refer to Owner Manual for further information. J Reviewed with Customer (Please Check Box) Driver Safety & Security Convenience Vehicle Entertainment Performance & Owner Information Personalization Maintenance Privileges™ 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 18
STS BLUETOOTH® SYSTEM Performance & SOON in the Driver Information The in-vehicle Bluetooth system Center (DIC) when it’s necessary allows users with a Bluetooth- Maintenance to change your engine oil and enabled cell phone to make and STABILI TRAK® – STABILITY filter. The Oil Life System should receive Hands-Free phone calls CONTROL SYSTEM be reset to 100% only following utilizing the vehicle’s audio system, StabiliTrak® is an advanced an oil change. microphone and controls. The computer-controlled vehicle Resetting the Oil Life System Bluetooth-enabled cell phone stability enhancement system that 1. Press the up or down arrow on must be paired to the in-vehicle assists with directional control of the (Information) button until Bluetooth system before it can be the vehicle in difficult driving the DIC displays OIL LIFE. used in the vehicle. conditions. It turns on automatically 2. Press and hold the (Reset) every time you start your vehicle. Not all phones will support all button until 100% OIL LIFE functions. For more information, To turn off the system, press and is displayed. visit www.cadillac.com/bluetooth. hold the TC (Traction Control) See Section 5 of your Owner Manual button located near the shift lever for more information. For instructions on how to use on the center console. The message the system, see Section 3 of your STABILITY SYS OFF will appear on Owner Manual. the DIC. PREMIUM FUEL To turn the system back on, either Your vehicle may be equipped with press the TC (Traction Control) an engine that was designed to use button or turn the engine off and premium unleaded gasoline. then restart the vehicle. See your Owner Manual for information on the recommended fuel for your vehicle. OIL LIFE SYSTEM The Oil Life System calculates engine oil life based on vehicle use and displays CHANGE ENGINE OIL 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 19
Owner Privileges TM Courtesy Transportation: You may When you call Cadillac Roadside also be provided with courtesy Service or Customer Assistance, To make your ownership transportation for warranted when possible, please provide the experience as satisfying and repairs, including shuttle service for advisor with: rewarding as possible, we are same-day repairs and loaner • Your telephone number and proud to provide you with Cadillac’s transportation for overnight repair. exceptional Owner Privileges, location designed to accommodate you Roadside Assistance and OnStar® • Your Cadillac’s location anytime and anywhere. (if equipped): Push the OnStar • A description of the problem button, the vehicle will send your ROADSIDE SERVICE GPS location to the OnStar • Vehicle Identification Number 1-800-882-1112 Advisor who will speak to you, • Year and model of your Cadillac Roadside Service provides every assess your problem, contact • Delivery date Cadillac owner with the advantage Roadside Assistance and relay your • Current mileage of contacting a Cadillac advisor and, exact location so you get the help when appropriate, a Cadillac-trained you need. CADILLAC ONLINE dealer technician who can provide For more information about your on-site services: Roadside Service is also available to Cadillac, including access to the Cadillac customers beyond the • Towing service Cadillac Owner Center at My warranty period for a charge. GMLink, visit www.cadillac.com. • Battery jump-starting CUSTOMER ASSISTANCE • Lockout assistance Certain restrictions, precautions and safety 1-800-458-8006 procedures apply to your vehicle. Please • Fuel delivery Should you need to ask a question, read your Owner Manual for complete • Flat tire assistance make a comment, or request instructions. All information contained additional information, the Cadillac herein is based on information available at Trip Interruption: If your trip is the time of printing and is subject to interrupted due to a component Customer Assistance Center is change without notice. staffed around the clock with failure covered under warranty, STS is a registered trademark of Cadillac incidental expenses may be professionals to serve you. Motor Car Division and General Motors reimbursed, including hotel, meals Corporation. Copyright 2008 by Cadillac Motor Car Division. All rights reserved. and rental car. 17 Refer to Owner Manual for further information. J Reviewed with Customer (Please Check Box) Driver Safety & Security Convenience Vehicle Entertainment Performance & Owner Information Personalization Maintenance Privileges™ 111983_09a_STS_GTK_042908.qxd:STS 2007 A 4/29/08 5:18 PM Page 20
*25795638A*
25795638A