ENGINEERED DISPENSING SOLUTIONS

Version 2.2

Contents

Dispensing Consumables

Syringe Barrels, Pistons, Tip & 2, 3 Dispensing Tips & Nozzles 10-20 End Caps

Barrel Adapters & Syringe Barrel Kits 4, 5 Brush Tips & Dispense Bottles 21-23

Manual Syringes, Plungers & 6 Cartridges & Accessories 24-26 Syringe Barrel Dispensers Cartridge Dispensers & Barrel DCK Dispensing Selection Kit 7, 8 27-33 Loaders Squeeze Bottles & Caps 9

Liquid Dispensers

Digital Dispensers 37-39 Foot Pedal Dispenser 48 Switch Assemblies 40 Vacuum Pick Up Systems 49 Peristaltic Pump Dispenser 41, 42 Pinch Tube Pens 50 Handheld Dispensers 43-46 Gravity Fed Bottle 50 Dual Cartridge Dispenser 47

Dispensing Valves

Valve Selection Guide 53 Mini Spool 65 Valve & Controller Compatibility 54 High Pressure 66 Chart Pinch Tube 55, 56 Positive Displacement 67 Diaphragm 57 Auger 68 Progressive Cavity Valve & Needle 59 69-75 Accessories Cartridge 60 Jet Valve & Accessories 77-80 Spray 61, 62 Benchtop Stands 81, 82 Poppet 63, 64 Valve Controllers 85-90

Reservoirs & Pumps

IJ Series 93, 94 Plastic & Metal Fittings 104-106 FT Series 95 Specialty Fittings & Gauges 107 Clear View Pressure Chambers 97, 98 Air/Fluid Manifolds & Mufflers 108 Extruder Systems 99, 100 Filter Regulators & Hose/Tubing 109, 110 Pump Systems 101, 102

Robotics

Rotary Table 113 Robot Holder Assemblies 137-144 Benchtop 114-124 Robot Bracket Spare Parts Guides 145, 146

Valve Bracket Holder & Stand Gantry 125-130 147 Compatibility Chart

Cartridge Retainer/Syringe Bracket Vision Systems & Accessories 131-134 148 Holder & Stand Compatibility Chart

Robot Accessories Compatibility 135 Robot Kits 149-153 Chart Dispensing Consumables

Premium Dispense Management

QuantX™ is a fluid management system defined by its carefully designed and precisely engineered components. Together these components provide a superior industrial dispensing experience, resulting in reduced waste, greater accuracy, and improved yields.

1 www.fisnar.com QuantX™ Syringe Barrels QuantX™ syringe barrels feature a highly accurate manufacturing process that combines minimal resistance and parallel uniformity over the length of the syringe barrel. Manufactured from premium grade silicone-free polypropylene, these syringe barrels are available in clear for non-UV materials, amber for UV protection up to 550nm, and opaque black for maximum light protection.

All barrels are designed with a round base to fit QuantX™ DISPENSING CONSUMABLES barrel adapter assemblies.

I.D. I.D. O.D. O.D. Length Length Size Clear Amber Black (inch) (mm) (inch) (mm) (inch) (mm) 3 cc 8001001 8001040 8001045 0.379 9.62 0.453 11.5 2.941 74.7 5 cc 8001002 8001041 8001046 0.500 12.72 0.567 14.6 2.756 70.0 10 cc 8001003 8001042 8001047 0.622 15.78 0.733 18.6 3.567 90.6 30 cc 8001004 8001043 8001048 0.891 22.62 1.000 25.4 4.634 117.7 55 cc 8001005 8001044 8001049 0.889 22.57 1.020 25.9 6.898 175.2

QuantX™ Syringe Barrels & Piston Sets Syringe barrel and piston sets ensure that matched QuantX™ components are always used in the QuantX™ fluid management system providing optimum dispensing performance.

Size Clear Amber Black

3 cc 8001058 8001063 8001068

5 cc 8001059 8001064 8001069

10 cc 8001060 8001065 8001070

30 cc 8001061 8001066 8001071 55 cc 8001062 8001067 8001072

[email protected] 2 QuantX™ Pistons Evenpress™ Piston Selection Smooth flow green pistons prevent air entrapment and material waste by wiping the syringe barrel wall clean. Flat wall blue pistons are recommended for reducing potential stringing and bouncing when dispensing high-viscosity fluids. Low viscosity orange pistons are used to prevent dripping of watery fluids and accidental back-flow into the dispenser. Soft black rubber pistons are used to prevent tunneling in high-viscosity fluid materials.

Smooth Flow Flat Wall Low Viscosity Unlubricated Lubricated Size Green Blue Orange Black Black 3 cc 8001006 8001010 8001506 8001510 8001514

5 cc 8001007 8001011 8001507 8001511 8001515

10 cc 8001008 8001012 8001508 8001512 8001516

30/55 cc 8001009 8001013 8001509 8001513 8001517

QuantX™ Syringe Barrel Tip Caps Tip caps provide an air-tight seal allowing storage of pre-filled syringe barrels.

DISPENSING CONSUMABLES Item Number Type

8001038 Flat

8001039 Pointed

QuantX™ Syringe Barrel End Caps Size Item Number

End caps feature a push and twist design to ensure an air tight 3 cc 8001034 seal and secure the neck opening of the syringe barrel when in storage. 5 cc 8001035 10 cc 8001036

30/55 cc 8001037

3 www.fisnar.com QuantX™ Syringe Barrel Adapter Assemblies QuantX™ syringe barrel adapter assemblies are provided with a convenient push-to-connect fitting to connect to the controller from the syringe barrel. Fitted with Buna Nitrile O-rings. They are available in two hose lengths and optional micron filter-trap to prevent entry of fluids and fumes into the controller.

Green push-to-connect fitting comes assembled on all barrel adapter assemblies. For use with Fisnar DC50, DC100, and DISPENSING CONSUMABLES DC200 controllers.

Black bayonet fitting also included for connection to quick-connect style controllers.

Size 3 ft (0.9 m) 6 ft (1.8 m) 3 ft with Filter (0.9 m)

3 cc 8001014 8001018 8001050

5 cc 8001015 8001019 8001051

10 cc 8001016 8001020 8001052

30/55 cc 8001017 8001021 8001053

QuantX™ Adapter QuantX™ Adapter Head Head with O-Ring Replacement O-Rings

Size Item Number Size Buna N Viton® EPDM

3 cc 8001026 3 cc 8001030 8001054 8001518

5 cc 8001027 5 cc 8001031 8001055 8001519

10 cc 8001028 10 cc 8001032 8001056 8001520

30/55 cc 8001029 30/55 cc 8001033 8001057 8001521

[email protected] 4 QuantX™ Syringe Barrel Kits Syringe barrel kits are available for validation of Size Clear UV different size and color variations for both UV and non-UV materials. 3/5/10 cc QK-3510 QK-3510UV

The QK-CSK pictured includes all syringe barrels, 30/55 cc QK-3055 QK-3055UV adapter assemblies, and the most popular pistons and dispense tips. Complete Kit QK-CSK

QK-3510 QK-3510UV

QK-3055 QK-3055UV DISPENSING CONSUMABLES

QK-CSK

5 www.fisnar.com Manual Syringes Disposable, graduated, polypropylene, luer-lock style, non- sterile syringes. Fitted with a silicone lubricated rubber piston and plunger for manually dispensing a variety of fluids.

Size Manual Syringe

3 cc 8401006 5 cc 8401007

10 cc 8401008 DISPENSING CONSUMABLES

35 cc 8401009

60 cc 8401012

QuantX™ Manual Syringe Plungers An ergonomic, lightweight, reusable hand plunger for manually dispensing a variety of fluids. Compatible for use with all QuantX™ syringe barrels, green smooth-flow, and black rubber pistons.

Size Manual Plunger

3 cc 8401014

5 cc 8401015

10 cc 8401016

30 cc 8401018

JD927 Manual Syringe Size Item Number Barrel Dispensers 10 cc JD927-10 30/55 cc JD927-3055 Lightweight and comfortable dispensers with an easy twist-on barrel mounted design. Each squeeze of the trigger advances the plunger by 0.24” (6 mm) dispensing a precise amount of material every time. These dispensers are capable of dispensing most fluids by using a finger-tip control and push button plunger release.

[email protected] 6 QuantX™ Dispensing Selection Kit The DCK800 selection kit includes a variety of dispense tips, syringe barrels, pistons, and caps. A supply reference chart is also included.

Item Number Description

DCK800 Dispensing Selection Kit

Color Gauge Item Number Description Quantity

Green 18 8001158 45 Degree 2 ea Blue 22 8001161 45 Degree 2 ea Clear 27 8001164 45 Degree 2 ea Green 18 8001168 90 Degree 2 ea Blue 22 8001171 90 Degree 2 ea Clear 27 8001174 90 Degree 2 ea Black 16 8001259 UV Safe Tapered 2 ea Black 18 8001261 UV Safe Tapered 2 ea Black 20 8001262 UV Safe Tapered 2 ea Amber 15 5701309 Soft Brush Tip 1 ea Amber 15 5701310 Hard Brush Tip 1 ea DISPENSING CONSUMABLES Natural - 5601427 Pointed Tip Cap 3 ea Green - 8001039 Pointed Tip Cap 3 ea Green - 8001038 Flat Tip Cap 3 ea Clear - 8001001 3 cc Round Barrel 1 ea Clear - 8001002 5 cc Round Barrel 1 ea Clear - 8001003 10 cc Round Barrel 1 ea Green - 8001034 3 cc End Cap 1 ea Green - 8001035 5 cc End Cap 1 ea Green - 8001036 10 cc End Cap 1 ea Green - 8001006 3 cc Piston 1 ea Green - 8001007 5 cc Piston 1 ea Green - 8001008 10 cc Piston 1 ea

7 www.fisnar.com Color Gauge Item Number Description Quantity

Olive 14 8001269 Single Tapered 5 ea Gray 16 8001270 Single Tapered 5 ea Green 18 8001271 Single Tapered 5 ea Pink 20 8001272 Single Tapered 5 ea Blue 22 8001273 Single Tapered 5 ea Red 25 8001274 Single Tapered 5 ea Green 18 8001075 1/4” Blunt End 2 ea

Blue 22 8001078 1/4” Blunt End 2 ea DISPENSING CONSUMABLES Clear 27 8001081 1/4” Blunt End 2 ea Olive 14 8001084 1/2” Blunt End 5 ea Amber 15 8001085 1/2” Blunt End 5 ea Black 16 8001086 1/2” Blunt End 5 ea Green 18 8001087 1/2” Blunt End 5 ea Pink 20 8001088 1/2” Blunt End 5 ea Purple 21 8001089 1/2” Blunt End 5 ea Blue 22 8001090 1/2” Blunt End 5 ea Orange 23 8001091 1/2” Blunt End 5 ea Red 25 8001092 1/2” Blunt End 5 ea Clear 27 8001093 1/2” Blunt End 5 ea Lavender 30 8001094 1/2” Blunt End 5 ea Green 18 8001097 1” Blunt End 2 ea Blue 22 8001100 1” Blunt End 2 ea Clear 27 8001103 1” Blunt End 2 ea Green 18 8001107 1 1/2” Blunt End 1 ea Blue 22 8001110 1 1/2” Blunt End 1 ea Clear 27 8001113 1 1/2” Blunt End 1 ea Gray - 8001254 1” PTFE-Lined Tip 2 ea Pink - 8001255 1” PTFE-Lined Tip 2 ea Green 18 8001287 1/2” Flexible 2 ea Blue 22 8001289 1/2” Flexible 2 ea Red 25 8001290 1/2” Flexible 2 ea Green 18 8001293 1 1/2” Flexible 1 ea Blue 22 8001295 1 1/2” Flexible 1 ea Red 25 8001296 1 1/2” Flexible 1 ea

[email protected] 8 Manual Dispensing Bottles

A selection of low-density squeeze bottles for manually dispensing a variety of fluids available in both oval and round bottle types. Caps and bottles are interchangeable based on application requirements. Caps come in different thread sizes and correspond to matching threads on bottles. Bottles and caps sold separately.

Size Thread Oval Bottle Luer Lock Cap Slip Lock Cap

1/2 oz 15 mm EAOB0515 EALLC15 EASC15

3/4 oz 15 mm EAOB07515 EALLC15 EASC15

2 oz 18 mm EAOB218 EALLC18 EASC18

4 oz 20 mm EAOB420 EALLC20 EASC20

8 oz 24 mm EAOB824 EALLC24 EASC24 DISPENSING CONSUMABLES

Size Thread Round Bottle Luer Lock Cap Slip Lock Cap

1/2 oz 15 mm EARB0515 EALLC15 EASC15

1 oz 18 mm EARB118 EALLC18 EASC18

2 oz 18 mm EARB218 EALLC18 EASC18

4 oz 24 mm EARB424 EALLC24 EASC24

8 oz 24 mm EARB824 EALLC24 EASC24

16 oz 28 mm EARB1628 - EASC28

9 www.fisnar.com Dispensing Tips

Fisnar offers a large selection of high-quality dispense tips in a variety of lengths, sizes, and styles including PTFE-lined, flexible polypropylene, stainless steel, brush, blunt end, angled blunt end, and tapered.

These high-performance fluid delivery systems provide accurate deposits of a variety of materials to meet your dispensing needs.

[email protected] 10 QK-NSK Tip Selection Kit

A selection of the most commonly used dispense tips (blunt end, tapered, PTFE lined, and flexible) in varying gauge sizes.

QuantX™ Blunt End Dispense Tips Blunt end tips are manufactured with polypropylene hubs and stainless steel cannulas. A double helix luer lock design and polished burr-free finish ensure precision fluid dispensing. For dispensing low to high viscosity fluids in general purpose dispense applications.

QuantX™ Tapered Dispense Tips

DISPENSING CONSUMABLES Tapered smooth flow dispensing tips are designed to reduce back pressure of high-viscosity fluids resulting in an increased fluid flow rate. A uniform polypropylene luer lock design with a flash-free outlet ensures consistent fluid dispensing.

QuantX™ PTFE-Lined Dispense Tips Stainless steel cannulas with an internal PTFE lining, projecting approximately 1/8” (3.18 mm) from the cannula. Ideal for dispensing very low-viscosity fluids, solvents, and cyanoacrylates.

QuantX™ Flexible Dispense Tips Polypropylene flexible dispense tips are designed to be used in hard-to-reach areas and to prevent scratching or damage to fragile dispense surfaces.

11 www.fisnar.com QK-NSK Tip Selection Kit

Color Gauge Item Number Description Quantity

Olive 14 8001269 Single Tapered 2 ea Gray 16 8001270 Single Tapered 2 ea Green 18 8001271 Single Tapered 2 ea Pink 20 8001272 Single Tapered 2 ea Blue 22 8001273 Single Tapered 2 ea DISPENSING CONSUMABLES Red 25 8001274 Single Tapered 2 ea White 27 8001298 Single Tapered 2 ea Lavender 30 8001276 Single Tapered 2 ea Yellow 32 8001083 1/4” Blunt End 2 ea Olive 14 8001084 1/2” Blunt End 2 ea Amber 15 8001085 1/2” Blunt End 2 ea Black 16 8001086 1/2” Blunt End 2 ea Green 18 8001087 1/2” Blunt End 2 ea Pink 20 8001088 1/2” Blunt End 2 ea Purple 21 8001089 1/2” Blunt End 2 ea Blue 22 8001090 1/2” Blunt End 2 ea Orange 23 8001091 1/2” Blunt End 2 ea Red 25 8001092 1/2” Blunt End 2 ea Clear 27 8001093 1/2” Blunt End 2 ea Lavender 30 8001094 1/2” Blunt End 2 ea Gray - 8001252 1/2” PTFE-Lined Tip 1 ea Pink - 8001253 1/2” PTFE-Lined Tip 1 ea Gray - 8001254 1” PTFE-Lined Tip 1 ea Pink - 8001255 1” PTFE-Lined Tip 1 ea Olive 14 8001285 1/2” Flexible 1 ea Amber 15 8001286 1/2” Flexible 1 ea Green 18 8001287 1/2” Flexible 1 ea Pink 20 8001288 1/2” Flexible 1 ea Blue 22 8001289 1/2” Flexible 1 ea Red 25 8001290 1/2” Flexible 1 ea

[email protected] 12 QuantX™ Blunt End Dispense Tips A full selection of UV-bonded dispense tips manufactured with polypropylene hubs and stainless steel cannulas. A double helix luer lock design and polished burr-free finish ensure precision fluid dispensing. For dispensing low to high viscosity fluids in general purpose dispense applications.

I.D. I.D. 1/4” 1/2” 1” 1 1/2” 45 90 Color Gauge (inch) (mm) (6.35 mm) (12.7 mm) (25.4 mm) (38.1 mm) Degree Degree Navy Blue 12 0.089 2.27 8001118 8001123 8001131 8001138 - -

Magenta 13 0.070 1.78 8001119 8001124 8001132 8001139 --

Olive 14 0.063 1.60 8001115 8001084 8001095 8001105 8001156 8001166

Amber 15 0.054 1.37 8001073 8001085 8001096 8001106 8001157 8001167

Black 16 0.047 1.20 8001074 8001086 8006031 8001495 8001802 -

White 17 0.041 1.04 8001120 8001125 8001133 8001140 --

Green 18 0.033 0.84 8001075 8001087 8001097 8001107 8001158 8001168

Brown 19 0.028 0.70 8001121 8001126 8001134 8001141 - -

Pink 20 0.024 0.60 8001076 8001088 8001098 8001108 8001159 8001169

Purple 21 0.020 0.51 8001077 8001089 8001099 8001109 8001160 8001170

DISPENSING CONSUMABLES Blue 22 0.016 0.41 8001078 8001090 8001100 8001110 8001161 8001171

Orange 23 0.013 0.33 8001079 8001091 8001101 8001111 8001162 8001172

Sky Blue 24 0.012 0.31 8001122 8001127 8001135 8001142 --

Red 25 0.010 0.25 8001080 8001092 8001102 8001112 8001163 8001173

Beige 26 0.009 0.23 8001128 8001463 8001136 8001143 --

Clear 27 0.008 0.20 8001081 8001093 8001103 8001113 8001164 8001174

Gray 28 0.007 0.19 8001129 8001130 8001137 8001144 --

Lavender 30 0.006 0.15 8001082 8001094 8001104 8001114 8001165 8001175

Yellow 32 0.004 0.10 8001083 8001117 - ---

Turquoise 33 0.004 0.10 8001116 - - ---

13 www.fisnar.com QuantX™ Single Tapered Dispense Tips Tapered smooth flow dispensing tips are designed to reduce back pressure of high-viscosity fluids resulting in an increased fluid flow rate. A uniform polypropylene luer lock design with a flash-free outlet ensures consistent fluid dispensing. DISPENSING CONSUMABLES Standard Single Tapered UV Blocking

I.D. I.D. Length Color Gauge Item Number (inch) (mm) (inch/mm) Lime Green 10 0.118 3.00 1.25/32 8001217 Yellow 11 0.098 2.50 1.25/32 8001218 Sky Blue 13 0.079 2.00 1.25/32 8001219 Olive 14 0.063 1.60 1.25/32 8001269 Amber 15 0.054 1.37 1.25/32 8001220 Gray 16 0.047 1.20 1.25/32 8001270 Green 18 0.033 0.84 1.25/32 8001271 Pink 20 0.024 0.60 1.25/32 8001272 Purple 21 0.020 0.51 1.25/32 8001221 Blue 22 0.016 0.41 1.25/32 8001273 Orange 23 0.013 0.33 1.25/32 8001222 Red 25 0.010 0.25 1.25/32 8001274 White 27 0.008 0.20 1.25/32 8001298 Lavender 30 0.006 0.15 1.25/32 8001276

[email protected] 14 QuantX™ Double Tapered Dispense Tips Double tapered tips feature a unique fluid outlet design to reduce fluid wicking and dripping with low- viscosity materials.

Double Tapered

I.D. I.D. Length Color Gauge Item Number (inch) (mm) (inch/mm) Orange 14 0.063 1.60 1.25/32 8001263 Gray 16 0.047 1.20 1.25/32 8001264 Green 18 0.033 0.84 1.25/32 8001265 Pink 20 0.024 0.60 1.25/32 8001266 Blue 22 0.016 0.41 1.25/32 8001267 Red 24 0.014 0.37 1.25/32 8001268

QuantX™ UV & Light Block Dispense Tips Used for dispensing medium to high viscosity fluids while blocking all UV and ambient light-emitting rays and wavelengths. DISPENSING CONSUMABLES

Single Tapered UV Blocking I.D. I.D. Length Color Gauge Item Number (inch) (mm) (inch/mm) Black 14 0.063 1.60 1.25/32 8001278 Black 16 0.047 1.20 1.25/32 8001281 Black 18 0.033 0.84 1.25/32 8001282 Black 20 0.024 0.60 1.25/32 8001283 Black 22 0.016 0.41 1.25/32 8001284 Black 25 0.010 0.25 1.25/32 8001279 Black 27 0.008 0.20 1.25/32 8001275

15 www.fisnar.com QuantX™ Flexible Dispense Tips Polypropylene flexible dispense tips designed to be used in hard-to-reach areas and to prevent scratching or damage to fragile dispense surfaces. DISPENSING CONSUMABLES

I.D. I.D. 1/2” 1 1/2” Color Gauge (inch) (mm) (12.7 mm) (38.1 mm) Olive 14 0.063 1.60 8001285 8001291

Amber 15 0.054 1.37 8001286 8001292

Green 18 0.033 0.84 8001287 8001293

Pink 20 0.024 0.60 8001288 8001294

Blue 22 0.016 0.41 8001289 8001295

Red 25 0.010 0.25 8001290 8001296

QuantX™ PTFE-Lined Dispense Tips Stainless steel cannulas with an internal PTFE lining, projecting approximately 1/8” (3.18 mm) from the cannula. Ideal for dispensing very low viscosity fluids, solvents, and cyanoacrylates.

PTFE I.D. SS Tube O.D. 1/2” 1” Color (inch/mm) (inch/mm) (12.7 mm) (25.4 mm) Gray 0.024/0.61 0.042/1.06 8001252 8001254

Pink 0.011/0.28 0.32/0.80 8001253 8001255

[email protected] 16 QuantX™ Micron-S Precision Dispense Tips Precision conical tips offer high accuracy, micro-dot dispensing due to their low-resistance, fluid flow design. These precision-machined tips have been specifically designed to improve flow rates and overall performance. The thin rigid wall design enhances accuracy and definition of dots, lines, or special patterns while reducing fluid stringing or tailing tendencies. PTFE-coated versions reduce fluid wicking and dripping, and are compatible with anaerobic fluids.

Standard Bore Micron Bore

I.D. I.D. O.D. O.D. Standard PTFE Color Gauge Micron Bore (inch) (mm) (inch) (mm) Bore Coated Pink 18 0.041 1.039 0.049 1.24 5901001 - 5901012

Tan 19 0.034 0.859 0.042 1.059 5901002 - 5901013

Green 20 0.027 0.681 0.035 0.879 5901003 - 5901014

Lt. Blue 21 0.024 0.610 0.032 0.810 5901004 - 5901015

Purple 23 0.022 0.564 0.025 0.635 5901005 - 5901016

White 25 0.017 0.437 0.020 0.508 5901006 - -

Red 27 0.013 0.335 0.016 0.406 5901007 - -

DISPENSING CONSUMABLES Black 30 0.009 0.234 0.012 0.305 5901008 - -

Blue 150 um 0.006 0.16 0.010 0.24 - 5901009 -

Orange 100 um 0.004 0.11 0.008 0.20 - 5901010 -

Yellow 50 um 0.002 0.06 0.006 0.16 - 5901011 -

QuantX™ Micron Selection Kit Micron selection kit contains one each Item Number of the standard bore nozzle tip sizes QK-MSK for testing and validation purposes.

17 www.fisnar.com

Stainless Steel Dispense Tips Stainless steel dispensing tips are available in single or double cannula designs. Each stainless steel tip consists of a precision stainless steel cannula and hub designed to fit standard luer lock connections. This range of tips can be sterilized by an autoclave process for applications requiring sterile equipment. Custom lengths and diameters are available upon request.

Single Cannula 1/2” Luer Lock Double Cannula 3/4” Luer Lock I.D. I.D. Length 1/2” I.D. I.D. Length 3/4” Gauge Gauge (inch) (mm) (inch/mm) (13 mm) (inch) (mm) (inch/mm) (20 mm) 13 0.071 1.80 0.5/13 813050SS1 16 0.047 1.20 0.79/20 816050SS2 14 0.063 1.60 0.5/13 814050SS1 17 0.042 1.07 0.79/20 817050SS2 15 0.054 1.37 0.5/13 815050SS1 18 0.033 0.84 0.79/20 818050SS2 16 0.047 1.20 0.5/13 816050SS1 19 0.027 0.69 0.79/20 819050SS2 17 0.042 1.07 0.5/13 817050SS1 20 0.024 0.60 0.79/20 820050SS2 18 0.033 0.84 0.5/13 818050SS1 21 0.020 0.51 0.79/20 821050SS2 19 0.027 0.69 0.5/13 819050SS1 22 0.016 0.41 0.79/20 822050SS2 20 0.024 0.60 0.5/13 820050SS1 23 0.013 0.33 0.79/20 823050SS2 21 0.020 0.51 0.5/13 821050SS1 24 0.012 0.30 0.79/20 824050SS2 22 0.016 0.41 0.5/13 822050SS1 25 0.010 0.25 0.79/20 825050SS2 23 0.013 0.33 0.5/13 823050SS1 26 0.009 0.23 0.79/20 826050SS2 24 0.012 0.30 0.5/13 824050SS1 27 0.008 0.20 0.79/20 827050SS2

DISPENSING CONSUMABLES 25 0.010 0.25 0.5/13 825050SS1 26 0.009 0.23 0.5/13 826050SS1 27 0.008 0.20 0.5/13 827050SS1 28 0.007 0.18 0.5/13 828050SS1 30 0.006 0.16 0.5/13 830050SS1 Stainless Steel Item Number

Tip Selection Kit QK-SSTK Stainless steel single tip selection kit contains one of each of the sizes below for testing and validation purposes. 13, 14, 15, 18, 20, 21, 22, 23, 25, 26, 27, 30 gauges.

19 www.fisnar.com Large Bore Stainless Steel Dispense Tips (Long Length)

Available in Luer Lock and 1/4” NPT threaded connections, these large bore tips provide increased fluid flow rates or deposits when needed.

The long tube design allows for fluids to be easily dispensed into hard to reach areas which conventional dispense tips cannot reach.

Single Cannula Luer Lock Series I.D. I.D. 1.5” 2.5” 3.5” DISPENSING CONSUMABLES Gauge (inch) (mm) (38 mm) (64 mm) (90 mm) 8 0.140 3.56 808150SS1 808250SS1 808350SS1 9 0.124 3.16 809150SS1 809250SS1 809350SS1 10 0.118 3.00 810150SS1 810250SS1 810350SS1 11 0.095 2.40 811150SS1 811250SS1 811350SS1 12 0.089 2.27 812150SS1 812250SS1 812350SS1 13 0.070 1.78 813150SS1 813250SS1 813350SS1 14 0.063 1.60 814150SS1 814250SS1 814350SS1 15 0.054 1.37 815150SS1 815250SS1 815350SS1

Single Cannula 1/4” NPT Series I.D. I.D. 1.5” 2.5” 3.5” Gauge (inch) (mm) (38 mm) (64 mm) (90 mm) 7 0.143 3.64 807150T14 807250T14 807350T14 8 0.140 3.56 808150T14 808250T14 808350T14 9 0.124 3.16 809150T14 809250T14 809350T14 10 0.118 3.00 810150T14 810250T14 810350T14 11 0.095 2.40 811150T14 811250T14 811350T14 12 0.089 2.27 812150T14 812250T14 812350T14 13 0.070 1.78 813150T14 813250T14 813350T14 14 0.063 1.60 814150T14 814250T14 814350T14 15 0.054 1.37 815150T14 815250T14 815350T14

[email protected] 20 Brush Tips Brush tips are designed for spreading, brushing, and applying greases, adhesives, and fluid materials. Tips contain either sable or nylon bristles and come in three styles: Type A, Type B, and Economy, depending on application requirements. Type A Gauge Brush Diameter Style Item Number 16 10 mm Flat Sable 5701265 18 10 mm Flat Sable 5701266 22 10 mm Flat Sable 5701267 16 5 mm Round Nylon 5701268 18 5 mm Round Nylon 5701269 22 5 mm Round Nylon 5701270

Gauge Brush Diameter Style Item Number Type B 21 2 mm Round Nylon 5702102 27 2 mm Round Nylon 5702702 14 5 mm Round Nylon 5701405 21 5 mm Round Nylon 5702105 27 5 mm Round Nylon 5702705 14 10 mm Flat Nylon 5701410 21 10 mm Flat Nylon 5702110 Economy 27 10 mm Flat Nylon 5702710 DISPENSING CONSUMABLES Gauge Brush Diameter Style Item Number 15 3 mm Round Soft Nylon 5701309 15 3 mm Round Stiff Nylon 5701310

Brush Tip Selection Kit Brush tip selection kits are available in two different options for testing Type Item Number and validation purposes. QK-BTK-A contains one of each Type A style A QK-BTK-A brush tips. QK-BTK-B contains 1 of B QK-BTK-B each Type B style brush tips.

21 www.fisnar.com Dipit™ Bottles Dipit™ Touch-Pump bottles provide a clean method of delivery by conveniently presenting a small reservoir of solvent, cleaner, or alcohol. Fluid-ready for dipping a brush or wipe for assembly, production, or laboratory purposes. Ideal for PCB soldering operations and clean rooms. Prevents wasteful evaporation and contamination. Stainless steel lid and pump components. DISPENSING CONSUMABLES

Item Number Description

5606026 4 oz Touch-Pump Bottle

5606027 8 oz Touch-Pump Bottle

Dipit™ Brushes

Item Number Description

5701272 Dipit™ Brush Delrin 1/4” Nylon Soft

5701273 Dipit™ Brush Zinc/Steel 3/8” Bristle

5701274 Dipit™ Brush Dual Head 3/16” - 1/4” Hard

[email protected] 22 Flow-Seal Pens & Bottles Flow-seal pens and bottles are designed to channel controlled amounts of no-clean flux, solvents, lubricants, masking, water-based liquids, and more. Flow-seal products prevent evaporation of material and conform to current regulations for controlling substances capable of evaporation hazards. *All pens and bottles come supplied with chisel nib 381-8425-AC. Features • Priming is achieved by depressing the tip while the pen is vertical • A unique dispensing valve prevents flooding and soaking by releasing material in controlled amounts • Cap valve allows for easy removal of tips when cleaning or replacing • Flow-seal pens are cost efficient as product is only delivered when required

Item Item Description Size Material Description Material Number Number 0.34 oz/ HDPE FV-0100 Flow-Seal Pen 381-8425-AC Chisel Nib Acrylic 10 ml (Clear)

Flow-Seal Pen 0.34 oz/ FV-0200 Aluminum 381-8425-AB Bullet Nib Acrylic (ESD Safe) 10 ml

2 oz/ HDPE FV-0300 Flow-Seal Bottle 381-8425-AP Pointed Nib Acrylic 59.14 ml (Clear)

Flow-Seal Bottle 2 oz/ DISPENSING CONSUMABLES FV-0400 Aluminum 381-8425-PC Chisel Nib Polyester (ESD Safe) 59.14 ml

4 oz/ HDPE FV-0500 Flow-Seal Bottle 381-8425-PB Bullet Nib Polyester 118.21 ml (Clear)

Flow-Seal 1.35 oz/ HDPE Blunt Tip FV-0600 381-600-PB Polyester Jumbo Pen 40 ml (Black) (FV-0600 only) QuantX™ Nib Tip Sample Kit The QK-NTK sample kit includes eight flow-seal nib tips including acrylic chisel, acrylic bullet, acrylic point, and polyester chisel.

Item Number Description

QK-NTK Nib Tip Sample Kit

23 www.fisnar.com Cartridges High-quality, disposable cartridges provide a clean and efficient method to meet all types of production requirements. For use in a wide range of applications including pre-mixed and frozen materials, as well as prepackaged products. Available in a variety of different sizes and capacities. Can be used with manual, handheld, or pneumatic air-powered equipment.

All cartridges are molded in either low or high- DISPENSING CONSUMABLES density polyethylene. Black cartridges are designed for use with UV and light curing fluids.

I.D. Diameter Overall Length Capacity Item Number Description (inch/mm) (inch/mm) (oz/ml) EA25C-LD Natural LDPE 1.59/40.40 4.00/101.60 2.5/74

EA60C-LD Natural LDPE 1.59/40.40 7.11/180.60 6/177

EA80C-LD Natural LDPE 1.59/40.40 8.92/226.60 8/237

EA120C-LD Natural LDPE 1.59/40.40 12.34/313.40 12/355

EA110C-LD Natural LDPE 1.85/47.00 8.99/228.30 12.8/310

EA25C-HD Natural HDPE 1.59/40.40 4.00/101.60 2.5/74

EA60C-HD Natural HDPE 1.59/40.40 7.11/180.60 6/177

EA80C-HD Natural HDPE 1.59/40.40 8.92/226.50 8/237

EA120C-HD Natural HDPE 1.59/40.40 12.34/313.40 12/355

EA110C-HD Natural HDPE 1.85/47.00 8.99/228.30 12.8/310

EA200C-HD Natural HDPE 2.57/65.30 10.03/254.80 20/591

EA25C-HD-BK Black HDPE 1.59/40.40 4.00/101.60 2.5/74

EA60C-HD-BK Black HDPE 1.59/40.40 7.11/180.60 6/177

EA80C-HD-BK Black HDPE 1.59/40.40 8.92/226.50 8/237

EA120C-HD-BK Black HDPE 1.56/40.40 12.34/313.40 12/355

EA110C-HD-BK Black HDPE 1.85/47.00 8.99/228.30 12.8/310

EA200C-HD-BK Black HDPE 2.57/65.30 10.03/254.80 20/590

[email protected] 24 Dispensing Nozzles Dispensing nozzles are precision molded from polyethylene and have 1/4” NPT male threads to fit cartridges, valves, and other compatible equipment.

Item Length Diameter Standard Nozzles Material Number (inch) (inch) Standard nozzles are designed to be used in applications requiring basic dispensing of beads and EA2160-HD 2 1/16 HDPE dots. EA2180-LD 2 1/8 LDPE

EA2180-HD 2 1/8 HDPE

EA4160-HD 4 1/16 HDPE

EA4160-LD 4 1/16 LDPE

EA4180-LD 4 1/8 LDPE

EA4320-HD 4 1/32 HDPE

EA4320-LD 4 1/32 LDPE

EA4900-LD 4 3/32 LDPE

EA6160-LD 6 1/16 LDPE

EA6180-LD 6 1/8 LDPE DISPENSING CONSUMABLES Item Length Dimension Nozzle Specialty Nozzles Material Number (inch) (inch) Style Specialty nozzles are designed in a variety of styles for custom EA1050 4 1/2 x 1/16 HDPE Spreader applications that require spreading, EA1050-45 4 1/2 x 1/16 HDPE 45° Spreader brushing, step filling, and more. EA1075 4.5 3/4 x 1/8 HDPE Spreader

EA1100 4.5 1 x 1/8 HDPE Spreader

EA1175 4 1 3/4 x 1/8 HDPE Spreader

Fillet Right EA3106 4 3/8 x 1/8 HDPE Step

Fillet Left EA3206 4 3/8 x 1/8 HDPE Step

25 www.fisnar.com Cartridge Plungers The use of plungers ensures even pressure is applied on the fluid, while also preventing tunnelling of air to achieve controlled and repeatable dispense results. The plungers’ wipe clean design maximizes fluid usage from within the cartridge. Plungers are available in low or high-density polyethylene and come in a variety of sizes to fit compatible cartridges.

Item Number Color Description EA1WP-LD-NT Natural 2.5, 6, 8, 12 oz - Wiper LDPE EA1WP-LD-BL Blue 2.5, 6, 8, 12 oz - Wiper LDPE

EA1WP-LD-BK Black 2.5, 6, 8, 12 oz - UV Blocking Wiper LDPE DISPENSING CONSUMABLES EA110WP-LD-NT Natural 1/10th gallon - Wiper LDPE EA200WP-LD-NT Natural 20 oz - Wiper LDPE EA200WP-HD-NT Natural 20 oz - Wiper HDPE Cartridge Caps End and tip caps are designed to seal out air for proper storage and handling purposes. Available in snap on, push on, and threaded styles.

Item Number Description EA2C 2.5, 6, 8, 12 oz - End Cap LDPE EA110CP 1/10th gallon - End Cap LDPE EA6C 20 oz - End Cap LDPE EA3P Threaded Tri-Seal Cap PE EA4P Threaded Tip Cap PE EA5P Snap On Tri-Seal Tip Cap PE EA9X Snap On Tip Cap PE Cartridge Tip Adapters Allows for the use of QuantX™ dispense tips with luer lock hubs. 1/4” NPT tip adapters for use with cartridges and valves fitted with 1/4” NPT female threads.

Item Number Description 5801420 Tip Adapter - Metal 5801449 Tip Adapter - Black Polypropylene 5801450 Tip Adapter - White Polypropylene

[email protected] 26 Cartridge Retainers & Caps Heavy duty, light-weight aluminum and nylon retainers can withstand up to 100 psi (6.9 bar) pressure. Cartridge retainers accommodate all corresponding cartridge sizes. Retainer caps sold separately.

Item Number Description Metal Cartridge Retainers 918-030-000 74 ml/2.5 oz Cartridge Retainer

918-031-000 177 ml/6 oz Cartridge Retainer

918-034-000 237 ml/8 oz Cartridge Retainer

918-032-000 355 ml/12 oz Cartridge Retainer

5601376 Retainer Cap with Sealing Ring/Fittings

5601377 Retainer Cap with Regulator Gauge

5601378 Seal for Retainer Cap

5601357 Connecting Hose (5 ft)

Item Number Description Nylon Cartridge Retainers 5801379 2.5 oz Cartridge Retainer Body

5801380 6 oz Cartridge Retainer Body

5801381 8 oz Cartridge Retainer Body

5801382 12 oz Cartridge Retainer Body

5801376-SEAL Seal for Retainer Cap DISPENSING CONSUMABLES 5801376 Retainer Screw Cap with Fittings

5801377 Retainer Cap with Regulator Gauge

5601357 Connecting Hose (5 ft)

Cartridge Retainer Stands

Item Number Description

2.5, 6, 8, 12 oz Metal Retainer 560535 Cartridge Stand

2.5, 6, 8, 12 oz Nylon Retainer 560535-NU Cartridge Stand

27 www.fisnar.com 1/10th Gallon Plastic Retainer & Cap The 580091H-A is an economical retainer designed to dispense from standard caulking cartridges. Dispensing can be delivered with fine gauge luer lock tips or with larger nozzles. Dispensing pressure should not exceed 65 psi (4.48 bar).

Item Number Description

Plastic Cartridge Retainer Assembly 580091H-A (Retainer, Cap, Seals, and Hose)

580091H-CF 1/10th gallon Cap with Fittings DISPENSING CONSUMABLES

5601357 Connecting Hose (5 ft)

560655 Rubber Seal

562027 Plastic Spacer Nylon Cartridge Retainer Assemblies Durable, nylon molded, screw cap retainers are lightweight and can withstand up to 100 psi (6.9 bar) pressure. Cartridge retainers accommodate 2.5, 6, 8, and 12 oz cartridges. Compatible with Techcon, Semco, and EFD-style cartridge systems. Retainer, cap, and hose complete with each kit.

Item Number Description

2.5 oz Cartridge Retainer Assembly 5801379-KIT with Hose

6 oz Cartridge Retainer Assembly 5801380-KIT with Hose

8 oz Cartridge Retainer Assembly 5801381-KIT with Hose

12 oz Cartridge Retainer Assembly 5801382-KIT with Hose

5801376 Retainer Screw Cap with Fittings

5601357 Connecting Hose (5 ft) Cartridge Retainer Stands

Item Number Description

2.5, 6, 8, 12 oz Nylon Retainer 560535-NU Cartridge Stand

[email protected] 28 CR300 1/10th Gallon Cartridge Retainer The CR300 was developed with a new seal design, for greater seal performance and durability by sealing directly onto the inside of the inserted cartridge. Fully compatible with 1/10th gallon plastic and metal caulking type cartridges (300/310 ml). This high-grade anodized alloy retainer and cap ensures a safe, comfortable dispensing pressure of up to 100 psi (6.9 bar). With high performance and unique versatility, this retainer can be used as a pressurized fluid reservoir system in conjunction with a Fisnar dispense valve. Hose included standard with CR300. Features • Supplied with a universal air-inlet for effortless system installation and integration • Designed for long lasting use *560549U stand sold separately. • Quick and easy screw on cap can be attached directly to a Fisnar air-powered dispenser Item Description • Optimized tube design reduces cartridge expansion Number while decreasing risk of air ingression into the fluid Cartridge Retainer Assembly CR300 • Works efficiently with 1/10th gallon cartridge adapter (Retainer, Cap, Seals, and Hose) nuts to convert the male thread on a standard caulking CR300-SEAL Retainer Cap Sealing Ring type cartridge to a conventional female 1/4” NPT thread 560549U Cartridge Retainer Stand

562146 Quick Connect Hose (6 ft)

DISPENSING CONSUMABLES Cartridge Adapter Nuts Used for converting male thread on a 310 ml (1/10th Accessories (Sold Separately) gallon) cartridge to a 1/4” NPT female thread. 1/4” NPT Item Description nozzles, tip adapters, or fittings can be connected to allow Number material dispensing directly from the cartridge. 560549U Cartridge Retainer Stand

Item Number Description 562146 Quick Connect Hose (6 ft) Cartridge Adapter 1/4” NPT x 5/8”-11 UNC 561129-SS 316 Stainless Steel Cartridge Adapter 1/4” NPT x 5/8”-11 UNC 561129 White Acetal Cartridge Adapter 1/4” NPT x 13/16-14 UNC 562317 Black Acetal Cartridge Adapter 1/4” NPT Female 560546 Polyethylene

29 www.fisnar.com CR570 20 oz Cartridge Retainer The CR570 Cartridge Retainer has been designed for use with Techcon, Semco, and EFD 20 oz plastic cartridges. The new seal design delivers greater performance and durability by sealing directly onto the inside of the inserted cartridge.

The high grade anodized aluminium retainer and cap provide a safe dispensing pressure of up to 100 psi (6.9 bar). The high performance DISPENSING CONSUMABLES heavy duty design also makes this system ideal for use in industrial environments and ensures long lasting use. Hose included standard with CR570. Features • Compatible for use with Techcon, Semco, and EFD 20 oz cartridges • Machined slots in retainer body allow for the fluid level inside the inserted cartridge to be easily monitored • Optimized tube design reduces cartridge *560534U stand sold separately. expansion while decreasing the risk of air ingression into the fluid Item Number Description • Quick connect air-inlet connector allows for Cartridge Retainer Assembly the safe removal of compressed air from the CR570 retainer when replacing the cartridge (Retainer, Caps, Seals, and Hose) • Can be attached directly to a Fisnar dispense CR570-SEAL Retainer Cap Sealing Ring controller or used as a valve fluid feed system/ 562146 Quick Connect Hose reservoir

Accessories (Sold Separately)

Item Number Description

560534U 20 oz Cartridge Retainer Stand

[email protected] 30 Manual & Pneumatic Cartridge Dispensers

A range of manual and pneumatic dispensers for use with most standard and prefilled cartridges.

• FMG-25, FLG-25, FPG-25, FMG-60, FLG-60, FPG-60, FMG-80, FLG-80, FPG-80, FMG-120, FLG-120, and FPG- 120 dispenser kits are compatible with Techcon, Semco, and EFD-style 2.5, 6, 8, and 12 oz cartridge systems • FMG-25T, FMG-60T, FMG-80T, and FMG-120T dispenser kits are compatible with Techcon style 2.5, 6, 8, and 12 oz cartridge systems • FPG-300 dispenser kit is compatible with all standard plastic 1/10th gallon (300 ml) caulking-style cartridge systems DISPENSING CONSUMABLES

31 www.fisnar.com Manual Dispensers - Nylon Retainer

Item Number Description

FMG-25 2.5 oz Manual Dispenser Kit

FMG-60 6 oz Manual Dispenser Kit

FMG-80 8 oz Manual Dispenser Kit

FMG-120 12 oz Manual Dispenser Kit DISPENSING CONSUMABLES

Manual Dispensers - Metal Retainer Item Number Description

FMG-25T 2.5 oz Manual Dispenser Kit

FMG-60T 6 oz Manual Dispenser Kit

FMG-80T 8 oz Manual Dispenser Kit

FMG-120T 12 oz Manual Dispenser Kit

Lever Actuated Dispensers - Nylon Retainer Item Number Description

FLG-25 2.5 oz Lever Actuated Dispenser Kit

FLG-60 6 oz Lever Actuated Dispenser Kit

FLG-80 8 oz Lever Actuated Dispenser Kit

FLG-120 12 oz Lever Actuated Dispenser Kit

Pistol Grip Dispensers - Nylon Retainer Item Number Description

FPG-25 2.5 oz Lever Actuated Dispenser Kit

FPG-60 6 oz Lever Actuated Dispenser Kit

FPG-80 8 oz Lever Actuated Dispenser Kit

FPG-120 12 oz Lever Actuated Dispenser Kit

FPG-300 300 ml Pistol Grip Dispenser Kit (Metal Retainer)

[email protected] 32 Manual Barrel Loaders The 560548U Series of manual barrel loaders will fill a barrel directly from a 6 oz, 12 oz, 20 oz, or 300 ml cartridge. Barrel loaders are connected to an air regulator and set to a pressure suitable for the material not exceeding 65 psi (4.48 bar). A manual switch on the base actuates the air supply and pressurizes the cartridge to fill the syringe barrel. The barrel fillers’ internal air relief valve allows for decompression when the trigger is released. The system can be used for timed filling when connected to a Fisnar automatic controller.

Item Number Description

560548U-6N 6 oz Nylon Barrel Loader

560548U-12N 12 oz Nylon Barrel Loader

560548U-300 300 ml Metal Barrel Loader

560548U-570 20 oz Metal Barrel Loader

Replacement Parts Item Number Description DISPENSING CONSUMABLES 561105 1/4” NPT Elbow

5801451 Syringe Filling Adapter

560710 Luer Lock Cap

1/4” NPT Polyethylene Female 560546 Cartridge Adapter

1/4” NPT x 5/8-11 UNC White 561129 Acetal Cartridge Adapter

1/4” NPT x 13/16-14 UNC Black 562317 Acetal Cartridge Adapter

Syringe barrel and piston sold separately.

33 www.fisnar.com

Liquid Dispensers

[email protected] 36 SL101N Standard Dispenser An automatic digital dispenser with a bright LCD display and “teach and learn” process programming feature. Up to 9 independent dispensing programs may be stored for fast recall.

Modes: Manual Mode: The dispense operation is manually controlled by a foot pedal. Timed Mode: Dispenses at a pre-set time. Auto Cycling Mode: Combines a dispense time and pause time and will continue to repeat the cycle until foot pedal is Push-to-connect style fitting standard actuated. on SL101N controller.

Features Item Number Description • Digital timer for precise and repeatable dispense control SL101N Standard Digital Dispenser • Durable aluminum housing designed for industrial work environments Specifications

• Vacuum suck-back control to prevent fluid Dispense Time 0.01 - 9999s

DISPENSERS dripping from dispense tip Cycle Manual, Timed, Cycle • 9 programmable memory storage locations Internal Memory 9 save locations Air Input 70 - 100 psi Air Output 1 - 100 psi Voltage 100 - 240 VAC, 50/60 Hz

Dimensions 219.2 x 215.9 x 66.8 mm (WxDxH) (8.63 x 8.50 x 2.63”)

Weight 1.59 kg (3.5 lb) Standards RoHS

Item Number Description

560021U Syringe Barrel Stand Stand sold separately.

37 www.fisnar.com DC50 General Purpose Dispenser A general purpose, easy to use digital dispenser with a bright 4-digit LED display. The simple, user friendly programming enables a dispense cycle to be quickly created and automatically displayed.

Modes: Manual Mode: The dispense operation is manually controlled by a foot pedal. Timed Mode: Dispenses at a pre-set time for controlled, repeatable shot sizes.

Features Push-to-connect style fitting standard • 1 programmable memory slot on DC50 controller. DISPENSERS • 0-100 psi pressure regulator gauge Item Number Description • 2 dispense modes (manual & timed) • Worldwide compatible power supply DC50 General Purpose Digital Dispenser • 4 digit LED display (0 to 9999s) • Durable aluminum housing designed for Specifications industrial work environments Input AC to Power 100 - 240 VAC, 50/60 Hz • Simple, compact & easy to use design Supply Output DC from 24 VDC - 1 Amp Power Supply Cycle Rate Up to 600 cycles/min Relative Humidity 20 - 90% (No Condensation) Operating 50 - 104 °F (10 - 40 °C) Temperature Timer 0.008 - 99.99s Air Input 100 psi (7 bar) max Air Output 1 - 100 psi (0.07 - 7 bar) Dimensions 192 x 128 x 76 mm (WxDxH) (7.56 x 5.04 x 3.00” ) Weight 0.97 kg (2.14 lb) Standards CE Approved, RoHS Compliant Item Number Description

560021U Syringe Barrel Stand Stand sold separately.

[email protected] 38 DC100 High Precision Dispenser A versatile, high precision dispenser designed to suit a wide variety of dispensing applications: from microdot deposits and lines, to large potting and filling. Integral and intelligent dispense software allows the user more control over dispensing applications. Programmable alarms can be set to notify the user when material life has ended or fluctuations in dispensing pressure have occurred. The user- friendly programming allows for up to 10 saved Push-to-connect style fitting programs and 5 different dispense modes. standard on DC100 controller.

Features Item Number Description • 10 programmable memory slots DC100 High Precision Digital Dispenser • Air input alarm can be set for monitoring consistent air input pressure, 5 dispense modes (purge, teach, timed, time+, Int.) Specifications • Worldwide compatible power supply Cycle Rate 600+ cycles/min • Multilingual display Dispense Time 0.008 - 9999s • Digital display (time, pressure, vacuum) Programs 10 Memory Slots

DISPENSERS • Dispense cycle counter Input AC to Power 100 - 240 VAC, 50/60 Hz Supply • Programmable alarms Output DC from • Internal pressure and vacuum calibration 24 VDC - 0.75 Amp Power Supply function • Selectable pressure and vacuum measurement Air Input 70 - 100 psi (7 bar) max units Air Output 1 - 100 psi (0.07 - 7 bar)

Operating 50 - 104 °F (10 - 40 °C) Temperature

Relative Humidity 20 - 90% (No Condensation) Dimensions 191.3 x 179.1 x 71.9 mm (WxDxH) (7.53 x 7.05 x 2.83”) Weight 0.92 kg (2 lb) CE Approved, RoHS Standards Compliant

Item Number Description

560021U Syringe Barrel Stand Stand sold separately.

39 www.fisnar.com Pistol Grip Switch Assemblies The pistol grip electronic switch assembly is designed to hold a metal cartridge retainer or 790HP valve. Allows better dispense control while reducing operator fatigue. Comes in two 3-pin configurations depending on controller connection point in back of unit.

Cartridge Pistol Grip Assembly 790HP Valve Pistol Grip Assembly Item Number Description Item Number Description

560598 For use with SL101N 560565 For use with SL101N

560598DC For use with DC50/DC100/DC200 560565DC For use with DC50/DC100/DC200 DISPENSERS

Metal retainer and 790HP valve sold separately.

Finger Switches Designed for use in situations where it is not convenient to use a foot pedal or for operators who prefer finger switches when actuating the dispense controller. These finger switches are easily adjustable and can be fitted to a wide range of cartridges, retainers, and barrels.

Cartridge Retainer Switches Barrel Switches Item Number Description Item Number Description

FS-501V For use with SL101N 560023-LF For use with SL101N

FS-501VDC For use with DC50/DC100/DC200 560023-LFDC For use with DC50/DC100/DC200

Metal retainer, syringe barrel, and receiver head sold separately.

[email protected] 40 PPD-130 Peristaltic Pump Dispenser Peristaltic pump dispensers transfer low-viscosity liquids by pressure displacement applied to a turning rotor against a tube-carrying fluid. The PPD-130 offers excellent features for air-free positive displacement dispensing of materials, such as cyanoacrylates, solvents, acids, and other low-viscosity fluids. Dispense outputs can be timed from 0.01 to 99.99 seconds with flow speeds from 0.01 to 6 ml/min using PTFE tubing. The pump is bidirectional allowing snuff-back after discharge to prevent dripping. DISPENSERS Item Number Description

PPD-130 Peristaltic Pump Dispenser

Features Specifications • Forward and reverse motion Cycle Rate 0.01 - 99.99s • Adjustable interval before reverse direction Flow Speed 0.01 - 6 ml/min • Continuous or timed modes Rotor Speed Up to 120rpm • Output signal to indicate end of cycle Dispense Pressure Over 105 kg/cm2 • Large segment digital LED display Connection for Remote I/O • Air-free dispensing Operation • Instant reverse for snuff-back of liquid flow Input Voltage 110 - 240 VAC, 50/60 Hz Dimensions 182.4 x 81.3 x 170.9 mm (WxDxH) (7.18 x 3.20 x 6.73”) Weight 2.99 kg (6.6 lb) Standards CE Approved, RoHS Compliant

41 www.fisnar.com PPD-130 Accessories The PPD-130 comes with a range of accessories, tubing, and nozzles. Optional pump heads and foot pedal available for advanced application requirements. Comes supplied with standard pump head 562030-T.

Included Accessories Item Number Description Item Number Description 560989-D Nozzle Holder (with switch) 560984P-10FT 10 ft (304.8 mm) 1.0 x 1.6 mm

561010-D Nozzle 1.7 mm diameter 560985P-10FT 10 ft (304.8 mm) 1.4 x 2.0 mm

561011-D Nozzle 2.1 mm diameter 560995P-10FT 10 ft (304.8 mm) 1.9 x 2.5 mm DISPENSERS

561012-D Nozzle 2.6 mm diameter 560996A-10FT 10 ft (304.8 mm) 2.4 x 3.0 mm

561013-D Nozzle 3.5 mm diameter 562031-D 9-pin connector Sold Separately Item Number Description 562032-D Foot Pedal (optional)

Tubing, Nozzles & Optional Pump Heads Standard Pump Head Suitable Nozzle Item Number Clear Tubing Black Tubing I.D. x O.D. (mm) Nozzle Type Dimensions 562030-T 560984P-10FT 560984BA-10FT 1.0 x 1.6 561010-D 1.7 mm

562030-T 560985P-10FT 560985BA-10FT 1.4 x 2.0 561011-D 2.1 mm

562030-T 560995P-10FT 560995BA-10FT 1.9 x 2.5 561012-D 2.6 mm

562030-T 560996A-10FT 560996BA-10FT 2.4 x 3.0 561013-D 3.5 mm Optional Pump Head Suitable Nozzle Item Number Clear Tubing Black Tubing I.D. x O.D. (mm) Nozzle Type Dimensions 562030-M 560997P-10FT 560997BA-10FT 0.25 x 0.75 - -

562030-S 560998A-10FT 560998BA-10FT 0.50 x 1.00 561008-D 0.9 mm

562030-S 560999A-10FT 560999BA-10FT 0.60 x 1.00 - -

[email protected] 42 ATD200C Autotube Dispense Kit The autotube system was designed to dispense liquids, pastes, greases, silicones, and similar materials directly from the manufacturer’s collapsible metal tubes (max size 1.5” diameter x 7.25” length).

Dispensing is controlled by either a foot valve or timed For small and large metal dispenser for a controlled shot. squeeze tubes. The autotube assembly can be handheld, utilized with pistol grip handle, or mounted on a stand.

Features • Eliminates waste • Improves operator safety • Prevents tube damage • Clean and easy dispense method • Reduces risk of contamination

ATD200C DISPENSERS Item Reference Description Number ID 5601357 Connecting Hose (5 ft) -

560517A 8 oz Cartridge 3

Controller and squeeze tubes 918-034-000 8 oz Cartridge Retainer 2 sold separately. 5601376 Retainer Cap 6 Pistol Grip Handles (sold separately) A-10001-OT Luer Lock Tip Adapter 5 560598DC 560598 880001-A Adapter M13x1 4 Use with DC-style Use with non-DC-style 880001-B Adapter M14x2 4 Controllers Controllers 880001-C Adapter M12x1.75 4

880001-D Adapter M18x1.25 4

880001-BLANK No Thread Adapter 4

QK-NSK Needle Selection Kit -

43 www.fisnar.com TD101 Pneumatic Tube Dispenser The TD101 dispenser is engineered to specifically address the waste and discomfort that result from dispensing materials in collapsible tubes. Its comfortable, balanced design protects the tube from damage and the operator from material contact.

Item Number Description

TD101 Pneumatic Tube Dispenser Specifications

Maximum Tube Size 7.38” Features Cycle Manual (trigger actuated) • Eliminates waste when dispensing from tubes Start Pressure Recommended 20 psi (1.38 bar) • Avoids material contamination Maximum Pressure 50 psi (3.45 bar)

• Improves operator safety DISPENSERS 190.5 x 76.2 x 171.5 mm Size • Prevents tube damage (7.5 x 3 x 6.75”) Weight 272 g (0.6 lb) without tube Dispensing Configurations:

Using the Supplied Nozzle Using with Luer Lock Tips Item Item Description Reference ID Description Reference ID Number Number 910-TN Nozzle 1 560707 Adapter Nut 13 560699 Nozzle Nut 2 880001-A Adapter M13 x 1 16 560698 O-Ring 3 880001-B Adapter M14 x 2 16 560697 Lock Ring 4 880001-C Adapter M12 x 1.75 16 560696 Retaining Ring 5 880001-D Adapter M18 x 1.25 16 560695 Seal 6 880001-BLANK No Thread Adapter 16 560702 Cap Only 10 QK-NSK Needle Selection Kit Not Shown - Tube (not included) 12 A-10001-OT Luer Lock Adapter 5 560702 Cap Only 10 - Tube (not included) 12

[email protected] 44

DTD50 50 ml Dispenser The DTD50 is a pneumatically controlled dispense tool for precisely dispensing two component materials packaged into 50 ml dual cartridges. With its simple design and operation, accurate and repeatable fluid deposits are quickly and easily created when connected to a dispense controller. DC100 controller, cartridge, and mix nozzle sold separately.

Item Number Description

DTD50 50 ml Dispenser Square Back DISPENSERS DTD50 for use with DTD50-RB for use with DTD50-RB 50 ml Dispenser Round Back (S-Flange) square back cartridges round back cartridges

Features Specifications • Lightweight and durable design Air Input 1 - 100 psi (6.9 bar) • Use as a handheld device or mounted on a 139.7 x 58.4 mm Dimensions stand or robot for hands-free dispensing (5.5 x 2.3”) • Suitable for all ratio sizes including: 1:1, 2:1, 4:1, Weight 280 g (0.6 lb) and 10:1 Material Aluminum and Acetal Dispensing Configurations: Finger Switch Pistol Grip Stand Mounted Robot Mounted Actuated Hand Assembly Assembly Assembly (FS-501V or FS-501VDC) (560565 or 560565DC) (562043U) (5601800U)

All items shown sold separately.

[email protected] 46 Dual Cartridge Dispense System The dual cartridge dispense system (DCD) is an excellent, cost- effective solution for low-volume mixing and dispensing of two component materials supplied in dual cartridges. The fully portable bench-mounted system is simple to set up and program for accurate two-component dispensing. DCD systems include a pneumatically actuated piston dispenser which applies pressure to accurately dispense materials contained in a dual cartridge.

Models Optional controller sold separately for timer Item Description controlled dispensing. Number DP50-1 50 ml Cartridge System

DP200-1 200 ml Cartridge System

DP400-1 400 ml Cartridge System

Features Specifications DISPENSERS • Mounted on a robust bench support to allow for Air Input 70 - 100 psi height and angle adjustment when dispensing Air Output 1 - 100 psi • Includes 710PT-U pinch valve for increased accuracy and drip-free dispensing of low Pressure Adjustments Variable viscosity materials Pneumatic Connections 1/4” • Supplied foot pedal allows for hands-free operation Weight (without foot pedal) 14.5 kg (32 lb) Foot Pedal Weight 1.8 kg (4 lb) DP50-1 Weight 0.7 kg (1.45 lb) DP200-1 Weight 1.6 kg (3.52 lb) DP400-1 Weight 2.2 kg (4.85 lb) Machine Directive 2006/42/EC

47 www.fisnar.com DB815-SB Foot Dispenser The DB815-SB foot dispenser is a basic air powered dispensing system. Floor stationed and foot actuated, fluid will be dispensed only when the foot pedal is pressed. A three-way air valve is included along with a built-in air regulator. The suck-back control ensures that low viscosity liquids do not drip. Suitable for dispensing all types of fluids. DISPENSERS

Syringe assembly sold separately.

Item Number Description

DB815-SB Foot Dispenser

Features Specifications • Economical and simple to use Cycle Maintained by User • Suitable for a wide range of applications Foot Pedal Air Valve in Unit • Barrel suck-back control Air Input 70 - 100 psi • All pneumatic operation Air Output 1 - 100 psi

Dimensions 114.3 x 215.9 x 136.7 mm (WxDxH) (4.5 x 8.5 x 5.38”)

Weight 1.72 kg (3.8 lb)

[email protected] 48 VPPE511-LF Vacuum Pick-Up System This vacuum pick-up system is designed for delicate handling of small parts and components including miniature, surface mount, and chip scale packages. Features an air solenoid vacuum electrically activated by pressing a foot pedal. Features • Foot pedal controlled Specifications • Adjustable suck-back control • Vacuum pressure readout Cycle Foot Pedal Control • 560046LL-NH for use with VPPE511-LF Air Input 20 - 100 psi Vacuum Vacuum Gauge Display Models 139.7 x 177.8 x 66.8 mm Size Item Number Description (5.5 x 7 x 2.63”) VPPE511-LF Electric Vacuum Pick-Up System Weight 1.14 kg (2.5 lb) VPP803-LF Non-Electrical Vacuum Pick-Up System VPP803-LF Vacuum Pick-Up System The VPP803-LF vacuum pick-up system is designed for delicate handling of small parts and components including miniature, surface mount, and chip scale packages. The VPP803-LF is a non-electrical unit that has a vacuum pencil with a small hole that creates a vacuum.

DISPENSERS Features • Adjustable vacuum control Specifications • Manually actuated Cycle Continuous • All pneumatic operation Air Input 20 - 100 psi • 560046LL for use with VPP803-LF Vacuum Up to 16 in hg Vacuum Pick-Up Systems Accessories 95.3 x 177.8 x 66.8 mm Size Item Number Description (3.75 x 7 x 2.63”) 560047 Vacuum Pad 0.140” (3.5 mm) Weight 0.34 kg (0.75 lb) 560048 Vacuum Pad 0.200” (5.1 mm) 560049 Vacuum Pad 0.250” (6.4 mm) 560050 Vacuum Pad 0.320” (8.1 mm) 560051 Vacuum Pad 0.400” (10.2 mm) 560052LL Vacuum Tip #14 0.063” (1.6 mm) 560053LL Vacuum Tip #18 0.033” (0.84 mm) 560054LL Vacuum Tip #21 0.020” (0.51 mm) 560046LL Vacuum Pick Up Pencil 560046LL-NH Vacuum Pick Up Pencil (no hole)

49 www.fisnar.com 700PTPCW Pinch Tube Pen Pinch tube pens are ideal applicators for manually dispensing continuous beads or applying microdots of low viscosity liquids such as solvents and cyanoacrylates. The disposable pinch tube is the only part of the pen that is in contact with the material and discarded when contaminated. The pinch tube pen can be connected via a wide range of interchangeable fittings to gravity fed or pressurized reservoirs.

Replacement Parts & Accessories Included with Item Number Description 700PTPCW 5601390 Luer Lock Adapter - White Yes 580045A Pinch Tube (I.D. 0.10” x 4.10” long) - Clear Yes DISPENSERS 580047A-07-24 Fluid Line PE (I.D. 0.07” x 24” long) - Clear No 580047A-10-18 Fluid Line PE (I.D. 0.10” x 18” long) - Clear No 580047A-10-24 Fluid Line PE (I.D. 0.10” x 24” long) - Clear Yes 580047A-10-36 Fluid Line PE (I.D. 0.10” x 36” long) - Clear No

580045A-BLK Pinch Tube (I.D. 0.10” x 4.10” long) - Black No IJ2601N-SS-SP reservoir sold 580047A-BLK-07-24 Fluid Line PE (I.D. 0.07” x 24” long) - Black No separately. 580047A-BLK-10-24 Fluid Line PE (I.D. 0.10” x 24” long) - Black No 580047A-BLK-10-36 Fluid Line PE (I.D. 0.10” x 36” long) - Black No 560666 Gravity-Fed Bottle 500 ml gravity-fed bottle for use with low-viscosity fluids for dispensing small amounts of material. Replacement Parts Item Number Description

560666 500 ml Bottle with Luer Lock Cap 560670U Gravity Feed Bottle Stand 580047A Fluid Line PE 700PTPCW Pinch Tube Pen

Stand, pinch tube pen, fluid lines, and needle sold separately.

[email protected] 50

Dispensing Valves

[email protected] 52 VALVES (vertical) to theapplication (horizontal).(vertical) quick indentification of recommended and by matching type valves thefluid basedonmaterial chemistry ofvalvesA wideselection available for different typesandapplications. fluid isdesigned for Thischart Dispensing Valve Guide Selection 53 Cyanoacrylate urcn/i D1 MV-0180LF VD510 Lubricant/Oil Acid/Solvent -atEoy710PT-U 2-Part Epoxy 1-Part Epoxy VAhsv VD510-UV UV Adhesive odrPsePV10 D-00PDV-1000 PDV-1000 PDV-1000 Paste Solder RTV/Sealant Solder Mask Solder Grease/Gel Liquid Flux aeil osMcoDt ed/ie otn/iln Spray Potting/Filling Beads/Lines MicroDots Dots Materials Anaerobic Ink/Paint Reagent Paste PDV-1000, VMS400 VP300, 790HP-LF, VP300, 790HP-LF, MV-0180SS VD510-SS, PDV-1000 790HP-LF, 790HP-LF VMP30H 710PT-U 710PT-U 710PT-U 710PT-U VMS400 VMS400 VD510, VD510, VD510, VD510, VD510, CV629, VP300, MV-0180SS MV-0180SS MV-0180SS MV-0180SS MV-0180LF MV-0180LF MV-0180LF VD510-UV, VD510-SS, PDV-1000 PDV-1000 710PT-U VMS400 VD510, VD510, VD510 www.fisnar.com - PDV-1000, VMS400 VP300, 790HP-LF, VP300, 790HP-LF, MV-0180SS MV-0180LF VD510-UV, VD510-SS, PDV-1000 790HP-LF, 790HP-LF VMP30H 710PT-U 710PT-U 710PT-U 1P- 710PT-U 710PT-U 710PT-U VMS400 VMS400 VMS400 VD510, VD510, VD510, VD510, VD510, VD510, CV629, VP300, VP300, 790HP-LF, 790HPSS-LF 790HPSS-LF VD510-UV, VD510-SS, 790HP-LF 790HP-LF 790HP-LF 790HP-LF 790HP-LF 710PT-U 710PT-U VMS400 VMS400 VD510, VD510, VD510, CV629, VP300, VP300, VP300, VP300 VP300 - SV1000SS SV1000SS SV1000SS SV1000SS SV1000SS SV2000N, SV2000N, SV2000N, SV2000N, ------VALVES 54 • PZ-CON • • • • • Controllers [email protected] • •• • •••• ••• • • ••••• •• Valve & Controller Compatibility Chart Compatibility & Controller Valve VP300 CV629 VD510 Valves DC200 VC1195N SVC100 RVC900N PC200 I-Series VDP150 V-Series VMS400 710PT-U VMP30H SV2000N 790HP-LF VD510-SS SV1000SS PDV-1000 VD510-UV MV-0180LF MV-0180SS PosiPump™ PosiPump™ PosiPump™ PosiPump™ 790HPSS-LF Pz1200 Series VALVES (pinched) tubeandby thevalve control timer. degree ofadjustment inreleasing theclosed The shotsize orflow rate isdetermined by the allowing material to flow through the valve. causes the pinch tube to actuation open or close ofthevalve.and easyservicing Piston on/off The disposable pinchtubedesign allows for quick dispense volumes. ensures accurateadjustment knob andrepeatable liquids.viscosity The stroke easy-to-use control Engineered for precise control of low to medium 710PT-UPinch Tube Valve 55 Features • • • •

Easy t and cyanoacrylates Ideal f Suitable f Disposable pinchtubeandfluidlines o useandmaintain or longpotlife two component adhesives or low to fluids mediumviscosity www.fisnar.com Specifications Material Pressure Delivery Operating Air Pressure Weight Mounting Hole Detail Material Outlet Material Inlet Operating Air Wetted Materials Part Valve Seals Valve Stroke Adjustment Knob Valve Flange Cap Valve Cylinder Cap Valve Piston Valve Piston Shut-Off Valve Body Item Number Item Item Number Item *710PT-U valves come with rod formounting. 710PTU-RK 562054U 710PT-U Accessories Separately) (Sold Valve Construction Connecting Ports Pinch TubeValve Valve Kit Repair 1/4” Push Connector Description Description Valve Stand 114 g(0.25lb) Polyethylene Coated Steel 1/4”-28 UNC 100 psimax Aluminum Aluminum Aluminum 60 -75psi Luer Lock Luer Lock Acetal Nylon NBR VALVES 56 ilt the molded male end ilt the molded male T the pass by enough to push rod

3. Description ush dispense tube into place as shown, making as shown, place ush dispense tube into nsert shut off piston, spring, and threaded flange nsert and threaded spring, shut off piston, I making dispense sure body, valve into completely of body grooves into locked tube is securely P grooves into snapped shoulders are sure Accessories

4. 5. Pinch Tube Assembly (I.D. 0.10” (2.54 mm)) 0.10” (I.D. Assembly Tube Pinch Pinch Tube Assembly (I.D. 0.07” (1.778 mm)) 0.07” (I.D. Assembly Tube Pinch [email protected] Fluid Line PE (I.D. 0.10” x 18” long (2.54 x 457.2 mm)) - Clear x 18” 0.10” Line PE (I.D. Fluid long (2.54 x 609.6 mm)) - Clear x 24” 0.10” Line PE (I.D. Fluid long (2.54 x 914.4 mm)) - Clear x 36” 0.10” Line PE (I.D. Fluid Fluid Line PE (I.D. 0.10” x 24” long (2.54 x 609.6 mm)) - Black x 24” 0.10” Line PE (I.D. Fluid long (2.54 x 914.4 mm)) - Black x 36” 0.10” Line PE (I.D. Fluid Fluid Line PE (I.D. 0.07” x 24” long (1.778 x 609.6 mm)) - Clear x 24” 0.07” Line PE (I.D. Fluid Fluid Line PE (I.D. 0.07” x 24” long (1.778 x 609.6 mm)) - Black x 24” 0.07” Line PE (I.D. Fluid nsert male end of dispense R piston shutoff I side hole of tube through body valve

1. and spring, flange, emove 2. 580038A 580037A

Item Number 580047A-07-24 580047A-10-18 580047A-10-24 580047A-10-36 580047A-BLK-07-24 580047A-BLK-10-24 580047A-BLK-10-36

710PT-U Pinch Tube Valve Tube Pinch 710PT-U 710PT-U Pinch Tube Assembly Tube Pinch 710PT-U VALVES paints, UVadhesives, andothervolatile substances. anaerobics,dispensing cyanoacrylates, reagents, thevalve idealfor thusmaking the moving parts, The diaphragm separates the wetted parts materials. precise flow control oflow to mediumviscosity The VD510 isadiaphragm valve designed for Diaphragm ValveVD510 57 Features • • • • troke adjustment to finetuneshots •

P Suitable f Easily ser S S eparated wetted parts ositive shutoffdesign Item Number Item D1U-KValve UV Kit Repair VD510UV-RK VD510SS-RK VD510-RK 562043U Accessories (soldseparately) viceable or anaerobic fluids Valve SS Kit Repair Valve Kit Repair Description Valve Stand www.fisnar.com from Specifications Weight (VD510-SS) Weight (VD510/UV) Mounting Hole Detail Material Outlet Material Inlet Air Input Flow Rate Maximum Material Pressure Delivery Operating Air Pressure Wetted Materials Part Valve Piston Seal Valve Piston Valve Body Item Number Item D1-VUVSuitableDiaphragm Valve VD510-UV D1-SStainless Steel Diaphragm Valve VD510-SS VD510 Valve Construction Connecting Ports Models Diaphragm Valve Description 121 g(0.27lb) Aluminum/SS 69 g(0.15lb) 100 psimax UHMWE-PE 70 -100psi Luer Lock 0.3 L/min 1/8” NPT M5 x0.8 M5 x0.8 SUS303 NBR

VALVES Features MV-0180 Micro-Shot Needle MV-0180 Micro-Shot Valve 59 pressure, andtheduration that thevalve isopen. Shot size and flow rate are controlled by thetipsize, fluid either handheldorautomated applications. lightweight, grip makesthevalve pencil-type suitablefor from micro shotstobeadsanddots. moderate-sized Its fluids Designed for precision dispensingof low viscosity • • • ersion available for volatile andcorrosive •

M P S materials SS v troke adjustment to finetuneshotsize ositive shut-off ositive shut-off icro-shot deposits icro-shot OPERATING ADJUSTMENT STROKE AIR INLET MATERIAL INLET MATERIAL OUT 2 ND OPERATING AIRINLET (CLOSINGACTION WHEN 4-WAY VALVE ISUSED) www.fisnar.com Specifications Weight (MV-0180SS) Weight (MV-0180LF) Mounting Hole Detail Material Outlet Material Inlet Air Input Wetted Materials Part Valve Piston Seal Valve Piston Valve Body Material Pressure Delivery Operating Air Pressure Item Number Item V08S Stainless Steel Needle Valve MV-0180SS MV-0180LF Item Number Item V10SR Valve SS Kit Repair MV0180SS-RK MV0180LF-RK 560536U Accessories (soldseparately) Valve Construction Connecting Ports Models Aluminum Needle ValveAluminum Description Valve Kit Repair Description Valve Stand 173 g(0.38lb) Aluminum/SS Aluminum/SS 270 g(0.6lb) 120 psimax 70 -100psi Aluminum Luer Lock 1/8” NPT 1/8” NPT PTFE N/A VALVES 60 SS Luer Lock Luer Aluminum 70 - 100 psi 300 psi max O6 O.D. tube O6 O.D. tube O6 O.D. 135 g (0.3 lb) 1/8” BSPP with BSPP 1/8” M5 thread with M5 thread push in fitting for push in fitting push-in fitting for push-in fitting Valve Stand Valve Description Description Cartridge Valve Connecting Ports Connecting Valve Construction Valve Valve Stand (sold separately) Stand Valve 562166U CV629 Item Number Item Number Operating Air Pressure Air Operating Delivery Pressure Material Body Valve Needle Valve Operating Air Input Air Operating Inlet Material Outlet Material Weight Specifications [email protected]

icro-shot deposits igh flow rate igh flow eplaceable cartridgeeplaceable

M H S R

• • • shotsize finetune to adjustment troke • Features A simple design with accurate delivery. with accurate A simple design The CV629 is a pneumatically-operated valve CV629 valve The is a pneumatically-operated to of low dispensing precision for designed oils, solvents, such as medium viscosity materials, and more. inks, UV adhesives, silicones, CV629 Cartridge Valve VALVES SVC100 controller. This spray valve withthe isusedinconjunction is open. valve to thecomponent, andtheduration thevalve the fluid pressure, needlestroke, distance from the volume. Coating area and flow rate are controlled by adjust at thetop ofthevalve inorder to setthespray The flow rate is controlled thestroke- by turning applications.use incoating andmarking spraying flux,paint, oils, lubricants, and coatings for from volatile materials. Designed specifically for ofstainlesssteelconstructed to prevent corrosion spray dispensingof fluidsofup It is to 1000cps. The SV1000SS spray valve provides closetolerance Features SV1000SS Stainless Steel Spray Valve 61 • • controltroke-adjust •

A T S unable spray pattern djustable coating andflow rate OPERATING ATOMIZING AIR INLET AIR INLET MATERIAL OUT ADJUSTMENT MATERIAL STROKE INLET www.fisnar.com

Specifications Weight Material Inlet Operating/Atomizing Air Inlet Operating Frequency Nozzle Diameter Fluid Pressure Valve Seals Valve Body/Piston FluidRange Viscosity Atomizing Air Pressure Operating Air Pressure Item Number Item SV1000SS Item Number Item SV1000SS-RK SV1000SS valve comes with rod formounting. 562054U Accessories (soldseparately) Valve Construction Connecting Ports Description Spray Valve Valve Kit Repair Description Valve Stand Up to 1,000 cps 344 g(13.5lb) 1 -30psimax 70 -100psi cycles/min 1 -100psi Up to 200 1/8” NPT 10 -32 0.028” PTFE SS VALVES 62 SS SS PEEK 10 - 32 1/8” NPT 1/8” Up to 400 Up to 1 - 100 psi UHMW-PE cycles/min 70 -100 psi 236 g (0.5 lb) SV2001N: 20° SV2002N: 30° SV2003N: 37° 1 - 30 psi max Up to 1,000 cps Up to Description Spray Valve Fan Pattern Fan Valve Spray Spray Valve Medium Bead Valve Spray Spray Valve Fine Dot & Bead Fine Valve Spray Models Connecting Ports Connecting Valve Construction Valve Item Number Valve Body/Piston Valve Needle Valve Diaphragm Valve Seat Valve Pressure Fluid Frequency Operating Spray Angle Spray Inlet Air Operating/Atomizing Inlet Material Weight Operating Air Pressure Air Operating Pressure Air Atomizing Viscosity Range Fluid SV2001N SV2002N SV2003N Specifications [email protected] OUT INLET AIR INLET OPERATING MATERIAL MATERIAL Valve Stand Valve Description Valve Repair Kit Valve AIR INLET ATOMIZING Accessories (sold separately) Accessories 562054U SV2000N-RK SV2000N valve comes with rod for mounting. with rod comes SV2000N valve Item Number

djustable coating and flow rate and flow djustable coating unable spray pattern pattern unable spray

A S T

• • • troke-adjust control area. area. spray selection based on required Valve Used in conjunction controller. with the SVC100 The SV2000N series are no-clog spray valves and work no-clog and work SV2000N series are The valves spray typically than less materials, low-viscosity with best valve the spray to Material is typically fed 1000 cps. is actuated by Each valve reservoir. a pressure from operating The a controller. by sequenced pressure air material allowing valve opens a needle air pressure in pressure airline creates separate a while flow, to the fluid. atomizing the cap, SV2000N Adjustable Spray Valve Spray Adjustable SV2000N Features VALVES Features life ofthevalve seals. itidealfor filledmaterials the making and extending between thevalve pistonfriction andthematerial, areaThe and poppet design minimizes surface areas. design isbeneficial for installation in confined work materials. lightweightviscosity andcompact Its designed for dispensingsmall shotsofmedium The VMP30H is a pneumatic, mini poppet PoppetVMP30H Mini Valve 63 • • • -back effect to eliminate drooling at the •

size S S Suitable f end oftheneedletip Suck troke adjustment feature for finetuningshot eparated wetted parts or filledmaterials www.fisnar.com valve Specifications Flow Rate Material Pressure Delivery Operating Air Pressure Weight Material Outlet Material Inlet Air Input O-ring Diaphragm, Seal Chamber, Cap Valve Piston Seal Valve Piston Valve Body Item Number Item VMP30H Item Number Item VMP30H-RK 562235U Accessories (soldseparately) Wetted Materials Part Valve Construction Connecting Ports Mini-Poppet Valve Description Valve Kit Repair Description Valve Stand MAX 1.2L/min 162 g(0.36lb) 70 -100psi 85 psimax Aluminum UHMW-PE Luer Lock 1/8” NPT M5 x0.8 SUS303 SUS303 Viton® NBR VALVES 64 NBR Viton® SUS303 M5 x 0.8 M5 x 0.8 1/8” NPT 1/8” NPT 1/4” UHMW-PE Aluminum Aluminum 85 psi max 70 - 100 psi 180 g (0.4 lb) Valve Stand Valve Description Valve Repair Kit Valve Poppet Valve Poppet Description Connecting Ports Connecting Valve Construction Valve Wetted Part Materials Wetted Accessories (sold separately) Accessories 562043U VP300-RK VP300 Item Number Item Number Valve Piston Seal Piston Valve Cap Chamber, Seal Diaphragm, O-ring Inlet Air Inlet Material Outlet Material Hole Mounting Weight Valve Body Valve Piston Valve Operating Air Pressure Air Operating Delivery Pressure Material Specifications [email protected] or filled materials or filled materials

eparated wetted parts wetted eparated troke adjustment to fine tune shot size fine to adjustment troke

S S Suitable f Suck of the needle tip

• • • at theend drooling to prevent -back effect • Features Its piston design maximizes fluid flow rate, while its rate, flow fluid Its maximizes design piston durability. valve enhances sealing mechanism The VP300 is a multi-purpose, poppet-style, poppet-style, is a multi-purpose, VP300 The medium to dispensing for designed valve pneumatic grease, epoxy, high viscosityas silicone, liquids such and other filled materials. solder paste, VP300 VP300 Valve Poppet VALVES Features valve isopen. size, fluidpressure, andtheduration that the Shot size and flow rate are controlled by thetip forced forward andfluidwillbedispensed. to theairinlet of thevalve, the spoolwillbe materials.viscosity When air pressure is applied dispensing smallvolumes ofmediumto high The VMS400 isaminispoolvalve designed for Spool VMS400 Mini Valve 65 • • • igh-pressure fluidinputup to 700psi •

corrosive materials S A Suitable f H tainless steel wetted parts tainless forsteel wetted volatile parts and djustable suck-back or high viscosity fluids or highviscosity www.fisnar.com Specifications Weight Material Outlet Material Inlet Air Inlet Valve Seal Valve Chamber, Cap Valve Cap Valve Spool Valve Body, Piston Operating Air Pressure Item Number Item Item Number Item VMS400-RK 562235U VMS400 Accessories (soldseparately) Wetted Materials Part Valve Construction Connecting Ports UHMW-PE LipSeal Mini Spool Valve Mini Valve Kit Repair Description Description 255 g(0.56lb) Valve Stand 70 -100psi Aluminum Luer Lock 1/8” NPT M5 x0.8 SUS303 SUS420 SUS303 VALVES 66 Viton® 1/4” NPT 1/4” NPT 1/4” NPT 1/4” UHMW PE Aluminum 70 - 100 psi 2,500 psi max Aluminum/SS 524 g (1.16 lb) 744 g (1.64 lb) SS (TiCN coated) Valve Stand Valve Description Valve Repair Kit Valve Valve Repair Kit SS Valve Description Models Connecting Ports Connecting Valve Construction Valve Accessories (sold separately) Accessories 560671U 790HP-RK 790HP-RKS Item Number Item Number 790HP-LFValve High Aluminum Pressure 790HPSS-LFValve High Steel Pressure Stainless Valve Body Valve Piston Valve Operating Air Pressure Air Operating Input Pressure Material Spool Valve Seals Valve O-ring Valve Air Input Air Inlet Material Outlet Material (790HP-LF) Weight (790HP-SS) Weight Specifications [email protected] or high-viscosity fluids or high-viscosity o clean and maintain ersion available for volatile and corrosive and corrosive volatile for ersion available

tra pneumatic air-port for use with 4-way air-port pneumatic use with 4-way tra for

Ex closure valve rapid for controller valve materials Easy t Suitable f SS v H

• • • • • to 2,500psi fluidinputup igh-pressure 790HP-LF Valve 790HP-LF High-Pressure A spring snap-back closes the valve retraction to prevent fluid outlet the at in a suck-back resulting dripping. The 790HP-LF high-pressure spool valve offers an offers spool valve high-pressure 790HP-LF The viscosityfor dispensing high solution effective and greases. sealants, such as silicones, materials Features VALVES Features chamber by theplunger. cps) asthematerial isdrawn into thedisplacement required for low-viscosity materials (lessthan5,000 air pressure Nofluidpressure to theairports. is flow of material,cycled the valve by isapplying Featuring two integral checkvalves to control the materials.medium viscosity constant volume shots up to 0.15 cc of low to displacement valve designed for dispensing The VDP150 is a pneumatically-operated positive VDP150 Positive Displacement Valve 67 • ositive displacement metering • •

S I P ntegral inlet/outletcheckvalves troke adjustment to finetuneshotsize www.fisnar.com Specifications Weight Material Outlet Material Inlet Air Input Check ValveO-rings Check Valve Valve Plunger Body & CV Valve Chamber, Cap Valve Check Body Valve Piston Valve Cylinder Body ShotMaximum Size Operating Air Pressure Item Number Item VDP150 Item Number Item VDP150-RK 562235U Accessories (soldseparately) Wetted Materials Part Valve Construction Connecting Ports Positive DisplacementPositive Valve Description SUS420 (tincoating) Valve Kit Repair SUS303, RULON Description 323 g(0.7lb) 0.15 cc/cycle Valve Stand 70 -100psi Aluminum Luer Lock 1/8” NPT SUS303 SUS303 M5X0.8 FFKM PEEK VALVES 68 SS SS 24 VAC 35,000 cps Aluminum Aluminum 212 g (0.5 lb) Assembly Valve Stand Valve Description Description 6 watt, 400rpm (no load) 6 watt, Elbow Replacement Tube Elbow Tube Replacement Models Accessories (sold separately) Accessories Item 561446B 562235U Number PDV-1000-8P (3,5,10,30/55 cc) Valve Auger 8 Pitch Item Number PDV-1000-16P (3,5,10,30/55 cc) Valve Auger 16 Pitch PDV-1000-32P (3,5,10,30/55 cc) Valve Auger 32 Pitch Motor Voltage Motor Motor Construction Valve Body Valve Auger Valve Bracket Syringe Valve Minimum Material Viscosity Weight Specifications [email protected] eed tube Comes standard with 3, 5, and 10 cc bushings. and 10 cc with 3, 5, standard Comes e – high repeatability

icro-shots less than 1 mm lexible coupling from motor to screw to motor from coupling lexible

No dead spac Disposable fluid f M F Ideal f

• • • • • materials andabrasive filled or heavily Features This auger valve is used in conjunctionRVC900N with the auger valve This controller. The PDV-1000 has zero dead space within the valve and can deliver accurate and accurate and can deliver within the valve dead space has zero PDV-1000 The or manually whether automated application, any for dots and beads repeatable operated. PDV-1000 PDV-1000 Valve Auger high viscosity epoxy, to medium is suitable for auger valve precision PDV-1000 The shots less Capable of dispensing micro filled materials. and other solder paste, an auger servothan 1mm using screw. driven motor VALVES Section View Section Features PosiPump™ Progressive I-Series Cavity Valve cycle thanksto aninfinitelycycle adjustablesuckback. Bi-rotational control ensures free adrip dispense inlet pressure. of any changesinfluidviscosity, thixotropy, orfluid a constant volume isalways dispensed, regardless A proven endless piston design ensures principle achieve exceptional levels ofrepeatability. offers true dispensinginordervolumetric to The PosiPump™ Progressive I-Series Cavity Valve 69 • • • • •

L FKM orFFKMS or fluid viscosity feed pressure Dispense v system C revolution Dispense v ong service life ong service onstant dispense volumetric & pressure-stable olume isnotaffected by changesin olume assmall0.008mlper tator Material www.fisnar.com displacement system. positivepressure-tight to create a self-sealing using arotor andstator endless piston principle valve isbasedonthe The Fisnar PosiPump™ Benefits See page73. See separately.Sold required foroperation. Connecting cable Endless Piston Principle • • • ipping/drooling dispensecycle after • •

Item Number Item H P for self-levelingnecessary low fluids viscosity P Suitable f No dr revents damageto fillersinfilledfluid materials ressurization of fluid feed system is not igh level ofprocess control CI0 Progressive Cavity Valve -0.5cc PC-I500 CI0Progressive Cavity Valve -0.05cc PC-I50 CI Progressive Cavity Valve -0.008cc PC-I8 or bothlow fluids &highviscosity Models Description VALVES 70 FKM 0.5 ml Viton® AL6061 SUS316 PC-I500 Luer Lock Luer 1 - 100 psi UHMW-PE 60 ml/min 1 - 120rpm 540 g (1.2 lb) Hard Anodize Hard (FFKM option) FKM Viton® PC-I50 0.05 ml AL6061 SUS316 6 ml/min Luer Lock Luer 1 - 100 psi UHMW-PE 1 - 120rpm 540 g (1.2 lb) Hard Anodize Hard (FFKM option) PC-I50/PCI500 [email protected] FKM PC-I8 Viton® AL6061 SUS316 0.008 ml Luer Lock Luer 1 - 100 psi UHMW-PE 1 - 120rpm 0.96 ml/min 380 g (0.8 lb) Hard Anodize Hard (FFKM option) 1/8” BSP / Luer Lock BSP / Luer 1/8” Lock BSP / Luer 1/8” Lock BSP / Luer 1/8” Stator Material Size Material Stator Rotor Material Rotor Inlet & Outlet Fluid Material Seal Material O-Ring Material Fluid Inlet Thread Fluid Outlet Thread Weight Fluid Input Pressure Fluid Max Flow Rate Max Flow Motor SpeedMotor Dosing Volume/Rev Item Number PC-I8 Specifications VALVES Section View Section Features to meetallstandard application demands. designed for use with three different mixertypes offluidoutletblocksareA variety available, results. ensure clean,consistent, andreliable dispense endless piston design and bi-rotational control the mixing ration to befinitely adjusted. The controlIndependent ofeachfluidmaterial allows component fluids. offers true two metervolumetric mixdispensing of The PosiPump™ V-Series Progressive Cavity Valve PosiPump™ProgressiveCavity Valve V-Series 71 • • • • • •

nozzles C L FKM orFFKMS or fluid viscosity feed pressure Dispense v system C Dispense v ong service life ong service ompatible with industry standard mixing ompatible withindustry onstant dispense volumetric & pressure-stable olume assmall0.016ml olume isnotaffected by changesin tator Material www.fisnar.com Benefits Item Number Item • • • ipping/drooling dispensecycle after • •

the mixingnozzle to valve motors inthe event in offluid curing Optional P for self-levelingnecessary low fluids viscosity P Suitable f No dr CV00Progressive Cavity Valve -1cc PC-V1000 CV5 Progressive Cavity Valve -0.55cc Progressive Cavity Valve -0.1cc PC-V550 PC-V100 revents damageto fillersinfilledfluid materials ressurization of fluid feed system is not CV6Progressive Cavity Valve -0.016cc PC-V16 fluid pressure sensors prevent damage or bothlow fluids &highviscosity See page73&74. See required foroperation. separately. Sold Mixer manifoldandconnecting cable Description VALVES 72 1 ml FKM Viton® AL6061 SUS316 1 - 100 psi UHMW-PE Mixer B, C, B, Mixer PC-V1000 1 - 120rpm 120 ml/min or K Style*** Hard Anodize Hard (FFKM option) FKM Viton® 0.55 ml AL6061 SUS316 1 - 100 psi 66 ml/min UHMW-PE Mixer B, C, B, Mixer 1 - 120rpm PC-V550** or K Style*** Hard Anodize Hard (FFKM option) PC-V100/PC-V1000/PC-V550 FKM 0.1 ml Viton® AL6061 SUS316 PC-V100 1 - 100 psi 12 ml/min UHMW-PE 1 - 120rpm Hard Anodize Hard (FFKM option) [email protected] FKM Viton® AL6061 SUS316 0.016 ml 1 - 100 psi UHMW-PE 1 - 120rpm 0.96 ml/min Hard Anodize Hard (FFKM option) 1,100 g (2.4 lb) 1,600 g (3.5 lb) 1,400 g (3.1 lb) (3.5 lb) 1,600 g 1 - 500,000 cps 1 - 500,000 cps 1 - 500,000 cps 1 - 500,000 cps Mixer B Style***Mixer B or C Style*** Mixer 1/8” BSP / Luer Lock BSP / Luer 1/8” Lock BSP / Luer 1/8” Lock BSP / Luer 1/8” Lock BSP / Luer 1/8” Motor SpeedMotor Max Flow Rate Max Flow Input Material Pressure Item Number PC-V16 Dosing Volume/Rev Fluid Viscosity Viscosity Fluid Range Rotor Material Rotor Fluid Inlet Fluid & Outlet Material Stator Stator Size Material Seal Material O-Ring Material Weight Material Inlet Material Material Outlet Specifications PC-V16 **Designed for use with 10:1 ratio fluids, which require a high flow rate. flow a high require which fluids, **Designed for use with 10:1 ratio manifolds sold separately. ***Mixer VALVES system to thevalve itself. fluid forfeed mounting barrel thesyringe orcartridge and secure mounting ofthePosiPump™ valve aswell as to assistinthesafeA range ofbrackets andsupports Auxillary Equipment Auxillary 73 component material insidethemixingnozzle. preventing potential motor failure dueto oftwo curing the PosiPump™ V-Series valve to monitor thefluidpressure, An optional fluidpressure sensorsystem canbeinstalledon between thePosiPump™ valves andPC200valve controller. Valve cableensures connecting signal thecorrect communication Cable Assemblies Number Number 5601800U 638 Valve Stand 562318U 5601923 Cartridge Support Cartridge 5601923 5601922 5601914 5601921 5601920 5601913 5601912 Item Item Item Syringe Barrel Support Syringe Barrel Support Syringe Barrel Support Fluid Pressure Sensor Cartridge Support Support Cartridge Valve Conn. Cable Valve Conn. Cable Robot Mounting Mounting Robot ecito C1 C10P-50PC-V16 PC-1500 PC-150 PC-18 Description PC-V16 PC-1500 PC-150 PC-18 Description Kit 10 ft (3m) 10ft Kit 30 ft (9.1m) 30 ft 10 ft (3m) 10 ft 30/55 cc 30/55 cc Bracket 6/12 oz PosiPump™ Accessories • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • www.fisnar.com • • • • • • • • • • • • PC-V100 PC-V100 CV5 PC-V1000 PC-V550 PC-V1000 PC-V550 VALVES 74 • MBH / MBQ ME PC-V550 PC-V1000 ••• • ••• ME PC-V100 MBH / MBQ MBHX / MBQX MBHX / MBQX MBHX / MBQX • • [email protected] PosiPump™ Accessories PosiPump™ MBH / MBQ MBHX / MBQX 1:1 / 2:1 1:1 / 2:1 Wide Ratio Wide Wide Ratio Wide Description PC-V16 PC-V100 PC-V550 PC-V1000 Mixer Manifold B Manifold Mixer Mixer Manifold B Manifold Mixer B Manifold Mixer B Manifold Mixer 5601917 5601915 5601916 5601918 5601919 Item 5601919 C Manifold Mixer 5601918 5601917 5601915 5601916 Number Mixer ManifoldMixer PC-V16 PosiPump™ V-Series progressive cavity valves are are cavity valves progressive V-Series PosiPump™ mixing use with a variety of different for designed the mixing of the fully optimize to in order nozzles, specification. fluid based on the application Mixer SeriesMixer Compatibility Mixer Manifolds Mixer A variety of Mixer Manifolds for the PosiPump™ the PosiPump™ for A variety Manifolds of Mixer depending on the fluid mix offered, are V-Series be used. to and mixing nozzle ratio VALVES PosiPump™ progressive valves. cavity ofthe maintaining thedispenseperformance are available for parts ofservice A selection 75 Service Parts Service Number 5601939 5601938 5601936 5601935 5601934 5601937 613 0.5cc Rotor Assembly 5601933 0.05cc Rotor Assembly 5601932 613 0.008cc Rotor Assembly 5601931 5601930 5601929 5601928 5601927 5601926 CleaningKit 5601925 5601924 Item Item Stainless Steel Fluid Fitting Stainless Steel Fluid Fitting 1/8” PTxFemale Luer Lock 0.008 cc Stator Assembly 0.008 cc Stator Assembly 1/8” PTx1/4” O.D. Tube 0.05 cc Assembly 0.05 cc Assembly V-Series Seal Kit V-Series Seal V-Series Seal Kit V-Series Seal 0.5 cc Assembly 0.5 cc Assembly I-Series Seal Kit Seal I-Series Kit Seal I-Series ecito C1 C10P-50PC-V16 PC-1500 PC-150 PC-18 Description 0.05 cc /0.5cc 0.05 cc /0.5cc 0.008 cc 0.008 cc FFKM FFKM FFKM FKM FKM FKM PosiPump™ Accessories • • • • • • • • • • • • • • • • • • • • • • • • www.fisnar.com • • • • • • • • • • • • • PC-V100 • • • • • • • • • CV5 PC-V1000 PC-V550 • • • • • •

VALVES stroke. stem at causingtheactuator afixed toarm, lift applied. This creates in the cantilever a deflection of ceramic disksthat changeshapeasvoltage is The piezo is composed actuator of two stacks Features 77 requirements. for bothapplication process anddispensefluid versatility, inorder for itto configured becorrectly The unique modularvalve design gives complete and dispenseprocess control. to bestabilized, to assistinoptimizingjetability element insidethevalve allows thefluidviscosity The inclusion of an integrated closed loop heater control. processlevels andsuperior ofdispenseaccuracy ceramic technology achieves actuation exceptional dispensing valve. The advanced piezo-electric jet or precise high-speed contact as a non-contact The Pz1200 Piezo Electric Valve canbeconfigured Pz1200 Piezo Jet/Contact Dispense Electric Valve Piezo TechnologyValveOperation • • • • • • ot size assmall1nl/0.2mm •

viscosity Closed loopfluidhea D F C control F Ex D ast cycle times and long service life timesandlongservice ast cycle ixed valve stroke ensures process superior ontinuous cycle ratesontinuous cycle upto 1,200Hz urable ceramic cartridge ballandvalveurable seat ceramic cartridge ceptional dispense accuracy ceptional dispenseaccuracy ter for stabilizingfluid www.fisnar.com fluid droplet ejects fromfluid droplet the ejects valve. resulting fillswithfluid. cavity Astheball reseats, a When theceramic offits ceramic balllifts seat, the Benefits • • • • hen usedasajetvalve, Z-axis movement in •

Item Number Item serviced M fluids C access areas Ideal f maintenance times R speeds increased cycle production is eliminated,between cycles which results in W educed downtime production dueto faster ompatible witharange oflow to highviscosity PZ1200D odular design allows to beeasily wetted parts PZ1200S or useonuneven substrates orhard to required foroperation. separately. Sold Valve &fluidinletfitting seatmodule Piezo Valve - Medium ViscosityMedium Piezo Valve- Piezo Valve - High ViscosityHigh Piezo Valve- Description VALVES 78 M8x1 500 Hz 750 Hz 0.18ms Pz1200D NBR, PEEK 50,000 cps Up to 75 °C Up to Up to 75 bar Up to 320 g (0.7 lb) 1,000 psi max (3.4 x 0.7 x 2”) 86 x 17 x 52 mm (fluid dependant) Approx. 10,000,000 cycles Approx. Stainless Steel 303, Ceramix FFKM, 303, Ceramix Steel Stainless M8x1 0.20ms 1200 Hz 2,000 Hz Pz1200S NBR, PEEK Up to 75 °C Up to Up to 75 bar Up to 320 g (0.7 lb) 1,000 psi max (3.4 x 0.7 x 2”) 1 - 100,000 cps 86 x 17 x 52 mm (fluid dependant) [email protected] Approx. 10,000,000 cycles Approx. >99% (non-varying conditions) >99% (non-varying conditions) Stainless Steel 303, Ceramix FFKM, 303, Ceramix Steel Stainless Material Delivery Pressure Material Item Number Viscosity Range Viscosity Components Wetted Min. Dispensing Time Dispensing Max Continuous Frequency Max Burst Dispensing Frequency Maintenance/Inspection Interval Material Inlet Material Max Temperature Fluid Weight Dispensing Accuracy Input Pressure Max Fluid Dimensions (WxDxH) Pz1200S/Pz1200D Specifications VALVES eliminating fluiddroolpost dispense, whilealsomaintaininga constant nozzles.position duringthechangingofdispense Z-height *For contact dispensing, we recommend thePZ-VS-SN screw nozzle valve in performance seat,dueto dispense itssuperior configuration basedon your specificapplication. Consult withyour localFisnar salesrepresentative for thebest modulesare alsoavailable) cartridge T-Type: Suited for fluids(other valve highviscosity/stringy seat / C-Type: Standard choice for mostlow-medium fluids viscosity chamber designs to optimize fluidjettingperformance. Jet valve seat modulesare available intwo different fluidoutlet requirement andfluidmaterial beingprocessed. are available dependent onthespecificapplicationcartridge) A range ofjetvalve seats dispensemodules(including andcontact Valve Modules Seat 79 A range ofscrew nozzles suitablefor useonPZ-VS-SN valve. Screw Nozzles tmNme ecito Nozzle Size Description Number Item ZV-30 Valve Seat Valve Seat PZ-VS-D300C Valve Seat PZ-VS-D150C PZ-VS-D100C ZV-30 Valve Seat Valve Seat PZ-VS-D300T Valve Seat PZ-VS-D150T PZ-VS-D100T PZ-VS-SN* PZ-VS-LL* Item Number Item PZ-TIP-SN300 PZ-TIP-SN200 PZ-TIP-SN100 PZ-TIP-CAP Valve Seat Valve Seat Pz1200 Accessories Screw Nozzle Protection Cap Screw Nozzle 300µm Screw Nozzle 200µm Screw Nozzle 100µm www.fisnar.com Description 300 µm 150 µm 100 µm 300 µm 150 µm 100 µm 0 mCnatNel ipnigC/1.58mm Contact NeedleDispensing 600 µm 0 mCnatNel ipnigC/1.58mm Contact NeedleDispensing 800 µm Non-Contact (Jetting) Non-Contact (Jetting) Non-Contact (Jetting) Non-Contact Non-Contact (Jetting) Non-Contact (Jetting) Non-Contact (Jetting) Non-Contact Valve Seat Type Cartridge Type/Size Cartridge ValveSeat Type C /1.58mm C /1.58mm C /1.58mm T /1.58mm T /1.58mm T /1.58mm VALVES 80 Description Description Description [email protected] Pz1200 Cleaning Kit Cartridge - 1.58 mm Valve Seat Removal Tool Seat Removal Valve Fluid Inlet Fitting – Luer Lock – Luer Inlet Fitting Fluid O-Ring for Valve Seat (10 Pack) Valve O-Ring for Cartridge Removal/Insertion Tool Snap Ring for Valve Seat (10 Pack) Seat (10 Pack) Valve Snap Ring for Snap Ring Removal/Insertion Tool Tool Snap Ring Removal/Insertion Pz1200 Accessories Pz1200 Grub Screw for Valve Seat (10 Pack) Valve for Grub Screw Fluid Inlet Fitting – 4 mm I.D. Tubing – 4 mm I.D. Inlet Fitting Fluid Screw Nozzle Removal/Insertion Tool Tool Removal/Insertion Nozzle Screw PZ-TOOL-1 PZ-TOOL-2 PZ-TOOL-3 PZ-TOOL-4 PZ-CART-D PZ-SPARE-1 PZ-SPARE-2 PZ-SPARE-3 PZ-INLET-LLH Item Number Item Number PZ-CLEAN-KIT Item Number PZ-INLET-HOSE4H PZ-INLET-SUPPORT Support Barrel Syringe 30/55 cc Bracket Service Parts A selection of service seat parts the valve in maintaining assist to maintenance. module during cleaning and preventative Fluid Inlet Fittings & Accessories Inlet Fittings Fluid fed on whether fluid is being types based different in two Available a fluid via tubing from or remotely a syringe barrel directly from reservoir. A useful cleaning kit a variety utensils of cleaning containing module and fluid inlet seat perfectly cleaning the valve for suited fitting. Service Tools & Cleaning Tools Service assembly/ aid to available are tools hand designed Specifically modules. seat disassembly of valve VALVES 81 560021U Syringe Barrel Stand Syringe/Cartridge Retainer Stands Retainer Syringe/Cartridge 560535-TU Metal Retainer Stand Retainer Metal 2.5, 6,8&12oz 560666 Bottle Stand 560666 Bottle Gravity-Fed 500ml 560670U www.fisnar.com 560549U CR300 Cartridge Retainer Stand Retainer CR570 &101-20R20oz 560534U Retainer Stand Retainer 560535-NU Nylon Retainer Stand Retainer Nylon 2.5, 6,8&12oz VALVES 82 MV-0180 Valve Stand Valve 560536U 562054U 710PT-U* Valve Stand Valve 710PT-U* SV1000SS*, SV2000N*, *Rod included with SV1000SS, valves. SV2000, and 710PT-U PPD-130 Valve Stand Valve 562235U 562044U 562043U DTD50 & DTD50-RB DTD50 [email protected] VDP150 Valve Stand VDP150 Valve Valve Stands Valve VD510, VP300 Valve Stand, VD510, VP300 Valve VMP30H, VMS400, PDV-1000,

790HP-LF Valve Stand Valve

560671U 562166U CV629 Valve CV629Stand Valve

Valve Controllers

Fisnar valve controllers are used to ensure long lasting and reliable control of our complete range of precision dispense valves. They provide a simple and convenient way of accurately controlling and adjusting cycle times. The wide range of available valve controllers offered, allow them to be individually tailored to their specific compatible valve type to ensure efficient and optimal performance.

[email protected] 84 • VALVES

Features 790HP, and VMS400 dispensevalves. For usewith710PT-U, VP300,VMP30H, CV629, VD510, MV-0180, digital display to provide consistent, repeatable control. regulatorperformance withconstant pressure control anda Fisnar pneumatically-actuated valves. This system usesahigh- digitalA multi-purpose controller, recommended for usewith DC200 Precision Valve Controller 85 • • • • • ir inputtolerance canbesetfor consistent •

of +/-0.5% R integration I/O cir many applications M dispense cycles Dispense c premature ofmaterials curing A modified C pressure A egulator of 0.2% and a repeatability sensitivity an belockedto keepprograms from being uto purge to and gluealarm prevent ultiple dispensingmodesfor easyusein cuit for control external androbot ounter for completed tracking standard onDC200controller. fitting style Push-to-connect www.fisnar.com Specifications (WxDxH) Dimensions Air Ouput Air Input Power Supply DCfromOutput ACInput to Power Supply Programs Timer Cycle Rate Standards Weight Item Number Item 560671U Standand790HP-LF Valve soldseparately. DC200 Digital ValveController 100 -240 VAC, 50/60Hz (7.09 x7.683.15”) 600+ cycle/minute 180 x19580mm 24 VDC -0.75Amp 10 memory slots 10 memory 70 -100psimax RoHS compliantRoHS Description CE Approved, 0.008 -9999s 1 kg(2.2lb) 1 -100psi VALVES 86 0.01 - 31s 1 - 100 psi 70 - 100 psi Description 1.9 kg (4.2 lb) (10.4 x 8.25 x 2.75”) 4-Way Valve Controller Valve 4-Way 100 - 240 VAC, 50/60 Hz VAC, 100 - 240 264.2 x 209.6 x 69.9 mm VC1195N Item Number Dispense Time Voltage Input Air Ouput Air Dimensions (WxDxH) Weight Specifications [email protected] 562235U stand and VDP150 Valve sold separately. 562235U stand and VDP150 Valve

anual and timer modes ctuated by foot pedal or remotely from a robot from pedal or remotely foot ctuated by an simultaneously control up to two valves two up to an simultaneously control ast response internal pneumatic solenoid pneumatic internal ast response

M C F A T

• • • • • 31seconds iming interval 0.01to from Features For use with 790HP, VDP150, VMS400, VMP30H, VP300, and MV-0180 dispense valves. VP300, and MV-0180 VMP30H, VMS400, VDP150, use with 790HP, For A 4-way valve controller that can be used to control one or two valves simultaneously. The high flow, high high flow, The simultaneously. valves one or two control can be used to that controller valve A 4-way consistent ensures and drooling prevent to valve dispense the off shuts rapidly solenoid internal speed, in a it remains ensures This the dispense valve. air supply to a constant providing by dispense results, actuation. premature prevent to closed position VC1195N 4-Way Valve Controller Valve 4-Way VC1195N VALVES Features SVC100 Setup independently programmed to achieve acleanandprecise spray pattern. The SVC100 spray valve controller allows thefluiddispensesignal and atomizing airsignal to be operation for ofbasicandadvanced avariety spray applications. A fullyintegrated spray valve controller suitablefor allFisnar spray SVseries valves. Simplesetupand SVC100 Spray Valve Controller 87 • • imed orcontinuous spray •

pedal soldseparately.pedal *562032-D foot Easy in Clean, clog-fr T tegration withrobotic platforms ee cutoff 562054U standandSV1000SSvalve soldseparately. www.fisnar.com Specifications Weight (WxDxH) Dimensions Spray Air Ouput Valve Air Output Air Input Voltage TimeDispense Item Number Item SVC100-220 SVC100-110 SVC100-220: 220 VAC, 50/60Hz SVC100-110: 110 VAC, 50/60Hz 220 VACSpray ValveController 110 VACSpray ValveController Models 232.7 x187.582.6mm (9.16 x7.383.25”) 0.008 -99.99s 2.72 kg(6lb) Description 70 -100psi 70 -100psi 1 -60psi VALVES 88 1 - 60 psi 0.01 - 99.99s Description 1.65 kg (3.6 lb) 230 x 210 x 70 mm (9.05 x 8.26 x 2.76”) Auger Valve Controller Valve Auger 100 - 240 VAC, 50/60 Hz VAC, 100 - 240 RVC900N Item Number Time Range Time Voltage Output Pressure Dimensions (WxDxH) Weight Specifications [email protected] 562235U stand and PDV-100 valve sold separately. valve 562235U stand and PDV-100 o 8 stored programs o 8 stored

djustable forward and reverse speed and time and reverse djustable forward uto or manual control uto onstant motor speed motor onstant

A A C Simple t Up t

• • • • o program • Features Due to the constant motor speed output, any change in material viscosity not impact does change in material the dispense any speed output, motor the constant Due to and pressure regulator a via adjusted to the barrel, pressure supplies material controller The rate. flow the end of the at suck-back of controlled can set the amount control timer and speed A reverse gauge. dispense cycle. The RVC900N controls the PDV-1000 series of auger valves. The controller delivers accurate and repeatable and repeatable accurate delivers controller The series of auger valves. the PDV-1000 RVC900NThe controls or manually operated. whether automated application, any for dots and beads RVC900N Auger Valve Controller Valve RVC900N Auger VALVES PC200 Setup Features PC200 Progressive Cavity Valve Controller pressure gaugeensure easysystem installation. screen. An integral pressure regulator anddigital to beindependently programmed ononesingle The 4” HMIdisplay allows alldispenseparameters one andtwo component dispenseapplications. touch-screen programming andoperation for both (GUI)The provides Graphic User Interface simple valves. all Fisnar and PCI-Series V-series progressive cavity An advanced valve controller suitablefor usewith 89 • • • • • • • • anual andtimeddispensemodes •

R A Cleaning r U C A Oper Dig M emote program function select ontrollable suck-back delay dwell time uto-purge (anti-gel function) (anti-gel uto-purge djustable forward &reverse speed ser friendly touch-screen (GUI)ser friendly interface ital pressure outputdisplay ator lockout outine for valve maintenance www.fisnar.com Specifications Standards Weight (WxDxH) Dimensions Air Output Air Input I/O Voltage Programs Time Range Item Number Item C0 Progressive Cavity Valve Controller PC200 Sold separately.Sold page73. See Connecting cable required foroperation. 7 inputs/outputsRS485 203.2 x279.4114.3mm 100 -240 VAC, 50/60Hz Description 200 memory slots 200 memory RoHS CompliantRoHS 1,700 g(3.75lb) CE Approved, (8 x114.5”) 70 -100psi 0.01 -500s 1 -100psi VALVES 90 0.84 - 999ms 24 V / 11.67 A 24 CE Approved, (8 x 4.7 x 1.3”) 800 g (1.76 lb) RoHS Compliant 10 memory slots 3 inputs / 5 outputs 201 x 119 x 32.5 mm Description 96 - 264 VAC, 47 - 63 Hz VAC, 96 - 264 Power supply & valve connecting cable cable connecting supply & valve Power (4.5 m) included. PZ-CON-1PZ-CON-2 - 1 Channel Controller Valve Piezo PZ-CON-3 - 2 Channel Controller Valve Piezo PZ-CON-4 - 3 Channel Controller Valve Piezo - 4 Channel Controller Valve Piezo Item Number Time Range Time Programs I/O Input AC Supply Power to Output DC Supply Power from Dimensions (WxDxH) Weight Standards Specifications [email protected] ogrammable memories ogrammable ator lockout ator

ser configurable I/O ser configurable ontrol up to 4 valves up to ontrol emote program backup program emote alve purge screen purge alve rogrammable pulse definition profiles rogrammable rigger or continuous operation mode operation rigger or continuous emperature control emperature

R P 10 user pr T Oper V C T U U

• • • • • • • • • • display touchscreen ser friendly 7” Each controller is supplied with three different user different with three is supplied Each controller which is critical adjustable pulse definition profiles, minimize to in order when jetting fluid materials unwanted and seat valve fluid build-up on the on substrate. satellites The built-in memory built-in 10 individual up to The allows time pulse containing be created to programs USB A built in and sequencing times & frequency. be remotely to programs for connection also allows stored. The Pz-CON piezo electric valve controller can electric controller piezo Pz-CON valve The 4 to up control independently to configured be pre-fitted uses module(s) The driver valves. Pz1200 to wave correct the signal to generate an amplifier the within elements piezo the actuate and control dispense control. ensuring precise valve

Features Pz-CON Piezo Electric Valve Controller Valve Electric Piezo Pz-CON

Reservoirs & Pumps

[email protected] 92 RESERVOIRS/PUMPS 93 All reservoirs comeAll reservoirs standard withassociated airline, fluidline, regulator, andfittings. of thecontainer orifthefluid requires anagitator. An “open top” is used if liners are style required to prevent with the the sides material contact from making for forincluding bottom medium to ported liquids and top high viscosity low ported to medium viscosities. tanksare usedto feedReservoirs ofdispensing bulkfluids valves.to a variety A range ofsizes are available Reservoir IJ Series Tanks IJ2601N-SS-SP IJ-83B-500 IJ-0200R IJ2601N-SS IJ-83B-500-SP IJ-0300 www.fisnar.com IJ-0100 IJ-83B-500-BK IJ-0300R IJ-0100R IJ-83Z-211 IJ-83G-510-SP IJ-0200 RESERVOIRS/PUMPS 94 O.D. Hose Material Material Dimension WxH (inches) Overall Outer Overall 80 18 1/2 x 30 5/16 1/4” 80 13 3/8 x 20 1/2 1/4” 80 13 3/8 x 20 1/2 1/4” 80 13 3/8 x 20 1/2 1/4” Max (psi) Pressure Pressure Steel Steel Steel Steel Tank Tank Regulator Description Material Galvanized Galvanized Galvanized Galvanized Galvanized Galvanized Galvanized Galvanized Material shut off valve assembly valve Material shut off Metal Replaceable liner for IJ-83G-510-SP liner for Replaceable Pressure Guage 0 - 100 psi - 1/8” NPT Side Mount Guage 0 - 100 psi - 1/8” Pressure SS RubberSS SS Metal SS 125 80 22 1/2 9 x x 23 5/8 13 3/8 1/4” 1/4” SS Rubber SS 125 9 x 11 5/8 1/4” SS Rubber SS 125 9 x 9 1/4 1/4” SS Metal SS 50 6 1/2 x 8 1/4” PE Metal PE Metal PE Metal PE Metal SS 50 8 6 1/2 x 1/4” Available Accessories Available Steel [email protected] O-ring 1, 2, and 5 gallon bottle-style EPDM for reservoirs Galvanized Top Top Top Top Top Top PTFE encapsulated Viton® O-ring 1, 2, and 5 gallon bottle-style for Viton® reservoirs PTFE encapsulated Replaceable liner for IJ-83B-500, IJ-83Z-211, IJ-83B-500-SP, and IJ-83B-500-BK IJ-83B-500-SP, IJ-83B-500, IJ-83Z-211, liner for Replaceable Top Top Top Top Top Top Top Top Style Ported Riser Base Top w/ Top Agitator (Gallon) Capacity Capacity 560779 560944 560554 560944T 560934B IJ-83B-RL PTL-408-K20 Item Number

Item IJ-0300 5 Bottle Bottom N/A Metal SS 125 9 x 24 15/16 3/8” IJ-0200 2 Bottle Bottom N/A Metal SS 125 9 x 14 1/4 3/8” IJ-0100 1 Bottle Bottom N/A Metal SS 125 9 x 12 9/16 3/8”

IJ-0300R 5 Bottle IJ-0200R 2 Bottle IJ-0100R 1 Bottle Number IJ-83Z-211 2.8 IJ-83B-500 2.8 IJ2601N-SS 0.5 Bottle IJ-83B-500-SP 2.8 IJ-83B-500-BK 2.8 IJ-83G-510-SP 5

IJ2601N-SS-SP 0.5 Bottle IJ Series Reservoir Tanks IJ Series Reservoir RESERVOIRS/PUMPS 95 evaporation. preventing fluid contamination and high offeringstainless steel construction The oftankscontain FTseries a agitation. intermittent orconstant fluidstirring/ air motor forwith a powerful pneumatic agitation system installed Each modelisavailable witha applications. fluid pressure for many dispensing tanks maintainreservoir a steady in mind, Fisnar stainlesssteel fluid Designed with safety and quality Top-Ported TanksSeries Reservoir FT T0A 10 FT10-AG Number T-G5 FT5-AG T-G2 FT2-AG T-G1 FT1-AG T010 FT10 Item T 5 FT5 T 2 FT2 T 1 FT1 chemical resistance while Capacity (Liters) Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Standard Standard Standard Standard Agitated Agitated Agitated Agitated tl Riser Style ES 0 0 5 3 8 1/4 237x482 200x359 100 SS PE ES 0 5 0 0 9 1/4 202x390 152x300 100 SS PE ES 0 0 7 8 6 1/4 182x360 100x270 100 SS PE ES 0 0 3 8 2 1/4 182x225 100x135 100 SS PE SS 0 0 5 3 0 1/4 237x605 200x359 100 SS SS SS 0 5 0 0 9 1/4 202x495 152x300 100 SS SS SS 0 0 7 8 6 1/4 182x465 100x270 100 SS SS SS 0 0 3 8 3 1/4 182x330 100x135 100 SS SS www.fisnar.com Material Tank Pressure (psi) Max WorkingMax Overall Inner & Dimension & Dimension WxH (mm) Overall Outer Dimension Dimension WxH (mm) Hose O.D. Material (inches)

RESERVOIRS/PUMPS 97 Features to avalvecan beinterfaced ordispensingpen. up through adisposabletubeto aconnector, which Regulated airpressure forces theliquidinbottle 1 lb(0.45kg)plasticcontainers. low from liquidsdirectly viscosity bottlesandupto pressureA see-through chamberfor dispensing Pressure Chamber Clear ViewPP300-GL-A • • • ll wetted disposableparts •

Suitable f when usingcyanoacrylates Glass chamberpr M A aterial visualmonitoring or mostlow-viscosity fluids events bloomingorcrazing www.fisnar.com Specifications (WxLxH) Dimensions External PressureMax Interior Height Interior ID Item Number Item Item Number Item Bottle and pen soldseparately. andpen Bottle PP300-GL-A 5606034 660Luer Lock Fitting 0.10” I.D. Luer Lock Fitting 0.07” I.D. 560620 560610 560609 560608 560607 Accessories 152.4 x279.4mm Dispense Tube 0.10” I.D. Dispense Tube 0.07” I.D. 220.98mm(8.70”) 91.44 mm(3.60”) Pressure Chamber Description (6 x611”) Description Safety Clip Dip Tube 30 psi RESERVOIRS/PUMPS 98 FPT Air Line Air Dip Tube 1/4” Tube 1/4” Description Description Luer Lock Tube Fitting Tube Lock Luer For use with 710PT-U & 700PTPCW use with 710PT-U For Male LL Adapter 1/4” NPT x 1/8” NPT x 1/8” 1/4” Male LL Adapter Accessories PP Compression Fitting 1/4” NPT x 1/4” Fitting PP Compression 560620 560657Tube NPT x 1/4” 1/4” Fitting Female 562320 562321562322 NPT x 1/8” Male LL Adapter 561851 5801450 Adapter Lock Male Luer PP450-GL Chamber Pressure 4.5 Liter 1/4” Tube Fitting Tube 1/4” Item Number Item Number 561415-IJ-10FT O.D. x 1/4” I.D. 0.170” Tubing P.E. 580047A-10-24 Long x 24” I.D. Line 0.10” Fluid Can also be used with 710PT-U & also be710PT-U used with Can & pen. pinch tube700PTPCW valve [email protected] 39 °F (4 °C) 150 mm (6”) 1.2 gal / 4.5 l 60 psi (4 bar) 100 °F (38 °C) 3.5 kg (11 lb) 254 mm (10”) 406 mm (16”) 165 x 165 mm (6.5 x 6.5”) events blooming or crazing blooming or crazing events ating pressure up to 60 psi up to pressure ating

aterial visual monitoring aterial ll wetted disposable partsll wetted ompatible with medium viscosity fluids when ompatible omes standard with a luer lock fitting for use for fitting lock luer a with standard omes when using cyanoacrylates Oper Glass chamber pr using supplied 1/4” fluid line kit using supplied 1/4” A M C C fluids with low-viscosity C

Capacity Maximum Operating Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature Diameter Internal Height Internal External Width External Height Weight • • • • • • • slidevalve release quick pressure onvenient Regulated air pressure forces the liquid in the bottle the in liquid the forces pressure air Regulated which connector, a tube to a disposable up through or dispensing pen. can be interfaced a valve to A see-through pressure chamber for dispensing for chamber see-throughA pressure medium viscosity liquids directly from to low plastic containers. 1 lb (0.45 kg) bottles and up to Features Specifications

Pressure Chamber Pressure PP450-GL View Clear RESERVOIRS/PUMPS 99 Features DA35 Autocan System Extruder Specifications fitted. OptionalFKMwipersealsoldseparately. waste. Suppliedasstandard withaNBRwiperseal drops to wipethesidesofcanclean,limiting plate that sealsandfollows thematerial asthelevel pumpbodyisfittedThe withafollower extruder which require aconstant supplyofair-free material. automatic controlled dispensing applications, can. This system is suitable for automatic and semi- materials underpressure from directly apre-filled The DA35 mediumto highviscosity extrudes • • • • • revents airbubblesandmaterial voids • Weight Wetted Parts SizeOutlet Air Inlet/Fluid PumpMax Speed Volume/Stroke Ratio FluidRange Viscosity Pressure Output Maximum Air Pressure Input for Sensing Power Input Height Adjustment Size

I L Easy hookupf Simple loadmechanismpr A P ntegrated low level andwarning light alarm ow noise electric extruder model extruder ow noiseelectric ir ram assistto helpdrive material or automatic systems PTFE, Viton®, andPEEKseals 550 mmmin-720max (21.65” min-28.35” max) 110 -220 VAC, 50-60Hz 30,000 -300,000cps ovides easycleaning 12.73 kg(28lb) 215 x440mm (8.46 x17.32”) 1/4” NPT(f) 30 -100psi 850 psi 60rpm 5 cc 5 8.5 www.fisnar.com Item Number Item 1300060-3KG-FKM 1300060-1KG-FKM 1300060-3KG-NBR 1300060-1KG-NBR A53GU Autocan Pump 220 VAC Autocan Pump 220 VAC DA35-3KG-UK DA35-1KG-UK A53GU Autocan Pump 110 VAC Autocan Pump 110 VAC DA35-3KG-US DA35-1KG-US A53GE Autocan Pump 220 VAC Autocan Pump 220 VAC DA35-3KG-EU DA35-1KG-EU Item Number Item Controller, hose, valve, andhandlesoldseparately. 570AABFluid Regulator SS3,000psi 651780-A3A-B DA35-3KG DA35-1KG EP1415K Accessories Models Fluid with Kit Regulator Install Follower Wiper FKM Seal Follower Wiper FKM Seal Follower Wiper NBR Seal Follower Wiper NBR Seal Follower Plate 3kg Follower Plate 1kg Description Gauge FittingsGauge (168 mmO.D.) (117 mmO.D.) (168 mmO.D.) (117 mmO.D.) Description RESERVOIRS/PUMPS 100 50 °C 30 - 100 psi 1/4” NPT (f)1/4” 996 psi max 0.01 cc/shot 24 kg (52.8 lb) 10,000 - 600,000 cps 500 x 400 x 1,200 mm 19.68 x 15.74 x 47.24”) Steel, PTFE, Viton®, PEEK Viton®, PTFE, Steel, 304 and 17-4 pH Stainless 304 and 17-4 pH Stainless Description (229.72” min x 47.24” max) min x 47.24” (229.72” 755 mm min-1200 mm max 220 VAC, 50 - 60 Hz, 20 watts VAC, 220 Pump ElectricPump 20 kg (5 Gallon 15:1 220 VAC) (5 Gallon 15:1 220 EP1305N Item Number Air Inlet/Fluid Air Outlet Size Parts Wetted Weight Size Height Adjustment Sensing Input for Power Input Pressure Air Maximum Output Pressure Viscosity Range Fluid Minimum Volume/Stroke Max Operating Pressure Specifications [email protected] or easy cleaning Description (5 gallon pail) Low Level Sensor Level Low Gauge and Fittings Follower Plate for 20 kg for Plate Follower Fluid Regulator Install Regulator Kit with Fluid Accessories trical extruder motor Item

ipe-clean action EP1415K ir ram assist to help drive material and and material help drive assist to ir ram Number EP1305WP EP1300LPS

Simple load mechanism f Elec W A pressure adjustable air ram M 651780-A3A-B SS 3,000 psi Regulator Fluid

• • • • • airfree delivered aterial Features The EP1305 utilizes a low-pulse pump design suitable design pump low-pulse a utilizes EP1305 The production dispensing applications, automatic for These applications regulator. when used with a fluid Air material. of air-free supply a constant require handling caused by voids, bubbles and material prevented. are high viscosity fluids, or decanting plate. with 20 kg follower Supplied standard follower extruder with a follower The pump body is fitted as the level the material seals and follows that plate of the pail clean, limiting wipe the sides to drops hoses reinforced by fluid is pressure-fed The waste. controller. a valve is actuated by that a valve to The EP1305N is designed for dispensing 5 gallon pails dispensing for EP1305N is designed The silicones for Ideal viscosity high fluid. to medium of a 15:1 and provide at rated are Systems and grease. pressure. material psi regulated maximum of 996 EP1305N Pail Extruder System Pail EP1305N RESERVOIRS/PUMPS 101 Features jacketed cylinder. pressure. iscontained withametal- The cartridge providing amaximumof 995psiregulated material for controlled dispensingviaahighpressure valve, The EP1310C isdesigned to easilytransfer material for controlled dispensingapplications. valve to orconnected anautomatic robot production pulse pumpdesign canbeusedwithadispense fluids, thislow- Suitablefor silicone-type cartridges. fluid transfer from 1/10th gallon (310 ml) plastic medium-ratioA powerful, system for controlled Pump System EP1310C SingleCartridge • • • • • aterial delivered airfree •

easy automatic systems hookup Simple loadmechanismf Elec pressure P H W M ressure piston assistwithadjustablepiston igh-pressure regulation ipe-clean action action ipe-clean trical extruder motor extruder trical or easycleaningand www.fisnar.com Specifications Weight Wetted Parts SizeOutlet Air Inlet/Fluid Size Cartridge Air Consumption Stroke Volume/Minimum Ratio FluidRange Viscosity Pressure Output Maximum Air Pressure Input Sensing Pump for Input Size Item Number Item EP1310C Pump Electric 1/10thGallon Pump Electric EP1310C 304 and17-4phStainless Steel, 220 VAC, 20watts 50-60Hz, PTFE, Viton®, andPEEKseals Description 10,000 -600,000cps 225 x170649mm 8.86 x6.6925.55”) 300 -310ml 15 kg(33lb) 0.01 cc/shot 1/4” NPT(f) 30 -100psi 80 I/min 995 psi 15 RESERVOIRS/PUMPS 102 995 psi 80 I/min 30 - 100 psi 1/4” NPT (f)1/4” 0.01 cc/shot 18 kg (40 lb) 272 x 288 x 649 mm 10,000 - 600,000 cps Description 1/10th Gallon (10.71 x 11.34 x 25.55”) PTFE, Viton®, and PEEK seals Viton®, PTFE, 220 VAC, 50 - 60 Hz, 20 watts VAC, 220 304 and 17-4 ph Stainless Steel, Steel, 304 and 17-4 ph Stainless Dual Cartridge System Pump EP1320C Item Number Air Consumption Air Inlet/Fluid Air Outlet Size Parts Wetted Weight Size Input for Pump Sensing Input Pressure Air Maximum Output Pressure Viscosity Range Fluid Minimum Volume/ Stroke Specifications

[email protected] or automatic systems or automatic trical extruder motor

ipe-clean action igh-pressure regulation and adjustable and adjustable regulation igh-pressure

pressure piston assist piston pressure Elec Easy hook up f H M W

• • • • air-free delivered aterial • Features Rated at 15:1 the system provides a maximum of 995 a maximum of provides 15:1 the system Rated at A + B cartridgeThe pressure. material psi regulated either from switches automatically management A when the cartridge B or B to A to is exhausted. cylinders.Cartridges in metal-jacketed contained are to easily transfer material for controlled dispensing controlled for material easily transfer to valve. via a high pressure A powerful, medium-ratio system for controlled controlled for system A powerful, medium-ratio 1/10th gallon (310 ml) plastic from fluid transfer The cartridges.silicone-type for Suitable fluids. cartridge tandem a dual (A+B) integrates system A management. continuous-flow for arrangement of control automatic allows pump design low-pulse is designed EP1320C The dispensing applications. Pump System Pump EP1320C DualEP1320C Cartridge RESERVOIRS/PUMPS 103 A selections ofthemostpopularfittings, hoses,A selections manifolds, regulators, Fittings, Hoses, &Accessories and mufflers to fit yourindividualapplication needs. www.fisnar.com RESERVOIRS/PUMPS 104 Clear Clear Clear Black Black Black Black Black Black Black Black White White White White White White White White White Natural Natural Natural Material/Color Description Female Luer Lock Coupling Lock Luer Female Male Luer Lock x 0.170” Barb x 0.170” Lock Male Luer Female Luer Lock x 0.170” Barb x 0.170” Lock Luer Female Male Luer Lock Fitting x 1/4” Barb x 1/4” Fitting Lock Male Luer Female Luer Lock Fitting x 1/4” NPT x 1/4” Fitting Lock Luer Female Female Luer Lock Fitting x 1/4” Barb x 1/4” Fitting Lock Luer Female Elbow 1/4” O.D. Tube x 1/8” NPT Male x 1/8” Tube O.D. 1/4” Elbow Male NPT x 1/4” Tube O.D. 1/4” Elbow Elbow 3/8” O.D. Tube x 1/4” NPT Male 1/4” x Tube O.D. 3/8” Elbow Elbow 1/4” O.D. Tube x 1/8” NPT Male 1/8” x Tube O.D. 1/4” Elbow NPT Male 1/4” x Tube O.D. 1/4” Elbow Straight 1/4” O.D. Tube x 1/8” NPT Male x 1/8” Tube O.D. 1/4” Straight Straight 1/4” O.D. Tube x 1/4” NPT Male x 1/4” Tube O.D. 1/4” Straight Straight 3/8” O.D. Tube x 1/8” NPT Male x 1/8” Tube O.D. 3/8” Straight NPT Male x 1/4” Tube O.D. 3/8” Straight Straight 3/8” O.D. Tube x 1/4” NPT Male x 1/4” Tube O.D. 3/8” Straight Straight 3/8” O.D. Tube x 1/8” NPT Male x 1/8” Tube O.D. 3/8” Straight Straight 1/4” O.D. Tube x 1/8” NPT Male x 1/8” Tube O.D. 1/4” Straight NPT Male x 1/4” Tube O.D. 1/4” Straight Elbow Female Luer Lock x 1/8” NPT Male x 1/8” Lock Luer Female Elbow Elbow Female Luer Lock x 1/8” NPT Male x 1/8” Lock Luer Female Elbow [email protected] Standard Plastic Fittings Plastic Standard 914 913 7610 560715 560714 560748 560656 561085 561086 560657560726 NPT Female x 1/4” Tube O.D. 1/4” Coupling Straight 561821 NPT Female x 1/4” Tube O.D. 3/8” Coupling Straight 7610BP 5801451 5801452 5801453 5801454 913-BLACK Item Number 560714-BLACK 560748-BLACK 561821-BLACK 560715-BLACK 560656-BLACK RESERVOIRS/PUMPS 105 Item Number Item A-10001-OT 561402N 560906N 560950N 561427H 5801449 5801450 5606038 5601064 5606035 2004BA 561129 562317 561105 560710 561401 560546 560914 561861 to 1/4”-28UNFMale Female Luer Lock Connector 560734 560733 560936 Standard Plastic Fittings Street Elbow 1/4” NPTFemale x1/4” NPTMale Reducer 1/4”-28UNFFemale x1/4” NPTMale Cartridge Adapter 1/4”Cartridge NPTx13/16”-14 UNC www.fisnar.com Cartridge Adapter 1/4”Cartridge NPTx5/8”-11 UNC Male Quick Connect for Connect Quick Male 0.093” I.D. Tubing Reducer 1/8” NPTFemale x1/4” NPTMale aeLe okx14 P aeAatrBlack Polypropylene White Polypropylene LuerMale Lock x1/4” Adapter NPT Male LuerMale Lock x1/4” Adapter NPTMale Male Quick Connect for Connect Quick Male 1/8” I.D. Tubing Reducer 1/4”-28UNFx1/8” NPTMale Male LuerMale Lock x1/4”-28NPT50UNF Male LuerMale Lock x10-32” NPT50UNF Cartridge Adapter 1/4”Cartridge NPTFemale Male LuerMale Lock Adapter xM8Male T Fitting 5/32” I.D. x1/4” O.D. Tube Barbed FittingBarbed x1/8” NPTFemale Barb FittingBarb 5/32” I.D. x1/4” O.D. Barbed ElbowBarbed x1/8” NPTMale Barb FittingBarb 1/8” x1/4” O.D. Female to Connect Quick Female to Connect Quick 1/4” Stem x5/32” Barb Luer Lock Cap Male Description White Polypropylene White Polyethylene Material/Color Nylon/Natural Nylon/Natural Nylon/White White Acetal Black Acetal P.E./Clear Green White Black Black Black Black Clear Clear Clear Clear Clear Clear RESERVOIRS/PUMPS 106 Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Metal Metal Stainless Steel Stainless Stainless Steel Stainless Stainless Steel Stainless Material/Color Description Nipple 1/4” NPT Male NPT Nipple 1/4” NPT Male Nipple 1/8” 1/4” NPT Female Coupling NPT Female 1/4” Hex Head Plug 1/4” NPT Male 1/4” Head Plug Hex NPT Male 3/8” Head Plug Hex Elbow 1/4” NPT Male x 1/4” NPT Male NPT Male x 1/4” 1/4” Elbow NPT Male NPT Male x 1/4” 1/4” Elbow Elbow 1/4” NPT Male x 1/4” NPT Female Male NPT x 1/4” 1/4” Elbow Elbow 1/4” NPT Male x 1/8” NPT Female NPT Male x 1/8” 1/4” Elbow Male Luer Lock x 1/4” NPT Male Adapter x 1/4” Lock Male Luer Male Luer Lock x 1/8” NPT Male Adapter x 1/8” Lock Male Luer Street T 1/4” NPT Male x 1/4” NPT Female Male NPT x 1/4” T 1/4” Street Adapter 1/8” NPT Male x 1/4” NPT Female NPT Male x 1/4” 1/8” Adapter NPT Female NPT Male x 1/4” 1/8” Adapter Bushing 1/4” NPT Male x 1/8” NPT Female NPT Male x 1/8” Bushing 1/4” NPT Female NPT Male x 1/4” Bushing 3/8” NPT Female NPT Male x 1/4” Bushing 1/2” NPT Female NPT Male x 1/4” Bushing 3/4” Cartridge Adapter 1/4” NPT x 5/8”-11 UNC Cartridge 1/4” Adapter Barbed Elbow 1/8” I.D. Tube x 1/8” NPT Male x 1/8” Tube I.D. 1/8” Barbed Elbow NPT Male x 1/4” Tube I.D. 1/8” Barbed Elbow Barbed Elbow 1/8” I.D. Tube x 1/8” NPT Female x 1/8” Tube I.D. 1/8” Barbed Elbow [email protected] Reducing Nipple 1/4” NPT Male to 1/8” NPT Male NPT 1/8” NPT Male to Reducing Nipple 1/4” Straight Barbed Fitting 1/8” I.D. Tube x 1/4” NPT Male x 1/4” Tube I.D. 1/8” Barbed Fitting Straight NPT Male x 1/4” Tube I.D. 1/4” Barbed Fitting Straight Brass Brass Standard Metal Fittings Standard 560953 560716 560718 560614 560719 560924 560717 560759 560727 560634 560747 560945 560757 560758 560701 NPT Female x 1/8” Tube I.D. 1/8” Barbed Fitting Straight Brass 560704 560737 560728 560732 560713 560724 560729 5801420 560724SS 561129-SS 5607277SS Item Number RESERVOIRS/PUMPS 107 639NNI Pressure 0-100psi1/8” Gauge NPTPanel Mount 561399-NON IJ Item Number Item 51495K173 560616-50 7972Ps onc i itn 14 tmx53”tb .. Black Push Air Connect Fitting (1/4” stem x5/32” tubeO.D.) 5779K712 676 Straight 1/4” O.D. Push Connector x1/4” NPTMale 560746A 694 Pressure 0-100psi1/8” Gauge NPTSideMount 560934B 613 Pressure 0-15psi1/8” Gauge NPT Panel Mount 561871B 561193B 5601062 561694 560611 560779 560703 580057 560785 560784 560795 561964 560725 560762 560763 560949 Specialty FittingsSpecialty Straight 1/4” O.D. Push Connector x1/8” NPTMale Swivel Elbow 1/4” O.D. Push Connector xM5Male Swivel Elbow 1/4” O.D. Push Connector x1/8” NPT Vacuum 0-30psi1/8” Gauge NPTPanel Mount Pressure 0-30psi1/8” Gauge NPT Top Mount 1/4” Push x1/4” Socket Connect NPTFemale Pressure Relief Valve -1/4” 125psiMax NPT www.fisnar.com Pressure Relief Valve -1/8” 50psiMax NPT Female x1/4” Connect Quick NPTMale 1/4” O.D. Push to Air Connect Plug Straight 1/4” O.D. Compression Pressure Regulator 0-100psi 1/4” Plug x1/4” NPTFemale 1/4” Plug x1/4” NPTMale Fitting x1/4” NPTMale Hose Clamp1/4” Tube T for 1/4” O.D. Tube Slide Air ValveSlide Description Male Material/Color Metal Metal Metal Metal Metal Metal Metal Metal Black Black Black Black Black Black Black Black Black Brass Brass Brass Brass RESERVOIRS/PUMPS 108 supplying [email protected] Description Description Description Description Pointed Tip Tip Cap Pointed Clean Room Muffler for Clean Room Muffler Threaded Square Plug PE Plug Square Threaded DC Controllers (10-32 UNF) DC Controllers

EA4P

560024 O.D.) Muffler (1/4” Clean Room Filter 560057Tube) (1/4” Manifold Air 4 Port 8001039 5801449 NPT Male Adapter x 1/4” Lock Male Luer 560542LL Lock) (Luer Manifold Fluid 4 Port

560024DC 913-BLACK NPT Male 1/4” x Tube O.D. 3/8” Straight 51495K173 Plug Connect Air to Push O.D. 1/4” 560542-3/8Tube) (3/8” Manifold Fluid 4 Port 560542-1/4Tube) (1/4” Manifold Fluid 4 Port

560656-BLACK NPT Male x 1/4” Tube O.D. 1/4” Straight Item Number Item Number Item Number Item Number

Mufflers filter air output up to 0.5 microns and provide muffling of and to 0.5 microns air output up Mufflers filter required. noise is operating reduced air where exhaust Mufflers for Benchtop Controllers for Benchtop Mufflers

Fluid manifolds provide the capability the of provide manifolds Fluid Tube Fluid Manifold Fluid Tube Air manifolds provide the capacity connectingof to up provide manifolds Air one dispenser. to valves four valves. four up to one reservoir to from material tubing. or 3/8” 1/4” Suitable for Air Manifold Air Luer Lock Fluid Manifold Fluid Lock Luer the capability of supplying provide manifolds Fluid valves. four up to one reservoir to from material feed tubing. fluid O.D. or 3/8” use with 1/4” Suitable for RESERVOIRS/PUMPS syringes whenconstantsyringes pressure isrequired. Pressure regulator and reservoirs for cartridge Air Pressure Regulator adhesives. suggested whendispensingcyanoacrylate moisture and oils up to 5 microns. Generally provides filtration extra for capturing remaining Air Filter Regulator assemblywithcoalescer Air Filter Regulator withCoalescer with Fisnar controllers andreservoirs. sources up to 5 microns. Recommeneded for use frommoisture compressed andparticulates air Air Filter Regulator assemblyisdesigned to remove Air Filter Regulator 109 Item Number Item Item Number Item Number Item 560779SK 560567C 560567 Air Regulator Assembly for Syringe 5 Micron Air5 Micron Filter Regulator Assembly withCoalescer 5 Micron Air5 Micron Filter Barrel Adapter Description Description Description www.fisnar.com

RESERVOIRS/PUMPS 110 PVC/Clear PVC/Clear PTFE/Natural Material/Color Polyurethane/Blue Polyethylene/Black Polyethylene/Black Polyurethane/Clear Polyurethane/White Polyethylene/Natural Polyethylene/Natural Descriptions 3/8” O.D. x 1/4” I.D. Tubing I.D. x 1/4” O.D. 3/8” 3/8” O.D. x 1/4” I.D. Tubing I.D. x 1/4” O.D. 3/8” 1/4” O.D. x 1/8” I.D. Tubing I.D. x 1/8” O.D. 1/4” Tubing I.D. x 1/8” O.D. 1/4” 3/8” O.D. x 3/16” I.D. Tubing I.D. x 3/16” O.D. 3/8” 1/4” O.D. x 0.170” I.D. Tubing I.D. x 0.170” O.D. 1/4” 1/4” O.D. x 0.145” I.D. Tubing I.D. x 0.145” O.D. 1/4” 1/4” O.D. x 0.170” I.D. Tubing I.D. x 0.170” O.D. 1/4” 6 mm O.D. x 4 mm I.D. Tubing x 4 mm I.D. 6 mm O.D. Polyethylene/Natural 0.250” O.D. x 0.188” I.D. Tubing I.D. x 0.188” O.D. 0.250” Tubing I.D. x 0.093” O.D. 0.152” Tubing [email protected] 560743-10FT 560744-10FT 562066-10FT 561416-10FT 560705-10FT 560722-10FT 560750-10FT 561400-10FT Item Number 5601060-10FT 561415-IJ-10FT 5606030-100FT Fluid tubing is available in a range of sizes, colors, and materials for a variety of dispensing requirements. varietya requirements. dispensing of for materials and colors, sizes, of range a in available is tubing Fluid also available. sizes Bulk roll

Robotics

[email protected] 112 ROBOTICS delay, degree ofrotation, andwait before period cycling. The system isfully programmable to control dispense oronanoutsidewall. part wall withinacylindrical vertical The Z-axis tilt is easily adjusted to dispense either on a barrels, orvalves mounted cartridges, ontheZ-axis. circle diameter, and dispensing time. Dispense from lubricants, theF1300N isfullyadjustableinrotation speed, Used for dispensingadhesives, silicones, greases, and dispensing at afixed angle. to access. The tiltingZ-axis allows for controlled rotary dispensing acircular pattern onareas that are difficult tableprovidesThe F1300N rotary anefficient methodof TableRotary F1300N 113 Features • • • • ouch screen LCD display for easy set up and •

I/O in P 9 userpr F operation T ully programmable for accurate dispensing assword-protected operator mode lock-out terface ogrammable memories www.fisnar.com Specifications Weight Working Area (Diameter) Tool Load Work Load (WxDxH) Dimensions Air Output Air Input Rotation Speed Vertical Travel Cycle Initiation Number Item Number F1300N Item Description 11 kg(24.3lb) 300 mm(12”) 10 kg(22lb) 2 kg(4.4lb) (13.8 x1922.6”) 350 x482575mm 1 -100psi(57bar) 70 -100psi(57bar) 0 -60rpm lengths optional 50 mm(2”)other orAutomaticManual F1300N Rotary TableRotary ROBOTICS 114 Description F4200N.2 200 x 200 x 50 mm 500 / 200 mm / secs 3 kg 2 kg +/- 0.02 mm / axis 0.001 mm / axis PTP & CP motors Micro stepping 1 - 100 programs 50,000 points/program 8 inputs / 8 outputs USB / RS232 AC Auto-switching 320 watts VAC, 100 - 240 324 x 499 x 480 mm (12.75 x 19.7 x 18.9”) 17 kg (37.5 lb) F4200N.2 Robot Compact Benchtop Item Number Item Number (X/Y/Z) Area Working Maximum Speed (X&Y/Z) Load Work Z-Axis Load Tool Repeatability Resolution Motion Control System Drive MemoryData I/O Signals External Interface Supply Power Dimensions (WxDxH) Weight Specifications [email protected] ogramming t for data transfer and back up transfer data t for ootprint for bench space reduction bench space for ootprint

tep and repeat functionality and repeat tep

USB por Optional PC pr Small f S R

• • • • • epeatability 0.02mm *Required to conform to European CE safety European to regulations conform to *Required (Machinery 2006/42/EC). Directive Features The F4200N.2 robot can be supplied individually can be supplied individually F4200N.2 robot The by system machine stand-alone complete a as or enclosure.* a safety into integrating The optional automatic tip-alignment and optional automatic The machine detect furtherheight device improve productivityperformance increased and process by control. Programming the F4200N.2 robot is simple with is simple the F4200N.2 robot Programming and user-friendly pendant the included teach a sophisticated allows This proprietary software. and operational be created to dispensing operation in minutes. The F4200N.2 is a compact, ergonomic, and a compact, F4200N.2 is ergonomic, The support to robot, benchtop priced economically most light-duty entry dispensing applications level a high performance standard. which require Benchtop Robot Benchtop F4200N.2 CompactF4200N.2 ROBOTICS Features integrating into asafety enclosure.* or asacomplete stand-alonemachinesystem by The F4000ADVANCE canbesuppliedindividually positions. patterns orwhenthere isahighnumberofdispense reduces programming timefor complex dispense data. CAD the imported This feature dramatically and have created dispenselinesordotsquickly from allows for DXF into files the software to be imported windowsThe programming proprietary software pendant (included). up and operational in just minutes using the teach (dots, lines, circles, arcs, andfills)that canbeset enables the creation of complex dispensing routines robotand isuserfriendly software proprietary fluid dispensingprocesses, theF4000 ADVANCE and repeatability isachieved. Specificallybuilt for orvalve system,cartridge, ahighlevel ofaccuracy and positioning. When configured withasyringe, are designed to ensure precise fluidplacement Fisnar F4000 ADVANCE 3-axis benchtop 3-Axis Robot F4000 ADVANCE Series 115 (Machinery Directive 2006/42/EC). (Machinery *Required to conform regulations to European CEsafety • • • • for easyinstallationodular connectivity of •

T control T P USB por orheight tip-alignment, sensor kit, accessories at any timesuchastheCCD vision M each pendant included for easyprogramming rue 3Dinterpolation andsimultaneous motion rogram switch andfluidpurge selector button t for data transfer andbackup www.fisnar.com robots F4603N ADVANCE F4503N ADVANCE F4403N ADVANCE F4303N ADVANCE • • • improvesigh positionalaccuracy dispense • Benefits

visibility ofcompletevisibility dispenseprogram W and lessrejects I the teach pendant orPC programs setupusing to beeasilyandquickly P results H ncreased productivity duetoncreased times faster productivity cycle roprietary user-friendly software allows user-friendly software roprietary Number indows provides software greater control and Item Models 600x500x150 mm Work Area 500x500x150 mm Work Area 400x400x100 mm Work Area 300x300x100 mm Work Area Description 3-Axis Robot 3-Axis Robot 3-Axis Robot 3-Axis Robot ROBOTICS 116 (24 x 20 x 6”) (32 x 28 x 32”) 810 x 717 x 815 mm 600 x 500 x 150 mm (20 x 20 x 6”) (27 x 28 x 32”) 690 x 717 x 815 mm 500 x 500 x 150 mm PTP & CP 5 kg (11 lb) USB / RS232 10 kg (22 lb) CE, CE, RoHS, WEE +/- 0.008 mm** 8 inputs / 8 outputs F4503N ADVANCE F4603N ADVANCE 3-phase micro stepping motors stepping 3-phase micro (16 x 16 x 4”) 800 / 320 mm / secs (31 / 13” / secs) (31 / 13” 800 / 320 mm / secs (23 x 24 x 25”) 590 x 617 x 645 mm 400 x 400 x 100 mm Auto-switching AC 100 - 240 VAC, 320 watts VAC, 100 - 240 AC Auto-switching 1 - 100 programs | 1 - 50,000 points / program | 1 - 50,000 points 1 - 100 programs [email protected] 21 kg (46 lb) 39.5 kg (87 lb) 44.5 kg (98 lb) 47kg (104 lb) (12 x 12 x 4”) (19 x 20 x 25”) **Repeatability will vary value method. on measurement depending F4303N ADVANCE F4403N ADVANCE F4503N ADVANCE ADVANCE F4603N 490 x 517 x 645 mm 300 x 300 x 100 mm F4000 ADVANCE Series Robots 3-Axis ADVANCE F4000 F4403N ADVANCE F4303N ADVANCE Dimensions (WxDxH) Maximum Speed (X&Y/Z) Load Work Load Tool Repeatability Motion Control System Drive MemoryData I/O Signals External Interface Supply Power Weight Approvals Item Number Maximum Working (X/Y/Z) Area Specifications ROBOTICS (Machinery Directive 2006/42/EC). (Machinery *Required to conform regulations to European CEsafety Features integrating into asafety enclosure. or as a complete stand-alone machine by The F4000ELITEcanbesuppliedindividually the user’s control ofthedispensingprocess. improveand anofflinemeasuring tool tofurther featuresAdditional functionality import CAD the dispensepath. time viewing, image capturing, and recording of camera allowsThe for additionalauxiliary real- created easily. running ofcomplex dispensingroutines to be andenablestheset-upis userfriendly and robot vision software the F4000 ELITE proprietary Specifically built for fluiddispensing processes, orientation andheight. position/ automatically adjustfor changesin part sensor (soldseparately) allow thesystem to The CCD camera visionsystem andlaserheight automated fluidplacement andpositioning. designed to offer thehighestlevel ofprecise Fisnar F4000ELITE3-axisbenchtop robots are 3-Axis Robot F4000 ELITESeries 117 • • • • • ual linearguideandballscrew mechanism • •

measuring &image capture/recordingmeasuring P path cycle R F Laser Heigh alignment C S D encoder feedback iducial Recognition System ervomotor drive controlervomotor withclosedloop rocess functionality tools such as CAD import, tools import, rocess such as CAD functionality eal-time preview &recording ofdispense CD camera vision & PC kit with automatedCD camera tip- vision&PCkit t Detect Kit included Kit t Detect www.fisnar.com 40NEIE3-Axis-400x400x100 mm Robot Work Area F4403N ELITE 3-Axis-300x300x100 mm Robot Work Area F4303N ELITE Number Item Benefits • • • • ighest level ofpositionalrepeatability +/-0.003 •

additional software functionality tools functionality additional software I component parts regardless ofdimensionalvariations of M and lessrejects I users to set-up dispenseprograms forensures curve aquickerandeasierlearning P mm improves dispenseresults H mproved process control dueto andquality duetoncreased times faster productivity cycle roprietary user-friendly camera visionsoftware roprietary ore precise andaccurate dispense results Models Description ROBOTICS 118 (16 x 16 x 4”) 54 kg (119 lb) F4403N ELITE (31 x 26.5 x 27”) 400 x 400 x 100 mm 781 x 675 x 687.5 mm PTP & CP PC Storage 6 kg (13 lb) USB / RS232 25 kg (55 lb) Servo Motor CE, CE, RoHS, WEE +/- 0.003 mm** 8 inputs / 8 outputs 800 / 250 mm / secs Auto-switching AC 100 - 240 VAC, 320 watts VAC, 100 - 240 AC Auto-switching [email protected] (12 x 12 x 4”) 49 kg (108 lb) (27 x 23 x 27”) F4303N ELITE 300 x 300 x 100 mm 681 x 575 x 687.5 mm **Repeatability will vary value method. on measurement depending F4000 ELITE Series ELITE F4000 Robots 3-Axis Approvals Weight Dimensions (WxDxH) Maximum Speed (X&Y/Z) Load Work Load Tool Repeatability Motion Control System Drive MemoryData I/O Signals External Interface Supply Power Maximum Working (X/Y/Z) Area Item Number F4403N ELITE F4303N ELITE Specifications ROBOTICS Features Directive 2006/42/EC). (Machinery *Required to conform regulations to European CEsafety a safety enclosure.* as acomplete stand-alonesystem by integrating into The F4000ADVANCE canbesuppliedindividuallyor surfaces. to-reach areas andvertical the 360°rotational plane, allowing itto access hard- dispensing at a user-specified, fixed angle around The additional 4throtational (R) axisallows for using theteach pendant (included). that canbesetupandoperational injustminutes dispensing routines (dots, lines, circles, arcs, and fills) andenablesthecreationuser friendly ofcomplex the F4000ADVANCE robot is software proprietary Specifically made for fluiddispensingprocesses, positioning. are designed to ensure precise fluidplacement and Fisnar F4000ADVANCE 4-axisbenchtop series robots 4-Axis Robot F4000 ADVANCE Series 119 • ntegral tippositionadjustment routine • • • •

I installation of productivity enhancementinstallation tools ofproductivity M control T P USB por rue 3Dinterpolation andsimultaneous motion rogram switch andfluidpurge selector button odular connectivity design forodular connectivity the simple t for data transfer andback-up www.fisnar.com F4604N ADVANCE F4504N ADVANCE F4404N ADVANCE F4304N ADVANCE • • improvesigh positionalaccuracy dispense • Benefits

and lessrejects I the teach pendant programs setupusing to beeasilyandquickly P results H ncreased productivity duetoncreased times faster productivity cycle roprietary user-friendly software allows user-friendly software roprietary Number Item 600x500x150 mm Work Area 500x500x150 mm Work Area 400x400x150 mm Work Area 300x300x150 mm Work Area Models Description 4-Axis Robot 4-Axis Robot 4-Axis Robot 4-Axis Robot ROBOTICS 120 (24 x 20 x 6”) (32 x 30 x 36”) 600 x 500 x 150 mm 860 x 752 x 914 mm (20 x 20 x 6”) (29 x 30 x 36”) 500 x 500 x 150 mm 740 x 752 x 914 mm +/- 720° PTP & CP 720° / secs 5 kg (11 lb) USB / RS232 10 kg (22 lb) CE, CE, RoHS, WEE +/- 0.008 mm** 8 inputs / 8 outputs F4504N ADVANCE F4604N ADVANCE 3-phase micro stepping motors stepping 3-phase micro (16 x 16 x 6”) 800 / 320 mm / secs (31 / 13” / secs) 800 / 320 mm / secs (31 / 13” (25 x 30 x 36”) 400 x 400 x 150 mm 640 x 652 x 914 mm Auto-switching AC 100 - 240 VAC, 320 watts VAC, 100 - 240 AC Auto-switching 1 - 100 programs | 1 - 50,000 points / program | 1 - 50,000 points 1 - 100 programs [email protected] 41 kg (90 lb) 46 kg (101 lb) 48 kg (106 lb) (115 lb) 52 kg (12 x 12 x 6”) (21 x 22 x 36”) F4304N ADVANCE F4404N ADVANCE F4504N ADVANCE ADVANCE F4604N 300 x 300 x 150 mm 540 x 552 x 914 mm **Repeatability will vary value method. on measurement depending F4000 ADVANCE Series Robots 4-Axis ADVANCE F4000 F4304N ADVANCE F4404N ADVANCE Maximum Working Maximum Working Area (X/Y/Z) (R) Area Working Max Maximum Speed (X&Y/Z) Maximum Speed (R) Load Work Load Tool Repeatability Motion Control System Drive MemoryData I/O Signals External Interface Supply Power Dimensions (WxDxH) Item Number Weight Approvals Specifications ROBOTICS enclosure.* alone machinesystem by integrating into asafety be suppliedindividuallyorasacomplete stand- material. a silicone RTV The F4000ADVANCE can components onaPCBwith ruggedizing electrical with form-in-place gasketing materials or staking/ dispensing around ledges, lips, andinsidechannels The 5-axis simultaneous positioningisalsoidealfor that canbesetupandoperational injustminutes. dispensing routines (dots, lines, circles, arcs, andfills) andenablesthecreationuser friendly ofcomplex The F4000 ADVANCE robot is software proprietary ordifficult vertical, toon curved, reachapplications. horizontal (U) axisfor applyingadhesives andsealants provides botharotational (B)axisand vertical Fisnar F4000 ADVANCE 5-axis benchtop 5-Axis Robot F4000 ADVANCE Features Directive 2006/42/EC). (Machinery *Required to conform regulations to European CEsafety 121 • • • • ntegral tippositionadjustment routine •

installation of productivity enhancementinstallation tools ofproductivity M control T P USB por I rue 3Dinterpolation andsimultaneousmotion rogram switch andfluidpurge selector button odular connectivity design forodular connectivity the simple t for data transfer andback-up www.fisnar.com robot Benefits • • improvesigh positionalaccuracy dispense •

F4505N ADVANCE and lessrejects I the teach pendant orPC programs setupusing to beeasilyandquickly P results H ncreased productivity duetoncreased times faster productivity cycle roprietary user-friendly robot allows software roprietary Number Item 500x500x150 mm Work Area Description 5-Axis Robot ROBOTICS 122 +/- 720° PTP & CP 720° / secs 1 kg (2.2 lb) USB / RS232 10 kg (22 lb) (20 x 20 x 6”) 48 kg (106 lb) (34 x 30 x 42”) CE, CE, RoHS, WEE +/- 0.008 mm** F4505N ADVANCE 8 inputs / 8 outputs 500 x 500 x 150 mm 860 x 752 x 1,065 mm 5-phase micro stepping motors stepping 5-phase micro 800 / 320 mm / secs (31 / 13” / secs) (31 / 13” 800 / 320 mm / secs Auto-switching AC 100 - 240 VAC, 320 watts VAC, 100 - 240 AC Auto-switching 1 - 99 programs | 1 - 50,000 points / program / | 1 - 50,000 points 1 - 99 programs [email protected] **Repeatability will vary value method. on measurement depending F4000 ADVANCE Series Robots 5-Axis ADVANCE F4000 F4505N ADVANCE Work Load Work Load Tool Repeatability Motion Control System Drive Maximum Speed (R) MemoryData Maximum Working (X/Y/Z) Area (R) Area Working Max Maximum Speed (X&Y/Z) I/O Signals External Interface Supply Power Dimensions (WxDxH) Item Number Weight Approvals Specifications ROBOTICS (Machinery Directive 2006/42/EC). (Machinery *Required to conform regulations to European CEsafety integrating into asafety enclosure.* or asacomplete stand-alonemachinesystem by The F4000ADVANCE canbesuppliedindividually batch production. sequentially, thuseliminating therequirement for outtwo differentoption to dispensing carry routines Furthermore, the dual-table design provides users the table isbeingprocessed by therobot. ofonetable, onthefixture whiletheother new parts andtheloadingof with theremoval offinishedparts changeover and loading time. This is made possible dueto theelimination ofpart manufacturing The unique dual-tabledesign allows for highspeed positioning. designed to ensure precise fluidplacement and F4000 ADVANCE dualtablebenchtop robots are TableDual Robot F4000 ADVANCE Series 123 Features • • • • •

P USB por manufacturing Unique dual-tabledesig M control T rue 3Dinterpolation andsimultaneousmotion rogram switch andfluidpurge selector button odular connectivity interface odular connectivity t for data transfer andback-up n for highspeed www.fisnar.com F4554N ADVANCE F4553N ADVANCE Benefits • • • • ual-table design increases rates production •

and lessrejects I the teach pendant programs setupusing to beeasilyandquickly P results H I D ncreased productivity duetoncreased times faster productivity cycle ndependent control ofeach table roprietary user-friendly robot allows software roprietary Number igh positional accuracy improvesigh positionalaccuracy dispense Item Models 500x500x150 mm Work Area 500x500x100 mm Work Area Description 4-Axis Robot 3-Axis Robot ROBOTICS 124 56 kg (123 lb) F4554N ADVANCE +/- 720° PTP & CP 720° / secs 5 kg (11 lb) USB / RS232 10 kg (22 lb) CE, CE, RoHS, WEE +/- 0.008 mm** 8 inputs / 8 outputs 3-phase micro stepping motors stepping 3-phase micro 800 / 320 mm / secs (31 / 13” / secs) (31 / 13” 800 / 320 mm / secs Auto-switching AC 100 - 240 VAC, 320 watts VAC, 100 - 240 AC Auto-switching 1 - 100 programs | 1 - 50,000 points / program | 1 - 50,000 points 1 - 100 programs 52 kg (115 lb) F4553N ADVANCE [email protected] 500 x 500 x 100 mm (20 x 20 x 4”)500 x 500 x 100 mm x 6”) 500 x 500 x 150 mm (20 x 20 740 x 717 x 659 mm (30 x 28 x 26”) 916 mm (30 x 28 x 36”) 740 x 717 x **Repeatability value will vary depending on measurement method. method. will vary depending**Repeatability on measurement value F4000 ADVANCE Series Dual Table Robot Table Series Dual ADVANCE F4000 F4554N ADVANCE F4553N ADVANCE Maximum Working Area (X/Y/Z) Area Working Maximum (R) Area Working Maximum Maximum Speed (X&Y/Z) Maximum Speed (R) Load Work Load Tool Repeatability Motion Control System Drive MemoryData Item Number I/O Signals External Interface Supply Power Dimensions: (WxDxH) Weight Approvals Specifications ROBOTICS Gantry Robots Gantry F5000 3-Axis Series (sold separately). PCsoftware teach pendant, RS232,orpropietary Programming andcontrol outvia canbecarried being used. size prevent aconventional benchtop robot from are alsoadvantageous whencomponent weight or lines or installed into automated work cells These robots are idealfor conveyor-fed automation robot. configuration that provides open access under the is suitablefor dispense applications requiring a axes above thework piece. The Unitop™ design style robots withallmoving effective gantry The robots F5000 series are andcost- compact 125 • • • • • • design andlightweight gantry-style ompact • Features

M RS232 por USB por applications D Axis r W C urable linearbeltdrive system for industrial odular connectivity interface odular connectivity ork areaork upto 300xmm epeatability 0.02mm epeatability t for data transfer t for remote operation www.fisnar.com . They Benefits • • • • eparate control box reduces robot footprint •

Item Number Item plus a CAD import utility tool utility import plus aCAD basic programming, editingofrobot programs P automation solutionfor increased throughput C oversize components andheavy Open ac environments in vacuum chamberandglovebox work S S eparate control box allows robot to beused roprietary offline allows robotPCsoftware roprietary for an be used as part of a conveyor-fedan be used as part F5300N.2 3-Axis Inline Gantry Robot Gantry 3-Axis Inline Robot Gantry 3-Axis Inline F5300N.2 F5200N.2 cess underrobot for dispensingonto Description ROBOTICS 126 F5300N.2 28 kg (62 lb) (12 x 12 x 6”) (23.5 x 19 x 22.5”) 300 x 300 x 150 mm 595 x 483 x 569 mm PTP & CP 2 kg (4.4 lb) USB / RS232 CE, CE, RoHS, WEE 0.001 mm / axis +/- 0.02 mm / axis 8 inputs / 8 outputs Micro stepping motors Micro stepping 500 / 320 mm / secs (20 / 13” / secs) (20 / 13” 500 / 320 mm / secs Auto-switching AC 100 - 240 VAC, 320 watts VAC, 100 - 240 AC Auto-switching 1 - 100 programs | 50,000 points / program | 50,000 points 1 - 100 programs [email protected] (8 x 8 x 6”) F5200N.2 25 kg (55 lb) (19 x 15 x 22.5”) 485 x 384 x 569 mm 200 x 200 x 150 mm F5000 3-Axis Series 3-Axis F5000 Gantry Robots F5300N.2 F5200N.2 Maximum Speed (X&Y/Z) Load Tool Repeatability Resolution Motion Control System Drive MemoryData I/O Signals External Interface Supply Power Weight Approvals Dimensions (WxDxH) Maximum Working (X/Y/Z) Area Item Number Specifications ROBOTICS (sold separately). PCsoftware teach pendant, RS232,orpropietary Programming andcontrol outvia canbecarried andperformance. increased productivity to beeasilyincorporatedkits onto therobot for vision system, tipalignment, andheight detect design allowsThe modular connectivity Fisnar CCD large dispensingapplications. axes above themidealfor thework area making robots industrial haveautomation. alltheir Gantry can beeasilyintegrated within-lineindustrial The F6000 ADVANCE robotic systems gantry Robots Gantry F6000 ADVANCE Series 127 Features • • • • • • • areaork upto 800x1,200mm •

installation 150 mmstandoff M encoder feedback S D Z 20 kgZ Axis r W tepper motor drive system, withclosedloop -axis motor brake mechanism ual linearguideandballscrew mechanism odular connectivity interface odular connectivity epeatability +/-0.05mm epeatability -axis payload s includedfor easyrobot www.fisnar.com F6123N ADVANCE-220 F6123N ADVANCE-110 F6603N ADVANCE-220 F6603N ADVANCE-110 Benefits • • cess design for easyintegration into • •

industrious environmentsindustrious Hea dispense results installed for easierprogramming &more precise Optional C unlimited workload componentsand heavy ispossibledueto A conveyor-fed/inline automation lines Open ac Item Number Item utomating dispenseapplications onoversize vy duty rigid frame for structure duty use in vy CD camera visionsystem canbeeasily Models 800x1,200x150 mm Work Area 800x1,200x150 mm Work Area 600x600x150 mm Work Area 600x600x150 mm Work Area 3-Axis Gantry Robot 3-Axis Gantry Robot 3-Axis Gantry Robot 3-Axis Gantry Robot 3-Axis Gantry Description ROBOTICS 128 (32 x 32 x 6”) 142 kg (313 lb) (55.9 x 70.2 x 24.9”) 800 x 1,200 x 150 mm 800 x 1,200 x 150 1,420 x 1,784 x 632 mm F6123N ADVANCE-110 F6123N ADVANCE-220 USB / RS232 +/- 0.05 mm 20 kg (44 lb) CE, CE, RoHS, WEE 8 inputs / 8 outputs 800 / 320 mm / secs Closed loop stepper motor Closed loop stepper Dual / Ball Screw Linear Guide Closed loop stepper motor with brake motor Closed loop stepper 100 - 115 VAC (F6603N-110 & F6123N-110) (F6603N-110 & VAC 100 - 115 F6123N-220) (F6603N-220 & VAC 200 - 230 1 - 100 programs | 50,000 points / program | 50,000 points 1 - 100 programs (24 x 24 x 6”) 122 kg (269 lb) (48 x 46.6 x 24.9”) [email protected] 600 x 600 x 150 mm 1,220 x 1,184 x 632 mm F6603N ADVANCE-110 F6603N ADVANCE-220 F6000 ADVANCE Series Gantry Robots ADVANCE F6000 Maximum Working Area Area Working Maximum (X/Y/Z) Item Number MemoryData I/O Signals Dimensions (WxDxH) Maximum Speed (X&Y/Z) Load Tool Repeatability Mechanism Drive (X&Y Axis) System Drive (Z Axis) System Drive External Interface Supply Power Weight Approvals F6123N ADVANCE F6603N ADVANCE Specifications ROBOTICS the capability. above the workstation, provides the F8000 series Where applications require allmoving axes to be for conveyor-fed applications. vibration while maintaining functionality. Ideal prevents aluminumstructure duty flexing and driven, robots. ballscrew design, gantry Aheavy The of robots F8000 series motor- are servo Robots Gantry F8000 Series Specifications 129 Features • • • • • motors C servo • Repeatability (R) X&Y/Z Speed Maximum ToolMaximum Load Weight (WxDxH) Dimensions System I/O, User I/O ControlMotion Drive System Data Memory Resolution (R) Working Area (X/Y/Z) Number Item

100 pr Open ac H R A A epeatability of0.02mm epeatability vailable inthree andfour axismodels ighly rigid frame structure ograms onboard cess design for in-lineoperation (R) (F8100N: 254 lb, F8104N:273lb) F8100N: 115kg, F8104N:124kg ,0 0 0 m(/ 6° 800x600200mm(+/-360°) 1,000 x800200mm(+/-360°) 1,425 x1,630627mm www.fisnar.com F8100N Series (56 x6425”) 100 programs /20,000steps /20,000points 24 inputs/6outputs, 32inputs/6outputs Number 80N4-Axis-800x600x200mm Robot Work Area F8804N 3-Axis-800x600x200mm Robot Work Area F8800N 4-Axis-1,000x800x200mm Robot Work Area F8104N 3-Axis-1,000x800x200mm Robot Work Area F8100N +/- 0.02mm/axis(+/-0.058³) Item 1,000 &500mm/secs(360°) 0.001 mm(+/-0.001°) AC motor servo 5 kg(11lb) PTP &CP (F8800N: 159 lb, F8804N:179lb) Custom robot sizes available uponrequest. F8800N: 72kg, F8804N:81 kg Models 1,110 x1,380565mm Description F8800N Series (44 x5422”)

ROBOTICS 130 (+/- 360°) 43 kg (95 lb) (46 x 40 x 20”) F9800N Series 800 x 600 x 200 mm 1,179 x 1,022 x 505 mm Models Custom robot sizes available upon request. available sizes robot Custom Description (+/- 360°) 7 kg (15 lb) 37 kg (81 lb) USB / RS232 220 - 240 VAC 220 - 240 (39 x 40 x 20”) F9600N Series 600 x 600 x 200 mm 979 x 1,022 x 505 mm 0.001 mm (+/- 0.001°) Item F9300N Area Work Robot mm - 300x300x200 3-Axis F9304N Area Work Robot - 300x300x200 mm 4-Axis F9600N Area Work Robot mm - 600x600x200 3-Axis F9604N Area Work Robot mm - 600x600x200 4-Axis F9800N Area Work Robot - 800x600x200 mm 3-Axis F9804N Area Work Robot - 800x600x200 mm 4-Axis Number 1,000 & 500 mm / secs (360°/secs) 100 programs / 20,000 steps / 20,000 points / 20,000 points / 20,000 steps 100 programs 24 inputs / 6 outputs, 32 inputs / 32 outputs 24 inputs / 6 outputs, [email protected] (+/- 360°) 29 kg (64 lb) (27 x 27 x 20”) F9300N Series 679 x 696 x 505 mm 300 x 300 x 200 mm cess design for in-line operation for design cess ograms on board ograms

ighly rigid frame structure frame ighly rigid vailable in three and four axis models axis four and in three vailable epeatability of 0.02 mm

100 pr H Open ac A R A

Maximum Speed X&Y/Z (R) (R) Load Tool Maximum Resolution (R) MemoryData I/O User I/O, System External Interface Supply Power Dimensions (WxDxH) Item Number Working Area (X/Y/Z) Area Working Weight • • • • • • C servo motors Specifications Features These robots can be manufactured to accommodate custom custom accommodate manufacturedbe can to robots These 8 m x 6 m. up to sizes Gantry industrial robots have all their axes above the work the work above Gantry all their axes have industrial robots and applications dispensing making large area them ideal for valve. a spray such as when using a fourthjobs requiring axis, The F9000 gantry robotic systems can be easily integrated be easily integrated can F9000 gantryThe systems robotic with in-line industrial automation. Robots F9000 SeriesF9000 Gantry ROBOTICS auto-calibration routine and part alignment function. routine andpart auto-calibration optimized by the simple and repeatabilityDispense positional is accuracy further being automatically adjusted to suit. image. Any difference found in X or Y position results in the dispense coordinates and usingpattern recognition to software compare thelive imageagainstastored the system an image of two separatecapturing fiducial locations on the component guarantee fluidisbeingdispensed at the requiredexact location. This isachieved by to alignment function Vision system issuppliedwithanauto-part software etc). operation out(dispensedot, wishedto linestart, becarried to jogthe robot required to theexact the dispenselocation, andthenselecting controlled by Fluid-In-Motion (FIM)software usingthedisplayed camera image Dispense programs are created andeasilyintheFisnar vision- quickly proprietary and reduced processing timeandcosts. dueto precisequality dispensepositioningalongsideimproved yield production for creating bothsimpleandcomplex dispenseroutines. This results inimproved andintelligentA powerful CCD visionprogramming andauto adjustment system CCD Camera Vision System 131 Fisnar application team. all applications. To by becertified notsuitablefor*Glue checkfunction Features • • • • • • • uto 3-axistipcalibration function • functions. and management program setup accessing Used for quickly Tool Ribbon the line. on bydirectly clicking Values canbeedited dispense program. view ofcomplete Gives fullandsimple Window Programming

Glue check/v I software Q software Simple &fasttr LED Ligh H A A ndustrial ndustrial Windows basedPCsystem included uxillary camera to monitor dispenseprocessuxillary live igh resolution CCD camera uick setup, easyto program/operate usingproprietary t &Brightness Controller erification function* ansfer data ofCAD (.DXF/Gerber) into For simpleusersetup, programming, andoperation. Proprietary UserProprietary Interface www.fisnar.com quick robot programming. Graphical icons usedfor FunctionDispense Benefits • • • • ision system canbeeasilyinstalledat any timeonto a •

relating program to beautomatically selected QR c process control purposes I reducing space envelope takenup P P F4000 orF6000ADVANCE 3-axisrobot V mages canbecaptured andstored for and quality eripheral hardware is mounted onto directly robot lug andplay system design odes canbescannedby thecamera, causingthe and viewrobot program. stop,Icons usedto start, ActuationRobot F6000AKIT-VISION F4000AKIT-VISION Item Number Item coordinates. relative dispense displaying absolute/ and speedwhilealso robot movement Icons usedto control MovementRobot position clickedon. area willjogrobot to onimaging Clicking positional control. to ensure precise dispense location Cross hairdesignates camera viewingarea. timeviewof Real Camera Display ROBOTICS 1 132 4 6 *Height sensor sold separately 3 4 [email protected] 5 2

Aux Camera Aux the onto the fluid being dispensed clearly monitor the user to allowing monitor TFT LCD image on the a live Displays partcomponent while a dispense cycle is taking place. Tip Calibration Module Calibration Tip it against a compare to recognition fluid and uses pattern capturing an image of the purged the camera by Works values coordinate Y result in the X and positions center the found between pre-defined difference Any image. datum the by calibrated automatically is Z-axis The re-aligning suit. to program dispense and adjusted automatically being pad. dispense tip contacting a touch LED Ring & Controller Light robot the directly onto is mounted controller brightness Adjustable light and definition. optimizing image contrast For envelope. space the overall reduce to Industrial specification PC installed with Windows 7 and Fluid-In-Motion (FIM) software ready to use. Unit mounted Unit mounted Fluid-In-Motionto use. ready (FIM) software7 and Windows Industrial PC installed with specification and mouse included. keyboard, monitor, TFT LCD envelope. space overall reduce to robot directly onto Camera CCD image capturing. and grayscale color high resolution For Highly robust and durable based on their cast aluminium base and heavy based on their cast aluminium dutyHighly and durable extruded robust aluminum twin vertical dispensing and precision long term for allows concept design rigid This side pillars supporting X-axis. horizontal the dependable repeatability. PC F4000 ADVANCE Benchtop Robot Benchtop F4000 ADVANCE

1

6 5

3 2

4 Vision System Kit Contents System Vision ROBOTICS 133 position dependingonthe specific application process.or vertical components canbemadeeasy withthedeviceDispensing onto mounted cylindrical ineitherahorizontal Vertical Mounting:For applications that require dispensingonto multipleplanesonasingleworkpiece. Horizontal mounting allows theCCD visionsystem to beusedinapplications requiring 4-axismotion. configuration the rotatesworkpiece instead, achieving the same end result. the robot Z-axis rotates that typically onaconventional 4-axisrobot. With this due to size orweight ofthedispenseequipment that attached isnormally to Horizontal Mounting: When 4-axis (R) rotation is required but not possible mounted onto aF4000 ADVANCE 3-axisrobot. options: Mounting allows and easily RotationModule The anadditional axisto Auxiliary be quickly Rotation Axis Auxiliary production environment.production it simplefor use ina making run through control anexternal canalsobe This functionality downtime.production dispense results andminimal position. This ensures consistent based onthenewdispensetip ontherobot thata function willautomatically offset theprogram With the tip alignment module installed, the user can simply could alter thepositionofdispensingneedle. applications that require frequent material ortipchanges, which of tip alignmentA series modules designed for precise dispensing AlignmentAutomatic Tip programming. adjustments canbeeasilymadeby usersnottrained inrobot outremotely canbecarried to theprogramRe-alignment and locationadjusted ittooftherobot by aknown program. re-aligning The TA360U-KIT allows andeasily thedispense tipto bequickly adjusted intheX, Y, andZaxis. mounting hardware attached to therobot to bemechanically The TA360U-KIT allowing the isamechanicaltipadjustment kit Alignment TipMechanical Item Number Item 60AI-A Tip Alignment for Module F6000ADVANCE 3-Axis Robots F6000AKIT-TA3 Tip Alignment for Module F4000ADVANCE 4-Axis Robots F4000AKIT-TA4 Tip Alignment for Module F4000ADVANCE 3-Axis Robots F4000AKIT-TA3 A20. Tip Alignment for Module F4200N.2&F5000N.2Robots TA4200N.2 A00 Tip Alignment for Module F8000&F90003-Axis Robots TA9000N www.fisnar.com run Description Item Number Item TA360U-KIT F4000AKIT-AUX Item Number Item ROBOTICS 134 Item Number F4000AKIT-HDS F6000AKIT-HDS Description Description [email protected] Remote Operation Box Operation Remote I/O Expansion Module - PNP Signal I/O Expansion Module - NPN Signal Remote Operation Box with Safety Relay with Safety Box Operation Remote Item Number Item Number F4000AKIT-IOPNP F4000AKIT-IONPN F4000AKIT-EXTBOX F4000AKIT-EXTBOX-SR

A version is also available with a safety relay (Category 3, PL d) incorporated PL d) 3, (Category relay a safety with also available is A version curtain a light be easily directly inside allowing to switch or safety additional cost for the need eliminates This box. the control connected to an unnecessary be fitted. for panel to electrical control The remote operation box allows users to operate the robot from a safe a safe from the robot operate users to allows box operation remote The enclosure. is housed within a safety when the robot or in instances distance The I/O expansion module increases the number of robot inputs to 16 inputs to number of robot the module increases I/O expansion The models (NPN or PNP) different Two 20 channels. channels and outputs to The type depending on the I/O signal of the external devices. available are the PCB inside the damage caused to any also prevents use of this device of the external incorrect wiring device. or failure due to robot The I/O expansion module increases the number of inputs and outputs the module increases I/O expansion The the robot. sensors) to while simplifying connection of external (e.g. devices

Remote Operation Box Operation Remote I/O Expansion Module By the actual comparing workpiece against the original height in found deviation any program, robot in the value datum stored being data coordinate Z-axis the in workpieceresults the height checks can be Multiple height accordingly. offset automatically workpieces of multiple in the event program made within one robot heights. single workpiece or a with differing being processed The height sensor automatically adjusts the dispense tip height the dispense tip height adjusts sensor automatically height The of workpieceof the height being variation of any in the event is sensor height the of Setupupon. dispensed programming and pre- procedure user friendly a step-by-step carried following out by software. the robot installed onto Height SensorHeight ROBOTICS 135 F1300N F9000 SERIES F8000 SERIES F6123N ADVANCE F6603N ADVANCE F4403N ELITE F4303N ELITE F4554N ADVANCE F4553N ADVANCE F4505N ADVANCE F4604N ADVANCE F4504N ADVANCE F4404N ADVANCE F4304N ADVANCE F4603N ADVANCE F4503N ADVANCE F4403N ADVANCE F4303N ADVANCE F5300N.2 F5200N.2 F4200N.2 Robots Robot AccessoriesRobot Compatibility Chart

• • • • • • • • • • • • F4000AKIT-VISION

• • • • F6000AKIT-VISION

• • • • • • • TA360U-KIT

TA4200N.2 www.fisnar.com F4000AKIT-TA3

• • • • • F4000AKIT-TA4 • • • • F6000AKIT-TA3 • • TA9000N Accessories

• • • • • • • • • • • • • • • • • • • • • • • • F4000AKIT-AUX

• • • • • • • • • • • • • • • • • • • • F4000AKIT-HDS • • • • • • • • • • • • • • • • • • • • F6000AKIT-HDS • • • • • • • • • • • • • • • • • • • • • • • • F4000AKIT-IONPN

F4000AKIT-IOPNP

• • F4000AKIT-EXTBOX

F4000AKIT-EXTBOX-SR Accessories

Robots TA9000N TA4200N.2 TA360U-KIT F4000AKIT-TA3 F4000AKIT-TA4 F6000AKIT-TA3 F4000AKIT-AUX F4000AKIT-HDS F6000AKIT-HDS F4000AKIT-IOPNP F4000AKIT-IONPN F4000AKIT-VISION F6000AKIT-VISION F4000AKIT-EXTBOX F4000AKIT-EXTBOX-SR F1300N • •• F4200N.2 •• •••• F5200N.2 • • ••••• F5300N.2 • • ••••• F4303N ADVANCE ••• •••••• F4403N ADVANCE ••• •••••• F4503N ADVANCE ••• •••••• F4603N ADVANCE ••• •••••• F4304N ADVANCE • ••••• F4404N ADVANCE • ••••• F4504N ADVANCE • ••••• F4604N ADVANCE • ••••• F4505N ADVANCE •••• F4553N ADVANCE •• •••• F4554N ADVANCE • •••• F4303N ELITE •••• F4403N ELITE •••• F6603N ADVANCE •• • ••••• F6123N ADVANCE •• • ••••• F8000 SERIES • F9000 SERIES • ROBOTICS Suitable for usewiththefollowing platforms: to reduce robot times. cycle The Z-axis mounting positioncanalsobeadjusted to reduce movement working to inorder theworkplace withoutlosingtheoriginal datum mounting position. re-installed Their unique design allows for valves removed to bequickly for maintenance requirements andthen installation, removal, andsetupexperience. plug-and-play assembly, forKitted easy out-of-the-box, designed to create a smooth and convenient holderassembliesfor usewithFisnar’s valve quality andcartridge High lineofrobots anddispensesystems. Universal HolderAssemblies Robot 137 • • • TableRotary • • •

F9000 S F8000 S F6000 S F5000 S F4000 S F1300N eries Gantry (3-Axis) Gantry eries (3-Axis) Gantry eries (3-Axis) Gantry eries Benchtoperies (3-Axis) Benchtoperies (3,4,and5-Axis) www.fisnar.com

ROBOTICS 138 MX150 PosiPump™, 5601800U Holder For use with DTD50, use with DTD50, For Universal Holder Universal TS5000DMP, Pz1200 & TS5000DMP, Valve Holder Valve For use with CR300 For For use with CV629 For Cartridge Retainer 562064U Universal 561785U 1/10th Gallon cartridge retainers 562297-TU 20oz 562297-TU For use with CR570 & 101-20R For Cartridge Retainer Holder VDP150 Universal 5601801U Valve Holder Valve PDV-1000, VMS400 PDV-1000, & For use with VMP30H, use with For Valve Holder Valve Retainer Holder For use with 710PT-U For 561355U Universal metal cartridge retainers 560926-TU Cartridge 560926-TU For use with 2.5, 6, 8 & 12 oz use with 2.5, 6, 8 & 12 oz For Holder SV1000SS 562088U For use with For Universal Valve Valve Universal cartridge retainers 562297-SU 20/32oz 562297-SU 20/32oz [email protected] For use with 20/32 oz Semco use with 20/32 oz For Cartridge Retainer Holder Valve Holder Valve Retainer Holder For use with 790HP-LF For 560927U Universal 562151U Universal nylon cartridgenylon retainers 560926-NU Cartridge For use with 2.5, 6, 8 & 12 oz use with 2.5, 6, 8 & 12 oz For Valve Holder Valve VD510 & SV2000N For use with VP300, use with For cartridge retainers 562297-EU 20/32oz For use with 20/32 oz EFD use with 20/32 oz For Cartridge Retainer Holder

Valve Holder Valve & 55 cc syringes & 55 cc

Retainer Holder Syringe Holder Syringe 560928U Universal For use with MV-0180LF For EFD cartridge retainers For use with 3, 5, 10, 30 For 560920U Universal 560920U Universal For use with 2.5, 6 & 12 oz use with 2.5, 6 & 12 oz For

560926-EU Cartridge Universal Syringe, Valve & Cartridge Retainer Holders Valve Syringe, Universal ROBOTICS 139 0401-08-000487 0401-08-000248 0401-08-000683 Modular Cartridge Retainer Configurations Retainer Cartridge Modular 0401-08-000490 Modular Syringe & Modular Valve Configurations 0401-08-000488 0401-08-000491 0401-08-000525 Spare parts identifierguide located onpages145 &146. Spare parts www.fisnar.com 0401-08-000766 0401-08-000524 0401-08-000486 0401-08-000484 0401-08-001408 0401-08-000542 0401-08-000523 0401-08-000489 0401-08-000485 0401-08-001586 0401-08-001357 0401-08-001550 0401-08-000483 ROBOTICS 140 [email protected] eries Gantry (4-Axis)

F8000 S F9000 S

• • eries Gantry (4-Axis) Suitable for use with the following platforms: the following use with Suitable for The Z-axis mounting position can also be adjusted position can also be adjusted mounting Z-axis The the workplace in to working movement reduce to cycle times. robot minimize to order Their unique design allows for valves to be quickly be to valves for allows unique design Their then re- requirements maintenance for removed datum installed without losing the original position. mounting Kitted for easy out-of-the-box,Kitted for plug-and-play and smooth a create to designed assembly, and setup removal, installation, convenient experience. High quality assemblies for use with Fisnar line of High use with Fisnar quality assemblies for and dispense systems. robots Allows for valves, syringes, and cartridge and syringes, retainers valves, for Allows at fixed and the bracket directly to be mounted to 90°. 0° to an angle from Holder assemblies for 4-axis gantry for Holder assemblies style robot platforms. Holder Assemblies 4-Axis Universal Gantry Gantry Universal 4-Axis ROBOTICS 141 Gantry Syringe Holder4-Axis Gantry 4-Axis Universal Syringe, Valve, Retainer &Cartridge For usewith790HPSeries Valves Gantry Gantry Valve Holder4-Axis Metal Cartridge Retainer Retainer Cartridge Metal 562055-TU 562195BU 562220U Holder Gantry Gantry Valve Holder4-Axis For usewith VP300, SV2000N& For usewithMV-0180 Valve EFD Cartridge Retainer Retainer EFD Cartridge www.fisnar.com Gantry ValveHolder Gantry Holders 562055-EU 562195VU VD510 Series 562158U Holder Gantry Gantry Valve Holder4-Axis CR300 Cartridge Retainer Retainer CR300 Cartridge Nylon Cartridge Retainer Retainer Cartridge Nylon For usewithSV1000SS 562055-NU 562089U 562050U Holder Holder ROBOTICS 142 Bushing included. 0401-08-000542 0401-08-000246 0401-08-000487 0401-08-000523 0401-08-001550 0401-08-001499 0401-08-000488 0401-08-000483 [email protected] Bushing included. 0401-08-000766 Spare partsSpare on pages 145 & 146. identifier guide located 0401-08-000246

0401-08-000524

0401-08-000489 0401-08-000485 4-Axis Modular Syringe & Valve Configurations Valve Modular & 4-Axis Syringe 4-Axis Modular4-Axis Cartridge Retainer Configurations 0401-08-000491 ROBOTICS Suitable for usewiththefollowing platforms: rate. system whileoptimizingfluid prefilledflow cartridge retainers. Idealforcartridge feeding avalve from a Compatible with3-axis robots and corresponding Syringe, Valve, Configurations Modular Retainer &Cartridge Cartridge Retainer & Retainer Cartridge Valve Backplate 143 • • TableRotary • • • •

0401-08-000490 0401-08-000489 0401-08-000488 0401-08-000487 0401-08-001408 F9000 S F8000 S F6000 S F5000 S F4000 S F1300N eries Gantry (3-Axis) Gantry eries (3-Axis) Gantry eries (3-Axis) Gantry eries Benchtoperies (3-Axis) Benchtoperies (3-Axis) 0401-08-001586 0401-08-001550 0401-08-000250 0401-08-000249 Spare parts identifier guide located onpages145 &146. Spare parts www.fisnar.com 0401-08-000491 0401-08-000525 0401-08-000483 0401-08-000766 CR300 with790HP-LF valve. Example configuration 0401-08-000524 0401-08-000542 0401-08-000484 0401-08-000683 0401-08-000523 ROBOTICS 144 0401-08-000523 0401-08-000683 0401-08-000524 0401-08-000491 0401-08-000484 cartridge retainer. 0401-08-000248 Example configuration 790HP valve and CR300 valve 790HP Example configuration 0401-08-000542 0401-08-000483 0401-08-001357 0401-08-000766 0401-08-000525 0401-08-000543 [email protected] 0401-08-001408 0401-08-000488 Spare partsSpare on pages 145 & 146. identifier guide located 0401-08-000250 0401-08-001586 0401-08-000487 eries Benchtop (3-Axis) (3-Axis) eries Benchtop

F5000 S F4000 S Example configuration dual syringe and light guide. dual syringe and light Example configuration 0401-08-000490

0401-08-000489 0401-08-001550 • • (3-Axis) eries Benchtop

Modular Backplate Configurations Multi-Syringe, Valve, or Cartridge Retainer Valve, Multi-Syringe, Suitable for use with the following platforms: use with the following Suitable for Compatible with all 3-axis robots and corresponding cartridge retainers. Ideal for simultaneous dispensing simultaneous cartridge Ideal for and corresponding robots with all 3-axis retainers. Compatible and cartridges productivity valves, when increased is required. syringes, from Backplate Syringe & Valve Holder Valve Backplate & Syringe ROBOTICS 145 0401-08-000766 0401-08-000524 0401-08-000683 0401-08-000483 0401-08-001499 0401-08-000523 0401-08-000491 0401-08-000485 0401-08-000525 0401-08-000484 0401-08-000542 0401-08-001550 0401-08-000489 0401-08-000488 0401-08-000486 0401-08-000246 0401-08-001357 Item Number Item Universal Valve Holder-For usewith VP300, VD510 &SV2000N Spare Parts www.fisnar.com Universal Cartridge Retainer Holder 2.5,6&12oz Retainer Universal Cartridge Nylon Cartridge Retainer Holder2.5,6&12oz Retainer Cartridge Nylon For usewith3,5,10,30&55cc syringes 4-Axis Angled SlidingPlate Holder 3-Axis Square SlidingPlate Holder 3-Axis Square SlidingPlate Holder 3-Axis Cartridge Retainer Holder Retainer 3-Axis Cartridge 4-Axis Gantry Mounting Bracket Mounting 4-Axis Gantry Universal 710PT-U Valve Holder For usewithMV-0180LF Valve Syringe HolderBottom Plate For usewithSV1000SS Valve For usewith790HP-LF Valve 3-Axis SlidingPlate Holder Cartridge Retainer Holder Retainer Cartridge For usewithCV629 Valve Universal ValveHolder Universal ValveHolder Universal ValveHolder Universal ValveHolder Sliding Bracket Holder 2.5, 6,8&12oz Metal EFD Retainers Series ValvesSeries Description ROBOTICS 146 Description EFD Retainers Semco Retainers Adapter Nut Holder Adapter CR300 (1/10th Gallon) UV Light Guide Holder Guide UV Light 3-Axis Backplate3-Axis Holder Cartridge Retainer Holder Gantry Robot Holder Plate Mixer Sleeve Bushing - Blank Sleeve Mixer Mixer Sleeve Bushing Holder Sleeve Mixer Mixer Sleeve Bushing - 8 mm Sleeve Mixer Syringe Holder Bushing - 3 cc Syringe Holder Bushing - 5 cc Syringe Mixer Sleeve Bushing - 10 mm Sleeve Mixer Syringe Holder Bushing - 10 cc Syringe CR570/101-20R MetalCR570/101-20R Retainers Benchtop Robot Spacer Bracket Robot Spacer Benchtop Sleeve Bushing for RobotKit-300PBMLTPU Bushing for Sleeve UV Light Guide Holder for QX4 Light Guide Light QX4 Holder for Guide UV Light BlueWave® Light Guide 10 mm, End of Wand Guide 10 mm, End of Light BlueWave® Universal Cartridge Universal with 20 oz use Retainer for Holder Universal Cartridge Universal with 20 & 32 oz use Retainer for Holder Universal Cartridge Universal with 20 & 32 oz use Retainer for Holder [email protected] Spare Parts Spare Item Number 0401-08-000250 0401-08-0016290401-08-001707 0401-08-001708 RobotKit-EADP400-85MLTPU Bushing for Sleeve 0401-08-001698 RobotKit-EADP200-70MLTPU Bushing for Sleeve 0401-08-001699 0401-08-001700 0401-08-000769 0401-08-001693 0401-08-001694 0401-08-000490 0401-08-001630 0401-08-000249 0401-08-0005430401-08-000777 & Cartridge Retainer Backplate Valve Multi-Syringe, 0401-08-001408 0401-08-000487 0401-08-000775 0401-08-001586 0401-08-001701 0401-08-001692 ROBOTICS 147 PosiPump™ V-Series oiup -eis5080 610U5601800U 5601800U 5601800U PosiPump™ I-Series Valve Bracket Holder&Stand Compatibility Chart 9HS-F502U502U502U522U502U560671U 560927U 562220U 560927U 560927U 560927U 790HPSS-LF V08S 698 698 698 618 698 560536U 560928U 562158U 560928U 560928U 560928U MV-0180SS V08L 698 698 698 618 698 560536U 560928U 562158U 560928U 560928U 560928U MV-0180LF D1-V525U525U525U529V 611 562143U 562151U 562195VU 562151U 562151U 562151U VD510-UV D-005081 610U5081 610U562235U 5601801U - 5601801U 5601801U 5601801U PDV-1000 V00S528U528U528U528U528U562054U 562088U 562089U 562088U 562088U 562088U SV1000SS D1-S525U525U525U529V 611 562143U 562151U 562195VU 562151U 562151U 562151U VD510-SS 9H-F502U502U502U522U502U560671U 560927U 562220U 560927U 560927U 560927U 790HP-LF V00 611 611 611 615U525U562054U 562151U 562195VU 562151U 562151U 562151U SV2000N M3H5081 610U5081 610U562235U 5601801U - 5601801U 5601801U 5601801U VMP30H 1P- 635 635 635 635 562054U 561355U - 561355U 561355U 561355U 710PT-U M405081 610U5081 610U562235U 5601801U - 5601801U 5601801U 5601801U VMS400 D105081 610U5081 610U562235U 5601801U - 5601801U 5601801U 5601801U VDP150 z205080 610U5601800U 5601800U 5601800U Pz1200 avs3&5Ai -xs3Ai -xsF30 Workbench F1300N 4-Axis 3-Axis 4-Axis 3&5-Axis Valves D1 611 611 611 615U525U562143U 562151U 562195VU 562151U 562151U 562151U VD510 V2 604 604 604 604 562166U 562064U - 562064U 562064U 562064U CV629 P0 611 611 611 615U525U562143U 562151U 562195VU 562151U 562151U 562151U VP300 610U5080 5601800U 5601800U 5601800U F4000, F5000&F6000 Series Robots Series www.fisnar.com F8000 & F9000 Series F8000 &F9000Series Robots - - - 610U562318U 5601800U 562318U 5601800U 562318U 5601800U Rotary Rotary Table Stands ROBOTICS 148 - - - Stands Workbench Table Rotary 562297-TU 560534U 562297-EU 562297-SU - - - Robots F8000 & F9000 SeriesF8000 & F9000 [email protected] Compatibility ChartCompatibility Series Robots 560920U 560920U 560920U 562195BU 560920U 560021U 561785U 561785U 561785U 562050U 561785U 560549U F4000, F5000 & F6000 F4000, F5000 & 560926-TU 560926-TU 560926-TU 562055-TU 560926-TU 560535U 562297-TU 562297-TU 562297-TU 560926-EU 560926-EU 560926-EU 562055-EU 560926-EU 562297-SU 562297-SU 562297-SU 562297-EU 562297-EU 562297-EU 560926-NU 560926-NU 560926-NU - 560926-NU 560535-NU

20 oz T-Type 20 T-Type oz 1/10th Gallon

Syringe Holder Syringe 20/32 oz E-Type 20/32 oz 3, 5, 10, 30/55 cc Cartridge Holder Cartridge Holder Cartridge Holder Cartridge Holder Cartridge Holder 20/32 oz S-Type 20/32 oz Cartridge Holder 6, 8, 12 oz N-Type 6, 8, 12 oz Syringe/Retainer 3 & 5-Axis 4-Axis 3-Axis 4-Axis F1300N 2.5, 6, 8, 12 oz T-Type 2.5, 6, 8, 12 oz

2.5, 6, 8, 12 oz E-Type 2.5, 6, 8, 12 oz Cartridge Stand & Holder Bracket Retainer/Syringe Cartridge Holder 2.5, ROBOTICS robot ordispensecontroller. containsapplications. thedispensehardware Eachkit that auserrequires to to aFisnar connect dispensing speciallydesigned to robot accommodate kits themostpopulardispense A range ofpre-packaged 149 Robot Kits Robot www.fisnar.com ROBOTICS 150 [email protected] Item Number Item Number Item Number ROBOTKIT-6OZTU ROBOTKIT-6OZNU ROBOTKIT-300MLU artridge Retainer

z Techcon Cartridge Techcon z

ll additional required dispense accessories dispense ll additional required ll additional required dispense accessories ll additional required ll additional required dispense accessories dispense ll additional required

A 6 o CR300 C A A 6 o

• • z Nylon Cartridge Retainer • • • • Includes: for for components bracket all required Contains a CR300 cartridgemounting 3, 4, to retainer directly to in order robots and 5-axis benchtop 1/10th gallon (300 ml) from dispense fluid material cartridges. Robot Kit 300MLU Robot Kit 300MLU Includes: components components bracket all required Contains for cartridge 3, to retainer Techcon a 6 oz mounting directly to in order robots 4, and 5-axis benchtop the cartridge. from dispense fluid material Robot Kit 6OZTU Includes: components components bracket all required Contains for cartridge 3, 4, nylon to a 6 oz mounting retainer directly to in order robots and 5-axis benchtop the cartridge. from material dispense fluid Robot Kit 6OZNU ROBOTICS Includes: optimized fluidflow rate. to dispensevalve,material cartridge resulting in Reduces material flow path length from benchtop robot. a 790HP-LF high-pressure spoolvalve to 3-axis retainer and mounting bothaCR300cartridge Contains allrequired bracket components for 300+790U Kit Robot Includes: fed to thevalve inasafe andcontrolled manner. fluid materials are pressurizedcyanoacrylate and fluidmaterials.cyanoacrylate The system ensures 5-axis benchtop robot for thedispensingof mounting a VD510 diaphragm valve to 3,4,and Contains all required bracket components CAU Kit Robot 151 • • • • • • •

A 790HP Retainer pressure insideCR300Cartridge P CR300 C A IJ2601N-SS VD510 ressure regulator assemblyfor controlling fluid ll additionalrequired dispenseaccessories ll additionalrequired dispenseaccessories -LF highpressure spoolvalve artridge Retainer artridge -SP ROBOTKIT-300+790U ROBOTKIT-CAU Item Number Item Item Number Item www.fisnar.com fluid for ROBOTICS 152

ANCE-110 ANCE-220 F8800N F9300N F9600N F9800N F6123N ADV F6123N ADV F8100N [email protected]

• • • • • • • election Kit Item Number ANCE ANCE-110 ANCE-220 ANCE ANCE ANCE ANCE ROBOTKIT-EADP400-85MLTPU

ir Line Block Assembly ir Input Line with 1/4” NPT Fitting ir Input Line with 1/4” inch Tube Samples inch Tube ample Mix Nozzles for each size kit each size ample Mix for Nozzles uer Lock Adapters Adapters uer Lock .E. Tubing 1/4” x 0.170” - Natural 40” long 40” - Natural x 0.170” 1/4” Tubing .E.

A A P S P DCK800 Dispense Needle S L F6603N ADV F4603N ADV F6603N ADV F4503N ADV F4553N ADV F4303N ADV F4403N ADV

• • • • • • • • • • • • • •

Kits come complete with the following accessories to begin production begin to accessories with the following Kits complete come testing: Robot Kit 400 ml 400 ml (200 ml/200 ml) twin pack cartridge kit all 3-axis robots. for valve dispenser with 710PT-U suitable dispenser pneumatic Sulzer Contains Compatible medium viscosities. to low most for with most F-style and C-style ml dual 400 Sulzer 1:1 and cartridges. for use out of the box Ready to kits adapt to included conversion ratios, mix 2:1 4:1 and 10:1. to The Fisnar line of twin-pack robot kits are specifically designed to kits line of twin-pack specifically designed robot are Fisnar The Robot kits suit the following Fisnar robots: Robot Fisnar kits suit the following Twin-Pack Robot Kits Twin-Pack and/or 400 ml cartridges 50, 200, a varietyaccommodate of from robots. Designed benchtop line of 3-axis use with the Fisnar manufacturers for cartridge hold and dispense Setupto a can be used with or without systems. thinner materials. for shut off material precise more for pinch tube valve ROBOTICS ratios, conversion includedto adapt to 4:1and 10:1. kits 200 mldualcartridges. R Sulzer andC-style withmostF-style to mediumviscosities. Compatible 3-axis robots. Contains Sulzer pneumatic dispenser suitable for most low with710PT-U kit packcartridge valve200 ml(100ml/100ml)twin for all 200ml Kit Robot for 300mlxml, 2:1for 300mlx150ml, and4:1for 300mlx75ml. high viscosities. Compatible withmostPlas-Pak 1:1 dualcartridges. style 3-axis robots. Contains Sulzer pneumatic dispensersuitablefor low to with710PT-U kit packcartridge valve600 ml(300 ml/300 ml)twin for all 600ml Kit Robot 153 adapt to 4:1and10:1. use out of the box for 1:1 and 2:1 mix ratios, conversion included to kits Sulzer 400mldualcartridges. R andC-style with mostF-style for thicker, materials high viscosity requiring more thrust. Compatible 3-axis robots. Contains Sulzer pneumatic dispenserwithlarger aircylinder with710PT-U kit pack cartridge valve400 ml(200ml/200ml)twin for all 400ml Kit Robot 4:1 and10:1. 1:1 and2:1mixratios, pistons includedto convert to outofthebox for Sulzer dual cartridges. Ready-to-use viscosities. Compatible andB-style withmostA-style pneumatic 710PT-U valve for all 3-axis robots. Contains 50 ml with kit packcartridge 50 ml(25ml/25ml)twin Robot Kit 50ml Kit Robot dispenser suitablefor mostlow to medium Robot Kits - Other Available -Other Models Kits Robot outoftheboxeady-to-use for 1:1 and 2:1mix www.fisnar.com

eady-to- ROBOTKIT-EADP400-100MLTPU ROBOTKIT-EADP200-70MLTPU ROBOTKIT-300PBMLTPU ROBOTKIT-50MLTPU Item Number Item Item Number Item Item Number Item Number Item

Notes

www.fisnar.com Notes

[email protected] Notes

www.fisnar.com Notes

[email protected]

About Us Fisnar® is a leading manufacturer and supplier of precision fluid dispensing and handling solutions.

With over 45 years of knowledge of the dispense industry and its global requirements, we have an accomplished range of dispensing products including robots, valves, dispensers, and a complete selection of consumables. Armed with technical expertise and a diverse portfolio of dispensing products, Fisnar® can supply a system to suit every budget, application, and industry.

Visit our website: www.fisnar.com.

Contact Us USA [email protected] 1 (262) 253-8600

Europe [email protected] +44 (0) 1355 577222

Asia [email protected] +852 2389-2827

India [email protected] +91-11-4556-6223-5 www.fisnar.com

Copyright © 2020 Ellsworth Corporation. All rights reserved.