DOCSLIB.ORG

Honeywell Safety Products Eye, Face, Head & Welding I Eyesight Is an Essential Sense and Deserves to Be Protected

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Honeywell Safety Products Eye, Face, Head & Welding I Eyesight Is an Essential Sense and Deserves to Be Protected Honeywell Safety Products Eye, Face, Head & Welding I Eyesight is an essential sense and deserves to be protected 44 www.honeywellsafety.com Honeywell Safety Products Eye, Face, Head and Welding Protection Every year, thousands of people suffer eye accidents in their workplace. 90% of these WHAT TYPE OF PROTECTION accidents can be avoided if suitable eye, face, head and welding protection is used. SHOULD YOU CHOOSE? Honeywell protective Eye, Face, Head and Welding Protection is designed not only to fulfil the primary function of effective protection, but also to make the products easy to wear, comfortable and suitable for every user. SAFETY SPECTACLES Protection for the eyes against: We realize that keeping people safe begins with a commitment to exceeding safety • low energy impacts (mechanical resistance standards an embracing change to create a Culture of Safety. We are about inspiring for an impact of up to 45 m/s). safety in the minds of workers everywhere. • harmful rays: Ultraviolet (UV) / Infrared (IR). GOGGLES Protection for the eyes against: • medium energy impacts (mechanical resistance for an impact of up to 120 m/s). • the risk of intrusion by dust, fine particles or Advanced coating technology from Honeywell p. 48 harmful chemical products (liquids, sprays, gas). • the risks from molten metal projections. Lens tint selector p. 49 • harmful rays (UV / IR). Safety spectacles - Choose your Need! p. 50 FACE SHIELDS Protection for the eyes and face against: I Adjust for me! p. 50 • medium and high energy impacts from sparks or solid bodies, plus projections (liquids, molten I Put it on & Go! p. 62 metals) that can cause generalised facial injuries. I My speciality applications p. 69 • hazards from electric arc discharges caused by short-circuits. • harmful rays (UV / IR). Safety spectacles with corrective lenses p. 70 Goggles p. 81 Face shields p. 87 Welding protection p. 95 Laser protection p. 100 Head protection p. 104 Warning! Honeywell equipment should only be used in conjunction with the manufacturer’s instructions. Failure to follow such instructions could result in serious injury including diminution or loss of vision. www.honeywellsafety.com 45 lead them to safety Honeywell can help. Honeywell Safety Products has the broadest portfolio of leading safety solutions in the marketplace today. Our core mission is to help safety managers build an enduring culture of safety that minimizes injuries and maintains a more protective and productive workplace. Partner with Honeywell to discover new ways to lead them to safety. Visit our website today. www.honeywellsafety.com/culture ©2012 Honeywell International Inc. All rights reserved. HONE120500171_Safety_210x297_UK.indd 1 04/09/12 15:14 Eye, Face, Head & Welding lead them to safety Safety Eyewear Choice Pillars We Offer A Wide Range of Product Types for All Levels of Work & Applications New Introducing “3 Choice Pillars” to help you Select the Right Eyewear Solution My Adjust Put it on speciality for me! and Go! applications! • Adjustability of Parts such as • Simplicity • Safety Prescription Solutions temples, nose, pantascopic • Basic “Value” Pricing range • Laser Protection Honeywell can help. adjustments etc. • Several Styles & Models • Welding Protection Honeywell Safety Products has the broadest portfolio of leading safety solutions • Comfort Focus to choose from in the marketplace today. Our core mission is to help safety managers build an • Blue-Tooth integrated eyewear enduring culture of safety that minimizes injuries and maintains a more protective • Wide range of Lens Coatings • No Moving Parts or and productive workplace. Partner with Honeywell to discover new ways to lead • Wide range of Lens Tints Adjustments to be made them to safety. Visit our website today. www.honeywellsafety.com/culture ©2012 Honeywell International Inc. All rights reserved. www.honeywellsafety.com 47 HONE120500171_Safety_210x297_UK.indd 1 04/09/12 15:14 Eye, Face, Head & Welding Advanced coating technology from Honeywell Honeywell is contributing to the creation of a safety culture in the workplace by offering resistant, high-performance eye protection that can be worn with total confidence. Years of research and technical development give us the ability to design high-performance products that deliver increased protection. These products are supplied with the best coatings to resist the most demanding conditions, special lens tints for every task to optimise visual acuity and an impact resistance performance that exceeds current standards. OUR OBJECTIVE IS SIMPLE: to inspire safety consciousness amongst the workforce, whatever the environment. Advanced lens coating technology Whether the problem is one of fogging on the inside of the lens or external scratching, Honeywell lens coatings provide a solution suited to almost every work environment. SUPRA-DURA® ANTI-SCRATCH COATINGS In environments exposed to high quantities of particles where scratched lenses pose a major problem, our new, advanced Supra-Dura® anti-scratch (K) coating has a lifespan 5 times* longer than most anti-scratch coatings currently available on New the market. DURA-STREME® Fogban/ANTI-SCRATCH COATINGS ® Dura-streme technology offers the industry-leading advantages of our anti-scratch and Fogban coatings on one single lens: New the Honeywell anti-scratch (K) coating protects the external surface of the lens by ensuring resistance to chemical products and scratches, whilst the Honeywell Fogban coating on the inside (N) maintains visibility in environments where heat, humidity and physical stresses form an integral part of the work. The internal Fogban coating The external offers excellent Fogban anti-scratch coating protection. increases the lens’ lifespan by up to 3 times*. READY FOR ANY CONDITION The Adaptec 4A+ lens coating meets (K & N) on both sides of lens and ensures excellent Fogban, anti-static and scratch- New resistant properties. HONEYWELL ANTI-SCRATCH COATING Our anti-scratch coating remains one of the most resistant anti-scratch coatings in the world. The coating is bonded permanently to the lens and will not wear off, even after repeated cleaning, and provides increased resistance to scratches and chemical products. HONEYWELL Fogban COATING Our Fogban coating prevents fogging to maintain clear vision in conditions of extreme humidity and extreme temperatures. This coating is bonded permanently to the lens and combines two functions. When the lens is exposed to humidity or mist, the coating’s hydrophilic properties absorb then release the humidity from the lens. Should the lens reach saturation point, the hydrophobic properties take over and eject the humidity from the lens. *Comparative lens lifetime test carried out using the Bayer abrasion test method. Results may vary depending on the environment and use. 48 www.honeywellsafety.com Eye, Face, Head & Welding Lens tint and marking selector Honeywell offers a vast range of lens tint options to suit nearly every task or trade and a wide array of applications. Honeywell’s SCT (Spectrum Control Technology®) lens tints use unique dyes that absorb specific light wavelengths. By filtering out particular wavelengths, these tints provide functional assistance for specific visual tasks, for example, in low light conditions, under halogen or fluorescent lighting, in strong sunlight or in proximity to a source of intense heat or even torchwelding, brazing and cutting. TINT SELECTOR (All Honeywell lenses offers over 99.9% protection Clear Cappuccino Yellow HDL Grey TSR Blue mirror Silver mirror Silver I/O IR3 IR5 against UVA and UVB) VLT: Visible Light Transmission 92% 27% 87% 22% 23% 12% 45% 14% 2% UV filter > 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 characteristics For indoor use where eye protection is required against the more usual risks (e.g., impacts) For outdoor use where sunlight and dazzle may cause eye fatigue Provides high visibility and good contrast in low light conditions Applications High performance lenses for indoor and outdoor use Welding SAFETY EYEWEAR MARKINGS: HOW TO IDENTIFY APPLICATIONS AND PERFORMANCE FRAME MARKING* LENS MARKINGS B-D 166 349 BT 2C-1.2 B-D 1 BT Manufacturer’s identifier Mechanical resistance Filter performance and area F: impact: 45 m/s of application Reference standard B: impact: 120 m/s EN 166: standard T: resistance guaranteed between Code (area of application) Mechanical resistance EN 169: safety for welding -5 and 55°C 2 or 3: UV filter F: impact: 45 m/s tasks 4: IR filter B: impact: 120 m/s 5 or 6: sunlight filter T: resistance guaranteed EN 170: protection against Specific areas of UV rays application No n°: welding filter between -5 and 55°C EN 171: protection against 3: liquids (drips/splashes) IR rays 4: large dust particles Colour perception Optical class EN 172: industrial solar filters 5: gas and fine dust particles C: colour perception unchanged 1: no optical distortion 8: short circuit electric arc (permanent wear 9: hot solids and molten metals Safety class authorised) 1.2 to 6: level of filtering of visible light Manufacturer’s identifier *New Honeywell models have a manufacturer’s identifier: HON www.honeywellsafety.com 49 Eye, Face, Head & Welding Adjust for me! Honeywell Adaptec: One style. Three sizes. Personalised adjustment & performance. HONEYWELL ADAPTEC FEATURES & BENEFITS • Adjustable nose bridge to centre the eye position to reduce eye fatigue. • Automatic adjustment of the nose pads means additional comfort for the wearer. • Adjustable lens angle for increased safety and reduced fogging. • Precise adjustment of the temples to give the right fit and ensure comfort when worn for long periods. – 15º 0º +15º Honeywell ref. North ref. Frame colour Lens tint Lens and frame marking CLEAR NARROW FIT Ideal for most indoor applications. 10 307 40 T5901NBL Blue/Grey Clear 2C-1,2 EN166 1 FT H KN CE 10 307 43 T5901NBLBM Blue/Grey Blue mirror 2C-3 / 5-3,1 EN166 1 FT H KN CE 10 307 45 T5901NBLS Blue/Grey Smoked 2C-3 / 5-3,1 EN166 1 FT H KN CE 10 307 39 T5901NTK Red/Black Clear 2C-1,2 EN166 1 FT H KN CE 10 307 38 T5901NTKA Red/Black Amber 2C-1,2 EN166 1 FT H KN CE SMOKED 10 307 37 T5901NTKG5 Red/Black IR 5.0 5 EN166 1 FT H CE Reduces sunlight and outdoor glare to the minimum.
Load more

Recommended publications
  • Eye Safety Tool Box Talk
    Instructor : Use the guidance questions on the left to promote discussion of the eye safety issues at your work site. You should include those questions marked with *** and a selection of the remaining questions that apply to your work site. The limited information on the right is designed to provide the background information needed in each section of the toolbox talk. It may be supplemented with other materials and samples of the eye protection available at your work site. This discussion is expected to take ~15-30 minutes or more. Involve your workers in the discussion. Instructor Questions and Discussion Highlights Guidance ***How many work-related eye Key Points injuries are there each day? • ~2000 eye injuries occur everyday at work in the US Go over Key Points • Construction workers have one of the highest eye injury rates • Particles of dust, metal, wood, slag, drywall, cement etc. are the most common Ask if anyone has ever had an eye source of eye injury to carpenters injury or knows someone who did • Even “minor” eye injuries can cause life-long vision problems and suffering–a simple scratch from sawdust, cement, or drywall can cause corneal erosion that is Ask them to describe the injury event recurrently painful • Hammering on metal which gives off metal slivers and the rebounding of the Ask for ideas about how it could have ordinary nail are two of the most common causes of vision loss in construction been avoided workers ***What are the eye hazards at your Potential Eye Hazard Examples site? • Hammering, grinding, sanding,
    [Show full text]
  • Personal Protective Equipment (PPE) Guide
    Personal Protective Equipment (PPE) Guide Volume 1: General PPE February 2003 F417-207-000 This guide is designed to be used by supervisors, lead workers, managers, employers, and anyone responsible for the safety and health of employees. Employees are also encouraged to use information in this guide to analyze their own jobs, be aware of work place hazards, and take active responsibility for their own safety. Photos and graphic illustrations contained within this document were provided courtesy of the Occupational Safety and Health Administration (OSHA), Oregon OSHA, United States Coast Guard, EnviroWin Safety, Microsoft Clip Gallery (Online), and the Washington State Department of Labor and Industries. TABLE OF CONTENTS (If viewing this pdf document on the computer, you can place the cursor over the section headings below until a hand appears and then click. You can also use the Adobe Acrobat Navigation Pane to jump directly to the sections.) How To Use This Guide.......................................................................................... 4 A. Introduction.........................................................................................6 B. What you are required to do ..............................................................8 1. Do a Hazard Assessment for PPE and document it ........................................... 8 2. Select and provide appropriate PPE to your employees................................... 10 3. Provide training to your employees and document it ........................................ 11
    [Show full text]
  • Eye Protection
    eye protection Eye Protection Synonymous with Design, Comfort, Protection and Reliability, 7/2+Safe® is known for high quality safety eyewear as well as safety prescription eyewear. Powered by state-of-the-art design and ergonomics, and competent manufacturing partners, 7/2+Safe® eyewear are guaranteed for superior protection and comfort. In addition to strict internal quality control, all 7/2+Safe® eyewear cOMPLYWITH53!!.3): , SingaporE33 standards, and are tested to Class 1 Optical Quality for Undistorted Vision. 7/2+Safe® utilizes Hard Coated (HC) polycarbonate lenses with 56Protection for maximum scratch resistance and impact protection. Indicated models come with Anti-Fog (AF) for enhanced clarity. Selected models are tested tO%.AND!3.:3STANDArds. ASIAN FIT All WORKSafe® eye protection have: They comply with: s 3Cratch-resistant hard coating (HC) s 53!!.3): OR s 56Protection s SingaporE33OR s Anti-fog coating (AF) for indicated s %.for indicated models models ANSI Z87.1-2010 Standard 4HE!MERICAN.ATIONAL3TANDARDS)NSTITUTE!.3) HASAPPROVEDANDISSUEDTHENEW!.3))3%!: !MERICAN.ATIONAL3TANDARDFOR /CCUPATIONALAND%DUCATIONAL%YEAND&ACE0ROTECTION!.3): 4HISSTANDARDWENTINTOEFFECT!PRIL ANDUPDATESTHE VERSION7HILETHESCOPEOFTHESTANDARDREMAINSMOSTLYUNCHANGED THEREAREANUMBEROFMODIFICATIONSTHATHAVESIGNIFICANTIMPACT The following outlines these changes and how they impact eye protection and the methods companies use to select safety products. Important Changes .EW: STANDARDNOWFOCUSESONHAZARDSINSTEADOFPROTECTORTYPE The objective is to encourage safety personnel and users to evaluate and identify specific hazards in their workplace such as Impact, Optical Radiation, Splash, Dust, and Fine Dust Particles. In the revised standard, selection of the appropriate eye and face protective devices should be based on consideration of the hazard. Impact & Coverage sImpact ratings: .EW: CLASSIFIESIMPACTPROTECTIONINTO 1. Non-Impact Rated - compliance to the impact requirements under “General Requirements”.
    [Show full text]
  • 3-D Vision for Welder Training and Production Welding
    SUBCONTRACT NUMBER 2017-420 Panel Project Final Quarterly Report #4 for 3-D Vision for Welder Training and Production Welding Reporting Period: 9/1/17 – 12/1/17 Technical Progress/Major Accomplishments The team completed the second, final testing round o In-yard testing with experienced welders indicated that stereo was promising for blind / mirror welding o The in-school testing showed that the weld-by-video was very popular with students, but stereo was not judged to give any substantive training benefit; stereo seemed irrelevant. Dr. Foster presented his results at the NSRP joint panel meeting at Quonset RI, Sept 13. Details The team completed the second field testing round Because phase 1 found that students couldn’t appreciate the difference of stereo, the second testing phase focused on experienced welders. Mirror-welding tests were designed to differentiate the benefit of stereo (3D) over mono cameras by experienced welders. Tests were designed and executed by Dr. Foster of ODU as a subcontractor. Testing was done at 3 locations: Newport News Shipbuilding Austal Maritime Training Center Thomas Nelson Workforce Development Center Experienced welders successfully used the system to weld in blind spots where they would normally need a mirror to see. The experienced welders could effectively use the improvement of the video-view without worrying about how to weld. They liked the stereo over mono for general quality, but not specifically for depth perception. Stereo gives an improved look that is pleasing to the eye and brain. It just seems ‘better.’ Although the camera did provide depth perception, it remained awkward for the welders to get their hands into the proper position before the weld.
    [Show full text]
  • PPE in Laboratories 4
    North Carolina Department of Agriculture and Consumer Services Personal Protective Equipment Policy and Program Procedures Compliance Guide for OSHA Standards 1910.132, .133, .135, .136, and .138 1. Introduction 2. Responsibilities 1. Supervisors 2. Employees 3. Office of Health and Safety 3. Program Components 1. Hazard Assessment and Equipment Selection 2. Protective Devices 1. Eye and Face Protection 2. Head Protection 3. Foot Protection 4. Hand Protection 3. Selection and Use of PPE in Laboratories 4. Cleaning and Maintenance 5. Training 6. Recordkeeping References Appendix A General Guidelines for Choosing Personal Protective Equipment Appendix B Hazard Assessment Certification Form Personal Protective Equipment Program 1.0 Introduction The objective of the Personal Protective Equipment (PPE) Program is to protect employees from the risk of injury by creating a barrier against workplace hazards. Personal protective equipment is not a substitute for good engineering, administrative controls or good work practices, but should be used in conjunction with these controls to ensure the safety and health of employees. Personal protective equipment will be provided, used, and maintained when it has been determined that its use is required and that such use will lessen the likelihood of occupational injury and/or illness. This program addresses eye, face, head, foot, and hand protection. Separate programs exist for respiratory and hearing protection since the need for participation in these programs is established through industrial hygiene monitoring. Standards and procedures set forth in this policy shall be considered minimum requirements. Divisions may set more stringent standards for specific laboratories, sites or procedures with approval of the Department Safety Director.
    [Show full text]
  • Recent Discoveries in Personal Protective
    European Journal of Molecular & Clinical Medicine ISSN 2515-8260 Volume 07, Issue 01, 2020 RECENT DISCOVERIES IN PERSONAL PROTECTIVE EQUIPMENTS Anu Iswarya Jaisankar 1, Brundha M.P 2, Ezhilarasan.D3 1Department of Pathology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences [SIMATS], Saveetha University, Chennai - 600077, Tamilnadu. 2Associate Professor, Department of General Pathology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences [SIMATS], Saveetha University, Chennai – 600077 Tamilnadu. 3Associate Professor, Department of Pharmacology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences [SIMATS], Saveetha University, Chennai – 600077 Tamilnadu. [email protected] [email protected] [email protected] ABSTRACT: In the Human sphere of life, Protection is defined as any measure taken to guard or protect an object or a human against any kind of Physical, Chemical and Biological hazards. Personal protective equipments are the equipments that offer complete protection against these kinds of hazards.They are designed in such a way that they ensure one’s safety to the fullest. The hazards addressed by protective equipments include physical, electrical, heat, chemicals, Bio hazard and airborne particulate.They are routinely used by Health care Professionals for preliminary protection. They enhance Occupational safety and also impose a barrier between the user and the environment. A Tremendous number of personal protective equipments had been invented in the last two decades. This review article has studied more than 55 articles on Personal protective Equipments. The article discusses such equipments that are needed for self protection of mankind which includes Face protective, Eye protective, Head protective, Ear protective, Ballistic protective and Foot protective equipments.
    [Show full text]
  • Eye Protection
    4 EYEWEAR Eye Protection WHAT TYPE OF PROTECTION SHOULD YOU CHOOSE? Protecting yourself from MECHANICAL risks Protecting yourself from RADIATION risks INTRODUCTION Grinding work, particle projections, projections of Exposure of the eyes to high intensity, ultra violet, infra-red and Welcome to our eye metal filings or debris from tools. visible light sources, welding activities, steelworks, surgery. protection selection guide. Safety Safety Safety Safety Risks or Use Symbol* Standard Risks or Use Symbol* Standard This guide helps you select the most Spectacles Goggles Spectacles Goggles appropriate protective eyewear for you and your business. Low energy Ultraviolet EN166 F EN166 2 The guide includes a details of the risk types you may impact 45 m/s radiation EN170 Medium energy EN166 be subject to. It gives an overview of lens and frame B - EN166 Infra-red radiation 4 impact 120 m/s EN171 markings and covers the European safety standards to Solar radiation EN166 High energy 5 or 6 A - - EN166 for industrial use EN172 be aware of when choosing. Selection impact 190 m/s tables provide all of the information you EN175 EN166-169 for the hood The F, B or A symbol must be indicated on the lens and the frame to guarantee protection from Electric welding - - EN175 need to make a buying decision. mechanical risks. If the symbols differ, the symbol representing the lowest resistance is applied EN379 to the protection as a whole. for the filter EN379 EN166 Gas welding 1 .7/3/5 WHY BUY FROM RS? EN169 R1 to R5 Protecting yourself from ELECTRIC risks EN207 As industry experts we offer a wide range of protective Laser radiation LB1 to EN208 eyewear for many environments and risk types.
    [Show full text]
  • Illinois NIGP Listing
    Illinois NIGP Listing Class 001 Business Enterprise Program 00 Business Enterprise Program Class 005 ABRASIVES 00 ABRASIVES - All 05 Abrasive Equipment and Tools 14 Abrasives; Coated: Cloth; Fiber; Sandpaper; etc; 21 Abrasives; Sandblasting; Metal 28 Abrasives; Sandblasting (Other than Metal) 42 Abrasives; Solid: Wheels; Stones; etc; 56 Abrasives; Tumbling (Wheel) 63 Grinding and Polishing Compounds: Carborundum; Diamond; etc; (For Valve Grinding Compounds See Class 075) 70 Pumice Stone 75 Recycled Abrasives Products and Supplies 84 Steel Wool; Aluminum Wool; Copper Wool; and Lead Wool Class 010 ACOUSTICAL TILE; INSULATING MATERIALS; AND SUPPLIES 00 ACOUSTICAL TILE; INSULATING MATERIALS; AND SUPPLIES - All 05 Acoustical Tile; All Types (Including Recycled Types) 08 Acoustical Tile Accessories: Channels; Grids; Mounting Hardware; Rods; Runners; Suspension Brackets; Tees; Wall Angles; and Wires 09 Acoustical Tile Insulation 11 Adhesives and Cements; Acoustical Tile 14 Adhesives and Cements; Insulation 17 Aluminum Foil; etc; 30 Bands; Clips; and Wires (For Pipe Insulation) 38 Clips; Pins; etc; (For Duct Insulation) 41 Cork: Blocks; Boards; Sheets; etc; 45 Exterior Insulation and Finish Systems 53 Fiberglass: Batts; Blankets and Rolls 56 Foam Glass: Blocks; Sheets; etc; 57 Foam-in-Place Insulation: Phenolic; Urethane; etc; 59 Foam Plastics: Blocks; Boards; Sheets; etc; 62 Insulation; Interior 63 Insulation; Blown Type Tuesday, February 11, 2014 Page 1 of 306 Illinois NIGP Listing Class 010 ACOUSTICAL TILE; INSULATING MATERIALS; AND SUPPLIES
    [Show full text]
  • NIGP to UNSPSC Commodity Mapping 5-Digit NIGP Code NIGP Description UNSPSC Class Mapping UNSPSC Class Description 005-00 ABRASIV
    NIGP to UNSPSC Commodity Mapping 5-Digit NIGP NIGP Description UNSPSC Class Mapping UNSPSC Class Description Code 005-00 ABRASIVES 311915 Abrasives and abrasive media 005-05 Abrasive Equipment and Tools 311915 Abrasives and abrasive media 005-14 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 311915 Abrasives and abrasive media 005-21 Abrasives, Sandblasting, Metal 311915 Abrasives and abrasive media 005-28 Abrasives, Sandblasting (Other than Metal) 311915 Abrasives and abrasive media 005-42 Abrasives, Solid: Wheels, Stones, etc. 311916 Abrasive wheels 005-56 Abrasives, Tumbling (Wheel) 311915 Abrasives and abrasive media 005-63 Grinding and Polishing Compounds: Carborundum, Diamond, etc. 231315 Grinding and sanding and polishing equipment and supplies 005-70 Pumice Stone 111116 Stone 005-75 Recycled Abrasives Products and Supplies 311915 Abrasives and abrasive media 005-84 Steel Wool, Aluminum Wool, Copper Wool, and Lead Wool 311915 Abrasives and abrasive media 010-00 ACOUSTICAL TILE, INSULATING MATERIALS, AND SUPPLIES 301416 Specialty insulation 010-05 Acoustical Tile, All Types (Including Recycled Types) 301616 Ceiling materials 010-08 Acoustical Tile Accessories: Channels, Grids, Mounting Hardware, 301616 Ceiling materials 010-09 Acoustical Tile Insulation 301416 Specialty insulation 010-11 Adhesives and Cements, Acoustical Tile 301416 Specialty insulation 010-14 Adhesives and Cements, Insulation 301416 Specialty insulation 010-17 Aluminum Foil, etc. 301020 Foil 010-30 Bands, Clips, and Wires (For Pipe Insulation) 311623 Mounting hardware 010-38 Clips, Pins, etc. (For Duct Insulation) 301416 Specialty insulation 010-41 Cork: Blocks, Boards, Sheets, etc. 601240 Cork craft supplies and accessories 010-45 Exterior Insulation and Finish Systems 301521 Surface 010-53 Fiberglass: Batts, Blankets and Rolls 301415 Thermal insulation 010-56 Foam Glass: Blocks, Sheets, etc.
    [Show full text]
  • Worker Workbook
    WORKER Construction Safety & Injury Prevention Program WORKBOOK This material was produced under grant SH29640SH6 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government. TABLE OF CONTENTS INTRODUCTION 1 CONSTRUCTION SAFETY & INJURY PREVENTION PROGRAM 1 EVALUATIONS 2 MODULE 1-1: HAZARD IDENTIFICATION PLAN 3 ACTIVITY 1: GROUP DISCUSSION 3 ACTIVITY 2: IDENTIFYING HAZARDS: HIDDEN MESSAGES 3 MODULE 1-2: WORKPLACE SAFETY RULES & HAZARD CONTROL 4 ACTIVITY 1: WORKPLACE SAFETY RULES 4 ACTIVITY 2: WORKSITE ANALYSIS: SPOT THE HAZARDS 6 HANDOUT 1: JOB SAFETY ANALYSIS 7 HANDOUT 2: SAMPLE STANDARD OPERATING PROCEDURE (SOP) 8 MODULE 2-1: PERSONAL PROTECTIVE EQUIPMENT 9 QUIZ 1: PERSONAL PROTECTIVE EQUIPMENT 9 HANDOUT 1: NOISE LEVELS 11 GROUP ACTIVITY 1: PPE ASSESSMENT 12 MODULE 2-2: DISCIPLINARY POLICY & EMPLOYER RESPONSIBILITIES 13 EMPLOYER RESPONSIBILITY & DISCIPLINARY POLICY 13 MODULE 2-3 WORKER RIGHTS AND ANTI-RETALIATION 14 ACTIVITY 1: WORKER RIGHTS AND ANTI-RETALIATION 14 APPENDIX 1: ANSWERS 17 APPENDIX 2: OSHA HAZARDOUS MATERIALS 20 APPENDIX 3: OSHA PPE REQUIREMENTS 30 APPENDIX 5: OSHA SAFETY POSTER 33 APPENDIX 6: TIPS FOR FILING AN OSHA COMPLAINT 34 NOTES 35 INTRODUCTION Construction Safety & Injury Prevention Program The Construction Safety & Injury Prevention Program (CSIP) has been made possible by the Susan Harwood Training Grant Program, which supports training and education programs for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in their workplaces.
    [Show full text]
  • Commodity Codes
    Commodity Codes Commodity Co Commodity Code Title 005 Abrasives 005-05 Abrasive Equipment and Tools 005-14 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 005-21 Abrasives, Sandblasting, Metal 005-28 Abrasives, Sandblasting (other Than Metal) 005-42 Abrasives, Solid: Wheels, Stones, etc. 005-56 Abrasives, Tumbling (wheel) 005-63 Grinding and Polishing Compounds: Carborundum, Diamond, etc. (for Valve Grinding Compounds See Class 075) 005-70 Pumice Stone 005-75 Recycled Abrasives Products and Supplies 005-84 Steel Wool, Aluminum Wool, Copper Wool, and Lead Wool 010 Acoustical Tile, Insulating Materials, and Supplies 010-05 Acoustical Tile, All Types (including Recycled Types) 010-08 Acoustical Tile Accessories: Channels, Grids, Mounting Hardware, Rods, Runners, Suspension Brackets, Tees, Wall Angles, and Wires 010-09 Acoustical Tile Insulation 010-11 Adhesives and Cements, Acoustical Tile 010-14 Adhesives and Cements, Insulation 010-17 Aluminum Foil, etc. 010-30 Bands, Clips, and Wires (for Pipe Insulation) 010-38 Clips, Pins, etc. (for Duct Insulation) 010-41 Cork: Blocks, Boards, Sheets, etc. 010-45 Exterior Insulation and Finish Systems 010-53 Fiberglass: Batts, Blankets and Rolls Page 1 of 344 Commodity Co Commodity Code Title 010-56 Foam Glass: Blocks, Sheets, etc. 010-57 Foam-in-place Insulation: Phenolic, Urethane, etc. 010-59 Foam Plastics: Blocks, Boards, Sheets, etc. 010-62 Insulation, Interior 010-63 Insulation, Blown Type 010-64 Insulation, Loose Fill 010-65 Jacketing (for Insulation): Canvas, Osnaburg, etc. 010-70 Magnesia: Blocks, Sheets, etc. 010-72 Mineral Wool: Blankets, Blocks, Boards 010-75 Paints, Primers, Sealers, etc. (for Insulation) 010-76 Paper Type Insulation Material (cellulose, Etc.) 010-78 Pipe and Tubing Insulation, All Types 010-81 Preformed Insulation, All Types (for Ells, Tees, Valves, Etc.) 010-83 Recycled Insulation Materials and Supplies, All Types 010-84 Rubber Insulation 015 Addressing, Copying, Mimeograph, and Spirit Duplicating Machine Supplies: Chemicals, Inks, Paper, etc.
    [Show full text]
  • 2015 Product Catalog
    EYE, HEAD & FACE PROTECTION Certified to ISO 9001:2008 Protective Eyewear 4 Sellstrom Manufacturing Company has been a leader in protecting the world's Equipment & Lens Cleaning Stations 14 workforce since 1923. Maintaining that leadership position necessarily entails Germicidal Monitor Cabinet 15 continuous attention to improving processes in all areas of the Company. Spill Control Station 15 Sellstrom developed a quality management system, to ensure that Protective Goggles 16 manufacturing procedures and product quality were constantly advancing. Protective Mini Goggles 19 Family Owned for Over 90 Years Meeting the requirements for ISO 9001:2008 certification—which Sellstrom Protective ArcFlash Faceshields 20 achieved as a continuation of ISO 9001:2000 in 2000—was largely a matter of Protective Faceshields 22 Sellstrom Manufacturing Company, located in Schaumburg, Illinois, has been training employees in ISO procedures and modifying the existing system to Hard Hats 28 a family owned leading manufacture r of personal safety equipment for conform to the most current ISO standards. 90 years. The original company, established in 1923 as Excell Sales Company, Adapters & Accessories 29 was located on North Clark Street in Chicago. G.E. Sellstrom (shown right) The ISO 9001:2008 certification from ABS Quality Evaluations (an and his wife, Ellen, were the founders. In the beginning, the principal product ISO registrar) serves as an impartial appraisal of Sellstrom's GENERAL SAFETY manufactured was a green "eyeshade" that reduced glare both indoors quality management system. This achievement affirms Hearing Protection 30 and outdoors. Early customers were barbers, office workers and picnickers. Sellstrom's conformance with the standards set forth by Knee Pads 30 the International Organization for Standardization, and Over the years, other products followed and the Company began to manufacture a full line of sunglasses, acknowledges the Sellstrom commitment to meeting the needs motorcycle goggles and lenses for taillights, flashlights and more.
    [Show full text]