Front view LED indicator

QUICK SETUP GUIDE

Memory Card microSD, microSDXC Reader Insert label side up. NS-DCR30D3K / NS-DCR30D3K-C SD card Insert label side up. PACKAGE CONTENTS • USB 3.0 multi-format reader • USB 3.0 cable CompactFlash (CF) card • Quick Setup Guide Insert label side up.

SYSTEM REQUIREMENTS Back view • Windows® 10, Windows® 8.1, Windows® 8, Windows® 7, ®, Mac OS 9.0 or higher, or Kernal 2.4.1 or above

FEATURES • Supports USB 3.0 and below • Multi-port and multi-driver letter display USB cable port • Plug & Play • Works with the following card formats: Micro SD/T-FLASH/Micro SDXC/Micro SDHC, SD/SDHC/SDXC/ Mini-SD, CompactFlash (CF) type I Caution: All cards must be inserted into the label side up. Failure to do so could result in damage to the memory card or the card reader. Do not force a memory card into the card reader. Before using your new product, please read these instructions to prevent any damage. CONNECTING THE CARD READER 5 Do not remove your card from the card reader until the data LED Plug one end of a USB cable into the USB port of the card reader and stops blinking and the name of your card disappears from the Finder the other end into an available USB port on your . Your window. computer loads the drivers automatically. SPECIFICATIONS USING THE CARD READER • Dimensions: 2.87 × 1.98 × .68 in. (7.3 × 5.05 × 1.75 cm) Cautions: • Transmission port: USB 3.0 • Insert a card, label side up, into the appropriate slot. Failure to do so may result • Transmission rate: 5.0 Gbps (MAX) in damage to your card and/or card reader. • Operating temperature: 32~122°F (0~50°C) • Do not remove memory cards while the blue or green data LED on the reader • Operating humidity: 20% RH ~ 85% RH is flashing. Doing so may lead to loss of data or damage to your memory card. • This card reader will support inserting both microSD, SD, and CompactFlash cards at the same time. TROUBLESHOOTING The blue LED lights when you connect the card reader to a USB port on For troubleshooting help, call 1-877-467-4289 (U.S. and Canada) or your computer. It also lights when you insert a memory card and blinks 01-800-926-3000 (Mexico) when data is being read or written. To access a memory card using Windows: LEGAL NOTICES 1 Insert a card, label side up, into the appropriate slot. The data LED FCC Information lights. This device complies with part 15 of the FCC Rules. Operation is subject to the 2 Click Start, then click My Computer/Computer. Double-click the drive following two conditions: (1) This device may not cause harmful interference, letter to see its contents. and (2) this device must accept any interference received, including interference 3 Use normal Windows procedures to open, copy, paste, and delete files. that may cause undesired operation. ICES-003 statement 4 Right-click the name of your card and select Eject when you are CAN ICES‐3 (B)/NMB‐3(B) finished. 5 Do not remove your card from the card reader until the data LED stops ONE-YEAR LIMITED WARRANTY blinking and the name of your card disappears from the window. Visit www.insigniaproducts.com for details. To access a memory card using Mac OS 9.0 or higher: 1 Insert a card, label side up, into the appropriate slot. The data LED lights. CONTACT INSIGNIA: 2 Open the Finder window, then click your card’s name in the left For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) menu to view its contents. www.insigniaproducts.com 3 Use normal Mac procedures to open, copy, paste, and delete files. 4 Right-click the name of your card and select Eject when you are INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC, finished. 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2017 Best Buy. All rights reserved. Made in China V2 ENGLISH 17-0584