L

Portable media

2. 3.5 mm AUX socket. Note: iPod shuffle may be connected via the 3. Rear media AV sockets. AUX socket. 4. Rear media USB/iPod socket. Note: On vehicles fitted with rear seat entertainment, additional Audio/Visual sockets Do not plug non-audio devices into the are provided. This allows auxiliary equipment USB port. (such as a video game console) to be linked to Note: Use the cable supplied with your media the rear DVD screens. For installation device to connect to the USB socket. information, please refer to the manufacturer’s Note: A USB hub cannot be used to connect instructions. more than one USB device to the audio unit. Note: Devices connected to the USB ports will PLAYING A PORTABLE DEVICE be charged, but devices that are fully discharged If you are using a USB mass storage device or will not play. approved iPod, you can control playback using Note: In some cases if an iPhone is connected the Touch screen controls. via a USB cable for music and also to a If you are using a Bluetooth® device, you can Bluetooth wireless technology device for other control playback using the Touch screen, but phone functions, the audio will stream through some controls are unavailable. only the last connected port. For example if a If you are using any portable media device via Bluetooth wireless technology device is the last the AUX socket, then you must control playback connection made to the iPhone and the iPod from the device itself. lead is connected, no audio will be heard through the speakers via the iPod lead. Track Land Rover does not recommend the title and time information will still be shown on use of a Hard Disc Drive via the USB link the display. Audio output from the speakers will while the vehicle is in motion. These only be obtained if the user chooses audio mode devices are not designed for in car use on the Bluetooth wireless technology device. and may be damaged. To address this issue disconnect and reconnect your device's USB cable or open the iPod CONNECTING MULTIPLE DEVICES application on the iPhone, select the Bluetooth Do not plug non-audio devices into the icon and select Dock Connector on the pop up." USB port. When an iPod is connected, playback will You can connect multiple devices continue from the point at which it was last simultaneously to the portable media interface playing, provided the iPod battery is in a good and switch between them using the Touch state of charge. screen. Select iPod, USB, Bluetooth or AUX, to Note: Options such as Repeat and Mix relate switch between modes. to the device currently playing, they will not The device docked first will remain the active apply to any subsequent device. device until you choose to change. The 3.5mm AUX socket allows additional If, after changing to the newly-docked device, equipment (e.g. personal stereos MP3 player, you change back to the first device, play will hand-held navigation unit, etc.) to be connected resume at the point you left it (USB and iPod to the audio system. only).

156

Z3Vlc3Q7MjAyMS0xMC0wMVQyMDoyMTowNi44MjlaOzE3MC4xMDYuMzMuMjI7