DOCSLIB.ORG

Quick Start Guide with Workbook

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Quick Start Guide with Workbook Quick Start Guide with Workbook Version 2.0 0 | P a g e Table of Contents TABLE OF CONTENTS CONTACTING THE DEMICHELE GROUP 1 GETTING STARTED- WORKBOOK 2 Launching Glazier Studio .........................................................................................................................2 Navigating the Glazier Studio Program....................................................................................................3 Short Cut Keys .........................................................................................................................................7 ENTERING SYSTEM PARAMETERS 9 Exercise 1: Setting Parameters .................................................................................................................9 Exercise 2: Enter Company Information................................................................................................22 Exercise 3: Entering a Customer ............................................................................................................23 Exercise 4: Entering a Vendor................................................................................................................25 MENUS AND ICONS 27 Project Manager .....................................................................................................................................27 Graphic Editor........................................................................................................................................29 PROJECT 1 45 Exercise 5: Creating a new project........................................................................................................45 Exercise 6: Creating a Frameset for Project 1.......................................................................................46 Exercise 7: Frame 1............................................................................................................................................. 48 Exercise 8: Frame 2............................................................................................................................................. 49 Exercise 9: Frame 3............................................................................................................................................. 51 Exercise 10: Frame 4........................................................................................................................................... 52 Exercise 11: Frame 5........................................................................................................................................... 55 Exercise 12: Frame 6........................................................................................................................................... 57 Exercise 13: Frame 7........................................................................................................................................... 59 Exercise 14: Adding a Second Frameset to a Project:............................................................................60 Window Wall ..........................................................................................................................................61 Exercise 15: - Frame 1 ........................................................................................................................................ 61 Exercise 16: Frame 2........................................................................................................................................... 62 Glazier Studio Workbook ADVANCED EXERCISE – ALT BID 63 PROJECT 2 THERMAL STOREFRONT 66 Exercise 17: Project Data........................................................................................................................66 Exercise 18: Frame 1........................................................................................................................................... 69 Exercise 19: Frame 2........................................................................................................................................... 73 Exercise 20: Frame 3........................................................................................................................................... 76 Exercise 21: Frame 4........................................................................................................................................... 78 Exercise 22: Frame 5........................................................................................................................................... 79 CURTAIN WALL FRAME 81 Exercise 23: Curtain Wall Project Data .................................................................................................81 Exercise 24: Frame 1........................................................................................................................................... 82 Exercise 25: Frame 2........................................................................................................................................... 87 PROJECT 3 OUT OF SQUARE FRAMING 90 Exercise 26: Out of Square Project Data................................................................................................90 Exercise 27: Frame 1........................................................................................................................................... 91 Exercise 28: Frame 2........................................................................................................................................... 92 Exercise 29: Frame 3........................................................................................................................................... 93 Exercise 30: Frame 4........................................................................................................................................... 96 Exercise 31: Frame 5........................................................................................................................................... 99 Exercise 32: Frame 6..........................................................................................................................................100 CAD SETUP 102 CAD Setup and Configuration in Glazier Studio.................................................................................. 102 CAD Setup for Individual Programs .................................................................................................... 105 Creating Shop Drawings....................................................................................................................... 106 Glazier Studio Shop Drawings.............................................................................................................. 106 FastCAD32 to Version 7 ....................................................................................................................... 107 AutoCAD r14 to current....................................................................................................................... 110 IMPORTING DXF FILES INTO GLAZIER STUDIO 113 Contacting the DeMichele Group Business Hours: Monday through Friday 7:00am to 5:00pm AST Phone Numbers: Questions, Suggestions, Software Installation or Training Information: 480-985-4926 Fax: 480-985-3000 Email Us: General Information: [email protected] Chris Draper: [email protected] Mike English: [email protected] John Blasko: [email protected] Website: General: www.demichelegroup.com Glazier Studio Download: http://www.demichelegroup.com/GlazierStudio/download.html UPS Deliveries: DeMichele Group 6432 E McDowell Rd Mesa, AZ 85215 1 | P a g e Glazier Studio Workbook Getting Started- Workbook Launching Glazier Studio Starting Glazier Studio® To start Glazier Studio®, double left click on the Glazier Studio icon that was placed on your desktop during installation. OR Go to Start | Programs | DeMichele Group | Glazier Studio and left click on the Glazier Studio icon to start the program. Page | 2 Navigating the Glazier Studio Program The Main Menu has several options to choose from: Main Menu Projects All Projects: Displays current projects and allows you to select, edit general info, copy, rename, delete, import and save existing projects or create new projects. Alternate Bid: Allows a change to a previous bid recap without re-entering elevations. Databases Architects: Displays a list of Architects to select from for specific projects. CAD Details: Displays all catalog parts and keywords for finding CAD details. CAD Groups: Displays a list of metal systems and keywords to find with CAD Details to bring into an elevation or export to CAD. Catalog Parts: Displays current catalog parts to select, edit general info, copy, rename, delete, import and save existing parts or create new parts. Customers: Displays current customers and allows you to select, edit general info, copy, rename, delete, import and save existing customer information or create new customers. Door Frames: Displays a list of door frame templates to bring into an elevation and keywords. Door Groups: Displays current preconfigured doors and allows you to select, edit general info, copy, rename, delete, import and save existing door groups or create new preconfigured doors. Door Leafs: Displays a list of door leaf templates containing components and formulas used to fabricate the door. Only available if manufacturer allows for fabrication of door leafs. Metal Groups: Displays current preconfigured metal
Load more

Recommended publications
  • “The Science and Misteire of Glazing”: Thoughts on the Use of Marked Window Leads in Archaeological Analysis Timothy B
    Northeast Historical Archaeology Volume 45 Article 5 2016 “The science and misteire of glazing”: Thoughts on the Use of Marked Window Leads in Archaeological Analysis Timothy B. Riordan Follow this and additional works at: https://orb.binghamton.edu/neha Part of the Archaeological Anthropology Commons Recommended Citation Riordan, Timothy B. (2016) "“The cs ience and misteire of glazing”: Thoughts on the Use of Marked Window Leads in Archaeological Analysis," Northeast Historical Archaeology: Vol. 45 45, Article 5. Available at: https://orb.binghamton.edu/neha/vol45/iss1/5 This Article is brought to you for free and open access by The Open Repository @ Binghamton (The ORB). It has been accepted for inclusion in Northeast Historical Archaeology by an authorized editor of The Open Repository @ Binghamton (The ORB). For more information, please contact [email protected]. 120 Riordan/Marked Window Leads “The science and misteire of glazing”: Thoughts on the Use of Marked Window Leads in Archaeological Analysis Timothy B. Riordan Marked window leads have the potential to add significant insights to the understanding of archaeological sites. One of the few artifacts that commonly bears a date, window leads can provide a terminus post quem (TPQ) for the feature or level in which they are found. There have been attempts to go beyond their use as a TPQ, and, based on these artifacts, describe architectural sequences, structural changes, and do feature comparisons. While all of these have produced interesting results, their validity remains uncertain because of a lack of basic data on glaziers and vise makers. This study looks at the adoption of the glazier’s vise in England, identifies several of the men who made them, and investigates the history of several of the glaziers that used them.
    [Show full text]
  • Study Guide: Windows & Doors
    STUDY GUIDE: WINDOWS & DOORS Learning Objectives: • The features and benefi ts of the products you sell. • How to answer your customers’ product-related questions. • How to help your customer choose the right products. • How to increase transaction sizes by learning more about add-on sales and upselling techniques. Chapter 1: Windows Module 1: Window Construction Product Knowledge: • The Jamb is the frame around the top and side of a window. • The Sill is the piece that forms the bottom member of a window frame. It sheds water away from the window and wall and usually extends 1” to 1-1/2” from the wall. • The Frame is the entire jamb and sill assembly. • The Sash (or Vent) is the frame that immediately surrounds the glass, or the entire frame and glass assembly. • The Stops are fastened around the inside of the jamb to hold the sliding sash in place or provide a meeting surface for a swinging sash. • The Mullion is the connecting piece between two or more windows fastened together. • The Stool is the fl at trim piece at the bottom inside of the window. • The Apron is fastened along the interior wall beneath the stool, to hide the gap between the bottom of the window and the wall. • The Casing is the trim around the inside or outside of the window that hides the gap between the window and the surrounding wall. Window frame materials Next, let’s look at the basic types of materials used in the window frame. Wood • Wood sash are made with mortise-and-tenon joints and glued together.
    [Show full text]
  • SPOTLIGHT on Jimmy Blocker: Title Glazier & Welder for R.A
    JIMMY BLOCKER 2011 GLAZIER OF THE YEAR SPOTLIGHT On Jimmy Blocker: Title Glazier & Welder for R.A. Kennedy & Sons, Inc. (Aston, PA) Hometown Darby, PA Family Wife Bianca; kids Tajha (25), Ryna (23), and James (17) Awards Jimmy was recognized for his contributions to Local 252 as Apprentice of the Year in 1998 and Glazier of the Year in 2011. ABOUT JIMMY With over 22 years as a member of Local 252, Jimmy Blocker has Center’s new Patient Tower in Wynnewood, Pa., and Einstein had wide exposure to the glazing trade. He currently works for Medical Center Montgomery in Norristown, Pa. R.A. Kennedy & Sons, Inc., where he focuses predominantly on welding. He performs both glazing and welding work for projects Jimmy began his tenure as a glazier just after graduating from high in the healthcare, commercial, pharmaceutical, education, and school in North Philadelphia. A teacher advocated the trade and multi-family residential markets. the opportunities it offered. Jimmy now shares the same advice with young people he meets, including his 17-year-old son, who Jimmy currently works on is currently exploring options for his own future. the Holtec International campus rising in Camden, “It’s a great job to go for,” he says. “The guys you meet look out N.J. The 50-acre site for each other. We have a tight-knit family in this union.” along the Delaware River will include a new Jimmy doesn’t personally mind the heights or even the cold, but glass-clad Corporate the heat of the summer months sometimes takes its toll.
    [Show full text]
  • Award Three Contracts Each Per Specialized Trade
    BID RESULTS CK09MERCER2017-16 COUNTY FACILITIES AND SYSTEMS REPAIR FOR THE COUNTY OF MERCER AND THE MERCER COUNTY COOPERATIVE CONTRACT PURCHASING SYSTEM FOR A PERIOD OF ONE (1) YEAR WITH THE OPTION TO EXTEND TWO (2) YEARS BASED UPON THE INDEX RATE BID OPENING DATE: NOVEMBER 28,2017 AWARD MULTIPLE CONTRACTS FOR GENERAL TRADES BASED UPON GRAND TOTAL; AWARD THREE CONTRACTS EACH PER SPECIALIZED TRADE; SUBCONTRACTING PERMITTED; MUST HAVE LOW BID FOR GENERAL TRADES, ELECTRICIAN, LOW BID FOR ELECTRICIAN, PAINTER, LOW BID FOR GENERAL TRADES AND CEMENT LOW BIDDER FOR ELECTRICIAN AND HIGH LICENSES/CERTIFICATIONS IF APPLICABLE; ALL WORK PAINTER, CEMENT MASON AND PLUMBER/PIPEFITTER, ASBESTOS REMEDIATION, MASON. VOLTAGE ELECTRICIAN WARRANTED FOR ONE YEAR; MATERIALS: 10% MARKUP PLUMBER/PIPEFITTER. LEAD AND MOLD REMEDIATION UP ON MATERIALS; CONTRACT TERM: ONE (1) YEAR WITH THE OPTION TO EXTEND TWO (2) YEARS BASED UPON THE INDEX RATE CONTRACT TERM:JANUARY 1,2018 TO DECEMBER RES.2018-90 31,2018 NAME OF BIDDER SCOZZARI BUILDERS INC. RICASOLI & SANTIN CONTRACTING CO., INC. J.H WILLIAMS ENTERPRISES INC. GARY KUBIAK& SON ELECTRIC, INC. ADDRESS 1891 NORTH OLDEN AVENUE 4 FERNDALE AVENUE 231 HAINES DR 12 SHARON ROAD CITY, STATE, ZIP TRENTON, NJ 08638 MERCERVILLE, NJ 08619 MOORESTOWN , NJ 08057 ROBBINSVILLE, NJ 08691 CONTACT LEONARD J.SCOZZARI ROBERT HEARN JR. JAMES H. WILLIAMS GARY KUBIAK, JR. TELEPHONE 609 989 1221 609 588 9539 856 793 7114 609 259 8600 FAX 609 989 1262 609 588 6848 856 222 0071 609 259 8606 E-MAIL [email protected] [email protected] [email protected] [email protected] INSURANCE CERTIFICATE REQUIRED IF AWARDED REQUIRED IF AWARDED REQUIREDIF AWARDED REQUIREDIF AWARDED INSURANCE AND INDEMNIFICATION SIGNED AND DATED SIGNED AND DATED SIGNED AND DATED SIGNED AND DATED EXTEND TO COOP YES YES YES YES SCOZZARI BUILDERS INC.
    [Show full text]
  • Glazier Quick Start Guide
    Guide QDM-05-000037 Glazier Quick Start Guide Table of Contents Section 1: Introduction • Preface • Conflicting Technical Requirements • Assumptions • Quality Assurance • Delivery, Storage, and Handling Section 2: Dynamic Electrochromic Glass • Intro to Dynamic Electrochromic Glass • Glazing Materials, Products and Consumables • Diagrams of View Controls Section 3: Before You Begin Installation • Glazing Scope • Coordination • Installation Preparation Section 4: Approval of Glazier Shop Drawings • Review Process of Glazier Integration Strategy • Approval Process of Final Glazier Shop Drawings • Submission of Stamped Glazier Shop Drawings Section 5: Glazier Training • Online Training • Glazier Shop Training • On-Site Training Section 6: Installation • Holes and other penetrations • Grommet Applications and Requirements • Cable Management Section 7: Required IGU Testing Protocols • Work Breakdown Structure for testing IGUs • Cable Pathways & Cable Identification • Cable Management Rev 04 | Jun 2021 © 2021 View, Inc. All rights reserved. 1 Glazier Quick Start Guide Section 1: Introduction Preface The information in this installation guide is designed to assist our trade partner with the preparation, installation, commissioning and quality assurance checks for View, Inc. products. Our trade partner must ensure that all requirements below are met with equivalent or superior products, consumables, recommendations and standards. View, Inc. makes no guarantee as to the accuracy of information obtained from outside sources. View does not assume responsibility for workmanship. Rev 04 | Jun 2021 © 2021 View, Inc. All rights reserved. 2 Glazier Quick Start Guide Conflicting Technical Requirements Any conflicting terms, specifications or other written requirements must be brought to the attention of View’s Purchasing Department before installation begins. Assumptions This installation guide assumes the following: 1. Glazing Trade partner understands the layout and configuration requirements of the View provided interconnect drawings.
    [Show full text]
  • Program Outline
    PROGRAM OUTLINE Glazier To order additional copies please contact: Government Publications Services PO Box 9452 Stn Prov Govt Victoria, BC V8W 9V7 Phone: 250 387-6409 or Toll Free: 1 800 663-6105 Fax: 250 387-1120 www.publications.gov.bc.ca Copyright © 2008 Industry Training Authority This publication may not be reproduced in any form without permission by the Industry Training Authority Contact Director, Government Publications Services, Queen’s Printer at 250 356-6876 GLAZIER PROGRAM OUTLINE August, 2008 Developed By Industry Training Authority Province of British Columbia TABLE OF CONTENTS FOREWORD ................................................................................................................................. II ACKNOWLEDGEMENTS ........................................................................................................... III SECTION 1 OCCUPATION ANALYSIS CHART ........................................................................ 1 SECTION 2 GLAZIER PROGRAM OUTLINE ............................................................................ 4 SUGGESTED SCHEDULE OF TIME ALLOTMENT FOR GLAZIER ........................................... 6 PROGRAM OUTLINE FOR LEVEL 1 .......................................................................................... 8 LINE: A USE SAFE WORK PRACTICES ........................................................................... 9 LINE: B USE TOOLS AND EQUIPMENT ......................................................................... 19 LINE: C ORGANIZE WORK ............................................................................................
    [Show full text]
  • Thomas, John C. Exploring Careers in Construction: a Guide
    DOCOMBIT RESUME ED 098 414 95 CE 002 519 AUTHOR Thomas, John C. TITLE Exploring Careers in Construction: A Guide for Teachers. INSTITUTION Kentucky Univ., Lexington. Vocational Education Curriculum Development Center. SPONS AGENCY Bureau of Occupational and Adult Education (DREW /OE), Washington, D.C.; Kentucky State Dept. of Education, Frankfort. Bureau of Vocational Education. PUB DATE Jul 74 GRANT OEG-0-72-4683 NOTE 257p.; For other guides in the series,see CE 002 518-527, and CE 002 530 AVAILABLE FROM Curriculum Development Center, Room 151, Taylor Education Building, University of Kentucky, Lexington, Kentucky 40506 (Single copies only, $6.00) EDRS PRICE MF-$0.75 HC-S12.60 PLUS POSTAGE DESCRIPTORS Audiovisual Aids; Behavioral Objectives; Building Trades; *Career Education; *Construction Industry; *Curriculum Guides; Curriculum Planning; Employment OpportunIties; Instructional Materials; Integrated Curriculum; *Junior High Schools; Occupational Clusters; Occupaticnal Information; Resource Guides; *Resource Materials; Skilled Occupations; Teaching Guides; Unit Plan; Vocational Development IDENTIFIERS Career Exploration; Kentucky ABSTRACT One of 11 guides which can be used as aresource for junior high school teachers in implementing the explorationphase of career education, the guide allows students an opportunity to learn about the construction cluster and theirown personal aptitudes and attitudes. The first unit of the guide providesan overview of the contstruction industry, trends and outlooks, trainingopportunities, and organized labor. The remaining six units deal withsix job classifications within the construction industry: designand planning, carpentry, masonry, electricity, metal, andfinishing. The guide contains units on each of thes3areas along with suggestions for teaching them in the laboratory situation. Each unitspecifies a unit purpose and performance objectives and includes:(1) a brief description of unit content, (2) teaching-learning activities, (3) evaluation techniques, and (4) suggestedresources.
    [Show full text]
  • Worker Crushed by a Crate of Glass at a Residential Construction Site Case Report: 06NY001
    STATE OF NEW YORK DEPARTMENT OF HEALTH FATALITY ASSESSMENT AND CONTROL EVALUATION Worker Crushed by a Crate of Glass at a Residential Construction Site Case Report: 06NY001 SUMMARY On January 9, 2006, a 60 year-old male ironworker employed by an ornamental metal working company sustained fatal injuries when a crate of glass panes fell on him at a residential construction site. On the day of the incident, the company was contracted to install curtain walls (large double- paned thermal insulated glass) at the residence. Prior to installation, the workers staged the crates containing multiple plates of glass in such a way that when the crates were opened, the plates of glass would not fall out and the top glass sheet could be easily retrieved. The workers stood the crates on their sides, tilted them to a slight angle and supported the crates with either wooden bars (legs) or another crate of similar size and weight. When crates are staged in pairs, they form an upright triangle or “A” frame with the tops of the two crates touching and supporting each other. The incident happened while the workers were staging two crates (A and B) into an “A” frame. Crate A weighed approximately 1,859 pounds (Lbs.) and Crate B weighed approximately 1,943 Lbs. At the time of the incident, the foreman was standing at the north end of the two crates and a co-worker was at the south end. The victim was at the west side of the crates facing Crate B. The foreman directed the workers to push and tilt the crates towards each other.
    [Show full text]
  • 4335 Operation and Construction Service Building Maintenance and Operation Group Carpentry and Glazing Trades Series
    Code: 4335 Operation and Construction Service Building Maintenance and Operation Group Carpentry and Glazing Trades Series CLASS TITLE: Glazier CHARACTERISTICS OF THE CLASS: Under supervision, performs skilled work in the cutting, fitting and installation of glass in wooden and metal frames for windows, doors, skylights and other structures; and performs related duties as required. ESSENTIAL DUTIES: Reads blueprints, specifications and work orders to assess work required and to determine work methods to use for installing or replacing glass; selects type of glass such as insulated, tempered and laminated for use in various jobs; removes old and damaged glass and cleans surfaces for placement of new glass; ensures adequate supplies of tools, equipment and materials needed to complete jobs at work sites; uses hand and power tools to measure, cut, lift, fit and position glass into place; secures glass in sashes or frames using putty, bolts, rubber gaskets, glazing compound, metal clips or molding; spreads glazing compound around edges of molding, installs glass and trims excess material with a glazing knife; installs glass panels; maintains records of materials used; prepares work activity reports. RELATED DUTIES: Loads, transports and unloads equipment and supplies; cleans tools and work site after repairs. MINIMUM QUALIFICATIONS: Training and Experience. Successful completion of a US Department of Labor registered glazing apprenticeship training program and journeyman status, or an equivalent combination of training and experience. Knowledge, Abilities and Skill. Good knowledge of the principles, work methods and techniques of the glazing trade. Good knowledge of safety practices and procedures. Good knowledge of the tools, equipment and construction materials used to install glass.
    [Show full text]
  • Prevailing Wage Rates System Annual Adjusted July 1St Rates
    Details of Prevailing Wage Rates by Town Page 1 of7 Prevailing Wage Rates System Annual Adjusted July 1st Rates I>.9L WeJLSite 0 Wag!Lal1.d_W-9rkpJ~ce-.issuJ!_~0 Wage Rate~ 0 Building Rates - Hartford Building Rates - Hartford (effective July 1, 2009) Classification Hourly Rate Benefits 1a) Asbestos Worker/Insulator (Includes application of insulating materials, protective coverings, coatings, & finishes to all types of mechanical systems; application of firestopping material for wall openings & $34.21 19.81 penetrations in walls, floors, ceilings - Last updated 9/1/08 1b) AsbestosjToxic Waste Removal Laborers: Asbestos removal and encapsulation (except its removal from mechanical systems which are not to be scrapped), toxic waste removers, blasters. **See Laborers Group 7** 2) Boilermaker $33.79 34%19.48+16.9819.1214.788.96+ a 3a) Bricklayer, Cement Mason, Concrete Finisher (including caulking), Plasterers, Stone Masons$30.91$24.90$30.78$32.10 3b) Tile Setter 3c) Terrazzo Workers, Marble Setters - Last updated 10/1/08 3d) Tile, Marble & Terrazzo Finishers http://www2.ctdo1.state.ct.us/W ageRates Web/W ageRatesbyTown.aspx?Town= Hartford 10/13/2009 Details of Prevailing Wage Rates by Town Page 2 ot7 3e) Plasterer $32.10 19.48 ------LABORERS------ 4) Group 1: Laborers (common or general), carpenter tenders, wrecking laborers, fire watchers. $24.25 14.45 4a) Group 2: Mortar mixers, plaster tender, power buggy operators, powdermen, $24.50 14.45 fireproofer/mixer/nozzleman, fence erector. 4b) Group 3: Jackhammer operators, mason tender (brick)
    [Show full text]
  • Transcript of Proceedings in the Court of Appeals Of
    1 1 COURT OF APPEALS 2 STATE OF NEW YORK 3 ---------------------------------------- INTERNATIONAL UNION OF PAINTERS & 4 ALLIED TRADES, ET AL., 5 Respondents, 6 -against- NO. 101 7 NEW YORK STATE DEPARTMENT OF LABOR, ET AL., 8 Appellants. 9 ---------------------------------------- 10 20 Eagle Street Albany, New York 11 September 12, 2018 Before: 12 CHIEF JUDGE JANET DIFIORE 13 ASSOCIATE JUDGE JENNY RIVERA ASSOCIATE JUDGE LESLIE E. STEIN 14 ASSOCIATE JUDGE EUGENE M. FAHEY ASSOCIATE JUDGE MICHAEL J. GARCIA 15 ASSOCIATE JUDGE ROWAN D. WILSON ASSOCIATE JUDGE PAUL FEINMAN 16 17 Appearances: 18 OWEN W. DEMUTH, ASG NEW YORK STATE ATTORNEY GENERAL'S OFFICE 19 Attorney for Appellants The Capitol 20 Albany, NY 12224 21 JOSEPH L. GUZA, ESQ. LIPSITZ GREEN SCIME CAMBRIA, LLP 22 Attorney for Respondents 42 Delaware Avenue, Suite 120 23 Buffalo, NY 14202 24 Karen Schiffmiller 25 Official Court Transcriber 2 1 CHIEF JUDGE DIFIORE: The next appeal is appeal 2 number 101, International Union of Painters & Allied Trades 3 against New York State Department of Labor. 4 Good afternoon, counsel. 5 MR. DEMUTH: Good afternoon, Your Honors. May it 6 please the court, my name's Owen Demuth on behalf of the 7 appellant, Department of Labor. 8 May I please reserve three minutes for rebuttal? 9 CHIEF JUDGE DIFIORE: You may, sir. 10 MR. DEMUTH: Thank you very much. 11 Your Honors, this case is about the prevailing 12 wage law and the Department's statutory mandate, as the 13 steward of that law, to do two things. 14 JUDGE STEIN: Counsel, as - - - as a steward of 15 that law, the language, as I understand it from 220 - - - 16 MR.
    [Show full text]
  • A Window to Glazier Safety
    A Window to Glazier Safety Glaziers install glass in windows, skylights, storefronts, are informed of the potential hazards and are trained to and display cases, or on surfaces such as building fronts, understand the company’s policies for safe work practices. The interior walls, ceilings, and table tops. They sometimes also safety training should also include recommended personal manufacture, install, remove, transport, and recycle glass protective equipment and the proper use and care of power products. This publication highlights common risk factors for tools, chemicals, ladders, and other equipment or vehicles. glaziers and suggests ways to prevent an illness or injury due Many of the glazes, color additives, fluxes, and material mixes to glazier work. contain hazardous substances such as lead, mercury, arsenic, solvents, and heavy materials. Some raw materials may contain silica, asbestos, or other harmful substances. Check with an Industrial Hygienist to find out what respirators or other protective measures should be used when handling these substances. Personal Protective Equipment Personal protective equipment (PPE) may vary by jobsite and task, but should include sturdy: • Gloves to protect against cuts, punctures, burns, and injuries from solvents. • Wrist guards, gauntlets, and long sleeves to protect the wrists and arms against sharp or broken glass edges. Risk Factors • Safety glasses to protect eyes against sharp or broken There are a number of risk factors in the glazier industry that glass edges. account for most injuries, which include: • Safety boots/footwear to protect the foot from falling • Cuts. objects, punctures, or equipment. • Abrasions. • Kneepads to protect and cushion the knees when kneeling on hard surfaces.
    [Show full text]