Installation Instructions for Compactflash Memory Cards

Total Page：16

File Type：pdf, Size：1020Kb

Installation Instructions for CompactFlash Memory Cards Introduction CompactFlash/PCMCIA Adapter Transcend Information, Inc. manufactures 16MB, 32MB, 1. The CompactFlash/PCMCIA Adapter (Adapter) (Figure 1) 64MB, 128MB, 256MB and 512MB CompactFlash Memory can be used to transfer files to/from the CompactFlash Cards, a CompactFlash/PCMCIA Adapter, and a 3-in-1 USB Memory Card into a laptop or handheld computer via a Port Card Reader. The instructions on this page provide PCMCIA slot. Install a memory card into the Adapter general installation and handling information, which should be by aligning the notches on the card with those on the used in conjunction with the Owner’s Manuals for your Adapter, with the Transcend logo on the card visible. devices and computer system. 3-in-1 USB Port Card Reader Installation Procedures 1. The 3-in-1 USB Port Card Reader (Reader) (Figure 2) can be used with any notebook or desktop computer that has the Win 98, Win Me, Win 2000, or MAC O/S and a USB port. Once the device drivers have been installed according to the Reader’s Owner’s Manual, it can be used with a CompactFlash Memory Card as a fast, easy data exchange device, i.e. a small hard drive. 2. Insert the CompactFlash Memory Card into the slot of the Reader with the Transcend logo facing up. Slide the card into the Reader until it is completely seated. 3. The CompactFlash Memory Card and Reader can be Figure 1. CompactFlash/PCMCIA Adapter attached to the computer when the system is either on or off. Never remove a memory card while the Reader is transferring data. Laptops and Handheld PCs 1. The CompactFlash Memory Card and the Adapter can be used with numerous laptops and handheld PCs to store, copy, and move information like a small hard drive. 2. After the Adapter containing the memory card has been fully firmly inserted into the PCMCIA slot, in Win 98, Win Me, Win 2000, or Mac 8.6 & Up systems, when you double-click on "My Computer" you should see the card listed. Ordering Information Figure 2. 3-in-1 USB Port Card Reader Transcend P/N Memory Size Note TS0MPC5068 0MB 50-68 pin Adapter Digital Cameras TS0MFLRD 0MB 3-in-I Card Reader 1. The CompactFlash Memory Card can be inserted into TS16MFLASHCP 16MB numerous digital cameras to store pictures as digital TS32MFLASHCP 32MB data. Instructions for using a CompactFlash Memory TS64MFLASHCP 64MB Card with your digital camera are located in your TS128MFLASHCP 128MB camera's Owner’s Manual. Data stored on the CompactFlash Memory Card can be transferred to a TS256MFLASHCP 256MB computer system via use of the CompactFlash/PCMCIA TS512MFLASHCP 512MB Adapter (Adapter) or the 3-in-1 USB Port Card Reader (Reader). Transcend Information Inc. .

Copy Link

Recommended publications

LOGIK Portable Card Reader L0LCR10 Manual
2 Connecting the Power Adapter 1 Portable Card Reader Quick Start Guide SD Memory Card L0LCR10 MS Mini SD Card MS Duo MMC for purchasing your new Logik MS Pro *RS MMC Thank you M2 MS Pro Duo *MMC micro Portable Card Reader. Before connecting to your computer please 2 familarise yourself with this Quick Start Guide. T- Flash * RS MMC/ MMC Micro need to have a card adapter Unpacking 1 Step 1 Connect the USB cable to the USB port on your computer. Step 2 Insert your memory card into the Portable Card Reader Quick Start Guide correct slot carefully. L0LCR10 Thank you for purchasing your new Logik Portable Card Reader. Before connecting to your computer please familarise yourself with this Quick Start Guide. • Carefully insert the card the correct side up. 4 Port Hub Quick Start Guide P.N.: L0LCR10-002 • Do not force the card into the card reader. If items are missing, or damaged please contact • Only one card can be read at one time. Partmaster (UK only). Tel: 0844 800 3456 for assistance. To prevent any damage or data loss, please do not remove the memory card during reading and writing. Always follow the correct device removal procedure for your computer’s operating system. Visit Partmaster.co.uk This symbol on the product or in the today for the easiest instructions means that your electrical and way to buy electrical electronic equipment should be disposed spares and accessories. With over 1 million spares at the end of its life separately from your and accessories available we can deliver direct to household waste.
[Show full text]
A Place Compactflash
SanDisk—the first name in A place CompactFlash. TO STORE High-performance SanDisk CompactFlash memory cards are fast, reliable, and let you do so much more with the devices your BIG that use them. With a PC Card adapter, almost anything with MEMORY CARD a PC card slot can use SanDisk CompactFlash memory cards, too. One thing is certain: if it has a place for a CompactFlash memory card, you should fill it with a SanDisk CompactFlash card available in capacities up to 96MB. To increase your storage capacity, visit a retail outlet Actual size. ideas that carries premium-quality SanDisk CompactFlash memory To transfer data between your digital camera or handheld PC cards and get one today. See the bigger, better picture. and a desktop computer, you should also consider the SanDisk To get the best results with a digital camera, you’ll want to A place to store your big ideas. ImageMate™ External Drive. The parallel port version connects SanDisk’s 10 million picture guarantee™ use its highest image quality setting. High image quality is If you really depend on your handheld PC, you know how to your computer’s parallel port. The USB vesion connects to Want a CompactFlash memory card that will last a lifetime? desirable because the images can be used in a wider variety important it is to back up your data. SanDisk CompactFlash your computer’s available USB port. It acts like a regular Insist on SanDisk. We’re the only company that guarantees of applications. They look better in print. They can be memory cards are the ideal solution.
[Show full text]
Memory Card Reader • USB 3.0 Cable Compactflash (CF) Card • Quick Setup Guide Insert Label Side Up
Front view LED indicator QUICK SETUP GUIDE Memory Card microSD, microSDXC Reader Insert label side up. NS-DCR30D3K / NS-DCR30D3K-C SD card Insert label side up. PACKAGE CONTENTS • USB 3.0 multi-format memory card reader • USB 3.0 cable CompactFlash (CF) card • Quick Setup Guide Insert label side up. SYSTEM REQUIREMENTS Back view • Windows® 10, Windows® 8.1, Windows® 8, Windows® 7, Windows Vista®, Mac OS 9.0 or higher, or Linux Kernal 2.4.1 or above FEATURES • Supports USB 3.0 and below • Multi-port and multi-driver letter display USB cable port • Plug & Play • Works with the following card formats: Micro SD/T-FLASH/Micro SDXC/Micro SDHC, SD/SDHC/SDXC/ Mini-SD, CompactFlash (CF) type I Caution: All cards must be inserted into the card reader label side up. Failure to do so could result in damage to the memory card or the card reader. Do not force a memory card into the card reader. Before using your new product, please read these instructions to prevent any damage. CONNECTING THE CARD READER 5 Do not remove your card from the card reader until the data LED Plug one end of a USB cable into the USB port of the card reader and stops blinking and the name of your card disappears from the Finder the other end into an available USB port on your computer. Your window. computer loads the drivers automatically. SPECIFICATIONS USING THE CARD READER • Dimensions: 2.87 × 1.98 × .68 in. (7.3 × 5.05 × 1.75 cm) Cautions: • Transmission port: USB 3.0 • Insert a card, label side up, into the appropriate slot.
[Show full text]
The Only One Card Reader You Need
The Only One Card Reader You Need As the specifications of memory cards are updated day after day, users are looking for a card reader that accommodates all the memory cards as far as possible. This USB 2.0 Multi-Plus Card Reader/Writer supports almost all the memory cards available in the market. In addition to those commonly used memory cards, it also supports Mini-SD, RS-MMC and MS DUO without the need of an adapter. Most of all, it supports TransFlash card, the smallest memory card dedicating for some new mobile phones. Data can be exchanged between different slots. It is both convenient and cost-effective for users that have various memory cards used in digital cameras, digital music players, personal digital assistants, cell phones, and other portable devices. Specifications RU2B61 RU2B51 RU2B41 Model 26-in-1 Card Reader 25-in-1 Card Reader 24-in-1 Card Reader Interface USB 2.0 USB 2.0 USB 2.0 Memory Cards Supported Compact Flash I Compact Flash I Compact Flash I Compact Flash II Compact Flash II Compact Flash II CF Extreme III CF Extreme III CF Extreme III Slot 1 CF Ultra II CF Ultra II CF Ultra II Micro Drive (MD) Micro Drive (MD) Micro Drive (MD) Magicstor Magicstor Magicstor Secure Digital Card Secure Digital Card Secure Digital Card SD Ultra Card SD Ultra Card SD Ultra Card Mini SD Mini SD Mini SD Slot 2 MultiMedia Card MultiMedia Card MultiMedia Card MMC 4.0 MMC 4.0 MMC 4.0 RS-MMC RS-MMC RS-MMC RS-MMC 4.0 RS-MMC 4.0 RS-MMC 4.0 Memory Stick Memory Stick Memory Stick Memory Stick Pro Memory Stick Pro Memory Stick Pro Memory
[Show full text]
Multi-Card Reader/Writer Hi-Speed USB, 3.5" Bay Mount, 60-In-1 Part No.: 100915
Multi-Card Reader/Writer Hi-Speed USB, 3.5" Bay Mount, 60-in-1 Part No.: 100915 Converts an empty, unused PC bay into a digital content management center. The Manhattan Multi-Card Reader/Writer supports most card formats to easily download and transfer digital images and files from many of today’s popular flash memory cards. Compatible with up to 60 types of CompactFlash, Microdrive, Magicstor, Memory Stick, MagicGate, SecureDigital, Multimedia, XD and more, the Manhattan Multi-Card Reader/Writer quickly installs into a 3.5" bay. Convenience without the Media Device Access digital content without directly connecting the camera or other media devices to the computer. This convenient connection helps conserve battery power by eliminating the need to directly install a digital device to a desktop computer. A front-mount USB port expands power availability to recharge USB devices. Features: Convenient front-mount USB port Compatible with CompactFlash, Microdrive, Memory Stick, MagicGate, SecureDigital, Multimedia and XD Supports Automatic Card Detection and data transfer speeds up to 480 Mbps Eliminates need for direct connection of media device to save battery power Plug and play; hot-swappable — Windows and Mac compatible Three-Year Warranty Specifications: Standards and Certifications • USB 2.0 • USB 1.1 • CE • FCC • WEEE For more information on Manhattan products, consult your local dealer or visit www.manhattan-products.com. All names of products or services mentioned herein are trademarks or registered trademarks of their respective
[Show full text]
GFR209 Datasheet
GFR209 12-in-1 Pocket Card Reader/Writer IOGEAR's 12-in-1 Pocket Card Reader / Writer is an ideal solution for hi-speed, bi-directional image and data file transfer between your computer and multimedia devices. Images and data can be downloaded directly to your PC or Mac from your memory cards without using additional adapters. It works with 12 popular memory card formats such as SD, SDXC, microSD, microSDXC, Mini SD, MMC, Memory Stick, and MS Duo. With direct USB 2.0 high-speed file transfer (up to 480Mbps) from memory cards used in your cell phone, MP3 player, or digital camera, you can save time and conserve power on devices. It instantly transfers your slotMusic™ songs to your PC or Mac. No matter where you go, IOGEAR's 12-in-1 Pocket Card Reader / Writer helps you to easily bring your digital images and data with you. 3-Slot,(Max) Suport memory card SDHC (32GB) / Mini SDHC (4GB) / SDXC (64GB) / MMC(4GB) Micro SDXC (64GB) / M2 (16GB / need adapter) MS (16GB) Compliant with USB 2.0 specification Backward compatible with USB 1.1 specification Supports SDXC (Secure Digital High Capacity) and microSDXC cards Plug-n-Play, Hot swappable, and Hot pluggable up to 64GB Reads / Writes microSD / microSDXC / T-Flash, SD/SDXC, mini SD, Fast data transfer - up to 480 Mbps, between your cell phone / MMC, MMC Plus, RS-MMC, MMC Mobile, MS, MS Pro, MS Duo, MS smartphone / PDA and computers Pro Duo Requirements Package Contents For PC Users 1 x Card Reader/Writer • Windows XP, Windows Vista, Windows 7, Windows 8/8.1, 10 1 x Quick Start Guide • Available USB 2.0 port • Chrome Book • Linux®, Unix and other USB supported systems* *Additional drivers and support may be needed For MAC Users • Mac 8.6 or greater.
[Show full text]
Capturemovemanipulates
CAPTUREMOVEMANIPULATESTORE Flash Memory Cards from Simpletech CompactFlash Secure Digital MultiMediaCard RS-MMC miniSD Flash Memory Cards from SimpleTech Capture your digital photos, music, and files with SimpleTech high-speed flash FLASHMEMORYCARDS memory cards. CompactFlash CompactFlash (CF) flash memory cards are the most popular form factor of flash storage used in consumer devices today. CF cards are ideal storage solutions for digital cameras, MP3 players, PDAs, palmtops, and handheld PCs. Features • Low power consumption • Compatible with all CF devices • Hot Swappable • CFA and PCMCIA Compliant • Highest Capacity Available using IC TowerTM Chip Stacking Capacities 32MB-4GB Dimension 1.69" (w) x 1.43" (l) x 0.13" (t) Weight 11.4g Interface ATA True IDE Operating Temperature 0o - 70o C Power 3.3V or 5V Operation Warranty Lifetime Secure Digital Secure Digital (SD) flash memory cards are next generation memory devices that offer a combination of high storage capacity, fast data transfer rates, great flexibility and excellent security. Features • Copyrights protection function • SD and SPI interface supported • Nonvolatile solid-state storage • Mechanical write protect switch Capacities 32MB - 1GB Dimension 0.94" (w) x 1.26" (l) x 0.08" (t) Weight 1g Interface Secure Digital Mode SPI Mode miniSD card adapter can be use in SD card socket Operating Temperature 0o - 70o C Power 2.7V - 3.6V Warranty Lifetime MultiMediaCard MultiMediaCards (MMC) flash memory cards are highly integrated flash products which let you carry more music, images, data, and voice recordings. MMC cards are small but rugged. They are great for MP3 players, digital cameras, voice recorders, smart phones and digital camcorders.
[Show full text]
V7807RC Intel® Pentium® M VITA 31.1 Vmebus Single Board Computer
GE Fanuc Intelligent Platforms V7807RC Intel® Pentium® M VITA 31.1 VMEbus Single Board Computer Features High performance with VITA 31.1 compliance. Specifications ® ® The VME-7807RC is a highly flexible single board • Intel Pentium M @ 1.1 GHz, 1.4 GHz, Processor computer (SBC) that integrates Intel’s Pentium M or 1.8 GHz • Intel Pentium M @ 1.1 GHz, 1.4 GHz, or 1.8 GHz processor with up to 1.5 Gbyte DDR SDRAM and • Up to 2 Mbyte L2 cache • Favorable thermal characteristics Dual Gigabit Ethernet with a PCI-X, 66 MHz PMC • 2 Mbyte L2 cache (1.4 GHz and 1.8 GHz options), and • Up to 1.5 Gbyte DDR SDRAM expansion slot. Operating at up to 1.8 GHz, this 1 Mbyte (1.1 GHz option) • Up to 2 Gbyte bootable CompactFlash SBC provides high bandwidth and processing • 400 MHz system and memory bus power and is ideal for I/O intensive applications. • One PCI-X PMC expansion site SDRAM • 400 MHz system bus Utilizing Intel’s new highly integrated 6300ESB I/O • Maximum memory configuration of 1.5 Gbyte of DDR SDRAM with optional ECC support • 10/100 BaseTX Ethernet port on the front controller hub, the VME-7807RC offers four serial - 10/100/1000 Base Tx Ethernet port on the ports, four USB 2.0 ports, serial ATA, IDE, and up Compact Flash front (non-VITA 31.1 option) to 2 Gbyte of optional CompactFlash. This SBC • CompactFlash up to 2 Gbyte accessible through secondary IDE port • 2x Gigabit Ethernet with VITA 31.1 optional utilizes the Intel 855GME to provide SVGA and DVI-I graphics support.
[Show full text]
Multi-Card Reader/Writer USER MANUAL MODEL 700344/701419
MULTI-CARD READER/WRITER USER MANUAL MODEL 700344/701419 MAN-700344/701419-UM-0107-05 Thank you for purchasing the MANHATTAN® Multi-Card Reader/Writer, Model 700344 (black) or Model 701419 (beige). Convert any unused PC bay into a digital content management center that lets you access picture files from memory cards without directly connecting a camera or other media device to the computer. Follow the simple instructions in this user manual and enjoy the benefits of these convenient features: • Easily access cards and manage content with slot-to-slot read/write/copy capability • Compatible with CompactFlash, Microdrive, Memory Stick, MagicGate, SecureDigital and Multimedia • Supports automatic card detection, hot swapping and Plug and Play • Convenient front-mount USB port • Data transfer rates up to 480 Mbps • Lifetime Warranty 2 HARDWARE InsTALLATION 1. Turn off the power to your PC and remove the two side panels as shown at right. 2. Using the split ("Y") end of the internal cable, make the connections as shown to the Card Reader’s circuit board (near right) and the USB pins (far right). 3 3. Insert the Multi-Card Reader/Writer into the front panel of the PC. 4. Secure the Multi-Card Reader/Writer in place on both sides using the Side view enclosed mounting screws. 4 5. Connect the other end of the internal cable to the USB pins on the PC’s motherboard. NOTE: The white dot inside the red highlight box at right indicates the postion of Pin 1. 6. Replace the side panels on the PC. SOFTWARE InsTALLATION Windows XP: 1.
[Show full text]
1 Panasonic P2 AMA Plug-In Guide
1 Panasonic P2 AMA Plug-in Guide Avid supports Panasonic P2 media through Avid’s Media Access (AMA) method from an Avid editing application. Things You Should Know About the P2 AMA Plug-in • The P2 plug-in is supported with Avid Media Composer v4.0.5, Avid Symphony v4.0.5 and Avid NewsCutter v8.0.5 and higher. See www.avid.com/ama for specific information about AMA supported plug-ins. • The P2 AMA plug-in supports P2 compliant media that was created on an Edius editing system. • Avid does not support MultiCamera editing with P2 AMA clips. P2 Media Panasonic’s P2 equipment records DV, DVCPRO, and DVCPRO 50 media on compact, solid-state memory cards (P2 cards). Avid editing applications support editing of media directly from these memory cards, without the need to capture. You can also write your sequence back to the P2 card. The following are recognized as P2 cards by your Avid editing application: • Panasonic P2 cards in an attached reader or camera or in a laptop PC Card slot. • Synthetic P2 cards. A complete copy of a P2 card copied to the root of a drive or mounted as a drive, for example, by mapping to a drive letter. The P2 AMA plug-in should be installed on your system. To link P2 media through the AMA method, use Link to AMA Volumes. For more information, see “The Avid Media Access (AMA) Workflow” on page 8 and “Linking Media with AMA” on page 14. For specific P2 workflow steps, see “Workflow for Editing P2 Clips with AMA” on page 25.
[Show full text]
Memory Card Reader/Writer
Memory Card Reader/Writer USER MANUAL Thank you for purchasing a PROMASTER® Memory Card Reader/Writer. The PROMASTER® Memory Card Reader/Writer lets you access your pictures or other files from a memory card without the need to directly connect a camera or other media device to your computer. Follow the simple instructions in this user manual and enjoy the benefits of these convenient features: • Easily access media and manage content almost anywhere Supports automatic card detection and high speed data transfer Eliminates need for direct connection of media device to save battery power Windows and Mac compatible — hot swappable, Plug and Play INSTALLATION Using the included USB cable, connect the Reader/Writer to a USB port on your computer. Double-click on "My Computer" to confirm that a drive letter labeled Removable Disk appears. Check that the internal blue power LED lights confirming a proper connection. Insert your memory card in the reader slot to use the card reader function. Double-click on the Removable Disk drive letter to read or write desired files to or from your computer or storage card. OPERATIONS GUIDE OVERVIEW The read and write commands for memory cards are the same as those used for moving data to and from any other computer storage device, such as a USB drive or floppy disk. You simply plug the PROMASTER® Reader/Writer into any USB port of your PC or Mac and begin transferring information stored on flash media cards to your computer and back. OPERATING TIPS Using Compact Flash (CF I and II) & Microdrive Reader When inserting cards, the side with the holes should face the card slot on the PROMASTER® reader.
[Show full text]
View/Print Information About Compactflash Cards for Use With
TECH TIPS Preferred Flash Media Card for HAPPY machines There are 2 ways to transfer designs into the HCS Voyager machine: 1. Direct Cable Connection – Either USB or Serial (RS-232). The way to set up these connections can be found on another TechTip document. 2. Flash Memory Card – Flash memory cards work just like floppy disks, only much faster and with lots more storage space. HCS Voyager reads several kinds of flash-type memory cards: CompactFlash (illustrated below on this page), SecureDigital (SD), Memory Stick and SmartMedia. HCS Voyager does NOT support USB flash drives known generically as “jump drives”, “pen drives” or “thumb drives”. Of all the available types, we’ve illustrated the most popular one – and the most popular brand of that type below: CompactFlash. And as of this writing, the most successful brand has been SanDisk. About Compact Flash Cards The required hardware to use CompactFlash cards with your HAPPY machine is illustrated below. Note that prices may vary depending on retailer and market conditions. 1. Compact Flash card (required) – anwhere from $40 to $100 and on up, depending on how much memory you need. Even the smallest available (usually 128Mb) can hold hundreds of designs. The most popular brand, Sandisk, is shown. 2. PCMCIA Adapter for Compact Flash (required)– To fit into the reader slot of your HAPPY machine, the compactFlash card must be plugged into this adapter (this is the same type of sleeve for PCMCIA slots on many laptop PC’s.) Between $10 3. USB reader/writer for CompactFlash (option)– and $20.00 This is only necessary if your PC does not have a PCMCIA slot (many laptops have this type of slot) or does not have a CompactFlash reader.
[Show full text]