Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, Afternoon Session

Q1.

A. B.

C. D.

Q2.

A. B.

C. D.

Q3.

A. B.

C. D.

Q4.

A. B.

C. D.

Q5.

A. B.

C. D.

December 17, 2019 Page 1 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q6. ______is the synonym of "OBSTINATE".

A. Absent B. Willing

C. Accommodating D. Adamant

Q7. ______is the antonym of "FREEDOM".

A. Restriction B. Liberty

C. Independence D. Flexibility

Q8. Identify the meaning of the idiom "add fuel to the fire".

A. Bring an end to the quarrel/dispute B. Speak tough words

C. Not accepting an apology D. Something is done to make a bad situation even worse than it is

Q9. The sentence has an incorrect phrase, which are shown in bold and underlined. Select the option that is the correct phrase to be replaced so that the statement is grammatically correct. "The man to who I sold my house was a professor".

A. I sold B. I had sold

C. to whom I sold D. I did sell

Q10. Complete the sentence by choosing the correct form of the verb given in brackets. My father ______(work) as an engineer in the Railways, when he was alive.

A. working B. works

C. was worked D. worked

Q11. Who is the Indian badminton player who has become the first Indian to win the BWF Tour Finals Women's Singles title?

A. P. V. Sindhu B. Saina Nehwal

C. Ruthvika Shivani D. P. C. Thulasi

December 17, 2019 Page 2 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q11. वह भारतीय बैडम िंटन मिलाडी कौन है मिसने बीडब्ल्यएू फ टूर का महला एकल मिताब का फाइनल िीतने वाली पहली भारतीय बन गई है?

A. पी वी स धिं ु B. ाइना नेहवाल

C. 셁त्ववका सिवानी D. पी ी थुल ी

Q12. The 1857 Sepoy Mutiny rebellion began at ______.

A. Gwalior B. Meerut

C. Kanpur D. Jhansi

Q12. 1857 का मसपाही मवद्रोह ______से श셂ु हुआ।

A. B.

C. D.

Q13. Which one of the following literary works is the famous work of Shri Rabindranath Tagore?

A. Raghuvamsa B. Rangtarangini

C. Madhushala D. Gitanjali

Q13. मन륍नमलमित ᴂ से कौन सी सामहमययक रचना, श्री रवĂद्रनाथ टैगोर की प्रमसद्ध रचना है?

A. रघुविंिम B. रिंगतरिंगगनी

C. मधुिाला D. गीतािंजसल

Q14. ______is known as "Indian Father of Green Revolution" for his leadership and success in introducing and further developing high-yielding varieties of wheat in India.

A. Verghese Kurien B. Dr. M.S. Swaminathan

C. Dr M.S. Udayamurthy D. Shri Vinobha Bhave

December 17, 2019 Page 3 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q14. ______को भारत ᴂ गेह िं की 煍यादा उपि वाली मकस् ों को श셂ु और मवकमसत करने ᴂ सफलता प्राप्त करने और उसका नेतयृ व करने के कारण "हररत 啍ािंमत का भारतीय िनक" कहा िाता है।

A. वगीज कु ररयन B. डॉ. एम. ए . स्वासमनाथन

C. डॉ. एम. ए . उदयमूर्त ि D. श्री ववनोबा भावे

Q15. After the Punjab Reorganization Act was implemented, Haryana became an independent State of India on ______.

A. 10th November 1967 B. 1st November 1947

C. 1st November 1966 D. 30th November 1950

Q15. पिंिाब पनु गगठन अमिमनय लागू होने के बाद, हररयाणा ______पर भारत का एक स्वतिंत्र रा煍य बन गया।

A. 10 नविंबर 1967 B. 1 नविंबर 1947

C. 1 नविंबर 1966 D. 30 नविंबर 1950

Q16. ______headed the Rajput army that won the First Battle of Tarain.

A. Mohammed Ghori B. Prithviraj Chauhan

C. Govind Tai D. Jayachandra

Q16. ______रािपतू सेना का नेतयृ व मकया मिसने तराई िंकी पहली लडाई िीती थी।

A. मोह륍मद गोरी B. पथ्ृ वीराज चौहान

C. गोवविंद ताई D. जयचिंद्र

Q17. The Shah Commission, under the Chairmanship of Justice JC Shah, was set by the Government of India to ______.

A. Divide and set up the boundaries of Haryana B. Create the State Assembly of Haryana and Punjab

C. Establish the rules of civic body governance of D. Define the rules of state governance of Haryana Haryana

December 17, 2019 Page 4 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q17. न्याय मू तग िेसी शाह की अध्यक्षता ᴂ शाह आयोग, भारत सरकार द्वारा ______को मनिागररत मकया गया था।

A. ववभात्जत करᴂ और हररयाणा और पिंजाब की ीमाओिं को B. हररयाणा रा煍य ववधान भा बनाएिं स्थावपत करᴂ

C. हररयाणा के नागररक र्नकाय के र्नयमⴂ की स्थापना D. हररयाणा रा煍य प्रिा न के र्नयमⴂ को पररभावित करᴂ

Q18. As on 14-November-2019, who is the Agriculture Minister in the Haryana Cabinet?

A. Shri Anil Vij B. Captain Abhimanyu

C. Shri. Jai Parkash Dalal D. Shri Narbir Singh

Q18. 14-नविंबर -2019 को, हररयाणा िंमत्र िंडल ᴂ कृ मि िंत्री कौन हℂ?

A. श्री अर्नल ववज B. कैप्टन असभमन्यु

C. श्री जय प्रकाि दलाल D. श्री नरबीर स िंह

Q19. Haryana State Agricultural Marketing Board is developing ______at Ganaur, .

A. India International Horticulture Market (IIHM) B. International Institute for Hotel Management

C. Integrated Institute for Health Management D. Institute for Integrated Health and Medicine

Q19. हररयाणा रा煍य कृ मि मवपणन बोडग, सोनीपत के गन्नौर ᴂ ______मवकमसत कर रहा है।

A. इिंडडया इिंटरनेिनल हॉर्टिक쥍चर माके ट (IIHM) B. होटल प्रबिंधन के सलए अिंतरािष्ट्रीय िंस्थान

C. स्वास्थ्य प्रबिंधन के सलए एकीकृ त िंस्थान D. एकीकृ त स्वास्थ्य और गचककव ा के सलए िंस्थान

Q20. Why was Indian Scientist Ms. Gagandeep Kang, executive director of the Translational Health Science and Technology Institute (THSTI), , in the news recently?

A. The Institute has done a path-breaking B. Ms. Gagandeep Kang has been awarded Padma research under Ms. Gagandeep Kang. Bhushan.

C. Ms. Gagandeep Kang is the first Indian Woman D. Ms. Gagandeep Kang is the first Indian Woman Scientist to be elected as Royal Society Fellow. Scientist to be considered for Nobel Prize.

December 17, 2019 Page 5 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q20. भारतीय वैज्ञामनक सश्रु ी गगनदीप किं ग, 絍ािंसलेशनल हे्थ साइसिं एिंड टेक्नोलॉिी इस्िं टीट्यटू (टीएचएसटीआई), फरीदाबाद की कायगकारी मनदेशक ख़बरों ᴂ मकन कारणों से थी?

A. िंस्थान ने ुश्री गगनदीप किंग के मागिदििन मᴂ पथप्रवतिक B. ुश्री गगनदीप किंग को प饍म भूिण े 륍मार्नत ककया गया िोध ककया है। है।

C. ुश्री गगनदीप किंग रॉयल ो ाइटी फेलो के 셂प मᴂ चुनी जाने D. ुश्री गगनदीप किंग नोबेल पुरस्कार के सलए ववचार की जाने वाली पहली भारतीय मर्हला वैज्ञार्नक हℂ। वाली पहली भारतीय मर्हला वैज्ञार्नक हℂ।

Q21. As on 1-April-2019, apart from Ambala, which other Haryana Parliamentary Constituency was reserved for Scheduled Classes?

A. B.

C. D. -Mahendragarh

Q21. मदनािंक 1-अप्रैल-2019 तक , अिंबाला के अलावा, हररयाणा का कौन सा सिंसदीय क्षेत्र अनसु ूमचत वगग के मलए आरमक्षत था?

A. कु 셁क्षेत्र B. र्ह ार

C. स र ा D. सभवानी-महᴂद्रगढ़

Q22. Who was women's boxing champion from Haryana, who on her debut at International forum, won a silver medal at the 70th Strandja Memorial Boxing Tournament in February 2019?

A. Nikhat Zareen B. Manju Rani

C. Meena Kumari Devi D. Sonia Chahal

Q22. हररयाणा की महला क्ु के बािी चℂमपयन कौन थी, मिसने अिंतरागष्ट्絍ीय िंच पर अपने पहले प्रदशगन ᴂ ही फरवरी 2019 ᴂ 70वᴂ स्絍ℂड्िा े ोररयल बॉमक्सिंग टूनाग ᴂट ᴂ रित पदक िीता था?

A. र्नखत ज़रीन B. मिंजू रानी

C. मीना कु मारी देवी D. ोर्नया चहल

December 17, 2019 Page 6 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q23. Gugga Naumi, a religious festival celebrated in Haryana in the month of August or September is related to ______.

A. Goddess Lakshmi B. Snake worshipping

C. Raas Leela D. Bullock worship

Q23. गुग्गा नौ ी, अगस्त या मसतिंबर के हीने ᴂ हररयाणा ᴂ नाया िाने वाला एक िाम गक ययौहार है िो ______से सिंबिंमित है।

A. देवी लक्ष्मी B. ािंप की पूजा

C. रा लीला D. बैल की पूजा

Q24. is also known for its annual fair, the Surajkund Mela. This fair is primarily meant to ______.

A. Showcase the Mineral wealth of the State of B. Showcase Agricultural produces of the State Haryana

C. Showcase fire-crackers from all over India D. Showcase handicrafts and handlooms with the aid of craftsmen invited from all over the country

Q24. सरू िकिंु ड अपने वामिगक ेले, सरू िकिंु ड ेले के मलए भी िाना िाता है। यह ेला ख्ु य 셂प से ______के मलए होता है।

A. हररयाणा रा煍य की खर्नज िंपदा का प्रदििन B. रा煍य की कृ वि उपज को प्रदसिित करता है

C. पूरे भारत े पटाखे र्दखाना D. देि भर े आमिंत्रत्रत सित्쥍पयⴂ की हायता े हस्तसि쥍प और हथकरघा र्दखाना

Q25. Which International Fair or Mela held in Haryana gives prominence to one of the States of India each year, calling it the "Theme State"?

A. International Handlooms Fair B. Surajkund International Mela

C. International Gita Mahotstav D. International Mango Mela

Q25. हररयाणा ᴂ आयोमित होने वाला कौन सा अिंतरागष्ट्絍ीय ेला या ेला प्रययेक विग भारत के रा煍यों ᴂ प्र िु ता देता है, इसे "थी रा煍य" कहते हℂ?

A. अिंतरािष्ट्रीय हथकरघा मेला B. ूरजकिंु ड अिंतरािष्ट्रीय मेला

C. अिंतरािष्ट्रीय गीता महोवस्व D. अिंतरािष्ट्रीय आम मेला

December 17, 2019 Page 7 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q26. Surender Sharma is a famous poet and ______of Haryana.

A. Novelist B. Painter

C. Humourist D. Cartoonist

Q26. सरु ᴂद्र श ाग हररयाणा के एक प्रमसद्ध कमव और ______हℂ।

A. उपन्या कार B. गचत्रकार

C. हास्य-र लेखक D. व्यिंग गचत्रकार

Q27. Pt. Shri Ram Sharma, freedom fighter, had taken part in the Non-cooperation Movement along with Mahatma Gandhi. His magazine 'Haryana Tilak' from played an important role in the freedom movement. The magazine was a ______.

A. Monthly B. Fortnightly

C. Weekly D. Daily

Q27. पिंमडत श्री रा श ाग, स्वतिंत्रता सेनानी, ने हाय ा गािंिी के साथ असहयोग आिंदोलन ᴂ महस्सा मलया था। रोहतक से मनकलने वाली उनकी पमत्रका 'हररयाणा मतलक' ने स्वतिंत्रता आिंदोलन ᴂ एक हयवपणू ग भमू का मनभाई थी। यह पमत्रका एक ______पमत्रका थी।

A. मास क B. पाक्षक्षक

C. ाप्तार्हक D. दैर्नक

Q28. The Hills is situated in ______district of Haryana.

A. B. Jhajjar

C. Bhiwani D.

Q28. ोरनी मह्स हररयाणा के ______मिले ᴂ मस्थत है।

A. पिंचकु ला B. झ煍जर

C. सभवानी D. कैथल

December 17, 2019 Page 8 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q29. Haryana has eight ______where animals, birds, and flora are protected.

A. Natural parks B. Biodiversity parks

C. Protected reserves D. Wildlife sanctuaries

Q29. हररयाणा ᴂ आठ ______हℂ िहािं पशओु ,िं पमक्षयों और वनस्पमतयों को सिंरक्षण मदया िाता है।

A. प्राकृ र्तक उ饍यान B. जैव ववववधता उ饍यान

C. िंरक्षक्षत अभयारण्य D. वन्यजीव अभयारण्य

Q30. The northern side of Haryana is flanked by Punjab and ______.

A. B. Jammu and Kashmir

C. D.

Q30. हररयाणा का उत्तर महस्सा पिंिाब और ______से मिरा है।

A. र्द쥍ली B. ज륍मू और कश्मीर

C. उत्तराखिंड D. र्हमाचल प्रदेि

Q31. The Shiwalik range is the originating point for the river ______.

A. Ghaggar-Hakra B. Markanda

C. Krishnavati D. Sahibi

Q31. मशवामलक श्रेणी ______नदी का उद्ग स्थल है।

A. घ嵍गर-हकरा B. माकंड

C. कृ ष्ट्णावती D. ार्हबी

Q32. Blocks of reserve forest areas are confined to the Shiwalik ranges in ______and ______districts.

A. Panchkula and Nagar B. Panchkula and Ambala

C. Ambala and Yamuna Nagar D. Yamuna Nagar and

December 17, 2019 Page 9 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q32. आरमक्षत वन क्षेत्र, ______और ______मिलों ᴂ मशवामलक श्रेमणयों तक सीम त हℂ।

A. पिंचकु ला और यमुना नगर B. पिंचकु ला और अिंबाला

C. अिंबाला और यमुना नगर D. यमुना नगर और करनाल

Q33. A common institution for Punjab and Haryana, the High Court of Punjab and Haryana is an architectural marvel, having been designed by famous French architect Le Corbusier. The court complex is located in ______.

A. B.

C. Dadri D. Nuh

Q33. पिंिाब और हररयाणा के मलए एक सा ान्य सिंस्थान, पिंिाब और हररयाणा उ楍च न्यायालय, वास्तुकला का एक च यकार है, मिसे प्रमसद्ध फ्ािंसीसी वास्तुकार ले कोबगुसीयर द्वारा मडिाइन मकया गया है। न्यायालय का पररसर ______ᴂ मस्थत है।

A. चिंडीगढ़ B. रेवाडी

C. दादरी D. नुह

Q34. The current Legislative Assembly is the ______since formation of Haryana.

A. Eleventh B. Twelfth

C. Thirteenth D. Fourteenth

Q34. हररयाणा के गठन के बाद से वतग ान मविान सभा ______है।

A. 嵍यारहवीिं B. बारहवीिं

C. तेरहवीिं D. चौदहवीिं

Q35. Situated close to the national capital Delhi, ______is home to many large-scale industries, earning it the reputation of being the biggest industrial city of Haryana and North India.

A. B. Faridabad

C. Yamuna Nagar D. Rewari

December 17, 2019 Page 10 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q35. देश की राििानी मद्ली के मनकट मस्थत, ______कई बडे-बडे उद्योगों का गढ़ है, मिसे हररयाणा और उत्तर भारत का सबसे बडा औद्योमगक शहर होने की प्रमतष्ठा प्राप्त है।

A. गुडगािंव B. फरीदाबाद

C. यमुना नगर D. रेवाडी

Q36. The annual animal fair held in Jahazgarh village in ______district, is the largest gathering of buyers and sellers in Haryana. The main attraction of the fair is the most famous buffalo breed of India, Murrah.

A. Rewari B. Bhiwani

C. Jhajjar D. Sonepat

Q36. ______मिले के िहािगढ़ गािंव ᴂ लगने वाला वामिगक पश ु ेला, हररयाणा के िरीदारों और मव啍े ताओ िं का सबसे बडा ि िट है। ेले का ख्ु य आकिगण भारत के भℂसों की सबसे प्रमसद्ध नस्ल है, रु ाह है।

A. रेवाडी B. सभवानी

C. झ煍जर D. ोनीपत

Q37. The first CNG train of India runs between ______and ______of Haryana.

A. Sonepat and Bhiwani B. and Chandigarh

C. and Sonepat D. Rohtak and Rewari

Q37. भारत की पहली सीएनिी 絍ेन, हररयाणा के रोहतक और ______के बीच चलती है।

A. ोनीपत और सभवानी B. पानीपत और चिंडीगढ़

C. त्जिंद और ोनीपत D. रोहतक और रेवाडी

Q38. Which of the following is a computer threat?

A. Bug B. Website

C. DoS attack D. Stocking

December 17, 2019 Page 11 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q38. मन륍नमलमित ᴂ से कौन सा किं प्यटू र ितरा है?

A. बग B. वेब ाइट

C. डॉ अटैक D. स्टॉककिं ग

Q39. Network failure is primarily a ______issue.

A. performance B. connectivity

C. security D. remoting

Q39. नेटवकग मवफलता ख्ु य 셂प से एक ______स स्या है।

A. परफॉरमᴂ B. कनेत्टटववटी

C. स टयूररटी D. ररमोर्टिंग

Q40. Find the odd-one out in the following: Tortoise, Frog, Crab, Fish

A. Tortoise B. Fish

C. Frog D. Crab

Q40. मन륍नमलमित ᴂ से असिंगत का चयन करᴂ: कछु आ, ᴂढक, केकडा, छली

A. कछु आ B. मछली

C. मᴂढक D. केकडा

Q41. Choose the correct option that best expresses a relationship SIMILAR to that expressed in the original pair: Electricity: Wire::Water: ?

A. Beach B. Sea

C. Pipe D. Cup

December 17, 2019 Page 12 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q41. सही मवक्प चनु ᴂ िो लू िोडी िैसा स륍बन्ि मदिाता हो: मबिली: तार :: पानी:?

A. मुद्रतट B. मुद्र

C. पाइप D. कप

Q42. Find the next number: 10, 17, 31, 52, 80, ?

A. 92 B. 100

C. 115 D. 121

Q42. अगला निंबर ढूिंढᴂ: 10, 17, 31, 52, 80, ?

A. 92 B. 100

C. 115 D. 121

Q43. In certain code, if UGLY is coded as 4, then BEAUTIFUL will be coded as?

A. 7 B. 9

C. 11 D. 14

Q43. यमद एक कोड भािा ᴂ UGLY को 4 मलिा िाता है तो BEAUTIFUL को क्या मलिा िाएगा?

A. 7 B. 9

C. 11 D. 14

Q44. Solve the equation

A. B.

C. D.

December 17, 2019 Page 13 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q44. स ीकरण को हल करᴂ:

A. B.

C. D.

Q45. A car travelled at a speed of 60 kilometers an hour to cover a distance of 180 kilometers and then covered the remaining 180 kilometers in 2 hours. Find its average speed.

A. 66 kilometers per hour B. 72 kilometers per hour

C. 80 kilometers per hour D. 84 kilometers per hour

Q45. एक कार ने 60 मकलो ीटर प्रमत ििंटे की र祍तार से 180 मकलो ीटर दरू ी तय की और उसके बाद लौटते स य 2 ििंटे ᴂ 180 मकलो ीटर दरू ी तय की। इसकी औसत र祍तार मनकालᴂ।

A. 66 ककलोमीटर प्रर्त घिंटा B. 72 ककलोमीटर प्रर्त घिंटा

C. 80 ककलोमीटर प्रर्त घिंटा D. 84 ककलोमीटर प्रर्त घिंटा

Q46. A park is 2000 centimeters long and 1000 centimeters wide. What is the area of the park in square meters?

A. 30 square meters B. 60 square meters

C. 120 square meters D. 200 square meters

Q46. एक पाकग 2000 सᴂटी ीटर लिंबा और 1000 सᴂटी ीटर चौडा है। वगग ीटर ᴂ पाकग का क्षेत्रफल मकतना है?

A. 30 वगि मीटर B. 60 वगि मीटर

C. 120 वगि मीटर D. 200 वगि मीटर

Q47. Rahul takes a loan of Rs. 8,000 at 12% per year as the rate of interest. Find the amount he has to pay at the end of one year.

A. Rs. 9,580 B. Rs. 9,000

C. Rs. 8,960 D. Rs. 8,480

December 17, 2019 Page 14 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q47. राहुल ने 12% प्रमत विग की दर से किग मलया। विग के अिंत ᴂ उसे मकतनी रक चकानीु होगी?

A. 9,580 셁पये B. 9,000 셁पये

C. 8,960 셁पये D. 8,480 셁पये

Q48. What is the most common state of matter in universe?

A. Plasma B. Solid

C. Liquid D. Gas

Q48. ब्रािंड ᴂ पदाथग आ तौर पर मकस अवस्था ᴂ रहते हℂ?

A. प्ला煍मा B. ठो

C. द्रव D. गै

Q49. We use sodium bicarbonate when cooking. What is this chemical commonly known as?

A. Salt B. Vinegar

C. Baking soda D. Sugar

Q49. िाना पकाने के दौरान ह सोमडय बाइकाबोनेट का उपयोग करते हℂ। इस केम कल को आ तौर पर मकस ना से िाना िाता है?

A. नमक B. स रका

C. बेककिं ग ोडा D. चीनी

Q50. Food chains can be interconnected to form a ______.

A. Food pyramid B. Food web

C. Food circles D. Food links

Q50. एक ______का मन ागण करने के मलए िाद्य श्रिंिृ ला को आपस ᴂ िोडा िा सकता है।

A. फ़ू ड वपरासमड B. फ़ू ड वेब

C. फ़ू ड किल D. फ़ू ड सलिंक

December 17, 2019 Page 15 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q51. Sheet metal work is generally finished with the metal gadget called ______.

A. sheet B. press

C. punch D. gauge

Q51. चादरी िातु का कायग सा ान्यतः िातु से बने यिंत्र से सिंपणू ग मकया िाता है मिसे _____ कहा िाता है|

A. चादर B. प्रे

C. पिंच D. गेज

Q52. Which property of material helps to retain vitality without experiencing plastic deformation ?

A. Ductility B. Creep

C. Malleability D. Resilience

Q52. मकसी सा ग्री का कौनसा गुणस्वभाव मबना प्लामस्टक मवकृ मत अनभु व मकये ाम गकता बनाये रिने ᴂ सहायता करता है?

A. तन्यता B. पिण

C. आघातवधिनीयता D. तन्यकता

Q53. Name the instrument that is used to measure length (precisely to 0.1 millimeter) , thickness and diameter (both internal and external diameter) of the object.

A. Micrometer B. Vernier calipers

C. Bevel protector D. Radius gauge

Q53. उस उपकरण का ना बताइये िो मकसी वस्तु की लिंबाई(यथावत 0.1 mm तक ), ोटाई व व्यास (अिंद셂नी व बाहरी व्यास दोनों) को ापने के मलए का ᴂ मलया िाता है|

A. माइक्रोमीटर B. वर्नियर कैलीप ि

C. बेवल प्रोरैटट ि D. व्या गेज

Q54. Which is the unique tool utilized for extricating or fixing round opened nuts?

A. Wrench B. Groovers

C. C-spanner D. Mallets

December 17, 2019 Page 16 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q54. राउिंड ओपन्ड नट्स को मनकलने व लगाने के मलए मकस एक ात्र औिार को का ᴂ मलया िाता है?

A. रᴂच B. ग्रोव ि

C. C-त्स्पन ि D. मॉले絍

Q55.

Which crease from the following options BEST fits the image given above?

A. Grooved seam B. Capstrip seam

C. Paned down seam D. Pittsburg seam Q55.

ऊपर दी गयी आकृ मत ᴂ नीचे मदए गए मवक्पों ᴂ से कौनसी सबसे उपयक्तु रहेगी?

A. ग्रूवड ीम B. कैप् र्रप ीम

C. पेनड डाउन ीम D. वप絍 बगि ीम

Q56. Which forming process refers to cutting of small indentations on the edges of a workpiece?

A. False wiring B. Embossing

C. Notching D. Edge shifting

Q56. मकस सिंगठन प्रम啍या ᴂ वकगपीस के मकनारों पर छोटे हामशये काटे िाते है?

A. फा쥍 वायररिंग B. ए륍बॉस िंग

C. नोगचिंग D. एज सित््टिंग

December 17, 2019 Page 17 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q57. Parallel line method in the sheet metal is used in ______.

A. Pyramids and cones B. Transition pieces

C. Spherical surfaces D. Prisms and cylinders

Q57. शीट ेटल ᴂ स ानािंतर रेिा मवमि का इस्ते ाल _____ ᴂ मकया िाता है|

A. वपरासमड व कोन B. पररगमन टुकडे

C. गोलाकार तहⴂ D. वप्र浍म व स लᴂडर

Q58. Which method does not belong to pattern development?

A. Geometrical construction B. Triangulation

C. Parallel line D. Radial line

Q58. मन륍न ᴂ कौनसी मवमि स्व셂प मवकास से सिंबिंि नहĂ रिती है?

A. 煍यासमतीय र्नमािण B. त्रत्रभुजन

C. मानािंतर रेखा D. रेडडयल लाइन

Q59. The punches that has thin edges are called ______.

A. Solid punches B. Edge punches

C. Hollow punches D. Hand punches

Q59. मिन पिंचों की मकनाररयााँ पतली होती है, उन्हᴂ ______कहा िाता है|

A. ठो पिंच B. तीक्ष्ण पिंच

C. खोखले पिंच D. हℂड पिंच

December 17, 2019 Page 18 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q60.

Name the type of rivet shown in the above figure.

A. Semi-tubular B. Tubular rivet

C. Solid rivet D. Bifurcated rivet Q60.

ऊपर मदए गए मचत्र ᴂ मदिाए गए ररवेट के प्रकार का ना बताइये|

A. अ饍िध-नसलकाकार B. नलीदार ररवेट

C. ठो ररवेट D. 饍ववभात्जत ररवेट

Q61. Which kind of fastening is required when the metal screw is exposed to atmosphere?

A. Oxide proof B. Chemical proof

C. Water proof D. Attaching stiffeners

Q61. िब िातु से बने पᴂच को वातावरण ᴂ अनावतृ मकया िाता है तब मकस प्रकार की कसनी का इस्ते ाल मकया िाएगा?

A. ऑट ाइड अभे饍य B. र ायन अभे饍य

C. जल अभे饍य D. स्टीफन ि िंल嵍न करके

Q62. Name the flux that is used to prevent oxide re-forming.

A. Passive B. Active

C. Solder D. Soldering iron

December 17, 2019 Page 19 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q62. उस फ्लक्स का ना बताइये िो ऑक्साइड के पनु ःमन ागण से बचाता है|

A. र्नत्ष्ट्क्रय B. कक्रय

C. टािंका D. टािंकने वाला लोहा

Q63. The mechanical quality of the delicate fastened metal sheet joints is in the order of ______.

A. 5-10 Mn/m2 B. 15-20 Mn/m2

C. 15-30 Mn/m2 D. 10-20 Mn/m2

Q63. नािकु बिंि े हुए चादरी िातु की यािंमत्रक गुणवत्ता ______के 啍 ᴂ होती है|

A. 5-10 Mn/m2 B. 15-20 Mn/m2

C. 15-30 Mn/m2 D. 10-20 Mn/m2

Q64.

What does the above schematic diagram indicates?

A. Elbow pipe offset B. T-pipe offset

C. Rectangular Pipe offset D. Diagonal pipe offset

December 17, 2019 Page 20 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q64.

ऊपर मदया गया योिनाबद्ध आरेि मकसे दशागता है?

A. ए쥍बो पाइप ऑफ ेट B. T-पाइप ऑफ ेट

C. आयताकार पाइप ऑफ ेट D. ववकणि पाइप ऑफ ेट

Q65.

To develop the pattern of t pipe, what should be the angle used?

A. 30 degree B. 45 degree

C. 60 degree D. 90 degree

December 17, 2019 Page 21 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q65.

टी पाइप के स्व셂प को मवकमसत करने के मलए मकतने कोण का इस्ते ाल मकया िाना चामहए?

A. 30 degree B. 45 degree

C. 60 degree D. 90 degree

Q66. The process of cleaning iron or steel articles with weaken sulphuric acid for around 15-20 minutes is called as ______.

A. Coating B. Pickling

C. Galvanizing D. Tinning

Q66. लोहे व इस्पात की वस्तुओ िं को लगभग 15-20 म नट तक क िोर स्फु ररक एमसड से साफ करने की प्रम啍या को ______कहते है|

A. लेपन B. वपकसलिंग

C. जस्तीकरण D. कलईकारी

Q67. Name the surface treatment used to prevent filiform corrosion on metals.

A. Tinning B. Galvanizing

C. Anodising D. Electro coating

Q67. िातुओ िं पर होने वाले तिंतु셂प सिंक्षारण से बचाने के मलए इस्ते ाल मकए िाने वाले पष्ठृ उपचार का ना बताइए|

A. कलईकारी B. जस्तीकरण

C. उ饍-饍वारीकरण D. इलेटरो कोर्टिंग

December 17, 2019 Page 22 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q68. The cutting of piece of metal of required size and shape from a sheet metal is called as ______.

A. cupping B. spinning

C. punching D. blanking

Q68. चादरी िातु से आवश्यक आकार व आकृ मत के िातु के टुकडे काटने की प्रम啍या को ______कहते हℂ।

A. कत्प्पिंग B. त्स्पर्निंग

C. पिंगचिंग D. ब्लकℂ किं ग

Q69. What sort of ducts are utilized in the spots where there is less dampness content?

A. Fabric ducts B. Wooden ducts

C. Flexible ducts D. Pvc low profile ducting

Q69. िहााँ आद्रगता की ात्रा क होती है उन स्थानों ᴂ मकस प्रकार की नमलकाओ िं का इस्ते ाल मकया िाता है?

A. तन्त ु नसलकाएँ B. काष्ट्ठ नसलकाएँ

C. न륍य नसलकाएँ D. पीवी ी लो प्रोफाइल नसलकाएँ

Q70. When arc welding radiates, an intense light snap on_____ are utilized to cover the windows of the welding truck to maintain a strategic distance.

A. lightweight screens B. portable screens

C. protective screens D. light proof screens

Q70. िब आकग वेम्डिंग मवकीणग होती है, तब ____ पर तीव्र प्रकाश आशमु चत्र का इस्ते ाल सा ररक दरू ी बनाए रिने के मलए वेम्डिंग 絍क की मिडमकयों को ढाँकने के मलए मकया िाता है|

A. अ쥍पभार स्क्रीन B. ुवाह्य स्क्रीन

C. रक्षावमक स्क्रीन D. प्रकािरोधी स्क्रीन

Q71. Name the flame that chemically reacts with metal and form metal carbide.

A. Oxidizing flame B. Carburising flame

C. Natural flame D. Reducing flame

December 17, 2019 Page 23 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q71. उस लौ का ना बताइए िो िातु से रसायमनक म啍या करती है व ेटल काबागइड बनाती है|

A. ऑट ीकरण लौ B. कबुरि रत लौ

C. प्राकृ र्तक लौ D. न्यूनन लौ

Q72. Name the joint commonly used to interface underground pipelines of huge width.

A. Socket and spigot B. Bulged socket

C. Plain coupling D. Hexagonal

Q72. मवशाल चौडाई वाली भमू गत पाइपलाइनों को ढाँकने के मलए इस्ते ाल मकये िाने वाले िोड को सा ान्यतः मकस ना से िाना िाता है|

A. ॉकेट व स्पीगोट B. ब쥍जड ॉकेट

C. प्लेन कपसलिंग D. हेट ागोनल

Q73. Name the sheet metal used for manufacturing aircrafts and aerospace.

A. Steel B. Aluminium

C. Carbon steel D. Alloy steel Q73. उस चादरी िातु का ना बताइये िो मव ान व अिंतररक्ष प्रौद्योमगकी ᴂ इस्ते ाल की िाती है।

A. इस्पात B. ए쥍युमीर्नयम

C. काबिन इस्पात D. समश्रधातु इस्पात

Q74. ______alloys with the highest density has more resistance to corrosion.

A. Ferrous B. Nickel

C. Non ferrous D. Chromel

Q74. उ楍च िनयव वाले ______म श्रिातुओ िं ᴂ सिंक्षारण के मलए प्रमतरोि 煍यादा होता है|

A. लोहमय B. र्नकेल

C. अलोह D. क्रोम

December 17, 2019 Page 24 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q75. Which is the most commonly used roller cutter bit?

A. Square B. Tricone drill

C. Drag drill D. Air hammer

Q75. आ तौर पर सबसे 煍यादा इस्ते ाल मकया िाने वाला रोलर कटर मबट कौनसा है?

A. वगि B. त्रत्रकोणीय डिल

C. िैग डिल D. एयर हैमर

Q76. ______machine is utilized to change the distance across the metal fitting to retain it to the end of the hose.

A. Fly ball press B. Beading

C. Swaging D. Cone rolling

Q76. ______शीन का इस्ते ाल िातु की मफमटिंग की दरू ी बढ़ाने के मलए मकया िाता है तामक इसे नली के छोर पे रोका िाए सके |

A. ्लाई बॉल प्रे B. बीडडिंग

C. स्वैगगिंग D. कोन रोसलिंग

Q77. Which tin alloy is used as the superconducting magnet?

A. Soft solders B. Niobium

C. Pewert D. Bronze

Q77. मकस मटन म श्रिातु का इस्ते ाल अमतचालक च륍ु बक ᴂ मकया िाता है?

A. ॉ्ट ो쥍ड ि B. र्नओत्रबयम

C. पेवेटि D. ब्रⴂज

Q78. Which type of bending machines are needed to bend low carbon steel?

A. Hydraulic pipe B. Roll forming

C. Slip roll forming D. Tube bending

December 17, 2019 Page 25 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q78. मन륍न काबगन इस्पात को ोडने के मलए मकस प्रकार की बेमन्डिंग शीन का इस्ते ाल मकया िाता है?

A. जलीय पाइप B. रोल गठन

C. त्स्लप रोल गठन D. 絍यूब बेत्न्डिंग

Q79. Name the die that performs two or more operation simultaneously in a single stroke of punch press , so that complete component is obtained for each stroke.

A. Steel rule die B. Wire pulling die

C. Progressive die D. Rotary die

Q79. उस डाई का ना बताइये िो पिंच प्रेस के एक आिात ᴂ दो या दो से अमिक कायग साथ करती है, मिससे मक प्रययेक आिात से परू ा अिंश प्राप्त हो सके |

A. स्टील 셂ल डाई B. वायर पुसलगिं डाई

C. प्रोग्रेस व डाई D. रोटरी डाई

Q80. ______are utilized to safely locate and support the work so that the product formed has uniform conformity and interchangeability.

A. Fixtures B. Jig

C. Die holders D. Break folders

Q80. ______का उपयोग सरु मक्षत 셂प से कायग का पता लगाने और सहारा देने के मलए मकया िाता है तामक गमठत उयपाद ᴂ एक셂प अन셂ु पता और मवमन ेयता हो।

A. कफट चर B. त्जग

C. डाई हो쥍डर D. ब्रेक फ़ो쥍ड ि

Q81. The process of finely shaping and smoothing the sheet metal is called as ______.

A. spinning B. planishing

C. sinking D. raising

December 17, 2019 Page 26 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q81. चादरी िातु को सक्षू 륍ता से आकार देने व स रेिण करने की प्रम啍या को ______कहते हℂ।

A. त्स्पर्निंग B. प्लॅर्नसिगिं

C. स किं किं ग D. रेत्जिंग

Q82. What do the shearing produce on the irregular edges of the sheared part?

A. Defect B. Edge burr

C. Flaw D. Blank

Q82. कतरनी मकये हुए भाग की अमनयम त मकनारों पर कतरनी करने से क्या उयपन्न होता है?

A. त्रुर्ट B. एज बरि

C. दोि D. ब्लℂक

Q83.

Name the type of weld joint shown in the above diagram.

A. Lap joint B. Butt joint

C. Butt strap joint D. Cruciform Q83.

मदए गए मचत्र ᴂ दशागये गए वेम्डिंग िॉइटिं के प्रकार का ना बताइए|

A. लैप जॉइिंट B. ब絍ट जॉइिंट

C. ब絍ट स्रैप जॉइिंट D. क्रु स फोम ि

Q84. The welding machine is smaller than other welding machines of same amperage but increases the energy efficiency of the metals. Which welding machine will suit the above statement?

A. Spot welding machine B. Inverter type welding machine

C. Flash welding machine D. Stud arc welding machine

December 17, 2019 Page 27 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q84. यह वेम्डिंग शीन स ान एम륍पयरता वाली अन्य वेम्डिंग शीनों से छोटी होती है पर यह िातुओ िं की ऊिाग क्ष ता को बढ़ा देती है। उक्त कथन मकस वेम्डिंग शीन के मलए उपयक्तु है?

A. स्पॉट वेत्쥍डिंग मिीन B. इन्वटिर टाइप वेत्쥍डिंग मिीन

C. 祍लैि वेत्쥍डिंग मिीन D. स्टड आकि वेत्쥍डिंग मिीन

Q85. The resistance welding is a group of fusion welding that uses a combination of ______and ______.

A. temperature and current B. heat and temperature

C. heat and pressure D. current and metal type

Q85. प्रमतरोि वेम्डिंग मवलय वेम्डिंग का स ूह है िो ______व ______का सम륍 श्रण का ᴂ लेता है|

A. तापमान व करिंट B. ऊष्ट्मा व तापमान

C. ऊष्ट्मा व दबाव D. करिंट व धातु प्रकार

Q86. The utilization of carbon dioxide or oxygen in the arc welding is called as ______.

A. metal inert gas welding B. flux cored arc welding

C. gas metal arc welding D. tube arc welding

Q86. आकग वेम्डिंग ᴂ काबगन डाइऑक्साइड या ऑक्सीिन के इस्ते ाल को ______कहते हℂ।

A. मेटल इनटि गै वेत्쥍डिंग B. ्लट कोरड आकि वेत्쥍डिंग

C. गै मेटल आकि वेत्쥍डिंग D. 絍यूब आकि वेत्쥍डिंग

Q87. Which type of polarity results in Quicker melt-off of the electrode and also helps in Quicker deposition rate?

A. Reverse polarity B. Straight polarity

C. Alternating polarity D. Positive polarity

Q87. मकस प्रकार की ध्रवु ता का पररणा इलेक्絍ोड का तेज़ी से गलना होता है तथा यह तेज़ मनक्षेपन ᴂ भी ददगार होता है?

A. ववपरीत ध्रुवता B. स्पष्ट्ट ध्रुवता

C. एकान्तर ध्रुवता D. कारावमक ध्रुवता

December 17, 2019 Page 28 of 29

Adv. No. 12/2019, Cat No. 80, Sheet Metal Worker Instructor (Theory), SKIL DEVELOPMENT AND INDUSTRIAL TRAINING DEPARTMENT, HARYANA Afternoon Session

Q88. Which tungsten electrode has the poorest heat resistance and electron emission characteristic of all tungsten electrodes?

A. Pure tungsten B. Thorium tungsten

C. Cerium tungsten D. Zirconium tungsten

Q88. मकस टिंगस्टन का सभी टिंगस्टन इलेक्絍ोड्स ᴂ से सबसे तु楍छ उष्ट् प्रमतरोि व इलेक्絍ान उयसिगन मवशेिता होती है?

A. िु饍ध टिंगस्टन B. थोररयम टिंगस्टन

C. ैररयम टिंगस्टन D. त्ज़रकोर्नयम टिंगस्टन

Q89. What cracks are caused by TIG welding when metal gets too hot rapidly or chills off too rapidly?

A. Cold cracks B. Hot cracks

C. Crater cracks D. Underbead cracking

Q89. TIG वेम्डिंग से मकस प्रकार की दरारᴂ पैदा होती हℂ, िब िातु ि्दी से गर या ठिंडी होती है?

A. िीत दरारᴂ B. गमि दरारᴂ

C. ग蕍ढा दरारᴂ D. अिंडरबेड दरारᴂ

Q90. Which cutter uses a very high pressure jet of water and an abrasive to cut a wide range of materials?

A. Plasma cutter B. Laser cutter

C. Water jet cutter D. Punching cutter

Q90. कौन सा कटर पानी की उ楍च दबाव वाली िार व अपििगक का इस्ते ाल सा मग्रयों की मवस्ततृ श्रिंिृ ला को काटने के मलए करता है?

A. प्ला煍मा कटर B. लेज़र कटर

C. वॉटर जेट कटर D. पिंगचिंग कटर

December 17, 2019 Page 29 of 29