DOCSLIB.ORG

Siemens Documentation, Book A30828-X1121-A807-02-7671

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Siemens Documentation, Book A30828-X1121-A807-02-7671 Theory of Operations Guide SURPASS hiQ 8000 Version 10.0 November 2005 A30828-X1121-A807-02-7671 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical, electronic, photocopying, recording, or otherwise, without prior written permission of Siemens. The software described in this publication is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Request Siemens publications from your Siemens representative or the Siemens branch serving you. Publications are not stocked at the address below. Siemens Network Convergence LLC 271 Mill Road Chelmsford, MA 01824 SURPASS and NetManager are trademarks of Siemens AG or its affiliates and subsidiaries. All other trademarks and company names are the property of their respective owners. © 2005 Siemens Communications, Inc. All rights reserved. bkhis.fm History of Changes History of Changes 0 Document Version Date Summary 01 August 2005 Initial issue for Version 10.0 02 November 2005 Modifications / additions A30828-X1121-A807-02-7671, November 2005 SURPASS hiQ 8000, Theory of Operations Guide 0-iii bkhis.fm History of Changes A30828-X1121-A807-02-7671, November 2005 0-iv SURPASS hiQ 8000, Theory of Operations Guide bkTOC.fm Contents Contents 0 History of Changes . 0-iii List of Figures . 0-x List of Tables . 0-xi 1 About This Guide . 1-1 1.1 Intended Audience. 1-1 1.2 What You Need to Know . 1-1 1.3 What’s New in This Guide . 1-1 1.4 How to Use This Guide . 1-2 1.5 Conventions. 1-2 1.6 Support Information . 1-3 2 SURPASS hiQ 8000 Overview . 2-1 2.1 Softswitch Introduction. 2-1 2.1.1 Hardware. 2-1 2.1.2 Middleware . 2-2 2.1.3 Software . 2-2 2.1.4 Security . 2-2 2.1.5 Management . 2-3 2.2 Functionalities of the SURPASS hiQ 8000 Softswitch. 2-3 2.3 Feature List . 2-4 2.4 Solutions Overview . 2-5 2.4.1 Voice Over Cable Solution . 2-5 2.4.2 Voice Over Broadband Solution . 2-5 2.4.3 Business Connection Solution. 2-6 3 Hardware . 3-1 3.1 Platforms . 3-1 3.1.1 Sun 240 Platforms. 3-1 3.1.2 Sun 1280 Platforms. 3-3 3.1.3 Platform Summary. 3-5 3.2 Other Hardware . 3-6 3.2.1 External Disk Arrays . 3-6 3.2.1.1 StorEdge S1 Disk Array . 3-6 3.2.1.2 StorEdge 3120 Disk Array (Available January 2005) . 3-8 3.2.1.3 StorEdge 3510 Disk Array . 3-9 3.2.2 SS7 Module. 3-10 3.2.3 Ethernet Connectivity . 3-10 3.2.4 Ethernet Switches . 3-12 3.2.5 Technical Specifications . 3-12 A30828-X1121-A807-02-7671, November 2005 SURPASS hiQ 8000, Theory of Operations Guide 0-v bkTOC.fm Contents 4 Software . 4-1 4.1 Software Functional Units . 4-2 4.1.1 Third Party Software. 4-3 4.1.2 Resilient Telco Platform (RTP) . 4-3 4.1.2.1 Important RTP Components . 4-5 4.1.2.2 Support of Active/Active Applications . 4-6 4.1.3 Core Building Blocks of the Application Software. 4-8 4.1.3.1 Universal Call Engine (UCE) . 4-8 4.1.3.2 Signaling Managers . 4-10 4.1.3.3 Connection Control Manager . 4-12 4.2 SURPASS hiQ 8000 Software Features . 4-15 4.3 SURPASS hiQ 8000 Call Processing . 4-19 4.3.1 Call Control. 4-19 4.3.2 Address Translation and Routing . 4-20 4.3.2.1 Assigning Routes via a Route List . 4-23 4.3.2.2 Using Cyclic and Rotary Searches to Select a Route . 4-23 4.3.2.3 Alternate Routing . 4-24 4.3.2.4 Prefix Digit Translation. 4-24 4.3.2.5 E.164 Directory Number Translation . 4-24 4.3.2.6 Most-Matched Digit Translation . 4-25 4.3.2.7 Interchangeable NPA and NXX . 4-25 4.3.2.8 Origin Dependent Routing . 4-25 4.3.2.9 Exchange Access/Feature Group D . 4-26 4.3.2.10 Alias Translation and Routing . 4-26 4.3.2.11 LNP Trigger Detection . 4-27 4.3.2.12 Default Routing . 4-27 4.3.2.13 Vertical Service Code Translation . 4-28 4.3.2.14 E.164 to H.323 Routing . 4-28 4.3.2.15 Least Cost Routing . 4-28 4.3.2.16 Glare Handling. 4-28 4.3.3 Invocation of Features/Services . 4-29 4.3.4 Inherent Tandem Switching Capabilities . 4-31 4.3.4.1 Intercept and Announcement Handling . ..
Load more

Recommended publications
  • SS7 – Signaling System Number 7
    SS7 – Signaling System Number 7 818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878 Phone: (301) 670-4784 Fax: (301) 670-9187 Email: [email protected] Website: https://www.gl.com 1 SS7 – A Brief Overview • Defined by ITU-T in its Q.700-series, ANSI, and ETSI • Out-of-band signaling system • Designed for call control, remote network management, and maintenance • Combines circuit-switched and packet-switched networks • Suitable for use on point-to-point terrestrial and satellite links • SS7 networks are flexible, reliable, with capacity up to 64 Kbps 2 T1 E1 Analyzer Hardware Platforms 3 TDM mTOP™ Solutions mTOP™ tProbe™ FXO FXS Dual UTA 1U tProbe™ w/ FXO FXS 4 Applications • Allows telecommunications networks to offer wide ranges of services such as telephony, fax transmission, data transfer • Setting up and tearing down circuit-switched connections • Support for Intelligent Network (IN) services such as toll-free (800) calling, SMS, EMS • Mobility management in cellular networks • Local Number Portability (LNP) to allow subscribers to change their service, service provider, and location without needing to change their telephone number • Support for ISDN 5 SS7 Network Architecture 6 Signaling Points • SS7 constitutes three different types of Signaling Points (SP) – ➢ Signaling Transfer Point ➢ Service Switching Point ➢ Service Control Point Signaling Transfer Points Service Switching Points Service Control Points Transfers SS7 messages between Capable of controlling voice circuits via a Acts as an interface between telecommunications other SS7 nodes voice switch databases and the SS7 network Acts as a router for SS7 messages Converts signaling from voice switch into Provide the core functionality of cellular networks SS7 format Does not originate SS7 messages Can originate and terminate messages, but Provides access to database cannot transfer them 7 Signaling Links Access Links connects SCP or SSP to an STP.
    [Show full text]
  • SIU Developers Manual
    Dialogic® DSI Signaling Servers SS7G41 SIU Developers Manual www.dialogic.com Copyright and Legal Notice Copyright© 2012. Dialogic Inc. All Rights Reserved. You may not reproduce this document in whole or in part without permission in writing from Dialogic Inc. at the address provided below. All contents of this document are furnished for informational use only and are subject to change without notice and do not represent a commitment on the part of Dialogic Inc. and its affiliates or subsidiaries (“Dialogic”). Reasonable effort is made to ensure the accuracy of the information contained in the document. However, Dialogic does not warrant the accuracy of this information and cannot accept responsibility for errors, inaccuracies or omissions that may be contained in this document. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH DIALOGIC PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in certain safety-affecting situations. Please see http://www.dialogic.com/about/legal.htm for more details. Due to differing national regulations and approval requirements, certain Dialogic products may be suitable for use only in specific countries, and thus may not function properly in other countries.
    [Show full text]
  • Mobile Application Part (MAP)
    3GPP2 X.S0004-000-E v 6.0 Date: July 2007 Mobile Application Part (MAP) INTRODUCTION COPYRIGHT 3GPP2 and its Organizational Partners claim copyright in this document and individual OPs may copyright and issue documents or standards publications in individual Organizationial Partner’s name based on this document. Requests for reproduction of this document should be directed to the 3GPP2 Secretariat at [email protected]. Requests to reproduce individual Organizationial Part- ner’s documents should be directed to that Organizational Partner. See www.3gpp2.org for more information. X.S0004-000-E 1 2 Revision History 3 4 Revision Date Remarks 5 (IS-41) 0 February 1988 Initial publication. 6 7 (IS-41) A January 1991 8 9 (IS-41) B December 1991 10 (IS-41) C February 1996 11 12 TIA/EIA-41-D December 1997 Initial ANSI publication. 13 X.S0004-000-E v1.0 March 2004 Initial publication with new part 14 X.S0004-500 ••• 590-E v1.0 structure. 15 X.S0004-700 ••• 790-E 16 17 X.S0004-000-E v2.0 July 2005 Version 2.0. 18 X.S0004-400-E July 2005 Initial publication with new part 19 X.S0004-600 ••• 691-E structure. 20 21 X.S0004-000-E v3.0 October 2005 Version 3.0. 22 X.S0004-691-E v2.0 October 2005 Addition of Annex F: RECOVERY 23 FROM SCCP SEGMENTATION 24 FAILURE. 25 26 X.S0004-000-E v4.0 May 2006 Version 4.0. 27 X.S0004-200 and 290-E May 2006 Initial ANSI publication with new 28 part structure.
    [Show full text]
  • SS7 Protocol Stack
    CHAPTER 3 SS7 Protocol Stack This chapter describes the components of the SS7 protocol stack. A stack is a set of data storage locations that are accessed in a fixed sequence. The SS7 stack is compared against the Open Systems Interconnection (OSI) model for communication between different systems made by different vendors. Figure 3-1 shows the components of the SS7 protocol stack. SS7 Level 1: Physical Connection This is the physical level of connectivity, virtually the same as Layer 1 of the OSI model. SS7 specifies what interfaces will be used, both Bellcore (Telecordia) and ANSI call for either the DS0A or the V.35 interface. Because central offices are already using DS1 and DS3 facilities to link one another, the DS0A interface is readily available in all central offices, and is preferred in the SS7 network. As the demands on the SS7 network increase (local number portability), and as the industry migrates toward ATM networks, the DS1 interface will become the link interface. SS7 Level 2: Data Link The data link level provides the network with sequenced delivery of all SS7 message packets. Like the OSI data link layer, it is only concerned with the transmission of data from one node to the next, not to its final destination in the network. Sequential numbering is used to determine if any messages have been lost during transmission. Each link uses its own message numbering series independent of other links. SS7 uses CRC-16 error checking of data and requests retransmission of lost or corrupted messages. Length indicators allow Level 2 to determine what type of signal unit it is receiving, and how to process it.
    [Show full text]
  • MTP/SCCP/SSCOP and SIGTRAN (Message of SS7 Over IP); Message Transfer Part 3 User Adaptation Layer (M3UA)
    ETSI TS 102 142 V1.1.1 (2003-05) Technical Specification Services and Protocols for Advanced Networks (SPAN); MTP/SCCP/SSCOP and SIGTRAN (Message of SS7 over IP); Message transfer part 3 User Adaptation layer (M3UA) [Endorsement of RFC 3332 (2002), modified] 2 ETSI TS 102 142 V1.1.1 (2003-05) Reference DTS/SPAN-130263 Keywords M3UA, MTP, SCCP, SIGTRAN, SS7, endorsement ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [email protected] Copyright Notification No part may be reproduced except as authorized by written permission.
    [Show full text]
  • Vocaltec SS7 Solution White Paper
    VocalTec Architecture A Standards-based Platform for IP Telephony ______________________________________________________________________________________ VocalTec SS7 Solution White Paper Release 1.4 January 2001 VocalTec Communication Information in this document is subject to change without notice. This document may not be reproduced or transmitted in any form or by any means without the express written permission of VocalTec Communications Ltd. © 2001 VocalTec Communications Ltd. All rights reserved. VocalTec®, VocalTec Gatekeeper, VocalTec Telephony Gateway and VocalTec Network Manager are trademarks or registered trademarks of VocalTec Communications Ltd. All other trademarks are the property of their respective owners. SS7 White Paper, 3rd edition – January 2001 Headquarters Europe, Middle East and Africa Asia and Pacific Rim Israel Italy Hong Kong (HQ) 2 Maskit street Via Cassia 1081 Suite 2001, 20/F, Tower 1 Herzeliya 46733 00148 Rome Lippo Centre, 89 Queensway Israel Italy Admiralty, Hong Kong Tel: 972-9-970-7800 Tel: 39-06-302-60311 Tel: 852-2530-0452 Fax: 972-9-956-1867 Fax: 39-06-302-60312 Fax: 852-2801-4555 Americas France Australia USA 91 rue du Faubourg Saint-Honoré Level 21, Suite 34, Tower 2 One Executive Drive, Suite 320 75008 Paris 201 Sussex Street Fort Lee, NJ 07024-3393 France Sydney 2000, NSW USA Tel: 33-1-4471-3666 Australia Tel: 1-201-228-7000 Fax: 33-1-4471-3696 Tel: 61-2-9006-1310 Fax: 1-201-363-8986 Fax: 61-2-9006-1010 Germany China August-Bebel-Allee 6 Suite 815, Beijing Silver Tower D-53175 Bonn No. 2 San
    [Show full text]
  • SS7 Vulnerabilities
    Contents 1. Introduction ..................................................................................... 3 2. Market Drivers and Business Challenges ..................................5 2.1 History of SS7 ..................................................................................................................... 5 2.2 Evolution to Diameter ......................................................................................................... 6 3. SS7 Security Threats .....................................................................8 3.1 Requirements for carrying out an attack .................................................................. 8 3.2 Who is the Attacker? ........................................................................................................ 8 3.3 Types of Network / Subscriber Attacks ..................................................................... 9 3.3.1 Subscriber Identity Disclosure ......................................................................................... 9 3.3.2 Discovery of Subscribers Location .............................................................................. 13 3.3.3 Disruption of Subscribers Availability ........................................................................ 16 3.3.4 Intercepting SMS Messages ........................................................................................... 20 3.3.5 Manipulation of USSD Request ..................................................................................... 23 3.3.6 Manipulation
    [Show full text]
  • And SCTP-Based SS7 Implementations
    國 立 交 通 大 學 資訊工程系 碩 士 論 文 第七號信令系統信令在MTP與SCTP實作上的比較與分析 Comparison of MTP and SCTP for SS7 Signaling 研 究 生：黃偉哲 指導教授：林一平 教授 中 華 民 國 九 十 三 年 七 月 第七號信令系統信令在 MTP 與 SCTP 實作上的比較與分析 Comparison of MTP and SCTP for SS7 Signaling 研 究 生：黃偉哲 Student：Wei-Che Huang 指導教授：林一平 博士 Advisor：Dr. Yi-Bing Lin 國 立 交 通 大 學 資 訊 工 程 系 碩 士 論 文 A Thesis Submitted to Department of Computer Science and Information Engineering College of Electrical Engineering and Computer Science National Chiao Tung University in partial Fulfillment of the Requirements for the Degree of Master in Computer Science and Information Engineering July 2004 Hsinchu, Taiwan, Republic of China 中華民國九十三年七月 第七號信令系統信令在 MTP 與 SCTP 實作上的比較與分析 學生：黃偉哲 指導教授：林一平 博士 國立交通大學資訊工程學系碩士班 摘 要 第七號信令系統信令提供行動電信通訊網路控制與管理的功能。在現今的行動 網路，第七號信令系統信令是實作在以 Message Transfer Part 為基礎的網路上。但 在新的 Universal Mobile Telecommunication System (UMTS) all-IP 的架構下，第七號 信令系統信令將會被應用傳輸在 IP 網路。本論文即實作第七號信令系統信令在傳統 以 Message Transfer Part 為基礎的網路上的傳輸與在 UMTS all-IP 架構下 Stream Control Transmission Protocol 上的傳輸。我們並從訊息格式、連線準備與資料傳輸/ 回報這三個觀點來比較這兩種不同的方法，並以 3GPP TS 23.060 所定義的 Send Authentication Info 程序來測量分析這兩種方法實作的效能。 i Comparison of MTP and SCTP for SS7 Signaling Student: Wei-Che Huang Advisor: Prof. Yi-Bing Lin Department of Computer Science and Information Engineering National Chiao Tung University Abstract Signaling System Number 7 (SS7) signaling provides control and management functions in the mobile telecommunications network. Traditional SS7 signaling is implemented in Message Transfer Part-based network, which is utilized in the existing mobile networks. In Universal Mobile Telecommunication System (UMTS) all-IP architecture, the SS7 signaling transport will be carried by IP-based network.
    [Show full text]
  • PCS Network Signaling Using SS7
    Supporting interconnection with the PSTN PCS Network Signaling Using SS7 YI-BINGLIN AND STEVEN K. DEVRIES ersonal Communications Services this article is based on EIA,TIA IS-41 Revision B. We also describe , (PCS) facilitates the exchange of information (voice, data, video, some potential extensions of the IS-41 protocol based on a image, etc.) for mobile users independent of time, location, draft of IS-41Revision C. In this article, “IS-41.C”refers to EIAlTIA -and access arrangement. Tosupport PCS, mobile communications PN-2991, the Baseline Text Draft 3 9-2-94of IS-41 Revision C 1191. protocols such as EIWIAInterim Standard 41 (IS-41) 112-161 or Global System for Mobile Communications (GSM) [20] have been defined for PCS Network (PCN) inter-system oper- Signaling System No. 7 ations. To support interconnection between a PCN and the Public Switched Telephone Network (PSTN), it is essential ommon Channel Signaling (CCS) is a signaling method that the mobile communicationsprotocol interactswith the PSTN which provides control and management in the telephone signaling system for mobility management and call control. Cnetwork. CCS consists of supervisory functions, address- This article describes the interactions between a PCN and ing, and providing call information. A CCS channel conveys the PSTN in four aspects: messages to initiate and terminate calls, check on the status of some Interconnection Interfaces -What are the network inter- part of the network, and control the amount of traffic allowed. faces between a PCN and the PSTN? CCS uses a separate out-of-band signaling network to carry Message Routing - How is the information exchanged signaling messages.
    [Show full text]
  • Common Channel Signalling System No. 7 (SS7)
    Common Channel Signalling System No. 7 (SS7) MSc in Software Development Telecommunications Elective © Dr. Dirk H Pesch, Electronics Dept., CIT, 2000 1 Introduction • Common Channel Signalling System No. 7 (SS7) is data communications network standard • SS7 is intended to be used as a control and management network for telecommunication networks • SS7 provides call management, data base query, routing, flow and congestion control functionality for telecommunication networks • SS7 is specifically designed to support the functions of an Integrated Services Digital Network © Dr. Dirk H Pesch, Electronics Dept., CIT, 2000 2 Hierarchy of Telephone Networks Inter-carrier Exchange (ICX) ICX Tandem Exchange (TdX) Transit Exchange (TX) Local Exchange (LE) TdX TX TX LE LE LE LE © Dr. Dirk H Pesch, Electronics Dept., CIT, 2000 3 Signalling Transmission • DC Signalling – On-Off type digital signals • Tone Signalling – In-band or out-of-band signalling • Digital Control Signals – similar to on-off signals but represent bit sequences • Common Channel Signalling – digital signalling scheme between switches in the network © Dr. Dirk H Pesch, Electronics Dept., CIT, 2000 4 In -band and Out -of -band Signalling Voice channel In-band Out-of-band Output Voltage or Energy 0.3 1 2 3 4 5 Frequency in kHz © Dr. Dirk H Pesch, Electronics Dept., CIT, 2000 5 Common Channel Signalling Non-associated signalling Associated signalling Speech Signalling Switching points Signalling transfer points As public network become more complex and provide a richer set of services, the drawbacks of in-channel signalling become more apparent. The information transfer rate is quite limited and with inband signalling only available if there are no voice signals on the circuit.
    [Show full text]
  • Dialogic® DSI Protocol Stacks
    Datasheet Dialogic® DSI Protocol Stacks Dialogic® Distributed Signaling Interface (DSI) Protocol Stacks enable developers to build applications to interface directly to nodes within 2G and 3G mobile networks and wireline networks in areas such as mobility, messaging, location, authentication, charging, and call control. The versatile DSI Protocol Stacks support a range of Signaling System 7 (SS7) and IETF SIGTRAN specifications to provide proven software building blocks that implement the protocol stacks and provide a message-based API, allowing users access to protocol parameters without the need to implement the protocol procedures. A wide range of protocols are supported including MAP and IS-41 for mobile networks, INAP (including CAMEL and AIN) for intelligent networks, and ISUP (including BICC) for call control. These protocols run in conjunction with TCAP, SCCP (Connectionless or Connection Oriented) and underlying transport protocols M3UA, or MTP3 (over MTP2 or M2PA). Physical connectivity is achieved either over IP using SIGTRAN SCTP or using E1/T1 TDM interfaces in conjunction with Dialogic® DSI Network Interface Boards. The Dialogic® DSI SS7 Stack and Dialogic® DSI SIGTRAN Stack are complemented by the DSI run-time environment that coordinates inter-process communication, protocol configuration, management, logging, measurements, and run-time diagnostic tools. Features Benefits Proven worldwide deployment history with multiple operators Provides increased confidence that new deployments will work “out of the box” Common API
    [Show full text]
  • PDF Link and Select Save Target As
    Oracle® Communications EAGLE IS41 GSM Migration User©s Guide Release 46.1 E58711 Revision 1 January 2015 Oracle® Communications IS41 GSM Migration User's Guide, Release 46.1 Copyright © 1993, 2015, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable: U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs.
    [Show full text]