DOCSLIB.ORG

How to Recycle Holiday Wrapping Paper and What to Know About Disposing of Glittery Gift Wrap!!!

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
How to Recycle Holiday Wrapping Paper and What to Know About Disposing of Glittery Gift Wrap!!! How to recycle holiday wrapping paper and what to know about disposing of glittery gift wrap!!! Glitter wrapping paper is sparkly, shiny, and can really set the holiday mood for everyone. But here's the bad news: glitter gift wrap isn't safe to recycle. In fact, any wrapping paper that's laminated, decorated with colored foil, or glittery can't be recycled and must be sent to a landfill. This waste adds onto an estimated total of 25 million tons of extra trash that's created during the winter holidays — which usually start with Thanksgiving and ends by New Year's Day. "The fancier the wrapping paper, the less recyclable it is," says Jeremy Walters, the sustainability ambassador at Republic Services, to Mic. Republic Services is the second largest provider of waste disposal and recycling in the United States. "The challenge with the 'fancy' paper is that it simply isn’t all paper," he explains. "Glitter, foil, and cellophane are made of plastic or metallic materials, and it’s impossible to separate them for recycling." So all that glam and glitter means sparkly wrapping paper is actually part-paper and part-plastic or foil. Each component of the paper is so small and mixed up with other materials that it can't be sorted in the recycling facility. The glittery parts that are left in the landfills can end up contributing to the amount of microplastics that now pollute our food and water sources. "Only simple glitter-free, non-laminated wrapping paper can go in your recycling bin," he continues. But that doesn't mean all your glitter goods should be tossed out immediately. "Once the gifts are opened, you should save and reuse glitter- laden bags," Walters suggests. "This saves natural resources and can help you save money when the holidays come around next year." Gift givers should also try to reuse "cellophane wrapping paper, shiny bows, and ribbons because they can’t be recycled either." If you haven't bought your wrapping paper yet, consider more sustainable alternatives that are reusable, recyclable, or biodegradable. "When it comes time to wrapping gifts with sustainability in mind, take simple or creative approaches," recommends Walters. "For example, try wrapping gifts in brown craft paper, which is recyclable, and add a pinecone or sprig from your tree to give your gift wrap some rustic flair while being eco-friendly. For the kids, wrap their gifts in the comic section from the newspaper. As they eagerly wait to open their gifts, they can read their favorite comic strips." As with most sustainability efforts, it's best to use what you already have. Other crafters suggest using cloth or scarves to wrap any awkwardly shaped gifts. Reusing containers, like glass jars or tin boxes, can also serve as sturdy packaging without requiring you to buy more. According to Walters, other good, recyclable items to use are "cardboard and paper boxes, plain wrapping paper and paper gift bags, holiday cards and envelopes that don’t have embellishments like glitter and glued-on decorations," and sticky gift tags that are "affixed to an envelope or wrapping paper." Sticky gift tags are not recyclable on their own, however. If you're still concerned about the amount of holiday waste produced during this time of year, then glitter gift wrap isn't the only item to be wary of. Other festive items that can't be recycled include "bubble wrap, foam packaging, cellophane, plastic bags, holiday lights, tinsel, ribbons, laminated/coated gift bags, bows, artificial and real Christmas trees, batteries, food packaging and waste, clothing, shoes, and electronics." "We call this 'Santa’s Bad List,'" Walters adds. "If you can’t reuse or donate these items, put them in a waste container, not your recycling bin." .
Load more

Recommended publications
  • Food Packaging Technology
    FOOD PACKAGING TECHNOLOGY Edited by RICHARD COLES Consultant in Food Packaging, London DEREK MCDOWELL Head of Supply and Packaging Division Loughry College, Northern Ireland and MARK J. KIRWAN Consultant in Packaging Technology London Blackwell Publishing © 2003 by Blackwell Publishing Ltd Trademark Notice: Product or corporate names may be trademarks or registered Editorial Offices: trademarks, and are used only for identification 9600 Garsington Road, Oxford OX4 2DQ and explanation, without intent to infringe. Tel: +44 (0) 1865 776868 108 Cowley Road, Oxford OX4 1JF, UK First published 2003 Tel: +44 (0) 1865 791100 Blackwell Munksgaard, 1 Rosenørns Allè, Library of Congress Cataloging in P.O. Box 227, DK-1502 Copenhagen V, Publication Data Denmark A catalog record for this title is available Tel: +45 77 33 33 33 from the Library of Congress Blackwell Publishing Asia Pty Ltd, 550 Swanston Street, Carlton South, British Library Cataloguing in Victoria 3053, Australia Publication Data Tel: +61 (0)3 9347 0300 A catalogue record for this title is available Blackwell Publishing, 10 rue Casimir from the British Library Delavigne, 75006 Paris, France ISBN 1–84127–221–3 Tel: +33 1 53 10 33 10 Originated as Sheffield Academic Press Published in the USA and Canada (only) by Set in 10.5/12pt Times CRC Press LLC by Integra Software Services Pvt Ltd, 2000 Corporate Blvd., N.W. Pondicherry, India Boca Raton, FL 33431, USA Printed and bound in Great Britain, Orders from the USA and Canada (only) to using acid-free paper by CRC Press LLC MPG Books Ltd, Bodmin, Cornwall USA and Canada only: For further information on ISBN 0–8493–9788–X Blackwell Publishing, visit our website: The right of the Author to be identified as the www.blackwellpublishing.com Author of this Work has been asserted in accordance with the Copyright, Designs and Patents Act 1988.
    [Show full text]
  • Packaging Films and Meat Color
    PACUGIMS FILMS AND iVIE:AT COLO3” DUAXZ 0. VESTdRBZRG UNION CARBIDE: CORPORATION The subject for this morning’s talk is listed as packaging films and meat color, I have taken the liberty to broaden the area to be discussed since it is very difficult to pick out one quality factor and relate it alone to packaging films, I would rather title the talk as packaging films and meat quality. It is true that the color of meat is a very important factor in the marketability of a meat item but probably less important than other factors which can affect the quality of a product being sold by a manufacturer to his customers. It is true that in many cases meat color can reflect how the meat product has been treated during the normal manufacturing process and in the distribution and handling of the product to the display case where it is finally sold. On the other hand, one only has to look in the meat display case of the local supermarket to see the number of sophisticated packages and packaging techniques which have been developed through the cooperation of film manufacturer, equipment manufacturer, and meat packer to protect the quality of the meat item to the consumer. I have divided ny talk into three general areas, I plan to first discuss the requirements placed on the packaging material by the type of meat product being packaged, specifically fresh retail meat cuts, processed meats, and primal and subprimal neat cuts. Secondly, I will discuss the procedures available to film manufacturers to build in required filn properties for packaging the various types of meat.
    [Show full text]
  • Bio-Based and Biodegradable Plastics – Facts and Figures Focus on Food Packaging in the Netherlands
    Bio-based and biodegradable plastics – Facts and Figures Focus on food packaging in the Netherlands Martien van den Oever, Karin Molenveld, Maarten van der Zee, Harriëtte Bos Rapport nr. 1722 Bio-based and biodegradable plastics - Facts and Figures Focus on food packaging in the Netherlands Martien van den Oever, Karin Molenveld, Maarten van der Zee, Harriëtte Bos Report 1722 Colophon Title Bio-based and biodegradable plastics - Facts and Figures Author(s) Martien van den Oever, Karin Molenveld, Maarten van der Zee, Harriëtte Bos Number Wageningen Food & Biobased Research number 1722 ISBN-number 978-94-6343-121-7 DOI http://dx.doi.org/10.18174/408350 Date of publication April 2017 Version Concept Confidentiality No/yes+date of expiration OPD code OPD code Approved by Christiaan Bolck Review Intern Name reviewer Christaan Bolck Sponsor RVO.nl + Dutch Ministry of Economic Affairs Client RVO.nl + Dutch Ministry of Economic Affairs Wageningen Food & Biobased Research P.O. Box 17 NL-6700 AA Wageningen Tel: +31 (0)317 480 084 E-mail: [email protected] Internet: www.wur.nl/foodandbiobased-research © Wageningen Food & Biobased Research, institute within the legal entity Stichting Wageningen Research All rights reserved. No part of this publication may be reproduced, stored in a retrieval system of any nature, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publisher. The publisher does not accept any liability for inaccuracies in this report. 2 © Wageningen Food & Biobased Research, institute within the legal entity Stichting Wageningen Research Preface For over 25 years Wageningen Food & Biobased Research (WFBR) is involved in research and development of bio-based materials and products.
    [Show full text]
  • Keeping Food and Water Safe Before, During and After a Disaster
    Keeping Food and Water Safe Before, During and After a Disaster Emergency Water Supply Emergency Supply of Water Having an ample supply of clean To prepare the safest and most reliable emergency supply water is a top priority in an emergency. A of water, it is recommended that you purchase commercially normally active person needs to drink at bottled water. Keep bottled water in its original container, and least two quarts (half gallon) of water each do not open it until you need to use it. day. People in hot environments, children, If you are preparing your own containers of water, use nursing mothers and ill people will require food-grade water storage containers obtained from a variety of even more. You will also need water for sources, including surplus or camping supplies stores for water food preparation and hygiene. Store at storage. If you decide to re-use storage containers, choose least one gallon per person and pet per two-liter plastic soft drink bottles – not plastic jugs or cardboard day for drinking, cooking and personal containers that have had milk or fruit juice in them. The reason hygiene. Consider storing at least a two- is that milk protein and fruit sugars cannot be adequately week supply of water for each member removed from these containers and provide an environment for of your family. If you are unable to store bacterial growth when water is stored in them. Cardboard con- this quantity, store as much as you can. If tainers leak easily and are not designed for long-term storage supplies run low, never ration water.
    [Show full text]
  • DS 8-1 Commodity Classification (Data Sheet)
    FM Global Property Loss Prevention Data Sheets 8-1 April 2014 Interim Revision April 2020 Page1of23 COMMODITY CLASSIFICATION Table of Contents Page 1.0 SCOPE ................................................................................................................................................... 3 1.1 Hazards ............................................................................................................................................. 3 1.2 Changes ............................................................................................................................................ 3 2.0 LOSS PREVENTION RECOMMENDATIONS ....................................................................................... 3 2.1 General ............................................................................................................................................. 3 2.2 Commodity Classification .................................................................................................................. 3 2.2.1 Noncombustible ....................................................................................................................... 4 2.2.2 Class 1 ..................................................................................................................................... 4 2.2.3 Class 2 ..................................................................................................................................... 4 2.2.4 Class 3 ....................................................................................................................................
    [Show full text]
  • Packaging and Price-Marking Produce in Retail Food Stores
    Historic, archived document Do not assume content reflects current scientific knowledge, policies, or practices. ^Q^Tnt / Packaging Produce in A Study of Improved Methods of Marketing Agricultural Products Marketing Research Report No. 278 U. S. DEPARTMENT OF AGRICULTURE AGRICULTURAL MARKETING SERVICE Marketing Research Division — PREFACE This study of packaging and price-marking produce in retail food stores is part of a broad program of research aimed at reducing the cost of marketing farm products, including development of methods of increasing the efficiency of food -wholesaling and retailing. The estimated total labor cost for operating produce departments in retail food stores was kOO million dollars in 1957 • In the 5 years preceding 1957 average wage rates in food stores increased about one-fourth. The methods and procedures described in this study, when adopted, will materially help to increase productivity of labor and increase the effective- ness and acceptability of self-service in food stores. As self-service holds down retailing costs, their burden on both producers and consumers is reduced, and the often wide spread between what the farmer gets for a commodity and what the consumer pays for it can be minimized. Increases in marketing costs are normally reflected back to the farmer in lower returns, or to the consumer in higher prices, or both, as competition among traders gradually adjusts costs and margin levels. Reduction of these costs, therefore, can benefit all the factors in the food and fiber industries producers, processors, distributors, and consumers. ACKNOWLEDGMENTS Personnel of Food Fair, Inc., Florida Division; Perm Fruit Co., Philadelphia, Pa.; Publix Markets, lakeland, Fla.; Red Owl Stores, Inc., Hopkins, Minn.; and Super Valu Stores, Hopkins, Minn., built and installed equipment and allowed researchers to use the stores as laboratories for this study.
    [Show full text]
  • Safe Food Storage and Consumption Guidelines
    Safe Food Storage and Consumption Guidelines For the Home Utah Food Bank Revised 10/07/2011 Page 1 of 12 Storage and Consumption Guidelines Code Dating Terms Use of Good Judgment : The following guidelines describe general safe storage and consumption recommendations once the product is in the home. Although based on research, these guidelines are only recommendations, not hard fast rules. Food safety within the home should be done on a case by case basis based on visual quality and the storage condition of the product. Any signs of damage or deterioration supersede any and all of these guidelines. Remember to use good judgment. If in doubt, throw it out. Discarding unsafe or suspect food is not waste; it is helping to protect human health. Shelf Life The length of time a product can be kept for use before quality considerations make it necessary or desirable to discard it. The determination of a products maximum shelf life is based upon the unopened condition and proper storage of that product. Any other storage condition, ones not meeting the strict recommendations of the product will reduce the shelf life and possible safety of that product. Code Dating Packaging numbers printed by the manufacturer. Coded information on products may include date of packaging, plant location, lot number etc. There are no uniform or universal standards for code dating. Each manufacturer can use a different standard. (Some products may need to be thrown away after the date on the package; other products may be good for many years past the printed code date). For more product specific information, contact the manufacturer of the product.
    [Show full text]
  • March 2021 1 CELLOPHANE This Dossier on Cellophane
    CELLOPHANE This dossier on cellophane presents the most critical studies pertinent to the risk assessment of its use in drilling muds and as a cement additive chemical. It does not represent an exhaustive or critical review of all available data. The information presented in this dossier was obtained primarily from the ECHA database that provides information on chemicals that have been registered under the EU REACH (ECHA). Where possible, study quality was evaluated using the Klimisch scoring system (Klimisch et al., 1997). Screening Assessment Conclusion – Cellophane is classified as a tier 1 chemical and requires a hazard assessment only. 1 BACKGROUND Cellophane is a thin, transparent sheet made of regenerated cellulose. Its low permeability to air, oils, greases, bacteria and water makes it useful for food packaging. Cellophane is highly permeable to water vapour, but may be coated with nitrocellulose lacquer to prevent this. As well as food packaging, cellophane is used in transparent pressure-sensitive tape, tubing and many other similar applications. Unlike many other similar materials, cellophane is biodegradable. Cellophane is produced from cellulose from wood, cotton, hemp or other sources. It is dissolved in alkali and carbon disulfide to make a solution called viscose, which is then extruded through a slit into a bath of dilute sulfuric acid and sodium sulfate to reconvert the viscose into cellulose. The film is then passed through several more baths, one to remove sulfur, one to bleach the film, and one to add softening materials such as glycerin to prevent the film from becoming brittle. A similar process, using a hole (a spinneret) instead of a slit, is used to make a fibre called rayon.
    [Show full text]
  • Space Food and Nutrition: an Educator's Guide with Activities in Science and Mathematics. INSTITUTION National Aeronautics and Space Administration, Washington, DC
    DOCUMENT RESUME ED 448 036 SE 064 328 AUTHOR Casaburri, Angelo A.; Gardner, Cathy A. TITLE Space Food and Nutrition: An Educator's Guide with Activities in Science and Mathematics. INSTITUTION National Aeronautics and Space Administration, Washington, DC. REPORT NO NASA-NNEG-1999-02-115-HQ PUB DATE 1999-00-00 NOTE 60p.; Edited by Jane A. George. Guide produced for grades K-8. AVAILABLE FROM For full text: http://spacelink.nasa.gov/products. PUB TYPE Guides - Classroom Teacher (052) EDRS PRICE MF01/PC03 Plus Postage. DESCRIPTORS Elementary Secondary Education; *Experiential Learning; *Food; Science Activities; *Space Sciences ABSTRACT From John Glenn's mission to orbit Earth to the International Space Station program, space food research has met the challenge of providing food that tastes good and travels well in space. Early food dehydration was achieved by cutting meat, fish, and certain fruits into thin strips and drying them in sunlight. Rubbing food with salt or,soaking it in salt water, an early form of curing food, also helped preserve it. Later techniques were developed for cooking, processing, preserving, and storing food in sealed containers. With the developments of pasteurization and canning, a much larger variety of foods could be stored and carried on long journeys. More recently, refrigeration and quick-freezing have been used to help preserve food flavor and nutrients and prevent spoilage. While these forms of packaged food products are fine for travel on Earth, they are not always suitable for use on space flights. There are limitations to weight and volume when traveling, and the microgravity conditions experienced in space also affect the food packaging.
    [Show full text]
  • OZCO Product Specs for 57705 HA-WBH Bottle Holder
    Product & Packaging Specs OWT Hardware Accessory - Wine Bottle Holder (HA-WBH) Item #: 57705 ITEM NO. QTY. PART NUMBER DESCRIPTION OWT Hardware Accessory - Wine Bottle 1 1 57705-01 Holder Bracket OWT Hardware Accessory - Wine Bottle 2 1 57705-02 Holder Cap 3 2 Screw Screw, .25-20 x .5 SS Black 30 111 Screw, .25-20 x .375 Torx Black with Locking 1.19 4.38 42 Screw Patch 5 1 57705-11 Wick Holder, Wine Bottle Holder (HA-WBH) 6 3 o-rings series .070 7 1 57705-12 Wick, Wine Bottle Holder (HA-WBH) 7 4 5 64 2.50 1 [61] 6 61 64 2.39 2.39 30 2.50 1.19 3 2 [111] items 5-7 4.38 not shown Weight: 1.84 LBS Scale: 1:2 Last updated: 2/7/2018 57705 V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/7/2018 . This information is updated periodically and should not be relied upon after 2 years from 2/7/2018 . Please visit OZCOBP.com to get current information. 1 Product & Packaging Specs OWT Hardware Accessory - Wine Bottle Holder (HA-WBH) Item #: 57705 Weight: 1.84 LBS Scale: 1:2.5 Last updated: 2/7/2018 57705 V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/7/2018 . This information is updated periodically and should not be relied upon after 2 years from 2/7/2018 . Please visit OZCOBP.com to get current information. 2 Product & Packaging Specs OWT Hardware Accessory - Wine Bottle Holder (HA-WBH) Item #: 57705 Weight: 1.84 LBS Scale: 1:2.5 Last updated: 2/7/2018 57705 V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/7/2018 .
    [Show full text]
  • Buying Into Bioplastics: Starch Based Bioplastic for Food Packaging
    BUYING INTO BIOPLASTICS: STARCH BASED BIOPLASTIC FOR FOOD PACKAGING Maya Román, Reagan Dowling, John Christiano PLASTICS IN FOOD STARCH BASED PLASTICS Petroleum-Based Plastic Starch-Based Bioplastic ● The first plastic used in FCMs was Cellophane ● Bioplastic: plastic derived from natural Base Natural gas or crude oil: Corn and other vegetables: based on celluloid, the first synthetic materials and degrades when exposed to Materials Non-Renewable Renewable polymer, in 1927. environmental conditions ● Bakelite was the first completely synthetic ● Starch bioplastic derived from starch-based Disposal Limited recycling Landfills, Composting, plastic, used in a wide range of applications. polymers found in vegetables like corn and Landfills/Oceans Potentially Recyclable ● Plastic disposables became mainstream by potatoes the 1960s, as Saran Wrap, Styrofoam, Ziploc ● Fully biodegradable - Have little to no Post Breaks down extremely slowly Compost, off gassing methane (a bags, and microwave dinner trays, among environmental impact Disposal and harmfully greenhouse gas) other applications. ● Strong, lightweight, malleable ● Plasticware is a cheaper, safer alternative for Water Immense amounts of water in Still uses large amounts of water ● Number of food companies using starch restaurants compared to reusable options. Use both fuel extraction and to grow the crops bioplastic growing exponentially. Ex: Ecoware ● Plastics make up the sixth largest industry, in processing into plastic the US, consisting of 989,000 employees, and PRODUCTION STEPS: with a shipment value of $432.3 billion in Cost Extremely cheap for food Still in development, much 2016. Extraction Production of Polymer processing packaging pricier than petroleum of starch polymers (with extruder) counterpart FOOD PACKAGING’S Food BPA and similar chemicals can Excessive water in or on the BEST CHOICE Safety leach out of containers into packaging will lead to food and drink breakdown Neither petroleum-based nor bioplastics are perfect solutions.
    [Show full text]
  • Coated and Uncoated Cellophane As Materials for Microplates and Open
    Lab on a Chip View Article Online COMMUNICATION View Journal | View Issue Coated and uncoated cellophane as materials for microplates and open-channel microfluidics Cite this: Lab Chip,2016,16,3885 devices† Received 30th July 2016, Accepted 19th September 2016 Mahiar M. Hamedi,‡a Barış Ünal,‡a Emily Kerr,ab Ana C. Glavan,a M. Teresa Fernandez-Abedulc and George M. Whitesides*ad DOI: 10.1039/c6lc00975a www.rsc.org/loc – This communication describes the use of uncoated cellophane of diagnostics.1 5 Paper has three characteristics that differen- (regenerated cellulose films) for the fabrication of microplates, and tiate it from glass, elastomers (e.g. PDMS), and synthetic poly- the use of coated cellophane for the fabrication of open-channel mers (e.g. polycarbonate) as a material for microfluidics: i) it microfluidic devices. The microplates based on uncoated cello- is porous and hydrophilic: porosity allows for immobilization phane are particularly interesting for applications that require high of biomolecules inside the pores of paper, and hydrophilicity transparency in the ultraviolet (UV) regime, and offer a low-cost allows spontaneous wicking of water which is useful for alternative to expensive quartz-well plates. Uncoated cellophane is microfluidic applications. ii) Printing of hydrophobic regions also resistant to damage by various solvents. The microfluidic de- into paper (e.g. using wax printing), and stacking of paper vices, based on coated cellophane, can have features with dimen- sheets, enable the fabrication of three-dimensional paper sions as small as 500 μm, and complex, non-planar geometries. microfluidic devices.6 Printing of electronic inks on the sur- Electrodes can be printed on the surface of the coated cellophane, face of, or inside, paper allows the fabrication of electroana- and embedded in microfluidic devices, to develop resistive heaters lytical paper devices.3,7 iii) It is safe during handling and dis- and electroanalytical devices for flow injection analysis, and con- posal, (e.g.
    [Show full text]