C-5050 Zoom Quick Start Guide

Total Page:16

File Type:pdf, Size:1020Kb

C-5050 Zoom Quick Start Guide qsge_pquick.fm Page 1 Tuesday, September 17, 2002 1:43 PM 1. Attaching the strap and lens cap 3. Loading the batteries 4. Inserting an xD-Picture Card 1 Pass the lens cap string through the hole in 1 Make sure the power switch is set to OFF. 1 Make sure the power switch is set to OFF. DIGITAL CAMERA the lens cap. C-5050ZOOM 2 Slide the battery compartment lock from to . 2 Open the card cover. 3 Place your finger on the mark and slide the Quick start guide battery compartment cover in the direction of , We’ve included this convenient Quick start guide to show you basic functions and 2 Fasten the strap to the strap eyelet as shown Strap eyelet then lift in the direction of . techniques that will help you quickly master your new camera. For more detailed in the diagram. • Use the ball of your finger to slide the cover. Do not use descriptions of procedures, as well as for additional information on more sophisticated your fingernail as this could result in injury. features not covered here, please refer to the printed “Basic Manual”, or the primary “Reference Manual” on the CD-ROM. 3 Insert a card. • Hold the card straight and insert it correctly into the xD-Picture Card/SmartMedia slot, as shown. Package contents • An illustration showing the position for inserting the xD-Picture Camera Software installation guide (included in 3 Adjust the strap to the desired length. Pull Card is next to the slot. Strap the CD-ROM package) the strap through the stopper ( ) and make 4 Close the card cover securely until it clicks. Lens cap/String CD-ROM with Windows 98 USB driver sure it is fastened securely. 4 Insert the batteries, making sure that they are correctly oriented as shown NiMH batteries (rechargeable)/ software, Reference manual, and more. in the illustration. Battery charger/instruction (Olympus Warranty card/Registration card (not America and Olympus Europa only) provided in some areas) When using AA (R6) batteries When using CR-V3 lithium battery packs USB cable Safety Precautions (booklet) AV cable xD-Picture Card Ejecting the card Basic manual xD-Picture Card instructions ;Quick start guide Remote control (Olympus America only) 1 Push the card all the way in to unlock it, then let it return Remote control instruction (Olympus 4 Attach the strap to the other eyelet in the same way. slowly. America only) Battery alignment The card is ejected a short way and then stops. Hold the OLYMPUS AMERICA INC. card straight and pull it out. Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000 24/7 online automated help: http://support.olympusamerica.com/ 2. Taking off the lens cap The correct way to insert the AA batteries Note Phone customer support: Tel. 1-888-553-4448 (Toll-free) is indicated on the bottom of the camera. Our phone customer support is available from 8 am to 10 pm (Monday to Friday) ET Releasing your finger quickly after pushing the E-Mail: [email protected] When you want to take pictures, be sure to remove the 5 Close the battery compartment cover, card all the way in may cause it to eject forcefully Olympus software updates can be obtained at: http://olympus.com/digital/ lens cap before turning on the camera. then press it down and slide it in the out of the slot. OLYMPUS OPTICAL CO. (EUROPA) GMBH. direction shown . • Press the center of the cover, as it may be difficult to Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany close properly by pressing the edge. Tel. 040-237730 • The xD-Picture Card and SmartMedia use the same slot, as do Compact Flash and • Make sure the cover is closed securely. Letters: Postfach 10 49 08, 20034 Hamburg, Germany Microdrive. Two cards cannot be inserted in the one slot at the same time. Note • Never open the card cover, or remove the card or the batteries while the camera is turned on. Doing so could destroy the data stored on the card. 6 Slide the battery compartment lock from to . Once destroyed, data cannot be restored. http://www.olympus.com/ Printed in Japan 1AG6P1P1441-- VT406901 Taking still pictures Viewing still pictures Recording movies Protecting pictures 1 Set the mode dial to and turn the power 1 Set the mode dial to and turn the power 1 Set the mode dial to and turn the power switch so that ON is aligned You are recommended to protect important pictures to avoid accidentally erasing switch so that ON is aligned with the white Mode dial switch so that ON is aligned with the white Mode dial with the white line. them. line. line. • The monitor turns on and the available recording time on the card that you are using 1 Use the arrow pad or jog dial to display • The monitor turns on and displays the last picture is displayed. Protect button taken. (Single-frame playback) the picture you want to protect. 2 Decide the composition while looking at the image on the monitor. “Viewing still pictures” Quick View 3 Press the shutter button fully to start recording. • The orange lamp on the right of the viewfinder lights. 2 Press . Pictures can be played back by pressing • During movie recording, lights red. • The mark appears on protected twice quickly (double-click) even pictures. when the mode dial is set to a mode other 4 Press the shutter button again to stop recording. • To cancel protection, press again. than . Power switch Power switch Viewing movies Erasing pictures (Single-frame erase) 1 Set the mode dial to and turn the power switch so that ON is aligned with the white line. 1 Use the arrow pad or jog dial to display 2 Position the AF target mark in the • The monitor turns on. the picture you want to erase. viewfinder on the subject. Orange 2 Use the arrow pad or jog dial to play back other pictures. 2 Use the arrow pad or jog dial to display the picture with you want to “Viewing still pictures” lamp Arrow pad play back. Jumps to the picture 10 frames back. Green 3 Press . lamp • The top menu is displayed. AF target mark 4 Press to select MOVIE PLAY. Erase button Displays the previous Displays the next Press to select MOVIE PLAYBACK, then 2 Press . 3 Press the shutter button gently (halfway) to adjust the picture. picture. 5 MOVIE PLAY ERASE focus. press . • The ERASE screen is displayed. INFO MODE MENU • When the focus and exposure are locked, the green lamp lights. • The movie is played back. When playback ends, the 3 Press to select YES, then press . YES Jumps to the picture 10 frames ahead. • If the orange lamp lights, the flash fires automatically. display automatically returns to the beginning of the • The picture is erased and the menu is closed. movie. NO 4 Press the shutter button all the way (fully). • The camera takes the picture. 6 Press again after playback ends to display SELECt GO • The card access lamp blinks while the picture is stored on the Jog dial the menu. card. Displays the previous Displays the next Press to select the desired operation, then press . • When the green lamp stops blinking, you can take the next picture. picture. PLAYBACK : Plays back the entire movie again. picture. FRAME BY FRAME : Plays back the movie manually one frame at a time. EXIT : Leaves the movie playback mode. To turn off the camera Turn the power switch so that OFF is aligned with the white line. qsge_pquick.fm Page 2 Tuesday, September 17, 2002 1:43 PM Buttons and dials Menu functions Viewfinder AEL button (AEL) 12Press . Use the arrow pad to select a 3Press to select a tab. 4Press to enter menu. Orange lamp Fixes the exposure. The lock function is : Shooting functions menu. alternately activated and canceled each : Playback functions Green lamp time you press the button. DRIVE DRIVE CAMERA tab CAMERA ISO AF target mark PICTURE tab Erase button ( ) MODE MENU MY MODE Erases a selected picture. CARD tab FLASH IN+IN+ WB CARD SLOW SSLOW1LOW1 SETUP tab SEt PIC Power switch Arrow pad ( ) Top menu When MODE MENU is selected in the top menu. Turns the camera on/off. OK/Menu button Jog dial PIXEL MAPPING Checks the CCD and image processing functions for errors. • Sets the aperture value and shutter speed when the mode dial is in A/S/M. Shooting menu functions • Can be used in combination with other buttons to set functions. Adjusts the brightness of the monitor. Sets the date and time. • Selects playback image. (During movie recording) m/ft Sets the measurement unit (m/ft) used during manual focus. Records sound when shooting a movie. VIDEO OUT Selects NTSC or PAL according to your TV’s video signal type. TV video signal types differ depending on the region. Monitor button (Quick View ) CAMERA tab SHORT CUT Lets you assign frequently used functions as shortcut menus. • Turns the monitor on/off. Selects a shooting mode from (single-frame shooting), CUSTOM BUTTON Lets you assign a frequently used function to the camera’s • Double-click to change from shooting mode to playback mode. (high speed sequential shooting), (sequential DRIVE custom button. shooting), (AF sequential shooting) and BKT (auto Arrow pad ( ) bracketing). DUAL CONTROL Displays the same information on the control panel as on the PANEL monitor when the monitor is not in use. • Sets functions on the menu screen. ISO Selects the ISO sensitivity from AUTO, 64, 100, 200 and 400.
Recommended publications
  • The Panasonic Lumix FZ80/82 New User's Guide
    The Panasonic Lumix FZ80/82 New User’s Guide Graham Houghton August 2018 The Panasonic Lumix FZ80/82 User’s Guide 1 Table of Contents Preface ............................................................................................................................................................ 3 The iA Intelligent Auto Mode ........................................................................................................................... 5 Auto Focus, Face/Eye Detection and Face Recognition ...................................................................................... 6 Menu Items Adjustable in the iA+ Mode ......................................................................................................... 12 Taking Images Using the Program Auto Exposure Mode (P) ............................................................................. 13 Taking Images Using the Aperture Priority Mode ............................................................................................ 14 Taking Images Using the Shutter Priority Mode............................................................................................... 15 Taking Images Using the Fully Manual Exposure Mode.................................................................................... 16 Using the Constant Preview Mode in Manual Mode ........................................................................................ 17 Assigning One Push AE in the Manual Exposure Mode ...................................................................................
    [Show full text]
  • Cyber-Shot Handbook
    VCLICK! Table of contents Basic Operations Using functions for shooting Using functions for Digital Still Camera viewing Cyber-shot Handbook Customizing the settings DSC-H7/H9 Before operating the unit, please read this Handbook thoroughly together with the Viewing images on a TV “Instruction Manual” and the “Cyber-shot Step-up Guide”, and retain them for future reference. Using your computer Printing still images Troubleshooting Others Index © 2007 Sony Corporation 3-196-620-12(1) GB Notes on using your camera Types of “Memory Stick” that can be • For details on the usable battery pack, see used (not supplied) page 131. The IC recording medium used by this Carl Zeiss lens camera is a “Memory Stick Duo”. There are This camera is equipped with a Carl Zeiss two types of “Memory Stick”. lens which is capable of reproducing sharp “Memory Stick Duo”: you can use a images with excellent contrast. “Memory Stick Duo” with your camera. The lens for this camera has been produced under a quality assurance system certified by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany. Notes on the LCD screen, the LCD finder “Memory Stick”: you cannot use a and the lens “Memory Stick” with your camera. • The LCD screen and the LCD finder are manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen or the Other memory cards cannot be used.
    [Show full text]
  • Cyber-Shot Handbook DSC-HX1
    contents Table of Operation Search MENU/Settings MENU/Settings Search Index Cyber-shot Handbook DSC-HX1 GB © 2009 Sony Corporation 4-132-054-11(1) How to use this handbook contents Table of Click on a button at upper right to jump to the corresponding page. This is convenient when searching for a function you want to view. contents Table of Search for information by function. Operation Search Operation Search Search for information by operation. MENU/Settings Search Search for information in a listing of MENU/Settings items. MENU/Settings MENU/Settings Index Search for information by keyword. Search Marks and notations used in this handbook In this handbook, the sequence of operations is shown by arrows (t). Operate the camera in the order indicated. Index Marks are shown as they appear in the camera’s default setting. The default setting is indicated by . Indicates cautions and limitations relevant to the correct operation of the camera. Indicates information that is useful to know. 2GB Notes on using the camera contents Table of Notes on the types of “Memory Stick” Notes on the LCD screen, the LCD media that you can use (sold finder and lens separately) • The LCD screen and the LCD finder are “Memory Stick Duo” media: manufactured using extremely high-precision You can use a “Memory Stick technology so over 99.99% of the pixels are Duo” media with the camera. operational for effective use. However, some tiny black and/or bright dots (white, red, blue or Operation Search “Memory Stick” green) may appear on the LCD screen.
    [Show full text]
  • Nikon Setting Guide
    Professional Setting Guide — For Still Photography — En Table of Contents Landscapes 5 Basic Settings for Landscape Photography ................... 6 • Focus Mode: Choose “Single AF” (AF ‑S) and “Single-Point AF”! ........................................................................7 • Vibration Reduction: Choose “Normal” for Hand‑Held Photography! ..............................................................7 • Silent Photography: Choose “On”! ..............................................9 • Low‑Light AF: Choose “On”! .......................................................10 • Exposure Delay Mode: Choose “1 s”! ........................................10 • Monitor Mode: Choose “Monitor Only”!...............................11 Custom Controls for Landscape Photography ............ 12 • q Preview ......................................................................................13 • b Framing Grid Display ..............................................................13 • K Select Center Focus Point ...................................................13 • b Live View Info Display Off ..................................................13 • Shooting Mode > p Zoom On/Off ...........................................14 • Playback Mode > p Zoom On/Off ............................................14 Portraits 15 Basic Settings for Portrait Photography ....................... 16 • Set Picture Control: Choose “Portrait”! ..................................16 • Focus Mode: Choose “Continuous AF” (AF ‑C)! ....................16 • AF‑Area Mode: Choose
    [Show full text]
  • Quick Reference Guide
    Quick Start Guide Insert the battery. Flip out the LCD Image Playback 1 6 monitor. yuyu Insert a SD card. Focus the subject. 2 7 Aim the viewfinder center over the subject and press the shutter button halfway to autofocus. Index Magnify White index Red index Attach the lens. Take the picture. Quick Reference Guide 3 Align the lens’ white or red 8 Press the shutter button S index with the camera’s completely to take the Select image index in the matching color. picture. x Playback This quick reference guide explains the basic Set the lens focus View the image. LErase B Shooting information function settings and how to shoot and play back 4 mode switch to <f>. 9 The captured image will be images. You can take this guide with you when displayed for 2 sec. on the shooting. For detailed instructions, refer to the LCD monitor. EOS REBEL T4i/EOS 650D Instruction Manual. Set the power switch The M on the right of the function indicates that the function is 5 to <1>, and set the available only in Creative Zone modes (d,s,f,a). Battery Life with Viewfinder Shooting E Mode Dial to <A> English (Scene Intelligent Auto). Temperature No Flash 50% Flash Use CPQ-E042-000 © CANON INC. 2012 At 23°C / 73°F Approx. 550 shots Approx. 440 shots Preparation Menu Operations Image-Recording Quality Q Quick Control Touch Screen Select [z1: Image quality], then press <0>. Press the <Q> button. The LCD monitor is a <M> Press the <U> key to select the quality, then press <0>.
    [Show full text]
  • Topic 1 Commanding the Mode Dial
    Working with your Camera Topic 1 – Commanding the Mode Dial Learning Outcomes In this topic, you will learn more about how to control the functions on your mode dial. We touched on this before but I want to go through these in detail so that you will be better equipped with the language when we move onto shutter speed, ISO and aperture in future topics. The Mode Dial Pre-sets and modes bind you to their predetermined results. That’s not to say that these modes will give you bad photographs, in fact, you can get some pretty nice shots through using these pre-sets. However, there will be times in which you want more control of the camera and that is why we encourage better understanding of the camera’s settings so that you know how your camera will behave in certain environments. Page | 1 Working with your Camera Automatic Mode Auto mode: The camera controls all aspects of the camera, shutter speed, aperture, ISO in order to achieve a good exposure. This mode is useful when we are new to photography but through practice, you will gain the confidence and skill to move on from here. It is labelled by green text or a green box and is usually called AUTO which is good for first time users as it is self-explanatory, like most of the modes. Page | 2 Working with your Camera Program Mode Program Mode: The camera controls most aspects of the camera, namely shutter speed, aperture and ISO in order to achieve a good exposure.
    [Show full text]
  • Aperture Priority Mode
    PHOTOGRAPHER’S GUIDE TO THE LEICA D-LUX 5 particular aperture or shutter speed at the outset. If you need that degree of control, you’ll need to select Aperture Priority, Shutter Priority, or Manual for your shooting mode. There is one specific issue related to the lack of control over aperture and shutter speed when you’re using Program mode. When that shooting mode is set, the Minimum Shutter Speed setting will be activated; you cannot turn it off. The slowest minimum shutter speed you can set in that situation is one second. So if you are trying to take a time exposure in a dark area (using a tripod, presumably), where the correct shutter speed would be, say, five seconds, the camera will not expose the picture properly. The minimum shutter speed setting of one second will be the longest exposure possible. If you expect to have exposures longer than one second, you need to select a shooting mode other than Program. (Namely, Manual, Aper- ture Priority, Shutter Priority, or certain Scene types.) Aperture Priority Mode You set this shooting mode by turning the Mode dial to the capital “A” that stands alone, not the “A” inside the camera icon. This mode is similar toProgram mode in the functions that are available for you to control, but, as the name implies, it also gives you, the photographer, more control over the cam- era’s aperture. Before discussing the nuts and bolts of the settings for this mode, let’s talk about what aperture is and why you would want to control it.
    [Show full text]
  • Installing the Software Loading the Batteries
    ᕡ Installing the software ENGLISH Before connecting any cables, install the software that was included with your camera. Follow the on-screen instructions. After installing the software, return to this Getting Started Guide. ᕢ Loading the batteries Kodak lithium digital Kodak Li-Ion camera battery CRV3 rechargeable digital AA lithium (non-rechargeable) camera battery batteries KLIC-8000 www.kodak.com/go/z712support 1 ENGLISH ᕣ Turning on the camera ᕤ Setting the language, date/time Language: 1 to change. 2 OK to accept. Date/Time: 1 At the prompt, press OK. OK 2 to change. for previous/next field. OK to accept. 2 www.kodak.com/go/easysharecenter ᕥ Taking a picture/video ENGLISH Pictures Videos 1 1 2 Press the EVF/LCD button to turn on LCD or EVF (electronic viewfinder). EVF EVF LCD LCD AF/AE indicator 3 Press the Shutter button halfway 3 Press the Shutter button to focus and set exposure. completely down and release. When the AF/AE indicator turns To stop recording, press the green, press the Shutter button Shutter button again. completely down. www.kodak.com/go/z712support 3 ENGLISH ᕦ Reviewing pictures/videos 1 Press Review. (Press again to exit.) 2 for previous/next picture/video. Videos: Play/pause. 2X, 4X, 8X forward Adjust the volume. 2X reverse ᕧ Transferring pictures/videos USB cable Kodak EasyShare printer dock or camera dock (May be sold separately.) 1 2 For dock compatibility, visit www.kodak.com/go/dockcompatibility. To purchase accessories, visit www.kodak.com/go/z712accessories. To use an EasyShare dock, see its Getting Started Guide.
    [Show full text]
  • Camera Settings Guide
    Camera Settings Guide • " " and " " are trademarks or registered trademarks of Sony Corporation. • All other company and product names mentioned herein are used for identification purposes only and may be the trademarks or registered trademarks of their respective owners. TM and ® symbols are not included in this booklet. • Screen displays and effects used to illustrate some functions are simulated. Conventional autofocus has until now dealt with space alone. Sony goes one step further — a big step, with an innovative image sensor that picks up both space and time to capture moving subjects with new clarity. Sony spells the beginning of a new autofocus era. 4D FOCUS allows you to take crisper photos than ever. Plain old autofocus is a thing of the past. The future of photography is in motion. What is 4D FOCUS? Space: 3D Time: 4D 4D FOCUS Area Depth Time Wide Fast Steadfast The wide AF area, covering nearly the Fast Hybrid AF, combining phase- An advanced AF algorithm accurately entire frame, allows focusing on a detection AF and contrast-detection AF, predicts subject’s next move. Precise AF subject positioned even off the center instantly detects distance to the subject tracking allows focus to be maintained of the frame. to focus accurately. even on fast-moving subjects. Meeting your focusing demands Basic AF performance of Wide Fast Steadfast Focusing over wide area Instant focusing! Once it's focused, it never lets go The 6000 employs a focal plane phase- Advanced Fast Hybrid AF combines phase- With Focus Mode set to AF-C, the camera detection AF sensor with 179 AF points spread detection AF and contrast-detection AF to achieve displays one or more small green frames to cover nearly the entire frame.
    [Show full text]
  • Owner's Manual (PDF: )
    Owner’s Manual BL00005018-202 EN Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents be- fore using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information The latest versions of the manuals are available from: http://fujifilm-dsc.com/en/manual/ The site can be accessed not only from your computer but also from smartphones and tablets. It also contains information on the software license. For information on fi rmware updates, visit: http://www.fujifilm.com/support/digital_cameras/software/ ii P Chapter Index Menu List iv 1 Before You Begin 1 2 First Steps 19 3 Basic Photography and Playback 33 4 Movie Recording and Playback 39 5 Taking Photographs 45 6 The Shooting Menus 91 7 Playback and the Playback Menu 129 8 The Setup Menus 151 9 Shortcuts 173 10 Peripherals and Optional Accessories 181 11 Connections 187 12 Technical Notes 199 iii Menu List Camera menu options are listed below. Shooting Menus Menu List Adjust settings when shooting photos or movies. N See page 91 for details. H IMAGE QUALITY SETTING P G AF/MF SETTING P IMAGE SIZE 92 FOCUS AREA 102 IMAGE QUALITY 93 FOCUS MODE 102 FILM SIMULATION 94 AF MODE 103 PORTRAIT ENHANCER LV 95 NUMBER OF FOCUS POINTS 104 1⁄2 1⁄2 BRIGHT MODE 95 PRE-AF 104 DYNAMIC RANGE 96 AF ILLUMINATOR 104 WHITE BALANCE 97 FACE/EYE DETECTION SETTING 105 HIGHLIGHT TONE 100 AF+MF 106 SHADOW TONE 100 MF ASSIST 106 COLOR 100 FOCUS CHECK 107 SHARPNESS 100 2⁄2 INTERLOCK SPOT AE & FOCUS AREA 107
    [Show full text]
  • Aperture Priority Mode F/4.0 at 1/25, Among Others
    Chapter 3: Shooting Modes for Still Images | 23 The Program Shift function is available only in Program you’re taking pictures quickly using Program mode, and mode; it works as follows. Once you have aimed the you want a fast way to tweak the settings somewhat. camera at your subject, the camera displays its chosen settings for shutter speed and aperture in the lower- Another important aspect of Program mode is that it left corner of the screen. At that point, you can turn the expands the choices available through the Shooting Control dial at the upper right of the camera’s back, and menu, which controls many of the camera’s settings. the values for shutter speed and aperture will change, You will be able to make choices involving ISO if possible under current conditions, to different sensitivity, metering mode, DRO/HDR, white balance, values for both settings while keeping the same overall Creative Style, Picture Effect, and others that are not exposure of the scene. available in the Auto modes. I won’t discuss those settings here; if you want to explore that topic, see With this option, the camera “shifts” the original the discussion of the Shooting menu in Chapter 4 for exposure to your choice of any of the matched pairs information about all of the different selections that that appear as you turn the Control dial. For example, if are available. the original exposure was f/2.8 at 1/50 second, you may see equivalent pairs of f/3.2 at 1/40, f/3.5 at 1/30, and Aperture Priority Mode f/4.0 at 1/25, among others.
    [Show full text]
  • What Else Do I Need to Know?
    What Else Do I Need to Know? Some Settings To Get You Started OMD EM1X w/300mm f4 PRO lens Basic Birding Tips! Mode Dial Which Setting and Why? A -Aperture Priority • Subject is still or moving generally slow. Allows user to control Depth of Field. You can also easily control the Exposure Compensation. S -Shutter Priority • User wants control over the Shutter Speed in order to capture fast moving subjects. You can also easily control the Exposure Compensation. M -Manual • User has control over both the Aperture and the Shutter Speed. Allows for adjusting for the light available and the subject matter. OMD EM1X w/300mm f4 PRO lens Basic Birding Tips! Mode Dial Use Custom Modes! Camera Mode Dials E-M10 Mark III E-M5 Mark III E-M1 Mark II E-M1X E-M1 Mark III What Do I Use Custom Modes For? • Birds In Flight & Pro Capture Page 1 Page 2 Page 3 Page 4 Quick How-To Basic Birding Tips! Basic Settings ISO Sensitivity • Lower light levels demand higher ISO numbers • Sunny days = ISO 200 to 400 ISO 6400 Don’t be afraid to shoot at higher ISO’s to be sure you get a fast enough shutter speed to reduce Basic Birding Tips! Basic Settings Exposure Compensation Live view enables photographers to adjust exposure before shooting. +1.0EV +0.7EV Basic Birding Tips! Basic Settings Exposure Compensation • Many birds are dark color and white, and the shooting situation are various • Correct exposure compensation is necessary Bright background -1.5 stops Normal +1.5 stops Dark background Basic Birding Tips! Basic Settings Shutter Speed • To completely freeze Wing tips, a shutter speed of 1/2500s or faster is demanded • 1/1250s – 1/2000s is also available if you want to express motions.
    [Show full text]