DOCSLIB.ORG

Price List/Order Terms

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Price List/Order Terms PRICE LIST/ORDER TERMS 575 SE ASHLEY PLACE • GRANTS PASS, OR 97526 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE www.linxtechnologies.com RF MODULES Prices Effective 02/04/04 Linx RF modules make it easy and cost-effective to add wireless capabilities to any product. That’s because Linx modules contain all the components necessary for the transmission of RF. Since no external components (except an antenna) are needed, the modules are easily applied, even by persons lacking previous RF design experience. This conserves valuable engineering resources and greatly reduces the product's time to market. Once in production, Linx RF modules improve yields, reduce placement costs, and eliminate the need for testing or adjustment. LC Series - Low-Cost Ultra-Compact RF Data Module The LC Series is ideally suited for volume use in OEM applications, such as remote control, security, identification, and periodic data transfer. Packaged in a compact SMD package, the LC modules utilize a highly optimized SAW architecture to achieve an unmatched blend of performance, size, efficiency and cost. Quantity TX RX-P* RX-S • Complete RF TX/RX solution <200 $5.60 $11.80 $10.90 • Ultra-compact size • Low cost in volume 200-999 $4.90 $10.65 $9.85 • High-performance SAW 1,000-4,999 $4.38 $9.50 $8.90 architecture >5000 Call Call Call • Direct serial interface • Low power consumption Part #’s Description • 5kbps maximum data rate TXM-***-LC LC Series Transmitter • >300ft. range RXM-***-LC-P LC Series Receiver Pinned SMD • No production tuning RXM-***-LC-S LC Series Receiver Compact SMD • No external components =315, 418, 433MHz 418MHz Standard RX-S *** required (except antenna) * = -P version not recommended for new designs • Wide temperature range RX-P LR Series - Long Range, Low Cost RF Data Module NEW The LR Series provides a 5-10 times range improvement over previous discrete and modular solutions and establishes a new benchmark for range performance and cost effectiveness within our product line. Housed in tiny SMD package that is footprint compatible with the popular LC Series, the LR Series interfaces to virtually any data source, making it ideal for the wireless transfer of serial data, control, or command information. The receiver’s advanced synthesized superhet architecture achieves an outstanding typical sensitivity of -116dBm and is capable of transferring data at rates of up to 10,000bps at distances in excess of 3,000 feet. Applications operating at short distances, or lower data rates will also benefit from increased link reliability and superior noise immunity. • Long-range • Wide supply range (2.7 - 5.2VDC) • Low-cost • Compact surface-mount Package • PLL synthesized architecture • Wide temperature range • Direct serial interface • RSSI and power-down functions • Data rates to 10,000bps • No production tuning • Qualified data output • No external components needed • Low power consumption Quantity TX RX <200 $5.95 $9.80 200-999 $5.28 $9.63 1,000-4,999 $4.67 $8.65 >5000 Call Call Part #’s Description TXM-***-LR LR Series Transmitter RXM-***-LR LR Series Receiver ***=315, 418, 433MHz 418MHz Standard Page 1 of 25 575 SE ASHLEY PLACE • GRANTS PASS, OR 97526 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE www.linxtechnologies.com RF MODULES KH Series - Integrated Transmitter/Encoder and Receiver/Decoder Modules The KH Series is ideally suited for OEM applications, such as remote control/command, security, and automation. Packaged in a compact reflow-compatible SMD package, the modules combine a highly optimized RF stage with a parallel encoder/decoder. The transmitter module accepts up to eight parallel inputs, allowing direct connection of switches, contacts, or microprocessor control lines. The receiver provides eight logic-level outputs for connection of devices under control, such as relays, motors, indicators, or microprocessor lines. Ten tri-state address lines are also provided to allow for security and the creation of 59,049 unique transmitter/receiver relationships. When paired with a suitable antenna, the modules form a reliable wireless connection capable of operation at distances in excess of 300 feet. No additional RF components except an antenna are required. The modules are also individually compatible with a complete family of FCC pre-certified OEM products, which include keyfob and handheld transmitters, relay and AC control modules. • Complete RF/control solution Quantity TX/ENC RX/DEC • On-board encoding/decoding • Transfers status of 8 data lines <200 $7.80 $12.75 • 59,049 selectable addresses 200-999 $6.70 $11.45 • Compact size 1,000-4,999 $6.30 $10.20 • Low power consumption >5000 Call Call • >300ft. range • No production tuning Part #’s Description • Cost-effective TXE-***-KH KH Series Transmitter • User-friendly SMD construction RXD-***-KH KH Series Receiver • Directly connect switches, contacts, micros etc. =315, 418, 433MHz 418MHz Standard *** • No external components required (except antenna) RM Series - High-Performance Single-Channel FSK RF Module The RM Series combines FSK modulation and a sensitive receiver architecture to achieve improved range and performance over the lower-cost LC Series. Like the LC, the RM is SAW-based for stable frequency control and cost-effectiveness. Quantity TX RX <200 $16.20 $28.30 • Easily integrated space-saving SIP package • SAW-based precision 200-999 $15.85 $24.60 • FM/FSK for superior transmission integrity 1,000-4,999 $13.45 $22.50 • High data rates (up to 10kbps) >5000 Call Call • >800ft. transmission range Part #’s Description • Horizontal or vertical mount • No production tuning required TXM-***-RM RM Series Transmitter • Wide supply voltage range RXM-***-RM RM Series Receiver • No external components required (except antenna) ***=418, 433 MHz ES Series - High-Performance Single-Channel FSK RF Module Housed in a tiny SMD package, the ES utilizes an advanced FM/FSK-based synthesized architecture to provide superior performance and noise immunity when compared to AM/OOK solutions. An outstanding 56kbps maximum data rate and wide-range analog capability make the ES Series equally at home with digital data or analog sources including audio. • Ultra-compact SMD package Quantity TX RX • FM/FSK modulation for performance/noise immunity • Precision-frequency synthesized architecture <200 $11.95 $13.95 • Excellent sensitivity for outstanding range performance 200-999 $10.30 $12.80 • Direct interface to analog and digital sources 1,000-4,999 $9.57 $11.30 • High data rate - 56,000bps max. >5000 Call Call • Wide-range analog capability including audio 20Hz-28kHz • Very low current for long life in battery-powered applications Part #’s Description • No tuning or external RF components required (except antenna) TXM-***-ES ES Series Transmitter • User powerdown input RXM-***-ES ES Series Receiver • RSSI signal strength output ***= 433, 868, 916 MHz1 • Low-voltage detect and microprocessor clock output on TX • Cost-effective: low cost vs. performance NOTE: 1. Only available in 916MHz at this time. Additional frequencies coming soon. Check the Linx website for availability. Page 2 of 25 575 SE ASHLEY PLACE • GRANTS PASS, OR 97526 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE www.linxtechnologies.com RF MODULES HP-3 Series - High-Performance Synthesized Multi-Channel Analog/Digital RF Module NEW The HP-3 RF transmitter and receiver modules are the third generation of the popular HP Series and offer complete compatibility and numerous enhancements over previous generations. These enhancements include up to 100 channels, extended temperature range, increased receiver sensitivity, smaller size, lower cost and new SMD package styles. Like its predecessors, the HP-3 series is designed for cost-effective, high-performance wireless transfer of analog or digital information in the 902-928MHz band. The modules employ FM/FSK modulation and an advanced microprocessor-controlled synthesized architecture, forming a reliable wireless link capable of transferring analog and digital information at distances up to 1000ft. All modules continue to feature eight parallel-selectable channels, but versions are also available that add serial selection of 100 channels. Both SMD and pinned packages are available. • Complete 900MHz RF TX/RX solution • Microprocessor-based synthesized architecture • Wide-range analog interface (50Hz - 25kHz) • Qualified data output, true RSSI, CTS functions • Direct serial data interface • Up to 1000ft. range • Very high data rate (up to 56kbps) • Cost-effective • Wide supply voltage range (2.8 - 13VDC) • No production tuning required • No external components required (except antenna) • Horizontal or vertical mount Part Number <200 200-999 1,000-4,999 >5,000 TXM-900-HP3-PPO $23.60 $21.30 $18.90 Call TXM-900-HP3-PPS $24.10 $21.80 $19.40 Call TXM-900-HP3-SPO $23.25 $20.96 $18.56 Call TXM-900-HP3-SPS $23.75 $21.46 $19.06 Call RXM-900-HP3-PPO $31.70 $28.90 $26.90 Call RXM-900-HP3-PPS $32.20 $29.40 $27.40 Call RXM-900-HP3-SPO $31.35 $28.56 $26.56 Call RXM-900-HP3-SPS $31.85 $29.06 $27.06 Call SC-S Series - Low-Cost Surface-Mount Half-Duplex Transceiver The TR-916-SC-S transceiver module is designed for the cost-effective, bi-directional transfer of wireless information. The transceiver utilizes an advanced synthesized superhet architecture and has direct interface for analog or digital information, UART-compatible data output, RSSI, low power consumption, wide operational voltage, on-board TX/RX switch, SAW front-end filter, and
Load more

Recommended publications
  • AR2200 (Version 2) RF Module User Guide
    AR2200 (Version 2) RF Module User Guide TransCore 8600 Jefferson Street NE Albuquerque, New Mexico 87113 February 2012 P/N 411947-007 Information in this document is subject to change and does not represent a commitment on the part of TC License, Ltd. © 2007 TC License, Ltd. All rights reserved. TRANSCORE and AMTECH are registered trademarks of TC License, Ltd. All other trademarks listed are the property of their respective owners. Contents subject to change. Printed in the U.S.A. For further information, contact: TransCore 3410 Midcourt Road, Suite 102 Carrollton, Texas 75006 USA Phone: (214) 461-4031 Fax: (214) 461-6478 Technical Support Web: transcore.com/rfidsupport Phone: (505) 856-8007 For comments or questions about this document, e-mail [email protected]. iii WARNING TO USERS IN THE UNITED STATES FEDERAL COMMUNICATIONS COMMISSION (FCC) LOCATION AND MONITORING SERVICE STATEMENT 47 CFR §90.351 NOTE: The user is required to obtain a Part 90 site license from the FCC to operate this radio frequency identification (RFID) device in the United States. See product label for FCC ID number. Access the FCC Web site at www.fcc.gov/Forms/Form601/601.html or wireless.fcc.gov/index.htm?job=online_filing to obtain additional information concerning licensing requirements. NOTE: Users in all countries should check with the appropriate local authorities for licensing requirements. FCC RADIO FREQUENCY INTERFERENCE STATEMENT 47 CFR §15.105(a) NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules.
    [Show full text]
  • Antenna Gain Measurement Using Image Theory
    i ANTENNA GAIN MEASUREMENT USING IMAGE THEORY SANDRAWARMAN A/L BALASUNDRAM A project report submitted in partial fulfillment of the requirement for the award of the degree Master of Electrical Engineering Faculty of Electrical and Electronic Engineering Universiti Tun Hussein Onn Malaysia JANUARY 2014 v ABSTRACT This report presents the measurement result of a passive horn antenna gain by only using metallic reflector and vector network analyzer, according to image theory. This method is an alternative way to conventional methods such as the three antennas method and the two antennas method. The gain values are calculated using a simple formula using the distance between the antenna and reflector, operating frequency, S- parameter and speed of light. The antenna is directed towards an absorber and then directed towards the reflector to obtain the S11 parameter using the vector network analyzer. The experiments are performed in three locations which are in the shielding room, anechoic chamber and open space with distances of 0.5m, 1m, 2m, 3m and 4m. The results calculated are compared and analyzed with the manufacture’s data. The calculated data have the best similarities with the manufacturer data at distance of 0.5m for the anechoic chamber with correlation coefficient of 0.93 and at a distance of 1m for the shield room and open space with correlation coefficient of 0.79 and 0.77 but distort at distances of 2m, 3m and 4m at all of the three places. This proves that the single antenna method using image theory needs less space, time and cost to perform it.
    [Show full text]
  • CC2650MODA Simplelink™ Bluetooth® Low Energy Wireless MCU Module
    Product Order Technical Tools & Support & Reference Folder Now Documents Software Community Design CC2650MODA SWRS187D –AUGUST 2016–REVISED JULY 2019 CC2650MODA SimpleLink™ Bluetooth® low energy Wireless MCU Module 1 Device Overview 1.1 Features 1 • Microcontroller • Low Power – Powerful ARM® Cortex®-M3 – Wide Supply Voltage Range – EEMBC CoreMark® Score: 142 – Operation from 1.8 to 3.8 V – Up to 48-MHz Clock Speed – Active-Mode RX: 6.2 mA – 128KB of In-System Programmable Flash – Active-Mode TX at 0 dBm: 6.8 mA – 8KB of SRAM for Cache – Active-Mode TX at +5 dBm: 9.4 mA – 20KB of Ultra-Low-Leakage SRAM – Active-Mode MCU: 61 µA/MHz – 2-Pin cJTAG and JTAG Debugging – Active-Mode MCU: 48.5 CoreMark/mA – Supports Over-The-Air (OTA) Upgrade – Active-Mode Sensor Controller: • Ultra-Low-Power Sensor Controller 0.4 mA + 8.2 µA/MHz – Can Run Autonomous From the Rest of the – Standby: 1 µA (RTC Running and RAM/CPU System Retention) – 16-Bit Architecture – Shutdown: 100 nA (Wake Up on External – 2KB of Ultra-Low-Leakage SRAM for Events) Code and Data • RF Section • Efficient Code Size Architecture, Placing Drivers, – 2.4-GHz RF Transceiver Compatible With Bluetooth® low energy Controller, IEEE® 802.15.4 Bluetooth low energy (BLE) 5.1 Specification Medium Access Control (MAC), and Bootloader in and IEEE 802.15.4 PHY and MAC ROM – CC2650MODA RF-PHY Qualified (QDID: • Integrated Antenna 88415) • Peripherals – Excellent Receiver Sensitivity (–97 dBm for – All Digital Peripheral Pins Can Be Routed to Bluetooth low energy and –100 dBm for Any GPIO 802.15.4),
    [Show full text]
  • RF Based Wireless Remote Using RX-TX MODULES (434Mhz.)
    RF Based Wireless Remote using RX-TX MODULES (434MHz.) Summary of the project This circuit utilizes the RF module (Tx/Rx) for making a wireless remote, which could be used to drive an output from a distant place. RF module, as the name suggests, uses radio frequency to send signals. These signals are transmitted at a particular frequency and a baud rate. A receiver can receive these signals only if it is configured for that frequency. A four channel encoder/decoder pair has also been used in this system. The input signals, at the transmitter side, are taken through four switches while the outputs are monitored on a set of four LEDs corresponding to each input switch. The circuit can be used for designing Remote Appliance Control system. The outputs from the receiver can drive corresponding relays connected to any household appliance. Description This radio frequency (RF) transmission system employs Amplitude Shift Keying (ASK) with transmitter/receiver (Tx/Rx) pair operating at 434 MHz. The transmitter module takes serial input and transmits these signals through RF. The transmitted signals are received by the receiver module placed away from the source of transmission. The system allows one way communication between two nodes, namely, transmission and reception. The RF module has been used in conjunction with a set of four channel encoder/decoder ICs. Here HT12E & HT12D have been used as encoder and decoder respectively. The encoder converts the parallel inputs (from the remote switches) into serial set of signals. These signals are serially transferred through RF to the reception point. The decoder is used after the RF receiver to decode the serial format and retrieve the original signals as outputs.
    [Show full text]
  • An Improved Method to Determine the Antenna Factor Wout Joseph and Luc Martens, Member, IEEE
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Ghent University Academic Bibliography 252 IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, VOL. 54, NO. 1, FEBRUARY 2005 An Improved Method to Determine the Antenna Factor Wout Joseph and Luc Martens, Member, IEEE Abstract—In this paper, we present an improved method to de- [5] and [6]. These methods make use of tabulated values of termine the antenna factor of three antennas. Instead of using a the maximum field strength for frequencies below 1000 MHz. reflecting ground plane we use absorbers. Destructive interference An advantage of our method is that it is applicable for both E- between the direct beam and the residual reflected beam from the absorbers is avoided by splitting the measured frequency range and H-field probes. For the calibration of loop antennas, two in bands and changing the distance between the two antennas de- methods are described in [7]. The first method is based on cal- pending on the frequency band. Furthermore, this method is ap- culation of the loop impedances. The second method is by gen- plicable for both E- and H-field probes. Our method has also the erating a well-defined standard magnetic field. The first method advantage of being low-cost: The method does not need to be per- cannot be used because the geometric shape of the split-shield formed in an anechoic chamber to obtain high accuracy. To take the residual reflections of the environment into account, we perform a loop probes is not simple.
    [Show full text]
  • Linx RF Module Overview Guide
    RF Module Overview Guide Linx strives to make every engineer a hero in record timeTM by minimizing the risk, delays and technical challenges for design engineers to implement wireless in their products. Unlike other module producers, every aspect of our product and design experience is specifically crafted to achieve Wireless Made Simple®. Revised 11/4/13 Linx RF Module Parameters Transparent (Radio only, no built-in protocol or software configuration) Remote Control & Sensor (Built-in encoder/decoder/transcoder) Type Packetized Wireless Data (Serial UART interface with built-in protocol for data transfer) Picture NEW! BETA NEW! BETA NEW! NEW! NEW! Series LC LR LT ES NT EUR/DTS 25 250 HumDataTM (DT) HumRCTM (RC) TT KH3 Separate Separate Separate Function Transmitter transmitter & Transceiver transmitter & Transceiver Transceiver Transceiver Transceiver Transceiver Transceiver Transceiver transmitter & receiver receiver receiver Lowest power, easy to implement, flexibility of protocol for remote Transparent data module, user protocol on Lowest cost spread spectrum data with Plug & play for remote control with integrated MCU and FHSS Spread spectrum for data with integrated MCU control and non-periodic data external MCU integrated MCU protocol Plug & play, Product Positioning Short range, Short range, integrated encoder Lowest cost More robust Two way link, Analog / audio Long range, serial Longest range, Medium range, robust Medium range worldwide Medium range worldwide Long range, robust / decoder transmitter transmitter acknowledgement
    [Show full text]
  • AN1048: Regulatory RF Module Certifications
    AN1048: Regulatory RF Module Certifications This application note provides a brief summary of general radio certifications, focusing on the 2.4 GHz frequency band and cover- KEY POINTS ing the wireless modules of Silicon Labs. • Brief review of Silicon Labs radio module certifications Silicon Labs RF modules are certified to meet the requirements of the Federal Commu- • Regulatory overview of various countries nications Commission (FCC), Innovation, Science, and Economic Development (ISED), • Radio certification flow European Conformity (CE), and other regulatory bodies. When using Silicon Labs pre- certified modules, customers can refer to these certifications and related test reports to • RF Exposure considerations achieve regulatory compliance. • Accredited test house examples • Silicon Labs certification-related This document also provides answers to frequently-asked questions and general guid- documentation for customers ance for radio certification. • Wireless Module Certification FAQ Certification requirements depend on regions and modules. This document highlights the main differences between the different modules, module types, and certification re- quirements between different countries. It also describes a list of requirements that the pre-certified module must meet in order to get a full modular certification as well as dif- ferences between the FCC and CE and other countries. silabs.com | Building a more connected world. Rev. 0.3 AN1048: Regulatory RF Module Certifications Introduction 1. Introduction Certification requirements depend on regions and modules. This document highlights the main differences between the different mod- ules, module types, and certification requirements of different countries. It also describes a list of requirements that the pre-certified module must meet in order to get a full modular certification as well as differences between the FCC and CE and other countries.
    [Show full text]
  • Internet of Things: How to Select a Bluetooth Module ––
    Internet of Things: How to Select A Bluetooth Module –– APPLICATION NOTE Internet of Things: How to Select A Bluetooth Module APPLICATION NOTE You will learn: The basic process of Bluetooth module integration, typical Bluetooth applications, selection of parameters for a Bluetooth module and how to select Bluetooth modules for different applications. Contents 1. The Applications of Bluetooth in the Internet 5. The Key RF Performance Tests for Bluetooth of Things .....................................................................3 Module ......................................................................12 5.1 Modulation Characteristics ........................................... 13 2. Introduction to Bluetooth Technology .........................5 5.2 Carrier Frequency Offset and Drift................................ 14 2.1 Bluetooth Classification .................................................. 5 5.3 In-band Spurious Emissions ......................................... 15 2.2 Frequency band and channel ......................................... 5 5.4 Output Power .............................................................. 16 2.3 Frequency Hopping ....................................................... 6 5.5 20 dB Bandwidth ......................................................... 16 2.4 Modulation ..................................................................... 7 5.6 Frequency Range ........................................................ 16 3. The workflow of Bluetooth Module Integration ...........8 5.7 Power Density ............................................................
    [Show full text]
  • Xe50-433/868 RF Module User Guide
    xE50-433/868 RF Module User Guide 1VV0300905 Rev.13 – 2015-07-28 xE50-433/868 RF Module User Guide 1VV0300905 Rev.13 – 2015-07-28 APPLICABILITY TABLE PRODUCT LE50-433 LE50-868 NE50-868 NE50-433 ME50-868 Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 2 of 50 xE50-433/868 RF Module User Guide 1VV0300905 Rev.13 – 2015-07-28 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Notice While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country.
    [Show full text]
  • C-Band TWG-1 Best Practices Annexes
    ANNEX D Approved June 4, 2020 Terrestrial-Satellite Coexistence During and After the C-Band Transition Technical Work Group #1 Scope of Work 1. Preventing Interference 1.1. Emphasize the need for the FCC to complete its review of the pending C-Band incumbent earth station registration and modification applications in IBFS. 1.2. Agree on relevant data necessary for protection of Earth stations. (All 3.7 GHz Service licensees need to work from a common list of Earth stations.) 1.3. Understand best practices that 3.7 GHz Service licensees use to predict whether the FCC- specified power flux density (PFD) limits will be exceeded at earth station locations. 1.4. Agree on a common method for converting between PFD and power spectral density (PSD) at the Earth station. 1.5. Understand the nature of the Earth station receive filters to ensure that they will be adequate to reject 3.7 GHz Service signals below 3.98 GHz over a range of environmental conditions in order to ensure that the FCC-specified blocking PFD limit is met. 2. Interference Detection 2.1. Develop a procedure for earth stations to positively identify or exclude sources of interference. This procedure should rapidly eliminate non-3.7 GHz Service causes and initiate the inter-service interference resolution process. Consider whether a detection and alerting mechanism could be automated, particularly for major Earth station facilities. 2.2. Develop estimates of distances between 3.7 GHz facilities and earth stations beyond which interference is unlikely. 2.3. Develop a process for positively identifying or excluding sources of 3.7 GHz interference.
    [Show full text]
  • Xbee Wi-Fi RF Module User Guide
    XBee® Wi-Fi RF Module S6B User Guide Revision history—90002180 Revision Date Description R June Modified regulatory and certification information as required by RED (Radio 2017 Equipment Directive). S March Re-organized the AT commands to match the order in XCTU. Noted that 2019 PK is the wi-fi password. Updated the AP, MK, and GW descriptions. T June Added FCC publication 996369 related information. 2019 U August Removed Brazilian certification information. 2019 V July Added safety instructions and UKCA labeling requirements. 2021 Trademarks and copyright Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other countries worldwide. All other trademarks mentioned in this document are the property of their respective owners. © 2019 Digi International Inc. All rights reserved. Disclaimers Information in this document is subject to change without notice and does not represent a commitment on the part of Digi International. Digi provides this document “as is,” without warranty of any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular purpose. Digi may make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this manual at any time. Warranty To view product warranty information, go to the following website: www.digi.com/howtobuy/terms Customer support Gather support information: Before contacting Digi technical support for help, gather the following information: Product name and model Product serial number (s) Firmware version Operating system/browser (if applicable) Logs (from time of reported issue) Trace (if possible) XBee Wi-Fi RF Module User Guide 2 Description of issue Steps to reproduce Contact Digi technical support: Digi offers multiple technical support plans and service packages.
    [Show full text]
  • RF / IR Encoder / Decoder Chipset RF Evaluation Boards
    RF / IR Encoder / Decoder Chipset RF600E RF600D RF Evaluation Boards, • Highly Secure Protocol • RF Encoder & Decoder IC’s • Simple to Use • Stand Alone Operation • Achieves Maximum Range from RF Modules • 1 – 4 Switch Options (15 states) • Decoder Serial Output • Led Indication of Transmission • Directly Compatible with Keeloq Decoder • Easy Learn Feature of Transmitters • Sleep Mode • Up to 48 Transmitters can be Learned Description The RF Solutions RF600E, & RF600D are easy to use • Compatible with RF Solutions Systems encoder and decoder I/C’s. They have been designed to Typical Applications achieve the maximum possible range from any radio / Infra Red transmitter receiver set. General Purpose Remote Control • Unlike other encoder /decoder devices the RF600E/600D • Automotive alarm systems provide an unprecedented level of security which prevents copying or grabbing whist also obtaining optimum range Gate and garage openers • from the transmitter and receiver. • Electronic door locks The devices are very easy to use and can be inserted • Identity tokens directly into a circuit. The RF600D has an easy learn feature enabling it to learn up to 7 unique RF600E encoder devices • Burglar alarm systems in standalone mode or up to 48 encoder devices when used in conjunction with an external EEPROM. Encoder These devices enable a simple but secure remote telemetry • 2.0-6.6V operation application whilst obtaining the maximum range from the 1 8 Automatic Battery Level Monitor radio set. • 2 7 RF600E • ‘Manchester’ modulation 3 6 4 5 • 8 pin DIP/SOIC package Decoder 1 18 2 17 • 18 pin DIP/SOIC package 3 16 • 4 Digital Outputs (15 States) 4 15 5 RF600D 14 • Asynchronous serial interface 6 13 • 4.5V – 5.5V operation 7 12 8 11 9 10 DS600-10 March ‘06 ©2004 Reg.
    [Show full text]