DOCSLIB.ORG

AMBEO® for Binaural AMBEO How It Works: for Binaural Normal Stereo Audio Is Limited to Two Dimensions: Only Left and Right Inside the Head of the Listener

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
AMBEO® for Binaural AMBEO How It Works: for Binaural Normal Stereo Audio Is Limited to Two Dimensions: Only Left and Right Inside the Head of the Listener AMBEO® for Binaural AMBEO How it works: for Binaural Normal stereo audio is limited to two dimensions: only left and right inside the head of the listener. Binaural audio breaks this barrier by allowing sounds to be placed anywhere in front, behind, above, or below the listener in three dimensions, while still using only a stereo signal to carry the audio. Technically speaking, binaural audio is a stereo audio signal that has been treated with the same temporal and spatial acoustic properties that, in the 3D audio can be created in diverse ways. real world, allow us to hear sounds all around us, in three dimensions. These The right recording technique is defined acoustic properties are simulated with Head Related Transfer Function Filters, by the desired playback device. Of the or HRTFs, which render a virtual 3D surround experience over headphones. several immersive audio techniques that Binaural recording is a method to create binaural audio by recording sounds Sennheiser is offering solution for, AMBEO in real life. It uses two microphones, to create a natural sensation as if you for binaural is the most appropriate and were actually in the room where the sound is being produced. It is an easy convenient solution to deliver 3D content and effective technique for creating immersive audio content for playback to mobile platforms and headphones. over headphones. Introducing AMBEO, Immersive Audio by Sennheiser AMBEO is Sennheiser’s program and sub-brand for immersive audio, which covers immersive audio products and technologies for the entire audio signal chain, from capture to mixing and processing to reproduction. AMBEO products are designed to deliver immersive sound experiences with an incredibly high emotional impact. Differing from stereo audio or even 5.1 or 7.1 formats, AMBEO experiences include height to create an “as if you were there” feeling. This leap into sound immersion has been compared to the switch from mono to stereo that happened in the last century. AMBEO immersive audio yields such plausible experiences that it is set to eliminate the boundaries between reality and reproduction, and between real and artificial sound sources. By revealing its strategic focus on immersive audio from very early on, Sennheiser has invited users and technology partners around the globe to share their ideas, feedback and requirements in the design of the company’s 3D audio solutions, thus shaping the future In all its forms, AMBEO delivers immersive audio content not only of audio together with Sennheiser. surrounding the listener, but also above and below, creating AMBEO sets standards in immersive audio, creating an “all around” experience. a totally new audio experience that will change music and sound forever. Thanks to Sennheiser’s broad audio expertise and product offering, application scenarios For more information about the binaural approach to immersive will range from music recording and playback to audio recording, visit the AMBEO for Headphones blueprint: gaming as well as sports broadcasting, live events sennheiser.com/ambeo-blueprints-headphones streaming and films. Recording Binaural Audio AMBEO SMART HEADSET – Binaural Recording made easy, right from your iPhone AMBEO SMART HEADSET are headphones for iPhone with 3D audio recording capabilities, high fidelity sound and the ability to tune in or tune out the sounds around you. Connect AMBEO SMART HEADSET directly to the Lightning port on your iPhone, listen to your music or videos with stunning quality – The earpieces are fitted with professional quality omnidirectional microphones for binaural recording that capture the sounds of your environment in 3D, just like your ears hear them. These microphones also enable the Transparent Hearing and Noise Cancellation features that allow you to blend the sounds of your surroundings with your music or tune them out. Use AMBEO SMART HEADSET to effortlessly add 3D immersive sound to the videos you create and share anytime on iPhone. Listen back to these recordings through any pair of headphones to experience 3D sound with lifelike depth and relive the feeling of the original experience. sennheiser.com/ambeosmartheadset Neumann KU 100 – The Professional Way of Recording Binaural The KU 100 dummy head is a binaural stereo microphone. It resembles the human head and has two microphone capsules built into the ears. When listening through high-quality headphones it gives the illusion of being right at the scene of the sound event. The binaurally recorded soundscape can be enhanced by the addition of spatially processed spot microphones. These spots are typically panned with a binaural panner, positioning them at a virtual position of choice. There’s no decoding required i.e. the binaural mix can be played over headphones without any additional processing for replay over headphones. The 3D audio image will not natively translate over loudspeakers. Learn how to record, mix and deliver AMBEO binaural sound by visiting our online guide at sennheiser.com/ambeo-blueprints-headphones Free download of AMBEO Orbit plugin at sennheiser.com/ambeo-orbit AMBEO Binaural Panner Upgrade your binaural mixing workflow need a strong “out-of-head” perception, whereas other sources by pairing your Neumann KU 100 or AMBEO SMART HEADSET need as much clarity as possible, with this unique feature you with the newly released beta version of the AMBEO Binaural have full control. Panner. This plugin allows you to effectively position additional mono or stereo sources into the 3D sound field, avoiding The AMBEO Binaural Panner also offers a unique interface unwanted coloration of sound that can be caused by artificial for creating binaural room reflections, which allows users to “binauralization” of sources. drastically improve spatial accuracy in comparison to a reverb The patented clarity control lets you choose how much of the plugin. The AMBEO Binaural Panner is available in AAX, VST, binaural coloration is actually applied. Some sources might VST3 and AU format for both Mac and Windows. AMBEO Augmented Audio Developers’ Program Augmented Audio is yet another natural home for binaural technologies. Sennheiser has packaged the AMBEO Smart Headset with software tools targeting mixed reality applications and audio interfaces. Think along the lines of gaming, navigation, meditation, conference calls or danger awareness. There are many possible applications. Interested in getting exclusive early access to the tools that will enable you to explore and create augmented audio applications? Learn about our AMBEO Augmented Audio developers’ tools and more exclusive news by subscribing to our newsletter. Register by sending an email to [email protected] with the mention “AMBEO Newsletter”. More info at www.sennheiser.com/ambeo-application-binaural.
Load more

Recommended publications
  • Optimal Crosstalk Cancellation for Binaural Audio with Two Loudspeakers
    Optimal Crosstalk Cancellation for Binaural Audio with Two Loudspeakers Edgar Y. Choueiri Princeton University [email protected] Crosstalk cancellation (XTC) yields high-spatial-fidelity reproduction of binaural audio through loudspeakers allowing a listener to perceive an accurate 3-D image of a recorded soundfield. Such accurate 3-D sound reproduction is useful in a wide range of applications in the medical, military and commercial audio sectors. However, XTC is known to add a severe spectral coloration to the sound and that has been an impediment to the wide adoption of loudspeaker-based binaural audio. The nature of this coloration in two-loudspeaker XTC systems, and the fundamental aspects of the regularization methods that can be used to optimally control it, were studied analytically using a free-field two-point-source model. It was shown that constant-parameter regularization, while effective at decreasing coloration peaks, does not yield optimal XTC filters, and can lead to the formation of roll-offs and doublet peaks in the filter’s frequency response. Frequency-dependent regularization was shown to be significantly better for XTC optimization, and was used to derive a prescription for designing optimal two-loudspeaker XTC filters, whereby the audio spectrum is divided into adjacent bands, each of is which associated with one of three XTC impulse responses, which were derived analytically. Aside from the sought fundamental insight, the analysis led to the formulation of band-assembled XTC filters, whose optimal properties favor their practical use for enhancing the spatial realism of two-loudspeaker playback of standard stereo recordings containing binaural cues. I.
    [Show full text]
  • Accurate Reproduction of Binaural Recordings Through Individual Headphone Equalization and Time Domain Crosstalk Cancellation
    PROCEEDINGS of the 23rd International Congress on Acoustics 9 to 13 September 2019 in Aachen, Germany Accurate reproduction of binaural recordings through individual headphone equalization and time domain crosstalk cancellation David GRIESINGER1 1 David Griesinger Acoustics, Cambridge, MA, USA ABSTRACT Accessing the acoustic quality of spaces of all sizes depends on methods that can instantly and precisely compare the sound of different seats and spaces. Complex systems using many loudspeakers have been developed that hopefully achieve this goal. Binaural technology offers a simpler solution. The sound pressure at a listener’s eardrums can be measured with probe microphones, and reproduced with headphones or speakers calibrated at the eardrums. When carefully done the scene is precisely reproduced. But due to the variability of ear canal resonances such recordings and playbacks are highly individual. In this paper we present methods that are non-individual. Our recordings from a dummy head or from the eardrums are equalized to be essentially frequency linear to sound sources in front, giving the recording head the frontal frequency response of studio microphones. The recordings are then played back either through headphones equalized at the eardrum to match the response of a frontal source, or with a simple, non-individual crosstalk cancelling system. We equalize headphones at an individual’s eardrums using equal loudness measurements, and generate crosstalk cancellation with a non-individual algorithm in the time domain. Software apps and plug-ins that enable headphone equalization and crosstalk cancellation on computers and cellphones are now available. Keywords: Binaural, Headphones, Crosstalk 1. INTRODUCTION This paper concerns methods for binaurally recording and later precisely reproducing the sound in a hall or room.
    [Show full text]
  • Binaural Basics.Pdf
    INAURAL Binaural recordings will add a new dimension to your audio world. JOHN SUNlER mikes feed two channels which are kept entirely separated from the source all the way to the final listener, whether live, a record- ing, or a broadcast. The listener wears stereo headphones and the between the two. That's because original left ear signal must be most source material isn't de- routed properly to the left ear and ALTHOUGH MOST AUDIOPHJLES ARE signed for headphone listening. the right to the right or the effect familiar with the term binal~ral, An unnaturally exaggerated is compromised. The final result there's still quite a bit of con- effect is created with head- is for the listener to be sonically fusion about it. Early in stereo phones, as though half an or- transported to where the sounds history the terms binaural and chestra is on one side of your originated, rather than attempt- stereo were used interchangea- head and the other half on the ing to bring the sounds into the bly, even though the two record- other side, with a hole in the mid- listener's room as with speakers. ing methods are totally different. dle. Also, the music sounds as if The left speaker signal is pre- Recording pioneer Emory Cook it's happening inside your head vented from feeding into the lis- caused some of that confusion by rather than out in the room. No tener's right ear, and vice versa, calling his early 50's twin- serious record producer would with binaural playback on stereo grooved stereo LP's binaural ever monitor a recording session headphones.
    [Show full text]
  • Manual of Analogue Sound Restoration Techniques
    MANUAL OF ANALOGUE SOUND RESTORATION TECHNIQUES by Peter Copeland The British Library Analogue Sound Restoration Techniques MANUAL OF ANALOGUE SOUND RESTORATION TECHNIQUES by Peter Copeland This manual is dedicated to the memory of Patrick Saul who founded the British Institute of Recorded Sound,* and was its director from 1953 to 1978, thereby setting the scene which made this manual possible. Published September 2008 by The British Library 96 Euston Road, London NW1 2DB Copyright 2008, The British Library Board www.bl.uk * renamed the British Library Sound Archive in 1983. ii Analogue Sound Restoration Techniques CONTENTS Preface ................................................................................................................................................................1 Acknowledgements .............................................................................................................................................2 1 Introduction ..............................................................................................................................................3 1.1 The organisation of this manual ...........................................................................................................3 1.2 The target audience for this manual .....................................................................................................4 1.3 The original sound................................................................................................................................6
    [Show full text]
  • 3-D Audio Using Loudspeakers ~: ~
    3-D Audio Using Loudspeakers William G. Gardner B. S., Computer Science and Engineering, Massachusetts Institute of Technology, 1982 M. S., Media Arts and Sciences, Massachusetts Institute of Technology, 1992 Submitted to the Program in Media Arts and Sciences, School of Architecture and Planning in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy at the Massachusetts Institute of Technology September, 1997 ©Massachusetts Institute of Technology, 1997. All Rights Reserved. Author Program in Media Arts and Sciences August 8, 1997 Certified by i bBarry L. Vercoe Professor of Media Arts and Sciences 7 vlassachusetts Institute of Tecgwlogy Accepted by V V Stephen A. Benton Chair, Departmental Committee on Graduate Students Program in Media Arts and Sciences Massachusetts Institute of Technology ~: ~ 2 3-D Audio Using Loudspeakers William G. Gardner Submitted to the Program in Media Arts and Sciences, School of Architecture and Planning on August 8, 1997, in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy. Abstract 3-D audio systems, which can surround a listener with sounds at arbitrary locations, are an important part of immersive interfaces. A new approach is presented for implementing 3-D audio using a pair of conventional loudspeakers. The new idea is to use the tracked position of the listener's head to optimize the acoustical presentation, and thus produce a much more realistic illusion over a larger listening area than existing loudspeaker 3-D audio systems. By using a remote head tracker, for instance based on computer vision, an immersive audio environment can be created without donning headphones or other equipment.
    [Show full text]
  • Simplified Binaural Measurement Systems for Interior Noise Evaluation of Truck Vehicle Compartments
    Simplified Binaural Measurement Systems for Interior Noise Evaluation of Truck Vehicle Compartments Master’s Thesis in the International Master’s programme in Sound and Vibration MADELENE PERSSON AND PETER TORSTENSSON Department of Civil and Environmental Engineering Division of Applied Acoustics Chalmers Room Acoustics Group - MSA CHALMERS UNIVERSITY OF TECHNOLOGY Göteborg, Sweden 2007 Master’s Thesis 2007:32 MASTER’S THESIS 2007:32 Simplified Binaural Measurement Systems for Interior Noise Evaluation of Truck Vehicle Compartments Master’s Thesis in the International Master’s programme in Sound and Vibration MADELENE PERSSON AND PETER TORSTENSSON Department of Civil and Environmental Engineering Division of Applied Acoustics Chalmers Room Acoustics Group - MSA CHALMERS UNIVERSITY OF TECHNOLOGY Göteborg, Sweden 2007 Simplified Binaural Measurement Systems for Interior Noise Evaluation of Truck Vehicle Compartments Master’s Thesis in the International Master’s programme in Sound and Vibration MADELENE PERSSON AND PETER TORSTENSSON © MADELENE PERSSON AND PETER TORSTENSSON, 2007 Master’s Thesis 2007:32 Department of Civil and Environmental Engineering Division of Applied Acoustics Chalmers Room Acoustics Group - MSA Chalmers University of Technology SE-412 96 Göteborg Sweden Telephone: + 46 (0)31-772 1000 Cover; Plot of interaural level difference calculated from head related transfer function measurements, Chalmers Reproservice Gothenburg, Sweden 2007 Simplified Binaural Measurement Systems for Interior Noise Evaluation of Truck Vehicle Compartments Master’s Thesis in the International Master’s programme in Sound and Vibration MADELENE PERSSON AND PETER TORSTENSSON Department of Civil and Environmental Engineering Division of Applied Acoustics Chalmers Room Acoustics Group - MSA Chalmers University of Technology ABSTRACT This Master Thesis was carried out in cooperation with Volvo 3P to design a simple system capable to record, playback and measure levels of noise in truck compartments.
    [Show full text]
  • Using the Unit Safely
    Using the Unit Safely Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (p. 2; p. 6). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit,Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. About WARNING and CAUTION Notices About the Symbols The symbol alerts the user to important instructions or Used for instructions intended to alert the warnings.The specific meaning of the symbol is user to the risk of death or severe injury determined by the design contained within the triangle. In should the unit be used improperly. the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of injury or material The symbol alerts the user to items that must never be damage should the unit be used carried out (are forbidden). The specific thing that must improperly. not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that * Material damage refers to damage or the unit must never be disassembled. other adverse effects caused with respect to the home and all its The symbol alerts the user to things that must be furnishings, as well to domestic animals carried out.
    [Show full text]
  • Tape Recording
    THE MAGAZINE OF HOME AND MAGNETIC FILM & PROFESSIONAL SOUND RECORDING TAPE RECORDING NEW TAPE TESTS RECORDERS RECORDING VOCALS WITH PIANO DON'T MISS THAT PROGRAM! GIVE YOUR SLIDES A VOICE NEW PRODUCT REPORT: LIFETIME TAPE BINAURAL SOUND WITH TWO RECORDERS TAPE CLUB NEWS APRIL 1954 35c NEW HOT- SLITTING PROCESS GIVES q,LIdiatCLR_L_' EXTRA STRENGTH Newly perfected thermal- slitting technique provides smoother, cleaner edges, resulting in increased break and tear strength of plastic base Audiotape THE manufacture of Audiotape, particu- For thermal slitting avoids the formation of TN lar care has always been given to the slit- the microscopic cracks and irregularities ting operation, in which the processed tape is which result, in varying degrees, from any cut into reel -size widths. Precision straight - cold slitting process. Each such defect is a line slitting has been one of the reasons why source of weakness and a potential tape Audiotape tracks and winds perfectly flat break. and has no fuzzy edges to impair frequency The thermal treatment in no way alters response. Audiotape's balanced performance. Hence Now, however, even this superior slitting Audiotape not only offers you the most operation has been still further improved faithful reproduction of the original sound, by precisely controlled heat application. but also assures the highest mechanical The result, though not visible to the naked strength obtainable with cellulose acetate eye, is a significant increase in tape strength. base material -all at no extra cost. Audiotape is now ... and in colors, too! Audiotape 7" reels can now be obtained, available on this for special applications, in red, blue, green, yellow or clear plastic.
    [Show full text]
  • Binaural Microphone Types 4101-B and 4965-B (Bp2562)
    PRODUCT DATA Binaural Microphone Types 4101-B and 4965-B Binaural Microphone Type 4101-B has been designed specifically for binaural sound recordings where testing on a human subject is preferred and/or where the use of the traditional head and torso simulator (HATS) method is precluded. These microphones are lightweight, do not affect normal hearing capabilities and, consequently, do not influence test results. Type 4965-B consists of Type 4101-B together with a Bluetooth®-enabled headset for replaying recordings. Uses and Features Uses Features • Binaural recordings near the entrance of the human ear canal • Easy-to-use with a lightweight and compact design • Sound recordings where a vehicle driver wears the binaural • Miniature, prepolarized condenser microphones that are microphone positioned at the entrance to the ear canal and do not affect • Binaural recordings where the influence of the test subject’s normal hearing capabilities head and torso is important • Able to record two channels of sound • Sound recordings of a helmeted test subject, such as a • Low equivalent noise level of 23 dB(A) motorcycle driver • Powered from constant current line drive (CCLD) input channel • Psychoacoustic experiments requiring binaural sound via BNC plug recording on human subjects • Free-field and diffuse-field correction data tables included and • Binaural recordings where the use of a traditional HATS, for built into Sonoscout™ NVH Recorder example, Sound Quality Head and Torso Simulator Type 4100, • Calibration adapter for use with Sound Calibrator
    [Show full text]
  • Historical Development of Analog Disc Recording Technology And
    Historical Development of Analog Disk Recording Technology and Artifacts Now in Existence — Shift from Mechanical to Electrical Recording Methods for Longer 1 Duration Recordings and Stereo Sound — Takeaki Anazawa ■ Abstract Chapter 2 of this study, titled “The Birth and Rise of the Phonograph,” touches on related developments . The history of analog recordings dates back to 1877 when American inventor Thomas Edison came up with a new phonograph that enabled users to record sound onto a recording cylinder and replay that audio. In 1887, just 10 years later, German inventor Emile Berliner created the gramophone. The era from that time up until the end of World War I was one where the cylinder-based recording medium competed with the disk-based medium. Later, the disk medium, which was more conducive to mass replication, went on to dominate in the realm of analog recordings. Chapter 3 of this study, titled The Birth of Acoustic (Mechanical) Disk Recording and Playback, describes developments in Japan with respect to audio recordings . Toward the end of the nineteenth century, Japan began importing wax cylinder audio devices. At the beginning of the twentieth century, Western record companies began making recordings in Japan, and then reproduced those recordings back home for export to Japan. In 1909, a Japanese company began manufacturing disk-shaped records (single sided 78-rpm records, 10-inches in diameter), which were released under the “Nipponophone” label. One year later, in 1910, Japan’s first domestically produced gramophone player was released. Chapter 4 of this study, titled The Advent of Electrical Recording, describes circumstances ensuing after the end of the World War I.
    [Show full text]
  • Dummy Head Recording
    Dummy Head Recording Michael Gerzon FIRST, IT SHOULD BE emphasised that binaural recordings, i.e. Recently, there has been a lot of recordings made for reproduction interest in dummy-head or binaural via headphones, contain three main recording for reproduction via types of sound-localisation cue that headphones. This has been presented is absent from conventional stereo, by some as ‘the answer to and that there has been some quadraphony’, and some ill-informed conflict of opinion as to which cue comment has thoroughly confused is most important. The first cue is people as to the advantages and that of time delays between the disadvantages of binaural techniques. ears. It is clear that a sound from, Issues and available information are say, the left will arrive at the left summarised, together with an ear before the right ear. For a indication of areas of doubt. sound on the extreme left, this time delay at the right ear is about 0.62 ms, and for a sound arriving from (say) 30° from the left of front (or back, or up, or down), the time delay is about 0.24 ms. Clearly, the time delay cue cannot distinguish front from behind from above from below. All it indicates is the angle of arrival of the sound from the axis of symmetry of the ears. One technique of binaural recording makes use mainly or only of this cue, and that is the ORTF technique of using a pair of microphones spaced apart by about 17 cm. In order to improve compatibility with stereo loudspeaker reproduction, the microphones are directional ones pointing to the left and right respectively, angled about 110° one from the other (see fig.
    [Show full text]
  • R-Series Brochure.Pdf
    Advanced recorders conceived and created by Roland, the trusted leader in music technology Because we understand the essence of sound, we make no Proprietary IARC analog circuitry is the key to Linear PCM recording exceeds audio-CD quality Stress-free usability for fast, high-quality recordings compromises in quality. And because we have a solid track excellent sound quality With support for linear PCM recording (WAVE) up to 24-bit at 96 kHz, the Functions that are used most often are record as a pioneer in the fi eld, no other product family compares R-Series recorders are equipped with Roland’s proprietary IARC (Isolated R-series lets you create astonishingly realistic recordings, capturing the controllable via hardware switches, including the to the R-series’ quality and ease of use. Roland WAVE/MP3 Adaptive Recording Circuit). Input levels reaching the A/D converter are finest details of the source. MP3 is also supported, so you can chose the INPUT LEVEL button for adjusting input level, recorders symbolize a no-compromise pursuit of high-quality optimized to ensure that audio is digitally converted while retaining its audio format that best suits your application. Recordings are captured and MIC GAIN for configuring mic sensitivity, and natural, pure quality. Additionally, the independent power-supply circuitry stored on industry-standard SDHC/SD memory cards, supporting high- LOW CUT for eliminating irritating low-frequency sound recording and a passion for perfection. Whether you prevents noise caused by interference between circuits. quality sound and lengthy recording times. noise. These compact recorders fit in your choose by performance or value, you will fi nd your solution here.
    [Show full text]