DOCSLIB.ORG

Logging Contest Rules

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Logging Contest Rules Sultan Shindig Logging Contest Rules (On Best Time Events—Each contestant can have only one best time per event for the weekend.) There will be no practicing on the site after 12noon on competition days. 1. CHOKERMAN RACE—Start at the painted start line, cross walk log, get your choker, cross walk log with choker, bonus all the logs and remove the slack from your choker, cross walk log and return to finish. BEST TIME. 2. AXE THROW—Both feet behind the line (20’). The axe must stick to count. TWO DAY COMBINED SCORE. 3. OBSTACLE POLE BUCK—Start with both hands on prop log and saw running below the start line. Run up log, standing behind the first line. An undercut is required. (The staff will paint a mark to hit for the undercut.) Cut off the end and return down the pole to finish. If you fall off, return to the place you left the pole, get back on and return to the finish. BEST TIME. 4. POWER SAW BUCK—Bore through the log, cutting the bottom half first. Pull the saw and restart at the top, cutting down to complete your cut. Cut through the painted lines making a 50/50 cut. Start. TWO DAY COMBINED TIME. 5. FIRE WOOD CHOPPING—Chop each round in half, then chop each half in half. Slivers don’t count, each finished peace must be at least 2” thick. After splitting, stack you wood in a pile where all the pieces are touching the main body of the pile. (16 total pieces are required to qualify) BEST TIME. 6. SPEED CLIMBING—(Standard gear only—no toe spurs). Start with one foot on the pole and one foot on the ground. The time stops when you ring the bell at the top. BEST TIME. 7. WRAPPER TOSS—Set two wrappers between the paint lines. Start at the front bumper of the truck, run with wrappers/ binders and secure the binder tight enough so it’s snug, no slack. Must be ‘road legal’. TWO DAY COMBINED TIME. 8. OBSTACLE COURSE—Cross walk log and get your choker, return on the opposite walk log, circle the stump and dive under the pole. Start up the prop log behind the base line, set your choker after 1 foot crossed the line toward the end. NO COWBOYS! If you fall off, return to the point where you fell off and continue the race. Cross the painted finish line. BEST TIME. (note to judges: explain this one to all contestants. Paint 2 lines on the log to show were to set the choker.) 9. HOOKTENDERS RACE—Hang the block and strap above the railroad spike. The haywire must go through the block in the tree, cross the walk log to the corner block. Hand the corner block with both eyes in the gooseneck and the molly replaced with three wraps in the molly. Run the haywire through the block and hook it into the hindu. Run back across the walk log to the spar tree to finish the race. Use any equipment you want to assist you in handing the block up the tree. The pimp can not leave with the haywire until the strap is belled above the spike. TWO DAY COMBINED TIME. HOT SAW DIVISIONS ARE NOT INCLUDED IN THE BULL OF THE WOODS SCORES. Modified Saws may be shared by two people only. 10. STOCK MODIFIED HOT SAWS—Timber cutting production modified saws. Work ready models, no pipes. 100cc or 6cubic inch. Pump gas mix only. Cut through log from top to bottom, straight cut. Hot start. TWO DAY COMBINED TIME. 11. EXTREME MODIFIED HOT SAWS—Bore through log from top to bottom, straight cut. Anything goes including rotex up to the V6/V8 Class. Hot start. TWO DAY COMBINED TIME. 12. MULTI-CYLINDER CLASS HOT SAWS—Anything goes. If two people can lift it you can compete. Hot start. TWO DAY COMBINED TIME. 13. VINTAGE SAW DIVISION—Includes Saws from year 1945—1960. 14. HANDSAW BUCKING—Saws will be provided. Chaps must be worn. Best Time First Place Only. Open class! All competitors welcome. 15. JACK & JILL HANDSAW BUCKING — 50 years and up division. Saws will be provided. Chaps mush be worn. Best time. First Place only. Proper clothing must be worn. All climbers need to use steel core rope. (no straps) For day two each contestant will use the saw or course they did not use on day one. Each contestant must participate on both days to qualify. .
Load more

Recommended publications
  • Chainsaw Safety.Pub
    CHAIN SAW SAFETY With over 165,000 reported injuries or deaths in a year, the Kickback occurs due to the fact of: chain saw is often referred to as the “most dangerous hand • the physics of the spinning chain tool” on the market. Of these only 5% were accidents that around the tip of the bar; were NOT operator error. It is important to be cautious and • putting the upper ¼ of the bar tip alert when using a chainsaw. in a bind or pinched condition (boring with the bar tip or hitting TERMINOLOGY another object such as a limb, Felling is the act of cutting (or dropping) a tree. sapling or tree); • the violent release of pressure Limbing is when you take off the limbs after a tree has from the object being cut (limb under pressure or spring- fallen. Bucking is when you cut the tree into manageable pole) pieces after it has fallen. • unintentionally hitting the ground with the tip of the chain When limbing or bucking, place the tree at waist level so In any of these instances the saw is thrown back towards back injuries do not occur. Make sure the log is secure and the user. A saw cutting at full throttle can kick back in one- will not roll. Once secure, proper cutting techniques vary on tenth of a second faster than a person can react. Proper how the tree is supported: stance can help lessen the effects of kickback. Trunk is supported along its entire length—make cuts from the top (called overbuck) one-third the diameter of the log HAVE A PLAN OF ATTACK deep, the entire length of the trunk.
    [Show full text]
  • Inter Fire 2 Final
    Proceedings of the 2003 International Wildland Fire Safety Summit Toronto, Ontario, Canada November 18-20, 2003 HOSTED BY: International Association of Wildland Fire Ontario Ministry of Natural Resources SPONSORED BY: Héli-Inter Hicks and Lawrence Wildfire Campbell Helicopters Ltd. Fire Logistics, Inc. What on Earth 1 This Safety Summit was made possible with generous support from our major sponsors: CAMPBELL HELICOPTERS LTD. 2 Proceedings of the 2003 International Wildland Fire Safety Summit Tuesday, November 18, 2003 Wildland Fire Operations Safety – A Comprehensive Program to Change a Culture ........................................................................................5 Redesigned Fire Shelter Now Available for Wildland Firefighters ....................................................................................................................8 Assessing the Need for Footwear with Protective Toecaps for Wildland Fire Operations in Alberta .................................................................12 Loggers and Logging Equipment to Fight Wildland Fires: Issues and Opportunities in Oregon ......................................................................14 Hazard Tree and Snag Safety .......................................................................................................................................................................18 Wednesday, November 19, 2003 Aviation Safety on the Fire Line ....................................................................................................................................................................22
    [Show full text]
  • American Lumberjack Association
    American Lumberjack May Association 2018 ALA Board of Directors President: Eric Hoberg Membership Winner! [email protected] 406-531-9345 Congratulations to our winner Vice President: Rob Waibel Lee Williamson! [email protected] 503-369-9910 A big thank you to those who sent in their membership early. This sped up check-in and registration at the Secretary: Chrissy Ramsey University of Montana Pro-Am this year. [email protected] 509-945-3350 The ALA winter/spring meeting encountered some hiccups. The meeting Treasurer: James Hartley was moved inside due to inclement weather and BBQ technical [email protected] difficulties. We still had a productive meeting. See minutes below: 509-344-9951 Present: Eric Hoberg, James Hartley, Alvie Marcellus, Carl & Chrissy Ramsey, Trevor & Tiffany Baker, Clay & Emily Stephenson, Amanda Chenowith, Linda Hoberg Board Members: Board Business: Discussed, voted and passed. The ALA will sponsor the Women’s Gordy Mauhl Underhand at UofM ProAm ($450), will sponsor Brownsville and West Linn 425-788-1201 novice/intermediate events ($455), Will sponsor an intermediate Vertical at 206-669-0224c Longview ($490), will sponsor an intermediate vertical and single buck at Priest River ($?). Cody Labahn [email protected] General Meeting: 541-231-9659 Went over sponsored events. The goal is to continue to get new competitors into the sport and to support novice/intermediate/masters/ Trevor Baker women’s events [email protected] 206-713-3742 Rule Book. The committee for the rule book review did not turn in a review. Motion to keep the rules the same for the 2018 competition season as the 2014-2017 rulebook states.
    [Show full text]
  • Department 22 – Section 3 – Woodsman's Contest
    Department 22 – Section 3 – Woodsman’s Contest Friday, August 20th at 9:00am in the Main Arena Registration required by July 6, 2021 $10.00 entry fee per class Send entry blank and fee to: Harford Agricultural Society, 485 Fair Hill Road, New Milford, PA 18834 Rules and Regulations 1. This event will be following the New York State Lumberjack Association Rules. Please contact the Secretary’s Office for a copy of the rules. 2. Only participants will be allowed in the arena. No unauthorized people will be allowed in the arena. 3. ALL CLASSES MUST BE PREREGISTERED. Note: any changes must be brough to the arena registration table between 8:00am an d8:30am the day of the show or the original entry will be enforced. 4. PARTICIPANTS ARE REQUIRED TO USE SAFETY EQUIPMENT. Participation is at contestant’s own risk. 5. Two minutes maximum will be given for each participant to appear for their class. No exceptions. There will be a MANDATORY PARTICIPANTS MEETING AT 8:30AM IN THE ARENA. Contest will be begin at 9:00am. 6. For more information, call or email Ben Marshall at 603-759-4858 or [email protected] Classes: Premiums: 1. Women’s Axe Throw $60 $50 $40 $30 $20 $10 2. Men’s Axe Throw $60 $50 $40 $30 $20 $10 3. Women’s Underhand Chop $60 $50 $40 $30 $20 $10 4. Men’s Underhand Chop $60 $50 $40 $30 $20 $10 5. Men’s Crosscut $60 $50 $40 $30 $20 $10 6. Women’s Crosscut $60 $50 $40 $30 $20 $10 7.
    [Show full text]
  • Views Are Not Expressed Or Not Considered Often Miss It Can Also Be Cut Continuously from Underneath the Log by Important Factors
    Preparation for Bucking and Felling Safety Considerations Boots are required when using a crosscut saw. Boots are Great care needs to be taken when bucking or felling. defi ned in the USDA Forest Service’s Health and Safety Code The same principles apply whether a crosscut saw or a chain Handbook ( FSH 6709.11) as: Heavy-duty, cut resistant or saw is used, but the sawyer is exposed to risks longer during leather, waterproof or water-repellent, 8-inch high laced crosscut saw operations. However, the crosscut sawyer can boots with nonskid soles (hard toes are optional). better bear the forces acting on the wood than a chain saw A fi rst aid kit must be available at the worksite. Other operator. safety considerations such as a medical evacuation plan, pro- visions for radio use, and local policies (such as restrictions on working alone) must be followed by crosscut sawyers and need to be documented in the job hazard analysis (JHA). Never attempt any action that is above your ability or if you are unsure of the prob- Determining the Forces on the Log able outcome. Always be ready to adjust When cutting a log, three main forces need to be con- your cutting strategy based on how forces sidered: wood under compression, wood under tension, and are affecting the cut. gravity (fi gure 45). Ten Personal Protective Equipment sion Less personal protective equipment is required to use a Compression crosscut saw than is required to operate a chain saw. Although chaps and ear protection are needed to operate a chain saw, they generally are not required to use a crosscut saw.
    [Show full text]
  • Safety with Chainsaws
    Safety With Chainsaws Dr. Glen H. Hetzel and J. Butler, Agricultural Engineering Department, Virginia Tech Introduction Do you know approximately what percentage of all woods accidents in a year are typically the result of a chain saw cut? 30 Percent Do you know how fast a chain saw blade can move at full throttle? 45 MPH Do you know which age group of operators are at the greatest risk for injury? Younger Operators Do you know how many of all chain saw accidents could be prevented? Almost all of them Chain saws are powerful tools that make your job of cutting firewood and fallen trees and removing small trees much easier. But their power makes them very dangerous tools. Most accidents are the result of a moving chain contacting the operator in some way. The good news for you is that there are several things you can do to keep yourself from becoming a victim. You Are the Most Important 3. Practice! Begin with logs on which you can make trial cuts to get the feel of your saw and Factor of Your Own Safety the way it handles. How? 4. NEVER WORK ALONE! At least be 1. Know your saw and how to operate it before within yelling distance of help. you use it. That means reading and Even if you have used your saw a few times understanding your operator's manual. If there before, or you've used it once a year for the past are instructions you do not understand, talk to several years, these are still important steps to take your chain saw dealer or to someone who is and precautions to think about.
    [Show full text]
  • Hands on the Wood and Get Your Tickets!
    STIHL TIMBERSPORTS® World Championships come to Stuttgart Hands on the wood and get your tickets! Elite lumberjacks from all over the world are coming to Germany: the ninth STIHL TIMBERSPORTS® World Championships are taking place in Stuttgart on 25 and 26 October. More than 100 international athletes will be competing in individual and team contests at the Porsche Arena. Tickets for this top lumber sports event are available now on the Internet at www.easyticket.de. The 2013 STIHL TIMBERSPORTS® World Championships are taking place in Stuttgart on 25 and 26 October. Over 100 athletes from more than 20 nations will be competing against one another with the axe and saw in individual and team contests. The organizers expect about 10,000 spectators to fill the Porsche Arena for the international season finals of the top-class lumber sport series. Andreas Kroll of in.Stuttgart, responsible for events in the state capital, is looking forward to a great sport spectacle. “We are delighted that Stuttgart is hosting the world’s best lumberjacks. Support for sport has always been very big here and we’re hoping to see lots of fans at the Porsche Arena.” Tickets for the international STIHL TIMBERSPORTS®season finals are available on the Internet now at www.easyticket.de. Tickets for the team world championships on Friday 25 October and for the individual competition on Saturday 26 October each cost EUR 18 for adults and EUR 12 for children and young people aged under 16 and for seniors over 70. Handling charges and postage are payable in addition to these prices.
    [Show full text]
  • Understory Biomass Reduction Methods and Equipment (0051-2828- MTDC) Does Not Include the 137-Page Catalog of Machines and Specialized Equipment
    Understory Biomass United States Department of Agriculture UnderstoryReduction Biomass Methods Forest Service Reductionand Methods Equipment Technology & Development Catalog Program and Equipment 5100 Fire 2400 Timber April 2000 0051-2826-MTDC Catalog Keith Windell, Project Leader Sunni Bradshaw, Technical Writer USDA Forest Service Technology & Development Program Missoula, Montana 7E72P55—Understory Biomass Reduction April 2000 The Forest Service, United States Department of Agriculture (USDA), has developed this information for the guidance of its employees, its contractors, and its cooperating Federal and State agencies, and is not responsible for the interpretation or use of this information by anyone except its own employees. The use of trade, firm, or corporation names in this document is for the information and convenience of the reader, and does not constitute an endorsement by the Department of any product or service to the exclusion of others that may be suitable. The USDA prohibits discrimination in all its programs and activities on the basis of race, color, national origin, gender, religion, age, disability, political beliefs, sexual orientation, and marital or family status. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, and so forth) should phone USDA’s TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint of discrimination, write: USDA, Director, Office of Civil Rights, Room 326-W, Whitten Building, 14th and Independence Avenue SW, Washington, DC 20250-9410, or call (202) 720- 5964 (voice or TDD). USDA is an equal opportunity provider and employer. i Acknowledgments his publication was requested by a specially formed several intermediate drafts.
    [Show full text]
  • Rules and Regulations 2021 Sportsmanship
    Version: 30 March 2021_V1 Rules and Regulations 2021 STIHL TIMBERSPORTS® is an international extreme sports competition series. Its roots lie in Canada, the United States, Australia and New Zealand, where workers in the timber industry would hold competitions to determine who was the fastest in a range of wood chopping and sawing disciplines that closely simulated their everyday work. These logging disciplines evolved with time into a series of sporting disciplines that require tremendous athleticism, strength, precision and power. Today the world’s best athletes compete in national and international events featuring three axe disciplines and three sawing disciplines. Springboard, Underhand Chop and Standing Block Chop are the classic axe disciplines; Single Buck (single-man cross-cut saw), Stock Saw (standard chainsaw) and Hot Saw (tuned, customized chainsaw) are the sawing disciplines. For more information visit: www.stihl-timbersports.com. Sportsmanship The success of the STIHL TIMBERSPORTS® Series depends on good sportsmanship, professionalism, tolerance, respect and fair play. Everyone associated with the STIHL TIMBERSPORTS Series is expected to conduct themselves in a manner that reflects these values. Unsportsmanlike conduct includes inappropriate audible or visual displays including political gestures to the general public or actions considered to be unfair or unsafe at any time. This includes intentionally disparaging or displaying the sponsors equipment, logos or brands in an unprofessional or unsafe manner to the public. In addition, any infraction against the anti-doping rules of the World Anti-Doping Agency (the rules can be viewed in English at www.wada-ama.org) will be penalized. The consumption of alcohol or any other illegal drugs for athletes/ helpers/ team captains is forbidden during the whole length of a competition (also if these persons are eliminated).
    [Show full text]
  • NRCG Incident Business Management Handbook, Chapter 20
    ACQUISITION CHAPTER 20 NORTHERN ROCKIES COORDINATING GROUP (NRCG) NWCG STANDARDS FOR INTERAGENCY INCIDENT BUSINESS MANAGEMENT SUPPLEMENT CHAPTER 20 – ACQUISITION Supplement No: NR-2021 Effective Date: April 1, 2021 Duration: Effective until superseded or removed Approved: /s/ Josh Harvey JOSH HARVEY Chair Posting Instructions: Post by document, remove the entire document, and replace with this supplement. Retain this transmittal as first page of document. New Document NR-2021-3 66 pages Superseded Document(s) by NR-2020-3 (4/01/20) 66 pages Issuance Number and Effective Date Digest: • Updated various weblinks • Pumper cat tank capacity was changed to minimums rather than a range • Removed flywheel horsepower range for Skidgines • For all equipment that requires fire extinguishers only 1 extinguisher is required and should be 2A-10BC • Engine and water tender certification forms changed to say that failure to meet specifications shall be considered a withdrawal of equipment • Updated capacity for Gray Water Trucks • Increased daily rate of Single Fallers and Faller Modules Release Date: April 1, 2021 NR20-1 ACQUISITION CHAPTER 20 • The typing for fuel tenders has been changed in 2021 to align with the current SIIBM Method of Hire Chart and the national VIPR template • Removed Northern Rockies specifications for Fuel Tenders and references the typing in the current NWCG Standards for Interagency Incident Business Management and the national VIPR template • Moved rates for unoperated privately owned vehicle to Chapter 50 since this method can only be utilized by the states. • Removed unoperated rates for all automobiles 1 GEOGRAPHICAL AREA SOLICITATIONS 2 The following items are under a Geographical Area or National Solicitation and the Dispatch 3 Priority List (DPL) or resource list generated for these solicitations should be the first source of 4 supply.
    [Show full text]
  • Fresh Cut Brian Recovered Walnut Trees with the Timberjig Woodworkingproject.Com Just Before Christmas in Steep Bank
    GOSO LO L 25 YEARS SPECIAL EDITION NEWS & CUSTOMER REVIEWS #2014/2015 The Finest Gifts Are The Best Way to Made by You PAGE 15 Learn How to Saw: Watch a Video PAGE 20 Family Are Building For really Wide Their Dream House Floorboards – Saw and in Step with Life Plane Them Yourself PAGE 8 PAGE 18 IT Started WITH A Sawmill 25 YEARS OF TRUE JOY PAGES WORKING WITH WOOD 10–11 Five Stars to the He Realized His Window Making with LOGOSOL Sawmill Dream of a Sauna Logosol Machines PAGE 11 PAGE 14 PAGE 12 Safe Purchases and True Job Satisfaction ou can confidently choose LOGOSOL when small-scale wood processing. you are going to work with wood. We Customers all over the world have discovered Y have a solution and a price that suit most the possibility of harvesting planks and boards building projects. Our equipment gives you great from their own forests, and with time more freedom in realizing your dreams, no matter if and more efficient machines for small-scale it is a new terrace, a garden shed or your own wood processing have been introduced. The business. smaller sawmills have been joined by efficient Wood processing is a profitable occupation, and band sawmills for forest owners who want to to many people the interest goes deeper than invest in more than just sawing for household that. Smelling the scent of wood, processing consumption. a log, which then becomes something lasting, Today, our wide range of products extends up to this is something I wish many people got the industrial production.
    [Show full text]
  • Operating a Chain Saw Safely
    ■ ,VVXHG LQ IXUWKHUDQFH RI WKH &RRSHUDWLYH ([WHQVLRQ :RUN$FWV RI 0D\ DQG -XQH LQ FRRSHUDWLRQ ZLWK WKH 8QLWHG 6WDWHV 'HSDUWPHQWRI$JULFXOWXUH 'LUHFWRU&RRSHUDWLYH([WHQVLRQ8QLYHUVLW\RI0LVVRXUL&ROXPELD02 NATURAL ■ ■ ■ DQHTXDORSSRUWXQLW\$'$LQVWLWXWLRQ H[WHQVLRQPLVVRXULHGX RESOURCES Operating a Chain Saw Safely hain saws are relatively common and may seem simple to operate. But felling trees and clearing Cbrush with a chain saw are operations that require training and proper safety precautions. Logging is among the most dangerous professions. And if it is dangerous for professionals, it is even more so for the average landowner. So, carefully consider the need for training before buying and using a chain saw. MU Extension publication G1954, Selecting and Maintaining a Chain Saw, highlights safety features to look for when purchasing a chain saw. It also contains some helpful tips for maintaining a saw. MU Extension publication G1958, Felling, Limbing and Bucking Trees, provides basic information for cutting down trees. Prepare yourself Prepare yourself for operating a chain saw. Read the operator’s manual and obtain training from someone who is experienced with chain saws. It is very important to become familiar with the recommended safe operational procedures Figure 1. When operating a chain saw, always wear personal protective equipment, including a hard hat, eye and ear protection, gloves and boots. before attempting to work with a chain saw. Although you could learn how to use a chain saw from experience alone, that may come at a very high price — mishap and injury — • Lightweight gloves, preferably leather, to protect and probably isn’t worth it. hands from abrasions and cuts.
    [Show full text]