How to Access Your BIOS Set up 111408

Total Page：16

File Type：pdf, Size：1020Kb

How to Access your BIOS Set-Up Guidelines BIOS Settings The Ethernet Ready-On functionality is generally disabled by default. The option to enable Ethernet Ready-On is different for each computer manufacturer. The most common method adopted across different PCs is as follows: 1. During the computer’s power-on self-test, enter the BIOS setting screen. 2. When in the BIOS mode, select Power Management or equivalent settings. 3. Enable setting related to Wake on LAN on PCI card, LAN, or Network. 4. Click Save and exit the BIOS settings. Access to your BIOS set-up menu will differ depending on your computer model. Here is a list of access keys for the most common models. ACER Use the DEL or F2 keys after switching on your system. When using the Acer Altos 600 server, access the BIOS set-up by pressing the CTRL+ALT+ESC keys. COMPAQ Ensure that the cursor in the upper right corner of your screen is blinking before pressing the F10 key. Older Compaqs use the F1, F2, F10 or DEL keys to grant access to your BIOS set-up menu. DELL After switching on your computer, let the DELL logo appear before pressing the F2 key until Entering Setup is displayed on the screen (??). Older DELL models might require you to press CTRL+ALT+ENTER to access the BIOS set-up menu. DELL laptops will use the Fn+ESC or Fn+F1 keys to access the BIOS set-up. GATEWAY When switching on your computer, press the F1 key until the BIOS screen shows up. Older Gateway models use the F2 key to display the BIOS set-up screen. HEWLETT-PACKARD When switching on your computer system, press the F1 key to access the BIOS set-up screen. For those using an HP Tablet PC, press the F10 or F12 keys. You can also access the BIOS menu by pressing F2 or ESC. IBM When your system is restarting, press the F1 key to access the BIOS set-up. Older IBM models require the use of the F2 key to access the BIOS set-up utility. NEC Use the F2 key to access the BIOS set-up menu. SHARP Press the F2 key when your computer is loading. Older Sharp models require the use of the Setup Diagnostics Disk. SONY Press the F1, F2 or F3 key after switching on the computer. TOSHIBA Press the F1 or ESC key after switching on the computer. 11/17/2008 Copyright Ergotron Inc., Content subject to change without notice SV32 Ethernet Ready-On .

Copy Link

Recommended publications

Boot Mode Considerations: BIOS Vs UEFI
Boot Mode Considerations: BIOS vs. UEFI An overview of differences between UEFI Boot Mode and traditional BIOS Boot Mode Dell Engineering June 2018 Revisions Date Description October 2017 Initial release June 2018 Added DHCP Server PXE configuration details. The information in this publication is provided “as is.” Dell Inc. makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose. Use, copying, and distribution of any software described in this publication requires an applicable software license. Copyright © 2017 Dell Inc. or its subsidiaries. All Rights Reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners. Published in the USA [1/15/2020] [Deployment and Configuration Guide] [Document ID] Dell believes the information in this document is accurate as of its publication date. The information is subject to change without notice. 2 : BIOS vs. UEFI | Doc ID 20444677 | June 2018 Table of contents Revisions............................................................................................................................................................................. 2 Executive Summary ............................................................................................................................................................ 4 1 Introduction ..................................................................................................................................................................
[Show full text]
VIA RAID Configurations
VIA RAID configurations The motherboard includes a high performance IDE RAID controller integrated in the VIA VT8237R southbridge chipset. It supports RAID 0, RAID 1 and JBOD with two independent Serial ATA channels. RAID 0 (called Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a sustained data transfer rate, double that of a single disk alone, thus improving data access and storage. Use of two new identical hard disk drives is required for this setup. RAID 1 (called Data mirroring) copies and maintains an identical image of data from one drive to a second drive. If one drive fails, the disk array management software directs all applications to the surviving drive as it contains a complete copy of the data in the other drive. This RAID configuration provides data protection and increases fault tolerance to the entire system. Use two new drives or use an existing drive and a new drive for this setup. The new drive must be of the same size or larger than the existing drive. JBOD (Spanning) stands for Just a Bunch of Disks and refers to hard disk drives that are not yet configured as a RAID set. This configuration stores the same data redundantly on multiple disks that appear as a single disk on the operating system. Spanning does not deliver any advantage over using separate disks independently and does not provide fault tolerance or other RAID performance benefits. If you use either Windows® XP or Windows® 2000 operating system (OS), copy first the RAID driver from the support CD to a floppy disk before creating RAID configurations.
[Show full text]
Custom X86 Hardware and Embedded BIOS™ Design Note #3
Custom x86 Hardware Design Note #3 and Embedded BIOS™ Orchid Technologies Engineering and Consulting, Inc. Orchid excels at providing deeply embedded customized x86 personal computer product designs. Orchid offers rapid hardware development using processor technology from Intel, AMD, Cyrix, and ST-Microelectronics. Orchid embedded designs are customized to suite your feature set, packaging, power and unit cost requirements. Select from a wide variety of peripheral options. Orchid reduces product cost by redesigning older multi-board systems into new single board embedded x86 architectures. Among our successes are: • Celeron Telephony Switch • Pentium II Gaming Motherboard • Pentium II/440BX Raid Controller • Multiprocessor Simulation Engine • Pentium Set Top Box • Mobile Module Based Kiosk • Celeron MP3 Audio Server • Elan SC400 Ruggedized SBC • 386EX Voice/FAX Mail System • Elan SC400 Low Cost Alarm CPU General Software Embedded BIOS™ Embedded BIOS is selected as the BIOS of preference for boards from many of the industry’s most important manufacturers including Intel, AMD, Cyrix and ST- Microelectronics. Embedded BIOS is a full-featured BIOS for x86-based handheld, Orchid Technologies’ unparalleled embedded and volume consumer electronics applications. With over 400 source- experience and its close partnership level configuration options, Embedded BIOS is the most configurable BIOS in with General Software make it the world. Your design can include built-in support for ROM Disks, RAM Disks, the ideal choice for custom x86 Resident Flash Disks (RFD), power management, LCD Panel drivers, console hardware design. redirection, Windows CE-launcher, configurable Setup Screen, and much more. Technology Partnership As a General Software Technology Partner, Orchid Technologies Engineering and Consulting, Inc.
[Show full text]
BIOS Update/Crisis Disk for BEETLE with I815 Standard Motherboard (D2/D2*) Release "WN STD 0B/22"
README.PDF 17.12.2003 BIOS update/crisis disk for BEETLE with i815 standard motherboard (D2/D2*) release "WN STD 0B/22" Contents of DOWNLOAD.ZIP: D2UPDATE0B22ARJ.EXE Selfextracting archive of flash update disk for MS-DOS Needs a prepared bootable floppy or MemCard D2UPDATE0B22IMG.EXE Directly creates a bootable flash update disk on 1,44MB/3,5" floppy. To be used with Windows only. D2UPDATE0B22DD.BIN Floppy image file of flash update disk for Linux; to be extracted by: "dd if=filename of=/dev/fd0" D2CRISIS0B22ARJ.EXE Selfextracting archive of flash crisis disk for MS-DOS Needs a prepared bootable floppy or MemCard D2CRISIS0B22IMG.EXE Directly creates a bootable flash crisis disk on 1,44MB/3,5" floppy To be used with Windows only. D2CRISIS0B22DD.BIN Floppy image file of flash crisis disk for Linux; to be extracted by: "dd if=filename of=/dev/fd0" README.HTM This information Please read these remarks first, before downloading and extracting ZIP file ... This release is not valid for D2 basic motherboard ! THIS RELEASE IS NEEDED, IF YOU WANT TO PERFORM AUTOMATIC UPDATE OF BEETLE BIOS RELEASES OVER INTERNET. The in future (higher than 0B/22) BIOS releases of D2 STD BIOS will also be available as an BEETLE VIEW update package, provided in www - you need to update to this release before! Some new features of the update procedure (UPBIOS.EXE) rel. 3.1: If any of these advanced features is wanted, you need to adapt the update floppy disk! See chapter "How to use flashtool UPBIOS.EXE" for further information about options.
[Show full text]
Chapter 3. Booting Operating Systems
Chapter 3. Booting Operating Systems Abstract: Chapter 3 provides a complete coverage on operating systems booting. It explains the booting principle and the booting sequence of various kinds of bootable devices. These include booting from floppy disk, hard disk, CDROM and USB drives. Instead of writing a customized booter to boot up only MTX, it shows how to develop booter programs to boot up real operating systems, such as Linux, from a variety of bootable devices. In particular, it shows how to boot up generic Linux bzImage kernels with initial ramdisk support. It is shown that the hard disk and CDROM booters developed in this book are comparable to GRUB and isolinux in performance. In addition, it demonstrates the booter programs by sample systems. 3.1. Booting Booting, which is short for bootstrap, refers to the process of loading an operating system image into computer memory and starting up the operating system. As such, it is the first step to run an operating system. Despite its importance and widespread interests among computer users, the subject of booting is rarely discussed in operating system books. Information on booting are usually scattered and, in most cases, incomplete. A systematic treatment of the booting process has been lacking. The purpose of this chapter is to try to fill this void. In this chapter, we shall discuss the booting principle and show how to write booter programs to boot up real operating systems. As one might expect, the booting process is highly machine dependent. To be more specific, we shall only consider the booting process of Intel x86 based PCs.
[Show full text]
Intel® Desktop Boards BIOS Settings Dictionary – Alphabetical the BIOS
BIOS Settings Dictionary – Alphabetical Intel® Desktop Boards BIOS Settings Dictionary – Alphabetical The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. The following menus are available: Menu Title Purpose Maintenance Clears passwords and displays processor information. The maintenance menu is displayed only when the Desktop Board is in Configure Mode. Manageability Configure options associated with Intel® Platform Administration Technology. Main Displays processor and memory configuration. Advanced Configures advanced features available through the chipset. Security Sets passwords and security features. Power Configures power management features and power supply controls. Boot Selects boot options. Intel® ME Configures options for the Intel® Management Engine and Intel® Active Management Technology. Exit Saves or discards changes to Setup program options. The presence of menus and BIOS settings are dependent on your board model, hardware components installed, and the BIOS version. BIOS menu titles may differ. If any problems occur after making BIOS settings changes (poor performance, intermittent issues, etc.), reset the desktop board to default values: 1. During boot, enter the BIOS setup by pressing F2. 2. Press F9 to set defaults. 3. Press F10 to Save and Exit. If the system locks or won’t boot after making BIOS settings changes, perform
[Show full text]
BIOS Boot Specification
Compaq Computer Corporation Phoenix Technologies Ltd. Intel Corporation BIOS Boot Specification Version 1.01 January 11, 1996 This specification has been made available to the public. You are hereby granted the right to use, implement, reproduce, and distribute this specification with the foregoing rights at no charge. This specification is, and shall remain, the property of Compaq Computer Corporation (“Compaq”), Phoenix Technologies Ltd (“Phoenix”), and Intel Corporation (“Intel”). NEITHER COMPAQ, PHOENIX NOR INTEL MAKE ANY REPRESENTATION OR WARRANTY REGARDING THIS SPECIFICATION OR ANY PRODUCT OR ITEM DEVELOPED BASED ON THIS SPECIFICATION. USE OF THIS SPECIFICATION FOR ANY PURPOSE IS AT THE RISK OF THE PERSON OR ENTITY USING IT. COMPAQ, PHOENIX AND INTEL DISCLAIM ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND FREEDOM FROM INFRINGEMENT. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, NEITHER COMPAQ, PHOENIX NOR INTEL MAKE ANY WARRANTY OF ANY KIND THAT ANY ITEM DEVELOPED BASED ON THIS SPECIFICATION, OR ANY PORTION OF IT, WILL NOT INFRINGE ANY COPYRIGHT, PATENT, TRADE SECRET OR OTHER INTELLECTUAL PROPERTY RIGHT OF ANY PERSON OR ENTITY IN ANY COUNTRY. Table of Contents 1.0 INTRODUCTION 5 1.1 REVISION HISTORY 5 1.2 RELATED DOCUMENTS 5 1.3 PURPOSE 5 1.4 TERMS 6 2.0 OVERVIEW 9 2.1 DESCRIPTION 9 3.0 IPL DEVICES 10 3.1 REQUIREMENTS FOR IPL DEVICES 10 3.1.1 IPL TABLE 10 3.1.2 PRODUCT NAME STRING 11 3.2 BAIDS 11 3.3 DEVICES WITH PNP EXPANSION HEADERS
[Show full text]
Ubuntu Linux Setup Guide
Ubuntu Linux Setup Guide For ThinkStation P330 Official Support of Ubuntu 16.04.5 and later Section 1 - BIOS Setup and Pre-Installation Steps The first step before installing Linux is to make sure BIOS is setup correctly • For UEFI/GPT Installations (Recommended): o Boot into BIOS by pressing the F1 function key at the “Lenovo” splash screen o Tab over to the Exit menu tab, and set OS Optimized Defaults to Enabled o Select “Yes” at the confirmation screen indicated below o Tab over to the Security menu tab, select Secure Boot, and set the option to Disabled o Press F10 to “Save and Exit” the BIOS setup menu o Insert the Ubuntu install media (either through USB or CD/DVD) o Power on the system and press the F12 function key whenever the following Lenovo splash screen appears o Select the Linux bootable installation media UEFI option from the F12 boot menu • For Legacy/MBR installations (not recommended): o Boot into BIOS by pressing the F1 function key at the “Lenovo” splash screen o Tab over to the Exit menu tab, and set OS Optimized Defaults to Disabled o Select “Yes” at the confirmation screen indicated below o Select F10 to “Save and Exit” BIOS o Insert the Ubuntu installation media (either through USB or CD/DVD) o Power on the system and press the F12 function key whenever the following Lenovo splash screen appears o Select the Linux bootable installation media Legacy option from the F12 boot menu Section 2 – Installing Ubuntu 16.04 LTS Please refer to the following instructions and screenshots on how to install Ubuntu 16.04 LTS on
[Show full text]
Hardware Components and Internal PC Connections
Technological University Dublin ARROW@TU Dublin Instructional Guides School of Multidisciplinary Technologies 2015 Computer Hardware: Hardware Components and Internal PC Connections Jerome Casey Technological University Dublin, [email protected] Follow this and additional works at: https://arrow.tudublin.ie/schmuldissoft Part of the Engineering Education Commons Recommended Citation Casey, J. (2015). Computer Hardware: Hardware Components and Internal PC Connections. Guide for undergraduate students. Technological University Dublin This Other is brought to you for free and open access by the School of Multidisciplinary Technologies at ARROW@TU Dublin. It has been accepted for inclusion in Instructional Guides by an authorized administrator of ARROW@TU Dublin. For more information, please contact [email protected], [email protected]. This work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 4.0 License Higher Cert/Bachelor of Technology – DT036A Computer Systems Computer Hardware – Hardware Components & Internal PC Connections: You might see a specification for a PC 1 such as "containing an Intel i7 Hexa core processor - 3.46GHz, 3200MHz Bus, 384 KB L1 cache, 1.5MB L2 cache, 12 MB L3 cache, 32nm process technology; 4 gigabytes of RAM, ATX motherboard, Windows 7 Home Premium 64-bit operating system, an Intel® GMA HD graphics card, a 500 gigabytes SATA hard drive (5400rpm), and WiFi 802.11 bgn". This section aims to discuss a selection of hardware parts, outline common metrics and specifications
[Show full text]
1 Configuring SATA Controllers A
RAID Levels RAID 0 RAID 1 RAID 5 RAID 10 Minimum Number of Hard ≥2 2 ≥3 ≥4 Drives Array Capacity Number of hard Size of the smallest (Number of hard (Number of hard drives * Size of the drive drives -1) * Size of drives/2) * Size of the smallest drive the smallest drive smallest drive Fault Tolerance No Yes Yes Yes To create a RAID set, follow the steps below: A. Install SATA hard drive(s) in your computer. B. Configure SATA controller mode in BIOS Setup. C. Configure a RAID array in RAID BIOS. (Note 1) D. Install the SATA RAID/AHCI driver and operating system. Before you begin, please prepare the following items: • At least two SATA hard drives or M.2 SSDs (Note 2) (to ensure optimal performance, it is recommended that you use two hard drives with identical model and capacity). (Note 3) • A Windows setup disk. • Motherboard driver disk. • A USB thumb drive. 1 Configuring SATA Controllers A. Installing hard drives Connect the SATA signal cables to SATA hard drives and the Intel® Chipset controlled SATA ports (SATA3 0~5) on the motherboard. Then connect the power connectors from your power supply to the hard drives. Or install your M.2 SSD(s) in the M.2 connector(s) on the motherboard. (Note 1) Skip this step if you do not want to create RAID array on the SATA controller. (Note 2) An M.2 PCIe SSD cannot be used to set up a RAID set either with an M.2 SATA SSD or a SATA hard drive.
[Show full text]
C:\Documents and Settings\Tikkanenp\My Documents
HP BIOS Flash UpdateBios Flash Update This BIOS Flash Update SoftPaq contains utilities and images that can be used to restore or upgrade the system BIOS on HP workstations. Several methods for changing the BIOS version on your computer may be chosen. Included are the various ways to perform the update. Each folder provided has self-contained files to perform the BIOS update and any unwanted folders may be deleted. I want to update my BIOS in Windows XP Professional x64 Edition I want to create a DOS diskette for BIOS flashing using a Windows Operating System I want to build a ROMPaq diskette to update my BIOS. I want to update my BIOS in Windows XP, 2000, or 98. I want to build a ROMPaq CD to update my BIOS. I want to create a bootable USB Key I want to update my BIOS from a USB flash media device in Windows XP, 2000, or 98. I want to update my BIOS from a DOS bootable USB flash media device. I want to use System Software Management (SSM). I want to use HP Client Manager Software (HPCMS). I want to use network BIOS flashing capabilities. I want to update my BIOS on a system with no floppy diskette drive. My system tells me that my system flash ROM image is corrupted. Folder and flash methods general descriptions. General Descriptions Utilities and appropriate BIOS images are contained in each of the directories as follows: DOS Flash - DOS utility that can be used locally or with a Preboot eXecution Environment (PXE) management application to update or restore the system BIOS.
[Show full text]
SMM) Xeno Kovah && Corey Kallenberg Legbacore, LLC All Materials Are Licensed Under a Creative Commons “Share Alike” License
Advanced x86: BIOS and System Management Mode Internals System Management Mode (SMM) Xeno Kovah && Corey Kallenberg LegbaCore, LLC All materials are licensed under a Creative Commons “Share Alike” license. http://creativecommons.org/licenses/by-sa/3.0/ ABribuEon condiEon: You must indicate that derivave work "Is derived from John BuBerworth & Xeno Kovah’s ’Advanced Intel x86: BIOS and SMM’ class posted at hBp://opensecuritytraining.info/IntroBIOS.html” 2 System Management Mode (SMM) God Mode AcEvate 3 Batteries Not Included! From http://support.amd.com/us/Processor_TechDocs/24593.pdf 4 System Management Mode (SMM) Overview • Most privileged x86 processor operating mode • Runs transparent to the operating system • When the processor enters SMM, all other running tasks are suspended • SMM can be invoked only by a System Management Interrupt (SMI) and exited only by the RSM (resume) instruction • Intended use is to provide an isolated operating environment for – Power/Battery management – Controlling system hardware – Running proprietary OEM code – etc. (anything that should run privileged and uninterrupted) 5 System Management Mode (SMM) Overview • The code that executes in SMM (called the SMI handler) is instantiated from the BIOS flash • Protecting SMM is a matter of protecting both the active (running) SMRAM address space but also protecting the flash chip from which it is derived – Protect itself (SMBASE (location), SMRAM Permissions) – Write-Protect Flash • So far in our research, only about 5% of SMRAM configurations were directly unlocked and vulnerable to overwrite • However, since > 50% of the BIOS flash chips we've seen are vulnerable, that means > 50% of SMRAM will follow suit 6 System Management Interrupt (SMI) • SMM can only be invoked by signaling a System Management Interrupt (SMI) • SMI’s can be received via the SMI# pin on the processor or through the APIC bus • SMI’s cannot be masked like normal interrupts (e.g.
[Show full text]