COMPUTER & ENGINEERING PROGRAMS
albanytech.edu
® COMPUTER & ENGINEERING PROGRAMS
Civil Engineering Technology Computer Programming Computer Support Specialist Cybersecurity Design & Media Production Technology Networking Specialist Electrical & Computer Engineering Technology Electronics Technology Engineering Graphics
For up-to-date program offerings, please refer to the Albany Technical College website at www.albanytech.edu/academics/areas-of-study
Albany Technical College is accredited by the Commission on Colleges of the Southern Association of Colleges and Schools to award Associate of Applied Science Degrees. Contact the Commission on Colleges at 1866 Southern Lane, Decatur, Georgia 30033-4097 or call 404-679-4500 for questions about the accreditation of Albany Technical College. DEGREE CERTIFICATE Civil Engineering Engineering Technology Fundamentals
CIVIL ENGINEERING TECHNOLOGY Individuals with interest in drawing and/or building might consider studying civil Graduates of this program earn a Civil Engineering Technology Associate of engineering technology to learn skills ranging from computer-aided drafting (CAD) Applied Science degree in one of two specialization areas― general engineering to solving problems that affect the built environment. With a growing economy, or surveying. Opportunities for employment also exist in supporting commercial, civil engineering technologists will be needed to support the planning, analysis, residential, and land development as well as within non-civil engineering firms, design, and construction of higher-capacity transportation, water supply, pollution such as management consulting or computer services firms. control systems, and large buildings and building complexes. They are often part of the design process, from the construction costs and expected lifetime of a project, OPPORTUNITIES FOR CONTINUED EDUCATION to government regulations and potential environmental hazards. In addition, Graduates might choose to earn a bachelor’s degree by continuing their studies along with the construction of new highways, bridges, utilities, and other major at a four-year institution of higher learning such as Valdosta State University or infrastructure projects, they will also be needed to repair or replace existing public Savannah State University. structures.
This program prepares students for immediate employment at the technical level in engineering design, drafting, surveying, and construction. The program will provide theory and practice to move into the workforce with engineering consultants, surveying firms, state and local government, public works, construction companies, highway departments, and soil and material testing firms.
DEGREE DIPLOMA CERTIFICATES Computer Programming Computer Programming Java Programmer PHP Programmer
COMPUTER PROGRAMMING This program is for those students who enjoy primarily working alone and are The Computer Programming program offers a Computer Programming Associate interested in developing and using critical thinking, problem-solving, and analytical of Applied Science degree or a diploma, with embedded Technical Certificates of skills in preparation for becoming an information technology (IT) professional. Credit (TCC) - Java Programmer Certificate and PHP Programmer Certificate. Computer programmers figure out the process of designing, writing, testing, debugging and/or troubleshooting, and maintaining the source code of computer Potential career paths include computer programmer, application programmer, programs. This source code is written in a programming language recognized by programmer analyst, web developer, software developer, and SQL programmer. the computer. Through this program, students will learn the concepts, principles, and techniques required in computer information processing as well as the ability OPPORTUNITIES FOR CONTINUING EDUCATION to write computer software. Graduates of this program have pathway options to a four-year institution of higher learning to further their education in this field. Albany Technical College has For successful completion of this program, students will demonstrate the established degree transfer agreements with the following institutions: Albany fundamentals of structured programming; use such tools as structure charts, State University, Clayton State University, Georgia Southwestern State University, flowcharts, and pseudocode; demonstrate knowledge of structured programming Columbus State University, and Valdosta State University. and an understanding of program development methodology; perform debugging techniques; and know how to create, edit, and execute a program.
Program graduates will be competent in the technical areas of SQL, XHTML, systems analysis and design, database management, networking concepts, and the programming languages PHP, Visual BASIC, Java, C++, and JavaScript. DEGREE DIPLOMA CERTIFICATE Computer Support Specialist Computer Support Specialist Microsoft Office Applications Specialist
COMPUTER SUPPORT SPECIALIST The Computer Information Systems (CIS) Computer Support Specialist program This program offers a Computer Support Specialist Associate of Arts degree or a covers concepts, principles, and techniques required in computer information diploma with Technical Certificates of Credit (TCC) in Microsoft Office Application processing, including the technical areas of computer terminology and concepts, Specialist, Help Desk Specialist, Computer Hardware & Network Technician, and program design and development, and computer networking. Computer support Computer TIA A+ Certified Technician Preparation. Program graduates are qualified specialists provide help and advice to computer users and organizations. These for employment as computer support specialists. specialists either support computer networks or provide technical assistance directly to computer users. Currently, CIS graduates are employed locally at the City of Albany, Phoebe Putney Memorial Hospital, Albany Technical College, MCLB, P&G, CTSI, Miller-Coors and Hands-on training in this program takes place in personal workstations or school systems around the state. small groups. Successfully learning these skills will allow graduates to enter the competitive workforce as helpdesk technicians, PC repair and networking technicians, database administrators, and entry-level information security specialists. Additional options are Microsoft Office specialists in Microsoft Excel, Word, Access, PowerPoint, and Outlook.
DEGREE DIPLOMA CERTIFICATE Cybersecurity Cybersecurity Cybersecurity
CYBERSECURITY As the Internet grows, so does cybercrime. Luckily for cybersecurity professionals, This program offers a Cybersecurity Associate of Arts degree, or a diploma with this generates great demand for jobs in a field that is growing rapidly. Technical Certificates of Credit (TCC) in Cybersecurity, Computer Forensic and Cybersecurity has expanded from use among only government agencies and Investigation Specialist, and Cyber Crime Specialist. Program graduates are defense contractors and has become much more widely used in industries such as qualified for employment as information security specialists and are prepared to health care, finance, manufacturing, and retail. All of these now hire cybersecurity begin and progress into technology and network security careers in government, professionals to protect valuable information from cyber breaches. military, manufacturing, service, education, and other private, public and nonprofit sectors. The Cybersecurity program at Albany Tech provides students with an understanding of the concepts, principles, and techniques required in the acquisition, recording, organization, retrieval, display, and dissemination of information. The course work will teach students to create and execute a digital security strategy that supports and defends data resources managed by an employer. DEGREE DIPLOMA CERTIFICATES Graphic Design and Prepress Graphic Design and Prepress Advertising Layout Specialist Photography Photography Design and Media Production Specialist Digital Illustration Specialist Graphic Design and Prepress Technology Photographer
DESIGN & MEDIA PRODUCTION TECHNOLOGY Students interested in a career with a creative element enhanced by the latest The Design and Media Production Technology curriculum is accredited by PrintED technology for design and photography should consider Design & Media through the Graphic Arts Education and Research Foundation (GAERF). Production Technology (DMPT). This program offers students a solid foundation in developing their visual communication and creative design skills using industry- Students can earn a Design and Media Production Technology Associate of Applied standard software and digital single-lens reflex (DSLR) cameras. Science degree, or a diploma with Technical Certificates of Credit (TCC) in Graphic Design/Prepress and Photography. At the completion of this program, students will Graphic design and prepress include learning the principles and elements of have a portfolio of work showcasing their skills, ability, and style. Many graphic designing printed pages for products such as booklets and brochures, posters, and designers are employed in specialized design and professional services such as greeting cards, using Adobe InDesign, Illustrator, and Photoshop software on Mac publishing, advertising, public relations, print centers, and related services. Another computers. Prepress focuses on the process involved in preparing and finishing option for designers and photographers is to be self-employed, establishing a base design projects that are printed in a print center or print shop. of clients for whom they complete projects.
DMPT also has a photography specialization that begins with learning the basics OPPORTUNITIES FOR CONTINUING EDUCATION of photography in the Photography I and II courses, focusing on composition, After earning an associate degree in this program, many students choose to exposure, and lighting techniques. The remaining classes include portraiture, continue their education to earn a bachelor’s or higher degree in this field. documentary photography, and production/studio photography, taking students deeper into those disciplines.
DEGREE DIPLOMA CERTIFICATES Networking Specialist Networking Specialist Home & Small Business Networking Cisco Certified Entry Network Technician Cisco Network Specialist Microsoft Network Administrator Preparation for A+ PC Repair and Network Technician
NETWORKING SPECIALIST This program attracts students interested in hands-on and real-world education Students will earn a Networking Specialist Associate of Applied Science degree, leading to careers in information technology (IT) and related fields. Skills taught or a diploma with Technical Certificates of Credit (TCC) in Network Administrator, in these courses will enable students to provide network technical support for Microsoft Network Administrator, Preparation for A+ Certification, and PC Repair a wide variety of employers. Areas of competency include but are not limited & Network Technician (embedded in the degree/diploma). TCC (stand-alone or to the installation, upgrades, and configuration of file servers; back-up units; embedded) are available in Home & Small Business Networking, CISCO Certified workstations; network printers; and software. Entry Network Technician, and CISCO Network Specialist. OPPORTUNITIES FOR CONTINUING EDUCATION Students will also learn the fundamentals of the LAN and WAN technologies; how Albany Technical College has established degree transfer agreements with Albany to implement, administer, and troubleshoot systems; demonstrate decision-making State University, Clayton State University, Georgia Southwestern State University, and problem-solving techniques; and basic router configuration. Graduates will Columbus State University, and Valdosta State University. qualify for potential career paths and positions such as computer and network support, network operations specialist, network specialist, entry-level network engineer, or network support specialist. DEGREE SPECIALIZATIONS CERTIFICATE Computer Engineering Technology Computer Engineering Technology Electronics Engineering Technology Electromechanical Engineering Technology Telecommunications Engineering Technology
ELECTRICAL & COMPUTER ENGINEERING TECHNOLOGY This field involves the design and development of new electrical systems and Program graduates will receive an Electronics and Computer Engineering computer applications. Electrical and Computer Engineering Technology students Technology Associate of Applied Science degree, qualifying them as engineering should have a strong desire to design and build electrical systems and have an technicians with a specialization in Computer Engineering Technology, Electronics interest in learning how analytical methods and computer simulations are used Engineering Technology or Electromechanical Engineering Technology with to design electrical systems. The program of study emphasizes the application Technical Certificates of Credit (TCC) available in Computer Engineering Technology of scientific, mathematic, and engineering knowledge and methods combined (embedded) or Unmanned Aerial Systems Technology (stand-alone). Graduates with technical skills in support of engineering activities. The discipline prepares will be eligible for careers such as computer engineering technician, network students to work in a wide variety of companies in the computer, medical technician, or electronics technician. electronics, and other technical fields. OPPORTUNITIES FOR CONTINUED EDUCATION In this program, students can be creative while learning to use applications that Students are encouraged to continue their education at a four-year institution such will come into play in the workplace. Students not only learn how to work with as Albany State University, Savannah State University, Kennesaw State University, robots and other electronics, but also get to create things they are personally and others offering electrical and computer engineering degrees. interested in designing or building. Upon completion of this course, graduates will be able to identify electrical and computer components as well as organize them to design or build a new device or component.
DEGREE SPECIALIZATION DIPLOMA SPECIALIZATION CERTIFICATE Field Occupation Field Occupation Basic Electronics Technician
ELECTRONICS TECHNOLOGY Electronics technology is a field that covers the construction, operation, OPPORTUNITIES FOR CONTINUING EDUCATION maintenance, and repair of electrical and electronic equipment. This program is The Electronics Technology program at Albany Technical College has pathways ideal for those students interested in learning to build, test, troubleshoot, maintain, programs established with Albany State University, Fort Valley State University, and repair the electronic components and equipment used in any device or piece Kennesaw State University, and Valdosta State University for students interested of equipment powered by electricity. in obtaining a bachelor’s degree in this field of study. It is ideal preparation for students who continue their education by specializing in avionics, fiber optics, and The program prepares students for careers in electronics professions by wireless communication, among others. emphasizing a combination of electronics technology theory and practical application, using both manual and computerized electronics systems. Among the skills taught are how to identify all the components on a circuit board and how they work. Students will also learn troubleshooting techniques. All courses have lab components for practical hands-on application experience.
Electronics Technology program graduates receive an Electronics Technology Associate of Applied Science degree or diploma, which qualifies them as electronics technicians with a specialization in biomedical instrumentation, communications electronics, computer electronics, general electronics, industrial electronics, or telecommunications electronics. DEGREE SPECIALIZATIONS DIPLOMA SPECIALIZATIONS CERTIFICATES Architectural Drafting Architectural Drafting AutoCAD Refresher Civil Drafting Civil Drafting 3D Printing and Rapid Prototyping Mechanical Drafting Mechanical Drafting CAD Operator Drafters Assistant
ENGINEERING GRAPHICS This program allows students to bring some imagination to life through the The Engineering Graphics program offers two specializations―Architectural and assistance of 3D printing used to create a physical model of any design created Mechanical―both with an associate degree, diploma, and certificate options with CAD software. From residential design to prosthetic limbs, the variety of 3D available. Upon completion of the program, students often find work with architect printing materials and printers available today allow students to make any random firms and local contractors. It’s not uncommon for students to work for themselves idea a tangible item. doing freelance work before they branch out to other employment opportunities. OPPORTUNITIES FOR CONTINUING EDUCATION Engineering Graphics is an advancement of traditional drafting practices that takes Students that wish to continue their education beyond an associate degree will full advantage of technological advancements of the field to prepare students have pathway opportunities available with Albany State University, Georgia Military for employment in a variety of positions in the engineering graphics field, such College, Valdosta State University, and Kennesaw State University. as drafter or CAD operator, based on the specialization area a student chooses to complete. Students will learn a variety of software applications to produce 2D and 3D models for architectural and mechanical design.
®
ADMISSIONS TESTING FINANCIAL AID ATC uses the Accuplacer-Next Generation exam for measuring ATC offers several types of financial assistance to help qualified applicants proficiency in reading, writing and math. Applicants must achieve pay for their education. Funds are available through the Federal Pell Grant, the minimum admissions scores on the exam as specified in the program Federal Supplemental Educational Opportunity Grant, Federal Work-Study and state standards or acceptable scores on a statistically validated the Georgia HOPE programs. Students may also receive assistance through the test such as the SAT or ACT. Program-specific entrance scores Job Training Partnership Act, operated by the Georgia Department of Labor, or are a minimum requirement, and higher scores may be required. the Veterans Educational Assistance Program, administered by the Department Reasonable accommodations are made during testing for those who of Veteran’s Affairs. Sufficient financial assistance is available to provide the need them. (The examiner should be notified prior to testing.) opportunity for eligible students to attend college. Grant and scholarship programs operate on an award-year beginning in August and ending in July. Students must apply or re-apply each year to receive or continue to receive financial aid. THE FOCUS IS ON OUR STUDENTS
We measure our success by your success. Albany Technical College (ATC) is a public two-year institution committed Albany Tech is charged with providing education opportunities to the to providing higher education and life-long learning opportunities that residents, businesses and industries within a seven-county service promote self-sufficiency, economic development, and community growth delivery area. These counties include Baker, Calhoun, Clay, Dougherty, Lee, and sustainability. ATC prepares students and graduates to meet dynamic Randolph and Terrell. Today, more than 3,000 full-time students are enrolled and evolving workforce needs, utilizing industry-driven teaching and in credit programs per semester. Another 2,500 are enrolled part-time learning approaches including traditional, online, and customized business and in seminars, continuing education courses, teleconferences and solutions. ATC offers over 200 certificate, diploma and associate degree customized business training. All of our graduates receive job placement programs designed to provide students with the most marketable skills for services from our Career Services department. The result? Ninety-eight the fastest-growing fields and professions. We stand behind that promise percent of our graduates are employed. by providing a warranty for all our graduates. Any graduate who does not meet the program standards will be re-educated at no cost to the graduate or to the employer. ®
Dougherty County Campus: 229.430.3500 | Randolph County Learning Center: 229.732.5280 albanytech.edu
Facebook “f” Logo CMYK / .ai
Albany Technical College and the Technical College System of Georgia are equal opportunity employers and offers career and technical education programs for all regardless of race, color, creed, national or ethnic origin, gender, religion, disability, age, political affiliation or belief, genetic information, disabled veteran, veteran of the Vietnam Era, spouse of military member of citizenship status (except in those special circumstances permitted or mandated by law). This non-discrimination policy encompasses the operation of all technical college-administered programs, programs financed by the federal government including any Workforce Investment Act of 1998 (WIA) Title I financed programs, educational programs and activities, including admissions, scholarships and loans, student life, and athletics. It also encompasses the recruitment and employment of personnel and contracting for goods and services.
Albany Technical College offers additional services to students with limited English language skills or with disabilities so that they may benefit from these programs.
Revised April 2020