Cutrite Bind-Up Instructions

Total Page:16

File Type:pdf, Size:1020Kb

Cutrite Bind-Up Instructions See a video on how to use The CutRite™ Bind Up tool at http://www.quiltersparadiseesc.com/Online Shopping/Notions/Bind Up Video.htm. L The CutRite™ Bind Up tool is used to join the two ends of CutRite™ your quilt’s binding. BindR Up Instructions Attach your binding, as you normally do, until there are approximately 10 inches remaining with 5 inches to the left of the Step 1 Quilt Take both unsewn ends of the binding and fold each side back onto itself, ensuring that the folds Binding Left side Binding Right side touch each other in the center. Press with an iron. Fold both sides of binding out. Center folds touch each other. Step 2 Open the left binding end so Quilt that the wrong side is face up. Ironed Crease Binding Left side Binding Right Side Open up Binding Step 3 Quilt Mark the lengthwise and widthwise folds with a marking tool such as a pencil. Repeat for both sides of binding. Binding Left side Binding Right Side . Mark Creases L side up Step 4 t Side Position the CutRite igh Bind Up tool so that the ‘L’ on Binding R the tool is face up, facing you uilt Line up crosses in the upper left. Place the Q L intersection of the length L and width lines of the tool over the intersec- CutRite™ tion of the crease. BindR Up CutRite™ Then cut the along t side ef the diagonal. BindR Up Binding L Step 5 Binding L Repeat Step 4 for the R side up right binding strip. To do so, ef Q t side uilt rotate the CutRite Bind Up tool so that the ‘R’ is face up, facing you in the Bind Up RBind upper right. Bind Up RBind CutRite™ CutRite™ Binding R L igh t Side Line up crosses L Step 6 Step 7 Align the CutRite Bind Up tool evenly Put the right sides together from the left and right binding with the bottom of the cut binding strips along the diagonal edge. Sew the left and the right binding and then cut o the tip on both the strips together using a ¼-inch seam allowance and attach to quilt. right and left binding. L Sew t side ef Binding R CutRite™ igh BindR Up Binding L t Side ©2010 Quilter’s Paradise.
Recommended publications
  • Free Pattern Instructions Best Nest Organizer Basket
    Fold 42" Quilted Hanging Basket Front Cut 1 on fold d l e on fo on e ont - plac fr Center Gather Quilted Hang ing Basket Gusset Cut 1 on fold -or- Cut 2 with seam allowance Free Pattern Instructions Pattern Free 21" Quilted Hanging Basket Back ld n fo n Cut 1 on fold o ce - pla ont er fr er t en C Layout Option 2: Layout From binding fabric, cut 2¼" wide cut strips bias equal fabric, to binding From 120". 118" to approximately seam to using a diagonal end, to end strips, binding Join Trim the seam open. then seams flat, Press bulk. reduce if ¼", needed. to allowances Careful meeting edges even. long in half, the binding Press press. the fabric as you stretch not to - the guidelines using a fabric marking pencil, pen or Mark, piece. pattern gathering the front for on as indicated Cut on fold Center base seam cutting line Fold • binding: the Create • • • 6" 3. 18" - Quilted Hanging Basket et Bask ing ang H Quilted Front ont Fr Cut 1 on fold fold on 1 t Cu d d l l e on fo e fo on e 42" t - plac t - plac ter fron ter fron ter n n Ce Ce Gather Gather et et ing Bask Bask ing ng ng Ha Ha Quilted Quilted t t e e k k s s a a B B g g in in g g n n a a H H d d te te il il u u Q Q ld ld t t se se s s Gu Gu k k c c a a B B d d ol ol f f n n o o ut 1 1 ut C C n fo n fo o o d d l l fo fo n n o o 1 1 t t u u C C r- r- -o -o ce ce ce ce n n wa wa allo allo m m a a th se se th wi wi 2 2 ut ut C C - pla - pla ont ont er fr er er fr t t en en C C Best Nest Organizer Basket Organizer Best Nest Layout Option 1: Layout yd.
    [Show full text]
  • Placket Construction Options
    Placket Construction Options 1 Type1: Two Separate Bound Edges on a rectangular stitching box The key to this structure is that the bindings are initially stitched only to the seam allowances on each side, and NOT stitched across the end, of the clipped box, which means that they, and the clipped triangle at the bottom, remain loose and can be arranged before the nal nishing to go on either side of the fabric, as well as either over or under the other, after joining them at the sides. The widths and lengths of the bindings and the space between the sides of the clipped box determine all the other options available in this most exible of all the placket types I know of. Variation 1: Both bindings t inside the stitching box If you cut the bindings so the nished, folded widths of both are equal to or smaller than the space between the initial stitching lines, as shown above, you can arrange both ends at the clipped corners to all go on one side of the fabric (right or wrong side), along with the clipped triangle on the garment. You’ll get the best results if the underlapping binding is slightly smaller than the overlapping one. This can be man- aged by taking slightly deeper seam allowances when you join this piece, so they can initially be cut from the same strip. Or, you can place one end on each side with the Both ends on RS One end on RS, Both ends on WS triangle sandwiched in between.
    [Show full text]
  • Stay Tapes Sheet( Notions)
    Emma Seabrooke, C.S.I. Knit Patterns for the Hard To Fit Certified Fit & Pant • Palmer/Pletsch Instructor SewkeysE stay tapes are all FUSIBLE Price is $8.50 on-line, except as noted. Double Sided Stay Tape – 1/4" wide by 25 yards, color: clear SSI Knit Stay Tape – for invisible control 1/2" wide by 25 yards, color: clear 1" wide by 25 yards, colors: black, white 1" wide by 25 yards, color: clear ($13.50 online) 1/2" wide by 25 yards, colors: black, white Knit Stay Tape/Interfacings – Woven/Straight Stay Tape – 1/2" wide by 25 yards, colors: black, white, ivory 1/2" wide by 25 yards, colors: black, white, natural 1" wide by 25 yards, colors: black, white, ivory 1 1/4" wide by 25 yards, color: black, white, natural 1 1/4" wide by 25 yards, colors: black, white, ivory FOR HEMS: FOR SEAMS: 1/2" KNIT stay tape for narrow hems or very wide For shoulder seams use 1/2" WOVEN/STRAIGHT stay tape. hems on knit and or light weight fabrics. For the crotch seam use 1/2" WOVEN/STRAIGHT stay tape. 1/2" STRAIGHT stay tape for narrow or wide For light weight side and sleeve seams use 1/2" KNIT hems on woven fabric or fabric that you do not wish to stay tape. It supports side and sleeve seams in fabric that have give or stretch. is sheer or needs help to be stable, allowing the fabric to One inch or 1 1/4" STAY TAPE/INTERFACING for a go through a sewing machine and serger without 1” or 1 1/4" hem on knit and or light weight fabrics.
    [Show full text]
  • Clothing Revue Scoresheets
    Sewing I J;Vl100.Q-1BBB Super S mp e Skirt Scoresh et�()�� * Rate 1-5 I. Fabric A. On grain? .................................................................................................. B. Well pressed, freefrom wrinkles? ............................................................ II. Seams A. Finished appropriately? ............................................................................ B. Even width appropriate forseam finish? .................................................. C. Pressed open? ........................................................................................... III. Stitching A. Thread matches? ....................................................................................... B. 10-12 stitches per inch? ............................................................................ C. Tension balanced? ................................................................................... .. D. Backstitched/overlapped at beginning and end of seams and hems? ....... IV. Casing A. Even width - 1 1/4" - 1 1/2"? .................................................................... B. Elastic straight? ........................................................................................ C. Casing stitched close to lower edge? ....................................................... V. Hem A. 2" in width? .............................................................................................. B. Pressed nicely? ........................................................................................
    [Show full text]
  • NOTIONS PERMIT Functional Additions to Fabric This Tutorial Is Provided for Free
    NOTIONS PERMIT Functional additions to fabric This tutorial is provided for free. It is for personal use, but may be shared in a social sewing group or public school to teach others. It is not to be distributed online. It may not be used as learning material in a paid sewing lesson. Direct others to the Pattern Orchard website to obtain their own copy. The information provided in this tutorial is general in nature. Different terminology may be used by sewers from different backgrounds and the sewing equipment used is based on commonly purchased items available in 2017 in Australia. Some older or newer equipment may have settings or options that differ from the examples given. Please share the www.patternorchard.com link with anyone who is interested in learning to sew or furthering their sewing skills. There are free Learning Patterns available on the website for personal use or donations for charities. Tag #PatternOrchard on social media when sharing photos of items made from a Pattern Orchard pattern to spread the word about this free resource. This tutorial is suitable for most kids over the age of 8 with adult supervision for all sewing practice. Never leave kids unsupervised around sharp objects or machines. Plain language is used to gradually introduce some basic sewing terminology. Read through this document and complete the check list on page 10 to achieve your Notions Permit. Only pages 9 & 10 need to be printed. NOTIONS PERMIT Topics covered Page 3. Notions [Description, Choices, Substitution] Page 5. Sewing [Zippers, Buttons, Press Studs] Page 7.
    [Show full text]
  • Using the Zip Bind System & Stitch in the Ditch Binding Foot
    Using the Zip Bind System & Stitch in the Ditch Binding Foot – Updated Feb. 2017 Congratulations on purchasing the Zip Bind System and Stitch in the Ditch Binding Foot (SND)! These directions are provided to help you use these tools to bind quilts, table runners, jackets, placemats, etc. We hope that you will be inspired to use the tools for a wide variety of quilting, sewing and crafting projects as well. I hope you find these directions and videos useful and have many successful experiences with your new tools! Contact us with any suggestions or comments at 850-433-1414 or [email protected]. Linda Winner, Martelli’s Education Director The written directions are divided into the following parts: Part 1: Directions, Videos, an Intro Part 2: Three Ways* to Bind Projects Part 3: The Tools Part 4: Getting Started Part 5: Step-by-Step Directions - written in order of the process Part 6: General Q & A Part 7: What Do Judges Look For? Part 1: Directions, Videos, & an Intro In the past, we offered DVDs but YouTube makes watching and updating videos on cell phones, iPads, etc. so easy! Plus, if we offered a DVD, every time we filmed a video, your DVD would be out of date! Here’s How to Find Written Directions and Videos Online: 1. I recommend going to my website – http://winnerdesigns.com/directions/ - and downloading the latest version of written directions. You’ll find them under Martelli. From your computer, you can click on any link that is underlined in blue. It will take you directly to the related videos.
    [Show full text]
  • Notions: Fabrics: Sewing with Cuddle™
    Fabrics: Sewing with Cuddle™ Notions: 1/2 yard Daisy Bouquet Coral from These patterns are very easy to put Sewing machine Crazy for Daisies by ADORNit (dress) together and sew. Cuddle™ fabric Basic sewing supplies: 1/2 yard Mini Zag Aqua/Red/Breeze works best when you take care to pin Thread from Nested Owls by ADORNit each seam before sewing. You Ballpoint needle (sleeve and ruffle for pants) should be able to complete this Pins 3/4 yard Cuddle™ Dimple Teal (pants) project in under 3 hours! Scissors 1/4” elastic and 3/4” elastic 1 Cuddle™ Bouquet Peasant Dress and Ruffle Pants Below you will find a guide to tape your PDF printed pages together. When you print, make sure to select “actual size” so that your pattern does not print at the wrong scale. Check the 1 inch test box before cutting out your fabric to make sure everything is the right size! Read through each step before beginning your project! If there are any questions please contact me at [email protected] and I will be happy to help you! I drafted these patterns off of my daughter’s measurements. She wears a 24m/2T in ready to wear clothes. The dress is meant to be worn with the ruffle pants. If you prefer to have the dress worn alone, add 3-4 inches to the length. To print only the pattern pieces for the dress, print pages 12-15 To print only the pattern pieces for the pants, print pages 16-18 LEVEL—Beginner Terms of Use: Items made from this pattern may be used to sell in limited quantities.
    [Show full text]
  • Ruffle Sleeve Top Issue 37
    RUFFLE SLEEVE TOP ISSUE 37 SKILL LEVEL In the Folds patterns are designed to inspire and encourage modern makers to create garments that are beautiful both inside ABOUT CONTENTS and out. Through selected techniques and construction details, IN THE In the Folds aims to encourage thought-provoking and ABOUT IN THE FOLDS 3 memorable making experiences - helping you enjoy each stitch in PATTERNS FOLDS the process. PATTERNS GARMENT OVERVIEW 4 Techniques may differ slightly to the home sewing methods you (INCLUDING FABRIC SUGGESTIONS AND NOTIONS) are used to, but in some cases industrial finishes will give you the cleanest and most professional finish. SIZING + GARMENT 5 MEASUREMENTS Seam allowances are marked on each pattern piece and detailed (INCLUDING FABRIC REQUIREMENTS) in each step. You will notice that in some cases the seam allowances meet each PRINTING THE PATTERN 6 other at different angles at the end of the seam. This is so that PRINTING PLAN 7 when you press the seam allowances open the seams will sit flush with the edges and will help you get a really clean finish. CUTTING YOUR FABRIC 8 In the Folds patterns are designed to include thoughtful Consider using fabric SUGGESTED CUTTING PLAN 9 details and interesting techniques so that you can enjoy the from your stash before process of making the garment as much as the end result. going to buy something INSTRUCTIONS 10 new. I dare you. If we slow down and take in every stitch, we can better You might be surprised GLOSSARY 21 our skills, appreciate the amazing things we can do with by what you find there.
    [Show full text]
  • Renaissance Training Curriculum Need More Training?
    Great Notions is committed to helping you succeed; and we realize that our success depends on your success. Our goal is to develop products and services that make your job easier, and in turn help your business be more profitable. Our careful attention to detail sets us apart as we continue to create new products to meet your embroidery needs. We’ll be here for you when you need stock designs, custom digitizing, software and embroidery machines. Great Notions wants you to be successful. That’s why you’ll receive complete support for your machine, software and stock and custom design needs. We are dedicated to helping you express your creativity and develop beautifully embroidered apparel in an systemefficient, reliable, cost-effective manner. Renaissance Embroidery Systems™ The Renaissance line offers full-featured dependable embroidery systems at prices you can afford. After years of development and fine-tuning, you can be assured that you’ll receive a solid dependable embroidery system. 2 Why is Renaissance so affordable? • The Renaissance Systems run from your personal computer, eliminating the onboard computer system that can be difficult to upgrade. • Great Notions manufactures their own equipment which removes the middleman. • Great Notions employs their own software programmers, allowing them to keep everything in-house. All this lets Great Notions bring you an excellent commercial embroidery machine with the most advanced user interface on the market at an exceptional price. 1 3 1. FlexConnect is changing the way you embroider - allowing you to join as many heads as necessary, according to your production needs. You have the option of running the same job on each machine or running independent jobs simultaneously.
    [Show full text]
  • EC71-484 Exalted Notions Jane Speece
    University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Historical Materials from University of Nebraska- Extension Lincoln Extension 1971 EC71-484 Exalted Notions Jane Speece Follow this and additional works at: http://digitalcommons.unl.edu/extensionhist Speece, Jane, "EC71-484 Exalted Notions" (1971). Historical Materials from University of Nebraska-Lincoln Extension. 4076. http://digitalcommons.unl.edu/extensionhist/4076 This Article is brought to you for free and open access by the Extension at DigitalCommons@University of Nebraska - Lincoln. It has been accepted for inclusion in Historical Materials from University of Nebraska-Lincoln Extension by an authorized administrator of DigitalCommons@University of Nebraska - Lincoln. EC 71-484 EXTENSION SERVICE UNIVERSITY OF NEBRASKA COLLEGE OF AGR ICULTURE COOPERATING W ITH THE U.S. DEPARTMENT OF AGRICULTURE AND THE COLLEGE OF HOME ECONOM ICS. E. F FROLIK, DEAN; .J. L. ADAMS, D I RECTOR Ring Buttons The ring used may be of bone, metal or plastic. Plastic EXALTED NOTIONS rings, used for shade pulls or tiebacks, can be bought with several in a package. Size selected should be the size you Jane Speece want the finished button to be. Extension Specialist (Clothing) Any fabric may be used. You may want matching fabric, contrasting fabric, even leather or fur. Cut a circle of fabric Both the woman who enjoys creating her own clothing twice the diameter of the ring. Using a single or double and the woman who would rather purchase her garments thread, take a gathering stitch by hand around the circle know that "it is the little things that count." The glint of a about 1/4 in.
    [Show full text]
  • Notions Department Marian Loofe Iowa State College
    Volume 22 Article 7 Number 7 The Iowa Homemaker vol.22, no.7 1942 Notions Department Marian Loofe Iowa State College Follow this and additional works at: http://lib.dr.iastate.edu/homemaker Part of the Home Economics Commons Recommended Citation Loofe, Marian (1942) "Notions Department," The Iowa Homemaker: Vol. 22 : No. 7 , Article 7. Available at: http://lib.dr.iastate.edu/homemaker/vol22/iss7/7 This Article is brought to you for free and open access by the Student Publications at Iowa State University Digital Repository. It has been accepted for inclusion in The oI wa Homemaker by an authorized editor of Iowa State University Digital Repository. For more information, please contact [email protected]. ~pcdi- sNIP-IT SUPS Easy remedy for H em­ itis. Shorten slips to your height with scis­ sors. Just cut along NGENIOUS is the word for Iowa State women as any of the non-ravel I wartime shortages and rationing bring out re­ hems and cut off the sourceful ideas for getting the most wear from clothes and materials. part that shows. With metal priorities now effective, Iowa State women have been inspired to produce their jewelry from natural materials at hand. Clever lapel pins can be made from holly wood, cut by a power or hand Dressmaker saw into distinctive shapes, with designs burned on to facilitate painting, according to Ann McCormick, Bodice applied art sophomore. Poster paints add color to the gadget and the pin is completed with the addition of a safety pin attached to the under side. Tea rose and white Price $2.25 For Your Typical of the ingenuity shown by the wom­ VAL[NTIN[ en of Iowa State is a hand-knit sweater Georgiana Jensen, dietetics sophomore, is get­ DINN[~ ting double duty wear from her snow suit jacket by using the sheepskin lining as a vest over dresses.
    [Show full text]
  • Beginner Sewing Workshop SUPPLIES.Pages
    BEGINNER SEWING INTENSIVE WORKSHOP SUPPLY LIST: Available to use during class in the Sewing Studio: Cutting Table Sewing machines Steam irons and pressing equipment Student must check out from the UCC Library for use during class: Bernina bobbin case for the studio sewing machines Student must purchase from UCC Bookstore: Bernina bobbins (4-pack) Cutting Tools Dressmaker shears or fabric shears Paper cutting scissors Seam ripper Embroidery scissors or thread snips (optional) Rotary cutter AND cutting mat (optional) Pinking shears (optional) Measuring Tools C-Thru Ruler 2” x 18” 60” Tape Measure Sewing gauge (optional) Hip curve ruler or French curve ruler (optional) Marking Tools mechanical (#2 or HB) lead pencil Tailor’s chalk or Chaco Liner marking tool (by Clover) Serrated tracing wheel “Chacopy” (by Clover) or other brand dressmaker’s carbon / tracing paper Disappearing ink marker (optional) Sewing Notions Straight pins (Clover or other quality brand, extra-fine glass head, silk or fine quilting) Hand sewing needles (milliners or an assortment pack, NOT “quilting betweens”) Pin cushion (magnetic pin cushion is ideal) !1 of 2! BEGINNER SEWING INTENSIVE WORKSHOP SUPPLY LIST: Fabrics and notions needed to complete projects: Top Project : notions: all purpose polyester thread, 3 1/2 yards of double fold bias tape recommended fabrics: light to medium weight fabrics such as cotton voile, lawn, shirtings, lightweight cotton poplin or broadcloth, rayon challis or lightweight shirting blends required yardage: Width of Fabric: Yardage you will
    [Show full text]