Basic Energy Sciences Advisory Committee 1991-1992 Membership

Total Page：16

File Type：pdf, Size：1020Kb

BASIC ENERGY SCIENCES ADVISORY COMMITTEE 1991-1992 MEMBERSHIP Dr. Klaus Berkner Professor W. Carl Lineberger Associate Laboratory Director Department of Chem. and Biochem. for Operations University of Colorado Lawrence Berkeley Laboratory Boulder, CO 80309-0440 Berkeley, CA 94720 Dr. Joanne Martin Professor Robert Birgeneau IBM Corporation Dean of Science Neighborhood Road MIT Kingston, NY 12401 Cambridge, MA 02139-4307 Dr. George Parshall Dr. John D. Bredehoeft Director, Chemical Science USGS E.I. DuPont De Nemours & Company Inc. Menlo Park, CA 94025 P.O. Box 80328 Wilmington, DE 19880-0328 Dr. Paul Fleury Vice President of Research and Dr. Herbert Richardson Exploratoy Technology Vice Chancellor for Engineering Sandia National Laboratory Dean of Engineering P.O. Box 5800 301 Engineering Research Center Albuquerque, NM 87185 Texas A&M University College Station, TX 77843 Dr. Ralph Hardy President, Boyce Thompson Dr. Michael Rowe Inst. for Plant Research Reactor Radiation Division Cornell University NIST Tower Road Gaithersburg, MD 20899 Ithaca, NY 14853-1801 Dr. Leon Silver Prof. George Hegeman Calif. Inst. of Tech. Dept. of Biology 1201 E. California Blvd. Jordan Hall 142 Pasadena, CA 91125 Indiana University Bloomington, IN 47405 Dr. Norman Sutin, Chairman Dept. of Chemistry Professor Adam Heller Brookhaven National Laboratory Department of Chemical Eng. Upton, NY 11973 University of Texas Austin, TX 78712-1062 Dr. Kathleen C. Taylor Physical Chemistry Department Prof. Paul Huray General Motors Research Laboratory Vice Provost 12 Mile & Mound Roads Office of Research Warren, MI 48090 University of South Carolina Columbia, SC 29208 Prof. Louis Testardi Physics Dept. Prof. Hugh Kelly Florida State University Department of Physics 315 Keen Building University of Virginia Tallahassee, FL 32306 Charlottesville, VA 22901 Professor William B. Travers Dept. of Geological Sciences 2102 Snee Hall Cornell University Ithaca, NY 14853 Professor Herbert Yuen Dept. of Mechanical Engineering Northwestern University 2145 Sheridan Road Evanston, IL 60208-3111.

Copy Link

Recommended publications

Dupont™ Teflon® PTFE TE-3876
DuPont™ Teflon® PTFE TE-3876 Aqueous Fluoropolymers made with Echelon™ Dispersion Technology Product Information Aqueous Dispersion Brand hibits, even at high temperature usage, improved durability, Teflon® is a registered trademark of DuPont for its brand of abrasion resistance, flex-life, gloss and color. These charac- fluoropolymer resins, which can only be licensed by DuPont teristics make it specially suited for topcoats in for example for use in approved applications. Customers who wish to metal and glasscloth coatings. use the Teflon® trademark in connection with DuPont DuPont™ Teflon® PTFE TE-3876 is based on new and products under license from DuPont should either contact improved polymer and formulation technologies that ensure (800) 262-2745 in the US or the regional sales office listed at higher product quality and processing improvements in the back of this brochure. Without a license, customers may various coating applications. Teflon® PTFE TE-3876 disper- not identify their product as containing Teflon®, but may refer sion has improved shear resistance, hence is less prone to the resin as PTFE fluoropolymer dispersion TE-3876. to coagulation, and is therefore well suited to processes where high shear is present such as roller and curtain coat- Description ings. Other product improvements include higher gloss, me- DuPont™ Teflon® PTFE TE-3876 fluoropolymer resin is chanical strength and durability, while the processor benefits a negatively charged, hydrophobic colloid, containing from improved Critical Cracking Thickness and improved approximately 60% (by total weight) of 0.05 to 0.5 µm sinterability, which lead to improved productivity and yields. polytetrafluoroethylene (PTFE) resin particles suspended in When properly processed, the PTFE resin in Teflon® PTFE water.
[Show full text]
Dupont Performance Materials a Broad Range of Advanced Solutions for Healthcare Components
DuPont Performance Materials a broad range of advanced solutions for healthcare components DuPont Performance Materials delivers science-based, high quality thermoplastics to the healthcare industry. 1 These thermoplastics are used in the manufacture of demanding components across many different healthcare segments. DuPont Performance Materials… a broad range of advanced solutions for healthcare components DuPont draws on its long experience in materials research, application development, technology, safety and regulatory compliance to provide expert support to healthcare product manufacturers, backed by its global manufacturing and supply strength. The Key Properties Our Materials Can Offer Your Products Depending on the specific High Strength First and foremost, designers are looking for an optimum application, DuPont can deliver an balance of strength, stiffness and toughness with excellent molding characteristics. The right balance of appropriate solution from its broad these properties is the key to designing components for maximum reliability, safety and manufacturability. range of standard products, or from DuPont™ Delrin® POM, having the most metal-like behavior of any unreinforced plastic due to its very high crystallinity, its portfolio of “Special Control” (SC) is often the first choice for designers. DuPont also offers a wide range of reinforced engineering and “Premium Control” (PC) grades, plastics for applications requiring even higher stiffness, which are differentiated by a greater strength and creep resistance (See Figure
[Show full text]
Dupont™ Zytel® Product Guide and Properties
DuPont™ Zytel® nylon resin Product guide and properties 1 2 4 3 ® Registered trademarks of E.I. du Pont de Nemours and Company The miracles of science™ is a trademark of E.I. du Pont de Nemours and Company ST801 16 Toughness-Stiffness Ratio of various ZYTEL® resins compared to ZYTEL® 101L 14 490 12 10 Toughened ZYTEL® 1) ® Toughened glass reinforced ZYTEL ® Toughness 8 Glass reinforced ZYTEL 6 408 80G33 4 450 80G25 70G43 80G14 114 70G35 70G503) 70G30 2 79G13 42 101 70G25 70G20 151 135 0 246 8 101214 Stiffness2) 1) Notched Izod impact, DAM 2) Flexural modulus, 50% RH 3) Preliminary data 5 Photographs 1 – Residual circuit breaker – glass-mineral reinforced 2 – Air intake manifold – glass reinforced 3 – Sole for cycling shoes – glass reinforced 6 4 – Flat filter housing – glass reinforced 5 – Resonator – glass reinforced 6 – Hedge-trimmer housing – glass reinforced 2 DuPont™ Zytel® nylon resin Properties of ZYTEL® HTN resins are given in the bro- chure “ZYTEL® HTN – Product guide and properties”. Introduction Mineral and mineral/glass reinforced nylons are also ZYTEL® is DuPont’s registered trademark for its com- available under the MINLON® trademark. Information prehensive range of nylon resins. Since the invention on these products is given in the brochure “MINLON® – of nylon by DuPont in the 1930s, it has become the Product guide and properties”. most widely used of all engineering polymers. Due to their excellent balance of properties, nylon components Data (produced by injection moulding, extrusion or blow All data in this brochure is taken from Campus version moulding) find extensive use in many applications 4.0 (measured according to ISO standards), except including: automotive, electrical/electronic, domestic where otherwise specified.
[Show full text]
In the United States District Court for the District Of
IN THE UNITED STATES DISTRICT COURT FOR THE DISTRICT OF DELAWARE ROBERT ZOMOLOSKY, derivatively ) on behalf of E.l. DUPONT DE ) NEMOURS AND COMPANY, ) ) Plaintiff, ) ) v. ) Civ. No. 13-94-SLR ) ELLEN KULLMAN, LOIS D. JULIBER, ) CURTIS J. CRAWFORD, RICHARD H. ) BROWN, MARILLYN A. HEWSON, ) ROBERT A. BROWN, BERTRAND P. ) COLLOMB, ALEXANDER M. CUTLER, ) WILLIAM K. REILLY, SAMUEL W. ) BODMAN, and JOHN T. DILLON. ) ) Defendants, ) ) and, ) ) E.l. DU PONT DE NEMOURS AND ) COMPANY ) ) Nominal Defendant. ) Blake A. Bennett, Esquire and Gregory F. Fischer, Esquire of Cooch and Taylor, P.A., Wilmington, Delaware. Counsel for Plaintiff. Of Counsel: Nancy Kaboolian, Esquire and Richard B. Margolies, Esquire of Abbey Spanier, LLP, and Deborah R. Gross, Esquire of Law Offices Bernard M. Gross, and Laurence D. Paskowitz, Esquire of Paskowitz Law Firm, P.C. Lewis H. Lazarus, Esquire, Joseph R. Slights, Ill, Esquire, and Thomas E. Hanson, Jr., Esquire of Morris James LLP, Wilmington, Delaware. Counsel for Defendant Ellen Kullman. Of Counsel: Evan R. Chesler, Esquire of Cravath, Swaine & Moore LLP. Kevin G. Abrams, Esquire and Steven C. Hough, Esquire of Abrams & Bayliss LLP, Wilmington, Delaware. Counsel for Defendants Lois D. Juliber, Curtis J. Crawford, Richard H. Brown, Marillyn A. Hewson, Robert A. Brown, Bertrand P. Collomb, Alexander M. Cutler, William K. Reilly, Samuel W. Bodman, and John T. Dillon. Of Counsel: David E. Kendall, Esquire, Douglas R. Marvin, Esquire, and Ana C. Reyes, Esquire of Williams & Connolly LLP for Defendants Lois D. Juliber, Curtis J. Crawford, Richard H. Brown, Marillyn A. Hewson, Robert A. Brown, Bertrand P. Collomb, and Alexander M.
[Show full text]
Dupont™ Zytel® and Minlon® Nylon Resins Molding Guide Table of Contents
DUPONT™ ZYTEL® AND MINLON® NYLON RESINS MOLDING GUIDE TABLE OF CONTENTS 1. PROCESSING GUIDELINE SUMMARY .................................1 8. MOLDING PARAMETERS ....................................................16 Drying Considerations ..........................................................1 Melt and Cylinder Temperature ...........................................16 Mold Temperatures ...............................................................1 Interruptions .......................................................................16 Shrinkage Considerations .....................................................1 Nozzle Temperature ............................................................17 Melt Temperatures................................................................1 Cavity Temperature .............................................................17 Operating Conditions ............................................................2 Injection Phase–Speed and Pressure .................................18 Dynamic Pressure Drop (DPD) ...........................................19 2. SAFE HANDLING INFORMATION .........................................2 Pack or Hold Pressure Phase..............................................19 Safety Precautions................................................................2 Hold Pressure Time (HPT) ..............................................20 Regrinding Operation ...........................................................3 Cooling Time .......................................................................20
[Show full text]
Kevlar Cut Protection Testing
DuPont™ Kevlar ® THE SCIENCE OF CUT PROTECtiON Industry standards groups have made tremendous progress in testing and measuring the cut protective performance of gloves and apparel. DuPont has been a pioneer and active contributor to these efforts. It is now commonplace to have a wide range of performance data available for any protective apparel under consideration. Although the availability of cut protection performance information is widespread, it is important to understand the different test methodologies in order to interpret the data and draw accurate conclusions. This guide is designed to help specifiers of protective apparel make informed decisions about cut protective apparel performance. As a result, specifiers should take the time to better understand the sources of information and the critical factors that influence cut protection. Recent changes to some of the test methods make this imperative. The keys to cut protection Basis weight (oz/yd2) Cut protection is a combination of many factors, not just Defined as the fabric weight per unit area, not the overall the material of construction. Therefore, all of the following glove weight. The higher the basis weight, the higher the factors should be carefully considered when assessing cut resistance because there is more material present. the cut-resistant properties of a glove, particularly if you are developing a product specification: Fabric construction Defined as the details of structure of fabric. Includes such Material of construction information as types of knit or weave, threads/stitches (Kevlar®, leather, cotton, steel, etc.) This has the per inch. This can affect yarn mobility and sample greatest impact on the cut resistance of personal thickness, which can affect cut resistance.
[Show full text]
Wallace Hume Carothers Materials on Nylon 2726
Wallace Hume Carothers materials on Nylon 2726 This finding aid was produced using ArchivesSpace on September 26, 2021. Description is written in: English. Describing Archives: A Content Standard Manuscripts and Archives PO Box 3630 Wilmington, Delaware 19807 [email protected] URL: http://www.hagley.org/library Wallace Hume Carothers materials on Nylon 2726 Table of Contents Summary Information .................................................................................................................................... 3 Biographical Note .......................................................................................................................................... 3 Scope and Contents ........................................................................................................................................ 4 Administrative Information ............................................................................................................................ 4 Related Materials ........................................................................................................................................... 5 Controlled Access Headings .......................................................................................................................... 5 - Page 2 - Wallace Hume Carothers materials on Nylon 2726 Summary Information Repository: Manuscripts and Archives Creator: Carothers, Wallace Hume, 1896-1937 Title: Wallace Hume Carothers materials on Nylon ID: 2726 Date [inclusive]: 1933-1997
[Show full text]
Stephanie Kwolek, Inventor of the Super Fibre Kevlar, Dies at 90
READING COMPREHENSION Read the following article carefully. Decide whether the statements following it are TRUE (T) or FALSE (F) according to the article. If you think the statement is false, explain why on the lines below. Stephanie Kwolek, inventor of the super fibre Kevlar, dies at 90 American chemist was working on tyre technology when she discovered the super strong fibre now used in body armour Reuters theguardian.com, Saturday 21 June 2014 Stephanie Kwolek, the American chemist who invented the super-strong fibre Kevlar used in bullet-proof vests, has died at age 90. Kwolek, who worked for the DuPont chemical company for four decades starting in 1946, died in Delaware after a short illness. The company confirmed her death. "We are all saddened at the passing of DuPont scientist Stephanie Kwolek, a creative and determined chemist and a true pioneer for women in science," DuPont chief executive Ellen Kullman said in a statement. "Her synthesis of the first liquid crystal polymer and the invention of DuPont Kevlar highlighted a distinguished career." Kwolek was working to find a fibre to strengthen radial tyres when she came across a thin, milky solution of polymers that showed real promise. She told the News Journal newspaper in Wilmington, Delaware, in 2007 that it was not exactly a "eureka moment." But it led to the development of Kevlar, now a critical part of bulletproof vests, helmets and other body armour components as well as a range of other applications like tyres, firefighter suits, boat hulls, fibre optic cables, fuel hoses, airplane and spacecraft parts and skis.
[Show full text]
Is Pollution Value-Maximizing? the Dupont Case
NBER WORKING PAPER SERIES IS POLLUTION VALUE-MAXIMIZING? THE DUPONT CASE Roy Shapira Luigi Zingales Working Paper 23866 http://www.nber.org/papers/w23866 NATIONAL BUREAU OF ECONOMIC RESEARCH 1050 Massachusetts Avenue Cambridge, MA 02138 September 2017 We thank Asher Schechter for research assistance, John Matsusaka, Cary Coglianese and Effi Benmellech for very useful comments, and participants in conferences and seminars in University of Chicago Booth School of Business, University of Chicago Law School, the American Law and Economics Association, The Society of Environmental Law and Economics Scholars, European Law and Economics Association, Israeli Law and Economics Association, IDC, Case Western University, and Columbia University. Financial support from the Stigler Center at the University of Chicago is gratefully acknowledged. The views expressed herein are those of the authors and do not necessarily reflect the views of the National Bureau of Economic Research. NBER working papers are circulated for discussion and comment purposes. They have not been peer-reviewed or been subject to the review by the NBER Board of Directors that accompanies official NBER publications. © 2017 by Roy Shapira and Luigi Zingales. All rights reserved. Short sections of text, not to exceed two paragraphs, may be quoted without explicit permission provided that full credit, including © notice, is given to the source. Is Pollution Value-Maximizing? The DuPont Case Roy Shapira and Luigi Zingales NBER Working Paper No. 23866 September 2017 JEL No. K32,L21,Q52 ABSTRACT DuPont, one of the most respectable U.S. companies, caused environmental damage that ended up costing the company around a billion dollars. By using internal company documents disclosed in trials we rule out the possibilities that this bad outcome was due to ignorance, an unexpected realization, or a problem of bad governance.
[Show full text]
Dupont™ Kevlar® the SCIENCE of CUT PROTECTION
DuPont™ Kevlar® THE SCIENCE OF CUT PROTECTION Industry standards groups have made tremendous progress in testing and measuring the cut protective performance of gloves and apparel. DuPont has been a pioneer and active contributor to these efforts. It is now commonplace to have a wide range of performance data available for any protective apparel under consideration. Although the availability of cut protection performance information is widespread, it is important to understand the different test methodologies in order to interpret the data and draw accurate conclusions. This guide is designed to provide specifiers with information of protective apparel that can help them make informed decisions about cut protective apparel performance. As a result, specifiers should take the time to better understand the sources of information and the critical factors that influence cut protection. The keys to cut protection Basis weight (oz/yd2) Cut protection is a combination of many factors, not just Defined as the fabric weight per unit area or areal density, the material of construction. Therefore, all of the following not the overall glove weight. The higher the basis weight, factors should be carefully considered when assessing the higher the cut resistance because there is more the cut-resistant properties of a glove, particularly if you material present. are developing a product specification: Fabric construction Material of construction Defined as the details of structure of fabric. Includes such (Kevlar® fiber, leather, cotton, steel, etc.) This has the information as types of knit or weave, threads/stitches per greatest impact on the cut resistance of personal inch. This can affect yarn mobility and sample thickness, protective equipment.
[Show full text]
Chemours Amended Complaint
IN THE COURT OF CHANCERY OF THE STATE OF DELAWARE THE CHEMOURS COMPANY, ) ) Plaintiff, ) ) v. ) ) DOWDUPONT INC.; ) C.A. No. 2019-0351-SG CORTEVA, INC.; AND E. I. DU ) PONT DE NEMOURS AND ) COMPANY, ) ) Defendants. ) ) ) VERIFIED FIRST AMENDED COMPLAINT Plaintiff The Chemours Company (“Chemours”), by and through its undersigned counsel, as and for its complaint against the Defendants named herein, alleges on personal knowledge as to itself and its own conduct, and on information and belief as to all other matters, as follows: INTRODUCTION 1. E. I. du Pont de Nemours and Company (“DuPont”) has manufactured industrial chemicals since 1802. In 2015, as part of a plan to off-load its historical environmental liabilities, DuPont orchestrated a spin-off of its Performance Chemicals unit into a new company named Chemours. When DuPont did so, its board made the determination — required by Delaware statutory and common law — that the spin-off was appropriate and that Chemours was solvent and viable at the time. DuPont’s board made that determination on the basis of “High End (Maximum) Realistic Exposure” numbers DuPont certified for each of the many contingent liabilities it was dumping on Chemours. The spin documents provided that Chemours would indemnify DuPont for these historical liabilities, which DuPont certified would be no larger than $1.42 billion in the aggregate. 2. It has since become clear that DuPont’s supposedly “maximum” numbers systematically and spectacularly underestimated its actual exposure. Yet DuPont and the other Defendants now claim a right to unlimited indemnification from Chemours for DuPont’s massive historical liabilities, without regard for the “maximum” numbers DuPont certified for those liabilities and upon which the spin-off was predicated.
[Show full text]
Water 2018 W0
E.I. du Pont de Nemours and Company - Water 2018 W0. Introduction W0.1 (W0.1) Give a general description of and introduction to your organization. E. I. du Pont de Nemours and Company, commonly referred to as DuPont, was founded in 1802 and was incorporated in Delaware in 1915. Today, DuPont is helping customers find solutions to capitalize on areas of growing global demand — enabling more, safer, nutritious food; creating high-performance, cost-effective and energy efficient materials for a wide range of industries; and increasingly delivering renewably sourced bio-based materials and fuels. Total worldwide employment at December 31, 2017 was about 44,000 people. The company has subsidiaries in about 90 countries worldwide and manufacturing operations in about 50 countries. Effective August 31, 2017, The Dow Chemical Company (“Dow”) and E. I. du Pont de Nemours and Company (“DuPont”) completed the previously announced merger of equals transaction contemplated by the Agreement and Plan of Merger dated as of December 11, 2015, as amended March 31, 2017 (the “merger transaction”). The merger transaction resulted in each of Dow and DuPont surviving as subsidiaries of DowDuPont Inc. (“DowDuPont”). DowDuPont is now pursuing the intended separation of the Agriculture, Materials Science and Specialty Products divisions into three independent, publicly traded companies (the “Intended Business Separations”). DowDuPont announced dates for the Intended Business Separations: Materials Science is expected to separate from DowDuPont about the end of the first quarter of 2019, and Agriculture and Specialty Products are each expected to separate from one another around June 1, 2019. DowDuPont also announced brand names for the Intended Business Separations reflecting its ongoing progress toward the separations.
[Show full text]