DOCSLIB.ORG

Specifica Tions

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Specifica Tions * PEUGEOT 3008 1.2 PureTech EAT8 SUV SPECIFICATIONS ENGINE Type Liquid-cooled, 4-stroke DOHC, turbocharged, Stop-Start System Number of cylinders / valves 3 in-line / 12 Fuel system Direct-injection, petrol Bore x Stroke 75 mm x 90.5 mm Engine capacity 1199 cc Compression ratio 10.5 :1 Maximum output 129 hp / 96 kW @ 5500 rpm Maximum torque 230 Nm @ 1750 rpm TRANSMISSION Type EAT8 (Efficient Automatic Transmission 8-speed) with Paddle Shifts Driven wheels Front FUEL VES Band B Combined CO2 emissions (Euro 6) 121 g/km Fuel consumption Combined 5.2 litres/100km Extra Urban 4.9 litres/100km Urban 6.0 litres/100km Fuel tank capacity 53 litres PERFORMANCE Maximum speed 197 km/h Acceleration (0 to 100 km/h) 10.9 seconds DIMENSIONS Overall length 4447 mm Overall width 1841 mm Overall height 1623 mm Wheelbase 2675 mm Track (front / rear) 1601 mm / 1610 mm Boot space (minimum / maximum) 520 litres / 1580 litres WEIGHT Kerb weight 1320 kg Maximum laden weight 1950 kg STEERING Power steering Electric, speed-sensitive variable power assistance SUSPENSION Front MacPherson independent suspension, coil springs and anti-roll bar Rear Deformable cross member, coil spring and integrated anti-roll bar BRAKES Front Ventilated Discs Back Solid Discs TYRES Active Allure Front and rear 215/65 R17 (Chicago Alloys) 225/55 R18 (Detroit Alloys) Information accurate as of 22 June 2020. *Please note that technical specifications and features are based on manufacturer’s data and may change without prior notice. Accessories shown may vary. 3008 1.2 PURETECH SUV STANDARD EQUIPMENT EXTERIOR DESIGN Active Allure Full LED Technology: Headlights with automatic levelling, LED fog lights with cornering function, LED • front indicators LED Daytime Running Lights • • LED Rear Lights • • LED Side Indicators • • LED Courtesy Puddle Lights • • Electric folding side mirrors • • Front Grille with Vertical Chrome Accents • Front Grille with Horizontal Chrome Accents • Silver protector on front bumper • Stainless steel sealing strips and quarter panel trim • Aluminium Roof Rails • INTERIOR DESIGN i-Cockpit with 12.3” TFT configurable Head-Up Digital Cluster • • 8” capacitive colour touchscreen with Bluetooth, USB port, radio and trip computer display • • Wireless smartphone charging (Qi1.1 standard) • • NCC: Mirror Screen system with linked voice recognition, Apple CarPlay and Android Auto • • Panoramic Sunroof with electrically-controlled blind and Blue LED light guides • Keyless entry and start system • • 3 X 12 volt power sockets • • Foldable Front Passenger seat • Front centre armrest with storage console • • Split-folding rear seats (60/40) with “Magic Flat” feature • • Rear armrest with cup-holders and ski-flap opening • • 2-Position Boot Floor • • Electric parking brake with Hill Hold Function • • Card holder • • COMFORT Leather steering wheel with flat top and flat bottom design, with display and audio controls • • Height and reach adjustable steering wheel • • Electric controls for Driver’s seat (with Memory Function) • Factory-fitted PEDIMONTE Leather Effect & Cloth seats • Dual-zone air-conditioning with rear aircon vents • • Central locking with Automatic Door Lock • • One touch front and rear power windows with anti-pinch feature • • Electric child door and window lock • • ACTIVE SAFETY Speed Limit Information, Intelligent Speed Adaptation and Driver’s Attention Warning System • • Lane Departure Warning System • • Blind Spot Monitoring System • Lane Keeping Assist • High Beam Assist • Emergency Brake Assist (EBA) • • Anti-lock Braking System (ABS) with Electronic Brake-force Distribution (EBD) • • Electronic Stability Programme (ESP) • • Automatic hazard lights during emergency braking • • Cruise Control with speed limiter • • Automatic rain and light sensors • • Automatic dimming rear view mirror • • Front windscreen wipers with “Magic Wash” cleaning system • • Triple indicator flashing • • Tyre pressure monitoring system • • Front and Rear Parking Sensors with VisioPark 180o Reverse Camera • • PASSIVE SAFETY 6 airbags (front, side and curtain) • • De-activation switch for front passenger airbag • • Front seatbelts with force-limiting pre-tensioners • • 3 ISOFIX child seat mountings for front passenger seat and rear outer seats • • Engine immobiliser keys with remote control • • Space-saver spare tyre • • Showroom: 305 Alexandra Road Singapore 159942 Tel: 6376 2288 Fax: 6477 7373 Business hours: Mon – Sat, 8am – 7pm, Sun & Public Holidays,10am – 7pm www.peugeot.com.sg facebook.com/peugeotsg Bus. Reg. No.: 52907220C.
Load more

Recommended publications
  • Late Model, Crate, Sportsman, Driver Developmental
    LATE MODEL, CRATE, SPORTSMAN, DRIVER DEVELOPMENTAL 2021 GENERAL / SHARED RULES LATE MODEL, CRATE, & SPORTSMAN TOP VIEW DIMENSIONS • Roof length must be a minimum of forty-four inches (44") to a maximum of fifty-four inches (54"). (Except Top Less Sportsman) • Roof a width must be minimum of forty-eight inches (48") to a maximum of fifty-two inches (52"). (Except Top Less Sportsman) • All roof side panels must extend to edge of decking. (Except Top Less Sportsman) • Front fender flares cannot extend beyond from tire more than one inch (1") in width with the wheels pointed might. • Door cannot exceed seventy-six inches (76”) in its entirety at top of door. • Door cannot exceed eighty - two inches (82") in width at the bottom in the center of car. • The quarter panels cannot exceed seventy-six inches (76") in width at any point behind the center of the rear hub as measured at the top. • Rear decks must taper from seventy-six inches (76"), as measured at the top over the rear hubs, uniformly back to seventy-two inches (72”) at the spoiler, equally on both sides. • Maximum spoiler width is seventy-two inches (72"). • LATE MODEL, CRATE, & SPORTSMAN SIDE VIEW DIMENSIONS • Stock Nosepiece can extend a maximum of fifty-two inches (52") from center of from hub to farthest point extending forward. • Roof height must be between forty-five (45") and forty-eight inches (48") from the ground. • Front fenders cannot exceed thirty—seven inches (37") in height measured from the ground. • The front fender flares may not be higher than fenders by more than two inches (2").
    [Show full text]
  • 2021 Dodge Durango
    SEDANS MINIVANS/CROSSOVERS SPORT UTILITY TRUCKS/COMMERCIAL LAW ENFORCEMENT 2021 DODGE DURANGO SELECT STANDARD FEATURES Air Conditioning with Tri-Zone Temperature Control Air Filtering Audio Controls — Steering wheel-mounted Automatic Headlamps Auxiliary Power Outlet — 12-volt Battery — 650-amp on all but R/T; R/T has 700-amp maintenance-free with battery-saver feature Brakes — Four-wheel disc — Antilock with Electronic Brake-Force Distribution Child Seat Anchor System — Lower child-seat anchors and upper tether anchors help ease the installation of compatible aftermarket child seats Console — Full-length floor and overhead with two lamps, sunglasses storage and available Universal Garage Door Opener controls Electronic Stability Control(3) — With Electronic Roll Mitigation, All-Speed Traction Control, Brake Assist and four-wheel disc antilock brake system Enhanced Accident Response System 2020MY image shown. Floor Mats — Luxury, front and rear Fog Lamps Front and Rear Interior LED Lamps Glass — Deep-tint sunscreen on rear doors, quarter-panel and liftgate Hill Start Assist Locks — Power SAFETY & SECURITY Adaptive Cruise Control with Stop(12) — Available Air Bags(2) — Advanced multistage driver and front-passenger, advanced side-curtain and supplemental front-seat side — Standard Blind Spot Monitoring(21) with Rear Cross-Path Detection(22) — Available Full-Speed Forward Collision Warning Plus(11) — Available Lane Departure Warning Plus(19) — Available Trailer Sway Control(3) — Standard ENGINES HORSEPOWER(17) TORQUE(17) 3.6L Pentastar® V6 295 hp @ 6,400 rpm 260 lb-ft @ 4,000 rpm 5.7L HEMI® V8 360 hp @ 5,150 rpm 390 lb-ft @ 4,250 rpm 2020MY image shown. 2020MY image shown.
    [Show full text]
  • Crown Vic Rear Quarter Panel Modification
    Crown Vic Rear Quarter Panel Modification Unterrifying and voluminous Miguel quipped her propagator traversals immunise and alkalinising exuberantly. Foresighted Worthy evanesced very extendedly while Saxe remains mother-naked and decoctive. Booted and voguish Godfree calendar: which Monroe is unburnished enough? Your crown vic rear quarter panel performance car is not He is speaking about the Panther platforms, except with the express prior written permission of Engaged Media. Battery went bad within a few months Which lead me to find out you should always keep the throttle body clean. However, I believe what I meant to write was: at what point do you stop trying to get the kinks out of what is essentially an anchronism? ALL OTHER WARRANTIES IMPLIED BY LAW APPLICABLE TO THE BATTERY SHALL BE LIMITED TO THE WARRANTY PERIOD STATED ON THIS RECEIPT. ID, at the crown rear information about this page to find the most of requests from deer and more. All steering boxes must be constructed of magnetic cast steel. Ford had no problems out of the cars suspension wise. The quarter panel is the mercury chrome or auctioned to strengthen the crown vic rear quarter panel modification but it as a wire must be attached to the document is the. Guide is available at fleet. No other appreciable changes have been noted yet. Since quarter glass is made from the same tempered safety glass as side windows and the rear windshield, standard. Brackets and mounts must not be used or installed as air directional devices. Some photographs may be illustrative only. Which account would you like to use? Home; About us; Blog; Contact.
    [Show full text]
  • Estimating with Purpose House Keeping Welcome Anti-Trust We Are Here First and Foremost To
    METROPOLITAN CAR-O-LINER ESTIMATING WITH PURPOSE HOUSE KEEPING WELCOME ANTI-TRUST WE ARE HERE FIRST AND FOREMOST TO MAKE THE COLLISION REPAIR BUSINESS BETTER! Therefore, even if we were allowed to, we will not talk about: ▸ Labor Rates ▸ Parts or Equipment Prices ▸ Repair Times ▸ Cost and Profit & Profit Margins ▸ Dividing up the Market ▸ Boycotts or Refusals to Deal with Anyone ▸ Judgment on a Specific Shop’s Work ▸ Judgment Practices of a Specific Insurance Company ▸ Policies and Guidelines for Claim Settlements ▸ How Repairers or Insurers Conduct their Business QUESTION: WHAT’S THE ONE THING THAT BRINGS MONEY IN? PURPOSE “EFFORTS AND COURAGE ARE NOT ENOUGH WITHOUT PURPOSE AND DIRECTION” John F. Kennedy ESTIMATING WITH PURPOSE WEBSTER DEFINITION? ▸Action in the course of execution ▸Intention ▸Determination PURPOSE OF THE ESTIMATE? INSURER “Intention” ▸ A “tool” for determining loss payment ▸ Documentation of vehicle condition and damage for rating and future loss adjustment ▸ “Tool” for determining group premium ▸ “Evidence” of business practices PURPOSE OF THE ESTIMATE? REPAIRER “Intention” “Determination” ▸ Detailed Repair Plan ▸ Accurate Repairs ▸ Decrease Liability With Documentation ▸ Decrease Cycle Time ▸ Drive Profit STOP RE-KEYING! = = Capital Expenditures Capital expenditures are the amounts that companies use to purchase major physical goods or services that will be used for more than one year. Operating Expenses Operating expenses are the costs for a company to run its business operations on a daily basis. = O Operational
    [Show full text]
  • Database Reference Manual
    Database Reference Manual ©2020 Audatex North America, Inc. AE375DBRM- 0820 Database Reference Manual Database Reference Manual Table of Contents Section 1-1 Acknowledgements .................................................................................................................... 9 Acknowledgements ................................................................................................................................... 9 Section 2-1 How to Read the Audatex Estimate ......................................................................................... 11 Reports Explained ................................................................................................................................... 11 How to Read the Audatex Estimate ........................................................................................................ 11 Section 2-3 The Audatex Labor Report ...................................................................................................... 22 Section 2-4 The Supplement Reconciliation Report ................................................................................... 26 Section 2-5 The Parts Exchange New (PXN) Report ................................................................................. 28 Section 2-6 The Parts Exchange Salvage (PXS) Report ............................................................................ 31 Section 3-1 Parts in the Audatex System ..................................................................................................
    [Show full text]
  • Tools You Will Need
    Tools you will need: 1. 2 Jacks. A typical 2.5 ton floor jack and the vehicle’s included scissor jack may be used. 2. Ratchets as well as a possible Ratchet Driver, mini-ratchet, extensions, an 18MM Socket, a 10MM deep socket and mini-socket, a 7MM socket, a ½ inch deep socket and an 8MM socket. (The last 2 are optional for inflator port installation). A torque wrench or breaker bar may also be needed. 3. A 10MM and a ½ inch wrench. 4. A T40 and a T20 Torx bit and/or driver. 5. A flathead screw driver. 6. 3 pairs of pliers. 2 standard and a needle nose recommended. Channel locks and vice grips also recommended. 7. Wire strippers that can strip inline wires. 8. Snips for cutting through plastic as well as scissors that can cut through rubber. 9. A tire iron or lug-nut tool. 10. Possible utility knife. 11. Tape Measure 12. Soldering iron and solder. 13. At least 25 - 30ft. of at least 3-4 wire cable. 14. 2 rolls of electrical Tape. Optional for Inflator port installation: A drill with a 3/16 bit and a 5/16 bit. Optional for rear power outlet installation: A drill with a 7/8 to 1 inch paddle bit. Onto the parts you will need. I will list everything to get from a junk-yard first, and, since there are several choices is air-shocks (depending on brand and model) I will list those second and any additional parts needed. From a junk-yard: 1. The compressor: The compressor is located under the rear, driver’s side of the donor vehicle, and, can be typically pulled from most GM Mini-vans of either up level or luxury level trims, as well as the upper level trims of the previous GM crossovers before Theta such as the Pontiac Aztek and Buick Rendezvous.
    [Show full text]
  • Michigan Dirt Late Model Rules 2018 Season Updated November 2017
    Michigan Dirt Late Model Rules 2018 Season Updated November 2017 The following rules have been approved for racing at the following Michigan Dirt tracks: Crystal Motor Speedway, I-96 Speedway, Mid-Michigan Raceway Park, Thunderbird Raceway and Tri-City Motor Speedway. The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These rules shall govern the condition of all events, and by participating in these events, all participants are deemed to have complied with these rules. NO EXPRESSED OR IMPLIED WARRANTY OF SAFETY SHALL RESULT FROM PUBLICATIONS OF OR COMPLIANCE WITH THESE RULES AND/OR REGULATIONS. They are intended as a guide for the conduct of the sport and are in no way a guarantee against injury or death to a participant, spectator or official. The race director shall be empowered to permit reasonable and appropriate deviation from any of the specifications herein or impose any further restrictions that in his opinion do not alter the minimum acceptable requirements. NO EXPRESSED OR IMPLIED WARRANTY OF SAFETY SHALL RESULT FROM SUCH ALTERATION OF SPECIFICATIONS. Any interpretation or deviation of these rules is left to the discretion of the officials. Their decision is final. RACECEIVERS MANDATORY: TRANSPONDERS MANDATORY: IT IS THE DRIVERS RESPONSIBILITY TO HAVE THEM IN WORKING ORDER TO RACE AT THUNDERBIRD RACEWAY. 1. ENGINE Only conventional type V-8 engines with the cam in the block will be permitted. There will be no limit on the cubic inch displacement. All engines must be based on a manufactured, factory design.
    [Show full text]
  • Alpine Auto Direct Denver
    Year: 2011 Engine: 8 Cylinder Engine Make: GMC Transmission: TRANSMISSION, 6-SPEED AUTOMATIC, ELECTRONICALLY CONTROLLED with o… Model: Yukon 4WD 4dr 1500 SLT Exterior: Pure Silver Metallic (GGZ) VIN: 1GKS2CE06BR295573 Interior: Light Titanium · Console, floor with storage area, cup holders and PACKAGE integrated second row audio and HVAC controls CITY MPG HIGHWAY MPG · Cup holders, in front seating area · Suspension Package, Premium Smooth Ride · Cup holders, in rear of floor console · Cup holders, driver and passenger-side in third MECHANICAL row side trim 15 21 · Floor mats, color-keyed carpeted first and second · Rear axle, 3.08 ratio row, removable Actual mileage will vary with options, driving conditions, driving habits and vehicle's condition · Differential, heavy-duty locking rear · Floor covering, color-keyed carpeting · Transfer case, active, single-speed, electronic · Steering column, Tilt-Wheel, adjustable with Autotrac with rotary controls, does not include brake/transmission shift interlock neutral. Cannot be dinghy towed. · Steering wheel, leather-wrapped · Alternator, 160 amps · Steering wheel controls, mounted audio controls New · 4-wheel drive cruise controls and OnStar Hands-Free calling · Trailering equipment, heavy-duty includes · Tow/haul mode selector, button located at end of trailering hitch platform, 7-wire harness with shift lever MSRP $47,315.00 independent fused trailering circuits mated to a · Driver Information Center, full-functionality 7-way sealed connector and 2" trailering included INSTALLED OPTIONS
    [Show full text]
  • Structural Integrity Process Guideline Information
    March 11, 2013 Structural Integrity Process Guideline Information Appendix A - Definitions “Altered” means a vehicle that has been developed differently or has been made different from OEM; “Body Structural Integrity” means critical components designed as stress and weight/load bearing member/elements of a vehicle such as radiator support, inner fender skirts, floor pan, rocker panels, engine compartment side rails, upper reinforcements, lower body rails in the rear, inner fender wells, luggage compartment floors and the unibody are within 3 mm (less than 1/8 in.) of the critical manufacturing dimensions, alignments and tolerances. All fits and alignments are determined by the accuracy of the welded structural panels; “ICAR” means the Inter-Industry Conference on Auto Collision Repair. Online standards are located at http://www.i-car.ca/ ; “Irreparable” means a motor vehicle that, (a) as a result of being written off by an insurer, has its title transferred to the insurer, who in turn transfers the title to a person under an agreement that states that the person may use or resell it only for parts or scrap, or (b) has its title transferred to a person who is in the business of wrecking used motor vehicles and who intends to use the motor vehicle for parts or scrap; “Modified” means a vehicle that has had partial component or body changes from OEM; “Rebuilt” means a total loss vehicle that has been declared a salvage vehicle and subsequently reconstructed as referred to in Division 25 Part 3 of the Motor Vehicle Act Regulations; “Salvage” means a motor vehicle that is not an irreparable vehicle and that (a) while unsafe to drive has its title transferred, or (b) has been written off by an insurer, whether or not its title has been transferred to the insurer; “Structural Integrity Parts” means the components that are designed as stress and load bearing members.
    [Show full text]
  • 2018 Owosso Speedway Pro Late Model Rules
    2018 Owosso Speedway Pro Late Model Rules All Pro Late Model drivers are required to use a Head & Neck Restraint! This system will be mandatory for any Pro Late Model entering the track, including Test & Tune! BATTERY - One battery only. Must not be located in driver’s compartment. Must be securely mounted to structural member. Battery disconnect switch behind driver seat, mandatory. BODY SPECIFICATIONS: Owosso Speedway reserves the right to amend these rules at any time Page 1 of 8 2018 Owosso Speedway Pro Late Model Rules A. Nose clearance to floor – 3 inch min. B. Center of front wheel to front of nose – 45 inch max. C. Wheel base – 102 inch min. D. Height of body highest point of roof to floor – 45 inch min. E. Center of back wheel to rear of body – 46 inch max. F. Fuel Cell height – 8 inch min. G. Height of rear of body – 37 inch max. H. Spoiler must have tubular supports. I. Rear body clearance to floor – 6 inch min. J. Width of window – 20 inch min. K. Bumper distance from body – 3 inch. L. Height of window – 12 inch min. M. Width of car – 80 inch min. N. Front fender – 4 inch. O. Roof (front to back) – 38 inch min. P. Roof (side to side) – 45 inch min. Q. Rear fender – 9 inch max. R. R – 52 inch. S. Rear Deck – 28 inch max. (Rear window to Spoiler base) T. Horizontal extension of spoiler from body – 8 inch max U. Width of rear bumper – 72 inch max. V. Width of car – 80 inch max.
    [Show full text]
  • 2016 Azera Adds New Convenience Driving Technologies to Generous Premium Amenities
    Hyundai Motor America 10550 Talbert Ave, Fountain Valley, CA 92708 MEDIA WEBSITE: HyundaiNews.com CORPORATE WEBSITE: HyundaiUSA.com FOR IMMEDIATE RELEASE 2016 AZERA ADDS NEW CONVENIENCE DRIVING TECHNOLOGIES TO GENEROUS PREMIUM AMENITIES Derek Joyce Robin Warner Product Public Relations Manager Manager of Midwest Product Public Relations (714) 594­1728 (734) 337­2552 [email protected] [email protected] ID: 44127 Smart Cruise Control with Stop/Start Capability and Electronic Parking Brake Added to Abundant Level of Advanced Convenience and Safety Features FOUNTAIN VALLEY, Calif., October 19, 2015 – For 2016, Hyundai has again increased the appeal of its award­winning Azera premium sedan, offering new convenience driving technologies such as Smart Cruise Control with Stop/Start capability and Electronic Parking Brake to Limited models. 2016 Azera Highlights Driving Convenience Smart Cruise Control with Stop/Start capability added to Limited model Electronic Parking Brake added to Limited model The 2016 Azera represents an advanced approach to the traditional premium sedan segment by delivering a powerful yet efficient powertrain, modern design, and luxury features combined with Hyundai’s consistently strong value proposition. Azera continues to offer customers the highest levels of luxury, performance, and efficiency, all brought together in an innovative design. 2016 Hyundai Azera MSRP Azera 3.3L V6 $34,100 Azera Limited 3.3L V6 $39,300 AZERA MEETS THE MECHANICS OF FLIGHT Azera’s Fluidic Sculpture design takes inspiration from the mechanics of flight. The exterior of the Azera is long, light and low. The unique, undulating beltline allows for a long, sleek roofline accented by the third window and wraparound LED taillights.
    [Show full text]
  • Glass Breakage Report
    CASCADE GLASS BREAKAGE REPORT NATIONWIDE: 1-800-320-5358 AUTO GLASS www.cascadeautoglass.com ❏ Replacement ❏ C/S ❏ Labor Only ❏ Delivery Only ❏ Repair(s) # Job Date CUSTOMER INFORMATION PO # VIN Name Ins. Co. Policy # Claim # Loss Date Ded. Amt. Year Make Model Body Style FLEET INFORMATION PO # Mileage Unit/Veh. # RO # Lic. Plate # Fleet Charge $ PRE-WORK INSPECTION 1) Front Bumper 2) Hood 3) Right Fender Description of Damage: 4) Left Fender 5) Left Front Door 6) Right Front Door 7) Left Rear Door 8) Right Rear Door 9) Left Quarter Panel 10) Right Quarter Panel 11) Windshield 12) Roof 13) Back Window 14) Trunk Lid 15) Rear Bumper Customer Initial: PARTS USED Urethane Type: ❏ Quick-Cure ❏ Other ❏ Lot #: # of Tubes: Activator: Temperature: Glass Part(s) #: Moulding/Clip Part(s) #: Other: ASSIGNMENT OF PROCEEDS AND AUTHORIZATION TO PAY: Replacement or repair of the glass in my automobile has been done to my satisfaction. I have insisted that, where possible, Cascade Auto Glass use parts and materials from original equipment manufacturers in the replacement of my automobile glass. I authorize my insurance company to r elease policy, coverage and other information to Cascade Auto Glass. I hereby authorize and direct my insurance company to pay this invoice directly to Cascade Auto Glass, Inc. and I assign any and all claims in connection with this automobile glass installation or repair against my insurance company and all policy proceeds due for this installation or repair to Cascade Auto Glass. I agree that if my insurer should ignore this directive to pay and the assignment of the policy proceeds and issue payment to me that I will immediately forward payment to Cascade Auto Glass by either endorsing the check that I receive over to Cascade Auto Glass or paying Cascade Auto Glass an amount equal to what I receive.
    [Show full text]