DOCSLIB.ORG

Some Edge Tool Manufacturers of Sheffield 1787 to 1911

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Some Edge Tool Manufacturers of Sheffield 1787 to 1911 Some Edge Tool Manufacturers of Sheffield 1787 to 1911 The purpose of this list is to aid identification of the maker’s stamps found on billhooks and other edge tools, and to give a guide to their age. The list has been compiled courtesy of the SHEFFIELD INDEX – Trade Directories: http://www.sheffieldindexers.com/DirectoriesIndex.html The compilers of the Sheffield Index used the following trade directories: 1787 Gales & Martin Directory of Sheffield 1791 Universal British Directory 1825 Gell's Directory of Sheffield 1828 Pigot's Commercial Directory (1828 -18290 1833 White's History & Directory of Sheffield 1837 White's Directory of Sheffield & Rotherham 1841 Henry & Thos. Rodgers Sheffield & Rotherham Directory 1846 Slater's Directory of Sheffield 1852 White's Gazetteer & General Directory of Sheffield 1862 Drake's Directory of Rotherham & District 1871 White's Directory of Sheffield & District 1905 White's Directory of Sheffield & Rotherham 1911 White's Directory of Sheffield & Rotherham There may be some errors of transcription, both in the original and the subsequent copying to this list.…. Wherever they are obvious they have been corrected….. Note: an ‘Occupation’ search for edge in the Sheffield Index found 0 results. This list is the results of a search for edge* (see below) - it found 281 entries and for *edge* , which found 542 entries. To it is added a list for *sickle* (62 entries). The lists include merchants, makers, manufacturers, forgers and grinders etc. Not all would have made billhooks, and the list is by no means complete blade pruning hooks, tea knives etc. Allsebrook, James (Edge Tool Manufacturer). Residing at 38 Trafalgar Street, in 1871. Recorded in: Whites Shefffield & District Directory - 1871. Ash, William & Co ( (late Roberts and Ash) manufacturers of all kinds of edge tools, brace and bits, skates, saws, plantation tools &c.). Residing at Norfolk Lane , Sheffield in 1825. Recorded in: Gells 1825 Directory of Sheffield. Ash, William & Co. (Joiners' and edge tool & skate mfrs.). Residing at Norfolk Lane, house - Spring hill cottage, in 1837. Recorded in: Whites Directory of Sheffield & Rotherham - 1837. Ash, William & Henry (Edge tool maker(s)). Residing at 14 Norfolk Lane, Sheffield in 1846. Recorded in: Slaters 1846 Directory, Sheffield. Ash, Wm. (Joiners & edge tool & skate mfrs.). Residing at Norfolk Ln., in 1833. Recorded in: Whites History & Directory of Sheffield - 1833. Ash Wm. & Co. (Merchants And Manufacturers Of Edge Tools). Residing at 14 Norfolk Lane, in 1841. Recorded in: Henry & Thos. Rodgers Sheff & Roth Directory - 1841. Ash, Wm (Edge Tool Manufacturer). Residing at House Western Bank Lane, in 1841. Recorded in: Henry & Thos. Rodgers Sheff & Roth Directory - 1841. Ash, William Henry (Merchant & edge tool manufacturer). Residing at 14 Norfolk Lane; h. Broom Park, in 1852. Recorded in: White's Gazetteer & General Directory of Sheffield - 1852. Ashforth, Joseph (, (& Co.) spindle, file,saw and edgetool, screw, bolt, loom-spring, card engi). Residing at Bruce Works, 72 Bridge Street; h. Rock Street, in 1852. Recorded in: White's Gazetteer & General Directory of Sheffield - 1852. Atkin, George (Edge Tool Makers). Residing at 6 Queen Street, in 1828-9. Recorded in: Pigot's Commercial Directory - 1828 to 1829. Barnes, William (Edge Tool Manufacture). Residing at Pacific Works 182 Bernard Street h.173 South Street, Park, in 1905. Recorded in: Whites directory of Sheffield & Rotherham. Barnes, William (Edge Tool Manufacturer (Pacific Works)). Residing at 180 & 182 Bernard Street, Park, in 1911. Recorded in: Whites Directory of Sheffield & Rotherham - 1911. Barnsley, George & Sons (Merchants & manufacturers of steel files, saws, edge tools, hammers, butchers knives, chaff knives, machine knives, butchers & table steels, shoe knives, awl blades, curriers & tanners' tools & scythes). Residing at Cornish works, Cornish street, in 1905. Recorded in: Whites Directory of Sheffield & Rotherham. Barnsley, George & Sons (Edge Tool Manufacturers). Residing at Cornish Works, Cornish Street, in 1911. Recorded in: Whites Directory of Sheffield & Rotherham - 1911. Battie John & Son (Edge Tool Manufacturers). Residing at 67 Bernard Street (Park), in 1871. Recorded in: Whites Shefffield & District Directory - 1871. Beardshaw, Jonathan & Son (Edge tool maker(s)). Residing at 16 Garden Street, Sheffield in 1846. Recorded in: Slaters 1846 Directory, Sheffield. Beardshaw, Jonathan & Son (Merchants and saw, file, edge tool and steel manufacturers). Residing at 16 Garden Street, in 1852. Recorded in: White's Gazetteer & General Directory of Sheffield - 1852. Bedford, John (, Merchant, steel refiner and saw, edge tool, cutlery &c. manufacturer and ti). Residing at Regent Works, 207 Portobello Street and Oughtibridge; h. Wadsley, in 1852. Recorded in: White's Gazetteer & General Directory of Sheffield - 1852. Bedford, John & Sons Ltd (, manufacturers of steel tiles, saws, edge tools etc). Residing at Lion works, Mownbray street, Sheffield in 1905. Recorded in: Whites Directory of Sheffield and Rotherham. Beet, Jonathan & Sons (Edge tool maker(s)). Residing at 188 Broad Lane, Sheffield in 1846. Recorded in: Slaters 1846 Directory, Sheffield. Beet, Jonathan & Sons & Griffith (Merchants and steel, file, saw, edge tool and cutlery man). Residing at Agenoria Works, Saville Street, East, in 1852. Recorded in: White's Gazetteer & General Directory of Sheffield - 1852. Belk, George (Edge tool manufacturer and general dealer). Residing at 4 Whieldon (sic) Street, Sheffield in 1825. Recorded in: Gells 1825 Directory of Sheffield. Bennet, George (Smith and edge tool manufacturer). Residing at Chapeltown, in 1825. Recorded in: Gells 1825 Directory of Sheffield. Biggin, Sl. (Edge tool manfr.). Residing at Green Lane, Dronfield, in 1871. Recorded in: Whites Sheffield & District Directory - 1871. Bingham & Watts, (Edge tool manufacturers). Residing at Norton Woodseats, in 1825. Recorded in: Gells 1825 Directory of Sheffield. Binney, Brothers & Co. (Merchants, steel converters, file, saw & edge tool mfrs.). Residing at Hartshead & Heeley Tilt, in 1833. Recorded in: Whites History & Directory of Sheffield - 1833. Binney Brothers & Co, (Merchants, steel converters and file, saw and edge tool mfrs.). Residing at Hartshead and tilters, Heeley, in 1837. Recorded in: Whites Directory of Sheffield & Rotherham - 1837. Bishop, Elizabeth & Son [James](Edge tool manufacturers). Residing at 162 Young Street, in 1852. Recorded in: White's Gazetteer & General Directory of Sheffield - 1852. Bishop, George & Sons (Edge tool maker). Residing at Brinsworths Orchard, in 1787. Recorded in: Gales & Martin Directory of Sheffield - 1787. Bishop, James & Sons (Edge tool mfrs.). Residing at 142 Young Street, in 1905. Recorded in: Whites Directory Sheffield & Rotherham. Bishop, Matthew (Edge Tool Makers). Residing at 16 Sim's Croft, in 1828-9. Recorded in: Pigot's Commercial Directory - 1828 to 1829. Bishop, Peter (Edge tool and saw maker). Residing at , in 1791. Recorded in: Universal British Directory - 1791. Bishop, Samuel (Edge Tool Makers). Residing at Carver Street, in 1828-9. Recorded in: Pigot's Commercial Directory - 1828 to 1829. Bishop, Samuel (Edge tool manufacturer). Residing at 10 Young Street, in 1833. Recorded in: Whites History & Directory of Sheffield - 1833. Bishop, Samuel (Edge tool mfr,). Residing at 10 Young Street, in 1837. Recorded in: Whites Directory of Sheffield & Rotherham - 1837. Bishop, Weldon & Co., (Factors & manufacturers of steel saws & edge tools). Residing at , in 1791. Recorded in: Universal British Directory - 1791. Booth, William (Edge tool manfr.). Residing at Dronfield, in 1871. Recorded in: Whites Sheffield & District Directory - 1871. Booth & Deakin, (Scythes, sickles hay and straw knives, reap hooks and edge tool manufacturer). Residing at Norton Hammer on the River Sheaf, in 1825. Recorded in: Gells 1825 Directory of Sheffield. Boun, Jas. (Beer House & Edge Tool Forger). Residing at 150 Eldon St, in 1841. Recorded in: Henry & Thos. Rodgers Sheff & Roth Directory - 1841. Bradbury and Taylor, (Edge tools and gimblet manufacturers). Residing at Furnival Street, Sheffield in 1825. Recorded in: Gells 1825 Directory of Sheffield. Briddon, Jas (Edge Tool Maker). Residing at 52 Jessop St, in 1841. Recorded in: Henry & Thos. Rodgers Sheff & Roth Directory - 1841. Brightmore, Mitchell, William Brightmore & Co (Merchants & saw, edge tool, joiners tool hammer scythe & steel mfrs). Residing at Suffolk Works, Suffolk Rd; h Gell St, in 1837. Recorded in: Whites Directory of Sheffield & Rotherham - 1837. Brittain, Samuel, Swann & Co.( Saw, edge tool, file &c. manufacturers and steel converters) Residing at St George's Works, 11 Shoreham Street; h. 84 Spring Lane, in 1852. Recorded in: White's Gazetteer & General Directory of Sheffield - 1852. Brookes, William & Son (Edge tool maker(s)). Residing at 29 Rockingham Street, Sheffield in 1846. Recorded in: Slaters 1846 Directory, Sheffield. Brookes & Son, William (Edge Tool Manifacturers). Residing at Howard Works, Lovelot Road., Attercliffe, Carbrook, etc. in 1871. Recorded in: Whites Sheffield & District Directory - 1871. Brookes Wm & Son, (Mfrs. of Tbl. Cutly. Rzrs. Scissors, Saws, Files, Edge Tools, Snuffers, Nut Cracks, Cork Screws & Hoticultural & Botanical Tool Chests). Residing at 31 Rockingham St, in 1841. Recorded in: Henry & Thos. Rodgers Sheff & Roth Directory - 1841. Brown John & Co, (Merchants & Mfr of Spring & Table Knives, Razors, Saws, Files, Edge Tools & Co).
Load more

Recommended publications
  • 26 9695 636155111578820000.Pdf
    FREEHOLD INVESTMENT OPPORUNITY WITH DEVELOPMENT POTENTIAL (SUBJECT TO PLANNING) Stannington Road, Malin Bridge Sheffield, S6 5FL Stannington Road, Malin Bridge, Sheffield S6 5FL Executive Summary Location Situation / Description / Accommodation Further Information Executive Summary Location Situation / Description / Accommodation Further Information Stannington Road, Malin Bridge, Sheffield S6 5FL Executive Summary An opportunity to acquire an incoming producing 11.5 acre site located in a housing policy area in an established Sheffield suburb. • Commercial investment with development potential • Current income of £57,030 PA derived from 4 occupiers • Previous outline planning consent for 127 residential units • Proposed retail scheme over part Executive Summary Location Situation / Description / Accommodation Further Information Stannington Road, Malin Bridge, Sheffield S6 5FL Location The property is located approximately 4 miles to the north west of Sheffield City The Property Centre in the predominantly residential suburb of Malin Bridge. Malin Bridge is centred on the road bridge over the River Loxley, flanking the property’s northern boundary, and is surrounded by the suburbs of Hillsborough, Wisewood, Walkley and Stannington. Malin Bridge serves as the terminus for Sheffield Supertram’s blue line service, which runs eastwards into the city centre and then onto Halfway. The Property Executive Summary Location Situation / Description / Accommodation Further Information Stannington Road, Malin Bridge, Sheffield S6 5FL Situation The property is situated on the south western side of the aforementioned road bridge, close to the centre of Malin Bridge. The principal access to the property is from Stannington Road. Description Description The property comprises an expanse of terraced land and buildings, currently serving as a commercial property investment incorporating an occupied sports club with playing fields, a used car lot, a salvage yard and a small number of self-contained workshops.
    [Show full text]
  • Landscape Tools
    Know your Landscape Tools Long handled Round Point Shovel A very versatile gardening tool, blade is slightly cured for scooping round end has a point for digging. D Handled Round Point Shovel A versatile gardening tool, blade is slightly cured for scooping round end has a point for digging. Short D handle makes this an excellent choice where digging leverage is needed. Good for confined spaces. Square Shovel Used for scraping stubborn material off driveways and other hard surfaces. Good for moving small gravel, sand, and loose topsoil. Not a digging tool. Hard Rake Garden Rake This bow rake is a multi-purpose tool Good for loosening or breaking up compacted soil, spreading mulch or other material evenly and leveling areas before planting. It can also be used to collect hay, grass or other garden debris. Leaf rake Tines can be metal or plastic. It's ideal for fall leaf removal, thatching and removing lawn clippings or other garden debris. Tines have a spring to them, each moves individually. Scoop Shovel Grain Shovel Has a wide aluminum or plastic blade that is attached to a short hardwood handle with "D" top. This shovel has been designed to offer a lighter tool that does not damage the grain. Is a giant dust pan for landscapers. Edging spade Used in digging and removing earth. It is suited for garden trench work and transplanting shrubs. Generally a 28-inch ash handle with D-grip and open-back blade allows the user to dig effectively. Tends to be heavy but great for bed edging.
    [Show full text]
  • Tools & Handles T2
    LIMITED TOOLS & HANDLES T2 HERRON SHOVELS • WORKMAN • HERRON GRAIN • HERRON SPADES HERRON SHOVELS “HERRON GRAIN” “HERRON WORKMAN” Code Size Box Qty “HERRON GRAIN” 28” ASH D. MC324 Each or 5 HANDLE ALUMINIUM SHOVEL Code Size Box Qty 48” ASH LONG HANDLE POINTED MC320 Each or 6 T HANDLED SHOVEL “HERRON GRAIN” “HERRON WORKMAN” Code Size Box Qty “HERRON GRAIN” 48” ASH T. MC325 Each or 5 HANDLE ALUMINIUM SHOVEL Code Size Box Qty “HERRON GRAIN” “HERRON WORKMAN” 54” ASH MC323 Each or 6 LONG HANDLE POINTED SHOVEL MANURE FORK Code Size Box Qty “HERRON GRAIN” 48” ASH LONG MC321 Each or 5 HANDLE ALUMINIUM SHOVEL HERRON SPADES Code Size Box Qty LONG HANDLE SPADE “HERRON” LONG HANDLE MC328 Each or 6 MANURE FORK “HERRON LOADER” Code Size Box Qty MC326 42” 12” X 6” X 5” Each or 6 T HANDLED SPADE Code Size Box Qty 30” T. HANDLE SQUARE MOUTH Code Size Box Qty MC322 Each or 6 SHOVEL MC327 36” 12” X 6” X 5” Each or 6 www.herron.ie [email protected] 117 T2 TOOLS & HANDLES True Temper PRODUCTS TRUE TEMPER PRODUCTS Double FAced Sledge Hammer Forged Steel Axes 2.25LB 4LB Code Size Box Qty A130 NO. 78599 2.25LB 4 Forged Steel Axes 3.5LB Code Size Carton Qty A136 No78603 4 LB 4 A131 No 78604 6 LB 4 A132 No 78605 8 LB 4 A137 No 78606 10 LB 2 A138 No 78607 12 LB 2 Code Size Box Qty A143 No 78608 16 LB 2 A133 NO. 78600 3.5 LB 4 Club / Lump Hammer Forged Steel Splitting AxE Code Size Carton Qty A139 NO.
    [Show full text]
  • Design of Human-Powered Hybrid Electric-Power
    21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED17 21-25 AUGUST 2017, THE UNIVERSITY OF BRITISH COLUMBIA, VANCOUVER, CANADA DESIGN OF HUMAN-POWERED HYBRID ELECTRIC-POWER SHOVEL FOR DEEP EXCAVATION Matsuura, Naoki; Hatano, Yuji; Iizuka, Teppei; Fujisawa, Tatsuro; Wesugi, Shigeru Waseda University, Japan Abstract There are still a lot of high-load physical works which can’t be substituted by machine, such as clearing snow, removing sediment under floor and volcanic ashes, where a large-sized machine cannot be used or where human resources and electric power were short on occasions of emergency. Therefore, authors address to design a device for those situation. Authors focus on unique approach of “human-powered hybrid” method combining merits of human-power and machine-power. In this paper, we made this approach clear as a design method, which suggest 3 policies: choose a heavy equipment suitable to targeted work, apply human-power to each work process, and consider usability. And we apply these policies to new device for removing earth-and-sand under floor as a specific situation. Then we designed and constructed it that can excavate while switching human-power or machine-power. Users can operate it semi-automatically without pre-training, and can operate it in safety not to fall over by incorporating mechanical and electrical structures. Finally, we conducted performance experiments and confirmed that the device could work efficiently not only with human-power but also with machine-power. Keywords: Design engineering, Design methods, Design process, Mechatronics, User centred design Contact: Yuji Hatano Waseda University Wesugi Labo Japan [email protected] Please cite this paper as: Surnames, Initials: Title of paper.
    [Show full text]
  • Gardex E Catalogue
    index hammers 003 picks & mattocks 057 axes 015 hoes 067 wedges 021 forks 083 mauls 023 wrecking / pry bars 029 forged spades & shovels 087 chisels 035 rakes 093 mason pegs 041 tampers & scrapers 097 bolsters 043 bars 047 slashers 103 Hammers PRODUCT NAME DE CODE CODE CO HANDLES AMERICAN HARDWOOD (AHW) AVAILABLE WEIGHTS AW F 2GF 3GF 4GF AVAILABLE HANDLES ( ) CLUB HAMMER FIBERGLASS (F) 60411085 2G FIBERGLASS (2GF) 3G FIBERGLASS (3GF) 2.5, 4 LBS 4G FIBERGLASS (4GF) AHW F 2GF 3GF 4GF 3 Hammers BRASS NON SPARKING HAMMER MACHINIST HAMMER 60411126 60413000 6, 8, 10, 12 LBS AHW F 2GF 3GF 4GF CLUB HAMMER CONICAL EYE 60411096 3, 4, 5 KG AHW F 2GF 3GF 4GF CROSS PEIN HAMMER 60411070 3, 4, 5 KG 2, 3, 4 LBS AHW F 2GF 3GF 4GF AHW F 2GF 3GF 4GF 5 Hammers SLEDGE HAMMER STONNING HAMMER (ESP) 60411147 60411015 700, 1000, 1400 GMS AHW F 2GF 3GF 4GF ENGINEERING HAMMER 60411000 6, 7, 8, 10, 12, 14, 16, 20 LBS AHW F 2GF 3GF 4GF DRILLING HAMMER 60411058 2, 3, 4 LBS 1, 2, 3, 4 LBS AHW F 2GF 3GF 4GF AHW F 2GF 3GF 4GF 7 Hammers CLAW HAMMER AMERICAN TYPE TUBULAR CLAW HAMMER 60412041 60412056 16, 20, 24 OZ 16 OZ AHW F 2GF 3GF 4GF AHW F 2GF 3GF 4GF CLAW HAMMER RIP ALL STEEL CLAW HAMMER 60411212 60412058 16, 20 OZ 16 OZ AHW F 2GF 3GF 4GF AHW F 2GF 3GF 4GF CARPENTER CLAW HAMMER WITH/WITHOUT MAGNET CLAW HAMMER FR TYPE 60412006 60412000 250, 350, 450 GMS 700 GMS AHW F 2GF 3GF 4GF AHW F 2GF 3GF 4GF 9 Hammers MACHINIST HAMMER BALL PEIN HAMMER 60411111 60411240 8, 12, 16, 20, 24, 32, 40, 48 OZ AHW F 2GF 3GF 4GF AHW F 2GF 3GF 4GF STONING HAMMER 60411142 100, 200, 300, 400,
    [Show full text]
  • In-Ex™ Chainsaw, Axe & Shovel Holder
    In-Ex™ P O Box 1010, 145 Harts Road Palmerston North Ph: 06 3546060 Fax: 06 3553199 In-Ex™ Chainsaw, Axe & Shovel Holder Part Number: 7004 (Leaflet Pt.No.2400-0950 Issue 3, October 2015) SAFE OPERATING INSTRUCTIONS An important message for owners and operators of In-Ex attachments/accessories. Your safety is In-Ex’s primary concern. It is important that you understand that any loads or attachments whether fastened to or placed on a vehicle or ATV will alter the stability and handling characteristics of that vehicle or ATV. We take this opportunity to remind you about the simple, basic and common sense rules of safety when using spray tanks or other equipment. NEVER EXCEED THE LOAD LIMIT CAPACITY OF THE ATV OR OTHER VEHICLE. Spray tanks or other equipment must be filled to a level where the gross weight is within the load limit of the ATV or other vehicle. EXERCISE EXTREME CAUTION WHEN OPERATING ON HILLY OR UNDULATING TERRAIN PLEASE BE CAREFUL! Failure to follow these rules can result to severe injury or death to operators or bystanders. any breach of warranty, any matter set out in this manual, or for WARRANTY defective equipment or advice relating to the equipment provided is limited at C-Dax’s option to: 1 WARRANTY AND LIABILITY (a) repairing or replacing the equipment (or part of the Use of the equipment equipment); or 1.1 You must satisfy yourself as to the suitability of the equipment for your intended use(s) of the equipment. (b) notifying the retailer of the equipment to refund the price for the equipment paid by you.
    [Show full text]
  • A Look at Wildland Firefighting Tools Fighting a Wildfire Safely Means
    Tools of the Trade – A Look At Wildland Firefighting Tools Fighting a wildfire safely means using the right tools for the job. There are a variety of wildland firefighting hand-operated tools in use today. Wherever water sources are available, heavy fire hoses with nozzles are hard to beat when it comes to suppressing wildfires, or most fires for that matter. But away from roads, fire engines and water tenders, using water to fight wildfires becomes more challenging for firefighters on foot. There are many portable water pumps today. Some float… others can be easily carried from place to place…even drafting from shallow and muddy water sources. These two-stroke pumps are made for demanding use on the fireline. The heaviest pumps are usually taken apart when carried from place to place. Fire hose comes in rolled sections of 50 and 100 feet, and in different sizes. In places where a water source is minimal or far from the firelines, conserving water with smaller diameter fire hoses is best. Away from roads, water pumps and hose supplies are delivered by helicopter, boats, even airplanes dropping paracargo. And where fire hoses can’t reach, collapsible bladder bags with hand- operated nozzles are a big help. Whether using water or not, wildland firefighters carry an array of tools to saw…chop…dig… swat…and scrape vegetation away from the flames. In many places, firefighters will construct a narrow path around the fire’s perimeter, free of vegetation. This ‘fireline’ prevents flames from spreading on the ground, as crews work to encircle the fire.
    [Show full text]
  • Wildland Fire Equipment 2019
    DEFENSE LOGISTICS AGENCY Wildland Fire Equipment 2020 DLA Wildfire Equipment Ordering - 2020 ABOUT THE DEFENSE LOGISTICS AGENCY (DLA) WILDFIRE EQUIPMENT PROGRAM. The program is available to all Department of Forestry and Fire Management (DFFM) Cooperators who have a current Intergovernmental Agreement (IGA). The catalog items aren’t stocked in our facility but are ordered and in most cases shipped direct from DLA Supply Depots. EQUIPMENT PROGRAM FAQ WHO CAN ORDER FROM THIS PROGRAM? All DFFM Cooperators who have a current Intergovernmental Agreement. WHY ORDER FROM THIS PROGRAM? While not trying to compete with the private sector fire equipment providers, the prices are generally lower. Also, the equipment is part of a National Fire Equipment System (NFES) which means if you damage or destroy a DLA acquired item, it can be replaced on an incident where a Supply Unit has been set up and stocked. DO THE PRICES CHANGE FROM WHAT IS IN THE CURRENT CATALOG? Yes but not often. As prices change the order form price list is updated and posted to the website. Check the date of your order form against the date on the website. Remember there is a 10% handling charge your order. This covers the admin cost of having the program available in Arizona. DOES THE PERSONAL PROTECTIVE EQUIPMENT MEET NFPA 1977 STANDARDS? Yes. Shirts, Pants, gloves, helmets, shrouds, fire shelters all meet the NFPA Standard. WHAT IF I ACCIDENTLY ORDER THE WRONG SIZE OR WRONG ITEM? CAN I RETURN IT? Possibly. If the item must be returned to DLA there is a 25% re-stocking charge.
    [Show full text]
  • Flat 6, Sterling House, 55 Wisewood Road, Wisewood, Sheffield, S6 4TB
    Flat 6, Sterling House, 55 Wisewood Road, Wisewood, Sheffield, S6 4TB Price guide £140,000 to £145,000 Sheield’s Hospice 55 Wisewood Road Wisewood Price guide £140,000 to £145,000 PRICE GUIDE £140,000-£145,000 *** NO CHAIN *** LIFT *** Situated in this extremely convenient location is this first floor, well appointed two double bedroom apartment which benefits from a LIFT, electric heating and double glazing. The accommodation briefly comprises: hallway with intercom, beautiful modern kitchen with integrated oven, induction hob and dishwasher, space for fridge and plumbing for washing machine. Well proportioned lounge with dining room area to one side, feature French doors, balconette and additional windows either side making it bright and airy. Two excellent double bedrooms both benefiting from quality built in wardrobes and a modern and contemporary bathroom in addition with full suite including large walk in shower with central fed shower, WC, wash basin and beautifully tiled throughout. • LIFT • CONVENIENT LOCATION • TWO DOUBLE BEDROOMS • FIRST FLOOR APARTMENT • ALLOCATED PARKING SPACE Outside: Allocated Parking Space, EPC rating D. Situated in this extremely convenient location. Regular public transport. Easy access to Sheffield city centre, Hospitals and Universities. Whilst we endeavour to make our sales particulars fair, accurate and reliable, they are only a general guide to the property. If there is any point which is of particular importance to you, please contact the relevant office. The Agents have not tested any apparatus, equipment, fittings or services and so cannot verify they are in working order. The buyer is advised to obtain verification. All plans, floor plans and maps are for guidance purposes only and are not to scale.
    [Show full text]
  • Oughtibridge. Browning George, M.R.C.S., L.S.A
    132 Oughtibridge. Browning George, M.R.C.s., L.S.A. Hayward John, butcher Rose lsaac, farmer, Brightholmlee surgeon and medical officer to Helliwell Benjamin, farmer, Bright- Rowland Ellis, farmer, Can house W ortley Union holmlee Sanderson Fredk. joiner & wheelwrt BurkinshawRy.mngr.Wharncliffe side Hill Wm. grocer, Upper Middlewood Sanderson Geo. mule spindle manfr Cadman Thos. farmer, Brightholmlee Hirst Mrs Samh, shopkeeper Scott J osepb, manager CoIling John, National schoolmaster Hobson Mrs Eliza,shopkeeper Shuttleworth George, general smith Co-operative cj IndWltrial Society (lim.) Rolmes John,farmer, Wharncliffe Side Shuttleworth Thomas Batt, manager grocers,&c; Geo.lbbotson, manager lIouldsworth Thomas, file manager Silica Fire Brwk Co. (Brookes, Green Cooper Aaron, grocer Howe J oseph, vict. Stanley Arms & Co.) fire brick manufacturers Couldwell Renry, grocer Howe William, vict. The Cock Stacey Elijah, Endowed schoolmaster, Crapper George, brick manufacturer Hudson John, farmer, Coldwell Onesacre (Turner Bros.); h Middlewood cot Hutchinson Albert,hosier, draper, and Stanley Mrs Martha, shopkeeper Crii.wshaw John Earnshaw, farmer, spring knife manufacturer Stanley William, farmer Onesacre Ibbotson George, farmer, Rollin hill Swift Thomas, coal mert. and builder Crawshaw Thomas, farmer, Coums 1bbotson George, manager Taylor John, hosier and draper Denton Miss Sarah Ann, beerhouse 1bbotson Henry, grocer and victualler, Trickett John Thomas, registrar for Dickinson Benjn. frmr. Brightholmlee Filesmiths' Arms births and deaths, vaccination officer Dickinson Mrs Ellen, Dyson Rolmes, Ibbotson Joseph, farmer and 'bus pro­ for BradfieId township, andcoal mert Wharncliffe Side - prietor, Hagg Stones Turner Bros. fire brick manufacturers Dixon Joseph (P. & Son) Ray George, joiner and wheelwright Tym William, blacksmith Dixon Peter & Son, paper manufac- Lawton Benjamin, joiner and wheel- Walker John, blacksmith~ Wharn­ turers, Spring Grove Paper mills wright, Wharncliffe Side cliffe Side Dixon Willill.m Denison (P.
    [Show full text]
  • Combined Plastics 1 Combined Plastics 2 Ladies Plastics
    COMBINED PLASTICS 1 Date Time Opponents Where 24/Oct/2017 (Tuesday) 20:15 Wisewood 1 Wisewood Sports Centre, 75 Laird Road, Sheffield. S6 4BS. 17/Nov/2017 (Friday) 19:00 Abbeydale Park 2 King Edward VII Lower School, Darwin Lane, S10 5RG. 14/Dec/2017 (Thursday) 19:30 Stocksbridge Stocksbridge High School, Shay House Lane, Sheffield. S36 1FD. 08/Jan/2018 (Monday) 19:00 Ranmoor 1 Ecclesfield School Sports, Hall, Chapeltown Road, Ecclesfield, Sheffield. S35 9WD. 26/Jan/2018 (Friday) 19:00 Stocksbridge King Edward VII Lower School, Darwin Lane, S10 5RG. 18/Feb/2018 (Sunday) 11:30 Broomgrove 2 Birkdale School, 4 Oakholme Road, Sheffield S10 3DH 12/Mar/2018 (Monday) 19:30 Abbeydale Park 2 Abbeydale Road South, Dore, Sheffield. S17 3LJ. 16/Mar/2018 (Friday) 19:00 Ranmoor 1 King Edward VII Lower School, Darwin Lane, S10 5RG. 24/Apr/2018 (Tuesday) 19:00 Wisewood 1 King Edward VII Lower School, Darwin Lane, S10 5RG. 27/Apr/2018 (Friday) 19:00 Broomgrove 2 King Edward VII Lower School, Darwin Lane, S10 5RG. COMBINED PLASTICS 2 Date Time Opponents Where 03/Nov/2017 (Friday) 19:00 Steel City King Edward VII Lower School, Darwin Lane, S10 5RG. 11/Nov/2017 (Saturday) 10:00 Wisewood 2 Wisewood Sports Centre, 75 Laird Road, Sheffield. S6 4BS. 08/Dec/2017 (Friday) 19:00 Grenhilheg Henry Fanshawe School, Green Lane, Dronfield, Derbyshire, S18 8FZ 12/Dec/2017 (Tuesday) 19:15 Steel City Concord Sports Centre, Shiregreen Lane, Sheffield. S5 6AE. 02/Feb/2018 (Friday) 19:00 Abbeydale Park 3 King Edward VII Lower School, Darwin Lane, S10 5RG.
    [Show full text]
  • “The Tools We Use and Recommend.”
    “The tools we use and recommend.” Razorsharp Pruners Greg Redwood page Head of Great SJ 8 Glasshouses & Horticultural Training Royal Botanic Gardens, Kew. Stainless London, England Hand Tools page SJ 6 Stainless Digging Tools page SJ 4 Razorsharp Loppers page SJ 13 SJ 1 Over 250 years “Try Me” of gardening Packs experience Eye-catching “Try Me” packs for Pruners and Secateurs allow customers to handle the Hang products Tags and feel their function and Attractive swing tag and embossed quality before Kew Gardens seal expresses the close buying. relationship between Kew Gardens and Spear & Jackson. These hang tags are included with most of the Digging Tools, Hand Tools, Cultivators, Shears and Loppers. 10YEAR GUARANTEE These products are guaranteed for 10 years against defects in manufacturing, subject to normal wear and tear and the provision of reasonable care and maintenance. Defective products will be replaced at no charge. Kew Gardens Collection pear & Jackson traces its origins to 1760 In recent years, Kew’s horticultural Poster & Counter Card S in Sheffield, England. S&J now produces team have worked closely with Spear & “The tools we use and a wide range of Agricultural and Gardening Jackson throughout the product develop- recommend.” Poster describes the cooperation between tools that are exported all over the world. ment process, to design a range of digging, Razorsharp Kew Gardens and Spear & Jackson in creating These combine traditional production methods cultivating and garden cutting tools that Pruners this prestigious range of garden tools. with the latest manufacturing technology. are genuinely Stainless Use as a wall poster or use the built-in Designed with durability, comfort and “used and Hand Tools FSC Approved Greg Redwood easel to create a free-standing counter card.
    [Show full text]