Fabrics Grading

Total Page:16

File Type:pdf, Size:1020Kb

Fabrics Grading Fabric Catalog 2019 Sylvester Alexander 526 10th St. Blvd. NW Hickory, NC 28601 (P/F)828-838-1099 Cleaning Codes W- Spot clean with soap and water: Clean this fabric with the foam only of a water-based cleaning agent to remove overall soil. Many household cleaning solvents are harmful to the color and life of the fabric. Cleaning by a professional furniture cleaning service only is recommended. To prevent overall soil, frequent vacuuming or light brushing to remove dust and grim is recommended. S- Solvent clean only: Clean this fabric with pure solvents (petroleum distillate-based products, Energine, Carbona, or similar products may be used) in a well-ventilated room. Cleaning by professional furniture cleaning service only is recommended. Caution: Carbon Tetrachloride, as is it is highly toxic. To prevent overall soil, frequent vacuuming or light brushing to remove dust and grime is recommended. WS- Solvent or spot clean: Clean this fabric with the foam only of a water-based cleaning agent or with a pure solvent in a well-ventilated room (petroleum distillate-based products, Energine, Carbona, or similar products may be used). Cleaning by a professional furniture cleaning service is recommended. To prevent overall soil, frequent vacuuming or light brushing to remove dust and grime is recommended. X- Clean this fabric only by vacuuming or light brushing to prevent accumulation of dust or grime. Water-based foam or solvent based cleaning agents of any kind may cause excessive shrinking or fading. Resilience TX- Every Resilience TX fabric is tested and ensured not to pill or fuzz up like an old sweater. Resilience TX fabrics are immersed in stain-resistant finish allowing liquids to bead up; blot spill with towel. Fabric Grade (B) $15-$18 (C) $19-$22 (D) $23-$35 (E) $27-$30 (F) $31-$34 (G) $35-$38 (H) $39-$42 (I) $43-$46 (J) $47-$50 (K) $51-$54 (L) $55-$58 (M) $59-$62+ Leather Grade (B) $5-$7 (C) $8-$9 (D) $10-$11 (E) $12-$13 (F) $14+ The recommended cleaning codes are devised as the results of tests made by the fabric manufacturers having adhered to the methods requested by the Joint Industry Upholstery Standards Committee. They in no way intend to imply that we are in any way guaranteeing these fabrics or the cleanability thereof. The fabric list is not entirely conclusive of the fabrics available online. Prints and new fabric information are available by calling customer service at 828-838-1099. Crypton Home Pattern: Bae Pattern: Coconut Content: 100% Polyester Content: 53% Olefin, 47% Polyester Railroad: E Railroad: Yes Cleanability: W Cleanability: W Abrasion: 39,000 DR Abrasion: 60,000 DR Grade: E Grade: C Pattern Charlotte Pattern: Disco Crepe Content: 100% Polyester Content: 51% Solution Dyed Nylon, 49% Poly Repeat: N/A Repeat: N/A Cleanability: W Cleanability: W Abrasion: 50,000 DR Abrasion: 100,000 DR Grade: M Grade: K Pattern: Fire Pattern: Hayley Content: 100% Recycled Polyester Content: 100% Polyester Repeat: H 0” V 0.35” Rail Road Repeat: N/A Cleanability: W Cleanability: W Abrasion: 60,000 DR Abrasion: 50,000 DR Grade: M Grade: L Pattern: Gibson Pattern: Granbury Content: 100% Polyester Content: 79% Rayon, 21% Polyester Railroad: No Railroad: Yes Cleanability: WS Cleanability: W Abrasion: 204,000 DR Abrasion: 63,000 DR Grade: D Grade: E Pattern: Henry Pattern: Jumper Content: 100% Polyester Content: 82% Rayon, 16% Poly, 2% Nylon Railroad: No Railroad: Yes Cleanability: W Cleanability: W Abrasion: 100,000 DR Abrasion: 63,000 DR Grade: E Grade: F Pattern: Pioro Line Pattern: Sophie Content: 49% Solution Dyed Nylon, 51% Polyester Content: 100% Polyester Repeat: H 0” V 0.375” Railroad Repeat: N/A Cleanability: W Cleanability: W Abrasion: 50,000 DR Abrasion: 50,000 DR Grade: L Grade: I Pattern: Stillion Stripe Pattern: Strata Content: 44% Solution Dyed Nylon, 56% Poly Content: 100% Recycled Polyester Repeat: H 4.875” V 0.375” Repeat: H 0” V 5.25” Cleanability: W Cleanability: W Abrasion: 50,000 DR Abrasion: 50,000 DR Grade: M Grade: K Solids Pattern: Amelia Pattern: Arban Rib Content: 100% High UV Polyester Content: 47% Nylon, 53% Polyester Repeat: N/A Repeat: Railroad Cleanability: Bleach Clean Cleanability: W Abrasion: 48,000 DR Abrasion: 100,000 DR Grade: L Grade: L Pattern: Balsamo Pattern: Banks Content: 84% Rayon, 16% Cotton Content: 82% Polyester, 18% Cotton Railroad: Yes Railroad: No Cleanability: S Cleanability: S Abrasion: 30,000 DR Abrasion: 100,000 DR Grade: E Grade: F Pattern: Bedford Pattern: Bleecker Content: 100% Polyester Content: 100% Polyester Repeat: N/A Repeat: N/A Cleanability: Resilience TX Cleanability: Resilience TX Abrasion: 100,000 DR Abrasion: 100,000 DR Grade: D Grade: D Pattern: Bliss Pattern: Briallen Content: 90% Sunbrella Acrylic, 10% Solution Content: 86% Rayon, 14% Cotton Dyed Polyester Railroad: No Repeat: N/A Cleanability: S Cleanability: Bleach Cleanable Abrasion: 30,000 DR Abrasion: 30,000 DR Grade: G Grade: M Pattern: Cambric: Pattern: Conga Content: 90% Polyester, 10% Linen Content: 100% Bell-Dura Polyolefin Railroad: E Repeat: H 14” V 11.25” Cleanability: S Cleanability: Bleach Cleanable Abrasion: 90,000 DR Abrasion: 60,000 DR Grade: C Grade: M Pattern: Cortlandt Pattern: Crosby Content: 100% Polyester Content: 100% Polyester Repeat: N/A Repeat: N/A Cleanability: Resilience TX Cleanability: Resilience TX Abrasion: 100,000 DR Abrasion: 100,000 DR Grade: E Grade: J Pattern: Dart Pattern: Essex Content: 100% Bella-Dura Polyolefin Content: 100% Polyester Repeat: H 6.75” V 3.375” Repeat: N/A Cleanability: Bleach Cleanable Cleanability: Resilience TX Abrasion: 80,000 DR Abrasion: 100,000 DR Grade: M Grade: E Pattern: Evere Pattern: Fedora Content: 51% Rayon, 22% Linen, Content: 100% Polyester 16% Polyester, 11% Cotton Railroad: E Railroad: E Cleanability: S Cleanability: S Abrasion: 60,000 DR Abrasion: 18,000 DR Grade: B Grade: E Pattern: Fulton Pattern: Fisher Content: 100% Polyester Content: 100% UV Polyester Repeat: N/A Repeat: H 1.5” V 0” Cleanability: Resilience TX Cleanability: Bleach Cleanable Abrasion: 100,000 DR Abrasion: 100,000 DR Grade: M Grade: M Pattern: Gent Pattern: Garnet Content: 80% Rayon, 20% Linen Content: 58% Rayon, 35% Polyester, Railroad: No 7% Cotton, 1% Nylon Cleanability: S Railroad: Yes Abrasion: 30,000 DR Cleanability: S Grade: D Abrasion: 54,000 DR Grade: E Pattern: Hadley Pattern: Greenwich Content: 100% Bella-Dura Polyolefin Content: 100% Polyester Repeat: H 4.5” V 3.73” Repeat: N/A Cleanability: Bleach Cleanable Cleanability: Resilience TX Abrasion: 80,000 DR Abrasion: 100,000 DR Grade: M Grade: E Pattern: Handloom Pattern: Halsey Content: 100% Bella-Dura Polyolefin Content: 100% Bella-Dura Polyolefin Repeat: H 1.80” V 3.2” Repeat: H 0.18” V 8.10” Cleanability: Bleach Cleanable Cleanability: Bleach Cleanable Abrasion: 50,000 DR Abrasion: 55,000 DR Grade: M Grade: M Pattern: Hudson Pattern: Home Run Content: 100% Polyester Content: 100% Polyester Repeat: N/A Railroad: Yes Cleanability: Resilience TX Cleanability: S Abrasion: 100,000 DR Abrasion: 66,000 DR Grade: E Grade: B Pattern: Illumination Pattern: Inspiration Content: 100% Post-Consumer Recycled Poly Content: 100% Post-Consumer Recycled Poly Repeat: N/A Repeat: N/A Cleanability: Greenshield Cleanability: Greenshield Abrasion: 185,000 DR Abrasion: 250,000 DR Grade: M Grade: M Pattern: Lafayette Pattern: Lewitt Content: 60% Acrylic, 40% Polyester Content: 100% Bella-Dura Polyolefin Repeat: N/A Repeat: H 4.75” V 0.5” Cleanability: Resilience TX Cleanability: Bleach Cleanable Abrasion: 100,000 DR Abrasion: 50,000 DR Grade: H Grade: M Pattern: Loomis Pattern: Ludlow Content: 100% Bella-Dura Polyolefin Content: 100% Polyester Repeat: H 0.08” V 0.125” Repeat: N/A Cleanability: Bleach Cleanable Cleanability: Resilience TX Abrasion: 90,000 DR Abrasion: 100,000 DR Grade: M Grade: E Pattern: Manalapan Pattern: Marco Content: 61% Rayon, 21% Polyester, Content: 100% UV Polyester 18% Cotton Repeat: N/A Railroad: Yes Railroad: Yes Cleanability: S Cleanability: Bleach Cleanable Abrasion: 45,000 DR Abrasion: 90,000 DR Grade: G Grade: K Pattern: Mercer Pattern: Mikasa Content: 100% Polyester Content: 48% Cotton, 47% Viscose, 5% Flax Repeat: N/A Repeat: H 0.37” V 0.25” Cleanability: Resilience TX Cleanability: S Abrasion: 100,000 DR Abrasion: DR Grade: K Grade: L Pattern: Montauk Pattern: Morado Content: 92% Polyester, 8% Linen Content: 100% Bella-Dura Polyolefin Repeat: N/A Repeat: H 0.125” V 0.125” Cleanability: Resilience TX Cleanability: Bleach Clean Abrasion: 100,000 DR Abrasion: 65,000 DR Grade: E Grade: M Pattern: Perry Wool Pattern: Rodeo Content: 70% Wool, 20% Polyester, 5% Nylon, Content: 100% Polyester 5% Acrylic Railroad: E Repeat: N/A Cleanability: WS Cleanability: X Abrasion: 60,000 DR Abrasion: 100,000 DR Grade: B Grade: L Pattern: Rubino Pattern: Savile Content: 70% Rayon, 30% Polyester Content: 92% Polyester, 8% Linen Railroad: Yes Railroad: Yes Cleanability: S Cleanability: S Abrasion: 45,000 DR Abrasion: 63,000 DR Grade: D Grade: B Pattern: Siesta Pattern: Snapshot Content: 100% UV Polyester Content: 82% Polyester, 18% Rayon Repeat: H 13.5” V 27” Railroad: Yes Cleanability: Bleach Cleanable Cleanability: S Abrasion: 100,000 DR Abrasion: 60,000 DR Grade: M Grade: B Pattern: Striato Pattern: Thompson Contents: 93% Polyester, 7% Rayon Content: 100% Polyester Railroad: No Repeat: N/A Cleanability: S Cleanability: Resilience TX Abrasion: 60,000 Abrasion: 100,000 DR Grade: F Grade: K Pattern: Synergy Pattern: Zesty Content: 100% Polyester Content: 76% Polyester, 21% Acrylic, Railroad: E 3% Linen
Recommended publications
  • A Comparison of the ICI Pillbox and The
    Deakin Research Online This is the published version: McGregor, Bruce A. 2006, A comparison of the ICI Pillbox and the Random Tumble Methods is assessing pilling and appearance change of worsted spun cashmere and cashmere- wool blend knitwear, International journal of sheep and wool science, vol. 54, no. 3, pp. 66- 73. Available from Deakin Research Online: http://hdl.handle.net/10536/DRO/DU:30024577 Reproduced with the kind permissions of the copyright owner. Copyright : 2006, University of New England International Journal of Sheep and Wool Science Volume 54, Issue 3 2006 Article 5 A Comparison Of The ICI Pillbox And The Random Tumble Methods Is Assessing Pilling And Appearance Change Of Worsted Spun Cashmere And Cashmere-Wool Blend Knitwear Bruce A. McGregor∗ ∗Primary Industries Research Victoria, [email protected] Copyright c 2006 International Journal of Sheep and Wool Science. All rights reserved. A Comparison Of The ICI Pillbox And The Random Tumble Methods Is Assessing Pilling And Appearance Change Of Worsted Spun Cashmere And Cashmere-Wool Blend Knitwear∗ Bruce A. McGregor Abstract This study evaluated the differences between two international test methods on the assessment of pilling and appearance change of worsted spun cashmere and superfine wool knitwear and their blends. Differences between the standard ICI Pill Box Method and the Random Tumble Method were found in both the significance and magnitude of resistance to pilling and appearance change and the amount of fabric mass loss of worsted spun cashmere and cashmere superfine wool blend knit fabrics. The ICI Pill Box Method differentiated to a greater extent the effects of wool type and blend ratio of cashmere and wool compared with the Random Tumble Method.
    [Show full text]
  • Know Your Body Know Your Style
    KNOW YOUR BODY KNOW YOUR STYLE Our bodies are classified according to certain specific types of silhouettes. You will learn about your body type, the clothes that favor each silhouette and those that should definitely be avoided. Your body shape may have traits of two types of silhouettes. Stand in front of a full-length mirror in your underwear and carefully study your body shape. Regardless of whether you are slim or plump, your body will tend to predominantly conform to one of the body types described below. Knowing your silhouette, you will be able to know what type of outfits that will make you look great, and which ones you should avoid as they throw the shape of your body off balance. 2020 Playfication Learning, LLC © PagePage 1 of 1 8 of 8 HOURGLASS SHAPE This type of female figure is typically considered the perfect figure because it is the most proportionate. It is the most versatile body shape and practically everything that women with this figure wear looks good on them. However, you should avoid falling into exaggerations that unbalance your body. You have an hourglass figure, when your shoulders and hips measure the same, and your waist is narrower. You have a balanced and symmetrical body. Clothes that lengthen your body will accentuate your figure and make you look great. What to wear: 1. Wrap dresses and “A” shaped skirts 2. Dresses with a defined waist and knee-length skirts highlighting your curves 3. Solid colors 4. Two-piece dresses 5. Shirt dresses with a waist belt 6.
    [Show full text]
  • Ohio Hardwood Furniture Fabric Grade Sheet Comfort Design Furniture
    Ohio Hardwood Furniture Fabric Grade Sheet Comfort Design Furniture COMFORT DESIGN GRADE SHEET S-STATIONARY FALL 2016 M-MOTION ALPHABETICAL P-PILLOW CLEAN RESTR CTRY ST NEW FABRIC DESCRIPTION CONTENT % GRD * GRP CODE CODE CATEGORY ORG FDM PILL C ABBY CHARCOAL Cotton 100 BB 300 S RESTR S,P USA C+ RST to M styles C ABBY RAIN Cotton 100 BB 300 S RESTR S,P USA RST to M styles ACCRINGTON DAISY Polyester 100 T 200 S RESTR S,P PAK B- PILL RST to M styles AKANA LEMONGRASS Polyester 42 FF 300 S RESTR S,P TUR C+ PILL RST to CHAIRS, OTTOMANS, PILLOWS Cotton 58 ALLSPICE MIST Polyester 23 FF 300 WS ALL S,M,P USA N Polyurethane 77 AMADEUS PHEASANT Polyester 100 PP 500 WS ALL S,M,P CHI C+ PILL RST to CHAIRS, OTTOMANS, PILLOWS on M styles 0 C NEW ANGIA ADMIRAL Polyester 100 BBB 600 S RESTR S,P CHI N PILL RST to CHAIRS, OTTOMANS, PILLOWS C NEW ANGIA LINEN Polyester 100 BBB 600 S RESTR S,P CHI N PILL RST to CHAIRS, OTTOMANS, PILLOWS C ANTIQUITY CHARCOAL Cotton 100 V 200 S RESTR S,P USA C ANTIQUITY CLOUD Cotton 100 V 200 S RESTR S,P USA C ANTIQUITY CREAM Cotton 100 V 200 S RESTR S,P USA C ANTIQUITY GREYSTONE Cotton 100 V 200 S RESTR S,P USA C ANTIQUITY INDIGO Cotton 100 V 200 S RESTR S,P USA C+ APREA DOE Polyester 52 II 400 S RESTR S,M,P CHI B- PILL RST to CHAIRS, OTTOMANS, PILLOWS on M styles Rayon 48 ARDMORE NIGHT Polyester 100 X 200 S ALL S,M,P CHI C+ ARTBAND SEAGLASS Polyester 100 JJ 400 S RESTR S,P CHI N PILL RST to CHAIRS, OTTOMANS, PILLOWS on M styles Polyester 100 C NEW ASHCOMBE ADMIRAL Cotton 70 FFF 700 S ALL S,M,P CHI N PILL RST to CHAIRS, OTTOMANS,
    [Show full text]
  • Textile Quality Standards
    Materials Textiles Quality Control Standards and Testing Procedures At Herman Miller, all materials undergo testing. Initial testing is done when a new product, process, or supplier is accepted. These tests lead to the development of quality standards, which our suppliers take responsibility for meeting. Quality is checked at suppliers, as materials are received in our facilities, and throughout production. All Herman Miller textiles are tested for their ability to stand up to the kind of wear they are likely to get in actual use, including fire retardancy, elongation, strength, and color transfer. Qualities such as surface texture, pattern, ability to absorb or reflect light, ability to conform to product, and ability to respond within an environment when placed next to woods, laminates, glass, carpeting, painted surfaces, or other textiles are also taken into consideration. When possible, our test procedures conform to the methods Flame resistance established by the American Society for Testing and Materials Fabric’s ability to resist burning (ASTM). Herman Miller strives to meet and exceed all industry Note: Test is dictated by the intended end use for the fabric. standards pertaining to our products. Application Passes The Association for Contract Textiles (ACT) has developed five symbols that assure contract fabrics perform to industry Woven Upholstery Vertical Flame Test - California standards and pass all applicable testing. These symbols Technical Bulletin 117-2013 are included on all Herman Miller textile swatch cards where applicable: Panels and Upholstered Walls Tunnel Test - ASTM E 84 (unadhered method) Flame resistance Fabric’s ability to resist burning Vertical Flame Test: Fabric is mounted in a vertical holder and exposed to an open Crocking resistance Fabric’s colorfastness and ability to retain color is flame for a specified amount of time.
    [Show full text]
  • Water Management in Leather Industry
    Journal of Scientific & Industrial Research Vol. 60, June 2001, pp 443-450 Water Management in Leather Industry V John Sundar, R Ramesh, PS Rao, P Saravanan, B Sridharnath and C Muralidharan Central Leather Research Institute, Adyar, Chennai 600 020, India Received: 02 June 2000; accepted: 10 November 2000 Leather industry, like paper and textile industries, consumes large quantities of water. Such excessive usage, resulting from adoption of traditional processing methods and equipments, lead to acute water availability and eftluent treatment problems. Presently, about 30 billion litres of water is being used by this industry annually. A systematic study made at CLRI to reduce the excessive usage and further minimise water consumption in leather processing through optimisation and recycle and reuse strategies. The role of newer equipments, such as the hide processor and th e compartmental drum in minimising water usage in leather processing has also been studied extensively. Most of the protocols standardised at CLRI were implemented at select tanneries in Indi a and Sri Lanka, which resulted in better water management in the leather processing industry. The results of such detailed studies have been incorporated in the paper. Introduction vation efforts. The major responsibility, however, falls Water utilisation by mankind may be divided into three on the industry. broad categories, agricultural, domestic and industrial. Apparently, there is no dearth of water as 80 per cent of the earth's surface is covered by water. Even then, the Water Usage in Leather Industry world is heading towards a water crisis because 97.5 per cent of the global water reserve is salt water and only Water is an important medium in leather processing.
    [Show full text]
  • General Pests
    Kentucky Pesticide Education Program copyright © 2016 University of Kentucky Department of Entomology General Pests Written by: Michael F. Potter and G. Mark Beavers Ants Ants are the most frequent and persistent pests encountered around homes and buildings. Dozens of different species occur around homes and buildings, each has unique characteristics that may influence the most effective control method to use. In Kentucky, the most common house-invading ants include pavement ants, carpenter ants, acrobat ants, and odorous house ants. Besides being a nuisance, ants contaminate food, build unsightly mounds, or cause structural damage by hollowing out wood for nesting. Most species of these social insects live in belowground colonies. Exceptions include carpenter ants and acrobat ants that live in moist wood. Some species enter buildings in search of sweet or fatty substances. Others live in lawns and gardens or under rocks, patios, or sidewalks. While many of these species do not enter buildings, the mounds of fine soil that they bring to the surface while excavating can be a nuisance. Wingless worker ant with elbowed antennae and narrow waist between thorax and abdomen. (www.antark.net) Ants range from less than 1/8-inch to 1/2-inch long. Most have black bodies but some are yellow or red. All have chewing mouthparts. Ants undergo complete metamorphosis with 4 life stages: egg, larva, pupa, and adult. Ants are social insects that live in cooperative, intermingling colonies consisting of hundreds to thousands of individuals. There are different types of individuals (castes) in each colony that perform specific functions. All ant colonies contain one or more egg-laying queens.
    [Show full text]
  • About Leather Types of Leather
    About Leather Types of Leather Leather is an ancient, durable material created through a process of tanning animal rawhide to preserve it and make it pliable when dry. Many features of natural leather make it superior to synthetic products including durability, comfort, beauty, suppleness, and resilience. Plus, leather’s ability to patina and absorb body oils continues to enhance the leather’s appearance and makes it more beautiful over time. Leather can broadly be divided into full grain, enhanced grain, corrected grain, top grain and split leathers. Full Grain Leather Full grain leather has no surface alterations. The hide’s natural pores and grain textures are intact and it will develop a patina over time. The tiny pinholes dotting the surface indicate the hide’s open hair follicles. The presence of these hair follicles demonstrates a high quality surface which has not been altered to conceal flaws. This full grain surface breathes. It keeps the user Full grain comfortable as it adjusts to body temperature. Full grain leather is the highest quality, most beautiful, and most comfortable leather available. Enhanced Grain Leather Enhanced grain leather is a full grain with an artificial grain embossed over the natural grain. Enhanced grain leather has the same comfort and breathability of a full grain, but the surface has received minor alteration to improve grain Enhanced grain appearance. Corrected Grain Leather Corrected grain leather is produced from the upper portion of the hide. The surface is lightly sanded or refined then embossed with an artificial grain texture. Corrected grain leathers have a more consistent appearance across the entire surface.
    [Show full text]
  • Downloading Or Purchasing Online Through Our Website
    Improved Preservation and Early Stage Processing of Australian Crocodile Skins A report for the Rural Industries Research and Development Corporation by Stephen Hawkins and Chi Huynh CSIRO Textile and Fibre Technology December 2004 RIRDC Publication No 04/164 RIRDC Project No CWT-3A © 2004 Rural Industries Research and Development Corporation. All rights reserved. ISBN 1 74151 073 2 ISSN 1440-6845 ‘Improved Preservation and Early Stage Processing of Australian Crocodile Skins’ Publication No. 04/164 Project No. CWT-3A The views expressed and the conclusions reached in this publication are those of the author and not necessarily those of persons consulted. RIRDC shall not be responsible in any way whatsoever to any person who relies in whole or in part on the contents of this report. This publication is copyright. However, RIRDC encourages wide dissemination of its research, providing the Corporation is clearly acknowledged. For any other enquiries concerning reproduction, contact the Publications Manager on phone 02 6272 3186. Researcher Contact Details Dr. Stephen C Hawkins CSIRO Textile and Fibre Technology, PMB 10, Clayton MDC, Victoria 3168 Phone: 03 9545 2364 Fax: 03 9545 2363 Email: [email protected] In submitting this report, the researcher has agreed to RIRDC publishing this material in its edited form. RIRDC Contact Details Rural Industries Research and Development Corporation Level 1, AMA House 42 Macquarie Street BARTON ACT 2600 PO Box 4776 KINGSTON ACT 2604 Phone: 02 6272 4819 Fax: 02 6272 5877 Email: [email protected] Website: http://www.rirdc.gov.au Published in December 2004 Printed on environmentally friendly paper by Canprint Foreword The skin of the Australian saltwater crocodile, (Crocodylus porosus) reputedly produces the best quality crocodile leather in the world.
    [Show full text]
  • Directions Nutan Final 3-26-19
    NuTanTM The next generation in all-in-one tanning A new, advanced and easy to use liquid tanning agent for hair-on tanning. Better stretch Less shrinkage Softer tan Faster penetration and tanning action Directions: Bring product to room temperature and shake well before using, especially in winter months. Wear splash proof goggles and rubber gloves to avoid any eye or skin irritation. Read directions completely prior to starting. Step 1: Be sure the hide is free of flesh, fat and membrane. If needed, a fleshing knife can be used. Step 2: If the hide has already been salted, skip to Step 3. If not, lay the hide flesh side up and apply a heavy layer of fine salt (table or canning salt, DO NOT use rock salt) and thoroughly rub in. Leave the salted hide lying flesh side up for a minimum of 12 hours. The next day, shake off the excess salt, discard, and re-apply a layer of new salt. Let this sit again for a minimum of 12 hours. Step 3: In a plastic or rubber container large enough to hold the hide, create a salt bath by mixing 1/2 lb. of salt to each gallon of hot water. Do not use a metal container. Mix enough solution to cover the hide completely. Allow the mixture to cool to room temperature before completely submersing the salted hide. Note: Never place a hide in hot water, as this can loosen the hair and cause bacteria growth. If the hide is hard and dried out, it can be rehydrated by using Hide Relaxer XL-7.
    [Show full text]
  • The London Leather, Hide and Wool Exchange by Jennie Howells October 2019
    Bermondsey Street Back Stories Number 5: An Ornament to the District: The London Leather, Hide and Wool Exchange By Jennie Howells October 2019 The proud frontage on Weston Street Everything in Leather Bermondsey’s fame as a centre of the leather industry was widespread. It had a plentiful supply of water, renewed twice daily by the tidal flow of the Thames. Many of the substances needed to tan leather were available locally. The trade had a unique aroma and its complicated and often repellent processes led to its development away from the City of London, in a less salubrious area, Bermondsey, south of the river! Note ‘hide’ was used for cattle skin and the skins of every other animal were known as ‘leather’. The Leather Industry dominated Bermondsey By the 19th century, the noise and bustle of tanning, leatherworking and allied occupations dominated the district. Small artisan businesses grew into large commercial operations managed by men powerful within their enterprise and influential in the local community. Bermondsey’s marketing slogans ‘There is nothing like leather’ and ‘Everything in Leather’ were widely recognised. The leather companies were major employers and their leaders were local personalities. In many ways, the opening of the Exchange building marked the peak of the industry in Bermondsey. Bevington, a well-known leather firm and personality Bevington, founded in 1800 at Neckinger Mill, Abbey Street was a family firm that achieved an international reputation. Samuel Bourne Bevington was active in civic life and local philanthropy. He was President of the Working Men’s Institute, first established in Bermondsey Street in 1857 and became the first Mayor of Bermondsey in 1901.
    [Show full text]
  • Sanmar Glossary of Terms August 2019 1X1 Rib Knit. This Narrow Rib
    SanMar Glossary of Terms August 2019 1x1 Rib Knit. This narrow rib has a soft, fine hand and retains its slim fit. 2x1 Rib Knit. Textured rib knit with a comfortable stretch—made to be worn alone or layered. 2-Way Zipper. A zipper with two zipper pulls so the garment can be unzipped from either direction. 3-in-1 Jacket. A jacket that consists of two jacket layers that zip together. You can wear either jacket layer separately, or zip them together for extra warmth and weather protection. 4-Needle Stitching. A finish commonly used on a sleeve or bottom hem that uses four needles to create parallel rows of visible stitching, giving the garment a cleaner, more finished look, as well as adding durability. 4-Way Stretch. A fabric that stretches both on the crosswise and lengthwise grains of the fabric. Also called mechanical stretch, except mechanical stretch doesn’t use spandex or other stretch yarns. Air Jet Yarn. A type of open-end spinning that uses a stationary tube in which jets of air are directed to cause fibers to twist thereby forming a yarn. This process definitely influences the soft hand feel of the fabric while maintaining excellent resistance to pilling. Airlume Combed and Ring Spun Cotton (BELLA+CANVAS). 100% Airlume combed and ring spun cotton, 32 singles. BELLA+CANVAS removes 2.5x more impurities than standard ring spun cotton and uses only long cotton staples, which means there are less stray fibers when the yarn is spun, resulting in a smoother print surface. All-Weather Microfiber.
    [Show full text]
  • 2019.12 the Making of a Skirt
    Iti Fabvssa The Making of a Skirt Since March of 2018, the Historic Preservation department staff and tribal members have been working together to learn about Choctaw textiles that go back thousands of years. Through this community effort, we learned enough to create a completed an vlhkuna, a skirt, modeled after a 1700’s bison wool and plant fiber skirt. According to an anonymous French chronicler writing in the mid-1700’s, Choctaw women made “a fabric, partly of [bison] wool, and partly of fibre from a very strong herb which they spin. This fabric is double like two-sided handkerchiefs and thick as canvas, [about 22.5 inches wide and 33.75 inches long].” The first step towards making the skirt was to use the 1700’s description to help us plan for the materials and steps in the project. We determined how much yarn we needed, what size the skirt would need to be for the model, what pattern we would use, and how we would use the bison and plant materials together. We decided to use dogbane as our plant material. While it appears to be a simple stick, dogbane is a widely used native textile material in the Southeast and across North America. In the end, we needed about 400 yards of dogbane yarn, 2-ply or doubled. This likely took about 450 stalks of processed dogbane. As for the yvnvsh hishi, or bison wool, we needed 250 yards of 2-ply or double yarn. This ended up taking only about a third of the wool from one hide.
    [Show full text]