Hand Tools and Power Tool Accessories the C.H

Total Page:16

File Type:pdf, Size:1020Kb

Hand Tools and Power Tool Accessories the C.H Hand Tools and Power Tool Accessories THE C.H. HANSON STORY Headquartered near Chicago, Illinois, the C. H. Hanson Company has been a family-owned and managed operation since 1866. The company has demonstrated throughout its history, the ability to innovate both products and merchandising methods. C. H. Hanson is quick to respond to changing market needs with new products, new merchandising and new packaging. The company is strategically focused on significant product expansion through partnerships with the end-user to create tools that make job site tasks easier, faster, and safer. The C. H. Hanson Company offers more than 1,000 different products, both stock and custom, in more than 8 categories. We offer a complete line of mechanics and carpenters hand tools designed for use in the automotive, industrial, construction, safety, and hardware/DIY consumer markets. C.H. Hanson is the supplier of choice for businesses that prefer dealing with a single vendor, rather than with multiple vendors, who brings passion to the introduction of new products. Because Hanson has been a prime manufacturer for almost 150 years, they have earned the trust of many of the largest distributors. C.H. Hanson has a rich history, having experienced many important milestones over its lengthy history: 1866 - Founded in 1866 by Christian Henry Hanson, producing metal badges. 1876 - Stencils, rubber and metal stamps introduced, becoming the core range. 1927 - Patented stamped clip allowing license plates to easily attach to vehicles. 1944 - Patented world’s first tamperproof identification badge holder. 1997 - Launches barricade and safety flagging tape, is now the largest U.S. supplier 2005 - Moves headquarters to 100,000 sq. ft. facility in Naperville, Illinois. 2007- ChalkHog™ introduced, joining the chalk line reel to the chalk bottle. 2009 - Launches Automatic™ self-adjusting locking pliers, groove pliers, and clamps. 2013 - Launches the widest opening range of lightweight adjustable wrenches. 2016 - C.H. Hanson celebrates its 150th year anniversary. 4 TABLE OF CONTENTS 2 LOCKING PLIERS Standard, easy-release, and self-adjusting locking pliers & clamps 10 JOINTED PLIERS Groove joint pliers, cutting pliers, circlip pliers 18 WRENCHES Adjustable wrenches, pipe wrenches, ratcheting combination wrenches 24 OTHER HAND TOOLS Bolt cutters, wood chisels, hand riveters 26 METAL SNIPS Aviation snips, tinner snips 28 MARKING TOOLS Chalk line reels & bottled chalk refills 30 CARBIDE BURS Rotary carbide burs 34 SAW BLADES Carbide-tipped circular saw blades 36 ABRASIVE WHEELS Diamond wheels, cut-off wheels, flap discs 38 MASONRY DRILLS Carbide-tipped masonry & hammer drill bits 1 LOCKING PLIERS & CLAMPS Standard Locking Pliers & Clamps C.H. Hanson standard locking pliers are made to an exacting standard that results in improved durability and long-term performance. In fact, they meet stringent ASME standards B107.24 and B107.36, as applicable, for product specifications, including strength and maximum jaw opening capacity. Yet, as strong as they are, C.H. Hanson locking pliers still maintain the narrow profile required for work in tight and confined spaces. These tools have hundreds of uses; such as an adjustable wrench, pipe wrench, clamp, pliers, wire cutter, and portable vice. Every style has a tough nickel-plated finish for maximum resistance to corrosion. Locking Pliers MaxTorq™ Compound action for powerful Integral wire cutter on curved Nickel-plated finish resists adjustment non-slip locking grip jaw and long nose styles rust and corrosion screw (select models) Guarded release Induction hardened for secure locking jaw teeth for ultimate durability High-grade alloy steels heat treated for maximum toughness and durability Locking Pliers, Curved Jaw with Wire Cutter • Involute curved jaw allows tighter grip on objects • Built-in wire cutter cuts up to a 1/4” bolt • Maximum jaw opening per ASME specs • Nickel-plated finish resists rust and corrosion • Top quality design for superior performance • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 71050 10CJ 08183470150 Half Clam 10” 250mm 1-7/8” 48mm 6 30 70750 7CJ 08183470750 Half Clam 7” 175mm 1-5/8” 42mm 6 30 70550 5CJ 08183470550 Half Clam 5” 125mm 1-1/4” 32mm 6 30 70450 4CJ 08183470450 Half Clam 4” 100mm 15/16” 24mm 6 30 Locking Pliers, Curved Jaw with MaxTorq™ Screw • Involute curved jaw allows tighter grip on objects • MaxTorq™ adjustment screw for faster setup • Maximum jaw opening per ASME specs • Nickel-plated finish resists rust and corrosion • Top quality design for superior performance • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 71053 10CJ 08183471053 Half Clam 10” 250mm 1-7/8” 48mm 6 30 70743 7CJ 08183470753 Half Clam 7” 175mm 1-5/8” 42mm 6 30 2 LOCKING PLIERS & CLAMPS • Straight jaws allow for maximum contact in flat work Locking Pliers, Straight Jaw Locking Pliers • Very popular in welding and other metal work • Use for safer grinding or as a portable vice • Maximum jaw opening per ASME specs • Top quality design for superior performance • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 71000 10SJ 08183471000 Half Clam 10” 250mm 1-5/8” 41mm 6 30 70700 7SJ 08183470700 Half Clam 7” 175mm 1-1/8” 29mm 6 30 Locking Pliers, Straight Jaw with MaxTorq™ Screw • Straight jaws allow for maximum contact in flat work • MaxTorq™ adjustment screw for faster setup • Use for safer grinding or as a portable vice • Nickel-plated finish resists rust and corrosion • Maximum jaw opening per ASME specs • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 71003 10SJ 08183471003 Half Clam 10” 250mm 1-5/8” 41mm 6 30 70703 7SJ 08183470703 Half Clam 7” 175mm 1-1/8” 29mm 6 30 Locking Pliers, X-Treme™ Jaw • Patented jaw design provides three times gripping power • Maximum jaw opening per ASME specs • Nickel-plated finish resists rust and corrosion • Top quality design for superior performance • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 71060 10XJ 08183471060 Half Clam 10” 250mm 1-7/8” 48mm 6 30 70760 7XJ 08183470760 Half Clam 7” 175mm 1-5/8” 42mm 6 30 Locking Pliers, Long Nose with Wire Cutter • Long, straight nose allows for use in narrow spaces • Built-in wire cutter cuts up to a 1/4” bolt • Maximum jaw opening per ASME specs • Nickel-plated finish resists rust and corrosion • Top quality design for superior performance • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 70950 9NN 08183470950 Half Clam 9” 225mm 2-7/8” 73mm 6 30 70650 6NN 08183470650 Half Clam 6” 150mm 2-1/4” 57mm 6 30 70400 4NN 08183470400 Half Clam 4” 100mm 1-5/8” 41mm 6 30 3 LOCKING PLIERS & CLAMPS Locking Pinch-Off Tool • Specially designed for the refrigeration industry • Pinches off and locks on tubing instantly • Adjustment bolt allows for controlled pinch-off • Nickel-plated finish resists rust and corrosion • Top quality design for superior performance Locking Pliers • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 70970 9PO 08183470970 Half Clam 9” 225mm 1-5/16” 33mm 6 30 70770 7PO 08183470770 Half Clam 7” 175mm 1” 25mm 6 30 Locking Hose Clamp • For removing and installing flat band hose clamps • Waffle jaw pattern for better grip • Maximum jaw opening per ASME specs • Nickel-plated finish resists rust and corrosion • Top quality design for superior performance • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 70990 9HC 08183470990 Half Clam 9” 225mm 2-7/8” 73mm 6 30 70790 7HC 08183470790 Half Clam 7” 175mm 2-1/4” 57mm 6 30 Locking Sheet Metal Clamp • Makes bending, forming, and crimping jobs easier • Locks to sheet metal with powerful grip • Maximum jaw opening per ASME specs • Nickel-plated finish resists rust and corrosion • Top quality design for superior performance • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 70800 8SM 08183470800 Half Clam 8” 200mm 3-1/8” 78mm 6 30 Locking Welding Clamp • Holds work in proper alignment while welding • U-shaped jaws for visibility and working space • Maximum jaw opening per ASME specs • Nickel-plated finish resists rust and corrosion • Top quality design for superior performance • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S. federal specifications Length Jaw Opening Shelf Carton Item No. Model No. UPC No. Packaging Inch mm Inch mm Pack Pack 70900 9WD 08183470900 Half Clam 9” 225mm 1-5/8” 42mm 6 30 4 LOCKING PLIERS & CLAMPS Locking Chain Clamp Locking Pliers • 18” chain extension locks around any shape, any size • Adjusts quickly for ratchet action in either direction • Maximum jaw opening per ASME specs • Nickel-plated finish resists rust and corrosion • Top quality design for superior performance • Compound action for powerful non-slip locking grip • Fully meets or exceeds U.S.
Recommended publications
  • BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP
    2005 BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP. 2 Phone: 516 223-3868 • Fax: 516 868-6998 969 CHURCH STREET • BALDWIN, NY 11510 LISTING BY MANUFACTURER • AEARO • CELLO • GT WATER PRODUCTS PAGE 48 PAGE 61 PAGE 44 • ALL CRAFTS • CHANNELLOCK TOOLS • GENERAL TOOLS PAGE 57 PAGE 119 PAGE 133 • ALLWAY TOOLS • COLCO HVAC • GENERAL WIRE PAGE 111 FURNACE CEMENT PAGEW 45, 133 • AMERICAN SAW PAGE 77 • GILMOUR PAGE 140-145 • COLEMAN CABLE PAGE 64 • AMERICAN STONE MIX DROPLIGHTS/ • GLOWMASTER PAGES 44, 58, 60, 61 EXTENSIONS PAGE 133 • AMES PAGE 47 • GOJO PAGES 119 • CRESCENT PAGE 61 • ANSELL EDMONT PAGES 39, 137 • GREAT NECK PAGES 57 • DAP PAGES 109/113/121/129 • ARROW PAGES 32/33/54/55/59/109 135-139 PAGE 123 • DASCO • HAGSTROM MAPS • BACHARACH PAGES 14/40/42/44 PAGE 95 PAGES 66-69 • DIAMOND • HANSON • BAG SUPPLY INC. PAGE 43 PAGE 47 PAGES 85-87 • DIXON • HEXCRAFT • BALTIMORE TOOL PAGES 45, 95 PAGES 11, 13 PAGE 42,43 • DURACELL • HK PORTER • BAYCO PAGES 54, 55 PAGE 23 PAGES 44-47 • DURABOND • HUOT • BERKLEY TOOL PAGE 59 PAGE 19, 129 PAGES 15-17, 123, 139 • EKLIND • ICE MELT INC. • BERNZOMATIC PAGE 11 PAGE 121 PAGE 131 • ENDERES • IDEAL • BETA PAGE 119 PAGES 63, 65 PAGES 66-68, 70+71, 78-85 • ENERGIZER • IRWIN • BLACKJACK PAGES 55 PAGES 17/19/21/23/38 PAGE 39 • EVERHARD 43/135 • BLITZ PAGE 121 • ITW BUILDEX PAGE 55 • FAST ORANGE PAGE 119 • BONDHUS PAGE 61 • JAMERCO DRIVE PINS PAGE 11 • FIRE POWER PAGE 111 • BOSCH PAGE 131 • JANITORIAL INC.
    [Show full text]
  • A Woodworker's Wish List
    A Woodworker’s Wish List Brighten the holidays with these great gifts By Joe Hurst-Wajszczuk Having a woodworker on and accessories we wish your gift list is both a blessing we had bought sooner. The and a curse. While there is result is a selection suitable no shortage of new tools for woodworkers of all skill and accessories, the trick is levels. So if you’ve got family selecting items that will get members or friends who are used, rather than sit on a shelf. woodworkers, skip the ties, For inspiration, we collected socks, scarves, and cologne. Give gift-giving advice from fellow some gifts that keep on giving, woodworkers and added our now and for years to come. own insights about the tools Photos: Larry Hamel-Lambert Dec/Jan 2016 woodcraftmagazine.com 43 Marking & Measuring Go to the Buyer’s Guide on p. 66 for prices and ordering informati on for featured items. Super-stable square $40 Compared to a combinati on square, the Veritas Sliding Square’s 3"-wide blade provides a more substanti al reference face for transferring measurements. With the collar removed, the accurately machined blade is also useful as a fl at square. Tighter tolerances $42 The Wixey Dual Display Caliper Make your mark $15 simultaneously displays decimal The name’s a curve ball, but the and fracti onal measurements benefi ts go straight to the heart (to the nearest 64th of an of precise layout. The Pica-Dry inch). Adding a WoodRiver Pen is a mechanical pencil that Depth Gauge ($20) turns works on most surfaces, including any caliper into a super- wet wood, glass, and ti le.
    [Show full text]
  • Middle School Facility Education Specs
    Facility Summary Form Capital Improvement Planning Process Middle School Middle School Program Sioux Falls School District March 95 revised July 2002 Memorial Middle School Program Memorial Middle School Program Description of Area No Units Total Area Recommended Site Size Acceptable Range in Existing Facilities Site Middle School Site 1 20 1 as needed 5 - 10 acres additional when shared with city, do this whenever possible Academic Houses (9 Teams) Acceptable Range in Existing Facilities No Units Area/Unit (SF) Student/Unit Total Students No Units Area Classroom 27 800 30 810 9 houses/27 clsrms 30sf/student No Units Area/Unit (SF) Student/Unit Total Students Recommended Acceptable Range in Existing Facilities Floors: Carpet/Vinyl Base yes VCT Ceiling: 2 x 2 Lay-in Acoustical Tile yes well maintained existing 2 x 4 Fluorescent Fixtures (Two light level capability) yes well maintained existing AV pull down screen yes yes Walls: Painted Concrete Block yes well maintained existing 12' Marker Bd, with map rails and chalk tray (adjustable height) yes 12' min. chalk or tack 4' Tack Bd (adjustable height) 4' - 8' existing OK Pencil sharpener yes yes Casework: 6' Base cabinets w/ Plastic laminate countertop yes comparable storage units 6' Wall cabinets above countertop for classroom storage yes comparable storage units 3' Tall storage cabinet w/ 5 adjustable shelves yes comparable storage units Windows: Insulated double pane windows, aluminum yes well maintained existing Screens on operable units yes yes Window treatments: blinds yes replace with blinds as needed Technology: Intercom System/Phone yes yes Television with wall mounts rough ins only yes no 6 station computer mini lab area in classroom (tied to bldg.
    [Show full text]
  • ST. CHARLES ANTIQUE TOOL AUCTION September 22, 2012, 9:35 AM Harvester Lions Club 4835 Central School Rd
    5th Annual ST. CHARLES ANTIQUE TOOL AUCTION September 22, 2012, 9:35 AM Harvester Lions Club 4835 Central School Rd. St. Charles (St. Louis), Missouri 63304 (preview Friday from 2 to 6:30 PM & Saturday 6:30 to 9:30 AM) We have 550+ lots or more of quality antique tools including wooden and iron planes; saws; levels; layout tools; screwdrivers; boring tools; wrenches; leather tools; and several household antiques and kitchen collectibles. 001._____ Stanley #5 30-inch plumb & level with laminated stock, brass corners and top plates, decorative brass side views for level vial, SEPT 1867 patent date stamped into wood, very good overall. 002._____ Pair of Stanley levels: 28 5/16-inch Stanley #3 with brass end and top plates, both vials intact, very good overall; plus a 28-inch #3 SW logo, both vials intact, partial decal on top, very good overall. 003._____ Pair of levels: 28-inch Stanley #0, one corner chipped, otherwise intact and very good; plus a 26-inch Stratton Brothers No. 1 brass bound, numerous nicks and dings, both vials intact, with a good scraping, this one will be very good. 004._____ Pair of Stanley levels: 26-inch brass bound No. 21, both vials intact, very good overall; plus a 24-inch No. 3 SW logo, both vials intact, fine overall. 005._____ Ohio Tool Co. 03C iron smooth plane, fine iron marked OHIO TOOL THISTLE BRAND AUBURN NEW YORK, nice original tote and knob, very good overall. 006._____ Winchester #3091 iron block plane with screw operated blade adjuster, nice original WINCHESTER blade, very good overall.
    [Show full text]
  • Important School Information Enclosed School Starts September 7Th, 2021
    INDEPENDENT SCHOOL DISTRICT 309 Non-Profit Organization 301 Huntsinger Ave PARK RAPIDS, MN 56470 Park Rapids, MN 56470 IMPORTANT SCHOOL INFORMATION ENCLOSED SCHOOL STARTS SEPTEMBER 7TH, 2021 BACK TO SCHOOL 2021 Dear Park Rapids Area Parents, IN THIS ISSUE: Every year during this time, I become excited for the “beginning” of a new school year. When September 7th pops up on the calendar, school will be in session and In Person! Undoubtedly, most of us view the start of a new *Board of Education year, especially in these times, with a range of emotions. But one important *Activities Information thing to keep in mind is that the start of the school year is truly a new beginning for all, even in the time of Covid. *School Calendar As I reflect on the past year, and in anticipation of beginning a new, I am *Food Service Program truly excited about the direction of Park Rapids Area Schools. The vision *Health Department of the district to continually strive for innovation and creativity is ever changing the landscape of our educational opportunities and programs for *Transportation children. As forward thinkers we need to continue to focus on providing a *School Age Childcare/Century range of learning experiences that will challenge our children and Adventures ultimately prepare each one for the competitive and transformational world in which we live now, and into the future. *Community Education This Fall will bring challenges for all of us. The district and building level *Panther Prowl Store teams worked hard to put safe plans together for the return of students and *Asbestos & Pesticide & Indoor staff.
    [Show full text]
  • For Your Shop 2 3 Shop-Tested Benches, Racks, Organizers, and More
    ® WOOD MAGAZINE’ S Great Projects for Your Shop 2 3 Shop-tested benches, racks, organizers, and more... Right-angle router-table push pad p. 10 Proven plans by the editors of WOOD ® Supplement to WOOD Magazine woodmagazine.com 1 WOOD Magazine's Great Projects for Your Shop Contents 1 Mobile utility bench P.4 2 Folding assembly table 3 Multilayered lumber rack and sheet-goods holder 4 Rolling storage cart 5 Easy, attractive drill-bit cabinet 6 Benchtop sanding-disc caddy P.6 7 Built-to-fit sandpaper holder 8 Tablesaw tapering jig 9 Exact-width dado jig 10 Right-angle router-table push pad 11 Zero-clearance cutoff guide 12 At-the-ready router rest 13 Hang-and-go lathe-tool holder P.1 14 Easy-access router-bit storage 15 Round and ready drill-bit carousel 16 Workshop drawer organizer 17 Movable task-light support 18 Wall-hung tape dispensers P.10 19 Portable glue/towel center P.13 20 Edge-protecting chisel rack 20 pencil box with sharpener support 21 Handy hardware bin P.17 21 Hanging glue box ©Copyright Meredith Corporation 2010. All rights reserved. Great Projects for Your Shop Mobile utility bench The perfect size for smaller tasks, this handy bench rolls—and then stays— wherever you need it most. or a shop with limited space, or when you need some additional work- F surface for a project, this small bench fills the bill. With casters on one end only, you can easily move it like a wheelbarrow, yet the bench is rock-solid when lifted off the caster with the load leveler.
    [Show full text]
  • Versatile Vise
    Great Gear Versatile vise Whether cutting dovetails or trimming tenons, I’ve got a great setup for joinery work with the solid maple Moxon vise from Lake Erie Toolworks. As shown in the photo, the rear jaw extends beyond the movable front jaw to facilitate quick, solid clamping to your workbench. The vise screws turn smoothly, and their faceted handles make it easy to clamp workpieces securely. Depending on the project, I might clamp the vise to my workbench or assembly table to position the work right where it’s needed. But the portability doesn’t end there. The lightweight vise totes easily for working in different shops. My smaller “Lite” version (shown) accommodates 14"-wide boards. The full-sized version, available at Woodcraft, has a clamping capacity of 24". Lake Erie Toolworks Moxon Vise —Chad McClung, chief editor #427359, $219.99 60 Prices subject to change without notice. Photo: Doug Loyer Tips Great& Tricks Gear A square deal For cabinetry, furniture, and other projects, I often need a fast and reliable way to align and hold perfect 90° corners. These heavy aluminum 3D Squares are the perfect solution. Sold in pairs, the squares are small enough for assembling picture frames, and strong enough to brace large casework. The flanged design and 6" legs allow easy access for clamps. The four screw holes in each leg facilitate assembly for jigs and fixtures. —Tim Snyder, Newtown, CT Jevons 3D Squares (sold in pairs) #144041, $34.69 62 Prices subject to change without notice. Photo: Randy O’Rourke Tips Great& Tricks Gear Sharpening can be fun (really) No woodworker would argue against using sharp tools, but there are varying levels of commitment to getting the job done.
    [Show full text]
  • · Arrett Hack
    · �ARRETT HACK Photographs by John.S. Sheldon The HANDPLANE Book The HANDPLANE Book GARRETT HACK Photographs by John S. Sheldon TheTauntonrn Press TauntonBOOKS & VIDEOS forfellow enthusiasts © 1999 by The Taunton Press, Inc. All rights reserved. Printed in the United States of America 10 9 8 7 6 5 4 3 2 1 The Handplane Book was originally published in hardcover © 1997 by The Taunton Press, Inc. The Taunton Press, Inc., 63 South Main Street, PO Box 5506, Newtown, CT 06470-5506 e-mail: [email protected] Distributed by Publishers Group West. Library of Congress Cataloging-in-Publication Data Hack, Garrett. The handplane book / Garrett Hack. p. cm. "A Fine woodworking book" - T.p. verso. Includes bibliographical references and index. ISBN 1-56158-155-0 hardcover ISBN 1-56158-317-0 softcover 1. Planes (Hand tools). 2. Woodwork. I. Title. TT186.H33 1997 684'.082 - dc21 97-7943 CIP About Your Safety Working wood is inherently dangerous. Using hand or power tools improperly or ignoring standard safety practices can lead to permanent injury or even death. Don't try to perform operations you learn about here (or elsewhere) unless you're certain they are safe for you. If something about an operation doesn't feel right, don't do it. Look for another way. We want you to enjoy the craft, so please keep safety foremost in your mind whenever you're in the shop. To Helen and Vinny who saw the possibilities, Ned who encouraged me, and Hope who has kept me tuned and planing true ACKNOWLEDGMENTS No one can hope to bring together a book Helen Albert, for her insights and Noel Perrin, for his insights about all like this without help.
    [Show full text]
  • Section U - Hand Tools & Jigs
    Section U - Hand Tools & Jigs SECTION U - TABLE OF CONTENTS A Section U Contents: B Hammers/Nailsets...................................... 2 C Install and Cutting Tools.............................. 3 Utility Knives and Blades....................... 4 - 5 ↑ Utility Knives & Blades D Files → Razor Blades and Putty Knives................... 6 pages U-4 - U-5 pages Files and Accessories............................ 7 - 9 U-7 - U-9 EE Tape Measures..................................10 - 11 FF Marking and Measuring Tools.........11 - 13 Pressure Rollers → page U-32 Kreg Jigs and Accessories.................14 - 17 G Deco Hardware and Lighting Jigs.....18 - 19 3rd Hand Supports................................... 20 H Clamps...............................................21 - 27 Pinch Dogs and Toggle Clamps...............28 I Laminate and Edgebanding Tools....29 - 31 Pressure Rollers..........................................32 J Laminate & Edgebanding Tools → KK pages U-29 - U-31 L MM ← Tape Measures page U-10 - U-11 NN OO PP QQ R ↑ 3rd Hand page U-20 S T ↓ Clamps pages U-21 - U-27 ↑ U V WW XX Y ↑ Jigs (Pockethole, Hardware & Lighting) pages U-14 - U-19 800-289-2237 • WWW.WURTHBAERSUPPLY.COM • WÜRTH BAER SUPPLY U - 1 Section U - Hand Tools & Jigs A HAMMERS/NAIL SETS B Rubber Mallet C • Tough rubber head molded to a lacquered wooden handle • Rubber head helps minimize marring and surface damage D Item # Length Weight E ST57-522 13-1/4” 18 oz. F G Dead Blow Hammer • Uni-Cast™ construction of nonferrous materials eliminate sparking and won’t H absorb liquids • Dead-blow function uses steel shot to eliminate bounce back I Item # Length Weight J ST57-531 11-1/4” 18 oz. K Curve Claw Hammer L • Forged high-carbon steel head, fully heat-treated and polished bell face M • Hickory handle N Item # Length Weight ST51-616 13-1/4” 16 oz.
    [Show full text]
  • Trouble Shooting Guide & How to Replace Cutter And
    TROUBLE SHOOTING GUIDE & HOW TO REPLACE CUTTER AND GEARS OF JAKAR 5151 ELECTRIC PENCIL SHARPENER Although the original components have been factory fitted using special tooling no special skills are required to perform these basic tasks. Should you have any difficulties please do not hesitate to contact us for assistance. Your statutory rights remain unaffected. IMPORTANT ALWAYS DISCONNECT MACHINE FROM MAINS BEFORE ATTEMPTING ANY OF THE FOLLOWING TASKS. PLEASE PAY PARTICULAR ATTENTION TO STEP 3 REGARDING THE SMALL SPRING UNDER THE SECTION ‘REMOVING THE MOTOR’ POSSIBLE REASONS WHY YOUR MACHINE MAY HAVE STOPPED WORKING. 1. BROKEN SHAVING TRAY - Ensure that the small plastic ‘nib’ at the rear of the shaving tray is intact. This is a safety device without which the machine will not operate. If it breaks, replacement trays are available. 2. OVERHEATING -The machine has a built-in devise to prevent the motor from overheating. If, after continuous use within a relatively short period of time, the machine stops working, this is probably because the overheating device has been activated. Allow the machine to cool for at least 30 minutes after which the motor should re-set. 3. PIECE OF LEAD LODGED IN THE CUTTER AREA: Should a piece of lead breaks off from the tip of the pencil and becomes lodged in the cutter area this may cause the small metal ‘stop plate’ to the rear of the cutter to ‘think’ that a pencil is still inserted. The machine will therefore no longer turn. This is to prevent over sharpening. The piece of lead may not be visible until the motor is removed from the outer casing.
    [Show full text]
  • Field Camp Equipment
    EQUIPMENT REQUIRED/RECOMMENDED FOR SUMMER FIELD GEOLOGY PROVIDED BY SES IN UTAH FIELD CLOTHING •Brunton compass •Boots*: one new pair or two used pairs. Composition •Field notebook case (for your belt) soles preferred, Vibram best. •Clipboard •Broad-brimmed hat* •Stereoscope (for aerial photographs) •Work shirts and long pants* (not all shirts should be •Acid bottle short sleeved) •Basic first aid kit (band aids, antiseptic cream, aspirin •Jacket or windbreaker* etc.) •Sweatshirt/fleece jacket for cool weather in the mountains MUST PURCHASE FROM SES IN UTAH •Raincoat* or poncho (lightweight) •Field notebook (~$9) (Must be 5 x 7½; •Wool, poly or cotton work socks* (clean pair each 1 page 10 x 10 square grid) day is recommended) •Engineers scale (6"’ Flat; divisions 10, 20, 30, 50 inch) (~$6.50) OFFICE •Sand gauge (~$14.00) •Pencils: similar to those for field; one and a spare of each should suffice FIELD – MUST BRING WITH YOU •Colored pencils (set of 12 is a minimum, 18 is better) •Hammer* •Pigma Micron drawing pens*: 1 x 01, 02; •Hand lens (x10)* 2 x 005) •Pencils: 2H, 4H, HB, H * •Drafting tape* (removable; can be shared) •Protractor (at least 6" diameter) •Graph paper*: 1" grid, 0.1" subdivisions; blue line •Pencil sharpener (sandpaper block or sandpaper nail (Fade-out grid and normal grid) files) •Triangles with raised edges* •Pocket calculator (inexpensive type) •Small pencil sharpener •Marker pen (if you plan on collecting samples) •Paper: one pad of lined and one of unlined paper •Eraser (nonabrasive) •White out pens* •Pocket knife*
    [Show full text]
  • PENNY LOTS January-June 2012 Newsletter of the Bucks County Historical Society Vol
    PENNY LOTS January-June 2012 Newsletter of the Bucks County Historical Society Vol. 26 Number 1 What is the Fonthill’s 100th Anniversary: 1912 – 2012 here does the time go? Why it seems just like Meaning Wyesterday that it was 1912. Surely you of “Penny remember that year? It was the year the Titanic sank, New Mexico and Arizona became states, the Lots”? Girl Scouts of the USA are founded by Juliette In amassing his Gordon Low and Henry Chapman Mercer moved collection Henry Mer- into his new home, Fonthill. cer was known to Yes, it has been nearly 100 years since Henry scour the countryside Mercer wrote, “May 30, 1912 – Took my first meal in search of objects at Fonthill – Frank at lunch – Band playing in made obsolete by the cemetery – Decoration Day.” With Henry’s note in industrial era. In addi- tion to searching mind we will celebrate this anniversary throughout through barns and 2012. To celebrate the achievement, inspiration and garrets, he acquired imagination of Fonthill we will be holding special many artifacts sold programs and activities throughout the year. A as “penny lots” at special issue of Penny Lots will be devoted to local auctions. Our Fonthill’s 100th Anniversary. In addition keep newsletter’s name checking in with the BCHS website and Henry honors that tradition. Early view of Fonthill; note original spring house in Chapman Mercer Facebook page for updated foreground before Mercer transformed it. information and dates! The Aprons Are Coming – and Other Exhibits very full and diverse slate tecting treasure and the mod- coming! The exhibition, Aof exhibits is scheduled for ern treasure hunt.
    [Show full text]