DOCSLIB.ORG

Home Control Assistant Version 12 User Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Home Control Assistant Version 12 User Guide Home Control Assistant Version 12 User Guide WWW.HCATech.com The information contained in this document is subject to change without notice. Advanced Quonset Technology, Inc. provides this information “as is” without warranty of any kind, either expressed or implied, but not limited to the implied warranty of mechantability and fitness for a particular purpose. Advanced Quonset Technology, Inc. may improve or change the product at any time without further notice; this document does not represent a commitment on the part of Advanced Quonset Technology, Inc. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of the licensing agreement. Windows is a registered trademark, and Windows NT is a trademark of Microsoft Corporation. All other product names and services identified in this document are trademarks or registered trademarks of their respective companies and are used throughout this document in editorial fashion only and for the benefit of such companies. No such uses, or the use of any trade name, is intended to convey an endorsement or other affiliation with Advanced Quonset Technology, Inc. © 2001-2013 Advanced Quonset Technology, Inc. All rights reserved. Printed in the U.S.A. November 30, 2013 Chapter 1 What is the Home Control Assistant?............................................................................................................1 About this guide.........................................................................................................................................................1 Quick tour of HCA ....................................................................................................................................................2 Opening and Closing HCA ........................................................................................................................................2 Using the ribbon ........................................................................................................................................................3 The HINT System......................................................................................................................................................4 Using the properties dialog boxes..............................................................................................................................4 Home Properties dialog box ......................................................................................................................................5 HCA Options dialog box ...........................................................................................................................................6 The Design Pane and the Display Pane .....................................................................................................................7 The Design Pane........................................................................................................................................................7 Design Pane ...........................................................................................................................................................8 Two part names......................................................................................................................................................9 Working within the design pane ............................................................................................................................9 Design pane information......................................................................................................................................10 Working with the design and display panes together...........................................................................................10 What doesn’t appear in design pane ....................................................................................................................10 The conventions used in this guide ..........................................................................................................................10 Procedures and operations common to HCA...........................................................................................................11 Common Windows procedures used in HCA ..........................................................................................................12 Chapter 2 HCA Options...............................................................................................................................................13 About Options..........................................................................................................................................................14 Startup......................................................................................................................................................................15 Client-Server............................................................................................................................................................17 Hardware .................................................................................................................................................................17 Design Pane .............................................................................................................................................................18 Display Pane............................................................................................................................................................19 Color and Theme .....................................................................................................................................................19 Visual Programmer..................................................................................................................................................21 Web .........................................................................................................................................................................22 Clock........................................................................................................................................................................22 Advanced.................................................................................................................................................................25 Legacy .....................................................................................................................................................................25 Extra Features ..........................................................................................................................................................26 Chapter 3 Your Home..................................................................................................................................................27 Planning your home design......................................................................................................................................27 The Quick Start Wizard ...........................................................................................................................................28 The New Home Wizard ...........................................................................................................................................29 Modifying your home file........................................................................................................................................30 Security settings.......................................................................................................................................................31 Observations about the security system ...............................................................................................................32 Light and Dark.........................................................................................................................................................33 Home Info................................................................................................................................................................34 Chapter 4 Devices........................................................................................................................................................35 About devices ..........................................................................................................................................................35 Planning your devices..............................................................................................................................................35 Creating a new device..............................................................................................................................................36 Modifying an existing device...................................................................................................................................39 Triggers Tab ........................................................................................................................................................40 Restart Tab...........................................................................................................................................................41
Load more

Recommended publications
  • Use Style: Paper Title
    A SYSTEMATIC REVIEW ON SMART HOME TECHNOLOGY - CURRENT FEATURES AND FUTURE PERSPECTIVES Mrs. V ASHWINI Lecturer, Dept. of Management Studies, Bhavan’s Vivekananda College, Sainikpuri, Secunderabad. Telangana,India. Abstract: In this era of information Technology Internet has become a very crucial part of the peoples life . It is very hard for a day to start without the usage of the smart devices be it a smart phone or a wearable or any other related equipment . the usage of internet is increasing day by day as this interconnected network has made the life of the people more easier as they can access to anything from anywhere with one click. The world is moving towards The Internet of things which means the inter-networking of physical devices, vehicles also referred to as "connected devices" and "smart devices" buildings, and other items embedded with electronics, software, sensors, actuators, and network connectivity which enable these objects to collect and exchange data through Wi-Fi controlled Via Internet This Paper focuses on Smart Homes - Designing a home for the future it is also known as domotic which is a building automation for the home. The world is running at a very faster pace and people and running even more faster . The 24 hrs in the clock is not a sufficient time to do all the activities so the world is moving to something called as a smart home which involves the control and automation of lighting, thermostats, air ventilation, Ac's , and security, as well as home appliances . Wi-Fi is often used for remote monitoring and control.
    [Show full text]
  • Security Evaluation of the Z-Wave Wireless Protocol
    Security Evaluation of the Z-Wave Wireless Protocol Behrang Fouladi Sahand Ghanoun SensePost UK Ltd. [email protected] [email protected] Abstract — The Z-Wave wireless communication protocol has ZigBee protocol with regards to home automation. This is been widely used in home automation and wireless sensors partly due to interoperability of devices and shorter time to networks. Z-Wave is based on a proprietary design and a sole market on the vendor side. Another benefit is that it is less chip vendor. There have been a number of academic and subjected to signal interference compared to the ZigBee practical security researches on home automation systems based protocol, which operates on the widely populated 2.4 GHz on ZigBee and X10 protocols, however, no public vulnerability research on Z-Wave could be found prior to this work. band shared by both Bluetooth and Wi-Fi devices. The In this paper, we analyze the Z-Wave protocol stack layers and protocol specification and software development kit (SDK) [4] design a radio packet capture device and related software named are not open and only available to the device manufacturers Z-Force to intercept Z-Wave communications. This device (OEMs) who have signed an NDA with Sigma Designs. The enables us to decode different layers of the Z-Wave protocol and SDK costs between 1500 to 3500 US dollars and the NDA study the implementation of encryption and data origin prevents OEMs from disclosing the content of the SDK authentication in the application layer. We then present the publically. The aim of this research is to build a low cost Z- details of a vulnerability discovered using Z-Force tool in AES Wave packet capture and injection tool which facilitates the encrypted Z-Wave door locks that can be remotely exploited to security testing of home automation systems as well as aides unlock doors without the knowledge of the encryption keys.
    [Show full text]
  • Simon XT User Manual
    Simon XT User Manual P/N 466-2266 • REV F • OCT13 Copyright © 2012 UTC Fire & Security Americas Corporation, Inc. Interlogix is part of UTC Climate Controls & Security, a unit of United Technologies Corporation. All rights reserved. Disclaimer The information in this document is subject to change without notice. UTC Fire & Security, assumes no responsibility for inaccuracies or omissions and specifically disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a consequence, directly or indirectly, of the use or application of any of the contents of this document. For the latest documentation, contact your local supplier or visit us online at http://www.utcfireandsecurity.com/. This publication may contain examples of screen captures and reports used in daily operations. Examples may include fictitious names of individuals and companies. Any similarity to names and addresses of actual businesses or persons is entirely coincidental. Trademarks and Simon and Simon XT are trademarks of UTC Fire & Security. patents Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. Manufacturer UTC Fire & Security Americas Corporation, Inc. 1275 Red Fox Rd., Arden Hills, MN 55112-6943, USA Software license Important: This end-user license agreement (“Agreement”) is a legal agreement between UTC FIRE & agreement SECURITY and You. Read the follow ing terms and conditions carefully before installing or using this Software. This agreement provides a license from UTC FIRE & SECURITY to use the Software. It also contains warranty information, disclaimers, and liability limitations. Installing and/or using the Software confirms Your agreement to be bound by these terms and conditions.
    [Show full text]
  • Required Submission Information for Each Award
    I. Market Overview The network system protocols market closely follows the trends in home and building automation markets. Home and building controls can effectively be performed through wireless and powerline platforms. In addition, several manufacturers produce systems based on proprietary protocols. Any changes in the home or building automations markets have a direct impact on the market demand for these platforms. The residential segment forms a major portion of the application for these platforms, driven by a growing awareness about the benefits rendered through home automation. In 2005, revenues for the North American home automation market were estimated at $1,268.9 million and the market is expected to witness steady growth in the future. As a result of this, the protocols market is also experiencing healthy growth. Another crucial trend in this industry is the developing shift from proprietary platforms to open ones, which offers interoperability and more flexibility to end- users. The industry is also witnessed an increasing interest in wireless solutions, which in turn has driven the markets for radio frequency (RF) platforms. Although wireless solutions have been able to make some headway in the home automation market, some critics remain unconvinced of their effectiveness in terms of reliability. On the other hand, powerline communication offers more reliability and an extended reach. Hence, there is a need for simple and affordable protocol that can offer the benefits of both RF and powerline platforms. Moreover, the use of this open platform is likely to enable end-users to choose from a range of products, which is not feasible when using native or proprietary platforms.
    [Show full text]
  • Getting Started with HCA and X10
    Getting Started with HCA and X10 This Getting Started Guide continues from the previous “Getting Started with HCA – Installation and Introduction” which covers installing HCA and the basic operations available from the ribbon. This guide assumes that you have reviewed that. In this guide these topics are covered. • Connecting an X10 capable interface to HCA • Creating a new design file • Adding X10 devices using the HCA Designer • Controlling devices from the HCA user interface • Scheduling a device to come on at sunset • Responding to a button press on a keypad If you have not already purchased HCA and you are looking to test drive this software, you can download a free 30-day trial of HCA Plus from the HCA support website at www.HomeControlAssistant.com. Connecting the X10 interface to HCA Before HCA can control X10 devices in your home, you must connect an interface to your computer. There are several different interfaces that can send and receive X10 signals. We recommend that you use the Smart Home PowerLinc model 2413. The advantage of that interface is that it can send and receive both the older X10 signals and the newer Insteon signals. That lets you use your existing devices but add newer ones and be able to control both. Instructions for installing the 2413 PowerLinc can be found in the Getting Started with HCA and Insteon guide. You can also use the older CM11 and CM15 interfaces. The CM11 is a serial interface and can be connected to the computer and the communications port it uses is specified in the HCA hardware setup.
    [Show full text]
  • Appendix 8 Universal Powerline Bus (UPB)
    Appendix 8 Universal Powerline Bus (UPB) This appendix describes the features in HCA in support of the UPB technology and products available from Powerline Control Systems (PCS), Simply Automated Inc, and other manufacturers. These topics are covered • What is UPB? • UPB device setup and configuration • Powerline Interface Module (PIM) • Network import • Generic UPB devices • Device properties • HCA support for scenes and device command features • Program triggers for UPB events • Hints and tips What is UPB? UPB is a powerline carrier technology created by Powerline Control Systems (PCS). It allows commands to sent over the powerline wiring in your home. Signals generated by a UPB transmitter, for example a keypad, can be received by the computer. HCA can also “listen in on” the communication between UPB devices and act on that communication, or simply log the activity. To use HCA with UPB devices and keypads you need the UPB Powerline Interface Module (PIM). This interface lets HCA send and receive UPB messages using the powerline. HCA supports both the serial and USB version of the PIM. If you are familiar with X10 devices (like the SceneMaster product line also from PCS) and the features in HCA to support them, you will be able to use UPB devices without much change to your thinking. Support for keypads is a bit different and is covered later in this appendix. If you are unfamiliar with the features of HCA for creating an automation solution, we suggest you review the other sections in of the HCA User Guide. UPB device setup and configuration UPB devices are highly configurable but HCA does not provide configuration facilities.
    [Show full text]
  • Bachelor Thesis Powerline in Building Automation
    Bachelor thesis Powerline in Building Automation J¨urgenMaier MatrNr.: 0825749 Stud.Kennzahl: 033 535 mail: [email protected] September 24, 2011 1 Erkl¨arungzur Verfassung der Arbeit J¨urgenMaier Eschenweg 1, 2223 Martinsdorf Hiermit erkl¨areich, dass ich diese Arbeit selbst¨andigverfasst habe, dass ich die verwendeten Quellen und Hilfsmittel vollst¨andigangegeben habe und dass ich die Stellen der Arbeit - einschließlich Tabellen, Karten und Abbildungen -, die anderen Werken oder dem Internet im Wortlaut oder dem Sinn nach ent- nommen sind, auf jeden Fall unter Angabe der Quelle als Entlehnung kenntlich gemacht habe. (Ort, Datum) (Unterschrift Verfasser) 2 Contents 1 Abstract 4 2 Powerline in Building Automation 5 2.1 Home and Building Automation . 5 2.2 Powerline Communication . 6 2.2.1 Description . 6 2.2.2 Motivation for PLC . 7 2.2.3 Problems with PLC . 8 2.2.4 Security . 9 3 Current Communication Protocols 11 3.1 LonTalk . 11 3.1.1 Protocol . 11 3.1.2 Powerline . 16 3.2 KNX Powernet . 18 3.2.1 Protocol . 18 3.2.2 Powerline . 19 3.3 X10 . 21 3.3.1 Protocol . 21 3.3.2 Powerline . 22 3.4 Universal Powerline Bus - UPB . 24 3.4.1 Protocol . 24 3.4.2 Powerline . 25 3.5 Industrial Powerline Communications - IPC . 27 3.5.1 Protocol . 27 3.5.2 Powerline . 27 3.6 Consumer Electronic Bus - CEBus . 28 3.6.1 Protocol . 28 3.6.2 Powerline . 30 3.7 digitalSTROM . 33 3.7.1 Protocol . 33 3.7.2 Powerline . 35 4 Solutions on the market 36 4.1 Comparison .
    [Show full text]
  • X10 Debugging Tips
    X10 DEBUGGING TIPS INTRODUCTION Although X10 powerline communications provides many great benefits, one of its biggest downsides is the potential reliability problems. In fact, the most frequent questions we receive from HomeVision users are about X10 problems in their homes. Over the years we’ve learned some good ways to help isolate these problems. We hope that these tips will help if you run into X10 problems, even if you’re using a different home automation system. Problems can generally be grouped into two categories: 1. Major problems: X10 never works 2. Intermittent problems: X10 sometimes works There are many possible things that can cause such X10 problems. We will discuss troubleshooting the major problems, then address the much more common intermittent X10 problems. SOLVING MAJOR X10 PROBLEMS Let’s start with the worst-case scenario: HomeVision is neither sending nor receiving X10 commands. In this situation, the problem lies in one of four places: 1. The HomeVision controller. 2. The X10 powerline interface device. This is usually a TW-523 or PSC05, although there are others. We’ll refer to all of them as “TW-523” in this article. 3. The cable connecting the HomeVision controller to the TW-523. 4. A serious X10 signal degradation problem in your home. So how do we troubleshoot these? Here goes … Check the TW-523 Module LED First, verify that the red LED on the TW-523 module is lit. If not, make sure it’s plugged into a live circuit. If the LED is still not lit, then the TW-523 is defective.
    [Show full text]
  • Appendix 1: Versions and Features 1 | Page Protocol Description Limited
    Appendix 1: Versions and Features Protocol Description Limited Standard Plus Smart-Home Insteon All Insteon devices from SmartHome, including switches, modules, thermostat, irrigation controller, sensors, and others are supported. The Insteon 2413 Model PowerLinc X X required for Insteon support. More information is in the User Guide Insteon appendix. Powerline Control All UPB Devices from PulseWorx, Simply Automated, and Systems UPB Web Mountain, and others are supported. More X information is in the User Guide UPB appendix. Global Cache IR All GC-100 models and iTach units are supported. Up to four IR Interfaces can operate with HCA simultaneously. X X More information is in the User Guide IR appendix. Phillips Hue Complete support for Philips Hue color light bulbs using the Phillips Bridge. More information is in the User Guide X Phillips Hue appendix. TP-Link Support for TP-Link Smart Wi-Fi plugs and Smart Wi-Fi light X bulbs. More information is in the TP-Link tech note. LIFX Lighting Support for the LIFX color changing lighting products. More X products information is in the LIFX tech note. Samsung Integration with Samsung SmartThings cloud. Devices that SmartThings are managed by the SmartThings hub can be integrated with HCA for control using a library package. This includes X X ZWave and Zigbee devices. More information is in the SmartThings tech note. Hubitat Elevation Integration with Hubitat Elevation hub. Devices that are managed by the Hubitat hub can be integrated with HCA for local control using a library package. This includes X X ZWave and Zigbee devices. More information is in the Hubitat Tech Note.
    [Show full text]
  • Power Line Communication Systems
    ISSN (Online) 2321 – 2004 ISSN (Print) 2321 – 5526 INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN ELECTRICAL, ELECTRONICS, INSTRUMENTATION AND CONTROL ENGINEERING Vol. 2, Issue 1, January 2014 Power Line Communication Systems Vivek Akarte1, Nitin Punse2, Ankush Dhanorkar3 PG Student, Electronics and Telecommunication Engineering, G. H. Raisoni College of Engineering & Management, Amravati, India 1 PG Student, Electronics and Telecommunication Engineering, Padm, Dr. V.B. Kolte college of Engineering, Malkapur, India 2 PG Student, Electrical and Electronics Engineering, Prof. Ram Meghe College of Engineering. & Management, Badnera, India3 Abstract— This article constitutes an overview of the research, application, and regulatory activities on power line communications. Transmission issues on the power line are investigated and modeling approaches illustrated. Contemporary communication techniques and reliability issues are treated. Power lines constitute a rather hostile medium for data transmission. Varying impedance, considerable noise, and high attenuation are the main issues. The power line communication (PLC) is a new technology open to improvements in some key aspects. Some companies in the world provide broad band PLC devices and an increasing number of utility companies have already gone through field trials and commercial deployment of PLC services. Power-line communications over the low-voltage networks is gaining the attention of researchers in both broadband and narrowband application areas. The transmission characteristics of the power- line carrier are very significant in signal propagation. The power line modem uses the power line cable as communication medium. It is convenient as it eliminates the need to lay additional cables. The modem at the transmission end modulates the signal from data terminal through RS-232 interface onto the carrier signal in the power line.
    [Show full text]
  • SMART AUTOMATION SYSTEM BASED on WIRELESS and Iot
    Vol-3 Issue-2 2017 IJARIIE-ISSN(O)-2395-4396 SMART AUTOMATION SYSTEM BASED ON WIRELESS AND IoT Miss.Chetashri Prakash Purandare 1, Prof. D. D. Patil 2 1 Third Year Engineering Student, Department of Computer Science & Engineering, Hindi Seva Mandal’s, Shri Sant Gadge Baba College of Engineering & Technology, Bhusawal - 425203, Dist. – Jalgaon, Maharashtra, India. 2 Associate Professor & Head, Department of Computer Science & Engineering, Hindi Seva Mandal’s, Shri Sant Gadge Baba College of Engineering & Technology, Bhusawal - 425203, Dist. – Jalgaon, Maharashtra, India y ABSTRACT Today technologies have changed every aspect of comfort & luxury. Our residential solutions for lighting, safety, audio and video, energy management reflects the superiority in terms of next generation technology which offers safety and comfort. Smart Automation will help you in realizing your dreams and imagination with the help of wireless technologies. The purpose of home automation system using internet and wireless networks is to control the parameters like voltage, current and temperature and monitor it. It helps to improve the performance of control network. IoT (Internet of Things) is fast rising technology which involves interaction among object (things) through internet without human interference. The main objective of using smart automation based on wireless and IoT is to reduce the unnecessary energy consumption of smart home. Keyword: - Smart automation, Internet of Things (IoT), Wireless, Energy control, Sensors, Smart living. 1. INTRODUCTION In the past decade, due to the increase in high speed communication networks and increased Internet use, interest in the smart home has grown. The concept of smart home is the environment where information technologies are being employed to assist and support people everyday activities [2].
    [Show full text]
  • Smart Assistants for Smart Homes
    Smart assistants for smart homes KATHARINA RASCH Doctoral Thesis in Electronic and Computer Systems Stockholm, Sweden 2013 TRITA-ICT/ECS AVH 13:16 KTH School of Information and 1653-6363 Communication Technology KTH/ICT/ECS/AVH-13/16-SE SE 164-40 Kista 978-91-7501-837-9 SWEDEN Akademisk avhandling som med tillstånd av Kungliga Tekniska Högskolan framlägges till offentlig granskning för avläggande av teknologie doktorsexamen i elektronik och datorsystem den 11 Oktober 2013 klockan 13 i Sal E, Forum Isafjordsgatan 39, Kista, Kungliga Tekniska Högskolan. © Katharina Rasch, September 2013 Tryck: Universitetsservice US AB iii Abstract The smarter homes of tomorrow promise to increase comfort, aid elderly and disabled people, and help inhabitants save energy. Unfortunately, smart homes today are far from this vision – people who already live in such a home struggle with complicated user interfaces, inflexible home configurations, and difficult installation procedures. Under these circumstances, smart homes are not ready for mass adoption. This dissertation addresses these issues by proposing two smart assistants for smart homes. The first assistant is a recommender system that suggests useful services (i.e actions that the home can perform for the user). The recommended services are fitted to the user’s current situation, habits, and preferences. With these recommendations it is possible to build much simpler user interfaces that highlight the most interesting choices currently available. Configuration becomes much more flexible: since the recommender system automatically learns user habits, user routines no longer have to be manually described. Evaluations with two smart home datasets show that the correct service is included in the top five recommendations in 90% of all cases.
    [Show full text]