DOCSLIB.ORG

Operating Instructions for 4-Function Cable Remote Control

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Operating Instructions for 4-Function Cable Remote Control 1 Introduction 4 Button Functions A. Quick Set-Up Method STEP3 Point the remote control toward the E. Finding a Component Button’s STEP1 Press the [CBL] button. Component and enter the 3-digit code Setup Code Number Operating Instructions STEP1 Turn on the component you want to program. number assigned to your brand. STEP2 Press the [SYSTEM ON/OFF] button and the [OK/SEL] button simultaneously for 3 seconds. This remote control is designed to operate all To program your TV, turn on the TV. If you used the Auto-Search Method to program a Motorola and Scientific Atlanta digital set top *Note : If the 3-digit code number you just entered The [CBL] Component LED will light for 30 For 4-Function STEP2 Point the remote control at the component. Component, you may not know what the correct code boxes (including HD and DVR), plus the G is correct, the Component will turn Off. If seconds. majority of TVs, VCRs, DVDs and AUDIO STEP3 Press and hold the [DEVICE] key for 5 it did not turn Off, continue entering code number is. Here is a way for you to identify the code numbers listed for that brand until the number, so you can record it for future reference. STEP3 Press the first [COMPONENT] button you want Cable Remote Control equipment on the market as shown below. seconds until the Device LED will blink to store in the [SYSTEM ON/OFF] button and once and stays on. Continue to hold the Component turns Off. CABLE : Cable Converters TV : Televisions STEP1 Press the [COMPONENT] button (TV, DVD or then the [POWER] button. Repeat this for [DEVICE] key and press the number key STEP4 After you’ve entered the correct code AUX) you want to verify and the [OK/SEL] button DVD : DVDs, TV/DVDs, VCRs and TV/VCRs assigned to your brand in the Quick Set-up other Components until you have stored all the number and the Component has turned simultaneously for 3 seconds. The Component desired power commands into the [SYSTEM AUX : Audio Receivers and DVRs, etc. Code Table. The component should turn LED will light for 30 seconds. UR4U-MDVR2 off as soon as the number key is pressed. Off, press the [POWER] button to turn the ON/OFF] button. Component back On. Now it’s time to test (If it does not turn off, release the [DEVICE] STEP2 Press the [INFO] button and count the number 5 2 Replacing Batteries key and use the Pre-Programmed 3-Digit the VOLUME and MUTE buttons for the of times the Component LED light blinks. This STEP4 Press the [CH ] button to save the power code Method or Scanning Method.) TV (or PLAY and STOP buttons for VCR number indicates the first digit of the code, commands you stored. The [CBL] button will Before you program or operate this remote and DVD) to make sure they all work. If followed by the second and third, each blink twice to confirm the commands have STEP4 Release the [DEVICE] key to save the code. any of the functions do not work as they been saved. control, you must first install two new AA Alkaline The Device LED will blink twice to confirm separated by a one second pause when the batteries. that the code is stored. should, repeat from STEP 3 using the next LED will turn off. 3-digit code number listed for that brand. H. Programming Channel Control STEP1 Remove the battery compartment cover Repeat the steps above for all components (TV, *Note : 10 blinks represents the number zero. on the back of your remote control. DVD, AUX). STEP5 Once you have found the correct 3-digit Example : One blink, (pause), eight blinks, (pause) and You can program the channel controls (Channel Up, code, save it by pressing the same three blinks, indicates code number 183. Channel Down, Last and Numbers) from one Component STEP2 Check battery polarity carefully, and [COMPONENT] button one more time. install the batteries as shown in the B. Quick Set-up Code Tables to operate in another Component mode. Default channel The Component LED light will blink twice th control settings on the remote control are as follows: illustration below. TV to confirm that the code was successfully F. AUX Function: Programming a 4 STEP3 Replace the battery compartment cover. Quick Number Manufacturer/Brand stored. Component CBL : CBL T V : CBL 0 SANYO DVD :DVD AUX :AUX 1 SONY Now, program the rest of your Components by You can take advantage of the AUX function to program 2 SAMSUNG a 4th Component such as a second TV, VCR, DVD or If you wish to operate the TV channel control in TV 3 LG repeating STEPS 1-5. 4 TOSHIBA Audio Component. mode, use the following steps. 5 PANASONIC *Note : If the Pre-Programmed Method did not 6 PHILIPS STEP1 Turn on the 4th Component you want to 7 HITACHI work, or if the Code Tables do not list STEP1 Press the [TV] button and the [OK/SEL] button 8 SHARP program (TV, VCR, DVD or Audio). 9 VIZIO your Component brand, use the Auto- simultaneously for 3 seconds. The [TV] STEP2 Press the [AUX] button and the [OK/SEL] Component LED will light for 30 seconds. DVD Search Method as explained in Section D. button simultaneously for 3 seconds.The 6 Quick Number Manufacturer/Brand [AUX] Component LED will light for 30 STEP2 Press the [VOL ] button. 0 HITACHI D. Auto-Search Method seconds. 1 SONY STEP3 Press the [TV] button again. 2 PHILIPS STEP1 Turn on the Component you want to The Component LED will blink twice to confirm 3 SAMSUNG STEP3 Press the [COMPONENT] button you want to 4 PHILIPS MAGNAVOX program (TV, VCR, DVD or AUX). setup. Point the remote control toward the the programming. 5 PANASONIC 6 LG STEP2 Press the [COMPONENT] button (TV, DVD Component and enter the 3-digit code number 7 JVC To return to original state: 8 DENON or AUX) to be programmed and [OK/SEL] assigned to your brand. 9 PIONEER button simultaneously for 3 seconds. The If you wish to restore the CABLE channel control in Component LED will light for 30 seconds *Note : If the 3-digit code number you just entered is TV mode, repeat the above steps but press [CBL] AUX the correct number, the Component will turn in 5 Quick Number Manufacturer/Brand indicating the unit is ready to be STEP3. Programming the Remote Control programmed. Off. If it did not turn Off, continue entering 0 BOSE code numbers listed for that brand until the 1 HP There are three ways you can program your remote control: 2 APPLE/iPod STEP3 Point the remote toward the Component Component turns Off I. Programming Volume Control 3 Operations 3 APPLE/iPod and press the [CH5] or [CH6] button * Quick Set-Up Method 4 MICROSOFT / XBOX STEP4 Test functions. (Same as for 3-Digit Code You can program the volume controls (Volume Up, 5 SONY / PS2 one step at a time or keep it pressed. The * The Pre-Programmed 3-Digit Code Method 6 LUTRON remote will emit a series of ON/OFF Programming Method - Section C). If any of Volume Down and Mute) from one Component to DEFAULT STATUS: The Auto-Search Method 7 X-10 * 8 ZINWELL commands. Release the [CH5] or [CH6] the functions do not work as they should, you operate in another Component mode. Default volume Component Default: CABLE The Quick Set-Up Method is a unique new feature that enables the fastest and easiest set-up by using 9 MICROSOFT / XBOX button as soon as the Component turns need to find a new code. control settings on the remote control are as follows: Channel Default: CABLE channel +/- and one-digit codes for up to 10 major brands for each component. Off. STEP5 Once you have found the correct 3-digit code, CBL :TV T V :TV numbers operate through the CABLE box. save it by pressing the [AUX] button one more The Pre-Programmed Code Method allows you to setup all the buttons at once by entering 3-digit code C. Pre-Programmed 3-Digit Code STEP4 Test functions. (Same as for 3-Digit Code DVD :TV AUX :AUX You have the option of controlling channel +/- and numbers that correspond to a particular Component’s manufacturer/brand, so it’s the fastest and Method Programming Method - Section C). If any of time. The Component LED light will blink twice numbers through the TV, VCR or DVD. Refer easiest of the two methods. (Code Tables are on the backside of this Instruction Sheet.) The Auto- the functions do not work as they should, to confirm the code was stored. Now when If you wish to operate the CBL volume control in CBL Search Method scans through all the codes in the remote control, one at a time. STEP1 Turn on the Component you want to repeat from STEP 3 using [CH5] or [CH6] you press the AUX button, all the buttons will mode, use the following steps. to section H for programming steps. program (TV, VCR, DVD or AUX). buttons to find the correct code. work with that 4th Component. STEP1 Press the [CBL] button and the [OK/SEL] Volume Default: CABLE volume +/- and mute IMPORTANT SETUP NOTES: Press the [COMPONENT] button (TV, DVD STEP2 STEP5 Save the code. (Same as for 3-Digit Code button simultaneously for 3 seconds. The operate through the TV. You have the option or AUX) to be programmed and [OK/SEL] G.
Load more

Recommended publications
  • Universal Remote Owner's Manual Lionel Lionchief
    78-3071-250 11/19 LionelLionel LionChieLionChieff ®® UniversalUniversal RemoteRemote Owner’sOwner’s ManualManual Thank You! hank you for your purchase of the LionChief Universal Remote! This Tremote is designed to allow you to control up to 3 separate LionChief and/or LionChief Plus locomotives under one remote. This Universal Remote is equipped with both RF as well as Bluetooth®, which makes it compatible with most all existing LionChief and LionChief Plus locomo- tives released up to 2016 as well as all LionChief and LionChief Plus loco- motives released in 2017 and beyond! This remote will also control any Bluetooth-equipped Legacy locomotive! The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Lionel is under license. Other trademarks and trade names are those of their respective owners. The following Lionel marks are used throughout this Owner’s Manual and are protected under law. All rights reserved. Lionel®, LionChief™, LionChief Plus™, FlyerChief™, TMCC®, LEGACY®, RailSounds®, ElectroCoupler™, CAB- 1® Remote Controller, American Flyer®, TMCC® 2 LionChief® Remote control The LionChief remote control is used to operate the locomotive. Easy to use, and with many enhanced features including a wider range of realistic sounds, such as chuff sounds and three buttons on the control to activate user-controllable announcements and engine sounds. Long-distance con- trol and multi-engine operation on one layout are in your grasp with the LionChief remote control system. LionChief® Plus Remote Control Using the same remote system of the basic LionChief, LionChief Plus locomotives feature everything described in basic LionChief, PLUS many additional hi-tech features that increase the realism of your oper- ations.
    [Show full text]
  • Remote Control Code List
    Remote Control Code List MDB1.3_01 Contents English . 3 Čeština . 4 Deutsch . 5 Suomi . 6 Italiano . 7. Nederlands . 8 Русский . .9 Slovenčina . 10 Svenska . 11 TV Code List . 12 DVD Code List . 25 VCR Code List . 31 Audio & AUX Code List . 36 2 English Remote Control Code List Using the Universal Remote Control 1. Select the mode(PVR, TV, DVD, AUDIO) you want to set by pressing the corresponding button on the remote control. The button will blink once. 2. Keep pressing the button for 3 seconds until the button lights on. 3. Enter the 3-digit code. Every time a number is entered, the button will blink. When the third digit is entered, the button will blink twice. 4. If a valid 3-digit code is entered, the product will power off. 5. Press the OK button and the mode button will blink three times. The setup is complete. 6. If the product does not power off, repeat the instruction from 3 to 5. Note: • When no code is entered for one minute the universal setting mode will switch to normal mode. • Try several setting codes and select the code that has the most functions. 3 Čeština Seznam ovládacích kódů dálkového ovladače Používání univerzálního dálkového ovladače 1. Vyberte režim (PVR, TV, DVD, AUDIO), který chcete nastavit, stisknutím odpovídajícího tlačítka na dálkovém ovladači. Tlačítko jednou blikne. 2. Stiskněte tlačítko na 3 sekundy, dokud se nerozsvítí. 3. Zadejte třímístný kód. Při každém zadání čísla tlačítko blikne. Po zadání třetího čísla tlačítko blikne dvakrát. 4. Po zadání platného třímístného kódu se přístroj vypne.
    [Show full text]
  • Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 1
    Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 1 ATLAS DVR/PVR 5-DEVICE Universal Remote Control User’s Guide Atlas DVD/PVR Manual 2/14/03 5:00 PM Page 2 TABLE OF CONTENTS Introduction. 3 Features And Functions. 4 Key Charts . 5 Device Table. 8 Installing Batteries . 9 Programming Device Control . 10 Programming TV/VCR Combo Control. 12 Manufacturer’s Codes . 13 Setup Codes For Audio Amplifiers. 13 Setup Codes For Audio Receivers . 13 Setup Codes For Cable Boxes (Converters) . 15 Setup Codes For DVD Players . 15 Setup Codes For Satellite Receivers . 16 Setup Codes For TVs. 17 Setup Codes For TV/VCR Combos . 20 Setup Codes For VCRs And PVRs . 21 Searching For Your Code . 24 Checking The Codes . 25 Programming Channel Control Lock . 26 To De-Activate Channel Control Lock . 26 To Re-Activate Channel Control Lock . 26 Programming ID Lock . 27 Programming“Tune-In” Keys For Specific Channels . 27 To Program A “Tune-In” Key . 28 To Clear A “Tune-In” Key. 28 Using The Master Power Key. 29 To Program The Master Power Key. 29 To Operate The Master Power Key . 29 To Clear The Master Power Key . 29 Re-Assigning Device Keys . 30 Changing Volume Lock . 31 To Unlock Volume Control For A Single Device (Individual Volume Unlock). 31 To Unlock All Volume Control (Global Volume Unlock). 31 To Lock Volume Control To One Mode (Global Volume Lock) . 32 Troubleshooting . 33 Instructions To The User . 34 Additional Information. 35 2 Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 3 INTRODUCTION The Atlas DVR/PVR 5-Device Universal Remote Control by Universal Electronics
    [Show full text]
  • Universal Remote Code Book
    Universal Remote Code Book www.hestia-france.com TV CENTURION 0051 0169 CENTURY 0000 A CGE 0129 0047 0131 0043 ACER 1484 CIMLINE 0009 0028 ACME 0013 CITY 0009 ADA 0008 CLARIVOX 0169 0037 ADC 0012 0008 CLATRONIC 0009 0011 0051 0002 0083 ADMIRAL 0019 0108 0002 0001 0047 0003 0129 0030 0043 0000 COMBITECH 0248 ADYSON 0003 CONCORDE 0009 AGAZI 0002 CONDOR 0198 0051 0083 0003 0245 AGB 0123 CONRAC 0038 1395 AIKO 0003 0009 0004 CONTEC 0003 0009 0027 0030 0029 AIWA 0184 0248 0291 CONTINENTAL EDISON 0022 0111 0036 0045 0126 AKAI 1410 0011 0086 0009 0068 0139 0046 0004 0006 0008 0051 0061 COSMEL 0009 0088 0169 0200 0133 0141 CPRTEC 0156 0069 CROSLEY 0129 0131 0000 0043 AKIBA 0011 CROWN 0009 0169 0083 0047 0051 AKURA 0169 0074 0002 0009 0011 0245 0121 0043 0071 CS ELECTRONICS 0011 0129 0003 ALBA 0028 0027 0009 0011 0003 CTC 0129 0068 0083 0169 0047 0245 CTC CLATRONIC 0014 0248 0162 0062 CYBERCOM 0177 0038 0171 0002 0009 ALBIRAL 0037 0206 0205 0207 0208 0210 ALKOS 0164 0169 0042 0044 0127 0047 ALLORGAN 0157 0026 0061 0063 0067 0068 0103 ALLSTAR 0051 0107 0115 0154 0168 0185 ALTUS 0042 0228 0209 0343 0924 0933 AMPLIVISION 0003 0248 0291 AMSTRAD 0011 0009 0068 0074 0002 CYBERMAXX 0177 0038 0171 0002 0009 0108 0071 0069 0030 0123 0206 0200 0205 0207 0208 0013 0210 0211 0169 0015 0042 ANAM 0009 0065 0109 0044 0047 0048 0049 0061 ANGLO 0009 0063 0067 0068 0087 0103 ANITECH 0009 0002 0043 0109 0107 0115 0127 0154 0155 ANSONIC 0009 0014 0168 0170 0185 0228 0229 AOC 0134 0209 0218 1005 0894 0343 ARC EN CIEL 0126 0045 0139 0924 0933 0248 0291 ARCAM 0003 CYBERTRON
    [Show full text]
  • Equipment Setup and Self-Installation Programming Your WOW! Atlas Universal Remote Control
    table of contents WOW! equipment setup and self-installation Programming Your WOW! Atlas Universal Remote Control ...........................................................E-1 Programming Channel Control Lock ......................................................................................................E-3 Programming ID Lock ..................................................................................................................................E-3 Programming “Tune-In” Keys For Specific Channels ........................................................................E-4 table of contents Using The Master Power Key ....................................................................................................................E-4 Re-Assigning Device Keys ..........................................................................................................................E-5 Changing Volume Lock ...............................................................................................................................E-5 Atlas Cable Remote Control Codes ........................................................................................................E-7 Digital Cable Self-Installation ..................................................................................................................E-13 Advanced Digital Equipment Setup .....................................................................................................E-16 Connecting a Non-Stereo TV .............................................................................................................E-16
    [Show full text]
  • Universal Remote Control for Smartphones Development of a Communication Station Master of Science Thesis in the Master Degree Program, Product Development
    Universal Remote Control for Smartphones Development of a communication station Master of Science Thesis in the Master Degree Program, Product Development ANDERS GÖRANSON CHRIS NILSSON Department of Product and Production Development Division of Product Development CHALMERS UNIVERSITY OF TECHNOLOGY Göteborg, Sweden, 2011 Universal Remote Control for Smartphones Development of a communication station ANDERS GÖRANSON CHRIS NILSSON Department of Product and Production Development CHALMERS UNIVERSITY OF TECHNOLOGY Göteborg, Sweden 2011 Universal Remote Control for Smartphones Development of a communication station ANDERS GÖRANSON CHRIS NILSSON © ANDERS GÖRANSON, CHRIS NILSSON 2011 Department of Product and Production Development Chalmers University of Technology SE-412 96 Göteborg Sweden Telephone + 46 (0)31-772 1000 Cover: The images on the cover show the four promising design concepts for the intended product. More information about the concepts can be found in section 5.2.1. The report is printed by Chalmers Reproservice Göteborg, Sweden 2011 Universal Remote Control for Smartphones Development of a communication station ANDERS GÖRANSON CHRIS NILSSON Department of Product and Production Development Chalmers University of Technology ABSTRACT This master thesis report describes the concept of a universal remote control for smartphones, with a focus on the development of a communication station with hardware needed in order for such a product to function as intended. The development starts with a “blank canvas”, and the resulting product functionality and design is based on an extensive market analysis conducted at the start of the project, including an analysis of current trends and competitors, as well as the thoughts and ideas of approximately 300 potential customers. The development process is based on the methods taught during the two years of the master program Product Development at Chalmers University of Technology.
    [Show full text]
  • THE UNIVERSAL REMOTE SOLUTION for Smartphone
    WHAT’S INCLUDED IN THE PACKAGE P1CB - DEPLIANT AIR4 HOME - GB 1x Air4 Home / Air4 Home Pro device The app is compatible with Android and iOs and can be downloaded from: 1x wall and pole mounting bracket 4x screws 2x cable ties 2x batteries (type C - 1.5V) 1x screw with nut 2x screws with plugs TECHNICAL DATA Power supply 2 x 1.5V type C alkaline batteries (included) Compatible smartphones Android: 4.4 or higher with LE 4.2 Bluetooth iPhone: 4s, 5, 5s, 5c, 6, 6plus, 7, 8 and X with iOs 10 or higher Temperatures Operates at temperatures ranging from -20°C to +50°C Recommended positioning Place the Air4 Home/Air4 Home Pro at 1 m from the ground. The device works up to 20 m from the smartphone (without obstructions). Dimensions width: 134 mm, depth: 102 mm, height: 39 mm Weight 350 g (with batteries) AIR4 HOME AND AIR4 HOME PRO - PLUS THE UNIVERSAL REMOTE SOLUTION All-in-one Easy to install Weather-proof Controlled access Secure solution Wide coverage of Perfect for families Free app in solution and set-up IP66 certified with history function with 8-digit pin original remotes or businesses multiple languages for Smartphone This ithout & MAIN DIFFERENCES BETWEEN AIR4 HOME AND AIR4 HOME PRO The universal remote solution for smartphone Air4 Home is the universal solution for opening gates, garage doors and Works with up to 21 Works with up to 105 users barriers directly from the smartphone. It includes an easy-to-install different users or or smartphones and manag- device and a free-to-download app, communicating via Bluetooth.
    [Show full text]
  • Comcast DVR Remote Manual
    FEATURES AND FUNCTIONS Use Page+ (or Page–) switch to an input works. If it still does not work, try release Setup. control the device’s volume only De-Activating Channel Control Lock source. Searching For Your Code. in its own mode. to page up (or down) 3. Enter 9 - 9 - 0. The TV key will 1. On the remote control, press Use the remote control’s mode keys through menu screens (i.e., AUX, TV, or Cable) to control a spe- Use Enter to enter NOTE: If the device does not have a blink twice. Cable once. Then press and hold and the interactive Power key, press the (Play) key. cific device. When pressed, the selected channels on some TV 4. To view the code for the first digit, Unlocking All Volume Controls Setup until the Cable key blinks Comcast Custom DVR 3-Device program guide. models or information mode key will light, confirming your 7. For future reference, write your press 1 once. Wait 3 seconds and (Global Volume Unlock): twice, then release Setup. Universal Remote Control choice. Use the other keys to perform Use Guide to display on menu screens. count the number of times the TV device code in the appropriate 1. Press and hold Setup until the 2. Enter 9 - 7 - 3. Press CH- once. desired actions (see the following key the interactive key blinks (e.g., 3 blinks = 3) and Press PIP On-Off to boxes below: selected mode key blinks twice, The Cable key will blink four chart). program guide. write down the number in the display the PIP AUX Code: then release Setup.
    [Show full text]
  • Android and Bluetooth Technology Enabled Remote Control Using Smart Phone
    ISSN (Print) : 2320 – 3765 ISSN (Online): 2278 – 8875 International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering (An ISO 3297: 2007 Certified Organization) Vol. 3, Issue 5, May 2014 Android and Bluetooth Technology Enabled Remote Control Using Smart Phone M. Puthanial1, S.Rajeshwari2, Dr. P.C.Kishore Raja3, Dr. P.Shankar4 Associate professor, Dept. of ECE, Saveetha School of engineering, Saveetha University, Chennai, Tamilnadu, India1 Assistant professor, Dept. of CSE, Saveetha School of engineering, Saveetha University, Chennai, Tamilnadu, India2 Professor and Head, Dept. of ECE, Saveetha School of engineering, Saveetha University, Chennai, Tamilnadu, India3 Professor and Principal, Saveetha School of engineering, Saveetha University, Chennai, Tamilnadu, India4 ABSTRACT:This paper proposes a universal remote control using Smart phone. User can control appliances easily by his Smartphone via Bluetooth. Around 71% of mobile developers use Android platform attributable to the recognition and extra features of the system. Phones are called smartphones only when applications like GPS, Video calling are embedded into the device. This paper combines Android, Bluetooth and smartphones which are three powerful technologies. Today’s world without a Smartphone is very complex. As a result, we have combined the Remote control with the Smart phones and provide simple user interface, rather than complex number of buttons which we have seen in many universal remote controls. KEYWORDS:Universal Remote, PIC Micro controller, Bluetooth, Android, Smart Phones, Network. I.INTRODUCTION Nowadays, the number of appliance services and their complexity has increased. There is a need to get familiar with the different operations of many remote control manufacturers, which is very confusing.
    [Show full text]
  • Programmable Remote Codes
    PProgrammablerogrammable RemoteRemote CoCodesntrol User’s Guide The waterpwaterproofroof (03SI-RI) SkySkyVueVue Remote Control is pre-programmedpre-programmed with the latest library of codes. It is designed to operate the SkySkyVueVue OutdoorTV, Satellite, TV, Satellite,Cable Box, Cable and Box, DVD and Players. DVD Players. The Universal remoteremote controlcontrol has 4 sets of default codes. TV DVD SAT Cable 368 264 294 261 The rremoteemote contcontrolrol requiresrequires a CR2032 3 -volt lithium coin type battery (included) and easy programmingprogramming to controlcontrol your devices. For best results,results, please readread and perform all instructions listed here.here. Also, keep these instructions for futurefuture reference.reference. TABLE OF CONTENTS REMOTE CONTROL GUIDE 2 INSTALLING BATTERY 3 FEATURES AND FUNCTIONS 6 Key Charts 6 Device Table 6 SET UP YOUR COMPONENTS 6 SEArcHING FOR YOUR CODE 6 Manual Searching 6 Auto Searching 7 CHECKING THE CODE Using Learning 7 Learning Precautions 7 Programming a Learning Key 8 Deleting Functions from the Learning Keys 8 Restoring Factory Settings 8 MANUFACTURER’S CODES Setup Codes for Cable Box 9 Setup Codes for DVD 12 Setup Codes for Satellite Receivers 15 REMOTE CODES USER’S GUIDE | 1 User’s Guide- Programmable Remote Remote Control Guide POWER - Switch the TV power on or enter standby. TV - Push to control TV Learn - Push to teach remote features DVD - Push to control DVD player Satellite - Push to control the satellite receiver Cable - Push to control functions of the cable box Input - Push to change the viewing source on the television View Mode - Push to change format of the screen Display - Push to show content information.
    [Show full text]
  • User Manual 1.2 MB
    Congratulations! Congratulations on purchasing Universal Remote Control’s WR7 7-Component Pre--Programmed and Learning remote control. You now have the power to control your entire home entertainment system with one easy--to--use remote. The WR7can be used with thousands of audio/video compo- nents because of the extensive library of codes that have already been programmed into the remote. So... get ready to sit back, relax, and simplify your home entertainment experience. This Owner’s Manual is designed to assist you in programming your WR7 remote to work with your components by guiding you through an easy step- by-step process. Everything you need to know about programming the WR7 is contained in this Manual. WR7 Owner’s Manual© 2008 Universal Remote Control, Inc. This document is protected by the copyright laws of the United States and internationally by the Berne Convention. No part of this manual may be reproduced in any form without the express written consent of Universal Remote Control, Inc. Although reasonable care has been taken to assure the accuracy of the information herein contained, Universal Remote Control, Inc. is not responsible for operational, technical or editorial errors or omissions. The specifications and information in this manual may be subject to change without notice. MacroPower™ and SimpleSound™ are trademarks of Universal Remote Control, Inc. Entertainment Made Simple® is a registered trade- mark of Universal Remote Control, Inc. All other brand or product names are trademarks or regis- tered trademarks of
    [Show full text]
  • Verizon Universal Remote Control
    VERIZON FIOS TV with the brand of TV you have. Note: You can assign a DVD SWITCHING MODES people will want the remote to the order you want them to 1ST INSTALL BATTERIES You are probably already In addition to your STB and or VCR to the DVD key. The work. However, you can turn on or off. EMOTE ONTROL R C familiar with most of the keys TV, your remote can also AUX key is reserved for audio Press a Device Key on top of change how the Volume Keys 6. Press OK when done. The Install two new AA batteries. on the remote; however, there control two additional devices, receivers, amplifiers and VCR. the remote to switch modes. work. STB key will blink 3 times Make sure they are oriented may be a few which are new for example, a DVD player and For example, to control your to indicate success in to you. an audio receiver. Note: The remote will exit DVD player, press DVD. To If you always want the Volume programming. correctly. To test if the Keys to control the AUX device … batteries have been installed This is called “programming programming mode after 20 return to your FiOS TV STB correctly, press a few keys on • Options displays extra the remote.” If you don’t want seconds if no key is pressed. box, press STB. Pressing the Some people may want to For example, to program the the remote. One of the Device options or provides help to control devices other than TV, DVD or AUX key is like always adjust the volume Power Key to turn on or off Keys [DVD, AUX, TV, STB] based on what you are your FiOS TV STB, you do not WHAT IF NONE OF THE picking up the remote for that using their AUX device your TV, AUX and STB, in that on the top of the remote will doing.
    [Show full text]