DOCSLIB.ORG

Whole House Automation Made Simple Leviton and Samsung Smartthings

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Whole House Automation Made Simple Leviton and Samsung Smartthings Whole House Automation Made Simple Leviton and Samsung SmartThings. Whole house automation is made simple with a strategic partnership between Samsung SmartThings and Leviton, resulting in a pre-packaged home automation starter kit complete with two Z-Wave Plus lighting controls. The bundled kit includes the Samsung SmartThings Hub, a wireless Leviton universal dimmer, and a wireless Leviton light switch to get started with a smart home installation. Easily add plug-in modules, thermostats, sensors and more lighting controls to expand. Get started with the Hub, dimmer, and switch, which can be custom installed by a Leviton contractor. leviton.com/SmartThings Simplified Home Automation • App-based setup simplifies installation and automation scheduling • Multiple radios allow for compatible wireless Leviton devices to easily enroll • No required monthly fees or contracts Automate your home with a professionally installed solution. Control and automate lights, save money on energy, include connected thermostats, and add a wide variety of third party solutions to create a truly custom yet affordable and accessible smart home. Receive important notifications about what’s happening at the house, control smart devices with a simple tap, and automate the home to react to unique preferences. A smart way to simplify your life. “I made a Good Night Routine that turns off electronics and interior lights at bedtime.” Leviton Leviton Requires SmartThings Hub or compatible device with SmartThings Hub functionality. Products sold separately. Load Connected Control Switches leviton.com/SmartThings Leviton lighting and load controls can activate upon motion using wireless sensors. Routines can be established for what the home should do while asleep, awake, away, or home. Control and automate multiple lights with one button from the iOS or Android app. A Complete Smart Home Eco-System. Your new smart home solution begins with two lighting controls, but you can easily expand! Ask your professional installer about adding more Leviton lighting controls in the bedrooms and bathrooms, smart receptacles behind your living room media center, and sensors throughout to activate lighting based on motion. Add third-party solutions for a complete eco-system. A solution that makes night time easier. “I made a Goodnight Routine in the SmartThings app that turns off all lights and locks all doors every evening.” Connected Leviton Door Lock Connected Requires SmartThings Hub or compatible device with SmartThings Hub Dimmers functionality. Products sold separately. leviton.com/SmartThings Whole House Automation. Lighting control made easy Audio Control Access Control Notifications + Alarms Temperature control Compatible Wireless Leviton Devices. What works with Samsung SmartThings? Here are some of the Leviton devices that your professional installer can integrate into your home. A staircase that can light up the way. “I have a Leviton Sensor on the stairs that turns on the lights when it’s dark.” Leviton Leviton Requires SmartThings Hub or compatible device with SmartThings Hub functionality. Products sold separately. Motion Connected Sensor Lighting Controls leviton.com/SmartThings Starter Bundle In-Wall Switches • STKIT-2DS – Z-Wave Plus 600W Dimmer, • DZ15S – Switch, Z-Wave Plus DZ15S – Switch, SmartThings Hub • VRS15 – Z-Wave • VRF01 – Fan Control, Z-Wave • ZSS10 – Lumina RF • DL15S - Lumina RF Receptacles and Plug-ins • DZPA1 – Plug-in Outlet, Z-Wave Plus In-Wall Dimmers • DZPD3 – Plug-in Dimmer, Z-Wave Plus • DL15A - Plug-in Outlet, Lumina RF • DZ6HD – 600W Dimmer, Z-Wave Plus • DL3HL - Plug-in Dimmer, Lumina RF • DZ1KD – 1000W Dimmer, Z-Wave Plus • VRR15 – Split Duplex Receptacle, Z-Wave • DL6HD - 600W Dimmer, Lumina RF • DL1KD - 1000W Dimmer, Lumina RF • VRE06 – 600W Electronic Low Voltage Thermostats • VRMX1 – Universal, Z-Wave • VRI06 – 600W Incandescent, Z-Wave • RC-1000WHZB, Lumina RF • VRI10 – 1000W Incandescent, Z-Wave • RC-2000WHZB, Lumina RF 3-Way Devices Sensors • DD00R-DL - Matching Dimmer Remote • LURDW – Door/Window Contact, Lumina RF • DD0SR-DL – Matching Switch Remote • LURMD – Motion Detector, Lumina RF • Set Leviton lighting to activate upon motion using wireless sensors Heavy-Duty Load Control • Control and automate multiple lights • 73A00-3ZB – 30AMP LCM, Lumina RF with one button from iOS or Android • Set routines for what the home should do while asleep, awake, away, or home “Alexa, Turn on My Lights” Want to expand beyond Leviton lighting controls, heavy-duty load controls, sensors, thermostats, receptacles, and other smart devices? The Samsung SmartThings Hub allows installers to provide additional product integrations that are Z-Wave Plus and ZigBee enabled and certified with the Works with SmartThings program. The lights that I can turn on with my voice. “I can turn on the kitchen lights by simply saying ‘Alexa, turn on the kitchen lights.’ ” Amazon Leviton Requires SmartThings Hub or compatible device with SmartThings Hub functionality. Products sold separately. Alexa Connected Switches leviton.com/SmartThings • Certified solutions in the program include door locks, water shutoff valves, doorbell systems, cameras, and other smart options. • The coolest thing in home automation right now is voice control, allowing you to say, “Alexa, turn on my lights” and having your Leviton products automatically react. • Consult and employ a professional installer for the best mesh networking practices, proper device selection and integration, and custom designed schedules or routines. Visit Leviton.com/SmartThings to learn more and request a professional consultation for your home. Leviton Manufacturing Co., Inc. Global Headquarters 201 North Service Road, Melville, NY 11747-3138 Tel: 1-800-323-8920 Fax: 1-800-832-9538 • Tech Line: (8:30AM-7:00PM ET Monday-Friday): 1-800-824-3005 Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation 865 Fulton St., Suite 500, New Orleans, Louisiana, 70130 • Tel: 1-504-608-9001 Visit our website at: leviton.com/SmartThings SAS-10003 ©2017 Leviton Manufacturing Co., Inc. All rights reserved. REV OCT 2017.
Load more

Recommended publications
  • FULLTEXT01.Pdf
    Designing transparent display experience through the use of kinetic interaction A Master’s Thesis by Interaction Design Master’s Programme Rafael Rybczyński School of Arts and Communication (K3) Malmö University, Sweden August 2017 MSwedenugust 2017 Designing transparent display experience through the use of kinetic interaction Interaction Design Master’s Programme School of Arts and Communication (K3) Malmö University, Sweden August 2017 Author: Rafael Rybczyński Supervisor: Susan Kozel Examiner: Clint Heyer Thesis Project I 15 credits 2017 Acknowledgements Over the lengths of this thesis project I have received support and encouragement from a many people. First of all, I would like to thank my supervisor Susan Kozel for advising me to trust my own instinct. Moreover I would like humbly to thank all the participants without whom this project would not have been possible. Also humbly I thank Alvar, Sanna, and Susanne for shelter and feedback. For proofreading my thanks goes to Jan Felix Rybczyński and Sanna Minkkinen. Finally, my deepest gratitude is reserved to my father Dr. med. Jerzy Antoni Rybczyński. Rest in peace. I would have wished for you reading this paper. Author’s notes Often during the process of doing this study I was asked why transparent displays. What’s the point? Probably I would say this goes way back to my childhood when enjoying my father reading novel stories to us as good night stories. A good example of great stories was Scheerbart’s utopian architectural vision The Gray Cloth who told about the great Swiss architect who traveled by an airship. Wherever he went, he designed buildings made from brightly colored glass, including the roof.
    [Show full text]
  • Openfog Reference Architecture for Fog Computing
    OpenFog Reference Architecture for Fog Computing Produced by the OpenFog Consortium Architecture Working Group www.OpenFogConsortium.org February 2017 1 OPFRA001.020817 © OpenFog Consortium. All rights reserved. Use of this Document Copyright © 2017 OpenFog Consortium. All rights reserved. Published in the USA. Published February 2017. This is an OpenFog Consortium document and is to be used in accordance with the terms and conditions set forth below. The information contained in this document is subject to change without notice. The information in this publication was developed under the OpenFog Consortium Intellectual Property Rights policy and is provided as is. OpenFog Consortium makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of fitness for a particular purpose. This document contains content that is protected by copyright. Copying or distributing the content from this document without permission is prohibited. OpenFog Consortium and the OpenFog Consortium logo are registered trademarks of OpenFog Consortium in the United States and other countries. All other trademarks used herein are the property of their respective owners. Acknowledgements The OpenFog Reference Architecture is the product of the OpenFog Architecture Workgroup, co-chaired by Charles Byers (Cisco) and Robert Swanson (Intel). It represents the collaborative work of the global membership of the OpenFog Consortium. We wish to thank these organizations for contributing
    [Show full text]
  • Swarm Robotics Applications Using Argos and Mavproxy |
    WHITE PAPER Autonomous Swarms in Active Services Abstract Robotics has evolved across multiple industry segments, from manufacturing to advanced technology, surveillance, and disaster management. Typically, robotics-driven processes are characterized by a set of pre-defined requirements and operations, carried out by individual robots (bots), and performed at an accelerated pace. However, collective decision making by autonomous intelligent robots, leveraging the concepts of machine learning and artificial intelligence (AI), is becoming increasingly important for agile operations. Technological advances have helped realize swarm operations, in which autonomous bots work in a coordinated manner to effectively execute tasks. In this paper, we propose the approach, design, and implementation of a robot swarm ecosystem that enables: n Active servicing: Collective decision making and execution to solve problems n Collaboration: Automated swarm response to priority services, without external directives n Automaticity: Leveraging blockchain for real- time processing of services being advertised as well as exchange of information WHITE PAPER Autonomous Swarms: Current Trends and Challenges The robotics landscape is rapidly evolving, with bots already being deployed for enterprise operations, commercial purposes, home automation and industrial applications. Robot swarms are being leveraged across segments including retail, travel, healthcare, manufacturing and semiconductors, for a variety of use cases. These swarms are being enabled with the autonomy to operate independently once a preset task or a passive service is assigned, leading to an evolved ecosystem of autonomous nodes or swarms. However, autonomous nodes/swarms executing passive services have two specific failure points. One is central management and the other is a non-configurable preset task. De-centralized management is a viable option, but it only scales down the risk and does not eliminate the point of failure.
    [Show full text]
  • Smart Dust Technology
    250, Mini-Project Report Amy Haas Smart Dust Technology Smart dust is an emerging technology with a huge potential for becoming an internationally successful commercial venture. Now is the best time to invest in smart dust – right at the point at which the scientific community is close to perfecting the technology and its applications but its potential has not yet been realized by the capitalist market. Fundamental Concept Smart dust is a theoretical concept of a tiny wireless sensor network, made up of microelectromechanical sensors (called MEMS), robots, or devices, usually referred to as motes, that have self-contained sensing, computation, communication and power1. According to the smart dust project design created by a team of UC Berkeley researchers2, within each of these motes is an integrated package of “MEMS sensors, a semiconductor laser diode and MEMS beam-steering mirror for active optical transmission, a MEMS corner-cube retroreflector for passive optical transmission, an optical receiver, signalprocessing and control circuitry, and a power source based on thick-film batteries and solar cells.” The intent is that these motes will eventually become the size of a grain of sand or a dust particle, hence the name “smart dust”, but the technology still has a long way to go to achieve its target size. In current sensor technology, the sensors are about the size of a bottle cap or small coin. As with most electronic devices or technologies, the biggest challenges in achieving actual smart dust are the power consumption issues and making the batteries small enough. Although there is a lot of work being done on solar cells to keep the motes self-sustaining, the components are just not small enough yet to actually be considered smart dust.
    [Show full text]
  • Supporting Mobile Swarm Robotics in Low Power and Lossy Sensor Networks 1 Introduction
    1 Supporting Mobile Swarm Robotics in Low Power and Lossy Sensor Networks Kevin Andrea [email protected] Robert Simon [email protected] Sean Luke [email protected] Department of Computer Science George Mason University 4400 University Drive MSN 4A5 Fairfax, VA 22030 USA Summary Wireless low-power and lossy networks (LLNs) are a key enabling technology for the deployment of massively scaled self-organizing sensor swarm systems. Supporting applications such as providing human users situational awareness across large areas requires that swarm-friendly LLNs effectively support communication between embedded and mobile devices, such as autonomous robots. The reason for this is that large scale embedded sensor applications such as unattended ground sensing systems typically do not have full end-to-end connectivity, but suffer frequent communication partitions. Further, it is desirable for many tactical applications to offload tasks to mobile robots. Despite the importance of support this communication pattern, there has been relatively little work in designing and evaluating LLN-friendly protocols capable of supporting such interactions. This paper addresses the above problem by describing the design, implementation, and evaluation of the MoRoMi system. MoRoMi stands for Mobile Robotic MultI-sink. It is intended to support autonomous mobile robots that interact with embedded sensor swarms engaged in activities such as cooperative target observation, collective map building, and ant foraging. These activities benefit if the swarm can dynamically interact with embedded sensing and actuator systems that provide both local environmental or positional information and an ad-hoc communication system. Our paper quantifies the performance levels that can be expected using current swarm and LLN technologies.
    [Show full text]
  • Robot Based Home Automation
    International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8, Issue-1S4, June 2019 Robot based Home Automation L. Nikhil Manikanta, M. Pushpavalli, P. Saikumar, P. Sivagami, M. Vikram Reddy, P. Abirami Abstract--- Robot Based Home Automation, nowadays in the information for the security outside the home for potential society we cannot trust anyone compared to systems and robots. threats and smart control of things like main gates, garage By trusting robots and the internet of things is much more than and also scanning the person through facial recognition human beings. When it comes to our home, the concept is to outside the home [4]. The setup also contains the solar make it smarter, safer and automatic and with the security of a robot. This project looks on building smart wireless and robotic panels for lighting purpose in the garden at the night. There security system which sends second to second information to is a waterproof fire sensor for when the fire appears owners and that too stored in the cloud by using the internet of accidental in the home automatically it detects and sprinkler things in case of any raises an alarm. Home automation by will on and water will appear inside the home. Gas sensor making some set of sensors. Internet of things is growing more by also used in the kitchen due to detection of leakage of day by day. Internet of Things is a system that uses computers cooking gas and it gives the alarm. For old age people, the and mobile devices to control home functions through the internet from anywhere in the world.
    [Show full text]
  • A Literature Review on New Robotics: Automation from Love to War
    A literature review on new robotics : automation from love to war Citation for published version (APA): Royakkers, L. M. M., & Est, van, Q. C. (2015). A literature review on new robotics : automation from love to war. International Journal of Social Robotics, 7(5), 549-570. https://doi.org/10.1007/s12369-015-0295-x DOI: 10.1007/s12369-015-0295-x Document status and date: Published: 01/11/2015 Document Version: Publisher’s PDF, also known as Version of Record (includes final page, issue and volume numbers) Please check the document version of this publication: • A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal.
    [Show full text]
  • Android Based Home Automation and Energy
    INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS SPECIAL ISSUE, SEPTEMBER 2017 ANDROID BASED HOME AUTOMATION AND ENERGY CONSERVATION 1*M.Anto Bennet, 2B.Thamilvalluvan,2C.A.Hema Priya,2 B.Bhavani,2M.Shalini 1 Faculty of Electronics and Communication Department, vel tech, Chennai, India. 2 UG Students of Electronics and Communication Department, vel tech , Chennai, India. Email:[email protected] Submitted: May 27, 2017 Accepted: June 15, 2017 Published: Sep 1, 2017 Abstract- Wireless Sensor Network (WSN) consists of three main components: nodes, gateways, and software. The spatially distributed measurement nodes interface with sensors to monitor assets or their environment. In a WSN network the devices are connected to WSN nodes wherein the entire nodes uses Zigbee network to transfer the status of connected applications to a controller which controls the whole applications but the main drawback of Wireless sensor networks is its high interference, low coverage area and ability to control only low power devices. In order to overcome these drawbacks Android equipped devices are used to control the applications over GPRS network. Android equipped devices allow the user to control various applications over wireless networks. Being an open sourced platform it allows the user to design a custom module which controls the home applications by connecting the android equipped device and its corresponding home applications to an MCU wherein it uses relay circuits to connect the entire applications using GPRS network to connect the application controller and the android device. These devices can be used to control industrial applications, home applications like light, fan etc., and thereby conserving electricity.
    [Show full text]
  • Development of a 3D Digitisation System for Hostile Sites Mohammed Tamali, Tamali Mohammed, Tamali Abderrahmane, Mekhfi Soumia
    Development of a 3D digitisation system for hostile sites Mohammed Tamali, Tamali Mohammed, Tamali Abderrahmane, Mekhfi Soumia To cite this version: Mohammed Tamali, Tamali Mohammed, Tamali Abderrahmane, Mekhfi Soumia. Development ofa 3D digitisation system for hostile sites. 2019. hal-02192541 HAL Id: hal-02192541 https://hal.archives-ouvertes.fr/hal-02192541 Preprint submitted on 23 Jul 2019 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. 1 Development of a 3D digitisation system for hostile sites TAMALI Mohammed1 and TAMALI Abderrahmane2 and MEKHFI Soumia2 Abstract— Our project represents a contribution to the so- the stability of the environment, the degrees of freedom, and called hostile site management solution such as historic ruins, other parameters. We consider them so that we can ask the oil pipelines, earthquake-affected buildings, unexploited mines, robot well-adapted characteristics and compatible, as much sewage pipelines, sites infected by radioactivity. These places have a significant characteristic, the difficulty of access, which as possible, with the desired medium as tasks for robots makes human intervention very expensive and dangerous. Our in hostile environments. Also in sanitary and wastewater approach is to design a robotised autonomous and remote- circulation systems where their function is to discover the controlled [1] vehicle [2], [3] on which a mounted remote blocking points of and maintain excellent continuity, In sensing device LiDAR perform investigative and survey work.
    [Show full text]
  • Home Automation Planning Guide for Individuals with Autism
    HOME AUTOMATION PLANNING GUIDE FOR INDIVIDUALS WITH AUTISM WRITTEN BY A.J. PARON-WILDES WHY HOME AUTOMATION? When caring for an individual with autism, many needs must be addressed, and even the best caregiver can miss something or not see an incident coming. Home automation can offer protective solutions that support and elevate human care. The most important thing to remember when designing for individuals with autism is that they do not experience the designed environment in the same way others do. They can have increased sensitivities that evoke strong reactions to environmental stimuli. Color, lighting, sounds, and smells all can trigger extreme responses. Having an understanding that many people with autism have either hypo or hyper sensory issues will help you design an environment that can foster increased independence and confidence. Below I outline four main areas of consideration when starting a new design project or retrofitting a home to aid a person with autism. SAFETY The number-one priority for families with an autistic child is safety. Many of us do not understand the inherit dangers of our built environment and the impact it can have on those with autism. Daily challenges can range from possible elopement—kids walking out the front door—to an inadequate understanding of systems and appliances—how does the stove turn on and off? Then, as children get older, safety concerns shift. Instead of preventing the child from leaving the house, you monitor if and when they get in: Did they get off the bus and make it in the house independently? Can you see if a stranger is at the front door? Many children with autism have a hard time with speech, or have no speech, so communicating on the phone is not effective.
    [Show full text]
  • That Which Does Not Stabilize, Will Only Make Us Stronger
    That which does not stabilize, will only make us stronger. H. Kazerooni, R. Steger Department of Mechanical Engineering University of California, Berkeley Berkeley, CA 94720, USA [email protected] Abstract − The Berkeley Lower Extremity Exoskeleton (BLEEX) is a load-carrying and energetically autonomous human exoskeleton that, in this first generation prototype, carries up to a 34 kg (75 lb) payload for the pilot and allows the pilot to walk at up to 1.3 m/s (2.9 mph). This article focuses on the human-in-the-loop control scheme and the novel ring-based networked control architecture (ExoNET) that together enable BLEEX to support payload while safely moving in concert with the human pilot. The BLEEX sensitivity amplification control algorithm proposed here increases the closed loop system sensitivity to its wearer’s forces and torques without any measurement from the wearer (such as force, position, or electromyogram signal). The tradeoffs between not having sensors to measure human variables, the need for dynamic model accuracy, and robustness to parameter uncertainty are described. ExoNET provides the physical network on which the BLEEX control algorithm runs. The ExoNET control network guarantees strict determinism, optimized data transfer for small data sizes, and flexibility in configuration. Its features and application on BLEEX are described. I. INTRODUCTION The goal of the exoskeleton project at U.C. Berkeley is to develop fundamental technologies associated with the design and control of energetically autonomous lower extremity exoskeletons that augment human strength and endurance during locomotion. The first generation lower extremity exoskeleton (commonly referred to as BLEEX) is comprised of two powered anthropomorphic legs, a power unit, and a backpack-like frame on which a variety of heavy loads can be mounted.
    [Show full text]
  • Noninvasive Electroencephalography Equipment for Assistive, Adaptive, and Rehabilitative Brain–Computer Interfaces: a Systematic Literature Review
    sensors Systematic Review Noninvasive Electroencephalography Equipment for Assistive, Adaptive, and Rehabilitative Brain–Computer Interfaces: A Systematic Literature Review Nuraini Jamil 1 , Abdelkader Nasreddine Belkacem 2,* , Sofia Ouhbi 1 and Abderrahmane Lakas 2 1 Department of Computer Science and Software Engineering, College of Information Technology, United Arab Emirates University, Al Ain P.O. Box 15551, United Arab Emirates; [email protected] (N.J.); sofi[email protected] (S.O.) 2 Department of Computer and Network Engineering, College of Information Technology, United Arab Emirates University, Al Ain P.O. Box 15551, United Arab Emirates; [email protected] * Correspondence: [email protected] Abstract: Humans interact with computers through various devices. Such interactions may not require any physical movement, thus aiding people with severe motor disabilities in communicating with external devices. The brain–computer interface (BCI) has turned into a field involving new elements for assistive and rehabilitative technologies. This systematic literature review (SLR) aims to help BCI investigator and investors to decide which devices to select or which studies to support based on the current market examination. This examination of noninvasive EEG devices is based on published BCI studies in different research areas. In this SLR, the research area of noninvasive Citation: Jamil, N.; Belkacem, A.N.; BCIs using electroencephalography (EEG) was analyzed by examining the types of equipment used Ouhbi, S.; Lakas, A. Noninvasive for assistive, adaptive, and rehabilitative BCIs. For this SLR, candidate studies were selected from Electroencephalography Equipment the IEEE digital library, PubMed, Scopus, and ScienceDirect. The inclusion criteria (IC) were limited for Assistive, Adaptive, and to studies focusing on applications and devices of the BCI technology.
    [Show full text]