BD-E5400

Blu-ray™ Disc Player user manual

imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register

ENGLISH CLASS 1 LASER product Precautions Safety Information This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, Important Safety Instructions Warning adjustments or performance of procedures other than those specified herein may result in Read these operating instructions carefully TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). hazardous radiation exposure. before using the unit. Follow all the safety instructions listed below. NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE Complies with 21CFR 1040.10 except for Keep these operating instructions handy for PERSONNEL. deviations pursuant to Laser Notice No. 50, future reference. dated June 24, 2007. Read these instructions. CAUTION DANGER : 1. RISK OF ELECTRIC SHOCK DO NOT OPEN • VISIBLE AND INVISIBLE LASER 2. Keep these instructions. RADIATION WHEN OPEN. AVOID DIRECT 3. Heed all warnings. The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF The explanation point within the triangle EXPOSURE TO BEAM. (FDA 21 CFR) triangle is a warning sign alerting you of ELECTRIC SHOCK, DO NOT REMOVE is a warning sign alerting you of important 4. Follow all instructions. dangerous voltage inside the product. COVER (OR BACK) NO USER SERVICEABLE instructions accompanying the product. CAUTION : PARTS INSIDE. REFER SERVICING TO • CLASS 3B VISIBLE AND INVISIBLE 5. Do not use this apparatus near water. QUALIFIED SERVICE PERSONNEL. LASER RADIATION WHEN OPEN. AVOID 6. Clean only with a dry cloth. EXPOSURE TO THE BEAM. (IEC 60825-1) Do not block any ventilation openings. • Reorient or relocate the receiving antenna. 7. WARNING • THIS product UTILIZES A LASER. USE Install in accordance with the • Increase the separation between the OF CONTROLS OR ADJUSTMENTS • To reduce the risk of fire or electric shock, manufacturer's instructions. equipment and receiver. OR PERFORMANCE OF PROCEDURES do not expose this appliance to rain or Do not install near any heat sources • Connect this equipment into an outlet on OTHER THAN THOSE SPECIFIED HEREIN 8. moisture. such as radiators, heat registers, a circuit different from that to which the MAY RESULT IN HAZARDOUS RADIATION stoves, or other apparatus (including AV receiver is connected. EXPOSURE. DO NOT OPEN COVER AND receivers) that produce heat. FCC NOTE (for U.S.A) • Consult the dealer or an experienced radio/ DO NOT REPAIR YOURSELF. REFER This equipment has been tested and found TV technician for help. SERVICING TO QUALIFIED PERSONNEL. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. to comply with the limits for a Class B digital This class B digital product meets all A polarized plug has two blades with device, pursuant to Part 15 of the FCC requirements of the Canadian Interference - CLASS 1 LASER PRODUCT one wider than the other. A grounding rules. These limits are designed to provide Causing Equipment Regulations. KLASSE 1 LASER PRODUKT type plug has two blades and a third reasonable protection against harmful LUOKAN 1 LASER LAITE grounding prong. The wide blade or interference in a residential installation. This KLASS 1 LASER APPARAT Note to CATV system installer the third prong are provided for your equipment generates, uses and can radiate PRODUCTO LÁSER CLASE 1 safety. If the provided plug does not fit radio frequency energy and, if not installed This reminder is provided to call CATV system installer's attention to Article 820- ✎ into your outlet, consult an electrician for and used in accordance with the instructions, NOTE 40 of the National Electrical Code (Section ✎ replacement of the obsolete outlet. may cause harmful interference to radio or `` If the Region number of a Blu-ray Disc/ 54 of Canadian Electrical Code, Part I) that Protect the power cord from being television reception, which can be determined does not correspond to the Region number of 10. walked on or pinched particularly at by turning the equipment off and on. provides guidelines for proper grounding and, this player, the player cannot play the disc. in particular, specifies that the cable ground plugs, convenience receptacles, and the The user is encouraged to try to correct the shall be connected to the grounding system point where it exits the apparatus. interference by one or more of the following of the building as close to the point of cable measures: 11. Only use attachments/accessories entry as practical. specified by the manufacturer. 2 12. Use only with the cart, • Disc Storage stand, tripod, bracket, `` Do not keep in direct sunlight. or table specified by `` Keep in a cool ventilated area. Contents the manufacturer, `` Keep in a clean protection jacket and Language Settings...... or sold with the Safety Information 13 store vertically. Security Settings...... apparatus. When Warning...... 2 13 a cart is used, use General Settings...... Precautions...... 2 13 caution when moving the cart/apparatus Handling Cautions Disc Storage & Management...... Support Settings...... 13 combination to avoid injury from tip-over. 3 • Do not expose this apparatus to dripping Handling Cautions...... 3 13. Unplug this apparatus during lightning or splashing. Do not put objects filled with Media Play storms or when unused for long periods Copyright...... 3 liquids, such as vases on the apparatus. Insert a Disc...... 14 of time. • To turn this apparatus off completely, you Insert a USB Device...... 14 Refer all servicing to qualified service must pull the power plug out of the wall Getting Started 14. Controlling Video Playback...... personnel. Servicing is required when socket. Consequently, the power plug must Before using the User Manual...... 4 15 be easily and readily accessible at all times. the apparatus has been damaged in any Logos of Discs the player can play...... Controlling Music Playback...... 15 • Do not plug multiple electric devices into 4 way, such as when the power-supply Playing Photo Contents...... the same wall socket. Overloading a socket Accessories...... 5 16 cord or plug is damaged, liquid has can cause it to overheat, resulting in a fire. Front Panel...... 6 been spilled or objects have fallen into • Maintenance of Cabinet. Appendix the apparatus, the apparatus has been Rear Panel...... 6 -- Before connecting other components to Troubleshooting...... 16 exposed to rain or moisture, does not this player, be sure to turn them off. Remote Control...... 6 operate normally, or has been dropped. Specifications...... 18 -- If you move your player suddenly from a cold place to a warm place, condensation Connections may occur on the operating parts and A. Connecting to a TV...... Disc Storage & Management lens and cause abnormal disc playback. If 7 this occurs, unplug the player, wait for two B. Connecting to an Audio System...... 7 • Holding Discs hours, and then connect the plug to the C. Connecting to a Network...... 7 -- Fingerprints or scratches power outlet. Then, insert the disc, and try on a disc may reduce to play back again. Settings sound and picture quality • If the product makes an abnormal noise or cause skipping or produces a burning smell or smoke, The Initial Settings Procedure...... 8 -- Avoid touching the surface of a disc turn off the power switch immediately and Menu Navigation...... 8 disconnect the power plug from the wall where data has been recorded. outlet. Then, contact the nearest customer Accessing the Settings Menu...... 9 -- Hold the disc by the edges so that service center for technical assistance. Do Display Settings...... 9 fingerprints will not get on the surface. not use the product. Using the product as Audio Settings...... 10 -- Do not stick paper or tape on the disc. it is may cause a fire or an electric shock. Network Settings...... • Cleaning Discs 10 System Settings...... -- If you get fingerprints or dirt Copyright 12 on a disc, clean it with a mild detergent diluted in water © 2012 Samsung Electronics Co.,Ltd. and wipe with a soft cloth. All rights reserved; No part or whole of this -- When cleaning, wipe gently user's manual may be reproduced or copied without the prior written permission of from the inside to the outside of the disc. Samsung Electronics Co.,Ltd. 3 • Some USB/External HDD/digital camera Region Code devices may not be compatible with the player. Getting Started Both players and discs are coded by region. • Your player supports the FAT16, FAT32, These regional codes must match for a disc and NTFS file systems. Before using the User Manual to play. If the codes do not match, the disc • Connect USB devices directly to the player’s will not play. USB port. Connecting through a USB cable may cause compatibility problems. Disc Types and Contents your player can play The Region Code for this player is displayed on the rear panel of the player. • Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly. Media Disc Type Details Region Disc Type Area Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format. Code • The player does not support the PTP protocol. • Do not disconnect a USB device during a DVD-VIDEO North America, Central “loading” process. DVD-RW DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have America, South America, VIDEO Blu-ray • The bigger the image resolution, the longer DVD-R been recorded and finalized, or a USB storage media containing MKV Disc a Korea, Japan, Taiwan, Hong the image takes to display. DVD+RW or MP4 contents. Kong and South East Asia. • This player cannot play MP3 files with DRM DVD+R (Digital Rights Management) downloaded DVD- The U.S., U.S. territories and CD-RW/-R, 1 from commercial sites. Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB VIDEO Canada MUSIC DVD-RW/-R, storage media containing MP3 or WMA contents. • Your player only supports video with a BD-RE/-R frame rate under 30fps (frames per second). CD-RW/-R, • Your player only supports USB Mass Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB PHOTO DVD-RW/-R, Logos of Discs the player can play Storage Class (MSC) devices such as storage media containing JPEG contents. BD-RE/-R thumb drives and USB HDD. (HUB is not ✎ supported.) ✎ NOTE • Certain USB HDD Devices, multi-card `` The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions. readers and thumb drives may not be `` If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable. compatible with this player. Blu-ray Disc BD-LIVE • If some USB devices require excessive `` Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps. power, they may be limited by the circuit ` ` Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds safety device. 25 Mbps. • If playback from a USB HDD is unstable, `` Playback may not work for some types of discs, or when you use specific functions, such as angle change provide additional power by plugging the and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to NTSC broadcast system in U.S.A, Canada, Korea, Japan HDD into a wall socket. this if necessary. If the problem continues, contact the USB `` When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly. HDD manufacturer. Supported File Formats • You must remove the USB storage device Disc types your player cannot play safely. (by performing the "Safely Remove Notes on the USB connection USB" function to prevent possible damage • HD DVD • DVD-RAM • DVD-RW(VR mode) • 3.9 GB DVD-R for • Your player supports USB storage media, to the USB memory.) • DVD-ROM/PD/ • Super Audio CD • CVD/CD-ROM/ Authoring. MP3 players, digital cameras, and USB Press the HOME button to move to the MV, etc (except CD layer) CDV/CD-G/CD-I/LD card readers. home screen, press the YELLOW (C) v (CD-Gs play audio • The player does not support folder or file button, and then press the button. only, not graphics.) names longer than 128 characters. 4 • SAMSUNG is not responsible for any data file damage or data loss. •• Audio decoder • Your player does not support NTFS compressed files, sparse files, or encrypted files. -- Supports WMA 7, 8, 9 and STD • You can repair or format a USB device on your Desktop PC. (MS-Windows OS only) -- Does not support WMA sampling rate of 22050Hz mono.

Video File Support Music File Support

File Extension Container Video Codec Resolution File Extension Container Audio Codec Support Range MP3 *. MP3 MP3 - MP4v3 1920x1080 Dolby Digital * Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48 *.avi AVI DTS *.wma WMA WMA WMA * Bit rates - All bit-rates from 5kbps to 384kbps H.264 BP/MP/HP 1920x1080 PCM AVCHD (Advanced Video Codec High Definition) VC-1 AP MP3 1920x1080 *.mkv MKV Dolby Digital • This player can play back AVCHD format discs. These discs are normally recorded and used H.264 BP/MP/HP DTS 1920x1080 in camcorders. VC-1 AP 1920x1080 • The AVCHD format is a high definition digital video camera format. *.wmv WMV (wmv9) WMA • The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the VC-1 SM 1920x1080 conventional image compressing format. MP4 (mp4v) 1920x1080 *.mp4 MP4 AAC • Some AVCHD discs use the “x.v.Color” format. This player can play back AVCHD discs that H.264 BP/MP/HP 1920x1080 use “x.v.Color” format. MPEG1 MP1, 2 1920x1080 • “x.v.Color” is a trademark of Corporation. *.mpg PS MPEG2 Dolby Digital 1920x1080 *.mpeg • “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. H.264 BP/MP/HP DTS 1920x1080 and Sony Corporation. ✎ •• Limitations ✎ NOTE `` Some AVCHD format discs may not play, depending on the recording condition. -- Even when a the file is encoded by a supported codec mentioned above, the file might not AVCHD format discs need to be finalized. be played if its content has a problem. `` “x.v.Color” offers a wider color range than normal DVD camcorder discs. -- Normal playback is not guaranteed if the file’s container information is wrong or the file ` itself is corrupted. ` Some MKV and MP4 format discs may not play, depending on the video resolution and frame rate condition. -- Files having higher Bit rate/frame rate than standard may stutter during sound/video playback. -- The Seek (skip) function is not available if the file’s index table is damaged. Accessories

•• Video decoder Check for the supplied accessories shown below. -- Supports up to H.264 Level 4.1 and AVCHD -- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4 -- MPEG4 SP, ASP : Below 1280 x 720 : 60 frames max Above 1280 x 720 : 30 frames max -- Does not support GMC 2 or higher Batteries for Remote Control User Manual Remote Control (AAA Size) (BN43-00004A) (AK68-02273A) (AK59-00146A) 5 Front Panel Remote Control

PLAY/PAUSE BUTTON Tour of the Remote Control STOP BUTTON

Turn the player on and off. Turn the TV on and off. OPEN/CLOSE BUTTON After setup, allows you to set the input source on your TV. POWER BUTTON Press to eject a disc. TV volume adjustment.

Press numeric buttons to operate options.

Use to enter the disc menu. Use to enter the popup menu/title menu.

Press to skip backwards or forwards. Press to search a disc backwards or forwards. REMOTE CONTROL SENSOR Press to stop a disc. Press to pause a disc. ✎ DISC TRAY Press to play a disc. Press to use Netflix. ✎ NOTE Press to move to the home menu. Press to use Pandora. `` When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and Press to use Tools menu. Use to display the playback information then press the v button. when playing a Blu-ray Disc/DVDs. Use to select menu items and change menu values.

Rear Panel Return to the previous menu. Press to exit the menu.

These buttons are used both for menus on the player and also several Blu-ray Disc functions. Allows you to repeat a title, chapter, track or Press to see the full screen on a TV. disc. Use to access various audio functions on a Press to switch the Blu-ray Disc/DVD’s disc (Blu-ray Disc/DVD). subtitle language.

✎ Installing batteries ✎ NOTE `` If the remote does not operate properly: • Check the polarity (+/–) of the batteries. • Check if the batteries are drained. • Check if the remote sensor is blocked by HDMI OUT USB HOST obstacles. ✎ • Check if there is any fluorescent lighting nearby. ✎ NOTE ! `` You can perform software upgrades using the USB Host jack with a USB flash memory stick only. ! CAUTION `` Dispose of batteries according to local environmental 6 regulations. Do not put them in the household trash. Connections Connecting to an Audio System (HDMI supported AV receiver) 1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the A. Connecting to a TV HDMI IN terminal of your AV receiver. See page 8. 2. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN terminal of your TV. Connecting to a TV with an HDMI Cable 3. Turn on the player, TV, and AV receiver. 1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the 4. Using the input select button of the AV receiver and TV, select the correct HDMI input or HDMI IN terminal of your TV. See page 8. source on each to hear sound and see video from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input. 2. Turn on the player and TV. If this is the first time you have turned on the Blu-ray player, the Initial Settings screen Press the input selector on your TV remote control until the HDMI signal from the player 5. 3. appears. See page 8. appears on your TV screen. 4. If this is the first time you have turned on the Blu-ray player, the Initial Settings screen appears. See page 8. ✎ C. Connecting to a Network NOTE ✎ This player lets you use network based services, such as BD-LIVE, and download software `` An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable. upgrades when it is connected to a network. We recommend using a Broadband modem (with ` ` If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a integrated router) or an IP router for the connection. For more information on router connections, High speed (category 2) HDMI cable. refer to the user manual of the router or contact the router manufacturer for technical assistance. `` HDMI outputs only a pure digital signal to the TV. If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on Wireless Network the screen. You can connect this unit to a network via a wireless connection. See page 8. `` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of 1. your TV. 2. Set the network options. See pages 10~12. ` ✎ ` When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI ✎ NOTE output resolution will be automatically set to the highest supported by the TV. `` If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the `` A long HDMI cable may cause screen noise. If this occurs, set Deep Color to Off in the menu. wireless network. `` If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio `` Set your wireless router to Infrastructure mode. Adhoc mode is not supported. Out to an audio sytem to hear audio. `` The player supports only the following wireless security key protocols: -- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES) ` B. Connecting to an Audio System ` Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure. • Please turn the volume down when you turn on the AV receiver. A sudden loud sound `` If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your may cause damage to the speakers and your ears. router to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with • Please set the audio format according to the capabilities of your AV receiver. new Wi-Fi certification specifications. • The position of HDMI input terminals may vary depending on your AV receiver. Please `` Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router refer to the user manual of your AV receiver. performance, distance, obstacles, interference by other radio devices, etc). 7 Connecting to a TV Settings ` A The Initial Settings Procedure ` If you leave the player in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the player is • The Home screen will not appear if you do not left in the screen saver mode for more than 25 configure the initial settings. minutes, the power will automatically turn off. HDMI cable • The OSD (On Screen Display) may change in this (not included) player after you upgrade the software version. Menu Navigation • The access steps may differ depending on the menu you selected. Connecting to an Audio System • After the loading process of this product is 1 B HDMI cable finished, the panel buttons and remote control (not included) can be operated.

The Initial Settings Procedure lets you set 3 the OSD and menu languages, configure the connection to your home network, and 2 4 choose the aspect ratio output (screen size and format) that is correct for your TV. ✎ 1 HOME Button : Press to move to the Home HDMI cable NOTE menu. ✎ ` (not included) ` The Home menu will not appear if you do not 2 configure the initial settings except as noted below. RETURN Button : Return to the previous menu. ` v ` If you press the BLUE (D) button during (Enter) / DIRECTION Button : network setup, you can access the Home menu 3 Move the cursor or select an item. even if the network setup is not completed yet. Activate the currently selected item. `` When you return to the Home menu, the full Confirm a setting. screen mode is cancelled automatically. 4 Button : Press to exit the current menu. `` If you want to display the Initial Setting screen EXIT Network @ again to make changes, press the button on • C the front panel of the player for more than 5 Home Menu 3 seconds with no disc inserted. This resets the 4 player to its default settings. 5 `` After the loading process of this product is

finished, you can operate the HDMI-CEC function. PANDORA® 2 internet radio YouTube ` HD Movies CinemaNow Wireless Router ` If you want to use an Anynet+(HDMI-CEC) 6 function, please follow the instructions below. Videos 7 1) Connect the player to an Anynet+(HDMI- 8 Broadband service CEC) compliant Samsung TV using HDMI Cable. 1 ✎ 2) Set the Anynet+(HDMI-CEC) feature to On in 9 ✎ NOTE : You can only connect this unit to a network via a wireless connection. both the TV and the player. a d " 0 8 3) Set the TV to the Initial Settings Procedure. No Disc Change Device View Devices Enter ✎ ✎ 1 Selects Videos. ✎ NOTE Resolution ✎ NOTE `` The access steps may differ depending on `` If the TV you connected to the player does not 2 Selects Netflix. the menu you selected. The OSD (On Screen Lets you set the output resolution of the HDMI support Movie Frame or the resolution you video signal to Auto, 1080p, 1080i, 720p or 3 Display) may change in this player after you selected, the message “If no pictures are shown Selects VUDU HD Movies. upgrade the software version. 480p. The number indicates the number of after selecting ‘Yes’, please wait for 15 seconds 4 lines of video per frame. The i and p indicate to return to the previous resolution. Do you Selects CinemaNow. interlaced and progressive scan, respectively. want to change the resolution?” appears. If you ® Display Settings The more lines, the higher the quality. select Yes, the TV’s screen will go blank for 15 5 Selects Pandora Internet Radio. seconds, and then the resolution will revert to You can configure various display options 6 Selects YouTube. Resolution according to the output the previous resolution automatically. such as the TV Aspect Ratio, Resolution, etc. mode `` If the screen stays blank after you have 7 Selects Photos. changed the resolution, remove all discs, • Blu-ray Disc/E-contents/Digital Contents and then press and hold the @ button on the 8 TV Aspect Ratio Selects Music. playback front of the player for more than 5 seconds. Depending on the type of television you have, 9 All settings are restored to the factory default. Selects Settings. you may want to adjust the screen size setting. HDMI / connected Follow the steps on the previous page to access each mode and select the Display Setup ✎ Output HDMI Mode 0 Displays the buttons you can use on the ✎ NOTE that your TV will support. remote to access functions. ` E-contents/ ` Depending on the disc type, some aspect Setup `` When the factory default settings are restored, ratios may not be available. Blu-ray Disc Digital contents all stored user BD data is deleted. ✎ `` If you select an aspect ratio and option which is ` NOTE Resolution of ` The Blu-ray Disc must have the 24 frame feature ✎ ` different than the aspect ratio of your TV screen, BD Wise 1080p for the player to use the Movie Frame (24Fs) mode. ` The Videos, Photos, and Music options require the picture might appear to be distorted. Blu-ray Disc that you have an appropriate disc inserted into the `` If you select the 4:3 Pan-Scan or 4:3 Letter Max. Resolution Max. Resolution player or a USB flash device attached to the player. Auto Box, pressing the FULL SCREEN button on the of TV input of TV input Movie Frame (24Fs) ` ` The Netflix, VUDU, Cinema Now, Pandora, and remote will not bring up a full screen picture. 1080p@60F ` 1080@60F 1080@60F Setting the Movie Frame (24Fs) feature to YouTube options require a working Internet ` If you select the 16:9 Original, your TV may display (Movie Frame : Off) Auto allows you to adjust the player’s HDMI connection. 4:3 Pillarbox (black bars on sides of picture). If this output to 24 frames per second for improved occurs, pressing the button on the Movie Frame : FULL SCREEN 1080@24F 1080p@24F picture quality. remote will not bring up a full screen picture. Auto (24Fs) Accessing the Settings Menu 1080i 1080i 1080i You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. BD Wise (Samsung TVs only) 720p 720p 720p To access the Settings menu and sub-menus, You can select Movie Frame only when the follow these steps: BD Wise is Samsung’s latest inter-connectivity feature. 480p 480p 480p player is in the HDMI 1080i or 1080p output When you connect a Samsung player and a Samsung TV resolution modes. • 1. Press the POWER button. with BD Wise to each other via HDMI, and BD Wise is on DVD playback The Home Menu appears. in both the player and TV, the player outputs video at the Output HDMI / connected HDMI Color Format 2. Press the ◄► buttons to select Settings, video resolution and frame rate of the Blu-ray Disc/DVDs. and then press the v button. ✎ Setup HDMI Mode Lets you set the color space format for ✎ NOTE BD Wise 480i HDMI output to match the capabilities of the 3. Press the ▲▼ buttons to select the `` When BD Wise is on, the Resolution setting Auto Max. Resolution of TV input connected device (TV, monitor, etc). desired submenu, and then press the v automatically defaults to BD Wise and BD Wise 1080p 1080p button. appears in the Resolution menu. ` 1080i 1080i HDMI Deep Color 4. Press the ▲▼ buttons to select the desired ` If the player is connected to a device that does not item, and then press the v button. support BD Wise, you can not use the BD Wise function. 720p 720p Lets you output video from the HDMI OUT jack with `` For proper operation of BD Wise, set the BD 480p 480p Deep Color. Deep Color provides more accurate 5. Press the EXIT button to exit the menu. Wise menu of both the player and the TV to On. color reproduction with greater color depth. 9 * If the Source Stream is 2ch, “Re-encoded • If your TV is not compatible with PCM Progressive Mode Dolby D” Setting is not applied. Output will sampling rates over 48kHz, the player may Lets you improve picture quality when viewing DVDs. be PCM 2ch. output 48kHz downsampled PCM audio Blu-ray Discs may include three audio even though you set PCM Downsampling to . Audio Settings streams : Off -- Main Feature Audio : The audio soundtrack of the main feature. Dynamic Range Control Digital Output -- BONUSVIEW audio : An additional You can listen at low volumes, but still hear Set the Digital Output to match the capabilities of the AV receiver you’ve connected to the soundtrack such as the director or actor’s dialog clearly. player : For more details, please refer to the Digital Output Selection table below. commentary. This is only active if your player detects a -- Navigation Sound Effects : When you Dolby Digital signal. Digital Output Selection choose a menu navigation selection, a Navigation Sound Effect may sound. Downmixing Mode Bitstream Bitstream Navigation Sound Effects are different on Bitstream Setup PCM (Re-encoded (Re-encoded (Unprocessed) each Blu-ray Disc. Select the Downmix method for stereo output. DTS) Dolby D) Re-encoded ✎ PCM Up to PCM 7.1ch PCM DTS re-encoded ✎ NOTE Dolby Digital * `` Be sure to select the correct Digital Output or Network Settings Re-encoded Dolby Digital PCM 2ch Dolby Digital DTS re-encoded you will hear no sound or just loud noise. Dolby Digital * Please contact your ISP to find out if your IP ` Re-encoded ` If the HDMI device (AV receiver, TV) is not address is static or dynamic. If it is dynamic Dolby Digital Plus PCM 2ch Dolby Digital Plus DTS re-encoded Dolby Digital * compatible with compressed formats (Dolby - and most are - we recommend using the Audio Stream Re-encoded Digital, DTS), the audio signal outputs as PCM. Auto procedure for network setup. This is on Blu-ray Dolby TrueHD PCM 2ch Dolby TrueHD DTS re-encoded Dolby Digital * easiest and will work in the majority of cases. Disc `` Regular DVDs do not have BONUSVIEW audio Re-encoded If it is static, you must use the manual set up DTS PCM 2ch DTS DTS re-encoded and Navigation Sound Effects. Dolby Digital * procedure. (See page 11.) ` DTS-HD Hi Re-encoded ` Some Blu-ray Discs do not have BONUSVIEW Network setup directions start below. PCM 2ch DTS-HD Hi Resolution Audio DTS re-encoded Resolution Audio Dolby Digital * audio and Navigation Sound Effects. ✎ DTS-HD Master Re-encoded `` If you play MPEG audio soundtracks, the audio NOTE PCM 2ch DTS-HD Master Audio DTS re-encoded ✎ ` Audio Dolby Digital * signal outputs as PCM regardless of your ` This unit can only be connected to a Network PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch Digital Output selections (PCM or Bitstream). via a wireless connection. Audio Stream Dolby Digital PCM 2ch Dolby Digital Dolby Digital Dolby Digital on DVD DTS PCM 2ch DTS DTS DTS PCM Downsampling Automatic Network Setup Decodes the main Decodes the main Lets you set 48kHz and 96kHz PCM down- feature audio and In the Home menu, press the ◄► feature audio and sampling on or off. 1. Outputs only the main feature BONUSVIEW audio buttons to select , and then BONUSVIEW audio Settings Decodes the main feature audio stream so that your stream together v stream together into press the button. audio and BONUSVIEW AV receiver can decode the into PCM audio and HDMI Definition for PCM audio and adds Press the ▲▼ buttons to select , Any audio stream together audio bitstream. adds Navigation 2. Network Blu-ray Disc Navigation Sound • If your TV is not compatible with and then press the v button. into PCM audio and adds You will not hear BONUSVIEW Sound Effects, then Effects, then re- compressed multi-channel formats (Dolby Navigation Sound Effects. audio or Navigation Sound re-encodes the PCM Press the ▲▼ buttons to select encodes the PCM Digital, DTS), the player may output PCM 3. Effects. audio into Dolby , and then press the audio into DTS 2ch downmixed audio even though you Network Setting Digital bitstream or v button. The Network Setting screen bitstream. selected Bitstream (either Re-encoded or PCM. appears. Unprocessed) in the setup menu. 10 Settings • Use the arrow keys on your remote 10. Wait until the connection confirmation 6. Enter the IP Address, Subnet Mask, Network Setting to move from button to button on the message is displayed, and then press and values. Display Gateway Access Point Selection : Not Selected v Audio \ Security Key screen. the button. The Network Settings Internet Protocol Setup : Auto 7. Press the ▼ to go to DNS. Network IP Address : 0 0 0 0 screen reappears. System Subnet Mask : 0 0 0 0 • To change the kind of characters Press the ▼ button to go to the first Language 8. Gateway : 0 0 0 0 you are entering, move to the button 11. To test the connection, press the ▼ DNS entry field. Enter the numbers as SecurityDNS : Auto  General DNS Server : 0 0 0 0 labeled a/A/1/ , and then press the button to select Network Test, and then above. Support a > " ' v v WPS(PBC) Move Select Return button. Each time you press the press the button. When done, press the ▲ button to return v button, you change the kind of 9.  to Access Point Selection. Select the characters you can enter (a/A/1/ ). Manual Network Setup network, and then press the v button. 4. Select Access Point Selection, and • You can also change the kind of v then press the button. character by pressing the If the Auto Setting does not work, you need DISC to enter the Network settng values manually. WPS(PBC) function The Network function searches for MENU button on the remote. Before you start manual network setup, you available wireless networks. • To enter a letter, press the number The easiest way to set up the wireless need the network setting values. When done, it displays a list of the button that corresponds to the network connection is using the WPS(PBC) available networks. letter. Pressing the button repeatedly To get the Network setting values, contact function. your ISP or your network administrator. If your wireless router has a WPS(PBC) 5. In the list of networks, press the ▲▼ changes the letter. To Enter the Network settings into your player, button, follow these steps: buttons to select a network, and then • To enter a number or symbol when v follow these steps: press the button. the Security Key screen is displaying 1. In the Network Settings menu, press the If the Security Key screen appears, go numbers or symbols, press the On the Internet Protocol Setup screen, ▲▼ buttons to select Network Setting, 6. 1. v to Step 7. If the Network Connecting corresponding number button once. press the v button. and then press the button. Screen appears, go to Step 10. The Internet Protocol Setup screen • To delete the last letter, number, or 2. Press the ▲▼ buttons to select Manual, v appears. 7. On the Security Key screen, enter your symbol you entered, move to the and then press the button. Press the button on the remote network’s Pass Phrase. Delete button, and then press the 2. RED (A) v ✎ button. Settings control. NOTE Network Setting ✎ Display ` Access Point Selection : Not Selected 3. Press the WPS(PBC) button on your ` You should be able to find the Pass Phrase on • To see and use additional symbols, Audio \ [ ] Internet Protocol Setup : Manual router within two minutes. Your player one of the set up screens you used to set up press the or button when Network IP Address : 0 0 0 0 your router or modem. the Security Key screen is displaying System Subnet Mask : 255 255 255 0 displays the Network Selection Screen, Language Gateway : 0 0 0 0 and automatically acquires all the symbols. SecurityDNS : Manual General DNS Server : 0 0 0 0 network setting values it needs and Settings • To clear all entered letters, numbers, Support a > " ' Security Key WPS(PBC) Move Select Return connects to your network. When it is Display Security Key (0) and symbols, move to the Clear Audio v done, it displays an OK button. Press a b c All button, and then press the v Network 1 .,@ 2 abc 3 def the button on your remote. System 4 ghi 5 jkl 6 mno button. You can also just press the Language 7 pqrs 8 tuv 9 wxyz button on your remote. Press the ▼ button to go to the first 4. After the network connection is set up, Security  RED (A) 3. a/A/1/ 0 Delete General a b c entry field (IP Address). press the RETURN button to exit the Clear All Space Done Support When done, press the ( ) " ' 9. YELLOW (C) Network Setting screen. / Cursor Select Return button on your remote, or move to the 4. Use the number buttons to enter ✎ button, and then press the v numbers. NOTE Done ✎ ` button. 5. When done with each field, use the ► button ` To comply with the revised Wi-Fi standard 8. To enter the Pass Phrase, follow these The Network Connecting screen to move successively to the next field. specifications, WEP encryption of the wireless general directions: appears. You can also use the other arrow router does not support WPS connections. buttons to move up, down, and back. 11 ` 2. Insert a Blu-ray Disc that supports BD- ` If your Samsung TV has an Anynet+ logo, then Network Test LIVE. Playing content located in your it supports the Anynet+ function. Use this menu item to check whether your PC on the Blu-ray Disc Player `` Depending on your TV, certain HDMI output 3. Select an item from various BD-LIVE network connection is working or not. service contents provided by the disc You can view shared files from your computer resolutions may not work. manufacturer. on your Blu-ray Disc Player. Please refer to the user manual of your TV. ` Network Status ✎ You can get detailed instructions for using ` After the product was turned off, disconnecting and NOTE ✎ AllShare from the Samsung.com web site. connecting the power cable turns it on automatically. Use to check whether a connection to a `` The way you use BD-LIVE and the provided At the moment, it automatically turns off in about network and the Internet have been established. contents may differ, depending on the disc 15 seconds for re-establishing Anynet+ connection. Blu-ray Disc Player manufacturer. `` For some TV products, if connected to this BD-Live Internet Connection product with Anynet+ function, turning the TV on Using the AllShare Function Play back may display a warning popup message saying no Set to allow or prohibit an Internet connection PC’s files connection was found. Still, Anynet+ connection when you use the BD-LIVE service. AllShare lets you play music, video, and photo is properly established and available to use. files located in your PC or NAS on the player. AllShare Connection • Allow (All) : The Internet connection is allowed for all BD-LIVE contents. To use AllShare with your player, you must connect the player to your network (See BD Data Management • Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE pages 10~12). System Settings Enables you to manage the downloaded contents containing a valid certificate. To use AllShare with your PC, you must install contents you accessed through a Blu-ray disc AllShare software on your PC. that supports the BD-LIVE service and stored • Prohibit : No Internet connection is allowed Initial Settings on a flash drive. for any BD-LIVE content. If you have NAS, you can use AllShare without any additional software. By using the Initial Settings function, you can You can check the device’s information ✎ including the storage size, delete the BD data, NOTE set the language, Network Settings, etc. ✎ or change the Flash memory device. `` For more information about the Initial Settings What is a valid certificate? To download AllShare software function, refer to the Initial Settings section of When the player uses BD-LIVE to send the ✎ this user manual (page 8). ✎ NOTE disc data and a request to the server to certify 1. Go to Samsung.com `` In the external memory mode, disc playback the disc, the server uses the transmitted data 2. Click Support, enter your player’s may be stopped if you disconnect the USB to check if the disc is valid and sends the product number in the field that Anynet+ (HDMI-CEC) device in the middle of playback. certificate back to the player. appears, and then click Product. Anynet+ is a convenient function that offers `` Your player supports the FAT16, FAT32, and `` The Internet connection may be restricted 3. On the next screen, click Get downloads linked operations with other Samsung players NTFS file systems. We recommend you use while you are using BD-LIVE contents. under Downloads. that have the Anynet+ feature. USB devices that support USB 2.0 protocol To operate this function, connect this player to with 4 MB/sec or faster read/write speed. 4. Click Software on the next page. Using the BD-LIVE™ an Anynet+ Samsung TV with an HDMI cable. ` Click the icon in the AllShare line under With Anynet+ on, you can operate this player ` The Resume Play function may not work after Once the player is connected to the network, 5. File to start the download. using a Samsung TV remote control and start you format the storage device. you can enjoy various movie-related service disc playback simply by pressing the PLAY `` The total memory available to BD Data contents using a BD-LIVE compliant disc. ( ) button on the TV’s remote control. Management may differ, depending on the For more information, please see the TV user Attach a USB memory stick to the USB conditions. 1. manual. jack on the back of the player, and ✎ then check its remaining memory. The ✎ NOTE memory device must have at least 1GB `` This function is not available if the HDMI cable of free space to accommodate the BD- does not support CEC. LIVE services. 12 Language Settings If you forgot your password 4. The update progress popup will appear. Netflix Lock When the update is completed, the Restrict the use of the Netflix service unless You can select the language you prefer for the 1. Remove any discs. player will turn off automatically. Home menu, disc menu, etc. the 4 digit PIN is entered. @ 2. Press and hold the button on the 5. Press the POWER button to turn on the ✎ front panel for 5 seconds or more. player. NOTE ✎ VUDU Lock All settings will revert to the factory settings. ✎ `` The selected language will only appear if it is NOTE Restrict the use of the VUDU service unless ✎ supported on the disc. ✎ `` The Update is complete when the player turns the 4 digit PIN is entered. ✎ NOTE `` When the factory default settings are restored, off after restarting. Press the POWER button to all the user stored BD data will be deleted. turn on the updated player for your use. Security Settings Pandora Lock `` Never turn the player off or back on manually Restrict the use of the Pandora service unless during the update process. When you access this function for the first the 4 digit PIN is entered. General Settings time, the PIN screen appears. Enter the `` Samsung Electronics takes no legal default PIN - 0000 - using the number YouTube Lock responsibility for player malfunction caused by buttons. To change the PIN, use the Change Time Zone an unstable Internet connection or consumer PIN function (page 13). Each time you access Restrict the use of the YouTube service unless You can specify the time zone that is negligence during a software upgrade. the Security Settings hereafter, you must the 4 digit PIN is entered. applicable to your area. ` enter that four digit PIN. If you don’t change ` If you want to cancel the upgrade while the upgrade software is downloading, press the the PIN, continue using the default PIN. Change PIN v Support Settings button. Change the 4-digit password used to access BD Parental Rating security functions. By USB Prevent playback of Blu-ray Discs with specific To change the PIN, follow these steps: Software Upgrade To upgrade by USB, follow these steps: age ratings unless the 4 digit PIN is entered. The Software Upgrade menu allows you to 1. Select Change PIN, and then press the 1. Visit www.samsung.com/bluraysupport. v button. The Enter old PIN screen upgrade the player’s software for performance DVD Parental Rating improvements or additional services. 2. Download the latest USB software appears. upgrade zip archive to your computer. This function works in conjunction with DVDs Enter the old PIN. If you never changed 2. By Online Unzip the zip archive to your computer. that have been assigned an age rating or the PIN, enter the default PIN: 0000. 3. To upgrade By Online, follow these steps: You should have a single RUF file with numeric rating that indicates the maturity level The Enter new PIN screen appears. the same name as the zip file. of the content. These numbers help you control 1. Select By Online, and then press the 3. Enter the new PIN in the Enter new PIN v the types of DVDs that your family can watch. fields. button. The Connecting to Server 4. Copy the RUF file to a USB flash drive. Select the rating level you want to set. message appears. Re-enter the new PIN in the Confirm 5. Make sure there is no disc in the player, For example, if you select Level 6, discs rated 4. new PIN fields. The “PIN is changed 2. A popup message will appear if an and then insert the USB flash drive into above 6 - Level 7 and 8 - will not play. successfully.” message appears. update is available. the USB port of the player. A larger number indicates more mature content. v 5. Press the button. 3. If you select Yes, the player will turn off 6. In the player’s menu, go to Settings > automatically before restarting. Support > Software Upgrade. CinemaNow Lock (Never turn the player on during an 7. Select By USB. Restrict the use of the CinemaNow service upgrade.) unless the 4 digit PIN is entered

13 ✎ ✎ NOTE NOTE ✎ ✎ ` `` No disc should be in the product when you ` The update is complete when the player turns upgrade the software using the USB Host jack. off after restarting. Press the POWER button to Media Play turn on the updated player for your use. `` When the software upgrade is done, check the ` Insert a Disc PANDORA ` Never turn the player off or on manually during internet radio YouTube software details in the software Upgrade menu. HD Movies CinemaNow the update process. ` 8 ` Do not turn off the player during the software `` Samsung Electronics takes no legal 1. Press the button to open the disc upgrade. It may cause the player to malfunction. responsibility for player malfunction caused by tray. ` ` Software upgrades using the USB Host jack an unstable Internet connection or consumer 2. Push a disc gently into the disc tray with No Disc must be performed with a USB flash memory negligence during software upgrade. the disc's label facing up. 123 stick only. 8 DLNA Press the button to close the disc a c d " 3. 123 Change Device Safely Remove USB View Devices Enter Contact Samsung tray. Playback starts automatically. Auto Upgrade Notification Provides contact information for assistance If playback does not start automatically, 5. Press the ▲▼ buttons to select USB, 4. v If you have connected the player to your with your player. select the Videos option on the Main then press the button. network, and then set Auto Upgrade screen, and then press the v button. Press the ◄► buttons to select Videos, Notification on, the player automatically 6. Music or Photos, then press the v notifies you when a new software version is Terms of Service Agreement button. Go to Step 7. available for the player. View the general disclaimer regarding third Insert a USB Device 4-1. If you pressed the BLUE (D) button, the To set Auto Upgrade Notification on, follow party contents and services. -1 these steps: You can play multimedia files located on a screen below appears. Go to 5 . Select , and USB storage device. 1. Auto Upgrade Notification Reset PANDORA internet radio YouTube then press the v button. HD Movies CinemaNow All settings will revert to the factory default 1. Move to the Home menu. 2. Use the ▲▼ buttons to select On, and except for the network settings. In Stop mode, connect the USB storage then press the v button. 2. device to the USB port on the back 123 If there is a new software version available, panel of the player. the player notifies you with a popup message. The message “Do you want to access 1. To upgrade the firmware, select Yes the device?” will be displayed. d " in the Pop-up. The player turns off 123 Home Enter 3. Press the ◄► button to select Yes, automatically, then restarts, and begins then press the v button. the download. (Never turn on the player -1 Press the ◄► buttons to select , If you have a disc in the Blu-ray player, 5 . USB manually here.) 4. then press the v button. press the RED (A) or BLUE (D) button. 2. The update progress popup appears. If you do not, go to Step 6. 6-1. Press the ▲▼ buttons to select Videos, When the update is complete, the player Music or Photos, then press the v 3. If you pressed the RED (A) button, go to turns off again automatically. Step 5. button. 4. Press the POWER button to turn on the If you pressed the BLUE (D) button, go 7. The controls and tools you use to play player. to Step 4-1. videos, music, and pictures located on a USB device are identical to those you use to play videos, music, and pictures on a disc. (See pages 15~16)

14 ✎ 6 ✎ NOTE button Starts playback. Controlling Music Playback Repeat an Audio CD (CD-DA)/ `` You must remove the USB storage device 5 MP3 safely (by performing the “Safely Remove USB” button Stops playback. You can control the playback of music function) in order to prevent possible damage content located on a DVD, USB, or PC. 7 Pauses playback. 1. During Playlist playback, press the to the USB memory. Press the button to button MENU TOOLS button. move to the Home menu, select the YELLOW During playback, press the 3 or Buttons on the Remote Control v 4 (C) button, and then press the button. button. Playlist 1/6 used for Music Playback Tools Fast Motion 3 TRACK 001 TRACK 001 ? \ `` When Audio-CD (CD-DA), MP3 or JPEG files Each time you press the or Repeat Mode Off 05:57 Play 4 InformationTRACK 002 button, the playback speed < > ' 04:27 are in stop mode, pressing the Adjust Move Return FULL SCREEN TRACK 003 button on the remote will not bring up a full will change. 04:07 1 TRACK 004 + 03:41 screen picture. 4 00:08 / 05:57 In pause mode, press the TRACK 005 ` 03:17 ` If you insert a disc when playing a USB storage button. TRACK 006 03:35 device, the device mode changes to “DVD or Slow Motion Each time you press the 4 " ' CD Pause Tools Return CD” automatically. Play button, the playback speed will 4 change. 2 5 Press the ◄► buttons to select 7 2. Repeat Controlling Video Playback In pause mode, press the 3 6 Mode. Step Motion button. v 7 3. Press the button. You can control the playback of video content Play Each time you press the button, a new frame appears. NUMBER buttons (Audio CD (CD-DA) only) : located on a DVD, CD, or USB storage device. Songs are played in the order 1 During Playlist playback, press the desired Depending on the disc, some of the functions 1 Off During playback, press the or track number. in which they were recorded. described in this manual may not be available. 2 button. The selected track is played. ( ) One Song The current song is repeated. Skip Motion Each time you press 1 or 2 1 2 Buttons on the Remote Control Play button, the disc moves to the : During playback, press the or 2 Skip ( ) All All songs are repeated. used for Video Playback previous or next chapter or file. button to move to the previous or next file of the playlist. The random option plays ( ) Shuffle Mode 2 ww songs in random order. Using the disc menu, title menu, 3 5 button : Stops a track. popup menu, and title list Fast Play (Audio CD (CD-DA) only) 1 During playback, press this button During playback, press the 3 or 4 DISC MENU 4 button to start the disc menu function. button. Each time you press the 3 or 4 button, TITLE MENU During playback, press this button the playback speed will change. to start the title menu function. button 5 qq Pause : Pauses a track. Playback related buttons During playback, press this button POPUP MENU 6 The player does not play sound in Search, button to start the popup menu function. 6 button : Plays the currently selected Slow or Step mode. track. • To return to normal speed playback, press the 6 button.

15 Playlist Playing Photo Contents 5 Appendix 1. To move to the Music List, press the You can play photo contents located on a DVD, CD, or a USB storage device. or RETURN button. Troubleshooting The Music List screen appears. Using the Tools Menu Before requesting service, please try the following solutions. 1/2 Page Music TRACK 001 During playback, press the button. TRACK 001 TOOLS TRACK 001 02:38 02:38 PROBLEM SOLUTION TRACK 001 TRACK 001 Select to start the slide show. 02:38 02:38 Slide Show TRACK 001 TRACK 001 02:38 02:38 Select to listen to music while No operation can be • Check the batteries in the remote control. They may need replacing. TRACK 001 TRACK 001 Background 02:38 02:38 viewing a slide show. performed with the remote • Operate the remote control at a distance of no more than 20 feet. TRACK 001 TRACK 001 Music control. 02:38 02:38 • Remove batteries and hold down one or more buttons for several minutes c () ' Select to enlarge the current CD Select Jump Page Return Zoom to drain the microprocessor inside the remote control to reset it. Reinstall picture. (Enlarge up to 4 times) batteries and try to operate the remote control again.

2. Press the ▲▼◄► buttons to move Select to rotate the picture. (This to a desired track, and then press the Rotate will rotate the picture either Disc does not play. • Ensure that the disc is installed with the label side facing up. YELLOW (C) button. A check appears clockwise or counter clockwise.) • Check the region number of the Blu-ray Disc/DVD. on the track. Shows the picture information. Repeat this procedure to select Information Disc Menu does not appear. • Ensure that the disc has disc menus. additional tracks. ✎ ✎ NOTE 3. To remove a track from the list, move to `` Depending on the disc or storage device, the The prohibition message • This message appears when an invalid button is pressed. the track, and then press the YELLOW Tools menu may differ. appears on the screen. • The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles). button again. (C) `` To enable the background music function, the • You’ve requested a title or chapter number or search time that is out of range. The check on the track is cancelled. photo file must be in the same storage media v 4. When done, press the button. as the music file. Play mode differs from the • Some of the functions selected in the Setup Menu may not work properly if Setup Menu selection. the disc is not encoded with the corresponding function. 5. To go to the Music List, press the However, the sound quality can be affected RETURN button. by the bit rate of the MP3 file, the size of the ✎ photo, and the encoding method. The screen ratio cannot be • The Screen Ratio is fixed on your Blu-ray Disc/DVD. NOTE ✎ `` You can't enlarge the subtitle and PG graphic changed. • This is not a problem with the player. `` You can create a playlist with up to 99 tracks in the full screen mode. on Audio CDs (CD-DA). No audio. • Make sure you have selected the correct Digital Output in the Audio Options Menu.

The screen is blank. • If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. • Press the @ button (on front panel) for more than 5 seconds with no disc inside. All settings will revert to the factory settings. • When the factory default settings are restored, all stored user BD data is deleted. 16 PROBLEM SOLUTION PROBLEM SOLUTION

Forgot password • Press the @ button (on front panel) for more than 5 seconds with no disc BD-LIVE inside. All settings including the password will revert to the factory settings. I cannot connect to the BD- • Check whether the network connection is working or not by using the Don’t use this unless absolutely necessary. LIVE server. Network Status menu. • When the factory default settings are restored, all stored user BD data is • Check whether the USB memory device is connected to the player. deleted. • The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. If you experience other • Go to the contents and find the section of the user manual that contains the You can check the available size in BD Data Management. problems. explanations regarding the current problem, and follow the procedure once again. • Check whether the BD-LIVE Internet Connection menu is set to Allow(All). • If the problem still cannot be solved, please contact your nearest Samsung • If all above fails, contact the contents provider or update the player to the authorized service center. latest firmware.

The picture is noisy or • Make sure that the disc is not dirty or scratched. When using the BD-LIVE • The memory device must have at least 1GB of free space to accommodate service, an error occurs. the BD-LIVE service. distorted • Clean the disc. You can check the available size in BD Data Management. No HDMI output. • Check the connection between the TV and the HDMI jack of the player. ✎ • Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input NOTE ✎ ` resolutions. ` When the factory default settings are restored, all stored user BD data is deleted.

Abnormal HDMI output • If random noise appears on the screen, it means that TV does not support Repairs screen. HDCP (High-bandwidth Digital Content Protection). If you contact us to repair your player, an administration fee may be charged if either:

AllShare function 1. An engineer is called out to your home at your request and there is no defect in the product. I can see folders shared • AllShares shows only files corresponding to the Image, Music, and Movie through AllShare, but I cannot categories. Files that do not correspond to these categories are not displayed. 2. You bring the unit to a repair center and there is no defect in the product. see the files. We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player. Video is played intermittently. • Check if the network is stable. We recommend you read this manually thoroughly, search for a solution on line at www. • Check if the network cable is properly connected and if the network is not samsung.com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before overloaded. seeking to repair your player.

AllShare connection between • The IP address under the same subnetwork should be unique. If they are not, Player and PC is unstable. IP interference can cause this phenomenon. • Check if you have a firewall enabled. If so, disable the firewall function.

17 Specifications Compliance and Compatibility Notice NOT ALL discs are compatible Power Requirements AC 120V, 60Hz • Subject to the restrictions described below and those noted throughout this Manual, Power Consumption 10.5W including the Disc Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) Weight 2.2 Ibs discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs. General Dimensions 10.6 (W) X 7.6 (D) X 1.6 (H) inches • Discs other than those listed above cannot be and are not intended to be played by this player. Some of the discs listed above may not play due to one or more reasons provided Operating Temperature Range +41°F to +95°F below. Operating Humidity Range 10 % to 75 % • Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not Type A USB 2.0 USB respond to all operating commands or operate all features of every disc. These and other DC output 5V 500mA Max. disc compatibility and player operation issues with new and existing format discs are possible because: Video 1080p, 1080i, 720p, 480p HDMI -- Blu-ray is a new and evolving format and this player may not operate all features of Blu- Audio PCM, Bitstream ray Discs because some features may be optional, additional features may have been Network Wireless LAN Bulit-in added to the Blu-ray Disc format after the production of this player, and certain available features may be subject to delayed availability; -- Network speeds equal to or below 10Mbps are not supported. -- not all new and existing disc format versions are supported by this player; -- Design and specifications are subject to change without prior notice. -- new and existing disc formats may be revised, changed, updated, improved and/or -- Weight and dimensions are approximate. supplemented; -- Dispose unwanted electronics through an approved recycler. -- some discs are produced in a manner that allows specific or limited operation or restricts To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect features during playback; or call, (877) 278 - 0799 -- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos may still be non-standardized discs; -- some discs may not be played depending on their physical state or recording conditions; -- problems and errors can occur during the creation of Blu-ray Disc or DVD software and/or the manufacture of discs; -- this player operates differently than a standard DVD player or other AV equipment; and/or -- for reasons noted throughout this user manual and for other reason(s) discovered and posted by SAMSUNG customer care center. • If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer care center. You may also contact SAMSUNG customer care center for possible updates on this player. • For additional information on playback restrictions and disc compatibility, refer to the Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this user manual.

18 • For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT Network Service Disclaimer NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF All content and services accessible through this device belong to third parties and are PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER protected by copyright, patent, trademark and/or other intellectual property laws. Such SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE content and services are provided solely for your personal noncommercial use. You may not QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE use any content or services in a manner that has not been authorized by the content owner or CONTACT OUR CUSTOMER SERVICE CENTER. service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device. • Because AACS (Advanced Access Content System) is approved as the content protection THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT system for the Blu-ray Disc format, similar to use of CSS () for WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, the DVD format, certain restrictions are imposed on playback, analog signal output, etc., of FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, AACS protected contents. INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR The operation of this product and restrictions on this product may vary depending on your A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, time of purchase as those restrictions may be adopted and/or changed by AACS after the TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING content protection systems for the Blu-ray Disc format, which imposes certain restrictions NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, additional information on AACS, BD-ROM Mark, BD+, or this product, please contact ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN SAMSUNG customer care center. CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE • Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a POSSIBILITY OF SUCH DAMAGES. distorted picture from copy-protected Blu-ray Disc/DVDs. Third party services may be terminated or interrupted at any time, and Samsung makes no • Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized representation or warranty that any content or service will remain available for any period recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray of time. Content and services are transmitted by third parties by means of networks and Discs, DVDs, and other materials may subject you to civil and/or criminal liability. transmission facilities over which Samsung has no control. Without limiting the generality of • Notice : This product uses Cinavia technology to limit the use of unauthorized this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or copies of some commercially-produced film and videos and their soundtracks. When suspension of any content or service made available through this device. a prohibitet use of an unauthorized copy is detected, a message will be displayed and Samsung is neither responsible nor liable for customer service related to the content and playback or copying will be interrupted. More information about Cinavia technology is services. Any question or request for service relating to the content or services should be made provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. directly to the respective content and service providers. To request additional information about Cinavia by email, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138, USA. This product incorporates proprietary technology under licence from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All right reserved by Verance. Reverse engineering or disassembly is prohibited.

19 License LIMITED WARRANTY TO ORIGINAL PURCHASER • Manufactured under license from Dolby Laboratories. Dolby and the This SAMSUNG brand product, as supplied and this product or result in service problems; incorrect double-D symbol are trademarks of Dolby Laboratories. distributed by SAMSUNG and delivered new, in the electrical line voltage, fluctuations and surges; original carton to the original consumer purchaser, customer adjustments and failure to follow operating is warranted by SAMSUNG against manufacturing instructions, cleaning, maintenance and environmental defects in materials and workmanship for a limited instructions that are covered and prescribed in the • Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; warranty period of: instruction book; product removal or reinstallation; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the reception problems and related to noise, One (1) Year Parts and Labor* echo, interference or other signal transmission and Symbol & DTS and the Symbol together are registered trademarks & DTS (*90 Days Parts and Labor for Commercial Use) delivery problems. SAMSUNG does not warrant 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights uninterrupted or error-free operation of the product. 2.0+Digital Out This limited warranty begins on the original date of Reserved. purchase, and is valid only on products purchased and THERE ARE NO EXPRESS WARRANTIES OTHER used in the United States. To receive warranty service, THAN THOSE LISTED AND DESCRIBED ABOVE, AND • The terms HDMI and HDMI High-Definition Multimedia Interface, and the purchaser must contact SAMSUNG for problem NO WARRANTIES WHETHER EXPRESS OR IMPLIED, the HDMI Logo are trademarks or registered trademarks of HDMI determination and service procedures. Warranty INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED service can only be performed by a SAMSUNG Licensing LLC in the United States and other countries. WARRANTIES OF MERCHANTABILITY OR FITNESS authorized service center. The original dated bill of sale FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER must be presented upon request as proof of purchase THE EXPRESS WARRANTY PERIODS STATED ABOVE, • Oracle and Java are registered trademarks of Oracle and/or its affiliates. to SAMSUNG or SAMSUNG's authorized service AND NO OTHER EXPRESS WARRANTY OR GUARANTY Other names may be trademarks of their respective owners center. Transportation of the product to and from the GIVEN BY ANY PERSON, FIRM OR CORPORATION service center is the responsibility of the purchaser. WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE SAMSUNG will repair or replace this product, at FOR LOSS OF REVENUE OR PROFITS, FAILURE TO our option and at no charge as stipulated herein, REALIZE SAVINGS OR OTHER BENEFITS, OR ANY with new or reconditioned parts or products if OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL found to be defective during the limited warranty DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY period specified above. All replaced parts and TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL • Open Source License Notice products become the property of SAMSUNG and THEORY ON WHICH THE CLAIM IS BASED, AND EVEN must be returned to SAMSUNG. Replacement -- In the case of using open source software, Open Source Licenses are available on the IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY parts and products assume the remaining original OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY product menu. warranty, or ninety (90) days, whichever is longer. • Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association. KIND AGAINST SAMSUNG BE GREATER IN AMOUNT SAMSUNG’s obligations with respect to software THAN THE PURCHASE PRICE OF THE PRODUCT SOLD products distributed by SAMSUNG under the SAMSUNG BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. brand name are set forth in the applicable end user WITHOUT LIMITING THE FOREGOING, PURCHASER license agreement. Non-SAMSUNG hardware and ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE software products, if provided, are on an “AS IS” basis. OR INJURY TO PURCHASER AND PURCHASER’S Non-SAMSUNG manufacturers, suppliers, publishers, PROPERTY AND TO OTHERS AND THEIR PROPERTY and service providers may provide their own warranties. ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED This limited warranty covers manufacturing defects DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS in materials and workmanship encountered in LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE normal, and except to the extent otherwise expressly OTHER THAN THE ORIGINAL PURCHASER OF THIS provided for in this statement, noncommercial use PRODUCT, IS NONTRANSFERABLE AND STATES YOUR of this product, and shall not apply to the following, EXCLUSIVE REMEDY. including, but not limited to: damage which occurs in shipment; delivery and installation; applications and Some states do not allow limitations on how long an uses for which this product was not intended; altered implied warranty lasts, or the exclusion or limitation of product or serial numbers; cosmetic damage or incidental or consequential damages, so the above exterior finish; accidents, abuse, neglect, fire, water, limitations or exclusions may not apply to you. This lightning or other acts of nature; use of products, warranty gives you specific legal rights, and you may equipment, systems, utilities, services, parts, also have other rights which vary from state to state. supplies, accessories, applications, installations, To obtain warranty service, please contact repairs, external wiring or connectors not supplied SAMSUNG customer care center. 20 and authorized by SAMSUNG, or which damage QUESTIONS OR COMMENTS?

COUNTRY CALL OR VISIT US ONLINE AT WRITE Samsung Electronics America, Inc. 1-800-SAMSUNG IN THE US www.samsung.com 85 Challenger Road Ridgefield Park, (726-7864) NJ 07660-2112

AK68-02273A-01 AK68-02273A-00