Operating Instructions Charger’S 5V/1A USB Output Port
Total Page:16
File Type:pdf, Size:1020Kb
Turning your HALO Pocket Power 8400 ON/OFF To turn on, press the power button, and the LED lights on the side of your HALO charger will illuminate. Press and hold the power button for three seconds to turn off. Your HALO charger is also equipped with an auto on/off feature. Your charger will automatically turn on and begin charging when an electronic device is plugged in and will automatically shut off after 30 seconds if not in use. Charging your HALO Pocket Power 8400 To recharge your HALO charger, using the provided Standard USB to Micro USB cable, plug the Micro USB tip into the charger’s 5V/1A Micro Input port. Next, 8400 connect the USB end of the Standard USB to Micro USB cable into the Standard USB port on your computer or into an AC wall adapter that accepts a Standard USB connection. Your HALO charger will automatically begin charging. Charge your HALO charger for a full six hours. See Demonstration 1 on Page 6 for more information. Charging An Electronic Device Using 5V/1A Output Port For personal electronic devices with a Micro USB port, plug the Micro USB tip of the Standard USB to Micro USB cable into your electronic device. Next, plug the Standard USB end of the Standard USB to Micro USB cable into your HALO charger’s 5V/1A Output port. Your HALO charger is also compatible with the charging cable provided with your personal electronic device. To use, plug the Standard USB end of the cable into your HALO Operating Instructions charger’s 5V/1A USB output port. Charging An Electronic Device Using 5V/2A Output Port The 5V/2A port will charge the same devices as the 5V/1A port but at a faster speed. The 5V/2A port is recommend- ed when charging tablets and other larger electronic devices. Repeat the steps above under “Charging An Electronic Device Using 5V/1A OUT Port” for Micro USB port devices, but instead, plug the Standard USB end of the Standard USB to Micro USB cable into your HALO charger’s 5V/2A OUT port. Your HALO charger is also compatible with the charging cable provided with your personal electronic device. To use, plug the Standard USB end of the cable into your HALO charger’s 5V/1A USB output port. Charging Two Electronic Devices You can simultaneously charge two devices by using both the 5V/1A Output port and the 5V/2A Output port on your HALO charger. You will need to use both the provided Standard USB to Micro USB cable and the cable that came with your personal electronic device to use both Output ports at the same time. Intelligent Recognition Your HALO charger is programmed with an intelligent recognition system to achieve higher compatibility for charging different mobile phones. If it does not charge when connected to your mobile phone, please restart your HALO charger. Contents Turning your HALO Pocket Power 8400 ON/OFF To turn on, press the power button, and the LED lights on Introduction 1 the side of your HALO charger will illuminate. Press and hold the power button for three seconds to turn off. Your Operating Instructions 2-5 HALO charger is also equipped with an auto on/off feature. Your charger will automatically turn on and begin Demonstrations 6-8 charging when an electronic device is plugged in and will automatically shut off after 30 seconds if not in use. Storing/Handling/Cleaning 9 Charging your HALO Pocket Power 8400 Safety Precautions 9-10 To recharge your HALO charger, using the provided Standard USB to Micro USB cable, plug the Micro USB Specifications 10 tip into the charger’s 5V/1A Micro Input port. Next, connect the USB end of the Standard USB to Micro USB FCC Compliance Statement 11-12 cable into the Standard USB port on your computer or into an AC wall adapter that accepts a Standard USB Limited Warranty 12-14 connection. Your HALO charger will automatically begin charging. Charge your HALO charger for a full six hours. Contact Information 14 See Demonstration 1 on Page 6 for more information. Charging An Electronic Device Using 5V/1A Output Port For personal electronic devices with a Micro USB port, plug the Micro USB tip of the Standard USB to Micro USB cable into your electronic device. Next, plug the Standard USB end of the Standard USB to Micro USB To contact us, email us at cable into your HALO charger’s 5V/1A Output port. Your [email protected] HALO charger is also compatible with the charging cable or call 888-907-6274 provided with your personal electronic device. To use, plug the Standard USB end of the cable into your HALO charger’s 5V/1A USB output port. Charging An Electronic Device Using 5V/2A Output Port The 5V/2A port will charge the same devices as the 5V/1A port but at a faster speed. The 5V/2A port is recommend- ed when charging tablets and other larger electronic devices. Repeat the steps above under “Charging An Electronic Device Using 5V/1A OUT Port” for Micro USB port devices, but instead, plug the Standard USB end of the Standard USB to Micro USB cable into your HALO charger’s 5V/2A OUT port. Your HALO charger is also compatible with the charging cable provided with your personal electronic device. To use, plug the Standard USB end of the cable into your HALO charger’s 5V/1A USB output port. Charging Two Electronic Devices You can simultaneously charge two devices by using both the 5V/1A Output port and the 5V/2A Output port on your HALO charger. You will need to use both the provided Standard USB to Micro USB cable and the cable that came with your personal electronic device to use both Output ports at the same time. Intelligent Recognition Your HALO charger is programmed with an intelligent recognition system to achieve higher compatibility for charging different mobile phones. If it does not charge when connected to your mobile phone, please restart your HALO charger. What’s Included With Your HALO Pocket Power 8400 Turning your HALO Pocket Power 8400 ON/OFF To turn on, press the power button, and the LED lights on the side of your HALO charger will illuminate. Press and hold the power button for three seconds to turn off. Your HALO charger is also equipped with an auto on/off feature. Your charger will automatically turn on and begin charging when an electronic device is plugged in and will 2 automatically shut off after 30 seconds if not in use. IN 5V/1A 3 Charging your HALO Pocket Power 8400 1 OUT 5V/2A MAX OUT 5V/1A To recharge your HALO charger, using the provided Standard USB to Micro USB cable, plug the Micro USB tip into the charger’s 5V/1A Micro Input port. Next, 6 5 4 connect the USB end of the Standard USB to Micro USB cable into the Standard USB port on your computer or into an AC wall adapter that accepts a Standard USB connection. Your HALO charger will automatically begin charging. Charge your HALO charger for a full six hours. See Demonstration 1 on Page 6 for more information. 1. Power button (turn ON/OFF) Charging An Electronic Device Using 5V/1A Output 2. LED battery indicator lights Port 3. Micro USB input port (5V/1A) For personal electronic devices with a Micro USB port, 4. Standard USB output port (5V/1A) plug the Micro USB tip of the Standard USB to Micro 5. Standard USB output port (5V/2A) USB cable into your electronic device. Next, plug the 6. Standard USB to Micro USB Cable Standard USB end of the Standard USB to Micro USB cable into your HALO charger’s 5V/1A Output port. Your Included Items: HALO charger is also compatible with the charging cable - HALO Pocket Power 8400 provided with your personal electronic device. To use, - Standard USB to Micro USB Cable plug the Standard USB end of the cable into your HALO - Carrying Pouch charger’s 5V/1A USB output port. - Operating Instructions Charging An Electronic Device Using 5V/2A Output Port The 5V/2A port will charge the same devices as the 5V/1A port but at a faster speed. The 5V/2A port is recommend- ed when charging tablets and other larger electronic devices. Repeat the steps above under “Charging An Electronic Device Using 5V/1A OUT Port” for Micro USB port devices, but instead, plug the Standard USB end of the Standard USB to Micro USB cable into your HALO charger’s 5V/2A OUT port. Your HALO charger is also compatible with the charging cable provided with your personal electronic device. To use, plug the Standard USB end of the cable into your HALO charger’s 5V/1A USB output port. Charging Two Electronic Devices You can simultaneously charge two devices by using both the 5V/1A Output port and the 5V/2A Output port on your HALO charger. You will need to use both the provided Standard USB to Micro USB cable and the cable that came with your personal electronic device to use both Output ports at the same time. Intelligent Recognition Your HALO charger is programmed with an intelligent recognition system to achieve higher compatibility for charging different mobile phones. If it does not charge when connected to your mobile phone, please restart your HALO charger. Operating Instructions Turning your HALO Pocket Power 8400 ON/OFF Getting Started To turn on, press the power button, and the LED lights on Quickly press and release the power button to determine the side of your HALO charger will illuminate.