W2990 Sleigh Toddler
Total Page:16
File Type:pdf, Size:1020Kb
Toddler bed (2990) - Assembly and Operation Manual Congratulations on purchasing a MDB Family product. This bed will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This bed is for residential use only. Any institutional use is strictly prohibited. Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for the assembling of the bed. Do not use power screwdrivers. All of our toddler beds are made from natural woods. Please understand that natural woods have color variations which are the result of nature and are not defects in workmanship. DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS. Please read the Caution and Warning Statements insert before using your bed. revised 29DEC2011 page 1 PARTS C. Slats (10) D. Center slat A. Headboard B. Footboard E. Left side rail F. Right side rail HARDWARE G. 2” Allen head bolt (4) H. Barrel nut (14) K. Allen wrench J. 3 1/2” Allen head bolt (10) L. Lock washer (10) READ ALL INSTRUCTIONS BEFORE ASSEMBLING BED. WARNING: KEEP THE MANUAL FOR FUTURE USE. page 2 STEP 1. Fit the dowels of the slats (C) into the pre-drilled holes of the E left side rail (E). Attach the center slat (D) to the left side rail (E) using two 2” Allen head bolts (G) and two barrel nuts (H). C E G C G D H STEP 2. Attach the right side rail (F) in the same manner as step 1. Always be sure the slotted head of the barrel nut (H) is facing down or out. F H G G H page 3 STEP 3. A H Connect the headboard (A) to the assembled bed frame using six A 3 1/2” Allen head bolts (J), lock washers (L) and barrel nuts (H). J J J L L L H STEP 4. ConnectSTEP 4. the footboard (B) to the bed frame in the same manner as step 3. Connect the footboard (B) to the bed frame in the same manner as step 3. H B B J J J L L L Please refer to the label (sample below) on the inside face WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR of the headboard. Record the model/ item number and ALL WARRANTY AND REPLACEMENT PART REQUESTS. serial number of your crib, the name of the store where PLEASE REFER TO THE LAST PAGE OF THIS INSTRUCTION you made the purchase , the date of purchase and the SHEET FOR WARRANTY INFORMATION. KEEP THIS MANUAL wood finish in the box to the lower right. FOR FUTURE REFERENCE. “THE MATTRESS INTENDED FOR USE ON Model Number: THE BED IS TO HAVE MINIMUM DIMENSIONS OF : 51 5/8 X 27 1/4 X 4 INCHES THICK.” Serial Number: Store Where XXXX Purchased: XXXXXXXX Date of Purchase: XX/XX www.themdbfamily.com Wood Finish: SAMPLE LABEL The mattress intended for use on the bed shall be a full-size crib mattress having minimum dimensions of 51-5/8 in. (1310mm) in length, 27-1/4 in. (690mm) in width and 4 in. (100mm) in thickness, or a greater thickness not exceeding 6 in (152mm). page 4 The intended user’s minimum age must be at least 15 months old and maximum weight must not exceed 50 lbs (22.7 kg). ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of ! WARNING : purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may ENTRAPMENT/ process your warranty request. This warranty only covers new units with original packaging STRANGULATION HAZARD and ownership, and is not transferable. It does Infants have died in toddler beds from entrapment and not cover any used, secondhand or demo strangulation. models. Failure to follow these warnings and the assembly instructions could result in serious injury or death. This warranty does not cover any damaged or NEVER use bed with children under 15 months. defective parts that result from installation and NEVER place bed near windows where cords from blinds assembly, normal wear and tear, abuse, negli- or drapes may strangle a child. gence, improper use or alteration to the finish, If guard rails are used as the mattress containment means, design, and hardware of the crib. The specific legal rights of this warranty may vary from state guard rails provided must be used to avoid the formation of a to state. Some states do not allow any exclusion gap between the mattress and the bed that could cause an or limitation of incidental damages. Some States entrapment. do not allow limitation on how long an implied DO NOT place bed near windows where cords from blinds warranty lasts. or drapes may strangle a child. DO NOT place items with a string, cord, or ribbon, around a child’s neck, such as a hood strings or pacifier cords. DO NOT suspend strings over a toddler bed for any reason. ! WARNING : Failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment or strangulation. Storage: • Pine woods exchange moisture with the air adjusting to * Refer to cardboard box. major changes in room temperature and humidity. Therefore, it is best to place your furniture away from heating or Registering your product is even easier than air-conditioning vents. before. You can register your product on our • Sunlight is not friendly to solid wood furniture and prolonged website at : www.themdbfamily.com direct exposure to harsh sunlight can discolor the finish. Be IF YOU WOULD LIKE TO ORDER careful not to place your furniture in direct sunlight for REPLACEMENT OR MISSING PARTS extended periods of time. As with all your fine furniture, blot up PLEASE VISIT US AT: spills immediately. WWW.THEMDBFAMILY.COM Care and Cleaning: OR YOU CAN CONTACT US BY MAIL: • Do not scratch or chip the finish. Do not use abrasive chemi- MDB FAMILY cals for cleaning. Clean with mild soap on a soft rag. Rinse and 855 WASHINGTON BLVD. dry thoroughly. If you ever refinish this furniture, be sure to use MONTEBELLO, CA 90640 only a non-toxic finish specified for children’s products. If you choose to refinish this furniture, the warranty will be voided. HOTLINE: 1 323 728 8988 revised30AUG2011.